aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorEtienne Carriere <etienne.carriere@st.com>2018-11-30 16:31:12 +0100
committerJérôme Forissier <jerome.forissier@linaro.org>2018-12-03 13:00:56 +0100
commit12941fdcbaa31bd0c6ab241022a7eba66c801467 (patch)
tree8e0cc6d3ea462b5821ab18fb790662dd563d3050
parentee90f22ca714e2bebf7d8c063fa56d47eb61e7f3 (diff)
stm32mp1: device tree platform description
This change introduces the device tree source files describing boards EV1 and ED1 and the related bindings. The stm32mp1 DTS files and bindings header files are dumped from latest Linux kernel (v4.19). Bindings documentation is not stored in OP-TEE OS source tree, one shall refer to the bindings documentation from latest Linux kernel source tree. Note that license terms where changed for binding header file gpio.h to release them under dual 2-Clause DSB/GPLv2.0 instead of GPLv2.0 as release in the Linux kernel. Platform relies on DT source file (CFG_EMBED_DTB_SOURCE_FILE) to distinguish between the platform flavors for the few configuration directive that are static and cannot be provided only through FDT. Default configuration locates the secure DDR area (TZDRAM) from the base address of the last 32MBytes of the DDR over 30Mbyte. The last 2MBytes of the DDR are the OP-TEE static shared memory. Many contributors not listed below. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Diffstat
-rw-r--r--core/arch/arm/dts/stm32mp157-pinctrl.dtsi383
-rw-r--r--core/arch/arm/dts/stm32mp157c-ed1.dts96
-rw-r--r--core/arch/arm/dts/stm32mp157c-ev1.dts214
-rw-r--r--core/arch/arm/dts/stm32mp157c.dtsi1122
-rw-r--r--core/arch/arm/plat-stm32mp1/conf.mk12
-rw-r--r--core/include/dt-bindings/clock/stm32mp1-clks.h254
-rw-r--r--core/include/dt-bindings/gpio/gpio.h36
-rw-r--r--core/include/dt-bindings/interrupt-controller/arm-gic.h23
-rw-r--r--core/include/dt-bindings/interrupt-controller/irq.h20
-rw-r--r--core/include/dt-bindings/pinctrl/stm32-pinfunc.h36
-rw-r--r--core/include/dt-bindings/reset/stm32mp1-resets.h108
-rw-r--r--documentation/dt-bindings/README.txt9
12 files changed, 2312 insertions, 1 deletions
diff --git a/core/arch/arm/dts/stm32mp157-pinctrl.dtsi b/core/arch/arm/dts/stm32mp157-pinctrl.dtsi
new file mode 100644
index 00000000..c4851271
--- /dev/null
+++ b/core/arch/arm/dts/stm32mp157-pinctrl.dtsi
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA>;
+ st,bank-name = "GPIOA";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOB>;
+ st,bank-name = "GPIOB";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOC>;
+ st,bank-name = "GPIOC";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&rcc GPIOD>;
+ st,bank-name = "GPIOD";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&rcc GPIOE>;
+ st,bank-name = "GPIOE";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&rcc GPIOF>;
+ st,bank-name = "GPIOF";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&rcc GPIOG>;
+ st,bank-name = "GPIOG";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&rcc GPIOH>;
+ st,bank-name = "GPIOH";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&rcc GPIOI>;
+ st,bank-name = "GPIOI";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&rcc GPIOJ>;
+ st,bank-name = "GPIOJ";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&rcc GPIOK>;
+ st,bank-name = "GPIOK";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+
+ cec_pins_a: cec-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, AF4)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ ethernet0_rgmii_pins_a: rgmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+ };
+ };
+
+ i2c1_pins_a: i2c1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_a: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c5_pins_a: i2c5-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ m_can1_pins_a: m-can1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+ bias-disable;
+ };
+ };
+
+ pwm2_pins_a: pwm2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_pins_a: pwm8-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm12_pins_a: pwm12-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ qspi_clk_pins_a: qspi-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk1_pins_a: qspi-bk1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk2_pins_a: qspi-bk2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+ };
+
+ pinctrl_z: pin-controller-z@54004000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+
+ gpioz: gpio@54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&rcc GPIOZ>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+
+ i2c4_pins_a: i2c4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ spi1_pins_a: spi1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+ <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+ bias-disable;
+ };
+ };
+ };
+ };
+};
diff --git a/core/arch/arm/dts/stm32mp157c-ed1.dts b/core/arch/arm/dts/stm32mp157c-ed1.dts
new file mode 100644
index 00000000..f77bea49
--- /dev/null
+++ b/core/arch/arm/dts/stm32mp157c-ed1.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter";
+ compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ reg = <0xC0000000 0x40000000>;
+ };
+
+ aliases {
+ serial0 = &uart4;
+ };
+
+ reg11: reg11 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ reg18: reg18 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_usb: vdd-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&timers6 {
+ status = "okay";
+ timer@5 {
+ status = "okay";
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
+};
diff --git a/core/arch/arm/dts/stm32mp157c-ev1.dts b/core/arch/arm/dts/stm32mp157c-ev1.dts
new file mode 100644
index 00000000..063ee8ac
--- /dev/null
+++ b/core/arch/arm/dts/stm32mp157c-ev1.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
+ compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart4;
+ ethernet0 = &ethernet0;
+ };
+
+ panel_backlight: panel-backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+ default-on;
+ status = "okay";
+ };
+};
+
+&cec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cec_pins_a>;
+ status = "okay";
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ltdc_ep0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel-dsi@0 {
+ compatible = "raydium,rm68200";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+ backlight = <&panel_backlight>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&ethernet0 {
+ status = "okay";
+ pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+ pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
+&ltdc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
+&m_can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&m_can1_pins_a>;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: mx66l51235l@0 {
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ flash1: mx66l51235l@1 {
+ reg = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ status = "disabled";
+};
+
+&timers2 {
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm2_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ timer@1 {
+ status = "okay";
+ };
+};
+
+&timers8 {
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm8_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ timer@7 {
+ status = "okay";
+ };
+};
+
+&timers12 {
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm12_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ timer@11 {
+ status = "okay";
+ };
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "peripheral";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
diff --git a/core/arch/arm/dts/stm32mp157c.dtsi b/core/arch/arm/dts/stm32mp157c.dtsi
new file mode 100644
index 00000000..8bf1c17f
--- /dev/null
+++ b/core/arch/arm/dts/stm32mp157c.dtsi
@@ -0,0 +1,1122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timers2: timer@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc TIM2_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
+ timers3: timer@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc TIM3_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ timers4: timer@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc TIM4_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
+ timers5: timer@40003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40003000 0x400>;
+ clocks = <&rcc TIM5_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
+ timers6: timer@40004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40004000 0x400>;
+ clocks = <&rcc TIM6_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ timers7: timer@40005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40005000 0x400>;
+ clocks = <&rcc TIM7_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timer@40006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40006000 0x400>;
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@40007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40007000 0x400>;
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@40008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40008000 0x400>;
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ lptimer1: timer@40009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x40009000 0x400>;
+ clocks = <&rcc LPTIM1_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ spi2: spi@4000b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI2_K>;
+ resets = <&rcc SPI2_R>;
+ dmas = <&dmamux1 39 0x400 0x05>,
+ <&dmamux1 40 0x400 0x05>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi3: spi@4000c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x4000c000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI3_K>;
+ resets = <&rcc SPI3_R>;
+ dmas = <&dmamux1 61 0x400 0x05>,
+ <&dmamux1 62 0x400 0x05>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usart2: serial@4000e000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000e000 0x400>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ status = "disabled";
+ };
+
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ status = "disabled";
+ };
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART4_K>;
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@40012000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40012000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C1_K>;
+ resets = <&rcc I2C1_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40013000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40013000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40014000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40014000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@40015000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40015000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ cec: cec@40016000 {
+ compatible = "st,stm32-cec";
+ reg = <0x40016000 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CEC_K>, <&clk_lse>;
+ clock-names = "cec", "hdmi-cec";
+ status = "disabled";
+ };
+
+ dac: dac@40017000 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DAC12>;
+ clock-names = "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <1>;
+ status = "disabled";
+ };
+
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ status = "disabled";
+ };
+
+ timers1: timer@44000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44000000 0x400>;
+ clocks = <&rcc TIM1_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timer@44001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44001000 0x400>;
+ clocks = <&rcc TIM8_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ status = "disabled";
+ };
+
+ spi1: spi@44004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44004000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI1_K>;
+ resets = <&rcc SPI1_R>;
+ dmas = <&dmamux1 37 0x400 0x05>,
+ <&dmamux1 38 0x400 0x05>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi4: spi@44005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44005000 0x400>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI4_K>;
+ resets = <&rcc SPI4_R>;
+ dmas = <&dmamux1 83 0x400 0x05>,
+ <&dmamux1 84 0x400 0x05>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ timers15: timer@44006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44006000 0x400>;
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@44007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44007000 0x400>;
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@44008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44008000 0x400>;
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ spi5: spi@44009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44009000 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI5_K>;
+ resets = <&rcc SPI5_R>;
+ dmas = <&dmamux1 85 0x400 0x05>,
+ <&dmamux1 86 0x400 0x05>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ dfsdm: dfsdm@4400d000 {
+ compatible = "st,stm32mp1-dfsdm";
+ reg = <0x4400d000 0x800>;
+ clocks = <&rcc DFSDM_K>;
+ clock-names = "dfsdm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ dfsdm0: filter@0 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <0>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 101 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm1: filter@1 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <1>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 102 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm2: filter@2 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <2>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 103 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm3: filter@3 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <3>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 104 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm4: filter@4 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <4>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 91 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm5: filter@5 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <5>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 92 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+ };
+
+ m_can1: can@4400e000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400e000 0x400>, <0x44011000 0x2800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ status = "disabled";
+ };
+
+ m_can2: can@4400f000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ status = "disabled";
+ };
+
+ dma1: dma@48000000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48000000 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA1>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dma2: dma@48001000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48001000 0x400>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA2>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dmamux1: dma-router@48002000 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x48002000 0x1c>;
+ #dma-cells = <3>;
+ dma-requests = <128>;
+ dma-masters = <&dma1 &dma2>;
+ dma-channels = <16>;
+ clocks = <&rcc DMAMUX>;
+ };
+
+ adc: adc@48003000 {
+ compatible = "st,stm32mp1-adc-core";
+ reg = <0x48003000 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32mp1-adc";
+ #io-channel-cells = <1>;
+ reg = <0x0>;
+ interrupt-parent = <&adc>;
+ interrupts = <0>;
+ dmas = <&dmamux1 9 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ adc2: adc@100 {
+ compatible = "st,stm32mp1-adc";
+ #io-channel-cells = <1>;
+ reg = <0x100>;
+ interrupt-parent = <&adc>;
+ interrupts = <1>;
+ dmas = <&dmamux1 10 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+ };
+
+ usbotg_hs: usb-otg@49000000 {
+ compatible = "snps,dwc2";
+ reg = <0x49000000 0x10000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <256>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+ dr_mode = "otg";
+ status = "disabled";
+ };
+
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ };
+
+ syscfg: syscon@50020000 {
+ compatible = "st,stm32mp157-syscfg", "syscon";
+ reg = <0x50020000 0x400>;
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ lptimer4: timer@50023000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50023000 0x400>;
+ clocks = <&rcc LPTIM4_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ lptimer5: timer@50024000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50024000 0x400>;
+ clocks = <&rcc LPTIM5_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ vrefbuf: vrefbuf@50025000 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x50025000 0x8>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ clocks = <&rcc VREF>;
+ status = "disabled";
+ };
+
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
+ };
+
+ hash1: hash@54002000 {
+ compatible = "st,stm32f756-hash";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
+ dma-names = "in";
+ dma-maxburst = <2>;
+ status = "disabled";
+ };
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ status = "disabled";
+ };
+
+ mdma1: dma@58000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x58000000 0x1000>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc MDMA>;
+ #dma-cells = <5>;
+ dma-channels = <32>;
+ dma-requests = <48>;
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ crc1: crc@58009000 {
+ compatible = "st,stm32f7-crc";
+ reg = <0x58009000 0x400>;
+ clocks = <&rcc CRC1>;
+ status = "disabled";
+ };
+
+ stmmac_axi_config_0: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+
+ ethernet0: ethernet@5800a000 {
+ compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "syscfg-clk";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHSTP>,
+ <&rcc SYSCFG>;
+ st,syscon = <&syscfg 0x4>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_0>;
+ snps,tso;
+ status = "disabled";
+ };
+
+ usbh_ohci: usbh-ohci@5800c000 {
+ compatible = "generic-ohci";
+ reg = <0x5800c000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ usbh_ehci: usbh-ehci@5800d000 {
+ compatible = "generic-ehci";
+ reg = <0x5800d000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ companion = <&usbh_ohci>;
+ status = "disabled";
+ };
+
+ dsi: dsi@5a000000 {
+ compatible = "st,stm32-dsi";
+ reg = <0x5a000000 0x800>;
+ clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+ clock-names = "pclk", "ref", "px_clk";
+ resets = <&rcc DSI_R>;
+ reset-names = "apb";
+ status = "disabled";
+ };
+
+ ltdc: display-controller@5a001000 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x5a001000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LTDC_PX>;
+ clock-names = "lcd";
+ resets = <&rcc LTDC_R>;
+ status = "disabled";
+ };
+
+ iwdg2: watchdog@5a002000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5a002000 0x400>;
+ clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+
+ usart1: serial@5c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x5c000000 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ status = "disabled";
+ };
+
+ spi6: spi@5c001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x5c001000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI6_K>;
+ resets = <&rcc SPI6_R>;
+ dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+ <&mdma1 35 0x0 0x40002 0x0 0x0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c002000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rtc: rtc@5c004000 {
+ compatible = "st,stm32mp1-rtc";
+ reg = <0x5c004000 0x400>;
+ clocks = <&rcc RTCAPB>, <&rcc RTC>;
+ clock-names = "pclk", "rtc_ck";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@5c009000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c009000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C6_K>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/core/arch/arm/plat-stm32mp1/conf.mk b/core/arch/arm/plat-stm32mp1/conf.mk
index 5d515fd4..7a9e6c20 100644
--- a/core/arch/arm/plat-stm32mp1/conf.mk
+++ b/core/arch/arm/plat-stm32mp1/conf.mk
@@ -1,4 +1,9 @@
-PLATFORM_FLAVOR ?= stm32mp157c
+PLATFORM_FLAVOR ?= stm32mp157
+
+# 1GB and 512MB DDR target do not locate secure DDR at the same place.
+#
+flavorlist-1G = stm32mp157c-ev1.dts stm32mp157c-ed1.dts
+flavorlist-512M = stm32mp157c-dk2.dts
include core/arch/arm/cpu/cortex-a7.mk
ta-targets = ta_arm32
@@ -13,6 +18,11 @@ $(call force,CFG_SECONDARY_INIT_CNTFRQ,y)
$(call force,CFG_SECURE_TIME_SOURCE_CNTPCT,y)
$(call force,CFG_WITH_SOFTWARE_PRNG,y)
+ifneq ($(filter $(CFG_EMBED_DTB_SOURCE_FILE),$(flavorlist-512M)),)
+CFG_TZDRAM_START ?= 0xde000000
+CFG_SHMEM_START ?= 0xdfe00000
+endif
+
CFG_TZSRAM_START ?= 0x2ffc0000
CFG_TZSRAM_SIZE ?= 0x00040000
CFG_TZDRAM_START ?= 0xfe000000
diff --git a/core/include/dt-bindings/clock/stm32mp1-clks.h b/core/include/dt-bindings/clock/stm32mp1-clks.h
new file mode 100644
index 00000000..90ec780b
--- /dev/null
+++ b/core/include/dt-bindings/clock/stm32mp1-clks.h
@@ -0,0 +1,254 @@
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics.
+ */
+
+#ifndef _DT_BINDINGS_STM32MP1_CLKS_H_
+#define _DT_BINDINGS_STM32MP1_CLKS_H_
+
+/* OSCILLATOR clocks */
+#define CK_HSE 0
+#define CK_CSI 1
+#define CK_LSI 2
+#define CK_LSE 3
+#define CK_HSI 4
+#define CK_HSE_DIV2 5
+
+/* Bus clocks */
+#define TIM2 6
+#define TIM3 7
+#define TIM4 8
+#define TIM5 9
+#define TIM6 10
+#define TIM7 11
+#define TIM12 12
+#define TIM13 13
+#define TIM14 14
+#define LPTIM1 15
+#define SPI2 16
+#define SPI3 17
+#define USART2 18
+#define USART3 19
+#define UART4 20
+#define UART5 21
+#define UART7 22
+#define UART8 23
+#define I2C1 24
+#define I2C2 25
+#define I2C3 26
+#define I2C5 27
+#define SPDIF 28
+#define CEC 29
+#define DAC12 30
+#define MDIO 31
+#define TIM1 32
+#define TIM8 33
+#define TIM15 34
+#define TIM16 35
+#define TIM17 36
+#define SPI1 37
+#define SPI4 38
+#define SPI5 39
+#define USART6 40
+#define SAI1 41
+#define SAI2 42
+#define SAI3 43
+#define DFSDM 44
+#define FDCAN 45
+#define LPTIM2 46
+#define LPTIM3 47
+#define LPTIM4 48
+#define LPTIM5 49
+#define SAI4 50
+#define SYSCFG 51
+#define VREF 52
+#define TMPSENS 53
+#define PMBCTRL 54
+#define HDP 55
+#define LTDC 56
+#define DSI 57
+#define IWDG2 58
+#define USBPHY 59
+#define STGENRO 60
+#define SPI6 61
+#define I2C4 62
+#define I2C6 63
+#define USART1 64
+#define RTCAPB 65
+#define TZC1 66
+#define TZPC 67
+#define IWDG1 68
+#define BSEC 69
+#define STGEN 70
+#define DMA1 71
+#define DMA2 72
+#define DMAMUX 73
+#define ADC12 74
+#define USBO 75
+#define SDMMC3 76
+#define DCMI 77
+#define CRYP2 78
+#define HASH2 79
+#define RNG2 80
+#define CRC2 81
+#define HSEM 82
+#define IPCC 83
+#define GPIOA 84
+#define GPIOB 85
+#define GPIOC 86
+#define GPIOD 87
+#define GPIOE 88
+#define GPIOF 89
+#define GPIOG 90
+#define GPIOH 91
+#define GPIOI 92
+#define GPIOJ 93
+#define GPIOK 94
+#define GPIOZ 95
+#define CRYP1 96
+#define HASH1 97
+#define RNG1 98
+#define BKPSRAM 99
+#define MDMA 100
+#define GPU 101
+#define ETHCK 102
+#define ETHTX 103
+#define ETHRX 104
+#define ETHMAC 105
+#define FMC 106
+#define QSPI 107
+#define SDMMC1 108
+#define SDMMC2 109
+#define CRC1 110
+#define USBH 111
+#define ETHSTP 112
+#define TZC2 113
+
+/* Kernel clocks */
+#define SDMMC1_K 118
+#define SDMMC2_K 119
+#define SDMMC3_K 120
+#define FMC_K 121
+#define QSPI_K 122
+#define ETHCK_K 123
+#define RNG1_K 124
+#define RNG2_K 125
+#define GPU_K 126
+#define USBPHY_K 127
+#define STGEN_K 128
+#define SPDIF_K 129
+#define SPI1_K 130
+#define SPI2_K 131
+#define SPI3_K 132
+#define SPI4_K 133
+#define SPI5_K 134
+#define SPI6_K 135
+#define CEC_K 136
+#define I2C1_K 137
+#define I2C2_K 138
+#define I2C3_K 139
+#define I2C4_K 140
+#define I2C5_K 141
+#define I2C6_K 142
+#define LPTIM1_K 143
+#define LPTIM2_K 144
+#define LPTIM3_K 145
+#define LPTIM4_K 146
+#define LPTIM5_K 147
+#define USART1_K 148
+#define USART2_K 149
+#define USART3_K 150
+#define UART4_K 151
+#define UART5_K 152
+#define USART6_K 153
+#define UART7_K 154
+#define UART8_K 155
+#define DFSDM_K 156
+#define FDCAN_K 157
+#define SAI1_K 158
+#define SAI2_K 159
+#define SAI3_K 160
+#define SAI4_K 161
+#define ADC12_K 162
+#define DSI_K 163
+#define DSI_PX 164
+#define ADFSDM_K 165
+#define USBO_K 166
+#define LTDC_PX 167
+#define DAC12_K 168
+#define ETHPTP_K 169
+
+/* PLL */
+#define PLL1 176
+#define PLL2 177
+#define PLL3 178
+#define PLL4 179
+
+/* ODF */
+#define PLL1_P 180
+#define PLL1_Q 181
+#define PLL1_R 182
+#define PLL2_P 183
+#define PLL2_Q 184
+#define PLL2_R 185
+#define PLL3_P 186
+#define PLL3_Q 187
+#define PLL3_R 188
+#define PLL4_P 189
+#define PLL4_Q 190
+#define PLL4_R 191
+
+/* AUX */
+#define RTC 192
+
+/* MCLK */
+#define CK_PER 193
+#define CK_MPU 194
+#define CK_AXI 195
+#define CK_MCU 196
+
+/* Time base */
+#define TIM2_K 197
+#define TIM3_K 198
+#define TIM4_K 199
+#define TIM5_K 200
+#define TIM6_K 201
+#define TIM7_K 202
+#define TIM12_K 203
+#define TIM13_K 204
+#define TIM14_K 205
+#define TIM1_K 206
+#define TIM8_K 207
+#define TIM15_K 208
+#define TIM16_K 209
+#define TIM17_K 210
+
+/* MCO clocks */
+#define CK_MCO1 211
+#define CK_MCO2 212
+
+/* TRACE & DEBUG clocks */
+#define CK_DBG 214
+#define CK_TRACE 215
+
+/* DDR */
+#define DDRC1 220
+#define DDRC1LP 221
+#define DDRC2 222
+#define DDRC2LP 223
+#define DDRPHYC 224
+#define DDRPHYCLP 225
+#define DDRCAPB 226
+#define DDRCAPBLP 227
+#define AXIDCG 228
+#define DDRPHYCAPB 229
+#define DDRPHYCAPBLP 230
+#define DDRPERFM 231
+
+#define STM32MP1_LAST_CLK 232
+
+#define LTDC_K LTDC_PX
+#define ETHMAC_K ETHCK_K
+
+#endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */
diff --git a/core/include/dt-bindings/gpio/gpio.h b/core/include/dt-bindings/gpio/gpio.h
new file mode 100644
index 00000000..68727f18
--- /dev/null
+++ b/core/include/dt-bindings/gpio/gpio.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */
+/*
+ * This header provides constants for most GPIO bindings.
+ *
+ * Most GPIO bindings include a flags cell as part of the GPIO specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_GPIO_H
+#define _DT_BINDINGS_GPIO_GPIO_H
+
+/* Bit 0 express polarity */
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+/* Bit 1 express single-endedness */
+#define GPIO_PUSH_PULL 0
+#define GPIO_SINGLE_ENDED 2
+
+/* Bit 2 express Open drain or open source */
+#define GPIO_LINE_OPEN_SOURCE 0
+#define GPIO_LINE_OPEN_DRAIN 4
+
+/*
+ * Open Drain/Collector is the combination of single-ended open drain interface.
+ * Open Source/Emitter is the combination of single-ended open source interface.
+ */
+#define GPIO_OPEN_DRAIN (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_DRAIN)
+#define GPIO_OPEN_SOURCE (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_SOURCE)
+
+/* Bit 3 express GPIO suspend/resume and reset persistence */
+#define GPIO_PERSISTENT 0
+#define GPIO_TRANSITORY 8
+
+#endif
diff --git a/core/include/dt-bindings/interrupt-controller/arm-gic.h b/core/include/dt-bindings/interrupt-controller/arm-gic.h
new file mode 100644
index 00000000..35b6f69b
--- /dev/null
+++ b/core/include/dt-bindings/interrupt-controller/arm-gic.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * This header provides constants for the ARM GIC.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* interrupt specifier cell 0 */
+
+#define GIC_SPI 0
+#define GIC_PPI 1
+
+/*
+ * Interrupt specifier cell 2.
+ * The flags in irq.h are valid, plus those below.
+ */
+#define GIC_CPU_MASK_RAW(x) ((x) << 8)
+#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
+
+#endif
diff --git a/core/include/dt-bindings/interrupt-controller/irq.h b/core/include/dt-bindings/interrupt-controller/irq.h
new file mode 100644
index 00000000..9e3d183e
--- /dev/null
+++ b/core/include/dt-bindings/interrupt-controller/irq.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * This header provides constants for most IRQ bindings.
+ *
+ * Most IRQ bindings include a flags cell as part of the IRQ specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+
+#define IRQ_TYPE_NONE 0
+#define IRQ_TYPE_EDGE_RISING 1
+#define IRQ_TYPE_EDGE_FALLING 2
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 4
+#define IRQ_TYPE_LEVEL_LOW 8
+
+#endif
diff --git a/core/include/dt-bindings/pinctrl/stm32-pinfunc.h b/core/include/dt-bindings/pinctrl/stm32-pinfunc.h
new file mode 100644
index 00000000..b5a2174a
--- /dev/null
+++ b/core/include/dt-bindings/pinctrl/stm32-pinfunc.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Torgue Alexandre <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#ifndef _DT_BINDINGS_STM32_PINFUNC_H
+#define _DT_BINDINGS_STM32_PINFUNC_H
+
+/* define PIN modes */
+#define GPIO 0x0
+#define AF0 0x1
+#define AF1 0x2
+#define AF2 0x3
+#define AF3 0x4
+#define AF4 0x5
+#define AF5 0x6
+#define AF6 0x7
+#define AF7 0x8
+#define AF8 0x9
+#define AF9 0xa
+#define AF10 0xb
+#define AF11 0xc
+#define AF12 0xd
+#define AF13 0xe
+#define AF14 0xf
+#define AF15 0x10
+#define ANALOG 0x11
+
+/* define Pins number*/
+#define PIN_NO(port, line) (((port) - 'A') * 0x10 + (line))
+
+#define STM32_PINMUX(port, line, mode) (((PIN_NO(port, line)) << 8) | (mode))
+
+#endif /* _DT_BINDINGS_STM32_PINFUNC_H */
+
diff --git a/core/include/dt-bindings/reset/stm32mp1-resets.h b/core/include/dt-bindings/reset/stm32mp1-resets.h
new file mode 100644
index 00000000..f0c3aaef
--- /dev/null
+++ b/core/include/dt-bindings/reset/stm32mp1-resets.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics.
+ */
+
+#ifndef _DT_BINDINGS_STM32MP1_RESET_H_
+#define _DT_BINDINGS_STM32MP1_RESET_H_
+
+#define LTDC_R 3072
+#define DSI_R 3076
+#define DDRPERFM_R 3080
+#define USBPHY_R 3088
+#define SPI6_R 3136
+#define I2C4_R 3138
+#define I2C6_R 3139
+#define USART1_R 3140
+#define STGEN_R 3156
+#define GPIOZ_R 3200
+#define CRYP1_R 3204
+#define HASH1_R 3205
+#define RNG1_R 3206
+#define AXIM_R 3216
+#define GPU_R 3269
+#define ETHMAC_R 3274
+#define FMC_R 3276
+#define QSPI_R 3278
+#define SDMMC1_R 3280
+#define SDMMC2_R 3281
+#define CRC1_R 3284
+#define USBH_R 3288
+#define MDMA_R 3328
+#define MCU_R 8225
+#define TIM2_R 19456
+#define TIM3_R 19457
+#define TIM4_R 19458
+#define TIM5_R 19459
+#define TIM6_R 19460
+#define TIM7_R 19461
+#define TIM12_R 16462
+#define TIM13_R 16463
+#define TIM14_R 16464
+#define LPTIM1_R 19465
+#define SPI2_R 19467
+#define SPI3_R 19468
+#define USART2_R 19470
+#define USART3_R 19471
+#define UART4_R 19472
+#define UART5_R 19473
+#define UART7_R 19474
+#define UART8_R 19475
+#define I2C1_R 19477
+#define I2C2_R 19478
+#define I2C3_R 19479
+#define I2C5_R 19480
+#define SPDIF_R 19482
+#define CEC_R 19483
+#define DAC12_R 19485
+#define MDIO_R 19847
+#define TIM1_R 19520
+#define TIM8_R 19521
+#define TIM15_R 19522
+#define TIM16_R 19523
+#define TIM17_R 19524
+#define SPI1_R 19528
+#define SPI4_R 19529
+#define SPI5_R 19530
+#define USART6_R 19533
+#define SAI1_R 19536
+#define SAI2_R 19537
+#define SAI3_R 19538
+#define DFSDM_R 19540
+#define FDCAN_R 19544
+#define LPTIM2_R 19584
+#define LPTIM3_R 19585
+#define LPTIM4_R 19586
+#define LPTIM5_R 19587
+#define SAI4_R 19592
+#define SYSCFG_R 19595
+#define VREF_R 19597
+#define TMPSENS_R 19600
+#define PMBCTRL_R 19601
+#define DMA1_R 19648
+#define DMA2_R 19649
+#define DMAMUX_R 19650
+#define ADC12_R 19653
+#define USBO_R 19656
+#define SDMMC3_R 19664
+#define CAMITF_R 19712
+#define CRYP2_R 19716
+#define HASH2_R 19717
+#define RNG2_R 19718
+#define CRC2_R 19719
+#define HSEM_R 19723
+#define MBOX_R 19724
+#define GPIOA_R 19776
+#define GPIOB_R 19777
+#define GPIOC_R 19778
+#define GPIOD_R 19779
+#define GPIOE_R 19780
+#define GPIOF_R 19781
+#define GPIOG_R 19782
+#define GPIOH_R 19783
+#define GPIOI_R 19784
+#define GPIOJ_R 19785
+#define GPIOK_R 19786
+
+#endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */
diff --git a/documentation/dt-bindings/README.txt b/documentation/dt-bindings/README.txt
new file mode 100644
index 00000000..379854b2
--- /dev/null
+++ b/documentation/dt-bindings/README.txt
@@ -0,0 +1,9 @@
+This directory shall store the device tree bindings documentation.
+
+When a binding is already described in the Linux kernel source tree,
+please refer there for bindings information. Latest Linux kernel release
+is the reference for DT bindings.
+
+For the bindings not described in the the Linux kernel source tree, one can
+find here the expected description. Please use the conventional format
+for DT bindings documentation, currently plain ASCII text files.
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-18 04:48:37 +0000