Merge tag 'xilinx-for-v2020.07-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2020.07-rc2

mmc:
- Fix dt property handling via generic function

clk:
- Fix versal watchdog clock setting

nand:
- Fix zynq nand command comparison

xilinx:
- Enable ubifs
- Sync board_late_init configurations with initrd_high setup
- Make custom distro boot more verbose

zynq:
- Kconfig alignments
- Fix nand cse configuration

zynqmp:
- Fix zcu104 low level qspi configuration
- Small DT updates

Signed-off-by: Tom Rini <trini@konsulko.com>

27 files changed, 165 insertions, 98 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1bcf345028..8e67e1c587 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -475,7 +475,7 @@ config TPL_USE_ARCH_MEMSET
 
 config SET_STACK_SIZE
 	bool "Enable an option to set max stack size that can be used"
-	default y if ARCH_VERSAL || ARCH_ZYNQMP
+	default y if ARCH_VERSAL || ARCH_ZYNQMP || ARCH_ZYNQ
 	help
 	  This will enable an option to set max stack size that can be
 	  used by U-Boot.
@@ -484,6 +484,7 @@ config STACK_SIZE
 	hex "Define max stack size that can be used by U-Boot"
 	depends on SET_STACK_SIZE
 	default 0x4000000 if ARCH_VERSAL || ARCH_ZYNQMP
+	default 0x1000000 if ARCH_ZYNQ
 	help
 	  Define Max stack size that can be used by U-Boot so that the
 	  initrd_high will be calculated as base stack pointer minus this
diff --git a/arch/arm/dts/zynq-cse-nand.dts b/arch/arm/dts/zynq-cse-nand.dts
index 1e16d7fab9..32cb3bffcb 100644
--- a/arch/arm/dts/zynq-cse-nand.dts
+++ b/arch/arm/dts/zynq-cse-nand.dts
@@ -38,6 +38,21 @@
 		#size-cells = <1>;
 		ranges;
 
+		smcc: memory-controller@e000e000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-names = "memclk", "apb_pclk";
+			clocks = <&clkc 11>, <&clkc 44>;
+			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+			ranges;
+			reg = <0xe000e000 0x1000>;
+
+			nand0: flash@e1000000 {
+				compatible = "arm,pl353-nand-r2p1";
+				reg = <0xe1000000 0x1000000>;
+			};
+		};
+
 		slcr: slcr@f8000000 {
 			u-boot,dm-pre-reloc;
 			#address-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
index 39b5d7fff9..bf982e2218 100644
--- a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
@@ -162,9 +162,9 @@
 		  "", "", "", "", "", /* 65 - 69 */
 		  "", "", "", "", "", /* 70 - 74 */
 		  "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
-		  "", "", /* 78 - 79 */
-		  "", "", "", "", "", /* 80 - 84 */
-		  "", "", "", "", "", /* 85 -89 */
+		  "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
+		  "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "", "", /* 80 - 84 */
+		  "", "", "", "", "", /* 85 - 89 */
 		  "", "", "", "", "", /* 90 - 94 */
 		  "", "", "", "", "", /* 95 - 99 */
 		  "", "", "", "", "", /* 100 - 104 */
@@ -198,9 +198,6 @@
 			#size-cells = <0>;
 			reg = <0>;
 			/* u152 IR35215 0x16/0x46 vcc_soc */
-			/* u160 IRPS5401 0x17/0x47 */
-			/* u167 IRPS5401 0x1c/0x4c */
-			/* u175 IRPS5401 0x1d/0x4d */
 			/* u179 ir38164 0x19/0x49 vcco_500 */
 			/* u181 ir38164 0x1a/0x4a vcco_501 */
 			/* u183 ir38164 0x1b/0x4b vcco_502 */
@@ -209,6 +206,19 @@
 			/* u189 ir38164 0x20/0x50 mgtyavtt */
 			/* u194 ir38164 0x13/0x43 vdd1_1v8_lp4 */
 			/* u195 ir38164 0x14/0x44 vdd2_1v8_lp4 */
+
+			irps5401_47: irps5401@47 { /* IRPS5401 - u160 */
+				compatible = "infineon,irps5401";
+				reg = <0x47>; /* pmbus / i2c 0x17 */
+			};
+			irps5401_4c: irps5401@4c { /* IRPS5401 - u167 */
+				compatible = "infineon,irps5401";
+				reg = <0x4c>; /* pmbus / i2c 0x1c */
+			};
+			irps5401_4d: irps5401@4d { /* IRPS5401 - u175 */
+				compatible = "infineon,irps5401";
+				reg = <0x4d>; /* pmbus / i2c 0x1d */
+			};
 		};
 		i2c@1 { /* PMBUS1_INA226 */
 			#address-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 3ceb39dce0..a4bd6b800a 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -147,15 +147,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			irps5401_43: irps54012@43 { /* IRPS5401 - u175 */
-				#clock-cells = <0>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
 				compatible = "infineon,irps5401";
-				reg = <0x43>;
+				reg = <0x43>; /* pmbus / i2c 0x13 */
 			};
-			irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */
-				#clock-cells = <0>;
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
 				compatible = "infineon,irps5401";
-				reg = <0x4d>;
+				reg = <0x44>; /* pmbus / i2c 0x14 */
 			};
 		};
 
diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 7dad4523de..d4b3769a27 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -172,15 +172,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			irps5401_43: irps54012@43 { /* IRPS5401 - u175 */
-				#clock-cells = <0>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
 				compatible = "infineon,irps5401";
-				reg = <0x43>;
+				reg = <0x43>; /* pmbus / i2c 0x13 */
 			};
-			irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */
-				#clock-cells = <0>;
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
 				compatible = "infineon,irps5401";
-				reg = <0x4d>;
+				reg = <0x44>; /* pmbus / i2c 0x14 */
 			};
 		};
 
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index d16bf8ac7a..63e285fe9a 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -327,18 +327,15 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */
-				#clock-cells = <0>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
 				compatible = "infineon,irps5401";
 				reg = <0x43>;
 			};
-			irps5401_44: irps54012@44 { /* IRPS5401 - u55 */
-				#clock-cells = <0>;
+			irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
 				compatible = "infineon,irps5401";
 				reg = <0x44>;
 			};
-			irps5401_45: irps54012@45 { /* IRPS5401 - u57 */
-				#clock-cells = <0>;
+			irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
 				compatible = "infineon,irps5401";
 				reg = <0x45>;
 			};
diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts
index 75ecd7a5c2..118a2de96b 100644
--- a/arch/arm/dts/zynqmp-zcu208-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu208-revA.dts
@@ -351,13 +351,11 @@
 			/* u112 - ir38164 0x13/0x43 */
 			/* u123 - ir38164 0x1c/0x4c */
 
-			irps5401_44: irps54012@44 { /* IRPS5401 - u53 */
-				#clock-cells = <0>;
+			irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
 				compatible = "infineon,irps5401";
 				reg = <0x44>; /* i2c addr 0x14 */
 			};
-			irps5401_45: irps54012@45 { /* IRPS5401 - u55 */
-				#clock-cells = <0>;
+			irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
 				compatible = "infineon,irps5401";
 				reg = <0x45>; /* i2c addr 0x15 */
 			};
diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts
index f3b5edfeb4..e454bfcba7 100644
--- a/arch/arm/dts/zynqmp-zcu216-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu216-revA.dts
@@ -355,13 +355,11 @@
 			/* u112 - ir38164 0x13/0x43 */
 			/* u123 - ir38164 0x1c/0x4c */
 
-			irps5401_44: irps54012@44 { /* IRPS5401 - u53 */
-				#clock-cells = <0>;
+			irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
 				compatible = "infineon,irps5401";
 				reg = <0x44>; /* i2c addr 0x14 */
 			};
-			irps5401_45: irps54012@45 { /* IRPS5401 - u55 */
-				#clock-cells = <0>;
+			irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
 				compatible = "infineon,irps5401";
 				reg = <0x45>; /* i2c addr 0x15 */
 			};
diff --git a/board/bitmain/antminer_s9/Makefile b/board/bitmain/antminer_s9/Makefile
index 93a1e77f72..1af01d6d80 100644
--- a/board/bitmain/antminer_s9/Makefile
+++ b/board/bitmain/antminer_s9/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 obj-y	:= board.o
+obj-y	+= ../../xilinx/common/board.o
 
 # Remove quotes
 hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE))
diff --git a/board/topic/zynq/Makefile b/board/topic/zynq/Makefile
index becadd2ca7..cc100b0f42 100644
--- a/board/topic/zynq/Makefile
+++ b/board/topic/zynq/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 obj-y	:= board.o
+obj-y	+= ../../xilinx/common/board.o
 
 # Remove quotes
 hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE))
diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index e83c692f21..294a59df77 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -8,6 +8,8 @@
 #include <asm/sections.h>
 #include <dm/uclass.h>
 #include <i2c.h>
+#include <linux/sizes.h>
+#include "board.h"
 
 int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 {
@@ -71,3 +73,16 @@ void *board_fdt_blob_setup(void)
 	return NULL;
 }
 #endif
+
+int board_late_init_xilinx(void)
+{
+	ulong initrd_hi;
+
+	env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
+
+	initrd_hi = gd->start_addr_sp - CONFIG_STACK_SIZE;
+	initrd_hi = round_down(initrd_hi, SZ_16M);
+	env_set_addr("initrd_high", (void *)initrd_hi);
+
+	return 0;
+}
diff --git a/board/xilinx/common/board.h b/board/xilinx/common/board.h
new file mode 100644
index 0000000000..180dfbca10
--- /dev/null
+++ b/board/xilinx/common/board.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2020 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#ifndef _BOARD_XILINX_COMMON_BOARD_H
+#define _BOARD_XILINX_COMMON_BOARD_H
+
+int board_late_init_xilinx(void);
+
+#endif /* BOARD_XILINX_COMMON_BOARD_H */
diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c
index 75aedb0929..483e3ce2f7 100644
--- a/board/xilinx/versal/board.c
+++ b/board/xilinx/versal/board.c
@@ -16,7 +16,7 @@
 #include <dm/device.h>
 #include <dm/uclass.h>
 #include <versalpl.h>
-#include <linux/sizes.h>
+#include "../common/board.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -82,9 +82,23 @@ int board_early_init_r(void)
 	return 0;
 }
 
-int board_late_init(void)
+static u8 versal_get_bootmode(void)
 {
+	u8 bootmode;
 	u32 reg = 0;
+
+	reg = readl(&crp_base->boot_mode_usr);
+
+	if (reg >> BOOT_MODE_ALT_SHIFT)
+		reg >>= BOOT_MODE_ALT_SHIFT;
+
+	bootmode = reg & BOOT_MODES_MASK;
+
+	return bootmode;
+}
+
+int board_late_init(void)
+{
 	u8 bootmode;
 	struct udevice *dev;
 	int bootseq = -1;
@@ -93,19 +107,13 @@ int board_late_init(void)
 	const char *mode;
 	char *new_targets;
 	char *env_targets;
-	ulong initrd_hi;
 
 	if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
 		debug("Saved variables - Skipping\n");
 		return 0;
 	}
 
-	reg = readl(&crp_base->boot_mode_usr);
-
-	if (reg >> BOOT_MODE_ALT_SHIFT)
-		reg >>= BOOT_MODE_ALT_SHIFT;
-
-	bootmode = reg & BOOT_MODES_MASK;
+	bootmode = versal_get_bootmode();
 
 	puts("Bootmode: ");
 	switch (bootmode) {
@@ -200,13 +208,7 @@ int board_late_init(void)
 
 	env_set("boot_targets", new_targets);
 
-	initrd_hi = gd->start_addr_sp - CONFIG_STACK_SIZE;
-	initrd_hi = round_down(initrd_hi, SZ_16M);
-	env_set_addr("initrd_high", (void *)initrd_hi);
-
-	env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
-
-	return 0;
+	return board_late_init_xilinx();
 }
 
 int dram_init_banksize(void)
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 420a5ca663..2164eac8d5 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -17,6 +17,7 @@
 #include <zynqpl.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/sys_proto.h>
+#include "../common/board.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -76,9 +77,7 @@ int board_late_init(void)
 
 	env_set("boot_targets", new_targets);
 
-	env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
-
-	return 0;
+	return board_late_init_xilinx();
 }
 
 #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
diff --git a/board/xilinx/zynqmp/zynqmp-zcu104-revA/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-zcu104-revA/psu_init_gpl.c
index 4805e5a3b9..383e3d0c7e 100644
--- a/board/xilinx/zynqmp/zynqmp-zcu104-revA/psu_init_gpl.c
+++ b/board/xilinx/zynqmp/zynqmp-zcu104-revA/psu_init_gpl.c
@@ -363,6 +363,7 @@ static unsigned long psu_mio_init_data(void)
 	psu_mask_write(0xFF18000C, 0x000000FEU, 0x00000002U);
 	psu_mask_write(0xFF180010, 0x000000FEU, 0x00000002U);
 	psu_mask_write(0xFF180014, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180018, 0x000000FEU, 0x00000002U);
 	psu_mask_write(0xFF180040, 0x000000FEU, 0x00000040U);
 	psu_mask_write(0xFF180044, 0x000000FEU, 0x00000040U);
 	psu_mask_write(0xFF180048, 0x000000FEU, 0x000000C0U);
@@ -408,7 +409,7 @@ static unsigned long psu_mio_init_data(void)
 	psu_mask_write(0xFF18012C, 0x000000FEU, 0x00000002U);
 	psu_mask_write(0xFF180130, 0x000000FEU, 0x000000C0U);
 	psu_mask_write(0xFF180134, 0x000000FEU, 0x000000C0U);
-	psu_mask_write(0xFF180204, 0x7B3F003FU, 0x52240000U);
+	psu_mask_write(0xFF180204, 0x7B3F007FU, 0x52240000U);
 	psu_mask_write(0xFF180208, 0xFFFFE000U, 0x00B02000U);
 	psu_mask_write(0xFF18020C, 0x00003FFFU, 0x00000FC0U);
 	psu_mask_write(0xFF180138, 0x03FFFFFFU, 0x03FFFFFFU);
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 3c92b1a582..a2a0d56331 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -26,7 +26,7 @@
 #include <zynqmppl.h>
 #include <zynqmp_firmware.h>
 #include <g_dnl.h>
-#include <linux/sizes.h>
+#include "../common/board.h"
 
 #include "pm_cfg_obj.h"
 
@@ -552,9 +552,26 @@ static int set_fdtfile(void)
 	return 0;
 }
 
-int board_late_init(void)
+static u8 zynqmp_get_bootmode(void)
 {
+	u8 bootmode;
 	u32 reg = 0;
+	int ret;
+
+	ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, &reg);
+	if (ret)
+		return -EINVAL;
+
+	if (reg >> BOOT_MODE_ALT_SHIFT)
+		reg >>= BOOT_MODE_ALT_SHIFT;
+
+	bootmode = reg & BOOT_MODES_MASK;
+
+	return bootmode;
+}
+
+int board_late_init(void)
+{
 	u8 bootmode;
 	struct udevice *dev;
 	int bootseq = -1;
@@ -564,7 +581,6 @@ int board_late_init(void)
 	char *new_targets;
 	char *env_targets;
 	int ret;
-	ulong initrd_hi;
 
 #if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD)
 	usb_ether_init();
@@ -579,14 +595,7 @@ int board_late_init(void)
 	if (ret)
 		return ret;
 
-	ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, &reg);
-	if (ret)
-		return -EINVAL;
-
-	if (reg >> BOOT_MODE_ALT_SHIFT)
-		reg >>= BOOT_MODE_ALT_SHIFT;
-
-	bootmode = reg & BOOT_MODES_MASK;
+	bootmode = zynqmp_get_bootmode();
 
 	puts("Bootmode: ");
 	switch (bootmode) {
@@ -691,15 +700,9 @@ int board_late_init(void)
 
 	env_set("boot_targets", new_targets);
 
-	initrd_hi = gd->start_addr_sp - CONFIG_STACK_SIZE;
-	initrd_hi = round_down(initrd_hi, SZ_16M);
-	env_set_addr("initrd_high", (void *)initrd_hi);
-
-	env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
-
 	reset_reason();
 
-	return 0;
+	return board_late_init_xilinx();
 }
 #endif
 
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index b264529fee..7441e10d32 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -32,12 +32,17 @@ CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_NAND_LOCK_UNLOCK=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SPREAD=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
+CONFIG_CMD_UBI=y
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
 CONFIG_OF_LIST="zynq-zc702 zynq-zc706 zynq-zc770-xm010 zynq-zc770-xm011 zynq-zc770-xm011-x16 zynq-zc770-xm012 zynq-zc770-xm013 zynq-cc108 zynq-microzed zynq-minized zynq-picozed zynq-zed zynq-zturn zynq-zybo zynq-zybo-z7 zynq-dlc20-rev1.0"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 7b09edd78e..73e8d84b88 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -35,6 +35,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_NAND_LOCK_UNLOCK=y
 CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_SDRAM=y
@@ -45,6 +46,10 @@ CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
 CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SPREAD=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
+CONFIG_CMD_UBI=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
 CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA"
diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig
index 19491c9e47..6a01da2e4e 100644
--- a/configs/zynq_cse_nand_defconfig
+++ b/configs/zynq_cse_nand_defconfig
@@ -5,7 +5,7 @@ CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x100000
 CONFIG_ENV_SIZE=0x190
-CONFIG_SYS_MALLOC_LEN=0x1000
+CONFIG_SYS_MALLOC_LEN=0x8000
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
diff --git a/drivers/clk/clk_versal.c b/drivers/clk/clk_versal.c
index d3673a5c8b..075a08380d 100644
--- a/drivers/clk/clk_versal.c
+++ b/drivers/clk/clk_versal.c
@@ -503,6 +503,9 @@ static u64 versal_clock_calc(u32 clk_id)
 	     NODE_CLASS_MASK) == NODE_SUBCLASS_CLOCK_REF)
 		return versal_clock_ref(clk_id);
 
+	if (!parent_id)
+		return 0;
+
 	clk_rate = versal_clock_calc(parent_id);
 
 	if (versal_clock_div(clk_id)) {
@@ -526,7 +529,7 @@ static int versal_clock_get_rate(u32 clk_id, u64 *clk_rate)
 	     NODE_CLASS_MASK) == NODE_SUBCLASS_CLOCK_OUT &&
 	    ((clk_id >> NODE_CLASS_SHIFT) &
 	     NODE_CLASS_MASK) == NODE_CLASS_CLOCK) {
-		if (!versal_clock_gate(clk_id))
+		if (!versal_clock_gate(clk_id) && !versal_clock_mux(clk_id))
 			return -EINVAL;
 		*clk_rate = versal_clock_calc(clk_id);
 		return 0;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 520c9f9feb..372dc0a820 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -839,8 +839,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 		cfg->host_caps &= ~MMC_MODE_HS_52MHz;
 	}
 
-	if (!(cfg->voltages & MMC_VDD_165_195) ||
-	    (host->quirks & SDHCI_QUIRK_NO_1_8_V))
+	if (!(cfg->voltages & MMC_VDD_165_195))
 		caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
 			    SDHCI_SUPPORT_DDR50);
 
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index da3ff53da1..18925d01fa 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -22,14 +22,12 @@ DECLARE_GLOBAL_DATA_PTR;
 struct arasan_sdhci_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
-	unsigned int f_max;
 };
 
 struct arasan_sdhci_priv {
 	struct sdhci_host *host;
 	u8 deviceid;
 	u8 bank;
-	u8 no_1p8;
 };
 
 #if defined(CONFIG_ARCH_ZYNQMP)
@@ -238,8 +236,11 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
 #endif
 
-	if (priv->no_1p8)
-		host->quirks |= SDHCI_QUIRK_NO_1_8_V;
+	plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ;
+
+	ret = mmc_of_parse(dev, &plat->cfg);
+	if (ret)
+		return ret;
 
 	host->max_clk = clock;
 
@@ -247,7 +248,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->mmc->dev = dev;
 	host->mmc->priv = host;
 
-	ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
+	ret = sdhci_setup_cfg(&plat->cfg, host, plat->cfg.f_max,
 			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
 	if (ret)
 		return ret;
@@ -258,7 +259,6 @@ static int arasan_sdhci_probe(struct udevice *dev)
 
 static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 {
-	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
 
 	priv->host = calloc(1, sizeof(struct sdhci_host));
@@ -277,10 +277,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 
 	priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
 	priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
-	priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
 
-	plat->f_max = dev_read_u32_default(dev, "max-frequency",
-					   CONFIG_ZYNQ_SDHCI_MAX_FREQ);
 	return 0;
 }
 
diff --git a/drivers/mtd/nand/raw/zynq_nand.c b/drivers/mtd/nand/raw/zynq_nand.c
index 0aea83dac0..3941297418 100644
--- a/drivers/mtd/nand/raw/zynq_nand.c
+++ b/drivers/mtd/nand/raw/zynq_nand.c
@@ -845,7 +845,7 @@ static void zynq_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
 	if (curr_cmd->end_cmd_valid == ZYNQ_NAND_CMD_PHASE)
 		end_cmd_valid = 1;
 
-	if (curr_cmd->end_cmd == NAND_CMD_NONE)
+	if (curr_cmd->end_cmd == (u8)NAND_CMD_NONE)
 		end_cmd = 0x0;
 	else
 		end_cmd = curr_cmd->end_cmd;
diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h
index dec5001b5f..0c259a181f 100644
--- a/include/configs/xilinx_versal.h
+++ b/include/configs/xilinx_versal.h
@@ -109,7 +109,8 @@
 #define BOOTENV_DEV_XSPI(devtypeu, devtypel, instance) \
 	"bootcmd_xspi0=sf probe 0 0 0 && " \
 	"sf read $scriptaddr $script_offset_f $script_size_f && " \
-	"source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+	"echo XSPI: Trying to boot script at ${scriptaddr} && " \
+	"source ${scriptaddr}; echo XSPI: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \
 	"xspi "
@@ -117,7 +118,8 @@
 #define BOOT_TARGET_DEVICES_JTAG(func)	func(JTAG, jtag, na)
 
 #define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
-	"bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0"
+	"bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
+		"source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
 	"jtag "
@@ -126,8 +128,10 @@
 
 #define BOOTENV_DEV_DFU_USB(devtypeu, devtypel, instance) \
 	"bootcmd_dfu_usb=setenv dfu_alt_info boot.scr ram $scriptaddr " \
-	"$script_size_f; dfu 0 ram 0 && source $scriptaddr; " \
-	"echo SCRIPT FAILED: continuing...;\0"
+	"$script_size_f; dfu 0 ram 0 && " \
+	"echo DFU: Trying to boot script at ${scriptaddr} && " \
+	"source ${scriptaddr}; " \
+	"echo DFU: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_DFU_USB(devtypeu, devtypel, instance) \
 	"dfu_usb "
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 010738363d..eddc2b4020 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -160,7 +160,8 @@
 #define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
 	"bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
 		       "sf read $scriptaddr $script_offset_f $script_size_f && " \
-		       "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+		       "echo QSPI: Trying to boot script at ${scriptaddr} && " \
+		       "source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
 	#devtypel #instance " "
@@ -168,7 +169,8 @@
 #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
 	"bootcmd_" #devtypel #instance "= nand info && " \
 		       "nand read $scriptaddr $script_offset_f $script_size_f && " \
-		       "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+		       "echo NAND: Trying to boot script at ${scriptaddr} && " \
+		       "source ${scriptaddr}; echo NAND: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
 	#devtypel #instance " "
@@ -176,7 +178,8 @@
 #define BOOT_TARGET_DEVICES_JTAG(func)	func(JTAG, jtag, na)
 
 #define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
-	"bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0"
+	"bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
+		"source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
 	"jtag "
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 1eaf65b0a2..a93172b02c 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -152,7 +152,8 @@
 #define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
 	"bootcmd_qspi=sf probe 0 0 0 && " \
 		      "sf read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \
-		      "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+		      "echo QSPI: Trying to boot script at ${scriptaddr} && " \
+		      "source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
 	"qspi "
@@ -160,7 +161,8 @@
 #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
 	"bootcmd_nand=nand info && " \
 		      "nand read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \
-		      "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+		      "echo NAND: Trying to boot script at ${scriptaddr} && " \
+		      "source ${scriptaddr}; echo NAND: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
 	"nand "
@@ -168,7 +170,8 @@
 #define BOOTENV_DEV_NOR(devtypeu, devtypel, instance) \
 	"script_offset_nor=0xE2FC0000\0"        \
 	"bootcmd_nor=cp.b ${script_offset_nor} ${scriptaddr} ${script_size_f} && " \
-		     "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+		     "echo NOR: Trying to boot script at ${scriptaddr} && " \
+		     "source ${scriptaddr}; echo NOR: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_NOR(devtypeu, devtypel, instance) \
 	"nor "
@@ -176,7 +179,8 @@
 #define BOOT_TARGET_DEVICES_JTAG(func)  func(JTAG, jtag, na)
 
 #define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
-	"bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0"
+	"bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
+		"source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
 
 #define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
 	"jtag "
@@ -198,7 +202,6 @@
 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x20000000\0"		\
-	"initrd_high=0x20000000\0"	\
 	"scriptaddr=0x20000\0"	\
 	"script_size_f=0x40000\0"	\
 	"fdt_addr_r=0x1f00000\0"        \
diff --git a/include/sdhci.h b/include/sdhci.h
index aa4378fd57..0ef8c2ed62 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -243,7 +243,6 @@
 #define SDHCI_QUIRK_BROKEN_HISPD_MODE	BIT(5)
 #define SDHCI_QUIRK_WAIT_SEND_CMD	(1 << 6)
 #define SDHCI_QUIRK_USE_WIDE8		(1 << 8)
-#define SDHCI_QUIRK_NO_1_8_V		(1 << 9)
 
 /* to make gcc happy */
 struct sdhci_host;