summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile1
-rw-r--r--board/logicpd/zoom2/zoom2_serial.c12
-rw-r--r--common/cmd_usb.c44
-rw-r--r--common/usb.c35
-rw-r--r--common/usb_kbd.c22
-rw-r--r--common/usb_storage.c115
-rw-r--r--cpu/ppc4xx/usbdev.c4
-rw-r--r--drivers/serial/usbtty.h2
-rw-r--r--drivers/usb/host/ehci-hcd.c2
-rw-r--r--drivers/usb/musb/Makefile2
-rw-r--r--drivers/usb/musb/musb_core.c8
-rw-r--r--drivers/usb/musb/musb_core.h40
-rw-r--r--drivers/usb/musb/musb_debug.h205
-rw-r--r--drivers/usb/musb/musb_hcd.c2
-rw-r--r--drivers/usb/musb/musb_udc.c963
-rw-r--r--drivers/usb/musb/omap3.c134
-rw-r--r--drivers/usb/musb/omap3.h48
-rw-r--r--drivers/usb/phy/Makefile44
-rw-r--r--drivers/usb/phy/twl4030.c189
-rw-r--r--include/configs/omap3_beagle.h16
-rw-r--r--include/configs/omap3_evm.h39
-rw-r--r--include/configs/omap3_zoom1.h16
-rw-r--r--include/configs/omap3_zoom2.h17
-rw-r--r--include/serial.h18
-rw-r--r--include/twl4030.h143
-rw-r--r--include/usb.h73
-rw-r--r--include/usb/musb_udc.h54
-rw-r--r--include/usbdescriptors.h26
-rw-r--r--include/usbdevice.h103
29 files changed, 2245 insertions, 132 deletions
diff --git a/Makefile b/Makefile
index 28eda69106..ed6156f51f 100644
--- a/Makefile
+++ b/Makefile
@@ -241,6 +241,7 @@ LIBS += drivers/twserial/libtws.a
LIBS += drivers/usb/gadget/libusb_gadget.a
LIBS += drivers/usb/host/libusb_host.a
LIBS += drivers/usb/musb/libusb_musb.a
+LIBS += drivers/usb/phy/libusb_phy.a
LIBS += drivers/video/libvideo.a
LIBS += drivers/watchdog/libwatchdog.a
LIBS += common/libcommon.a
diff --git a/board/logicpd/zoom2/zoom2_serial.c b/board/logicpd/zoom2/zoom2_serial.c
index a3d777dfad..ba58e39346 100644
--- a/board/logicpd/zoom2/zoom2_serial.c
+++ b/board/logicpd/zoom2/zoom2_serial.c
@@ -86,6 +86,8 @@ void quad_putc_dev (unsigned long base, const char c)
quad_putc_dev (base, '\r');
NS16550_putc ((NS16550_t) base, c);
+ } else {
+ usbtty_putc(c);
}
}
@@ -94,6 +96,8 @@ void quad_puts_dev (unsigned long base, const char *s)
if (zoom2_debug_board_connected ()) {
while ((s != NULL) && (*s != '\0'))
quad_putc_dev (base, *s++);
+ } else {
+ usbtty_puts(s);
}
}
@@ -101,16 +105,16 @@ int quad_getc_dev (unsigned long base)
{
if (zoom2_debug_board_connected ())
return NS16550_getc ((NS16550_t) base);
- else
- return 0;
+
+ return usbtty_getc();
}
int quad_tstc_dev (unsigned long base)
{
if (zoom2_debug_board_connected ())
return NS16550_tstc ((NS16550_t) base);
- else
- return 0;
+
+ return usbtty_tstc();
}
void quad_setbrg_dev (unsigned long base)
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 7b8ee6b48e..9de515c323 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -157,7 +157,7 @@ void usb_display_desc(struct usb_device *dev)
{
if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) {
printf("%d: %s, USB Revision %x.%x\n", dev->devnum,
- usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass),
+ usb_get_class_desc(dev->config.if_desc[0].desc.bInterfaceClass),
(dev->descriptor.bcdUSB>>8) & 0xff,
dev->descriptor.bcdUSB & 0xff);
@@ -174,7 +174,7 @@ void usb_display_desc(struct usb_device *dev)
} else {
printf(" - Class: (from Interface) %s\n",
usb_get_class_desc(
- dev->config.if_desc[0].bInterfaceClass));
+ dev->config.if_desc[0].desc.bInterfaceClass));
}
printf(" - PacketSize: %d Configurations: %d\n",
dev->descriptor.bMaxPacketSize0,
@@ -187,14 +187,14 @@ void usb_display_desc(struct usb_device *dev)
}
-void usb_display_conf_desc(struct usb_config_descriptor *config,
+void usb_display_conf_desc(struct usb_configuration_descriptor *config,
struct usb_device *dev)
{
printf(" Configuration: %d\n", config->bConfigurationValue);
printf(" - Interfaces: %d %s%s%dmA\n", config->bNumInterfaces,
(config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ",
(config->bmAttributes & 0x20) ? "Remote Wakeup " : "",
- config->MaxPower*2);
+ config->bMaxPower*2);
if (config->iConfiguration) {
printf(" - ");
usb_display_string(dev, config->iConfiguration);
@@ -246,16 +246,16 @@ void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
/* main routine to diasplay the configs, interfaces and endpoints */
void usb_display_config(struct usb_device *dev)
{
- struct usb_config_descriptor *config;
- struct usb_interface_descriptor *ifdesc;
+ struct usb_config *config;
+ struct usb_interface *ifdesc;
struct usb_endpoint_descriptor *epdesc;
int i, ii;
config = &dev->config;
- usb_display_conf_desc(config, dev);
+ usb_display_conf_desc(&config->desc, dev);
for (i = 0; i < config->no_of_if; i++) {
ifdesc = &config->if_desc[i];
- usb_display_if_desc(ifdesc, dev);
+ usb_display_if_desc(&ifdesc->desc, dev);
for (ii = 0; ii < ifdesc->no_of_ep; ii++) {
epdesc = &ifdesc->ep_desc[ii];
usb_display_ep_desc(epdesc);
@@ -319,9 +319,9 @@ void usb_show_tree_graph(struct usb_device *dev, char *pre)
pre[index++] = has_child ? '|' : ' ';
pre[index] = 0;
printf(" %s (%s, %dmA)\n", usb_get_class_desc(
- dev->config.if_desc[0].bInterfaceClass),
+ dev->config.if_desc[0].desc.bInterfaceClass),
portspeed(dev->speed),
- dev->config.MaxPower * 2);
+ dev->config.desc.bMaxPower * 2);
if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial))
printf(" %s %s %s %s\n", pre, dev->mf, dev->prod, dev->serial);
printf(" %s\n", pre);
@@ -642,6 +642,28 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 1;
}
}
+ if (strcmp(argv[1], "write") == 0) {
+ if (usb_stor_curr_dev < 0) {
+ printf("no current device selected\n");
+ return 1;
+ }
+ if (argc == 5) {
+ unsigned long addr = simple_strtoul(argv[2], NULL, 16);
+ unsigned long blk = simple_strtoul(argv[3], NULL, 16);
+ unsigned long cnt = simple_strtoul(argv[4], NULL, 16);
+ unsigned long n;
+ printf("\nUSB write: device %d block # %ld, count %ld"
+ " ... ", usb_stor_curr_dev, blk, cnt);
+ stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
+ n = stor_dev->block_write(usb_stor_curr_dev, blk, cnt,
+ (ulong *)addr);
+ printf("%ld blocks write: %s\n", n,
+ (n == cnt) ? "OK" : "ERROR");
+ if (n == cnt)
+ return 0;
+ return 1;
+ }
+ }
if (strncmp(argv[1], "dev", 3) == 0) {
if (argc == 3) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
@@ -687,6 +709,8 @@ U_BOOT_CMD(
" devices\n"
"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
" to memory address `addr'"
+ "usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'\n"
+ " from memory address `addr'"
);
diff --git a/common/usb.c b/common/usb.c
index 87fca70706..eef4b34a74 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -299,8 +299,8 @@ int usb_set_maxpacket(struct usb_device *dev)
{
int i, ii;
- for (i = 0; i < dev->config.bNumInterfaces; i++)
- for (ii = 0; ii < dev->config.if_desc[i].bNumEndpoints; ii++)
+ for (i = 0; i < dev->config.desc.bNumInterfaces; i++)
+ for (ii = 0; ii < dev->config.if_desc[i].desc.bNumEndpoints; ii++)
usb_set_maxpacket_ep(dev,
&dev->config.if_desc[i].ep_desc[ii]);
@@ -330,14 +330,14 @@ int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
return -1;
}
memcpy(&dev->config, buffer, buffer[0]);
- le16_to_cpus(&(dev->config.wTotalLength));
+ le16_to_cpus(&(dev->config.desc.wTotalLength));
dev->config.no_of_if = 0;
- index = dev->config.bLength;
+ index = dev->config.desc.bLength;
/* Ok the first entry must be a configuration entry,
* now process the others */
head = (struct usb_descriptor_header *) &buffer[index];
- while (index + 1 < dev->config.wTotalLength) {
+ while (index + 1 < dev->config.desc.wTotalLength) {
switch (head->bDescriptorType) {
case USB_DT_INTERFACE:
if (((struct usb_interface_descriptor *) \
@@ -350,7 +350,7 @@ int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
dev->config.if_desc[ifno].no_of_ep = 0;
dev->config.if_desc[ifno].num_altsetting = 1;
curr_if_num =
- dev->config.if_desc[ifno].bInterfaceNumber;
+ dev->config.if_desc[ifno].desc.bInterfaceNumber;
} else {
/* found alternate setting for the interface */
dev->config.if_desc[ifno].num_altsetting++;
@@ -440,10 +440,9 @@ int usb_get_configuration_no(struct usb_device *dev,
{
int result;
unsigned int tmp;
- struct usb_config_descriptor *config;
+ struct usb_configuration_descriptor *config;
-
- config = (struct usb_config_descriptor *)&buffer[0];
+ config = (struct usb_configuration_descriptor *)&buffer[0];
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 9);
if (result < 9) {
if (result < 0)
@@ -489,11 +488,11 @@ int usb_set_address(struct usb_device *dev)
*/
int usb_set_interface(struct usb_device *dev, int interface, int alternate)
{
- struct usb_interface_descriptor *if_face = NULL;
+ struct usb_interface *if_face = NULL;
int ret, i;
- for (i = 0; i < dev->config.bNumInterfaces; i++) {
- if (dev->config.if_desc[i].bInterfaceNumber == interface) {
+ for (i = 0; i < dev->config.desc.bNumInterfaces; i++) {
+ if (dev->config.if_desc[i].desc.bInterfaceNumber == interface) {
if_face = &dev->config.if_desc[i];
break;
}
@@ -897,7 +896,7 @@ int usb_new_device(struct usb_device *dev)
usb_parse_config(dev, &tmpbuf[0], 0);
usb_set_maxpacket(dev);
/* we set the default configuration here */
- if (usb_set_configuration(dev, dev->config.bConfigurationValue)) {
+ if (usb_set_configuration(dev, dev->config.desc.bConfigurationValue)) {
printf("failed to set default configuration " \
"len %d, status %lX\n", dev->act_len, dev->status);
return -1;
@@ -1347,21 +1346,21 @@ int usb_hub_configure(struct usb_device *dev)
int usb_hub_probe(struct usb_device *dev, int ifnum)
{
- struct usb_interface_descriptor *iface;
+ struct usb_interface *iface;
struct usb_endpoint_descriptor *ep;
int ret;
iface = &dev->config.if_desc[ifnum];
/* Is it a hub? */
- if (iface->bInterfaceClass != USB_CLASS_HUB)
+ if (iface->desc.bInterfaceClass != USB_CLASS_HUB)
return 0;
/* Some hubs have a subclass of 1, which AFAICT according to the */
/* specs is not defined, but it works */
- if ((iface->bInterfaceSubClass != 0) &&
- (iface->bInterfaceSubClass != 1))
+ if ((iface->desc.bInterfaceSubClass != 0) &&
+ (iface->desc.bInterfaceSubClass != 1))
return 0;
/* Multiple endpoints? What kind of mutant ninja-hub is this? */
- if (iface->bNumEndpoints != 1)
+ if (iface->desc.bNumEndpoints != 1)
return 0;
ep = &iface->ep_desc[0];
/* Output endpoint? Curiousier and curiousier.. */
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index b458d77283..9957dcc323 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -229,7 +229,7 @@ int usb_kbd_deregister(void)
static void usb_kbd_setled(struct usb_device *dev)
{
- struct usb_interface_descriptor *iface;
+ struct usb_interface *iface;
iface = &dev->config.if_desc[0];
leds=0;
if(scroll_lock!=0)
@@ -242,7 +242,7 @@ static void usb_kbd_setled(struct usb_device *dev)
leds|=1;
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0x200, iface->bInterfaceNumber,(void *)&leds, 1, 0);
+ 0x200, iface->desc.bInterfaceNumber, (void *)&leds, 1, 0);
}
@@ -348,17 +348,21 @@ static int usb_kbd_irq(struct usb_device *dev)
/* probes the USB device dev for keyboard type */
static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum)
{
- struct usb_interface_descriptor *iface;
+ struct usb_interface *iface;
struct usb_endpoint_descriptor *ep;
int pipe,maxp;
if (dev->descriptor.bNumConfigurations != 1) return 0;
iface = &dev->config.if_desc[ifnum];
- if (iface->bInterfaceClass != 3) return 0;
- if (iface->bInterfaceSubClass != 1) return 0;
- if (iface->bInterfaceProtocol != 1) return 0;
- if (iface->bNumEndpoints != 1) return 0;
+ if (iface->desc.bInterfaceClass != 3)
+ return 0;
+ if (iface->desc.bInterfaceSubClass != 1)
+ return 0;
+ if (iface->desc.bInterfaceProtocol != 1)
+ return 0;
+ if (iface->desc.bNumEndpoints != 1)
+ return 0;
ep = &iface->ep_desc[0];
@@ -367,9 +371,9 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum)
USB_KBD_PRINTF("USB KBD found set protocol...\n");
/* ok, we found a USB Keyboard, install it */
/* usb_kbd_get_hid_desc(dev); */
- usb_set_protocol(dev, iface->bInterfaceNumber, 0);
+ usb_set_protocol(dev, iface->desc.bInterfaceNumber, 0);
USB_KBD_PRINTF("USB KBD found set idle...\n");
- usb_set_idle(dev, iface->bInterfaceNumber, REPEAT_RATE, 0);
+ usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0);
memset(&new[0], 0, 8);
memset(&old[0], 0, 8);
repeat_delay=0;
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 19613f28c8..a8642c9cc5 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -168,6 +168,8 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
struct us_data *ss);
unsigned long usb_stor_read(int device, unsigned long blknr,
unsigned long blkcnt, void *buffer);
+unsigned long usb_stor_write(int device, unsigned long blknr,
+ unsigned long blkcnt, const void *buffer);
struct usb_device * usb_get_dev_index(int index);
void uhci_show_temp_int_td(void);
@@ -227,6 +229,7 @@ int usb_stor_scan(int mode)
usb_dev_desc[i].dev = i;
usb_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
usb_dev_desc[i].block_read = usb_stor_read;
+ usb_dev_desc[i].block_write = usb_stor_write;
}
usb_max_devs = 0;
@@ -964,6 +967,22 @@ static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start,
return ss->transport(srb, ss);
}
+static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start,
+ unsigned short blocks)
+{
+ memset(&srb->cmd[0], 0, 12);
+ srb->cmd[0] = SCSI_WRITE10;
+ srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
+ srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
+ srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
+ srb->cmd[5] = ((unsigned char) (start)) & 0xff;
+ srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
+ srb->cmd[8] = (unsigned char) blocks & 0xff;
+ srb->cmdlen = 12;
+ USB_STOR_PRINTF("write10: start %lx blocks %x\n", start, blocks);
+ return ss->transport(srb, ss);
+}
+
#ifdef CONFIG_USB_BIN_FIXUP
/*
@@ -1065,12 +1084,92 @@ retry_it:
return blkcnt;
}
+#define USB_MAX_WRITE_BLK 20
+
+unsigned long usb_stor_write(int device, unsigned long blknr,
+ unsigned long blkcnt, const void *buffer)
+{
+ unsigned long start, blks, buf_addr;
+ unsigned short smallblks;
+ struct usb_device *dev;
+ int retry, i;
+ ccb *srb = &usb_ccb;
+
+ if (blkcnt == 0)
+ return 0;
+
+ device &= 0xff;
+ /* Setup device */
+ USB_STOR_PRINTF("\nusb_write: dev %d \n", device);
+ dev = NULL;
+ for (i = 0; i < USB_MAX_DEVICE; i++) {
+ dev = usb_get_dev_index(i);
+ if (dev == NULL)
+ return 0;
+ if (dev->devnum == usb_dev_desc[device].target)
+ break;
+ }
+
+ usb_disable_asynch(1); /* asynch transfer not allowed */
+
+ srb->lun = usb_dev_desc[device].lun;
+ buf_addr = (unsigned long)buffer;
+ start = blknr;
+ blks = blkcnt;
+ if (usb_test_unit_ready(srb, (struct us_data *)dev->privptr)) {
+ printf("Device NOT ready\n Request Sense returned %02X %02X"
+ " %02X\n", srb->sense_buf[2], srb->sense_buf[12],
+ srb->sense_buf[13]);
+ return 0;
+ }
+
+ USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx"
+ " buffer %lx\n", device, start, blks, buf_addr);
+
+ do {
+ /* If write fails retry for max retry count else
+ * return with number of blocks written successfully.
+ */
+ retry = 2;
+ srb->pdata = (unsigned char *)buf_addr;
+ if (blks > USB_MAX_WRITE_BLK)
+ smallblks = USB_MAX_WRITE_BLK;
+ else
+ smallblks = (unsigned short) blks;
+retry_it:
+ if (smallblks == USB_MAX_WRITE_BLK)
+ usb_show_progress();
+ srb->datalen = usb_dev_desc[device].blksz * smallblks;
+ srb->pdata = (unsigned char *)buf_addr;
+ if (usb_write_10(srb, (struct us_data *)dev->privptr, start,
+ smallblks)) {
+ USB_STOR_PRINTF("Write ERROR\n");
+ usb_request_sense(srb, (struct us_data *)dev->privptr);
+ if (retry--)
+ goto retry_it;
+ blkcnt -= blks;
+ break;
+ }
+ start += smallblks;
+ blks -= smallblks;
+ buf_addr += srb->datalen;
+ } while (blks != 0);
+
+ USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
+ start, smallblks, buf_addr);
+
+ usb_disable_asynch(0); /* asynch transfer allowed */
+ if (blkcnt >= USB_MAX_WRITE_BLK)
+ printf("\n");
+ return blkcnt;
+
+}
/* Probe to see if a new device is actually a Storage device */
int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
struct us_data *ss)
{
- struct usb_interface_descriptor *iface;
+ struct usb_interface *iface;
int i;
unsigned int flags = 0;
@@ -1094,9 +1193,9 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
#endif
if (dev->descriptor.bDeviceClass != 0 ||
- iface->bInterfaceClass != USB_CLASS_MASS_STORAGE ||
- iface->bInterfaceSubClass < US_SC_MIN ||
- iface->bInterfaceSubClass > US_SC_MAX) {
+ iface->desc.bInterfaceClass != USB_CLASS_MASS_STORAGE ||
+ iface->desc.bInterfaceSubClass < US_SC_MIN ||
+ iface->desc.bInterfaceSubClass > US_SC_MAX) {
/* if it's not a mass storage, we go no further */
return 0;
}
@@ -1119,8 +1218,8 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
ss->subclass = subclass;
ss->protocol = protocol;
} else {
- ss->subclass = iface->bInterfaceSubClass;
- ss->protocol = iface->bInterfaceProtocol;
+ ss->subclass = iface->desc.bInterfaceSubClass;
+ ss->protocol = iface->desc.bInterfaceProtocol;
}
/* set the handler pointers based on the protocol */
@@ -1153,7 +1252,7 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
* An optional interrupt is OK (necessary for CBI protocol).
* We will ignore any others.
*/
- for (i = 0; i < iface->bNumEndpoints; i++) {
+ for (i = 0; i < iface->desc.bNumEndpoints; i++) {
/* is it an BULK endpoint? */
if ((iface->ep_desc[i].bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
@@ -1178,7 +1277,7 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
ss->ep_in, ss->ep_out, ss->ep_int);
/* Do some basic sanity checks, and bail if we find a problem */
- if (usb_set_interface(dev, iface->bInterfaceNumber, 0) ||
+ if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) ||
!ss->ep_in || !ss->ep_out ||
(ss->protocol == US_PR_CBI && ss->ep_int == 0)) {
USB_STOR_PRINTF("Problems with device\n");
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 5bb4f3ce63..fe398afc02 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -21,7 +21,7 @@ void process_endpoints(unsigned short usb2d0_intrin)
{
/*will hold the packet received */
struct usb_device_descriptor usb_device_packet;
- struct usb_config_descriptor usb_config_packet;
+ struct usb_configuration_descriptor usb_config_packet;
struct usb_string_descriptor usb_string_packet;
struct devrequest setup_packet;
unsigned int *setup_packet_pt;
@@ -99,7 +99,7 @@ void process_endpoints(unsigned short usb2d0_intrin)
usb_config_packet.bConfigurationValue = 1;
usb_config_packet.iConfiguration = 0;
usb_config_packet.bmAttributes = 0x40;
- usb_config_packet.MaxPower = 0;
+ usb_config_packet.bMaxPower = 0;
/*put packet in fifo */
packet_pt = (unsigned char *)&usb_config_packet;
diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h
index f746d6317f..6b6c4a1628 100644
--- a/drivers/serial/usbtty.h
+++ b/drivers/serial/usbtty.h
@@ -29,6 +29,8 @@
#include <usb/mpc8xx_udc.h>
#elif defined(CONFIG_OMAP1510)
#include <usb/omap1510_udc.h>
+#elif defined(CONFIG_MUSB_UDC)
+#include <usb/musb_udc.h>
#elif defined(CONFIG_PXA27X)
#include <usb/pxa27x_udc.h>
#endif
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 324c308f47..ba85991e86 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -96,7 +96,7 @@ static struct descriptor {
* UE_DIR_IN | EHCI_INTR_ENDPT
*/
3, /* bmAttributes: UE_INTERRUPT */
- 8, 0, /* wMaxPacketSize */
+ 8, /* wMaxPacketSize */
255 /* bInterval */
},
};
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 09e0a5f32f..f2ccd9fe06 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -26,7 +26,9 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libusb_musb.a
COBJS-$(CONFIG_MUSB_HCD) += musb_hcd.o musb_core.o
+COBJS-$(CONFIG_MUSB_UDC) += musb_udc.o musb_core.o
COBJS-$(CONFIG_USB_DAVINCI) += davinci.o
+COBJS-$(CONFIG_USB_OMAP3) += omap3.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ec57fc811c..22f3dba0cf 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -32,7 +32,9 @@ struct musb_regs *musbr;
*/
void musb_start(void)
{
+#if defined(CONFIG_MUSB_HCD)
u8 devctl;
+#endif
/* disable all interrupts */
writew(0, &musbr->intrtxe);
@@ -74,9 +76,10 @@ void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt)
/* Configure fifo size and fifo base address */
writeb(idx, &musbr->txfifosz);
writew(fifoaddr >> 3, &musbr->txfifoadd);
+
+ csr = readw(&musbr->txcsr);
#if defined(CONFIG_MUSB_HCD)
/* clear the data toggle bit */
- csr = readw(&musbr->txcsr);
writew(csr | MUSB_TXCSR_CLRDATATOG, &musbr->txcsr);
#endif
/* Flush fifo if required */
@@ -87,9 +90,10 @@ void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt)
/* Configure fifo size and fifo base address */
writeb(idx, &musbr->rxfifosz);
writew(fifoaddr >> 3, &musbr->rxfifoadd);
+
+ csr = readw(&musbr->rxcsr);
#if defined(CONFIG_MUSB_HCD)
/* clear the data toggle bit */
- csr = readw(&musbr->rxcsr);
writew(csr | MUSB_RXCSR_CLRDATATOG, &musbr->rxcsr);
#endif
/* Flush fifo if required */
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f9da3f0b29..15c7f49a35 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -40,6 +40,36 @@
#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
+/* EP0 */
+struct musb_ep0_regs {
+ u16 reserved4;
+ u16 csr0;
+ u16 reserved5;
+ u16 reserved6;
+ u16 count0;
+ u8 host_type0;
+ u8 host_naklimit0;
+ u8 reserved7;
+ u8 reserved8;
+ u8 reserved9;
+ u8 configdata;
+};
+
+/* EP 1-15 */
+struct musb_epN_regs {
+ u16 txmaxp;
+ u16 txcsr;
+ u16 rxmaxp;
+ u16 rxcsr;
+ u16 rxcount;
+ u8 txtype;
+ u8 txinterval;
+ u8 rxtype;
+ u8 rxinterval;
+ u8 reserved0;
+ u8 fifosize;
+};
+
/* Mentor USB core register overlay structure */
struct musb_regs {
/* common registers */
@@ -97,6 +127,16 @@ struct musb_regs {
u8 rxhubaddr;
u8 rxhubport;
} tar[16];
+ /*
+ * end point registers
+ * ep0 elements are valid when array index is 0
+ * otherwise epN is valid
+ */
+ union musb_ep_regs {
+ struct musb_ep0_regs ep0;
+ struct musb_epN_regs epN;
+ } ep[16];
+
} __attribute__((aligned(32)));
/*
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
new file mode 100644
index 0000000000..62380ffc65
--- /dev/null
+++ b/drivers/usb/musb/musb_debug.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Define MUSB_DEBUG before including this file to get debug macros */
+#ifdef MUSB_DEBUG
+
+#define MUSB_FLAGS_PRINT(v, x, y) \
+ if (((v) & MUSB_##x##_##y)) \
+ serial_printf("\t\t"#y"\n")
+
+static inline void musb_print_pwr(u8 b)
+{
+ serial_printf("\tpower 0x%2.2x\n", b);
+ MUSB_FLAGS_PRINT(b, POWER, ISOUPDATE);
+ MUSB_FLAGS_PRINT(b, POWER, SOFTCONN);
+ MUSB_FLAGS_PRINT(b, POWER, HSENAB);
+ MUSB_FLAGS_PRINT(b, POWER, HSMODE);
+ MUSB_FLAGS_PRINT(b, POWER, RESET);
+ MUSB_FLAGS_PRINT(b, POWER, RESUME);
+ MUSB_FLAGS_PRINT(b, POWER, SUSPENDM);
+ MUSB_FLAGS_PRINT(b, POWER, ENSUSPEND);
+}
+
+static inline void musb_print_csr0(u16 w)
+{
+ serial_printf("\tcsr0 0x%4.4x\n", w);
+ MUSB_FLAGS_PRINT(w, CSR0, FLUSHFIFO);
+ MUSB_FLAGS_PRINT(w, CSR0_P, SVDSETUPEND);
+ MUSB_FLAGS_PRINT(w, CSR0_P, SVDRXPKTRDY);
+ MUSB_FLAGS_PRINT(w, CSR0_P, SENDSTALL);
+ MUSB_FLAGS_PRINT(w, CSR0_P, SETUPEND);
+ MUSB_FLAGS_PRINT(w, CSR0_P, DATAEND);
+ MUSB_FLAGS_PRINT(w, CSR0_P, SENTSTALL);
+ MUSB_FLAGS_PRINT(w, CSR0, TXPKTRDY);
+ MUSB_FLAGS_PRINT(w, CSR0, RXPKTRDY);
+}
+
+static inline void musb_print_intrusb(u8 b)
+{
+ serial_printf("\tintrusb 0x%2.2x\n", b);
+ MUSB_FLAGS_PRINT(b, INTR, VBUSERROR);
+ MUSB_FLAGS_PRINT(b, INTR, SESSREQ);
+ MUSB_FLAGS_PRINT(b, INTR, DISCONNECT);
+ MUSB_FLAGS_PRINT(b, INTR, CONNECT);
+ MUSB_FLAGS_PRINT(b, INTR, SOF);
+ MUSB_FLAGS_PRINT(b, INTR, RESUME);
+ MUSB_FLAGS_PRINT(b, INTR, SUSPEND);
+
+ if (b & MUSB_INTR_BABBLE)
+ serial_printf("\t\tMUSB_INTR_RESET or MUSB_INTR_BABBLE\n");
+
+}
+
+static inline void musb_print_intrtx(u16 w)
+{
+ serial_printf("\tintrtx 0x%4.4x\n", w);
+}
+
+static inline void musb_print_intrrx(u16 w)
+{
+ serial_printf("\tintrx 0x%4.4x\n", w);
+}
+
+static inline void musb_print_devctl(u8 b)
+{
+ serial_printf("\tdevctl 0x%2.2x\n", b);
+ if (b & MUSB_DEVCTL_BDEVICE)
+ serial_printf("\t\tB device\n");
+ else
+ serial_printf("\t\tA device\n");
+ if (b & MUSB_DEVCTL_FSDEV)
+ serial_printf("\t\tFast Device -(host mode)\n");
+ if (b & MUSB_DEVCTL_LSDEV)
+ serial_printf("\t\tSlow Device -(host mode)\n");
+ if (b & MUSB_DEVCTL_HM)
+ serial_printf("\t\tHost mode\n");
+ else
+ serial_printf("\t\tPeripherial mode\n");
+ if (b & MUSB_DEVCTL_HR)
+ serial_printf("\t\tHost request started(B device)\n");
+ else
+ serial_printf("\t\tHost request finished(B device)\n");
+ if (b & MUSB_DEVCTL_BDEVICE) {
+ if (b & MUSB_DEVCTL_SESSION)
+ serial_printf("\t\tStart of session(B device)\n");
+ else
+ serial_printf("\t\tEnd of session(B device)\n");
+ } else {
+ if (b & MUSB_DEVCTL_SESSION)
+ serial_printf("\t\tStart of session(A device)\n");
+ else
+ serial_printf("\t\tEnd of session(A device)\n");
+ }
+}
+
+static inline void musb_print_config(u8 b)
+{
+ serial_printf("\tconfig 0x%2.2x\n", b);
+ if (b & MUSB_CONFIGDATA_MPRXE)
+ serial_printf("\t\tAuto combine rx bulk packets\n");
+ if (b & MUSB_CONFIGDATA_MPTXE)
+ serial_printf("\t\tAuto split tx bulk packets\n");
+ if (b & MUSB_CONFIGDATA_BIGENDIAN)
+ serial_printf("\t\tBig Endian ordering\n");
+ else
+ serial_printf("\t\tLittle Endian ordering\n");
+ if (b & MUSB_CONFIGDATA_HBRXE)
+ serial_printf("\t\tHigh speed rx iso endpoint\n");
+ if (b & MUSB_CONFIGDATA_HBTXE)
+ serial_printf("\t\tHigh speed tx iso endpoint\n");
+ if (b & MUSB_CONFIGDATA_DYNFIFO)
+ serial_printf("\t\tDynamic fifo sizing\n");
+ if (b & MUSB_CONFIGDATA_SOFTCONE)
+ serial_printf("\t\tSoft Connect\n");
+ if (b & MUSB_CONFIGDATA_UTMIDW)
+ serial_printf("\t\t16 bit data width\n");
+ else
+ serial_printf("\t\t8 bit data width\n");
+}
+
+static inline void musb_print_rxmaxp(u16 w)
+{
+ serial_printf("\trxmaxp 0x%4.4x\n", w);
+}
+
+static inline void musb_print_rxcsr(u16 w)
+{
+ serial_printf("\trxcsr 0x%4.4x\n", w);
+ MUSB_FLAGS_PRINT(w, RXCSR, AUTOCLEAR);
+ MUSB_FLAGS_PRINT(w, RXCSR, DMAENAB);
+ MUSB_FLAGS_PRINT(w, RXCSR, DISNYET);
+ MUSB_FLAGS_PRINT(w, RXCSR, PID_ERR);
+ MUSB_FLAGS_PRINT(w, RXCSR, DMAMODE);
+ MUSB_FLAGS_PRINT(w, RXCSR, CLRDATATOG);
+ MUSB_FLAGS_PRINT(w, RXCSR, FLUSHFIFO);
+ MUSB_FLAGS_PRINT(w, RXCSR, DATAERROR);
+ MUSB_FLAGS_PRINT(w, RXCSR, FIFOFULL);
+ MUSB_FLAGS_PRINT(w, RXCSR, RXPKTRDY);
+ MUSB_FLAGS_PRINT(w, RXCSR_P, SENTSTALL);
+ MUSB_FLAGS_PRINT(w, RXCSR_P, SENDSTALL);
+ MUSB_FLAGS_PRINT(w, RXCSR_P, OVERRUN);
+
+ if (w & MUSB_RXCSR_P_ISO)
+ serial_printf("\t\tiso mode\n");
+ else
+ serial_printf("\t\tbulk mode\n");
+
+}
+
+static inline void musb_print_txmaxp(u16 w)
+{
+ serial_printf("\ttxmaxp 0x%4.4x\n", w);
+}
+
+static inline void musb_print_txcsr(u16 w)
+{
+ serial_printf("\ttxcsr 0x%4.4x\n", w);
+ MUSB_FLAGS_PRINT(w, TXCSR, TXPKTRDY);
+ MUSB_FLAGS_PRINT(w, TXCSR, FIFONOTEMPTY);
+ MUSB_FLAGS_PRINT(w, TXCSR, FLUSHFIFO);
+ MUSB_FLAGS_PRINT(w, TXCSR, CLRDATATOG);
+ MUSB_FLAGS_PRINT(w, TXCSR_P, UNDERRUN);
+ MUSB_FLAGS_PRINT(w, TXCSR_P, SENTSTALL);
+ MUSB_FLAGS_PRINT(w, TXCSR_P, SENDSTALL);
+
+ if (w & MUSB_TXCSR_MODE)
+ serial_printf("\t\tTX mode\n");
+ else
+ serial_printf("\t\tRX mode\n");
+}
+
+#else
+
+/* stubs */
+
+#define musb_print_pwr(b)
+#define musb_print_csr0(w)
+#define musb_print_intrusb(b)
+#define musb_print_intrtx(w)
+#define musb_print_intrrx(w)
+#define musb_print_devctl(b)
+#define musb_print_config(b)
+#define musb_print_rxmaxp(w)
+#define musb_print_rxcsr(w)
+#define musb_print_txmaxp(w)
+#define musb_print_txcsr(w)
+
+#endif /* MUSB_DEBUG */
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 4ca94cb317..555d2dc1b0 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -803,7 +803,7 @@ void usb_event_poll()
{
struct stdio_dev *dev;
struct usb_device *usb_kbd_dev;
- struct usb_interface_descriptor *iface;
+ struct usb_interface *iface;
struct usb_endpoint_descriptor *ep;
int pipe;
int maxp;
diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c
new file mode 100644
index 0000000000..fc43cf4f09
--- /dev/null
+++ b/drivers/usb/musb/musb_udc.c
@@ -0,0 +1,963 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This file is a rewrite of the usb device part of
+ * repository git.omapzoom.org/repo/u-boot.git, branch master,
+ * file cpu/omap3/fastboot.c
+ *
+ * This is the unique part of its copyright :
+ *
+ * -------------------------------------------------------------------------
+ *
+ * (C) Copyright 2008 - 2009
+ * Windriver, <www.windriver.com>
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * -------------------------------------------------------------------------
+ *
+ * The details of connecting the device to the uboot usb device subsystem
+ * came from the old omap3 repository www.sakoman.net/u-boot-omap3.git,
+ * branch omap3-dev-usb, file drivers/usb/usbdcore_musb.c
+ *
+ * This is the unique part of its copyright :
+ *
+ * -------------------------------------------------------------------------
+ *
+ * (C) Copyright 2008 Texas Instruments Incorporated.
+ *
+ * Based on
+ * u-boot OMAP1510 USB drivers (drivers/usbdcore_omap1510.c)
+ * twl4030 init based on linux (drivers/i2c/chips/twl4030_usb.c)
+ *
+ * Author: Diego Dompe (diego.dompe@ridgerun.com)
+ * Atin Malaviya (atin.malaviya@gmail.com)
+ *
+ * -------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <usb/musb_udc.h>
+#include "../gadget/ep0.h"
+#include "musb_core.h"
+#if defined(CONFIG_USB_OMAP3)
+#include "omap3.h"
+#elif defined(CONFIG_USB_DAVINCI)
+#include "davinci.h"
+#endif
+
+/* Define MUSB_DEBUG for debugging */
+/* #define MUSB_DEBUG */
+#include "musb_debug.h"
+
+#define MAX_ENDPOINT 15
+
+#define GET_ENDPOINT(dev,ep) \
+(((struct usb_device_instance *)(dev))->bus->endpoint_array + ep)
+
+#define SET_EP0_STATE(s) \
+do { \
+ if ((0 <= (s)) && (SET_ADDRESS >= (s))) { \
+ if ((s) != ep0_state) { \
+ if ((debug_setup) && (debug_level > 1)) \
+ serial_printf("INFO : Changing state " \
+ "from %s to %s in %s at " \
+ "line %d\n", \
+ ep0_state_strings[ep0_state],\
+ ep0_state_strings[s], \
+ __PRETTY_FUNCTION__, \
+ __LINE__); \
+ ep0_state = s; \
+ } \
+ } else { \
+ if (debug_level > 0) \
+ serial_printf("Error at %s %d with setting " \
+ "state %d is invalid\n", \
+ __PRETTY_FUNCTION__, __LINE__, s); \
+ } \
+} while (0)
+
+/* static implies these initialized to 0 or NULL */
+static int debug_setup;
+static int debug_level;
+static struct musb_epinfo epinfo[MAX_ENDPOINT * 2];
+static enum ep0_state_enum {
+ IDLE = 0,
+ TX,
+ RX,
+ SET_ADDRESS
+} ep0_state = IDLE;
+static char *ep0_state_strings[4] = {
+ "IDLE",
+ "TX",
+ "RX",
+ "SET_ADDRESS",
+};
+
+static struct urb *ep0_urb;
+struct usb_endpoint_instance *ep0_endpoint;
+static struct usb_device_instance *udc_device;
+static int enabled;
+
+#ifdef MUSB_DEBUG
+static void musb_db_regs(void)
+{
+ u8 b;
+ u16 w;
+
+ b = readb(&musbr->faddr);
+ serial_printf("\tfaddr 0x%2.2x\n", b);
+
+ b = readb(&musbr->power);
+ musb_print_pwr(b);
+
+ w = readw(&musbr->ep[0].ep0.csr0);
+ musb_print_csr0(w);
+
+ b = readb(&musbr->devctl);
+ musb_print_devctl(b);
+
+ b = readb(&musbr->ep[0].ep0.configdata);
+ musb_print_config(b);
+
+ w = readw(&musbr->frame);
+ serial_printf("\tframe 0x%4.4x\n", w);
+
+ b = readb(&musbr->index);
+ serial_printf("\tindex 0x%2.2x\n", b);
+
+ w = readw(&musbr->ep[1].epN.rxmaxp);
+ musb_print_rxmaxp(w);
+
+ w = readw(&musbr->ep[1].epN.rxcsr);
+ musb_print_rxcsr(w);
+
+ w = readw(&musbr->ep[1].epN.txmaxp);
+ musb_print_txmaxp(w);
+
+ w = readw(&musbr->ep[1].epN.txcsr);
+ musb_print_txcsr(w);
+}
+#else
+#define musb_db_regs()
+#endif /* DEBUG_MUSB */
+
+static void musb_peri_softconnect(void)
+{
+ u8 power, devctl;
+ u8 intrusb;
+ u16 intrrx, intrtx;
+
+ /* Power off MUSB */
+ power = readb(&musbr->power);
+ power &= ~MUSB_POWER_SOFTCONN;
+ writeb(power, &musbr->power);
+
+ /* Read intr to clear */
+ intrusb = readb(&musbr->intrusb);
+ intrrx = readw(&musbr->intrrx);
+ intrtx = readw(&musbr->intrtx);
+
+ udelay(1000 * 1000); /* 1 sec */
+
+ /* Power on MUSB */
+ power = readb(&musbr->power);
+ power |= MUSB_POWER_SOFTCONN;
+ /*
+ * The usb device interface is usb 1.1
+ * Disable 2.0 high speed by clearring the hsenable bit.
+ */
+ power &= ~MUSB_POWER_HSENAB;
+ writeb(power, &musbr->power);
+
+ /* Check if device is in b-peripheral mode */
+ devctl = readb(&musbr->devctl);
+ if (!(devctl & MUSB_DEVCTL_BDEVICE) ||
+ (devctl & MUSB_DEVCTL_HM)) {
+ serial_printf("ERROR : Unsupport USB mode\n");
+ serial_printf("Check that mini-B USB cable is attached "
+ "to the device\n");
+ }
+
+ if (debug_setup && (debug_level > 1))
+ musb_db_regs();
+}
+
+static void musb_peri_reset(void)
+{
+ if ((debug_setup) && (debug_level > 1))
+ serial_printf("INFO : %s reset\n", __PRETTY_FUNCTION__);
+
+ if (ep0_endpoint)
+ ep0_endpoint->endpoint_address = 0xff;
+
+ /* Sync sw and hw addresses */
+ writeb(udc_device->address, &musbr->faddr);
+
+ SET_EP0_STATE(IDLE);
+}
+
+static void musb_peri_resume(void)
+{
+ /* noop */
+}
+
+static void musb_peri_ep0_stall(void)
+{
+ u16 csr0;
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+ csr0 |= MUSB_CSR0_P_SENDSTALL;
+ writew(csr0, &musbr->ep[0].ep0.csr0);
+ if ((debug_setup) && (debug_level > 1))
+ serial_printf("INFO : %s stall\n", __PRETTY_FUNCTION__);
+}
+
+static void musb_peri_ep0_ack_req(void)
+{
+ u16 csr0;
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+ csr0 |= MUSB_CSR0_P_SVDRXPKTRDY;
+ writew(csr0, &musbr->ep[0].ep0.csr0);
+}
+
+static void musb_ep0_tx_ready(void)
+{
+ u16 csr0;
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+ csr0 |= MUSB_CSR0_TXPKTRDY;
+ writew(csr0, &musbr->ep[0].ep0.csr0);
+}
+
+static void musb_ep0_tx_ready_and_last(void)
+{
+ u16 csr0;
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+ csr0 |= (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_P_DATAEND);
+ writew(csr0, &musbr->ep[0].ep0.csr0);
+}
+
+static void musb_peri_ep0_last(void)
+{
+ u16 csr0;
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+ csr0 |= MUSB_CSR0_P_DATAEND;
+ writew(csr0, &musbr->ep[0].ep0.csr0);
+}
+
+static void musb_peri_ep0_set_address(void)
+{
+ u8 faddr;
+ writeb(udc_device->address, &musbr->faddr);
+
+ /* Verify */
+ faddr = readb(&musbr->faddr);
+ if (udc_device->address == faddr) {
+ SET_EP0_STATE(IDLE);
+ usbd_device_event_irq(udc_device, DEVICE_ADDRESS_ASSIGNED, 0);
+ if ((debug_setup) && (debug_level > 1))
+ serial_printf("INFO : %s Address set to %d\n",
+ __PRETTY_FUNCTION__, udc_device->address);
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s Address missmatch "
+ "sw %d vs hw %d\n",
+ __PRETTY_FUNCTION__,
+ udc_device->address, faddr);
+ }
+}
+
+static void musb_peri_rx_ack(unsigned int ep)
+{
+ u16 peri_rxcsr;
+
+ peri_rxcsr = readw(&musbr->ep[ep].epN.rxcsr);
+ peri_rxcsr &= ~MUSB_RXCSR_RXPKTRDY;
+ writew(peri_rxcsr, &musbr->ep[ep].epN.rxcsr);
+}
+
+static void musb_peri_tx_ready(unsigned int ep)
+{
+ u16 peri_txcsr;
+
+ peri_txcsr = readw(&musbr->ep[ep].epN.txcsr);
+ peri_txcsr |= MUSB_TXCSR_TXPKTRDY;
+ writew(peri_txcsr, &musbr->ep[ep].epN.txcsr);
+}
+
+static void musb_peri_ep0_zero_data_request(int err)
+{
+ musb_peri_ep0_ack_req();
+
+ if (err) {
+ musb_peri_ep0_stall();
+ SET_EP0_STATE(IDLE);
+ } else {
+
+ musb_peri_ep0_last();
+
+ /* USBD state */
+ switch (ep0_urb->device_request.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ if ((debug_setup) && (debug_level > 1))
+ serial_printf("INFO : %s received set "
+ "address\n", __PRETTY_FUNCTION__);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ if ((debug_setup) && (debug_level > 1))
+ serial_printf("INFO : %s Configured\n",
+ __PRETTY_FUNCTION__);
+ usbd_device_event_irq(udc_device, DEVICE_CONFIGURED, 0);
+ break;
+ }
+
+ /* EP0 state */
+ if (USB_REQ_SET_ADDRESS == ep0_urb->device_request.bRequest) {
+ SET_EP0_STATE(SET_ADDRESS);
+ } else {
+ SET_EP0_STATE(IDLE);
+ }
+ }
+}
+
+static void musb_peri_ep0_rx_data_request(void)
+{
+ /*
+ * This is the completion of the data OUT / RX
+ *
+ * Host is sending data to ep0 that is not
+ * part of setup. This comes from the cdc_recv_setup
+ * op that is device specific.
+ *
+ */
+ musb_peri_ep0_ack_req();
+
+ ep0_endpoint->rcv_urb = ep0_urb;
+ ep0_urb->actual_length = 0;
+ SET_EP0_STATE(RX);
+}
+
+static void musb_peri_ep0_tx_data_request(int err)
+{
+ if (err) {
+ musb_peri_ep0_stall();
+ SET_EP0_STATE(IDLE);
+ } else {
+ musb_peri_ep0_ack_req();
+
+ ep0_endpoint->tx_urb = ep0_urb;
+ ep0_endpoint->sent = 0;
+ SET_EP0_STATE(TX);
+ }
+}
+
+static void musb_peri_ep0_idle(void)
+{
+ u16 count0;
+ int err;
+ u16 csr0;
+
+ /*
+ * Verify addresses
+ * A lot of confusion can be caused if the address
+ * in software, udc layer, does not agree with the
+ * hardware. Since the setting of the hardware address
+ * must be set after the set address request, the
+ * usb state machine is out of sync for a few frame.
+ * It is a good idea to run this check when changes
+ * are made to the state machine.
+ */
+ if ((debug_level > 0) &&
+ (ep0_state != SET_ADDRESS)) {
+ u8 faddr;
+
+ faddr = readb(&musbr->faddr);
+ if (udc_device->address != faddr) {
+ serial_printf("ERROR : %s addresses do not"
+ "match sw %d vs hw %d\n",
+ __PRETTY_FUNCTION__,
+ udc_device->address, faddr);
+ udelay(1000 * 1000);
+ hang();
+ }
+ }
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+
+ if (!(MUSB_CSR0_RXPKTRDY & csr0))
+ goto end;
+
+ count0 = readw(&musbr->ep[0].ep0.count0);
+ if (count0 == 0)
+ goto end;
+
+ if (count0 != 8) {
+ if ((debug_setup) && (debug_level > 1))
+ serial_printf("WARN : %s SETUP incorrect size %d\n",
+ __PRETTY_FUNCTION__, count0);
+ musb_peri_ep0_stall();
+ goto end;
+ }
+
+ read_fifo(0, count0, &ep0_urb->device_request);
+
+ if (debug_level > 2)
+ print_usb_device_request(&ep0_urb->device_request);
+
+ if (ep0_urb->device_request.wLength == 0) {
+ err = ep0_recv_setup(ep0_urb);
+
+ /* Zero data request */
+ musb_peri_ep0_zero_data_request(err);
+ } else {
+ /* Is data coming or going ? */
+ u8 reqType = ep0_urb->device_request.bmRequestType;
+
+ if (USB_REQ_DEVICE2HOST == (reqType & USB_REQ_DIRECTION_MASK)) {
+ err = ep0_recv_setup(ep0_urb);
+ /* Device to host */
+ musb_peri_ep0_tx_data_request(err);
+ } else {
+ /*
+ * Host to device
+ *
+ * The RX routine will call ep0_recv_setup
+ * when the data packet has arrived.
+ */
+ musb_peri_ep0_rx_data_request();
+ }
+ }
+
+end:
+ return;
+}
+
+static void musb_peri_ep0_rx(void)
+{
+ /*
+ * This is the completion of the data OUT / RX
+ *
+ * Host is sending data to ep0 that is not
+ * part of setup. This comes from the cdc_recv_setup
+ * op that is device specific.
+ *
+ * Pass the data back to driver ep0_recv_setup which
+ * should give the cdc_recv_setup the chance to handle
+ * the rx
+ */
+ u16 csr0;
+ u16 count0;
+
+ if (debug_level > 3) {
+ if (0 != ep0_urb->actual_length) {
+ serial_printf("%s finished ? %d of %d\n",
+ __PRETTY_FUNCTION__,
+ ep0_urb->actual_length,
+ ep0_urb->device_request.wLength);
+ }
+ }
+
+ if (ep0_urb->device_request.wLength == ep0_urb->actual_length) {
+ musb_peri_ep0_last();
+ SET_EP0_STATE(IDLE);
+ ep0_recv_setup(ep0_urb);
+ return;
+ }
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+ if (!(MUSB_CSR0_RXPKTRDY & csr0))
+ return;
+
+ count0 = readw(&musbr->ep[0].ep0.count0);
+
+ if (count0) {
+ struct usb_endpoint_instance *endpoint;
+ u32 length;
+ u8 *data;
+
+ endpoint = ep0_endpoint;
+ if (endpoint && endpoint->rcv_urb) {
+ struct urb *urb = endpoint->rcv_urb;
+ unsigned int remaining_space = urb->buffer_length -
+ urb->actual_length;
+
+ if (remaining_space) {
+ int urb_bad = 0; /* urb is good */
+
+ if (count0 > remaining_space)
+ length = remaining_space;
+ else
+ length = count0;
+
+ data = (u8 *) urb->buffer_data;
+ data += urb->actual_length;
+
+ /* The common musb fifo reader */
+ read_fifo(0, length, data);
+
+ musb_peri_ep0_ack_req();
+
+ /*
+ * urb's actual_length is updated in
+ * usbd_rcv_complete
+ */
+ usbd_rcv_complete(endpoint, length, urb_bad);
+
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s no space in "
+ "rcv buffer\n",
+ __PRETTY_FUNCTION__);
+ }
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s problem with "
+ "endpoint\n",
+ __PRETTY_FUNCTION__);
+ }
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s with nothing to do\n",
+ __PRETTY_FUNCTION__);
+ }
+}
+
+static void musb_peri_ep0_tx(void)
+{
+ u16 csr0;
+ int transfer_size = 0;
+ unsigned int p, pm;
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+
+ /* Check for pending tx */
+ if (csr0 & MUSB_CSR0_TXPKTRDY)
+ goto end;
+
+ /* Check if this is the last packet sent */
+ if (ep0_endpoint->sent >= ep0_urb->actual_length) {
+ SET_EP0_STATE(IDLE);
+ goto end;
+ }
+
+ transfer_size = ep0_urb->actual_length - ep0_endpoint->sent;
+ /* Is the transfer size negative ? */
+ if (transfer_size <= 0) {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s problem with the"
+ " transfer size %d\n",
+ __PRETTY_FUNCTION__,
+ transfer_size);
+ SET_EP0_STATE(IDLE);
+ goto end;
+ }
+
+ /* Truncate large transfers to the fifo size */
+ if (transfer_size > ep0_endpoint->tx_packetSize)
+ transfer_size = ep0_endpoint->tx_packetSize;
+
+ write_fifo(0, transfer_size, &ep0_urb->buffer[ep0_endpoint->sent]);
+ ep0_endpoint->sent += transfer_size;
+
+ /* Done or more to send ? */
+ if (ep0_endpoint->sent >= ep0_urb->actual_length)
+ musb_ep0_tx_ready_and_last();
+ else
+ musb_ep0_tx_ready();
+
+ /* Wait a bit */
+ pm = 10;
+ for (p = 0; p < pm; p++) {
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+ if (!(csr0 & MUSB_CSR0_TXPKTRDY))
+ break;
+
+ /* Double the delay. */
+ udelay(1 << pm);
+ }
+
+ if ((ep0_endpoint->sent >= ep0_urb->actual_length) && (p < pm))
+ SET_EP0_STATE(IDLE);
+
+end:
+ return;
+}
+
+static void musb_peri_ep0(void)
+{
+ u16 csr0;
+
+ if (SET_ADDRESS == ep0_state)
+ return;
+
+ csr0 = readw(&musbr->ep[0].ep0.csr0);
+
+ /* Error conditions */
+ if (MUSB_CSR0_P_SENTSTALL & csr0) {
+ csr0 &= ~MUSB_CSR0_P_SENTSTALL;
+ writew(csr0, &musbr->ep[0].ep0.csr0);
+ SET_EP0_STATE(IDLE);
+ }
+ if (MUSB_CSR0_P_SETUPEND & csr0) {
+ csr0 |= MUSB_CSR0_P_SVDSETUPEND;
+ writew(csr0, &musbr->ep[0].ep0.csr0);
+ SET_EP0_STATE(IDLE);
+ if ((debug_setup) && (debug_level > 1))
+ serial_printf("WARN: %s SETUPEND\n",
+ __PRETTY_FUNCTION__);
+ }
+
+ /* Normal states */
+ if (IDLE == ep0_state)
+ musb_peri_ep0_idle();
+
+ if (TX == ep0_state)
+ musb_peri_ep0_tx();
+
+ if (RX == ep0_state)
+ musb_peri_ep0_rx();
+}
+
+static void musb_peri_rx_ep(unsigned int ep)
+{
+ u16 peri_rxcount = readw(&musbr->ep[ep].epN.rxcount);
+
+ if (peri_rxcount) {
+ struct usb_endpoint_instance *endpoint;
+ u32 length;
+ u8 *data;
+
+ endpoint = GET_ENDPOINT(udc_device, ep);
+ if (endpoint && endpoint->rcv_urb) {
+ struct urb *urb = endpoint->rcv_urb;
+ unsigned int remaining_space = urb->buffer_length -
+ urb->actual_length;
+
+ if (remaining_space) {
+ int urb_bad = 0; /* urb is good */
+
+ if (peri_rxcount > remaining_space)
+ length = remaining_space;
+ else
+ length = peri_rxcount;
+
+ data = (u8 *) urb->buffer_data;
+ data += urb->actual_length;
+
+ /* The common musb fifo reader */
+ read_fifo(ep, length, data);
+
+ musb_peri_rx_ack(ep);
+
+ /*
+ * urb's actual_length is updated in
+ * usbd_rcv_complete
+ */
+ usbd_rcv_complete(endpoint, length, urb_bad);
+
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s %d no space "
+ "in rcv buffer\n",
+ __PRETTY_FUNCTION__, ep);
+ }
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s %d problem with "
+ "endpoint\n",
+ __PRETTY_FUNCTION__, ep);
+ }
+
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s %d with nothing to do\n",
+ __PRETTY_FUNCTION__, ep);
+ }
+}
+
+static void musb_peri_rx(u16 intr)
+{
+ unsigned int ep;
+
+ /* Check for EP0 */
+ if (0x01 & intr)
+ musb_peri_ep0();
+
+ for (ep = 1; ep < 16; ep++) {
+ if ((1 << ep) & intr)
+ musb_peri_rx_ep(ep);
+ }
+}
+
+static void musb_peri_tx(u16 intr)
+{
+ /* Check for EP0 */
+ if (0x01 & intr)
+ musb_peri_ep0_tx();
+
+ /*
+ * Use this in the future when handling epN tx
+ *
+ * u8 ep;
+ *
+ * for (ep = 1; ep < 16; ep++) {
+ * if ((1 << ep) & intr) {
+ * / * handle tx for this endpoint * /
+ * }
+ * }
+ */
+}
+
+void udc_irq(void)
+{
+ /* This is a high freq called function */
+ if (enabled) {
+ u8 intrusb;
+
+ intrusb = readb(&musbr->intrusb);
+
+ /*
+ * See drivers/usb/gadget/mpc8xx_udc.c for
+ * state diagram going from detached through
+ * configuration.
+ */
+ if (MUSB_INTR_RESUME & intrusb) {
+ usbd_device_event_irq(udc_device,
+ DEVICE_BUS_ACTIVITY, 0);
+ musb_peri_resume();
+ }
+
+ musb_peri_ep0();
+
+ if (MUSB_INTR_RESET & intrusb) {
+ usbd_device_event_irq(udc_device, DEVICE_RESET, 0);
+ musb_peri_reset();
+ }
+
+ if (MUSB_INTR_DISCONNECT & intrusb) {
+ /* cable unplugged from hub/host */
+ usbd_device_event_irq(udc_device, DEVICE_RESET, 0);
+ musb_peri_reset();
+ usbd_device_event_irq(udc_device, DEVICE_HUB_RESET, 0);
+ }
+
+ if (MUSB_INTR_SOF & intrusb) {
+ usbd_device_event_irq(udc_device,
+ DEVICE_BUS_ACTIVITY, 0);
+ musb_peri_resume();
+ }
+
+ if (MUSB_INTR_SUSPEND & intrusb) {
+ usbd_device_event_irq(udc_device,
+ DEVICE_BUS_INACTIVE, 0);
+ }
+
+ if (ep0_state != SET_ADDRESS) {
+ u16 intrrx, intrtx;
+
+ intrrx = readw(&musbr->intrrx);
+ intrtx = readw(&musbr->intrtx);
+
+ if (intrrx)
+ musb_peri_rx(intrrx);
+
+ if (intrtx)
+ musb_peri_tx(intrtx);
+ } else {
+ if (MUSB_INTR_SOF & intrusb) {
+ u8 faddr;
+ faddr = readb(&musbr->faddr);
+ /*
+ * Setting of the address can fail.
+ * Normally it succeeds the second time.
+ */
+ if (udc_device->address != faddr)
+ musb_peri_ep0_set_address();
+ }
+ }
+ }
+}
+
+void udc_set_nak(int ep_num)
+{
+ /* noop */
+}
+
+void udc_unset_nak(int ep_num)
+{
+ /* noop */
+}
+
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint)
+{
+ int ret = 0;
+
+ /* Transmit only if the hardware is available */
+ if (endpoint->tx_urb && endpoint->state == 0) {
+ unsigned int ep = endpoint->endpoint_address &
+ USB_ENDPOINT_NUMBER_MASK;
+
+ u16 peri_txcsr = readw(&musbr->ep[ep].epN.txcsr);
+
+ /* Error conditions */
+ if (peri_txcsr & MUSB_TXCSR_P_UNDERRUN) {
+ peri_txcsr &= ~MUSB_TXCSR_P_UNDERRUN;
+ writew(peri_txcsr, &musbr->ep[ep].epN.txcsr);
+ }
+
+ if (debug_level > 1)
+ musb_print_txcsr(peri_txcsr);
+
+ /* Check if a packet is waiting to be sent */
+ if (!(peri_txcsr & MUSB_TXCSR_TXPKTRDY)) {
+ u32 length;
+ u8 *data;
+ struct urb *urb = endpoint->tx_urb;
+ unsigned int remaining_packet = urb->actual_length -
+ endpoint->sent;
+
+ if (endpoint->tx_packetSize < remaining_packet)
+ length = endpoint->tx_packetSize;
+ else
+ length = remaining_packet;
+
+ data = (u8 *) urb->buffer;
+ data += endpoint->sent;
+
+ /* common musb fifo function */
+ write_fifo(ep, length, data);
+
+ musb_peri_tx_ready(ep);
+
+ endpoint->last = length;
+ /* usbd_tx_complete will take care of updating 'sent' */
+ usbd_tx_complete(endpoint);
+ }
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s Problem with urb %p "
+ "or ep state %d\n",
+ __PRETTY_FUNCTION__,
+ endpoint->tx_urb, endpoint->state);
+ }
+
+ return ret;
+}
+
+void udc_setup_ep(struct usb_device_instance *device, unsigned int id,
+ struct usb_endpoint_instance *endpoint)
+{
+ if (0 == id) {
+ /* EP0 */
+ ep0_endpoint = endpoint;
+ ep0_endpoint->endpoint_address = 0xff;
+ ep0_urb = usbd_alloc_urb(device, endpoint);
+ } else if (MAX_ENDPOINT >= id) {
+ int ep_addr;
+
+ /* Check the direction */
+ ep_addr = endpoint->endpoint_address;
+ if (USB_DIR_IN == (ep_addr & USB_ENDPOINT_DIR_MASK)) {
+ /* IN */
+ epinfo[(id * 2) + 1].epsize = endpoint->tx_packetSize;
+ } else {
+ /* OUT */
+ epinfo[id * 2].epsize = endpoint->rcv_packetSize;
+ }
+
+ musb_configure_ep(&epinfo[0],
+ sizeof(epinfo) / sizeof(struct musb_epinfo));
+ } else {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s endpoint request %d "
+ "exceeds maximum %d\n",
+ __PRETTY_FUNCTION__, id, MAX_ENDPOINT);
+ }
+}
+
+void udc_connect(void)
+{
+ /* noop */
+}
+
+void udc_disconnect(void)
+{
+ /* noop */
+}
+
+void udc_enable(struct usb_device_instance *device)
+{
+ /* Save the device structure pointer */
+ udc_device = device;
+
+ enabled = 1;
+}
+
+void udc_disable(void)
+{
+ enabled = 0;
+}
+
+void udc_startup_events(struct usb_device_instance *device)
+{
+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
+ usbd_device_event_irq(device, DEVICE_INIT, 0);
+
+ /*
+ * The DEVICE_CREATE event puts the USB device in the state
+ * STATE_ATTACHED.
+ */
+ usbd_device_event_irq(device, DEVICE_CREATE, 0);
+
+ /* Resets the address to 0 */
+ usbd_device_event_irq(device, DEVICE_RESET, 0);
+
+ udc_enable(device);
+}
+
+int udc_init(void)
+{
+ int ret;
+ int ep_loop;
+
+ ret = musb_platform_init();
+ if (ret < 0)
+ goto end;
+
+ /* Configure all the endpoint FIFO's and start usb controller */
+ musbr = musb_cfg.regs;
+
+ /* Initialize the endpoints */
+ for (ep_loop = 0; ep_loop < MAX_ENDPOINT * 2; ep_loop++) {
+ epinfo[ep_loop].epnum = (ep_loop / 2) + 1;
+ epinfo[ep_loop].epdir = ep_loop % 2; /* OUT, IN */
+ epinfo[ep_loop].epsize = 0;
+ }
+
+ musb_peri_softconnect();
+
+ ret = 0;
+end:
+
+ return ret;
+}
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
new file mode 100644
index 0000000000..ea98c3cac1
--- /dev/null
+++ b/drivers/usb/musb/omap3.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This is file is based on
+ * repository git.gitorious.org/u-boot-omap3/mainline.git,
+ * branch omap3-dev-usb, file drivers/usb/host/omap3530_usb.c
+ *
+ * This is the unique part of its copyright :
+ *
+ * ------------------------------------------------------------------------
+ *
+ * Copyright (c) 2009 Texas Instruments
+ *
+ * ------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <twl4030.h>
+#include "omap3.h"
+
+static int platform_needs_initialization = 1;
+
+struct musb_config musb_cfg = {
+ (struct musb_regs *)MENTOR_USB0_BASE,
+ OMAP3_USB_TIMEOUT,
+ 0
+};
+
+/*
+ * OMAP3 USB OTG registers.
+ */
+struct omap3_otg_regs {
+ u32 revision;
+ u32 sysconfig;
+ u32 sysstatus;
+ u32 interfsel;
+ u32 simenable;
+ u32 forcestdby;
+};
+
+static struct omap3_otg_regs *otg;
+
+#define OMAP3_OTG_SYSCONFIG_SMART_STANDBY_MODE 0x2000
+#define OMAP3_OTG_SYSCONFIG_NO_STANDBY_MODE 0x1000
+#define OMAP3_OTG_SYSCONFIG_SMART_IDLE_MODE 0x0010
+#define OMAP3_OTG_SYSCONFIG_NO_IDLE_MODE 0x0008
+#define OMAP3_OTG_SYSCONFIG_ENABLEWAKEUP 0x0004
+#define OMAP3_OTG_SYSCONFIG_SOFTRESET 0x0002
+#define OMAP3_OTG_SYSCONFIG_AUTOIDLE 0x0001
+
+#define OMAP3_OTG_SYSSTATUS_RESETDONE 0x0001
+
+#define OMAP3_OTG_INTERFSEL_OMAP 0x0001
+
+#define OMAP3_OTG_FORCESTDBY_STANDBY 0x0001
+
+
+#ifdef DEBUG_MUSB_OMAP3
+static void musb_db_otg_regs(void)
+{
+ u32 l;
+ l = readl(&otg->revision);
+ serial_printf("OTG_REVISION 0x%x\n", l);
+ l = readl(&otg->sysconfig);
+ serial_printf("OTG_SYSCONFIG 0x%x\n", l);
+ l = readl(&otg->sysstatus);
+ serial_printf("OTG_SYSSTATUS 0x%x\n", l);
+ l = readl(&otg->interfsel);
+ serial_printf("OTG_INTERFSEL 0x%x\n", l);
+ l = readl(&otg->forcestdby);
+ serial_printf("OTG_FORCESTDBY 0x%x\n", l);
+}
+#endif
+
+int musb_platform_init(void)
+{
+ int ret = -1;
+
+ if (platform_needs_initialization) {
+ u32 stdby;
+
+ /*
+ * OMAP3EVM uses ISP1504 phy and so
+ * twl4030 related init is not required.
+ */
+#ifdef CONFIG_TWL4030_USB
+ if (twl4030_usb_ulpi_init()) {
+ serial_printf("ERROR: %s Could not initialize PHY\n",
+ __PRETTY_FUNCTION__);
+ goto end;
+ }
+#endif
+ otg = (struct omap3_otg_regs *)OMAP3_OTG_BASE;
+
+ /* Set OTG to always be on */
+ writel(OMAP3_OTG_SYSCONFIG_NO_STANDBY_MODE |
+ OMAP3_OTG_SYSCONFIG_NO_IDLE_MODE, &otg->sysconfig);
+
+ /* Set the interface */
+ writel(OMAP3_OTG_INTERFSEL_OMAP, &otg->interfsel);
+
+ /* Clear force standby */
+ stdby = readl(&otg->forcestdby);
+ stdby &= ~OMAP3_OTG_FORCESTDBY_STANDBY;
+ writel(stdby, &otg->forcestdby);
+
+ platform_needs_initialization = 0;
+ }
+
+ ret = platform_needs_initialization;
+end:
+ return ret;
+
+}
+
+void musb_platform_deinit(void)
+{
+ /* noop */
+}
diff --git a/drivers/usb/musb/omap3.h b/drivers/usb/musb/omap3.h
new file mode 100644
index 0000000000..20fc9d294a
--- /dev/null
+++ b/drivers/usb/musb/omap3.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This file is based on the file drivers/usb/musb/davinci.h
+ *
+ * This is the unique part of its copyright:
+ *
+ * --------------------------------------------------------------------
+ *
+ * Copyright (c) 2008 Texas Instruments
+ * Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
+ *
+ * --------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _MUSB_OMAP3_H_
+#define _MUSB_OMAP3_H_
+
+#include "musb_core.h"
+
+/* Base address of MUSB registers */
+#define MENTOR_USB0_BASE (OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+
+/* Base address of OTG registers */
+#define OMAP3_OTG_BASE (MENTOR_USB0_BASE + 0x400)
+
+/* Timeout for USB module */
+#define OMAP3_USB_TIMEOUT 0x3FFFFFF
+
+int musb_platform_init(void);
+
+#endif /* _MUSB_OMAP3_H */
+
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
new file mode 100644
index 0000000000..200b907d97
--- /dev/null
+++ b/drivers/usb/phy/Makefile
@@ -0,0 +1,44 @@
+#
+# Copyright (c) 2009 Wind River Systems, Inc.
+# Tom Rix <Tom.Rix@windriver.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libusb_phy.a
+
+COBJS-$(CONFIG_TWL4030_USB) += twl4030.o
+COBJS-y := twl4030.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/usb/phy/twl4030.c b/drivers/usb/phy/twl4030.c
new file mode 100644
index 0000000000..54d2e615c8
--- /dev/null
+++ b/drivers/usb/phy/twl4030.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This is file is based on
+ * repository git.gitorious.org/u-boot-omap3/mainline.git,
+ * branch omap3-dev-usb, file drivers/usb/gadget/twl4030_usb.c
+ *
+ * This is the unique part of its copyright :
+ *
+ * ------------------------------------------------------------------------
+ *
+ * * (C) Copyright 2009 Atin Malaviya (atin.malaviya@gmail.com)
+ *
+ * Based on: twl4030_usb.c in linux 2.6 (drivers/i2c/chips/twl4030_usb.c)
+ * Copyright (C) 2004-2007 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * Author: Atin Malaviya (atin.malaviya@gmail.com)
+ *
+ * ------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <twl4030.h>
+
+/* Defines for bits in registers */
+#define OPMODE_MASK (3 << 3)
+#define XCVRSELECT_MASK (3 << 0)
+#define CARKITMODE (1 << 2)
+#define OTG_ENAB (1 << 5)
+#define PHYPWD (1 << 0)
+#define CLOCKGATING_EN (1 << 2)
+#define CLK32K_EN (1 << 1)
+#define REQ_PHY_DPLL_CLK (1 << 0)
+#define PHY_DPLL_CLK (1 << 0)
+
+static int twl4030_usb_write(u8 address, u8 data)
+{
+ int ret;
+
+ ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, data, address);
+ if (ret != 0)
+ printf("TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
+
+ return ret;
+}
+
+static int twl4030_usb_read(u8 address)
+{
+ u8 data;
+ int ret;
+
+ ret = twl4030_i2c_read_u8(TWL4030_CHIP_USB, &data, address);
+ if (ret == 0)
+ ret = data;
+ else
+ printf("TWL4030:USB:Read[0x%x] Error %d\n", address, ret);
+
+ return ret;
+}
+
+static void twl4030_usb_ldo_init(void)
+{
+ /* Enable writing to power configuration registers */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0xC0,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x0C,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+
+ /* put VUSB3V1 LDO in active state */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
+ TWL4030_PM_RECEIVER_VUSB_DEDICATED2);
+
+ /* input to VUSB3V1 LDO is from VBAT, not VBUS */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x14,
+ TWL4030_PM_RECEIVER_VUSB_DEDICATED1);
+
+ /* turn on 3.1V regulator */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
+ TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
+ TWL4030_PM_RECEIVER_VUSB3V1_TYPE);
+
+ /* turn on 1.5V regulator */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
+ TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
+ TWL4030_PM_RECEIVER_VUSB1V5_TYPE);
+
+ /* turn on 1.8V regulator */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
+ TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
+ TWL4030_PM_RECEIVER_VUSB1V8_TYPE);
+
+ /* disable access to power configuration registers */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x00,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+}
+
+static void twl4030_phy_power(void)
+{
+ u8 pwr, clk;
+
+ /* Power the PHY */
+ pwr = twl4030_usb_read(TWL4030_USB_PHY_PWR_CTRL);
+ pwr &= ~PHYPWD;
+ twl4030_usb_write(TWL4030_USB_PHY_PWR_CTRL, pwr);
+ /* Enable clocks */
+ clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL);
+ clk |= CLOCKGATING_EN | CLK32K_EN;
+ twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk);
+}
+
+/*
+ * Initiaze the ULPI interface
+ * ULPI : Universal Transceiver Macrocell Low Pin Interface
+ * An interface between the USB link controller like musb and the
+ * the PHY or transceiver that drives the actual bus.
+ */
+int twl4030_usb_ulpi_init(void)
+{
+ long timeout = 1000 * 1000; /* 1 sec */;
+ u8 clk, sts, pwr;
+
+ /* twl4030 ldo init */
+ twl4030_usb_ldo_init();
+
+ /* Enable the twl4030 phy */
+ twl4030_phy_power();
+
+ /* Enable DPLL to access PHY registers over I2C */
+ clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL);
+ clk |= REQ_PHY_DPLL_CLK;
+ twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk);
+
+ /* Check if the PHY DPLL is locked */
+ sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS);
+ while (!(sts & PHY_DPLL_CLK) && 0 < timeout) {
+ udelay(10);
+ sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS);
+ timeout -= 10;
+ }
+
+ /* Final check */
+ sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS);
+ if (!(sts & PHY_DPLL_CLK)) {
+ printf("Error:TWL4030:USB Timeout setting PHY DPLL clock\n");
+ return -1;
+ }
+
+ /*
+ * There are two circuit blocks attached to the PHY,
+ * Carkit and USB OTG. Disable Carkit and enable USB OTG
+ */
+ twl4030_usb_write(TWL4030_USB_IFC_CTRL_CLR, CARKITMODE);
+ pwr = twl4030_usb_read(TWL4030_USB_POWER_CTRL);
+ pwr |= OTG_ENAB;
+ twl4030_usb_write(TWL4030_USB_POWER_CTRL_SET, pwr);
+
+ /* Clear the opmode bits to ensure normal encode */
+ twl4030_usb_write(TWL4030_USB_FUNC_CTRL_CLR, OPMODE_MASK);
+
+ /* Clear the xcvrselect bits to enable the high speed transeiver */
+ twl4030_usb_write(TWL4030_USB_FUNC_CTRL_CLR, XCVRSELECT_MASK);
+
+ /* Let ULPI control the DPLL clock */
+ clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL);
+ clk &= ~REQ_PHY_DPLL_CLK;
+ twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk);
+
+ return 0;
+}
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index a6fe5e12bd..4fe3bd8bee 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -100,6 +100,21 @@
/* DDR - I use Micron DDR */
#define CONFIG_OMAP3_MICRON_DDR 1
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_TWL4030_USB 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID 0x0451
+#define CONFIG_USBD_PRODUCTID 0x5678
+#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME "Beagle"
+
/* commands to include */
#include <config_cmd_default.h>
@@ -164,6 +179,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
+ "usbtty=cdc_acm\0" \
"console=ttyS2,115200n8\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16@60\0" \
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 00093f83dc..630b00faed 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -104,6 +104,44 @@
/* DDR - I use Micron DDR */
#define CONFIG_OMAP3_MICRON_DDR 1
+/* USB
+ * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
+ * Enable CONFIG_MUSB_UDD for Device functionalities.
+ */
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_MUSB_HCD 1
+/* #define CONFIG_MUSB_UDC 1 */
+
+#ifdef CONFIG_USB_OMAP3
+
+#ifdef CONFIG_MUSB_HCD
+#define CONFIG_CMD_USB
+
+#define CONFIG_USB_STORAGE
+#define CONGIG_CMD_STORAGE
+#define CONFIG_CMD_FAT
+
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_PREBOOT "usb start"
+#endif /* CONFIG_USB_KEYBOARD */
+
+#endif /* CONFIG_MUSB_HCD */
+
+#ifdef CONFIG_MUSB_UDC
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID 0x0451
+#define CONFIG_USBD_PRODUCTID 0x5678
+#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME "EVM"
+#endif /* CONFIG_MUSB_UDC */
+
+#endif /* CONFIG_USB_OMAP3 */
+
/* commands to include */
#include <config_cmd_default.h>
@@ -160,6 +198,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
+ "usbtty=cdc_acm\0" \
"console=ttyS2,115200n8\0" \
"mmcargs=setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rw " \
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index ef7a28bbc5..fa58281593 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -101,6 +101,21 @@
/* DDR - I use Micron DDR */
#define CONFIG_OMAP3_MICRON_DDR 1
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_TWL4030_USB 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID 0x0451
+#define CONFIG_USBD_PRODUCTID 0x5678
+#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME "Zoom1"
+
/* commands to include */
#include <config_cmd_default.h>
@@ -160,6 +175,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
+ "usbtty=cdc_acm\0" \
"console=ttyS2,115200n8\0" \
"videomode=1024x768@60,vxres=1024,vyres=768\0" \
"videospec=omapfb:vram:2M,vram:4M\0" \
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 2b076666e9..7a8beb8505 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -125,6 +125,20 @@
#define CONFIG_OMAP3_GPIO_3 /* board revision */
#define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_TWL4030_USB 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID 0x0451
+#define CONFIG_USBD_PRODUCTID 0x5678
+#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME "Zoom2"
+
/* commands to include */
#include <config_cmd_default.h>
@@ -170,6 +184,9 @@
/* Environment information */
#define CONFIG_BOOTDELAY 10
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "usbtty=cdc_acm\0" \
+
/*
* Miscellaneous configurable options
*/
diff --git a/include/serial.h b/include/serial.h
index bbda3f08c6..f2638ec566 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -66,4 +66,22 @@ extern void serial_stdio_init(void);
extern int serial_assign(char * name);
extern void serial_reinit_all(void);
+/* For usbtty */
+#ifdef CONFIG_USB_TTY
+
+extern int usbtty_getc(void);
+extern void usbtty_putc(const char c);
+extern void usbtty_puts(const char *str);
+extern int usbtty_tstc(void);
+
+#else
+
+/* stubs */
+#define usbtty_getc() 0
+#define usbtty_putc(a)
+#define usbtty_puts(a)
+#define usbtty_tstc() 0
+
+#endif /* CONFIG_USB_TTY */
+
#endif
diff --git a/include/twl4030.h b/include/twl4030.h
index f260ecb8b1..feaec47b36 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -342,21 +342,129 @@
#define TWL4030_KEYPAD_CTRL_SOFT_NRST (1 << 0)
/* USB */
-#define TWL4030_USB_FUNC_CTRL (0x04)
-#define TWL4030_USB_OPMODE_MASK (3 << 3)
-#define TWL4030_USB_XCVRSELECT_MASK (3 << 0)
-#define TWL4030_USB_IFC_CTRL (0x07)
-#define TWL4030_USB_CARKITMODE (1 << 2)
-#define TWL4030_USB_POWER_CTRL (0xAC)
-#define TWL4030_USB_OTG_ENAB (1 << 5)
-#define TWL4030_USB_PHY_PWR_CTRL (0xFD)
-#define TWL4030_USB_PHYPWD (1 << 0)
-#define TWL4030_USB_PHY_CLK_CTRL (0xFE)
-#define TWL4030_USB_CLOCKGATING_EN (1 << 2)
-#define TWL4030_USB_CLK32K_EN (1 << 1)
-#define TWL4030_USB_REQ_PHY_DPLL_CLK (1 << 0)
-#define TWL4030_USB_PHY_CLK_CTRL_STS (0xFF)
-#define TWL4030_USB_PHY_DPLL_CLK (1 << 0)
+#define TWL4030_USB_VENDOR_ID_LO 0x00
+#define TWL4030_USB_VENDOR_ID_HI 0x01
+#define TWL4030_USB_PRODUCT_ID_LO 0x02
+#define TWL4030_USB_PRODUCT_ID_HI 0x03
+#define TWL4030_USB_FUNC_CTRL 0x04
+#define TWL4030_USB_FUNC_CTRL_SET 0x05
+#define TWL4030_USB_FUNC_CTRL_CLR 0x06
+#define TWL4030_USB_IFC_CTRL 0x07
+#define TWL4030_USB_IFC_CTRL_SET 0x08
+#define TWL4030_USB_IFC_CTRL_CLR 0x09
+#define TWL4030_USB_OTG_CTRL 0x0A
+#define TWL4030_USB_OTG_CTRL_SET 0x0B
+#define TWL4030_USB_OTG_CTRL_CLR 0x0C
+#define TWL4030_USB_USB_INT_EN_RISE 0x0D
+#define TWL4030_USB_USB_INT_EN_RISE_SET 0x0E
+#define TWL4030_USB_USB_INT_EN_RISE_CLR 0x0F
+#define TWL4030_USB_USB_INT_EN_FALL 0x10
+#define TWL4030_USB_USB_INT_EN_FALL_SET 0x11
+#define TWL4030_USB_USB_INT_EN_FALL_CLR 0x12
+#define TWL4030_USB_USB_INT_STS 0x13
+#define TWL4030_USB_USB_INT_LATCH 0x14
+#define TWL4030_USB_DEBUG 0x15
+#define TWL4030_USB_SCRATCH_REG 0x16
+#define TWL4030_USB_SCRATCH_REG_SET 0x17
+#define TWL4030_USB_SCRATCH_REG_CLR 0x18
+#define TWL4030_USB_CARKIT_CTRL 0x19
+#define TWL4030_USB_CARKIT_CTRL_SET 0x1A
+#define TWL4030_USB_CARKIT_CTRL_CLR 0x1B
+#define TWL4030_USB_CARKIT_INT_DELAY 0x1C
+#define TWL4030_USB_CARKIT_INT_EN 0x1D
+#define TWL4030_USB_CARKIT_INT_EN_SET 0x1E
+#define TWL4030_USB_CARKIT_INT_EN_CLR 0x1F
+#define TWL4030_USB_CARKIT_INT_STS 0x20
+#define TWL4030_USB_CARKIT_INT_LATCH 0x21
+#define TWL4030_USB_CARKIT_PLS_CTRL 0x22
+#define TWL4030_USB_CARKIT_PLS_CTRL_SET 0x23
+#define TWL4030_USB_CARKIT_PLS_CTRL_CLR 0x24
+#define TWL4030_USB_TRANS_POS_WIDTH 0x25
+#define TWL4030_USB_TRANS_NEG_WIDTH 0x26
+#define TWL4030_USB_RCV_PLTY_RECOVERY 0x27
+#define TWL4030_USB_MCPC_CTRL 0x30
+#define TWL4030_USB_MCPC_CTRL_SET 0x31
+#define TWL4030_USB_MCPC_CTRL_CLR 0x32
+#define TWL4030_USB_MCPC_IO_CTRL 0x33
+#define TWL4030_USB_MCPC_IO_CTRL_SET 0x34
+#define TWL4030_USB_MCPC_IO_CTRL_CLR 0x35
+#define TWL4030_USB_MCPC_CTRL2 0x36
+#define TWL4030_USB_MCPC_CTRL2_SET 0x37
+#define TWL4030_USB_MCPC_CTRL2_CLR 0x38
+#define TWL4030_USB_OTHER_FUNC_CTRL 0x80
+#define TWL4030_USB_OTHER_FUNC_CTRL_SET 0x81
+#define TWL4030_USB_OTHER_FUNC_CTRL_CLR 0x82
+#define TWL4030_USB_OTHER_IFC_CTRL 0x83
+#define TWL4030_USB_OTHER_IFC_CTRL_SET 0x84
+#define TWL4030_USB_OTHER_IFC_CTRL_CLR 0x85
+#define TWL4030_USB_OTHER_INT_EN_RISE_SET 0x87
+#define TWL4030_USB_OTHER_INT_EN_RISE_CLR 0x88
+#define TWL4030_USB_OTHER_INT_EN_FALL 0x89
+#define TWL4030_USB_OTHER_INT_EN_FALL_SET 0x8A
+#define TWL4030_USB_OTHER_INT_EN_FALL_CLR 0x8B
+#define TWL4030_USB_OTHER_INT_STS 0x8C
+#define TWL4030_USB_OTHER_INT_LATCH 0x8D
+#define TWL4030_USB_ID_STATUS 0x96
+#define TWL4030_USB_CARKIT_SM_1_INT_EN 0x97
+#define TWL4030_USB_CARKIT_SM_1_INT_EN_SET 0x98
+#define TWL4030_USB_CARKIT_SM_1_INT_EN_CLR 0x99
+#define TWL4030_USB_CARKIT_SM_1_INT_STS 0x9A
+#define TWL4030_USB_CARKIT_SM_1_INT_LATCH 0x9B
+#define TWL4030_USB_CARKIT_SM_2_INT_EN 0x9C
+#define TWL4030_USB_CARKIT_SM_2_INT_EN_SET 0x9D
+#define TWL4030_USB_CARKIT_SM_2_INT_EN_CLR 0x9E
+#define TWL4030_USB_CARKIT_SM_2_INT_STS 0x9F
+#define TWL4030_USB_CARKIT_SM_2_INT_LATCH 0xA0
+#define TWL4030_USB_CARKIT_SM_CTRL 0xA1
+#define TWL4030_USB_CARKIT_SM_CTRL_SET 0xA2
+#define TWL4030_USB_CARKIT_SM_CTRL_CLR 0xA3
+#define TWL4030_USB_CARKIT_SM_CMD 0xA4
+#define TWL4030_USB_CARKIT_SM_CMD_SET 0xA5
+#define TWL4030_USB_CARKIT_SM_CMD_CLR 0xA6
+#define TWL4030_USB_CARKIT_SM_CMD_STS 0xA7
+#define TWL4030_USB_CARKIT_SM_STATUS 0xA8
+#define TWL4030_USB_CARKIT_SM_ERR_STATUS 0xAA
+#define TWL4030_USB_CARKIT_SM_CTRL_STATE 0xAB
+#define TWL4030_USB_POWER_CTRL 0xAC
+#define TWL4030_USB_POWER_CTRL_SET 0xAD
+#define TWL4030_USB_POWER_CTRL_CLR 0xAE
+#define TWL4030_USB_OTHER_IFC_CTRL2 0xAF
+#define TWL4030_USB_OTHER_IFC_CTRL2_SET 0xB0
+#define TWL4030_USB_OTHER_IFC_CTRL2_CLR 0xB1
+#define TWL4030_USB_REG_CTRL_EN 0xB2
+#define TWL4030_USB_REG_CTRL_EN_SET 0xB3
+#define TWL4030_USB_REG_CTRL_EN_CLR 0xB4
+#define TWL4030_USB_REG_CTRL_ERROR 0xB5
+#define TWL4030_USB_OTHER_FUNC_CTRL2 0xB8
+#define TWL4030_USB_OTHER_FUNC_CTRL2_SET 0xB9
+#define TWL4030_USB_OTHER_FUNC_CTRL2_CLR 0xBA
+#define TWL4030_USB_CARKIT_ANA_CTRL 0xBB
+#define TWL4030_USB_CARKIT_ANA_CTRL_SET 0xBC
+#define TWL4030_USB_CARKIT_ANA_CTRL_CLR 0xBD
+#define TWL4030_USB_VBUS_DEBOUNCE 0xC0
+#define TWL4030_USB_ID_DEBOUNCE 0xC1
+#define TWL4030_USB_TPH_DP_CON_MIN 0xC2
+#define TWL4030_USB_TPH_DP_CON_MAX 0xC3
+#define TWL4030_USB_TCR_DP_CON_MIN 0xC4
+#define TWL4030_USB_TCR_DP_CON_MAX 0xC5
+#define TWL4030_USB_TPH_DP_PD_SHORT 0xC6
+#define TWL4030_USB_TPH_CMD_DLY 0xC7
+#define TWL4030_USB_TPH_DET_RST 0xC8
+#define TWL4030_USB_TPH_AUD_BIAS 0xC9
+#define TWL4030_USB_TCR_UART_DET_MIN 0xCA
+#define TWL4030_USB_TCR_UART_DET_MAX 0xCB
+#define TWL4030_USB_TPH_ID_INT_PW 0xCD
+#define TWL4030_USB_TACC_ID_INT_WAIT 0xCE
+#define TWL4030_USB_TACC_ID_INT_PW 0xCF
+#define TWL4030_USB_TPH_CMD_WAIT 0xD0
+#define TWL4030_USB_TPH_ACK_WAIT 0xD1
+#define TWL4030_USB_TPH_DP_DISC_DET 0xD2
+#define TWL4030_USB_VBAT_TIMER 0xD3
+#define TWL4030_USB_CARKIT_4W_DEBUG 0xE0
+#define TWL4030_USB_CARKIT_5W_DEBUG 0xE1
+#define TWL4030_USB_PHY_PWR_CTRL 0xFD
+#define TWL4030_USB_PHY_CLK_CTRL 0xFE
+#define TWL4030_USB_PHY_CLK_CTRL_STS 0xFF
/*
* Convience functions to read and write from TWL4030
@@ -398,4 +506,9 @@ void twl4030_power_mmc_init(void);
*/
void twl4030_led_init(void);
+/*
+ * USB
+ */
+int twl4030_usb_ulpi_init(void);
+
#endif /* TWL4030_H */
diff --git a/include/usb.h b/include/usb.h
index 7c47098d8a..1cc3e4229d 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -27,6 +27,7 @@
#define _USB_H_
#include <usb_defs.h>
+#include <usbdescriptors.h>
/* Everything is aribtrary */
#define USB_ALTSETTINGALLOC 4
@@ -41,13 +42,6 @@
#define USB_CNTL_TIMEOUT 100 /* 100ms timeout */
-/* String descriptor */
-struct usb_string_descriptor {
- unsigned char bLength;
- unsigned char bDescriptorType;
- unsigned short wData[1];
-} __attribute__ ((packed));
-
/* device request (setup) */
struct devrequest {
unsigned char requesttype;
@@ -63,47 +57,9 @@ struct usb_descriptor_header {
unsigned char bDescriptorType;
} __attribute__ ((packed));
-/* Device descriptor */
-struct usb_device_descriptor {
- unsigned char bLength;
- unsigned char bDescriptorType;
- unsigned short bcdUSB;
- unsigned char bDeviceClass;
- unsigned char bDeviceSubClass;
- unsigned char bDeviceProtocol;
- unsigned char bMaxPacketSize0;
- unsigned short idVendor;
- unsigned short idProduct;
- unsigned short bcdDevice;
- unsigned char iManufacturer;
- unsigned char iProduct;
- unsigned char iSerialNumber;
- unsigned char bNumConfigurations;
-} __attribute__ ((packed));
-
-/* Endpoint descriptor */
-struct usb_endpoint_descriptor {
- unsigned char bLength;
- unsigned char bDescriptorType;
- unsigned char bEndpointAddress;
- unsigned char bmAttributes;
- unsigned short wMaxPacketSize;
- unsigned char bInterval;
- unsigned char bRefresh;
- unsigned char bSynchAddress;
-} __attribute__ ((packed)) __attribute__ ((aligned(2)));
-
-/* Interface descriptor */
-struct usb_interface_descriptor {
- unsigned char bLength;
- unsigned char bDescriptorType;
- unsigned char bInterfaceNumber;
- unsigned char bAlternateSetting;
- unsigned char bNumEndpoints;
- unsigned char bInterfaceClass;
- unsigned char bInterfaceSubClass;
- unsigned char bInterfaceProtocol;
- unsigned char iInterface;
+/* Interface */
+struct usb_interface {
+ struct usb_interface_descriptor desc;
unsigned char no_of_ep;
unsigned char num_altsetting;
@@ -112,20 +68,12 @@ struct usb_interface_descriptor {
struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
} __attribute__ ((packed));
-
-/* Configuration descriptor information.. */
-struct usb_config_descriptor {
- unsigned char bLength;
- unsigned char bDescriptorType;
- unsigned short wTotalLength;
- unsigned char bNumInterfaces;
- unsigned char bConfigurationValue;
- unsigned char iConfiguration;
- unsigned char bmAttributes;
- unsigned char MaxPower;
+/* Configuration information.. */
+struct usb_config {
+ struct usb_configuration_descriptor desc;
unsigned char no_of_if; /* number of interfaces */
- struct usb_interface_descriptor if_desc[USB_MAXINTERFACES];
+ struct usb_interface if_desc[USB_MAXINTERFACES];
} __attribute__ ((packed));
enum {
@@ -156,7 +104,7 @@ struct usb_device {
int configno; /* selected config number */
struct usb_device_descriptor descriptor; /* Device Descriptor */
- struct usb_config_descriptor config; /* config descriptor */
+ struct usb_config config; /* config descriptor */
int have_langid; /* whether string_langid is valid yet */
int string_langid; /* language ID for strings */
@@ -183,7 +131,8 @@ struct usb_device {
#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
- defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI)
+ defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
+ defined(CONFIG_USB_OMAP3)
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
diff --git a/include/usb/musb_udc.h b/include/usb/musb_udc.h
new file mode 100644
index 0000000000..ef37dbbcc4
--- /dev/null
+++ b/include/usb/musb_udc.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __MUSB_UDC_H__
+#define __MUSB_UDC_H__
+
+#include <usbdevice.h>
+
+/* UDC level routines */
+void udc_irq(void);
+void udc_set_nak(int ep_num);
+void udc_unset_nak(int ep_num);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+void udc_setup_ep(struct usb_device_instance *device, unsigned int id,
+ struct usb_endpoint_instance *endpoint);
+void udc_connect(void);
+void udc_disconnect(void);
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+void udc_startup_events(struct usb_device_instance *device);
+int udc_init(void);
+
+/* usbtty */
+#ifdef CONFIG_USB_TTY
+
+#define EP0_MAX_PACKET_SIZE 64 /* MUSB_EP0_FIFOSIZE */
+#define UDC_INT_ENDPOINT 1
+#define UDC_INT_PACKET_SIZE 64
+#define UDC_OUT_ENDPOINT 2
+#define UDC_OUT_PACKET_SIZE 64
+#define UDC_IN_ENDPOINT 3
+#define UDC_IN_PACKET_SIZE 64
+#define UDC_BULK_PACKET_SIZE 64
+
+#endif /* CONFIG_USB_TTY */
+
+#endif /* __MUSB_UDC_H__ */
+
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index a752097e5b..2dec3b93d6 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -504,4 +504,30 @@ struct usb_class_descriptor {
} __attribute__ ((packed));
+#ifdef DEBUG
+static inline void print_device_descriptor(struct usb_device_descriptor *d)
+{
+ serial_printf("usb device descriptor \n");
+ serial_printf("\tbLength %2.2x\n", d->bLength);
+ serial_printf("\tbDescriptorType %2.2x\n", d->bDescriptorType);
+ serial_printf("\tbcdUSB %4.4x\n", d->bcdUSB);
+ serial_printf("\tbDeviceClass %2.2x\n", d->bDeviceClass);
+ serial_printf("\tbDeviceSubClass %2.2x\n", d->bDeviceSubClass);
+ serial_printf("\tbDeviceProtocol %2.2x\n", d->bDeviceProtocol);
+ serial_printf("\tbMaxPacketSize0 %2.2x\n", d->bMaxPacketSize0);
+ serial_printf("\tidVendor %4.4x\n", d->idVendor);
+ serial_printf("\tidProduct %4.4x\n", d->idProduct);
+ serial_printf("\tbcdDevice %4.4x\n", d->bcdDevice);
+ serial_printf("\tiManufacturer %2.2x\n", d->iManufacturer);
+ serial_printf("\tiProduct %2.2x\n", d->iProduct);
+ serial_printf("\tiSerialNumber %2.2x\n", d->iSerialNumber);
+ serial_printf("\tbNumConfigurations %2.2x\n", d->bNumConfigurations);
+}
+
+#else
+
+/* stubs */
+#define print_device_descriptor(d)
+
+#endif /* DEBUG */
#endif
diff --git a/include/usbdevice.h b/include/usbdevice.h
index 206dbbc864..41716364b3 100644
--- a/include/usbdevice.h
+++ b/include/usbdevice.h
@@ -663,4 +663,107 @@ int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint);
void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad);
void usbd_tx_complete (struct usb_endpoint_instance *endpoint);
+/* These are macros used in debugging */
+#ifdef DEBUG
+static inline void print_urb(struct urb *u)
+{
+ serial_printf("urb %p\n", (u));
+ serial_printf("\tendpoint %p\n", u->endpoint);
+ serial_printf("\tdevice %p\n", u->device);
+ serial_printf("\tbuffer %p\n", u->buffer);
+ serial_printf("\tbuffer_length %d\n", u->buffer_length);
+ serial_printf("\tactual_length %d\n", u->actual_length);
+ serial_printf("\tstatus %d\n", u->status);
+ serial_printf("\tdata %d\n", u->data);
+}
+
+static inline void print_usb_device_request(struct usb_device_request *r)
+{
+ serial_printf("usb request\n");
+ serial_printf("\tbmRequestType 0x%2.2x\n", r->bmRequestType);
+ if ((r->bmRequestType & USB_REQ_DIRECTION_MASK) == 0)
+ serial_printf("\t\tDirection : To device\n");
+ else
+ serial_printf("\t\tDirection : To host\n");
+ if ((r->bmRequestType & USB_TYPE_STANDARD) == USB_TYPE_STANDARD)
+ serial_printf("\t\tType : Standard\n");
+ if ((r->bmRequestType & USB_TYPE_CLASS) == USB_TYPE_CLASS)
+ serial_printf("\t\tType : Standard\n");
+ if ((r->bmRequestType & USB_TYPE_VENDOR) == USB_TYPE_VENDOR)
+ serial_printf("\t\tType : Standard\n");
+ if ((r->bmRequestType & USB_TYPE_RESERVED) == USB_TYPE_RESERVED)
+ serial_printf("\t\tType : Standard\n");
+ if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
+ USB_REQ_RECIPIENT_DEVICE)
+ serial_printf("\t\tRecipient : Device\n");
+ if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
+ USB_REQ_RECIPIENT_INTERFACE)
+ serial_printf("\t\tRecipient : Interface\n");
+ if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
+ USB_REQ_RECIPIENT_ENDPOINT)
+ serial_printf("\t\tRecipient : Endpoint\n");
+ if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
+ USB_REQ_RECIPIENT_OTHER)
+ serial_printf("\t\tRecipient : Other\n");
+ serial_printf("\tbRequest 0x%2.2x\n", r->bRequest);
+ if (r->bRequest == USB_REQ_GET_STATUS)
+ serial_printf("\t\tGET_STATUS\n");
+ else if (r->bRequest == USB_REQ_SET_ADDRESS)
+ serial_printf("\t\tSET_ADDRESS\n");
+ else if (r->bRequest == USB_REQ_SET_FEATURE)
+ serial_printf("\t\tSET_FEATURE\n");
+ else if (r->bRequest == USB_REQ_GET_DESCRIPTOR)
+ serial_printf("\t\tGET_DESCRIPTOR\n");
+ else if (r->bRequest == USB_REQ_SET_CONFIGURATION)
+ serial_printf("\t\tSET_CONFIGURATION\n");
+ else if (r->bRequest == USB_REQ_SET_INTERFACE)
+ serial_printf("\t\tUSB_REQ_SET_INTERFACE\n");
+ else
+ serial_printf("\tUNKNOWN %d\n", r->bRequest);
+ serial_printf("\twValue 0x%4.4x\n", r->wValue);
+ if (r->bRequest == USB_REQ_GET_DESCRIPTOR) {
+ switch (r->wValue >> 8) {
+ case USB_DESCRIPTOR_TYPE_DEVICE:
+ serial_printf("\tDEVICE\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_CONFIGURATION:
+ serial_printf("\tCONFIGURATION\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_STRING:
+ serial_printf("\tSTRING\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_INTERFACE:
+ serial_printf("\tINTERFACE\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_ENDPOINT:
+ serial_printf("\tENDPOINT\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
+ serial_printf("\tDEVICE_QUALIFIER\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_OTHER_SPEED_CONFIGURATION:
+ serial_printf("\tOTHER_SPEED_CONFIGURATION\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_INTERFACE_POWER:
+ serial_printf("\tINTERFACE_POWER\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_HID:
+ serial_printf("\tHID\n");
+ break;
+ case USB_DESCRIPTOR_TYPE_REPORT:
+ serial_printf("\tREPORT\n");
+ break;
+ default:
+ serial_printf("\tUNKNOWN TYPE\n");
+ break;
+ }
+ }
+ serial_printf("\twIndex 0x%4.4x\n", r->wIndex);
+ serial_printf("\twLength 0x%4.4x\n", r->wLength);
+}
+#else
+/* stubs */
+#define print_urb(u)
+#define print_usb_device_request(r)
+#endif /* DEBUG */
#endif