summaryrefslogtreecommitdiff
path: root/configs/sama5d3xek_mmc_defconfig
AgeCommit message (Collapse)Author
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_MAX_FLASH_SECT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAX_FLASH_SECT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-20configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-05configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-26timers: atmel_pit: introduce CONFIG_SPL_ATMEL_PIT_TIMEREugen Hristev
This commit allows the ATMEL_PIT_TIMER driver to be unselected in SPL and be selected in u-boot proper. The SPL can use a different timer. By having a separate Kconfig for ATMEL_TCB in SPL, the size of the SPL decreases by 0.3 KBytes. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2022-04-26configs: at91: Enable SYSRESET for Atmel/Microchip's platformsSergiu Moga
This commit enables SYSRESET in the defconfigs for the Atmel/Microchip platforms. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
2022-04-20Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000Tom Rini
The most commonly used value today is 0x2000 and not 0x400. Rework the Kconfig logic to use this more frequently used value as the default. Cc: Andrew F. Davis <afd@ti.com> Cc: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alison Wang <alison.wang@nxp.com> Cc: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Cc: Andes <uboot@andestech.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Bharat Gooty <bharat.gooty@broadcom.com> Cc: David Lechner <david@lechnology.com> Cc: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Cc: Eugeniy Paltsev <paltsev@synopsys.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Gerald Kerma <dreagle@doukki.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Holger Brunck <holger.brunck@hitachienergy.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Kristian Amlie <kristian.amlie@northern.tech> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Liviu Dudau <liviu.dudau@foss.arm.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org> Cc: Matthias Brugger <mbrugger@suse.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Cc: Sergey Temerkhanov <s.temerkhanov@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Bosch <stefan_b@posteo.net> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Thomas Weber <weber@corscience.de> Cc: Tony Dinh <mibodhi@gmail.com> Cc: Trevor Woerner <twoerner@gmail.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: liuhao <liuhao@phytium.com.cn> Cc: lixinde <lixinde@phytium.com.cn> Cc: shuyiqi <shuyiqi@phytium.com.cn> Cc: weichangzheng <weichangzheng@phytium.com.cn> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Kristian Amlie <kristian.amlie@northern.tech>
2022-04-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOOTP_MAY_FAIL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_LOCATIONS CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_ONFI_DETECTION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04mmc: Rename MMC_SUPPORT to MMCSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-11configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-22configs: at91: Fix the involuntarily disablement of NAND PMECCTudor Ambarus
SPL_GENERATE_ATMEL_PMECC_HEADER selects: ATMEL_NAND_HWECC [=y] && ATMEL_NAND_HW_PMECC [=y]. With the removal of SPL_GENERATE_ATMEL_PMECC_HEADER, ATMEL_NAND_HW_PMECC and ATMEL_NAND_HWECC were no longer selected. Also, when the SPL_GENERATE_ATMEL_PMECC_HEADER was removed, the configs were not updated using savedefconfig, thus the 'commit d168bcb6fe39 ("configs: Resync with savedefconfig")' further removes the CONFIG_PMECC_CAP value. Update defconfigs and add CONFIG_ATMEL_NAND_HW_PMECC, which selects ATMEL_NAND_HWECC, in order to restore NAND PMECC support. Restore CONFIG_PMECC_CAP value. Fixes: 57f76c2a47 ("configs: at91: remove SPL_GENERATE_ATMEL_PMECC_HEADER from non-nand configs") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2021-01-07arm: at91: configs: Enable CONFIG_SYS_NAND_USE_FLASH_BBT on all boardsNicolas Ferre
As highlighted by Stefan in the commit e074d0f79b2e ("arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT") it's important to use BBT when Linux enables it. We use it for a long time on all our boards. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com> Acked-by: Alexander Dahl <ada@thorsis.com>
2020-08-10configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-07Merge tag 'u-boot-atmel-2020.10-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features for 2020.10 cycle
2020-07-06configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-18configs: atmel: cleanup CONFIG_SPL_SEPARATE_BSSGregory CLEMENT
Now that CONFIG_SPL_SEPARATE_BSS is selected for all the AT91 based boards, cleanups the defconfigs by removing it. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-06-04configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-06video: enable VIDEO_ANSI and all VIDEO_BBP optionsAnatolij Gustschin
This partially reverts changes by commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional") since it caused issues with other boards (missing LCD console output on pinebook, x86 platform or sandbox). Enable all disabled options again and opt out of not supported color depth in board defconfigs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Vagrant Cascadian <vagrant@debian.org>
2020-01-22configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-06video: make BPP and ANSI configs optionalAnatolij Gustschin
Many boards do not use all selected framebuffer depth configurations, for such boards there is some unused code in video and console uclass routines. Make depth specific code optional to avoid dead code and slightly reduce binary size. Also make ANSI code optional for the same reason. When i.e. using only VIDEO_BPP16 the code size shrinks (below values when using gcc-7.3.0): $ ./tools/buildman/buildman -b video-wip -sS wandboard ... 01: Merge git://git.denx.de/u-boot-sh 02: video: add guards around 16bpp/32bbp code 03: video: make BPP and ANSI configs optional arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0 Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Tested-by: Patrice Chotard <patrice.chotard@st.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-12-03mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTDMiquel Raynal
Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-25mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to KconfigStefan Roese
Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs, headers and whitelist. Please note that this symbol already was used in Kconfig (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was not available in Kconfig. This changes now with this patch and all boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what I also need on my GARDENA AT91SAM based board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> [trini: Rework such that the configs are unchanged to start with] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-25Convert CONFIG_ARCH_CPU_INIT to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Felix Brack <fb@ltec.ch>
2019-07-09at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigsMarkus Klotzbuecher
Enable the extended ENV options for AT91 and OMAP2PLUS in order to be able to use CONFIG_ENV_UBI_* on these architectures. As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE, ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to KConfig. This migration was run using an extended moveconfig.py which evaluates expressions such as "(512 << 10)". See patch ("moveconfig: expand simple expressions"). All modified boards were built with SOURCE_DATE_EPOCH=0 before and after the change and successfully confirmed that the identical binary is generated (the only exception was igep00x0, which does not define CONFIG_ENV_IS_IN_UBI in the original board header. Once that is defined, the test passes too). hs: rebased patch to: 68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT" Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-18 06:16:54 +0000