Merge tag 'u-boot-stm32-20220907' of https://source.denx.de/u-boot/custodians/u-boot-stm

- simplify the STM32MP15x package parsing code
- remove test on CONFIG_DM_REGULATOR in stm32mp1 board
  and enable CONFIG_DM_REGULATOR for stm32f769-disco
- handle ck_usbo_48m clock provided by USBPHYC to fix the command 'usb start'
  after alignment with Linux kernel v5.19 DT (clocks = <&usbphyc>)
- Fix SYS_HZ_CLOCK value for stih410-b2260 board
- Switch STMM32MP15x DHSOM to FMC2 EBI driver
- Remove hwlocks from pinctrl in STM32MP15x to avoid issue with kernel

15 files changed, 158 insertions, 155 deletions

diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
index f88466fa60..a4ce936d7d 100644
--- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
@@ -58,7 +58,7 @@
 				vsync-len = <10>;
 				hsync-active = <0>;
 				vsync-active = <0>;
-				de-active = <0>;
+				de-active = <1>;
 				pixelclk-active = <1>;
 			};
 		};
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index a5ac62c83d..767a06ef68 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1663,7 +1663,6 @@
 			ranges = <0 0x50002000 0xa400>;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&exti 0x60 0xff>;
-			hwlocks = <&hwspinlock 0>;
 			pins-are-numbered;
 
 			gpioa: gpio@50002000 {
@@ -1796,7 +1795,6 @@
 			pins-are-numbered;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&exti 0x60 0xff>;
-			hwlocks = <&hwspinlock 0>;
 
 			gpioz: gpio@54004000 {
 				gpio-controller;
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi
index 5bc6698f87..0bcaec5019 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi
@@ -5,14 +5,6 @@
 
 #include "stm32mp15xx-dhcom-u-boot.dtsi"
 
-/ {
-	aliases {
-		/delete-property/ ethernet1;
-	};
-};
-
-/delete-node/ &ks8851;
-
 &usbotg_hs {
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index ee747a52bb..8a7156c93b 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -9,8 +9,6 @@
 #include "stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi"
 #include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi"
 
-/delete-node/ &ksz8851;
-
 / {
 	aliases {
 		i2c1 = &i2c2;
@@ -21,7 +19,6 @@
 		spi0 = &qspi;
 		usb0 = &usbotg_hs;
 		eeprom0 = &eeprom0;
-		ethernet1 = &ks8851;
 	};
 
 	config {
@@ -30,12 +27,6 @@
 		dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
 		dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>;
 	};
-
-	/* This is actually on FMC2, but we do not have bus driver for that */
-	ks8851: ks8851mll@64000000 {
-		compatible = "micrel,ks8851-mll";
-		reg = <0x64000000 0x20000>;
-	};
 };
 
 &ethernet0 {
@@ -74,11 +65,6 @@
 };
 
 &pinctrl {
-	/* These should bound to FMC2 bus driver, but we do not have one */
-	pinctrl-0 = <&fmc_pins_b &mco2_pins_a>;
-	pinctrl-1 = <&fmc_sleep_pins_b &mco2_sleep_pins_a>;
-	pinctrl-names = "default", "sleep";
-
 	mco2_pins_a: mco2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-drc-compact-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-drc-compact-u-boot.dtsi
index 407fed5616..b6a6a78647 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-drc-compact-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-drc-compact-u-boot.dtsi
@@ -5,25 +5,16 @@
 
 #include "stm32mp15xx-dhcor-u-boot.dtsi"
 
-/delete-node/ &ksz8851;
-
 / {
 	aliases {
 		mmc0 = &sdmmc1;
 		mmc1 = &sdmmc2;
 		usb0 = &usbotg_hs;
-		ethernet1 = &ks8851;
 	};
 
 	config {
 		dh,board-coding-gpios = <&gpioh 9 0>, <&gpioh 8 0>, <&gpioh 3 0>;
 	};
-
-	/* This is actually on FMC2, but we do not have bus driver for that */
-	ks8851: ks8851mll@64000000 {
-		compatible = "micrel,ks8851-mll";
-		reg = <0x64000000 0x20000>;
-	};
 };
 
 &ethernet0 {
@@ -38,13 +29,6 @@
 	};
 };
 
-&pinctrl {
-	/* These should bound to FMC2 bus driver, but we do not have one */
-	pinctrl-0 = <&fmc_pins_b>;
-	pinctrl-1 = <&fmc_sleep_pins_b>;
-	pinctrl-names = "default", "sleep";
-};
-
 &sdmmc1 {
 	u-boot,dm-spl;
 	st,use-ckin;
diff --git a/arch/arm/mach-stm32mp/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp15x.c
index a093e6163e..660c907a6b 100644
--- a/arch/arm/mach-stm32mp/stm32mp15x.c
+++ b/arch/arm/mach-stm32mp/stm32mp15x.c
@@ -274,7 +274,6 @@ static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
 	u32 cpu_type = get_cpu_type();
 	u32 ct = cpu_type & ~(BIT(7) | BIT(0));
 	u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0));
-	u32 cp = get_cpu_package();
 
 	/* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */
 	switch (ct) {
@@ -293,17 +292,9 @@ static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
 	}
 
 	/* Package */
-	switch (cp) {
-	case STM32MP15_PKG_AA_LBGA448:
-	case STM32MP15_PKG_AB_LBGA354:
-	case STM32MP15_PKG_AC_TFBGA361:
-	case STM32MP15_PKG_AD_TFBGA257:
-		*pkg = cp;
-		break;
-	default:
-		*pkg = 0;
-		break;
-	}
+	*pkg = get_cpu_package();
+	if (*pkg > STM32MP15_PKG_AA_LBGA448)
+		*pkg = STM32MP15_PKG_UNKNOWN;
 
 	/* Revision */
 	switch (get_cpu_rev()) {
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
index e3c7ed1049..9188f5381e 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -527,56 +527,6 @@ static void sysconf_init(void)
 #endif
 }
 
-static void board_init_fmc2(void)
-{
-#define STM32_FMC2_BCR1			0x0
-#define STM32_FMC2_BTR1			0x4
-#define STM32_FMC2_BWTR1		0x104
-#define STM32_FMC2_BCR(x)		((x) * 0x8 + STM32_FMC2_BCR1)
-#define STM32_FMC2_BCRx_FMCEN		BIT(31)
-#define STM32_FMC2_BCRx_WREN		BIT(12)
-#define STM32_FMC2_BCRx_RSVD		BIT(7)
-#define STM32_FMC2_BCRx_FACCEN		BIT(6)
-#define STM32_FMC2_BCRx_MWID(n)		((n) << 4)
-#define STM32_FMC2_BCRx_MTYP(n)		((n) << 2)
-#define STM32_FMC2_BCRx_MUXEN		BIT(1)
-#define STM32_FMC2_BCRx_MBKEN		BIT(0)
-#define STM32_FMC2_BTR(x)		((x) * 0x8 + STM32_FMC2_BTR1)
-#define STM32_FMC2_BTRx_DATAHLD(n)	((n) << 30)
-#define STM32_FMC2_BTRx_BUSTURN(n)	((n) << 16)
-#define STM32_FMC2_BTRx_DATAST(n)	((n) << 8)
-#define STM32_FMC2_BTRx_ADDHLD(n)	((n) << 4)
-#define STM32_FMC2_BTRx_ADDSET(n)	((n) << 0)
-
-#define RCC_MP_AHB6RSTCLRR		0x218
-#define RCC_MP_AHB6RSTCLRR_FMCRST	BIT(12)
-#define RCC_MP_AHB6ENSETR		0x19c
-#define RCC_MP_AHB6ENSETR_FMCEN		BIT(12)
-
-	const u32 bcr = STM32_FMC2_BCRx_WREN |STM32_FMC2_BCRx_RSVD |
-			STM32_FMC2_BCRx_FACCEN | STM32_FMC2_BCRx_MWID(1) |
-			STM32_FMC2_BCRx_MTYP(2) | STM32_FMC2_BCRx_MUXEN |
-			STM32_FMC2_BCRx_MBKEN;
-	const u32 btr = STM32_FMC2_BTRx_DATAHLD(3) |
-			STM32_FMC2_BTRx_BUSTURN(2) |
-			STM32_FMC2_BTRx_DATAST(0x22) |
-			STM32_FMC2_BTRx_ADDHLD(2) |
-			STM32_FMC2_BTRx_ADDSET(2);
-
-	/* Set up FMC2 bus for KS8851-16MLL and X11 SRAM */
-	writel(RCC_MP_AHB6RSTCLRR_FMCRST, STM32_RCC_BASE + RCC_MP_AHB6RSTCLRR);
-	writel(RCC_MP_AHB6ENSETR_FMCEN, STM32_RCC_BASE + RCC_MP_AHB6ENSETR);
-
-	/* KS8851-16MLL -- Muxed mode */
-	writel(bcr, STM32_FMC2_BASE + STM32_FMC2_BCR(1));
-	writel(btr, STM32_FMC2_BASE + STM32_FMC2_BTR(1));
-	/* AS7C34098 SRAM on X11 -- Muxed mode */
-	writel(bcr, STM32_FMC2_BASE + STM32_FMC2_BCR(3));
-	writel(btr, STM32_FMC2_BASE + STM32_FMC2_BTR(3));
-
-	setbits_le32(STM32_FMC2_BASE + STM32_FMC2_BCR1, STM32_FMC2_BCRx_FMCEN);
-}
-
 #ifdef CONFIG_DM_REGULATOR
 #define STPMIC_NVM_BUCKS_VOUT_SHR			0xfc
 #define STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_1V2		0
@@ -671,8 +621,6 @@ int board_init(void)
 
 	sysconf_init();
 
-	board_init_fmc2();
-
 	return 0;
 }
 
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 9496890d16..8c162b42a5 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -494,7 +494,7 @@ static void sysconf_init(void)
 	ret = uclass_get_device_by_driver(UCLASS_PMIC,
 					  DM_DRIVER_GET(stm32mp_pwr_pmic),
 					  &pwr_dev);
-	if (!ret && IS_ENABLED(CONFIG_DM_REGULATOR)) {
+	if (!ret) {
 		ret = uclass_get_device_by_driver(UCLASS_MISC,
 						  DM_DRIVER_GET(stm32mp_bsec),
 						  &dev);
@@ -555,9 +555,6 @@ static int board_stm32mp15x_dk2_init(void)
 	struct gpio_desc hdmi, audio;
 	int ret = 0;
 
-	if (!IS_ENABLED(CONFIG_DM_REGULATOR))
-		return -ENODEV;
-
 	/* Fix to make I2C1 usable on DK2 for touchscreen usage in kernel */
 	node = ofnode_path("/soc/i2c@40012000/hdmi-transmitter@39");
 	if (!ofnode_valid(node)) {
@@ -658,8 +655,7 @@ int board_init(void)
 	if (board_is_stm32mp15x_dk2())
 		board_stm32mp15x_dk2_init();
 
-	if (IS_ENABLED(CONFIG_DM_REGULATOR))
-		regulators_enable_boot_on(_DEBUG);
+	regulators_enable_boot_on(_DEBUG);
 
 	/*
 	 * sysconf initialisation done only when U-Boot is running in secure
diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig
index 1333c060d1..423af7446a 100644
--- a/configs/stm32f769-disco_defconfig
+++ b/configs/stm32f769-disco_defconfig
@@ -50,6 +50,7 @@ CONFIG_ETH_DESIGNWARE=y
 CONFIG_DW_ALTDESCRIPTOR=y
 CONFIG_MII=y
 # CONFIG_PINCTRL_FULL is not set
+CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_STM32_QSPI=y
diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
index 16763e29c3..80d411a769 100644
--- a/configs/stm32f769-disco_spl_defconfig
+++ b/configs/stm32f769-disco_spl_defconfig
@@ -71,6 +71,7 @@ CONFIG_ETH_DESIGNWARE=y
 CONFIG_DW_ALTDESCRIPTOR=y
 CONFIG_MII=y
 # CONFIG_PINCTRL_FULL is not set
+CONFIG_DM_REGULATOR=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_SPL_RAM=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index e1a557ec00..f47e70be44 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -108,6 +108,7 @@ CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_STM32F7=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
+CONFIG_STM32_FMC2_EBI=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_SUPPORT_EMMC_BOOT=y
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index 81eabeb358..02cce50691 100644
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -105,6 +105,7 @@ CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_STM32F7=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
+CONFIG_STM32_FMC2_EBI=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x53
 CONFIG_SUPPORT_EMMC_BOOT=y
diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c
index 452550066e..4f4524fcb2 100644
--- a/drivers/clk/stm32/clk-stm32mp1.c
+++ b/drivers/clk/stm32/clk-stm32mp1.c
@@ -962,6 +962,24 @@ static ulong stm32mp1_read_pll_freq(struct stm32mp1_clk_priv *priv,
 	return dfout;
 }
 
+static ulong stm32mp1_clk_get_by_name(const char *name)
+{
+	struct clk clk;
+	struct udevice *dev = NULL;
+	ulong clock = 0;
+
+	if (!uclass_get_device_by_name(UCLASS_CLK, name, &dev)) {
+		if (clk_request(dev, &clk)) {
+			log_err("%s request", name);
+		} else {
+			clk.id = 0;
+			clock = clk_get_rate(&clk);
+		}
+	}
+
+	return clock;
+}
+
 static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)
 {
 	u32 reg;
@@ -1127,24 +1145,11 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)
 		break;
 	/* other */
 	case _USB_PHY_48:
-		clock = 48000000;
+		clock = stm32mp1_clk_get_by_name("ck_usbo_48m");
 		break;
 	case _DSI_PHY:
-	{
-		struct clk clk;
-		struct udevice *dev = NULL;
-
-		if (!uclass_get_device_by_name(UCLASS_CLK, "ck_dsi_phy",
-					       &dev)) {
-			if (clk_request(dev, &clk)) {
-				log_err("ck_dsi_phy request");
-			} else {
-				clk.id = 0;
-				clock = clk_get_rate(&clk);
-			}
-		}
+		clock = stm32mp1_clk_get_by_name("ck_dsi_phy");
 		break;
-	}
 	default:
 		break;
 	}
diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c
index d7f7c37f91..9f0b7d7118 100644
--- a/drivers/phy/phy-stm32-usbphyc.c
+++ b/drivers/phy/phy-stm32-usbphyc.c
@@ -7,6 +7,7 @@
 
 #include <common.h>
 #include <clk.h>
+#include <clk-uclass.h>
 #include <div64.h>
 #include <dm.h>
 #include <fdtdec.h>
@@ -17,6 +18,7 @@
 #include <usb.h>
 #include <asm/io.h>
 #include <dm/device_compat.h>
+#include <dm/lists.h>
 #include <dm/of_access.h>
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
@@ -72,6 +74,9 @@
 #define PLL_INFF_MIN_RATE	19200000 /* in Hz */
 #define PLL_INFF_MAX_RATE	38400000 /* in Hz */
 
+/* USBPHYC_CLK48 */
+#define USBPHYC_CLK48_FREQ	48000000 /* in Hz */
+
 enum boosting_vals {
 	BOOST_1000_UA = 1000,
 	BOOST_2000_UA = 2000,
@@ -144,6 +149,7 @@ struct stm32_usbphyc {
 		bool init;
 		bool powered;
 	} phys[MAX_PHYS];
+	int n_pll_cons;
 };
 
 static void stm32_usbphyc_get_pll_params(u32 clk_rate,
@@ -203,18 +209,6 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
 	return 0;
 }
 
-static bool stm32_usbphyc_is_init(struct stm32_usbphyc *usbphyc)
-{
-	int i;
-
-	for (i = 0; i < MAX_PHYS; i++) {
-		if (usbphyc->phys[i].init)
-			return true;
-	}
-
-	return false;
-}
-
 static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc)
 {
 	int i;
@@ -227,18 +221,17 @@ static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc)
 	return false;
 }
 
-static int stm32_usbphyc_phy_init(struct phy *phy)
+static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
 {
-	struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
-	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
 	bool pllen = readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN ?
 		     true : false;
 	int ret;
 
-	dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
-	/* Check if one phy port has already configured the pll */
-	if (pllen && stm32_usbphyc_is_init(usbphyc))
-		goto initialized;
+	/* Check if one consumer has already configured the pll */
+	if (pllen && usbphyc->n_pll_cons) {
+		usbphyc->n_pll_cons++;
+		return 0;
+	}
 
 	if (usbphyc->vdda1v1) {
 		ret = regulator_set_enable(usbphyc->vdda1v1, true);
@@ -269,23 +262,19 @@ static int stm32_usbphyc_phy_init(struct phy *phy)
 	if (!(readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN))
 		return -EIO;
 
-initialized:
-	usbphyc_phy->init = true;
+	usbphyc->n_pll_cons++;
 
 	return 0;
 }
 
-static int stm32_usbphyc_phy_exit(struct phy *phy)
+static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
 {
-	struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
-	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
 	int ret;
 
-	dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
-	usbphyc_phy->init = false;
+	usbphyc->n_pll_cons--;
 
-	/* Check if other phy port requires pllen */
-	if (stm32_usbphyc_is_init(usbphyc))
+	/* Check if other consumer requires pllen */
+	if (usbphyc->n_pll_cons)
 		return 0;
 
 	clrbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
@@ -314,6 +303,42 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
 	return 0;
 }
 
+static int stm32_usbphyc_phy_init(struct phy *phy)
+{
+	struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
+	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
+	int ret;
+
+	dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
+	if (usbphyc_phy->init)
+		return 0;
+
+	ret = stm32_usbphyc_pll_enable(usbphyc);
+	if (ret)
+		return log_ret(ret);
+
+	usbphyc_phy->init = true;
+
+	return 0;
+}
+
+static int stm32_usbphyc_phy_exit(struct phy *phy)
+{
+	struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
+	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
+	int ret;
+
+	dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
+	if (!usbphyc_phy->init)
+		return 0;
+
+	ret = stm32_usbphyc_pll_disable(usbphyc);
+
+	usbphyc_phy->init = false;
+
+	return log_ret(ret);
+}
+
 static int stm32_usbphyc_phy_power_on(struct phy *phy)
 {
 	struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
@@ -498,6 +523,16 @@ static const struct phy_ops stm32_usbphyc_phy_ops = {
 	.of_xlate = stm32_usbphyc_of_xlate,
 };
 
+static int stm32_usbphyc_bind(struct udevice *dev)
+{
+	int ret;
+
+	ret = device_bind_driver_to_node(dev, "stm32-usbphyc-clk", "ck_usbo_48m",
+					 dev_ofnode(dev), NULL);
+
+	return log_ret(ret);
+}
+
 static int stm32_usbphyc_probe(struct udevice *dev)
 {
 	struct stm32_usbphyc *usbphyc = dev_get_priv(dev);
@@ -591,6 +626,70 @@ U_BOOT_DRIVER(stm32_usb_phyc) = {
 	.id = UCLASS_PHY,
 	.of_match = stm32_usbphyc_of_match,
 	.ops = &stm32_usbphyc_phy_ops,
+	.bind = stm32_usbphyc_bind,
 	.probe = stm32_usbphyc_probe,
 	.priv_auto	= sizeof(struct stm32_usbphyc),
 };
+
+struct stm32_usbphyc_clk {
+	bool enable;
+};
+
+static ulong stm32_usbphyc_clk48_get_rate(struct clk *clk)
+{
+	return USBPHYC_CLK48_FREQ;
+}
+
+static int stm32_usbphyc_clk48_enable(struct clk *clk)
+{
+	struct stm32_usbphyc_clk *usbphyc_clk = dev_get_priv(clk->dev);
+	struct stm32_usbphyc *usbphyc;
+	int ret;
+
+	if (usbphyc_clk->enable)
+		return 0;
+
+	usbphyc = dev_get_priv(clk->dev->parent);
+
+	/* ck_usbo_48m is generated by usbphyc PLL */
+	ret = stm32_usbphyc_pll_enable(usbphyc);
+	if (ret)
+		return ret;
+
+	usbphyc_clk->enable = true;
+
+	return 0;
+}
+
+static int stm32_usbphyc_clk48_disable(struct clk *clk)
+{
+	struct stm32_usbphyc_clk *usbphyc_clk = dev_get_priv(clk->dev);
+	struct stm32_usbphyc *usbphyc;
+	int ret;
+
+	if (!usbphyc_clk->enable)
+		return 0;
+
+	usbphyc = dev_get_priv(clk->dev->parent);
+
+	ret = stm32_usbphyc_pll_disable(usbphyc);
+	if (ret)
+		return ret;
+
+	usbphyc_clk->enable = false;
+
+	return 0;
+}
+
+const struct clk_ops usbphyc_clk48_ops = {
+	.get_rate = stm32_usbphyc_clk48_get_rate,
+	.enable = stm32_usbphyc_clk48_enable,
+	.disable = stm32_usbphyc_clk48_disable,
+};
+
+U_BOOT_DRIVER(stm32_usb_phyc_clk) = {
+	.name = "stm32-usbphyc-clk",
+	.id = UCLASS_CLK,
+	.ops = &usbphyc_clk48_ops,
+	.priv_auto = sizeof(struct stm32_usbphyc_clk),
+};
diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h
index b1a011bacb..1e966a2322 100644
--- a/include/configs/stih410-b2260.h
+++ b/include/configs/stih410-b2260.h
@@ -14,7 +14,7 @@
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define PHYS_SDRAM_1_SIZE		0x3E000000
 
-#define CONFIG_SYS_HZ_CLOCK		1000000000	/* 1 GHz */
+#define CONFIG_SYS_HZ_CLOCK		750000000	/* 750 MHz */
 
 /* Environment */