diff options
99 files changed, 1242 insertions, 360 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 143f31bbcf..6e6affafaa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -697,9 +697,6 @@ Matthias Kaehlcke <matthias@kaehlcke.net> edb9315 ARM920T (EP9315) edb9315a ARM920T (EP9315) -Konstantin Kletschke <kletschke@synertronixx.de> - scb9328 ARM920T - Nishant Kamat <nskamat@ti.com> omap1610h2 ARM926EJS @@ -714,6 +711,9 @@ Chander Kashyap <k.chander@samsung.com> SMDKV310 ARM ARMV7 (S5PC210 SoC) +Torsten Koschorrek <koschorrek@synertronixx.de> + scb9328 ARM920T (i.MXL) + Frederik Kriewitz <frederik@kriewitz.eu> devkit8000 ARM ARMV7 (OMAP3530 SoC) @@ -904,6 +904,7 @@ Lei Wen <leiwen@marvell.com> Matthias Weisser <weisserm@arcor.de> jadecpu ARM926EJS (MB86R01 SoC) + zmx25 ARM926EJS (imx25 SoC) Richard Woodruff <r-woodruff2@ti.com> @@ -442,6 +442,16 @@ The following options need to be configured: crash. This is needed for buggy hardware (uc101) where no pull down resistor is connected to the signal IDE5V_DD7. + CONFIG_MACH_TYPE [relevant for ARM only][mandatory] + + This setting is mandatory for all boards that have only one + machine type and must be used to specify the machine type + number as it appears in the ARM machine registry + (see http://www.arm.linux.org.uk/developer/machines/). + Only boards that have multiple machine types supported + in a single configuration file and the machine type is + runtime discoverable, do not have to use this setting. + - vxWorks boot parameters: bootvx constructs a valid bootline using the following diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c index 4ebf38d765..248431b9bc 100644 --- a/arch/arm/cpu/arm1136/mx31/generic.c +++ b/arch/arm/cpu/arm1136/mx31/generic.c @@ -23,6 +23,7 @@ #include <common.h> #include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> #include <asm/io.h> static u32 mx31_decode_pll(u32 reg, u32 infreq) @@ -60,7 +61,7 @@ static u32 mx31_get_mcu_main_clk(void) return mx31_get_mpl_dpdgck_clk(); } -u32 mx31_get_ipg_clk(void) +static u32 mx31_get_ipg_clk(void) { u32 freq = mx31_get_mcu_main_clk(); u32 pdr0 = __REG(CCM_PDR0); @@ -78,6 +79,24 @@ void mx31_dump_clocks(void) printf("ipg clock : %dHz\n", mx31_get_ipg_clk()); } +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return mx31_get_mcu_main_clk(); + case MXC_IPG_CLK: + case MXC_CSPI_CLK: + case MXC_UART_CLK: + return mx31_get_ipg_clk(); + } + return -1; +} + +u32 imx_get_uartclk(void) +{ + return mxc_get_clock(MXC_UART_CLK); +} + void mx31_gpio_mux(unsigned long mode) { unsigned long reg, shift, tmp; diff --git a/arch/arm/cpu/arm1136/mx35/Makefile b/arch/arm/cpu/arm1136/mx35/Makefile index 20f36e3e0e..284cdc50d1 100644 --- a/arch/arm/cpu/arm1136/mx35/Makefile +++ b/arch/arm/cpu/arm1136/mx35/Makefile @@ -50,14 +50,3 @@ include $(SRCTREE)/rules.mk sinclude $(obj).depend ######################################################################### - -$(TOPDIR)/include/asm/arch/asm-offsets.h: $(TOPDIR)/include/autoconf.mk.dep \ - ./asm-offsets.s - @echo Generating $@ - $(TOPDIR)/tools/scripts/make-asm-offsets ./asm-offsets.s $@ - -asm-offsets.s: $(TOPDIR)/include/autoconf.mk.dep \ - ./asm-offsets.c - $(CC) -DDO_DEPS_ONLY \ - $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \ - -o $@ ./asm-offsets.c -c -S diff --git a/arch/arm/cpu/arm926ejs/mx25/Makefile b/arch/arm/cpu/arm926ejs/mx25/Makefile index 38d7f03ab2..9219c062b0 100644 --- a/arch/arm/cpu/arm926ejs/mx25/Makefile +++ b/arch/arm/cpu/arm926ejs/mx25/Makefile @@ -24,18 +24,18 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = generic.o timer.o -MX27OBJS = reset.o +COBJS = generic.o timer.o reset.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -SRCS += $(addprefix $(SRCTREE)/arch/arm/cpu/arm926ejs/mx27/,$(MX27OBJS:.o=.c)) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(MX27OBJS)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +$(OBJS) : $(TOPDIR)/include/asm/arch/asm-offsets.h + ######################################################################### # defines $(obj).depend target diff --git a/arch/arm/cpu/arm926ejs/mx25/asm-offsets.c b/arch/arm/cpu/arm926ejs/mx25/asm-offsets.c new file mode 100644 index 0000000000..ba8dfd4228 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx25/asm-offsets.c @@ -0,0 +1,60 @@ +/* + * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c + * + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> + +#include <linux/kbuild.h> + +int main(void) +{ + /* Clock Control Module */ + DEFINE(CCM_CCTL, offsetof(struct ccm_regs, cctl)); + DEFINE(CCM_CGCR0, offsetof(struct ccm_regs, cgr0)); + DEFINE(CCM_CGCR1, offsetof(struct ccm_regs, cgr1)); + DEFINE(CCM_CGCR2, offsetof(struct ccm_regs, cgr2)); + DEFINE(CCM_PCDR2, offsetof(struct ccm_regs, pcdr[2])); + DEFINE(CCM_MCR, offsetof(struct ccm_regs, mcr)); + + /* Enhanced SDRAM Controller */ + DEFINE(ESDRAMC_ESDCTL0, offsetof(struct esdramc_regs, ctl0)); + DEFINE(ESDRAMC_ESDCFG0, offsetof(struct esdramc_regs, cfg0)); + DEFINE(ESDRAMC_ESDMISC, offsetof(struct esdramc_regs, misc)); + + /* Multi-Layer AHB Crossbar Switch */ + DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0)); + DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0)); + DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1)); + DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1)); + DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2)); + DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2)); + DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3)); + DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3)); + DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4)); + DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4)); + DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0)); + DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1)); + DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2)); + DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3)); + DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4)); + + /* AHB <-> IP-Bus Interface */ + DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7)); + DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15)); + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/mx25/timer.c b/arch/arm/cpu/arm926ejs/mx25/timer.c index 14f0c2dc73..7c8a71b9d3 100644 --- a/arch/arm/cpu/arm926ejs/mx25/timer.c +++ b/arch/arm/cpu/arm926ejs/mx25/timer.c @@ -187,3 +187,15 @@ void __udelay (unsigned long usec) while (get_ticks() < tmp) /* loop till event */ /*NOP*/; } + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + + tbclk = CONFIG_MX25_CLK32; + return tbclk; +} diff --git a/arch/arm/cpu/arm926ejs/mx27/Makefile b/arch/arm/cpu/arm926ejs/mx27/Makefile index 0e112b34f4..7ac1a21406 100644 --- a/arch/arm/cpu/arm926ejs/mx27/Makefile +++ b/arch/arm/cpu/arm926ejs/mx27/Makefile @@ -34,6 +34,8 @@ all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +$(OBJS) : $(TOPDIR)/include/asm/arch/asm-offsets.h + ######################################################################### # defines $(obj).depend target diff --git a/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c b/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c new file mode 100644 index 0000000000..f3a8d7bd69 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c @@ -0,0 +1,45 @@ +/* + * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c + * + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> + +#include <linux/kbuild.h> + +int main(void) +{ + DEFINE(AIPI1_PSR0, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr0)); + DEFINE(AIPI1_PSR1, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr1)); + DEFINE(AIPI2_PSR0, IMX_AIPI2_BASE + offsetof(struct aipi_regs, psr0)); + DEFINE(AIPI2_PSR1, IMX_AIPI2_BASE + offsetof(struct aipi_regs, psr1)); + + DEFINE(CSCR, IMX_PLL_BASE + offsetof(struct pll_regs, cscr)); + DEFINE(MPCTL0, IMX_PLL_BASE + offsetof(struct pll_regs, mpctl0)); + DEFINE(SPCTL0, IMX_PLL_BASE + offsetof(struct pll_regs, spctl0)); + DEFINE(PCDR0, IMX_PLL_BASE + offsetof(struct pll_regs, pcdr0)); + DEFINE(PCDR1, IMX_PLL_BASE + offsetof(struct pll_regs, pcdr1)); + DEFINE(PCCR0, IMX_PLL_BASE + offsetof(struct pll_regs, pccr0)); + DEFINE(PCCR1, IMX_PLL_BASE + offsetof(struct pll_regs, pccr1)); + + DEFINE(ESDCTL0_ROF, offsetof(struct esdramc_regs, esdctl0)); + DEFINE(ESDCFG0_ROF, offsetof(struct esdramc_regs, esdcfg0)); + DEFINE(ESDCTL1_ROF, offsetof(struct esdramc_regs, esdctl1)); + DEFINE(ESDCFG1_ROF, offsetof(struct esdramc_regs, esdcfg1)); + DEFINE(ESDMISC_ROF, offsetof(struct esdramc_regs, esdmisc)); + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c index 27642bfe7d..222a8e95ea 100644 --- a/arch/arm/cpu/arm926ejs/mx27/generic.c +++ b/arch/arm/cpu/arm926ejs/mx27/generic.c @@ -271,7 +271,7 @@ void imx_gpio_mode(int gpio_mode) } #ifdef CONFIG_MXC_UART -void mx27_uart_init_pins(void) +void mx27_uart1_init_pins(void) { int i; unsigned int mode[] = { diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c index 3e1ff7d8ea..5cc31a99f1 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/dram.c +++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c @@ -53,7 +53,7 @@ int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ gd->ram_size = get_ram_size( - (volatile long *) orion5x_sdram_bar(0), + (long *) orion5x_sdram_bar(0), CONFIG_MAX_RAM_BANK_SIZE); return 0; } @@ -65,7 +65,7 @@ void dram_init_banksize (void) for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { gd->bd->bi_dram[i].start = orion5x_sdram_bar(i); gd->bd->bi_dram[i].size = get_ram_size( - (volatile long *) (gd->bd->bi_dram[i].start), + (long *) (gd->bd->bi_dram[i].start), CONFIG_MAX_RAM_BANK_SIZE); } } diff --git a/arch/arm/cpu/armv7/mx5/Makefile b/arch/arm/cpu/armv7/mx5/Makefile index e8be9c9fab..6e13cc3e84 100644 --- a/arch/arm/cpu/armv7/mx5/Makefile +++ b/arch/arm/cpu/armv7/mx5/Makefile @@ -45,4 +45,6 @@ include $(SRCTREE)/rules.mk sinclude $(obj).depend +lowlevel_init.o : $(TOPDIR)/include/asm/arch/asm-offsets.h + ######################################################################### diff --git a/arch/arm/cpu/armv7/mx5/asm-offsets.c b/arch/arm/cpu/armv7/mx5/asm-offsets.c new file mode 100644 index 0000000000..f97249899d --- /dev/null +++ b/arch/arm/cpu/armv7/mx5/asm-offsets.c @@ -0,0 +1,76 @@ +/* + * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c + * + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> + +#include <linux/kbuild.h> + +int main(void) +{ + + /* Round up to make sure size gives nice stack alignment */ + DEFINE(CLKCTL_CCMR, offsetof(struct clkctl, ccr)); + DEFINE(CLKCTL_CCDR, offsetof(struct clkctl, ccdr)); + DEFINE(CLKCTL_CSR, offsetof(struct clkctl, csr)); + DEFINE(CLKCTL_CCSR, offsetof(struct clkctl, ccsr)); + DEFINE(CLKCTL_CACRR, offsetof(struct clkctl, cacrr)); + DEFINE(CLKCTL_CBCDR, offsetof(struct clkctl, cbcdr)); + DEFINE(CLKCTL_CBCMR, offsetof(struct clkctl, cbcmr)); + DEFINE(CLKCTL_CSCMR1, offsetof(struct clkctl, cscmr1)); + DEFINE(CLKCTL_CSCMR2, offsetof(struct clkctl, cscmr2)); + DEFINE(CLKCTL_CSCDR1, offsetof(struct clkctl, cscdr1)); + DEFINE(CLKCTL_CS1CDR, offsetof(struct clkctl, cs1cdr)); + DEFINE(CLKCTL_CS2CDR, offsetof(struct clkctl, cs2cdr)); + DEFINE(CLKCTL_CDCDR, offsetof(struct clkctl, cdcdr)); + DEFINE(CLKCTL_CHSCCDR, offsetof(struct clkctl, chsccdr)); + DEFINE(CLKCTL_CSCDR2, offsetof(struct clkctl, cscdr2)); + DEFINE(CLKCTL_CSCDR3, offsetof(struct clkctl, cscdr3)); + DEFINE(CLKCTL_CSCDR4, offsetof(struct clkctl, cscdr4)); + DEFINE(CLKCTL_CWDR, offsetof(struct clkctl, cwdr)); + DEFINE(CLKCTL_CDHIPR, offsetof(struct clkctl, cdhipr)); + DEFINE(CLKCTL_CDCR, offsetof(struct clkctl, cdcr)); + DEFINE(CLKCTL_CTOR, offsetof(struct clkctl, ctor)); + DEFINE(CLKCTL_CLPCR, offsetof(struct clkctl, clpcr)); + DEFINE(CLKCTL_CISR, offsetof(struct clkctl, cisr)); + DEFINE(CLKCTL_CIMR, offsetof(struct clkctl, cimr)); + DEFINE(CLKCTL_CCOSR, offsetof(struct clkctl, ccosr)); + DEFINE(CLKCTL_CGPR, offsetof(struct clkctl, cgpr)); + DEFINE(CLKCTL_CCGR0, offsetof(struct clkctl, ccgr0)); + DEFINE(CLKCTL_CCGR1, offsetof(struct clkctl, ccgr1)); + DEFINE(CLKCTL_CCGR2, offsetof(struct clkctl, ccgr2)); + DEFINE(CLKCTL_CCGR3, offsetof(struct clkctl, ccgr3)); + DEFINE(CLKCTL_CCGR4, offsetof(struct clkctl, ccgr4)); + DEFINE(CLKCTL_CCGR5, offsetof(struct clkctl, ccgr5)); + DEFINE(CLKCTL_CCGR6, offsetof(struct clkctl, ccgr6)); + DEFINE(CLKCTL_CMEOR, offsetof(struct clkctl, cmeor)); +#if defined(CONFIG_MX53) + DEFINE(CLKCTL_CCGR7, offsetof(struct clkctl, ccgr7)); +#endif + + /* DPLL */ + DEFINE(PLL_DP_CTL, offsetof(struct dpll, dp_ctl)); + DEFINE(PLL_DP_CONFIG, offsetof(struct dpll, dp_config)); + DEFINE(PLL_DP_OP, offsetof(struct dpll, dp_op)); + DEFINE(PLL_DP_MFD, offsetof(struct dpll, dp_mfd)); + DEFINE(PLL_DP_MFN, offsetof(struct dpll, dp_mfn)); + DEFINE(PLL_DP_HFS_OP, offsetof(struct dpll, dp_hfs_op)); + DEFINE(PLL_DP_HFS_MFD, offsetof(struct dpll, dp_hfs_mfd)); + DEFINE(PLL_DP_HFS_MFN, offsetof(struct dpll, dp_hfs_mfn)); + + return 0; +} diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 96ebfe2345..94de9f1d61 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -39,10 +39,14 @@ orr r0, r0, #(1 << 23) /* disable write allocate combine */ orr r0, r0, #(1 << 22) /* disable write allocate */ - cmp r3, #0x10 /* r3 contains the silicon rev */ +#if defined(CONFIG_MX51) + ldr r1, =0x0 + ldr r3, [r1, #ROM_SI_REV] + cmp r3, #0x10 /* disable write combine for TO 2 and lower revs */ orrls r0, r0, #(1 << 25) +#endif mcr 15, 1, r0, c9, c0, 2 .endm /* init_l2cc */ diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 0e698b624b..eee648bdc4 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -283,6 +283,7 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /************************************************************************* * * CPU_init_critical registers @@ -327,6 +328,7 @@ cpu_init_crit: bl lowlevel_init @ go setup pll,mux,memory mov lr, ip @ restore link mov pc, lr @ back to my caller +#endif /* ************************************************************************* * diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index 55ad115a76..2ccb445975 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -86,8 +86,8 @@ struct esdramc_regs { /* GPIO registers */ struct gpio_regs { - u32 dr; /* data */ - u32 dir; /* direction */ + u32 gpio_dr; /* data */ + u32 gpio_dir; /* direction */ u32 psr; /* pad satus */ u32 icr1; /* interrupt config 1 */ u32 icr2; /* interrupt config 2 */ @@ -141,6 +141,45 @@ struct fuse_bank0_regs { u32 mac_addr[6]; }; +/* Multi-Layer AHB Crossbar Switch (MAX) registers */ +struct max_regs { + u32 mpr0; + u32 pad00[3]; + u32 sgpcr0; + u32 pad01[59]; + u32 mpr1; + u32 pad02[3]; + u32 sgpcr1; + u32 pad03[59]; + u32 mpr2; + u32 pad04[3]; + u32 sgpcr2; + u32 pad05[59]; + u32 mpr3; + u32 pad06[3]; + u32 sgpcr3; + u32 pad07[59]; + u32 mpr4; + u32 pad08[3]; + u32 sgpcr4; + u32 pad09[251]; + u32 mgpcr0; + u32 pad10[63]; + u32 mgpcr1; + u32 pad11[63]; + u32 mgpcr2; + u32 pad12[63]; + u32 mgpcr3; + u32 pad13[63]; + u32 mgpcr4; +}; + +/* AHB <-> IP-Bus Interface (AIPS) */ +struct aips_regs { + u32 mpr_0_7; + u32 mpr_8_15; +}; + #endif /* AIPS 1 */ @@ -318,4 +357,10 @@ struct fuse_bank0_regs { #define WSR_UNLOCK1 0x5555 #define WSR_UNLOCK2 0xAAAA +/* Names used in GPIO driver */ +#define GPIO1_BASE_ADDR IMX_GPIO1_BASE +#define GPIO2_BASE_ADDR IMX_GPIO2_BASE +#define GPIO3_BASE_ADDR IMX_GPIO3_BASE +#define GPIO4_BASE_ADDR IMX_GPIO4_BASE + #endif /* _IMX_REGS_H */ diff --git a/arch/arm/include/asm/arch-mx25/macro.h b/arch/arm/include/asm/arch-mx25/macro.h new file mode 100644 index 0000000000..276c71ccd6 --- /dev/null +++ b/arch/arm/include/asm/arch-mx25/macro.h @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2011 + * Matthias Weisser <weisserm@arcor.de> + * + * (C) Copyright 2009 DENX Software Engineering + * Author: John Rigby <jrigby@gmail.com> + * + * Common asm macros for imx25 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_MACRO_H__ +#define __ASM_ARM_ARCH_MACRO_H__ +#ifdef __ASSEMBLY__ + +#include <asm/arch/imx-regs.h> +#include <asm/arch/asm-offsets.h> + +.macro init_aips + write32 IMX_AIPS1_BASE + AIPS_MPR_0_7, 0x77777777 + write32 IMX_AIPS1_BASE + AIPS_MPR_8_15, 0x77777777 + write32 IMX_AIPS2_BASE + AIPS_MPR_0_7, 0x77777777 + write32 IMX_AIPS2_BASE + AIPS_MPR_8_15, 0x77777777 +.endm + +.macro init_max + write32 IMX_MAX_BASE + MAX_MPR0, 0x43210 + write32 IMX_MAX_BASE + MAX_MPR1, 0x43210 + write32 IMX_MAX_BASE + MAX_MPR2, 0x43210 + write32 IMX_MAX_BASE + MAX_MPR3, 0x43210 + write32 IMX_MAX_BASE + MAX_MPR4, 0x43210 + + write32 IMX_MAX_BASE + MAX_SGPCR0, 0x10 + write32 IMX_MAX_BASE + MAX_SGPCR1, 0x10 + write32 IMX_MAX_BASE + MAX_SGPCR2, 0x10 + write32 IMX_MAX_BASE + MAX_SGPCR3, 0x10 + write32 IMX_MAX_BASE + MAX_SGPCR4, 0x10 + + write32 IMX_MAX_BASE + MAX_MGPCR0, 0x0 + write32 IMX_MAX_BASE + MAX_MGPCR1, 0x0 + write32 IMX_MAX_BASE + MAX_MGPCR2, 0x0 + write32 IMX_MAX_BASE + MAX_MGPCR3, 0x0 + write32 IMX_MAX_BASE + MAX_MGPCR4, 0x0 +.endm + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARM_ARCH_MACRO_H__ */ diff --git a/arch/arm/include/asm/arch-mx27/asm-offsets.h b/arch/arm/include/asm/arch-mx27/asm-offsets.h deleted file mode 100644 index 497afe5745..0000000000 --- a/arch/arm/include/asm/arch-mx27/asm-offsets.h +++ /dev/null @@ -1,16 +0,0 @@ -#define AIPI1_PSR0 0x10000000 -#define AIPI1_PSR1 0x10000004 -#define AIPI2_PSR0 0x10020000 -#define AIPI2_PSR1 0x10020004 -#define CSCR 0x10027000 -#define MPCTL0 0x10027004 -#define SPCTL0 0x1002700c -#define PCDR0 0x10027018 -#define PCDR1 0x1002701c -#define PCCR0 0x10027020 -#define PCCR1 0x10027024 -#define ESDCTL0_ROF 0x00 -#define ESDCFG0_ROF 0x04 -#define ESDCTL1_ROF 0x08 -#define ESDCFG1_ROF 0x0C -#define ESDMISC_ROF 0x10 diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index 8f40aa728c..b4b2fe61a6 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -29,7 +29,7 @@ extern void imx_gpio_mode (int gpio_mode); #ifdef CONFIG_MXC_UART -extern void mx27_uart_init_pins(void); +extern void mx27_uart1_init_pins(void); #endif /* CONFIG_MXC_UART */ #ifdef CONFIG_FEC_MXC diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h index 9f7ae8036e..fb035c4993 100644 --- a/arch/arm/include/asm/arch-mx31/clock.h +++ b/arch/arm/include/asm/arch-mx31/clock.h @@ -24,8 +24,15 @@ #ifndef __ASM_ARCH_CLOCK_H #define __ASM_ARCH_CLOCK_H -extern u32 mx31_get_ipg_clk(void); -#define imx_get_uartclk mx31_get_ipg_clk +enum mxc_clock { + MXC_ARM_CLK, + MXC_IPG_CLK, + MXC_CSPI_CLK, + MXC_UART_CLK, +}; + +unsigned int mxc_get_clock(enum mxc_clock clk); +extern u32 imx_get_uartclk(); extern void mx31_gpio_mux(unsigned long mode); extern void mx31_set_pad(enum iomux_pins pin, u32 config); diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 306f966139..3c8d6076d2 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -746,7 +746,7 @@ enum iomux_pins { #define IRAM_SIZE (16 * 1024) #define MX31_AIPS1_BASE_ADDR 0x43f00000 -#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000) /* USB portsc */ /* values for portsc field */ diff --git a/arch/arm/include/asm/arch-mx5/asm-offsets.h b/arch/arm/include/asm/arch-mx5/asm-offsets.h deleted file mode 100644 index 793f69c5e6..0000000000 --- a/arch/arm/include/asm/arch-mx5/asm-offsets.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * needed for arch/arm/cpu/armv7/mx51/lowlevel_init.S - * - * These should be auto-generated - */ -/* CCM */ -#define CLKCTL_CCR 0x00 -#define CLKCTL_CCDR 0x04 -#define CLKCTL_CSR 0x08 -#define CLKCTL_CCSR 0x0C -#define CLKCTL_CACRR 0x10 -#define CLKCTL_CBCDR 0x14 -#define CLKCTL_CBCMR 0x18 -#define CLKCTL_CSCMR1 0x1C -#define CLKCTL_CSCMR2 0x20 -#define CLKCTL_CSCDR1 0x24 -#define CLKCTL_CS1CDR 0x28 -#define CLKCTL_CS2CDR 0x2C -#define CLKCTL_CDCDR 0x30 -#define CLKCTL_CHSCCDR 0x34 -#define CLKCTL_CSCDR2 0x38 -#define CLKCTL_CSCDR3 0x3C -#define CLKCTL_CSCDR4 0x40 -#define CLKCTL_CWDR 0x44 -#define CLKCTL_CDHIPR 0x48 -#define CLKCTL_CDCR 0x4C -#define CLKCTL_CTOR 0x50 -#define CLKCTL_CLPCR 0x54 -#define CLKCTL_CISR 0x58 -#define CLKCTL_CIMR 0x5C -#define CLKCTL_CCOSR 0x60 -#define CLKCTL_CGPR 0x64 -#define CLKCTL_CCGR0 0x68 -#define CLKCTL_CCGR1 0x6C -#define CLKCTL_CCGR2 0x70 -#define CLKCTL_CCGR3 0x74 -#define CLKCTL_CCGR4 0x78 -#define CLKCTL_CCGR5 0x7C -#define CLKCTL_CCGR6 0x80 -#if defined(CONFIG_MX53) -#define CLKCTL_CCGR7 0x84 -#define CLKCTL_CMEOR 0x88 -#elif defined(CONFIG_MX51) -#define CLKCTL_CMEOR 0x84 -#endif - -/* DPLL */ -#define PLL_DP_CTL 0x00 -#define PLL_DP_CONFIG 0x04 -#define PLL_DP_OP 0x08 -#define PLL_DP_MFD 0x0C -#define PLL_DP_MFN 0x10 -#define PLL_DP_HFS_OP 0x1C -#define PLL_DP_HFS_MFD 0x20 -#define PLL_DP_HFS_MFN 0x24 diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 9589a62a12..e83ca29006 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -317,9 +317,27 @@ struct clkctl { u32 ccgr4; u32 ccgr5; u32 ccgr6; +#if defined(CONFIG_MX53) + u32 ccgr7; +#endif u32 cmeor; }; +/* DPLL registers */ +struct dpll { + u32 dp_ctl; + u32 dp_config; + u32 dp_op; + u32 dp_mfd; + u32 dp_mfn; + u32 dp_mfn_minus; + u32 dp_mfn_plus; + u32 dp_hfs_op; + u32 dp_hfs_mfd; + u32 dp_hfs_mfn; + u32 dp_mfn_togc; + u32 dp_destat; +}; /* WEIM registers */ struct weim { u32 cs0gcr1; diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index 270f163eee..879e20e024 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -106,6 +106,11 @@ static inline int test_bit(int nr, const void * addr) return ((unsigned char *) addr)[nr >> 3] & (1U << (nr & 7)); } +static inline int __ilog2(unsigned int x) +{ + return generic_fls(x) - 1; +} + /* * ffz = Find First Zero in word. Undefined if no zero exists, * so code should check against ~0UL first.. diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index fc52a26b79..6bbedf45dd 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -281,6 +281,10 @@ void board_init_f (ulong bootflag) gd->mon_len = _bss_end_ofs; +#ifdef CONFIG_MACH_TYPE + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ +#endif + for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { if ((*init_fnc_ptr)() != 0) { hang (); diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c index a918b04ddd..856d798a31 100644 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ b/board/BuS/eb_cpux9k2/cpux9k2.c @@ -141,7 +141,7 @@ void reset_phy(void) int dram_init(void) { - gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c index cdbbfd01c2..cf7d7f6a64 100644 --- a/board/armadillo/flash.c +++ b/board/armadillo/flash.c @@ -162,6 +162,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int rc = ERR_OK; unsigned long base; unsigned long addr; + ulong start; if ((info->flash_id & FLASH_VENDMASK) != (FUJ_MANUFACT & FLASH_VENDMASK)) { @@ -192,7 +193,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { /* ARM simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ @@ -232,6 +233,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) { int flag; unsigned long base; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -250,7 +252,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) flag = disable_interrupts (); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); base = dest & 0xF0000000; FL_WORD (base + (0x555 << 1)) = 0xAA; diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c index 902c3c41c0..be2274362c 100644 --- a/board/atmel/at91rm9200dk/flash.c +++ b/board/atmel/at91rm9200dk/flash.c @@ -285,6 +285,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int iflag, cflag, prot, sect; int rc = ERR_OK; int chip1; + ulong start; /* first look for protection bits */ @@ -325,7 +326,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ volatile u16 *addr = (volatile u16 *) (info->start[sect]); @@ -345,7 +346,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) result = *addr; /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { MEM_FLASH_ADDR1 = CMD_READ_ARRAY; chip1 = TMO; break; @@ -400,6 +401,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) int rc = ERR_OK; int cflag, iflag; int chip1; + ulong start; /* * Check if Flash is (sufficiently) erased @@ -425,7 +427,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait until flash is ready */ chip1 = 0; @@ -433,7 +435,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) result = *addr; /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { chip1 = ERR | TMO; break; } diff --git a/board/atmel/at91rm9200ek/at91rm9200ek.c b/board/atmel/at91rm9200ek/at91rm9200ek.c index ec0dabaaaa..2b4d845629 100644 --- a/board/atmel/at91rm9200ek/at91rm9200ek.c +++ b/board/atmel/at91rm9200ek/at91rm9200ek.c @@ -64,7 +64,7 @@ int board_early_init_f(void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c index a4b201e011..e1e7807bc1 100644 --- a/board/cerf250/flash.c +++ b/board/cerf250/flash.c @@ -221,7 +221,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -254,9 +254,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -269,14 +266,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -393,6 +390,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -406,11 +404,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c index 2e6687246a..d6fd5195d3 100644 --- a/board/cm4008/flash.c +++ b/board/cm4008/flash.c @@ -209,6 +209,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int flag, prot, sect; ulong type; int rcode = 0; + ulong start; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { @@ -250,7 +251,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); addr = (volatile unsigned char *) (info->start[sect]); *addr = 0x50; /* clear status register */ @@ -258,7 +259,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0xD0; /* erase confirm */ while (((status = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = 0xB0; /* suspend erase */ @@ -370,6 +371,7 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data) volatile unsigned char *addr = (volatile unsigned char *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -384,11 +386,11 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = 0xFF; /* restore read mode */ return (1); } diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c index 2e6687246a..d6fd5195d3 100644 --- a/board/cm41xx/flash.c +++ b/board/cm41xx/flash.c @@ -209,6 +209,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int flag, prot, sect; ulong type; int rcode = 0; + ulong start; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { @@ -250,7 +251,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); addr = (volatile unsigned char *) (info->start[sect]); *addr = 0x50; /* clear status register */ @@ -258,7 +259,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0xD0; /* erase confirm */ while (((status = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = 0xB0; /* suspend erase */ @@ -370,6 +371,7 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data) volatile unsigned char *addr = (volatile unsigned char *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -384,11 +386,11 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = 0xFF; /* restore read mode */ return (1); } diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c index d832e6209f..d10faab52a 100644 --- a/board/cmc_pu2/flash.c +++ b/board/cmc_pu2/flash.c @@ -264,7 +264,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { vu_short *addr = (vu_short *)(info->start[0]); int flag, prot, sect, ssect, l_sect; - ulong now, last; + ulong now, last, start; debug ("flash_erase: first: %d last: %d\n", s_first, s_last); @@ -335,11 +335,11 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) if (l_sect < 0) goto DONE; - reset_timer_masked (); + start = get_timer(0); last = 0; addr = (vu_short *)(info->start[l_sect]); while ((addr[0] & 0x0080) != 0x0080) { - if ((now = get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) { + if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); return 1; } @@ -434,6 +434,7 @@ static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data) { int flag; vu_short *base; /* first address in flash bank */ + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*dest & data) != data) { @@ -455,11 +456,11 @@ static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data) if (flag) enable_interrupts(); - reset_timer_masked (); + start = get_timer(0); /* data polling for D7 */ while ((*dest & 0x0080) != (data & 0x0080)) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = 0x00F0; /* reset bank */ return (1); } diff --git a/board/cradle/flash.c b/board/cradle/flash.c index b5635fbc26..160178207d 100644 --- a/board/cradle/flash.c +++ b/board/cradle/flash.c @@ -136,6 +136,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -173,7 +174,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_short *addr = (vu_short *) (info->start[sect]); @@ -182,7 +183,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0xD0; /* erase confirm */ while ((*addr & 0x80) != 0x80) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0xB0; /* suspend erase */ *addr = 0xFF; /* reset to read mode */ @@ -221,6 +222,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) vu_short *addr = (vu_short *) dest, val; int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -246,11 +248,11 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((val = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0xB0; diff --git a/board/csb226/flash.c b/board/csb226/flash.c index 02ded1c45a..e10347067c 100644 --- a/board/csb226/flash.c +++ b/board/csb226/flash.c @@ -141,6 +141,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -175,7 +176,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ u32 * volatile addr = (u32 * volatile)(info->start[sect]); @@ -189,7 +190,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) *addr = 0x00D000D0; /* erase confirm */ while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0x00B000B0; /* suspend erase*/ *addr = 0x00FF00FF; /* read mode */ rc = ERR_TIMOUT; @@ -221,6 +222,7 @@ static int write_long (flash_info_t *info, ulong dest, ulong data) u32 * volatile addr = (u32 * volatile)dest, val; int rc = ERR_OK; int flag; + ulong start; /* read array command - just for the case... */ *addr = 0x00FF00FF; @@ -247,11 +249,11 @@ static int write_long (flash_info_t *info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait while polling the status register */ while(((val = *addr) & 0x00800080) != 0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0x00B000B0; diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index b1238d505a..ec22627680 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -44,7 +44,7 @@ void hw_watchdog_reset(void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index 2bfdf23bed..6103339216 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -38,7 +38,7 @@ int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ gd->ram_size = get_ram_size( - (volatile void *)CONFIG_SYS_SDRAM_BASE, + (void *)CONFIG_SYS_SDRAM_BASE, CONFIG_MAX_RAM_BANK_SIZE); return 0; } diff --git a/board/dnp1110/flash.c b/board/dnp1110/flash.c index c81abc50fd..53f89ee7e6 100644 --- a/board/dnp1110/flash.c +++ b/board/dnp1110/flash.c @@ -212,7 +212,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -245,9 +245,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); @@ -260,14 +257,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); *addr = (FPW)0x00500050; /* clear status register */ *addr = (FPW)0x00200020; /* erase setup */ *addr = (FPW)0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW)0x00B000B0; /* suspend erase */ *addr = (FPW)0x00FF00FF; /* reset to read mode */ @@ -385,6 +382,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *)dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -398,11 +396,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (start = get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW)0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c index 16be532f14..4b3691808e 100644 --- a/board/efikamx/efikamx.c +++ b/board/efikamx/efikamx.c @@ -113,7 +113,7 @@ u32 get_board_rev(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/ep7312/flash.c b/board/ep7312/flash.c index 0c2b3aedc2..2ed9c9ad63 100644 --- a/board/ep7312/flash.c +++ b/board/ep7312/flash.c @@ -119,6 +119,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -156,7 +157,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_short *addr = (vu_short *) (info->start[sect]); @@ -165,7 +166,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0xD0; /* erase confirm */ while ((*addr & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0xB0; /* suspend erase */ *addr = 0xFF; /* reset to read mode */ rc = ERR_TIMOUT; @@ -203,6 +204,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) vu_short *addr = (vu_short *) dest, val; int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -228,11 +230,11 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((val = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0xB0; diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index 0959c5cdb9..402f19ff8b 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -174,7 +174,7 @@ int board_init(void) int dram_init(void) { - gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c index 5d05414841..f654f87b72 100644 --- a/board/eukrea/cpuat91/cpuat91.c +++ b/board/eukrea/cpuat91/cpuat91.c @@ -63,7 +63,7 @@ int board_early_init_f(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/freescale/mx31ads/mx31ads.c b/board/freescale/mx31ads/mx31ads.c index 9bf9c18fd8..7637c9281c 100644 --- a/board/freescale/mx31ads/mx31ads.c +++ b/board/freescale/mx31ads/mx31ads.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c index 08addd29e1..f6e190ac6b 100644 --- a/board/freescale/mx31pdk/mx31pdk.c +++ b/board/freescale/mx31pdk/mx31pdk.c @@ -42,7 +42,7 @@ void hw_watchdog_reset(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index e2d3d74a29..fd7342f112 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -53,7 +53,7 @@ u32 get_board_rev(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index b51d2097d1..134603a7cf 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -46,8 +46,8 @@ int dram_init(void) { u32 size1, size2; - size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); gd->ram_size = size1 + size2; diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index a89aa25b06..88095dc7ae 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -46,7 +46,7 @@ u32 get_board_rev(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index d032428bc4..18b388eeda 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -47,8 +47,8 @@ int dram_init(void) { u32 size1, size2; - size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); gd->ram_size = size1 + size2; diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index f3c433fa2c..21b5d14c02 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -44,8 +44,8 @@ int dram_init(void) { u32 size1, size2; - size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); gd->ram_size = size1 + size2; diff --git a/board/gcplus/flash.c b/board/gcplus/flash.c index 8511582bae..ab567e8fa7 100644 --- a/board/gcplus/flash.c +++ b/board/gcplus/flash.c @@ -225,7 +225,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -258,9 +258,6 @@ flash_erase(flash_info_t * info, int s_first, int s_last) printf("\n"); } - start = get_timer(0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); @@ -273,7 +270,7 @@ flash_erase(flash_info_t * info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ @@ -282,7 +279,7 @@ flash_erase(flash_info_t * info, int s_first, int s_last) while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -401,6 +398,7 @@ write_data(flash_info_t * info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -414,11 +412,11 @@ write_data(flash_info_t * info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/impa7/flash.c b/board/impa7/flash.c index d0c5880b33..6eae428a9d 100644 --- a/board/impa7/flash.c +++ b/board/impa7/flash.c @@ -128,6 +128,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -165,7 +166,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_long *addr = (vu_long *) (info->start[sect]); @@ -174,7 +175,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0x00D000D0; /* erase confirm */ while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0x00B000B0; /* suspend erase */ *addr = 0x00FF00FF; /* reset to read mode */ @@ -211,6 +212,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) ulong barf; int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -236,14 +238,14 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* read status register command */ *addr = 0x00700070; /* wait while polling the status register */ while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0x00B000B0; diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c index ca7d6e2133..773900e3c9 100644 --- a/board/imx31_phycore/imx31_phycore.c +++ b/board/imx31_phycore/imx31_phycore.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/innokom/flash.c b/board/innokom/flash.c index 8c95341b64..ed4b9872a2 100644 --- a/board/innokom/flash.c +++ b/board/innokom/flash.c @@ -182,6 +182,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -218,7 +219,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) PRINTK("\n"); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ u16 * volatile addr = (u16 * volatile)(info->start[sect]); @@ -235,7 +236,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) while ((*addr & 0x0080) != 0x0080) { PRINTK("."); - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0x00B0; /* suspend erase*/ *addr = 0x00FF; /* read mode */ rc = ERR_TIMOUT; @@ -279,6 +280,7 @@ static int write_word (flash_info_t *info, ulong dest, ushort data) volatile u16 *addr = (u16 *)dest, val; int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) return ERR_NOT_ERASED; @@ -302,11 +304,11 @@ static int write_word (flash_info_t *info, ulong dest, ushort data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait while polling the status register */ while(((val = *addr) & 0x80) != 0x80) { - if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; *addr = 0xB0; /* suspend program command */ goto outahere; diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index 269858c6ee..25b99e81b2 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -70,18 +70,18 @@ void tx25_fec_init(void) writel(0x0, &padctl->pad_d11); /* drop PHY power and assert reset (low) */ - val = readl(&gpio4->dr) & ~((1 << 7) | (1 << 9)); - writel(val, &gpio4->dr); - val = readl(&gpio4->dir) | (1 << 7) | (1 << 9); - writel(val, &gpio4->dir); + val = readl(&gpio4->gpio_dr) & ~((1 << 7) | (1 << 9)); + writel(val, &gpio4->gpio_dr); + val = readl(&gpio4->gpio_dir) | (1 << 7) | (1 << 9); + writel(val, &gpio4->gpio_dir); mdelay(5); debug("resetting phy\n"); /* turn on PHY power leaving reset asserted */ - val = readl(&gpio4->dr) | 1 << 9; - writel(val, &gpio4->dr); + val = readl(&gpio4->gpio_dr) | 1 << 9; + writel(val, &gpio4->gpio_dr); mdelay(10); @@ -111,19 +111,19 @@ void tx25_fec_init(void) /* * set each to 1 and make each an output */ - val = readl(&gpio3->dr) | (1 << 10) | (1 << 11) | (1 << 12); - writel(val, &gpio3->dr); - val = readl(&gpio3->dir) | (1 << 10) | (1 << 11) | (1 << 12); - writel(val, &gpio3->dir); + val = readl(&gpio3->gpio_dr) | (1 << 10) | (1 << 11) | (1 << 12); + writel(val, &gpio3->gpio_dr); + val = readl(&gpio3->gpio_dir) | (1 << 10) | (1 << 11) | (1 << 12); + writel(val, &gpio3->gpio_dir); mdelay(22); /* this value came from RedBoot */ /* * deassert PHY reset */ - val = readl(&gpio4->dr) | 1 << 7; - writel(val, &gpio4->dr); - writel(val, &gpio4->dr); + val = readl(&gpio4->gpio_dr) | 1 << 7; + writel(val, &gpio4->gpio_dr); + writel(val, &gpio4->gpio_dr); mdelay(5); @@ -160,7 +160,7 @@ int board_late_init(void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } @@ -168,11 +168,11 @@ int dram_init (void) void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); #if CONFIG_NR_DRAM_BANKS > 1 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((volatile void *)PHYS_SDRAM_2, + gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); #else diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 5da856fabc..a8f2b2317a 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -321,7 +321,7 @@ int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ /* Fix this */ - gd->ram_size = get_ram_size((volatile void *)kw_sdram_bar(0), + gd->ram_size = get_ram_size((void *)kw_sdram_bar(0), kw_sdram_bs(0)); return 0; } diff --git a/board/lart/flash.c b/board/lart/flash.c index 29a331eff7..408c88498e 100644 --- a/board/lart/flash.c +++ b/board/lart/flash.c @@ -250,6 +250,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) ulong result; int iflag, cflag, prot, sect; int rc = ERR_OK; + ulong start; /* first look for protection bits */ @@ -291,7 +292,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ @@ -305,7 +306,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) do { /* check timeout */ - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = PUZZLE_TO_FLASH(CMD_SUSPEND); result = BIT_TIMEOUT; @@ -354,6 +355,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) ulong result; int rc = ERR_OK; int cflag, iflag; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -377,13 +379,13 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = PUZZLE_TO_FLASH(CMD_SUSPEND); result = BIT_TIMEOUT; diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c index 6eb5cc2dd6..2b273acea5 100644 --- a/board/logicpd/imx27lite/imx27lite.c +++ b/board/logicpd/imx27lite/imx27lite.c @@ -38,7 +38,7 @@ int board_init (void) gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; #ifdef CONFIG_MXC_UART - mx27_uart_init_pins(); + mx27_uart1_init_pins(); #endif #ifdef CONFIG_FEC_MXC mx27_fec_init_pins(); @@ -67,7 +67,7 @@ int board_init (void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } @@ -75,11 +75,11 @@ int dram_init (void) void dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->bd->bi_dram[0].size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); #if CONFIG_NR_DRAM_BANKS > 1 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((volatile void *)PHYS_SDRAM_2, + gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); #endif } diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c index bf635c301d..09cc9c5b9c 100644 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ b/board/logicpd/imx31_litekit/imx31_litekit.c @@ -32,7 +32,7 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c index a3ba75b893..f5c07135dc 100644 --- a/board/lpd7a40x/flash.c +++ b/board/lpd7a40x/flash.c @@ -229,6 +229,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) ulong result, result1; int iflag, prot, sect; int rc = ERR_OK; + ulong start; #ifdef USE_920T_MMU int cflag; @@ -284,7 +285,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) sect, info->start[sect]); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_long *addr = (vu_long *) (info->start[sect]); @@ -297,7 +298,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_STATUS_RESET; result = BIT_TIMEOUT; break; @@ -357,6 +358,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) ulong result; int rc = ERR_OK; int iflag; + ulong start; #ifdef USE_920T_MMU int cflag; @@ -387,12 +389,12 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_SUSPEND; result = BIT_TIMEOUT; break; diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c index a4b201e011..1ea2893fd0 100644 --- a/board/lubbock/flash.c +++ b/board/lubbock/flash.c @@ -221,7 +221,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -254,9 +254,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -269,14 +266,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -393,6 +390,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -406,11 +404,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/modnet50/flash.c b/board/modnet50/flash.c index 4c3114328a..4834e21e62 100644 --- a/board/modnet50/flash.c +++ b/board/modnet50/flash.c @@ -291,6 +291,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, sect, setup_offset = 0; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) { printf ("- missing\n"); @@ -338,14 +339,14 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) (__u16) SECERASE_CMD; /* wait some time */ - reset_timer_masked (); - while (get_timer_masked () < 1000) { + start = get_timer(0); + while (get_timer(start) < 1000) { } /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); while (flash_check_erase_amd (info->start[sect])) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("timeout!\n"); /* OOPS: reach timeout, * try to reset chip @@ -411,6 +412,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) { int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*(__u16 *) (dest) & data) != data) @@ -446,10 +448,10 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) } /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); while (flash_check_write_amd (dest)) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { printf ("timeout! @ %08lX\n", dest); /* OOPS: reach timeout, * try to reset chip */ diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c index c11c0fe215..86b49fb60d 100644 --- a/board/mx1ads/mx1ads.c +++ b/board/mx1ads/mx1ads.c @@ -169,7 +169,7 @@ int board_late_init (void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c index 47f613c7fe..7331efa956 100644 --- a/board/mx1ads/syncflash.c +++ b/board/mx1ads/syncflash.c @@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + get_timer(0); SF_NvmodeErase(); SF_NvmodeWrite(); diff --git a/board/ns9750dev/flash.c b/board/ns9750dev/flash.c index 5b56b98393..185bc2d73a 100644 --- a/board/ns9750dev/flash.c +++ b/board/ns9750dev/flash.c @@ -261,7 +261,7 @@ void flash_unprotect_sectors (FPWV * addr) int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -294,10 +294,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -312,7 +308,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) flash_unprotect_sectors (addr); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050;/* clear status register */ *addr = (FPW) 0x00200020;/* erase setup */ @@ -321,7 +317,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); /* suspend erase */ @@ -441,6 +437,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -454,11 +451,11 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/pleb2/flash.c b/board/pleb2/flash.c index a8897dcffe..2406c5f4c0 100644 --- a/board/pleb2/flash.c +++ b/board/pleb2/flash.c @@ -472,7 +472,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) FPWV *addr; int flag, prot, sect; int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL; - ulong now, last; + ulong start, now, last; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -516,8 +516,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - reset_timer_masked (); - /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last && rcode == 0; sect++) { @@ -527,7 +525,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); - reset_timer_masked (); + start = get_timer(0); last = 0; addr = (FPWV *) (info->start[sect]); @@ -559,7 +557,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) { if ((now = - get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) { + get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); if (intel) { @@ -661,6 +659,7 @@ static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data) int flag; int res = 0; /* result, assume success */ FPWV *base; /* first address in flash bank */ + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*dest & data) != data) { @@ -683,12 +682,12 @@ static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data) if (flag) enable_interrupts (); - reset_timer_masked (); + start = get_timer(0); /* data polling for D7 */ while (res == 0 && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = (FPW) 0x00F000F0; /* reset bank */ res = 1; } @@ -711,6 +710,7 @@ static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data) { int flag; int res = 0; /* result, assume success */ + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*dest & data) != data) { @@ -730,10 +730,10 @@ static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data) if (flag) enable_interrupts (); - reset_timer_masked (); + start = get_timer(0); while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = (FPW) 0x00B000B0; /* Suspend program */ res = 1; } diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index e0f44ddd15..2c50fe8e6e 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -282,7 +282,7 @@ int board_eth_init(bd_t *bis) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; } diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index ec9f865915..8071600081 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -379,7 +379,7 @@ int board_init(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; } diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c index 79b7c9d2ee..fa69599e90 100644 --- a/board/ronetix/pm9g45/pm9g45.c +++ b/board/ronetix/pm9g45/pm9g45.c @@ -160,7 +160,7 @@ int board_init(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; } diff --git a/board/samsung/smdk2400/flash.c b/board/samsung/smdk2400/flash.c index fb69c21a45..47382fe8f2 100644 --- a/board/samsung/smdk2400/flash.c +++ b/board/samsung/smdk2400/flash.c @@ -231,6 +231,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) ulong result, result1; int iflag, prot, sect; int rc = ERR_OK; + ulong start; #ifdef USE_920T_MMU int cflag; @@ -286,7 +287,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) sect, info->start[sect]); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_long *addr = (vu_long *) (info->start[sect]); @@ -299,7 +300,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_STATUS_RESET; result = BIT_TIMEOUT; break; @@ -359,6 +360,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) ulong result; int rc = ERR_OK; int iflag; + ulong start; #ifdef USE_920T_MMU int cflag; @@ -389,12 +391,12 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_SUSPEND; result = BIT_TIMEOUT; break; diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c index abb0935587..d209a6f9ac 100644 --- a/board/sbc2410x/flash.c +++ b/board/sbc2410x/flash.c @@ -173,6 +173,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int iflag, cflag, prot, sect; int rc = ERR_OK; int chip; + ulong start; /* first look for protection bits */ @@ -213,7 +214,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_short *addr = (vu_short *) (info->start[sect]); @@ -233,7 +234,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) result = *addr; /* check timeout */ - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { MEM_FLASH_ADDR1 = CMD_READ_ARRAY; chip = TMO; @@ -295,6 +296,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data) int rc = ERR_OK; int cflag, iflag; int chip; + ulong start; /* * Check if Flash is (sufficiently) erased @@ -322,7 +324,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + get_timer(start); /* wait until flash is ready */ chip = 0; @@ -330,7 +332,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data) result = *addr; /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { chip = ERR | TMO; break; } diff --git a/board/scb9328/config.mk b/board/scb9328/config.mk deleted file mode 100644 index 7c5e067cbc..0000000000 --- a/board/scb9328/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# This config file is used for compilation of scb93328 sources -# -# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE. -# This allows for example having one copy located at the end of ram and stored -# in flash device and later on while developing use other location to test -# the code in RAM device only. -# - -CONFIG_SYS_TEXT_BASE = 0x08f00000 diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c index c6f94aebba..00c660a2be 100644 --- a/board/scb9328/flash.c +++ b/board/scb9328/flash.c @@ -97,11 +97,12 @@ static FLASH_BUS_RET flash_status_reg (void) static int flash_ready (ulong timeout) { int ok = 1; + ulong start; - reset_timer_masked (); + start = get_timer(0); while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) != FLASH_CMD (CFI_INTEL_SR_READY)) { - if (get_timer_masked () > timeout && timeout != 0) { + if (get_timer(start) > timeout && timeout != 0) { ok = 0; break; } diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c index 428e8c9e1c..2e31e8c7b3 100644 --- a/board/scb9328/scb9328.c +++ b/board/scb9328/scb9328.c @@ -39,23 +39,17 @@ int board_init (void) int dram_init (void) { -#if ( CONFIG_NR_DRAM_BANKS > 0 ) + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile void *)SCB9328_SDRAM_1, + SCB9328_SDRAM_1_SIZE); + + return 0; +} + +void dram_init_banksize(void) +{ gd->bd->bi_dram[0].start = SCB9328_SDRAM_1; gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 1 ) - gd->bd->bi_dram[1].start = SCB9328_SDRAM_2; - gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 2 ) - gd->bd->bi_dram[2].start = SCB9328_SDRAM_3; - gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 3 ) - gd->bd->bi_dram[3].start = SCB9328_SDRAM_4; - gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE; -#endif - return 0; } /** diff --git a/board/shannon/flash.c b/board/shannon/flash.c index 0455afa93e..179ec5f036 100644 --- a/board/shannon/flash.c +++ b/board/shannon/flash.c @@ -190,6 +190,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) int iflag, cflag, prot, sect; int rc = ERR_OK; int chip1, chip2; + ulong start; /* first look for protection bits */ @@ -231,7 +232,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ @@ -253,7 +254,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) result = *addr; /* check timeout */ - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { MEM_FLASH_ADDR1 = CMD_READ_ARRAY; chip1 = TMO; @@ -322,6 +323,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) int rc = ERR_OK; int cflag, iflag; int chip1, chip2; + ulong start; /* * Check if Flash is (sufficiently) erased @@ -349,7 +351,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait until flash is ready */ chip1 = chip2 = 0; @@ -358,7 +360,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) result = *addr; /* check timeout */ - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { chip1 = ERR | TMO; break; diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c index a7b6e70f49..63a0d33446 100644 --- a/board/syteco/jadecpu/jadecpu.c +++ b/board/syteco/jadecpu/jadecpu.c @@ -152,7 +152,7 @@ int misc_init_r(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; diff --git a/board/syteco/zmx25/Makefile b/board/syteco/zmx25/Makefile new file mode 100644 index 0000000000..5a0e5b3f2c --- /dev/null +++ b/board/syteco/zmx25/Makefile @@ -0,0 +1,51 @@ +# +# (c) 2010 Graf-Syteco, Matthias Weisser +# <weisserm@arcor.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += zmx25.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/syteco/zmx25/lowlevel_init.S b/board/syteco/zmx25/lowlevel_init.S new file mode 100644 index 0000000000..8e63de0a2d --- /dev/null +++ b/board/syteco/zmx25/lowlevel_init.S @@ -0,0 +1,110 @@ +/* + * (C) Copyright 2011 + * Matthias Weisser <weisserm@arcor.de> + * + * (C) Copyright 2009 DENX Software Engineering + * Author: John Rigby <jrigby@gmail.com> + * + * Based on U-Boot and RedBoot sources for several different i.mx + * platforms. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/macro.h> +#include <asm/arch/macro.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/asm-offsets.h> + +/* + * clocks + */ +.macro init_clocks + + /* disable clock output */ + write32 IMX_CCM_BASE + CCM_MCR, 0x00000000 + write32 IMX_CCM_BASE + CCM_CCTL, 0x50030000 + + /* + * enable all implemented clocks in all three + * clock control registers + */ + write32 IMX_CCM_BASE + CCM_CGCR0, 0x1fffffff + write32 IMX_CCM_BASE + CCM_CGCR1, 0xffffffff + write32 IMX_CCM_BASE + CCM_CGCR2, 0xfffff + + /* Devide NAND clock by 32 */ + write32 IMX_CCM_BASE + CCM_PCDR2, 0x0101011F +.endm + +/* + * sdram controller init + */ +.macro init_lpddr + ldr r0, =IMX_ESDRAMC_BASE + ldr r2, =IMX_SDRAM_BANK0_BASE + + /* + * reset SDRAM controller + * then wait for initialization to complete + */ + ldr r1, =(1 << 1) | (1 << 2) + str r1, [r0, #ESDRAMC_ESDMISC] +1: ldr r3, [r0, #ESDRAMC_ESDMISC] + tst r3, #(1 << 31) + beq 1b + ldr r1, =(1 << 2) + str r1, [r0, #ESDRAMC_ESDMISC] + + ldr r1, =0x002a7420 + str r1, [r0, #ESDRAMC_ESDCFG0] + + /* control | precharge */ + ldr r1, =0x92216008 + str r1, [r0, #ESDRAMC_ESDCTL0] + /* dram command encoded in address */ + str r1, [r2, #0x400] + + /* auto refresh */ + ldr r1, =0xa2216008 + str r1, [r0, #ESDRAMC_ESDCTL0] + /* read dram twice to auto refresh */ + ldr r3, [r2] + ldr r3, [r2] + + /* control | load mode */ + ldr r1, =0xb2216008 + str r1, [r0, #ESDRAMC_ESDCTL0] + + /* mode register of lpddram */ + strb r1, [r2, #0x33] + + /* extended mode register of lpddrram */ + ldr r2, =0x81000000 + strb r1, [r2] + + /* control | normal */ + ldr r1, =0x82216008 + str r1, [r0, #ESDRAMC_ESDCTL0] +.endm + +.globl lowlevel_init +lowlevel_init: + init_aips + init_max + init_clocks + init_lpddr + mov pc, lr diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c new file mode 100644 index 0000000000..f0550389eb --- /dev/null +++ b/board/syteco/zmx25/zmx25.c @@ -0,0 +1,203 @@ +/* + * (c) 2011 Graf-Syteco, Matthias Weisser + * <weisserm@arcor.de> + * + * Based on tx25.c: + * (C) Copyright 2009 DENX Software Engineering + * Author: John Rigby <jrigby@gmail.com> + * + * Based on imx27lite.c: + * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net> + * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> + * And: + * RedBoot tx25_misc.c Copyright (C) 2009 Red Hat + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <mxc_gpio.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/imx25-pinmux.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init() +{ + struct iomuxc_mux_ctl *muxctl; + struct iomuxc_pad_ctl *padctl; + struct iomuxc_pad_input_select *inputselect; + u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; + u32 gpio_mux_mode1 = MX25_PIN_MUX_MODE(1); + u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); + u32 gpio_mux_mode6 = MX25_PIN_MUX_MODE(6); + u32 input_select1 = MX25_PAD_INPUT_SELECT_DAISY(1); + u32 input_select2 = MX25_PAD_INPUT_SELECT_DAISY(2); + + icache_enable(); + + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; + inputselect = (struct iomuxc_pad_input_select *)IMX_IOPADINPUTSEL_BASE; + + /* Setup of core volatage selection pin to run at 1.4V */ + writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 15), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 15), 1); + + /* Setup of input daisy chains for SD card pins*/ + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_clk); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data0); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data1); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data2); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data3); + + /* Setup of digital output for USB power and OC */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 28), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 28), 1); + + writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 18), MXC_GPIO_DIRECTION_IN); + + /* Setup of digital output control pins */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d7); /* Ouput 2 Ctrl GPIO1[6] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d6); /* Ouput 1 Stat GPIO1[31]*/ + writel(gpio_mux_mode5, &muxctl->pad_csi_d5); /* Ouput 2 Stat GPIO1[30]*/ + + writel(0, &padctl->pad_csi_d6); /* Ouput 1 Stat pull up off */ + writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ + + /* Switch both output drivers off */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 7), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 7), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 6), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 6), MXC_GPIO_DIRECTION_OUT); + + /* Setup of key input pin GPIO2[29]*/ + writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); + writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(2, 29), MXC_GPIO_DIRECTION_IN); + + /* Setup of status LED outputs */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ + + /* Switch both LEDs off */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(4, 21), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 29), MXC_GPIO_DIRECTION_OUT); + + /* Setup of CAN1 and CAN2 signals */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_b); /* CAN1 RX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_c); /* CAN2 TX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_d); /* CAN2 RX */ + + /* Setup of input daisy chains for CAN signals*/ + writel(input_select1, &inputselect->can1_ipp_ind_canrx); /* CAN1 RX */ + writel(input_select1, &inputselect->can2_ipp_ind_canrx); /* CAN2 RX */ + + /* Setup of I2C3 signals */ + writel(gpio_mux_mode1, &muxctl->pad_cspi1_ss1); /* I2C3 SDA */ + writel(gpio_mux_mode1, &muxctl->pad_gpio_e); /* I2C3 SCL */ + + /* Setup of input daisy chains for I2C3 signals*/ + writel(input_select1, &inputselect->i2c3_ipp_sda_in); /* I2C3 SDA */ + writel(input_select2, &inputselect->i2c3_ipp_scl_in); /* I2C3 SCL */ + + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_ZMX25; + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int board_late_init(void) +{ + const char *e; + +#ifdef CONFIG_FEC_MXC + struct iomuxc_mux_ctl *muxctl; + struct iomuxc_pad_ctl *padctl; + u32 gpio_mux_mode2 = MX25_PIN_MUX_MODE(2); + u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); + + /* + * fec pin init is generic + */ + mx25_fec_init_pins(); + + /* + * Set up LAN-RESET and FEC_RX_ERR + * + * LAN-RESET: GPIO3[16] is ALT 5 mode of pin U20 + * FEC_RX_ERR: FEC_RX_ERR is ALT 2 mode of pin R2 + */ + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; + + writel(gpio_mux_mode5, &muxctl->pad_upll_bypclk); + writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); + + /* assert PHY reset (low) */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 16), MXC_GPIO_DIRECTION_OUT); + + udelay(5000); + + /* deassert PHY reset */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 1); + + udelay(5000); +#endif + + e = getenv("gs_base_board"); + if (e != NULL) { + if (strcmp(e, "G283") == 0) { + int key = mxc_gpio_get(MXC_GPIO_PORT_TO_NUM(2, 29)); + + if (key) { + /* Switch on both LEDs to inidcate boot mode */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + + setenv("preboot", "run gs_slow_boot"); + } else + setenv("preboot", "run gs_fast_boot"); + } + } + + return 0; +} + +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, + PHYS_SDRAM_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = gd->ram_size; +} diff --git a/board/ti/omap1610inn/flash.c b/board/ti/omap1610inn/flash.c index 36200ad854..1b67d08880 100644 --- a/board/ti/omap1610inn/flash.c +++ b/board/ti/omap1610inn/flash.c @@ -278,7 +278,7 @@ void flash_unprotect_sectors (FPWV * addr) int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -311,10 +311,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -329,7 +325,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) flash_unprotect_sectors (addr); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050;/* clear status register */ *addr = (FPW) 0x00200020;/* erase setup */ @@ -338,7 +334,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); /* suspend erase */ @@ -458,6 +454,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -470,11 +467,11 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c index 5b56b98393..185bc2d73a 100644 --- a/board/ti/omap730p2/flash.c +++ b/board/ti/omap730p2/flash.c @@ -261,7 +261,7 @@ void flash_unprotect_sectors (FPWV * addr) int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -294,10 +294,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -312,7 +308,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) flash_unprotect_sectors (addr); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050;/* clear status register */ *addr = (FPW) 0x00200020;/* erase setup */ @@ -321,7 +317,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); /* suspend erase */ @@ -441,6 +437,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -454,11 +451,11 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/xaeniax/flash.c b/board/xaeniax/flash.c index b051c89843..6cb0acaa79 100644 --- a/board/xaeniax/flash.c +++ b/board/xaeniax/flash.c @@ -221,7 +221,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -254,9 +254,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -269,14 +266,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -393,6 +390,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -406,11 +404,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/xm250/flash.c b/board/xm250/flash.c index b02149cd64..e825abae1a 100644 --- a/board/xm250/flash.c +++ b/board/xm250/flash.c @@ -250,7 +250,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -283,9 +283,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -298,14 +295,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -422,6 +419,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -435,11 +433,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } @@ -470,6 +468,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) int rc = 0; vu_long *addr = (vu_long *)(info->start[sector]); int flag = disable_interrupts(); + ulong start; *addr = INTEL_CLEAR; /* Clear status register */ if (prot) { /* Set sector lock bit */ @@ -481,10 +480,10 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) *addr = INTEL_CONFIRM; /* clear */ } - reset_timer_masked (); + start = get_timer(0); while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { printf("Flash lock bit operation timed out\n"); rc = 1; break; @@ -510,13 +509,13 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) { if (info->protect[i]) { - reset_timer_masked (); + start = get_timer(0); addr = (vu_long *)(info->start[i]); *addr = INTEL_LOCKBIT; /* Sector lock bit */ *addr = INTEL_PROTECT; /* set */ while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { printf("Flash lock bit operation timed out\n"); rc = 1; diff --git a/board/zylonite/flash.c b/board/zylonite/flash.c index 5ba84c68ec..3ee0ab8986 100644 --- a/board/zylonite/flash.c +++ b/board/zylonite/flash.c @@ -224,7 +224,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -257,9 +257,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -272,14 +269,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -396,6 +393,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -409,11 +407,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/boards.cfg b/boards.cfg index 5127e23dde..5cfaa789f5 100644 --- a/boards.cfg +++ b/boards.cfg @@ -131,6 +131,7 @@ rd6281a arm arm926ejs - Marvell sheevaplug arm arm926ejs - Marvell kirkwood dockstar arm arm926ejs - Seagate kirkwood jadecpu arm arm926ejs jadecpu syteco mb86r0x +zmx25 arm arm926ejs zmx25 syteco mx25 imx27lite arm arm926ejs imx27lite logicpd mx27 magnesium arm arm926ejs imx27lite logicpd mx27 nhk8815 arm arm926ejs nhk8815 st nomadik @@ -139,7 +140,7 @@ omap5912osk arm arm926ejs - ti edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon ca9x4_ct_vxp arm armv7 vexpress armltd -efikamx arm armv7 efikamx - mx5 mx51evk:IMX_CONFIG=board/efikamx/imximage.cfg +efikamx arm armv7 efikamx - mx5 efikamx:IMX_CONFIG=board/efikamx/imximage.cfg mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg mx53ard arm armv7 mx53ard freescale mx5 mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg diff --git a/common/memsize.c b/common/memsize.c index 6c275c9b25..963e4f35b1 100644 --- a/common/memsize.c +++ b/common/memsize.c @@ -37,7 +37,7 @@ * the actually available RAM size between addresses `base' and * `base + maxsize'. */ -long get_ram_size(volatile long *base, long maxsize) +long get_ram_size(long *base, long maxsize) { volatile long *addr; long save[32]; diff --git a/drivers/mtd/spi/eeprom_m95xxx.c b/drivers/mtd/spi/eeprom_m95xxx.c index 632db4e9e0..ef8ed6f4c5 100644 --- a/drivers/mtd/spi/eeprom_m95xxx.c +++ b/drivers/mtd/spi/eeprom_m95xxx.c @@ -75,6 +75,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len) { struct spi_slave *slave; char buf[3]; + ulong start; slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, 1, 1000000, CONFIG_DEFAULT_SPI_MODE); @@ -102,7 +103,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len) if(spi_xfer(slave, len * 8, buffer, NULL, SPI_XFER_END)) return -1; - reset_timer_masked(); + start = get_timer(0); do { buf[0] = SPI_EEPROM_RDSR; buf[1] = 0; @@ -111,7 +112,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len) if (!(buf[1] & 1)) break; - } while (get_timer_masked() < CONFIG_SYS_SPI_WRITE_TOUT); + } while (get_timer(start) < CONFIG_SYS_SPI_WRITE_TOUT); if (buf[1] & 1) printf ("*** spi_write: Time out while writing!\n"); diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 4e4cd2749f..ab90afa41e 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -86,7 +86,7 @@ static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr, /* * wait for the related interrupt */ - start = get_timer_masked(); + start = get_timer(0); while (!(readl(&fec->eth->ievent) & FEC_IEVENT_MII)) { if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) { printf("Read MDIO failed...\n"); @@ -138,7 +138,7 @@ static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr, /* * wait for the MII interrupt */ - start = get_timer_masked(); + start = get_timer(0); while (!(readl(&fec->eth->ievent) & FEC_IEVENT_MII)) { if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) { printf("Write MDIO failed...\n"); @@ -189,7 +189,7 @@ static int miiphy_wait_aneg(struct eth_device *dev) /* * Wait for AN completion */ - start = get_timer_masked(); + start = get_timer(0); do { if (get_timer(start) > (CONFIG_SYS_HZ * 5)) { printf("%s: Autonegotiation timeout\n", dev->name); diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c index c9e324ee26..f54817e58d 100644 --- a/drivers/net/netarm_eth.c +++ b/drivers/net/netarm_eth.c @@ -81,9 +81,10 @@ static unsigned int na_mii_read (int reg) static int na_mii_poll_busy (void) { + ulong start; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - while (get_timer_masked () < NA_MII_POLL_BUSY_DELAY) { + start = get_timer(0)); + while (get_timer(start) < NA_MII_POLL_BUSY_DELAY) { if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) { return 1; } @@ -164,19 +165,20 @@ static unsigned int na_mii_check_speed (void) static int reset_eth (void) { int pt; + ulong start; na_get_mac_addr (); pt = na_mii_identify_phy (); /* reset the phy */ na_mii_write (MII_PHY_CONTROL, 0x8000); - reset_timer_masked (); - while (get_timer_masked () < NA_MII_NEGOTIATE_DELAY) { + start = get_timer(0); + while (get_timer(start) < NA_MII_NEGOTIATE_DELAY) { if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) { break; } } - if (get_timer_masked () >= NA_MII_NEGOTIATE_DELAY) + if (get_timer(start) >= NA_MII_NEGOTIATE_DELAY) printf ("phy reset timeout\n"); /* set the PCS reg */ diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 698e7266e8..81381d9b9a 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -60,8 +60,6 @@ static unsigned long spi_bases[] = { 0x53f84000, }; -#define mxc_get_clock(x) mx31_get_ipg_clk() - #elif defined(CONFIG_MX51) #define MXC_CSPICTRL_EN (1 << 0) diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 6af35aba5f..a0cfbb74bd 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -29,6 +29,14 @@ #define USBCTRL_OTGBASE_OFFSET 0x600 +#ifdef CONFIG_MX25 +#define MX25_USB_CTRL_IP_PUE_DOWN_BIT (1<<6) +#define MX25_USB_CTRL_HSTD_BIT (1<<5) +#define MX25_USB_CTRL_USBTE_BIT (1<<4) +#define MX25_USB_CTRL_OCPOL_OTG_BIT (1<<3) +#endif + +#ifdef CONFIG_MX31 #define MX31_OTG_SIC_SHIFT 29 #define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) #define MX31_OTG_PM_BIT (1 << 24) @@ -42,12 +50,19 @@ #define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) #define MX31_H1_PM_BIT (1 << 8) #define MX31_H1_DT_BIT (1 << 4) +#endif static int mxc_set_usbcontrol(int port, unsigned int flags) { unsigned int v; + +#ifdef CONFIG_MX25 + v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT | + MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT; +#endif + #ifdef CONFIG_MX31 - v = readl(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET); + v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); switch (port) { case 0: /* OTG port */ @@ -85,36 +100,38 @@ static int mxc_set_usbcontrol(int port, unsigned int flags) default: return -EINVAL; } - - writel(v, MX31_OTG_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET); #endif - return 0; + + writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); + return 0; } int ehci_hcd_init(void) { - u32 tmp; struct usb_ehci *ehci; +#ifdef CONFIG_MX31 + u32 tmp; struct clock_control_regs *sc_regs = (struct clock_control_regs *)CCM_BASE; tmp = __raw_readl(&sc_regs->ccmr); __raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ; +#endif udelay(80); /* Take USB2 */ - ehci = (struct usb_ehci *)(MX31_OTG_BASE_ADDR + + ehci = (struct usb_ehci *)(IMX_USB_BASE + (0x200 * CONFIG_MXC_USB_PORT)); hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); setbits_le32(&ehci->usbmode, CM_HOST); +#ifdef CONFIG_MX31 setbits_le32(&ehci->control, USB_EN); __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); - +#endif mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS); udelay(10000); diff --git a/include/common.h b/include/common.h index 2c8513ae18..c5d2dcedf3 100644 --- a/include/common.h +++ b/include/common.h @@ -317,7 +317,7 @@ const char *symbol_lookup(unsigned long addr, unsigned long *caddr); void api_init (void); /* common/memsize.c */ -long get_ram_size (volatile long *, long); +long get_ram_size (long *, long); /* $(BOARD)/$(BOARD).c */ void reset_phy (void); diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 80ad342ce8..18aaadfb79 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -190,7 +190,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "mmcargs=setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rw " \ "rootfstype=ext3 rootwait\0" \ diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index a04ac4982f..7d3363aa79 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -38,6 +38,8 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_TEXT_BASE 0x97800000 + #define CONFIG_SYS_L2CACHE_OFF /* @@ -47,6 +49,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_MMC #define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #undef CONFIG_CMD_IMLS diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 5f7002316d..35ceacdeca 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -162,8 +162,10 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) /*----------------------------------------------------------------------- * FLASH and environment organization diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 6a92ec3bd0..1b5d93158e 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -126,6 +126,11 @@ #define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */ #define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */ +#define CONFIG_SYS_TEXT_BASE 0x10000000 + +#define CONFIG_SYS_SDRAM_BASE SCB9328_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (SCB9328_SDRAM_1 + 0xf00000) + /* * Configuration for FLASH memory for the Synertronixx board */ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 3627ce7d3a..4bced0c999 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -57,6 +57,12 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_STACKSIZE (256*1024) +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + /* Serial Driver Info */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h new file mode 100644 index 0000000000..374c88a0f4 --- /dev/null +++ b/include/configs/zmx25.h @@ -0,0 +1,180 @@ +/* + * (c) 2011 Graf-Syteco, Matthias Weisser + * <weisserm@arcor.de> + * + * Configuation settings for the zmx25 board + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_MX25 +#define CONFIG_MX25_CLK32 32768 /* OSC32K frequency */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + +/* + * Environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "gs_fast_boot=setenv bootdelay 5\0" \ + "gs_slow_boot=setenv bootdelay 10\0" \ + "bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \ + "fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \ + "bootm 0x81000000; bootelf 0x81000000\0" + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define BOARD_LATE_INIT + +/* + * Compressions + */ +#define CONFIG_LZO + +/* + * Hardware drivers + */ + +/* + * GPIO + */ +#define CONFIG_MXC_GPIO + +/* + * Serial + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX25_UART2 +#define CONFIG_CONS_INDEX 1 /* use UART2 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Ethernet + */ +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_PHYADDR 0x00 +#define CONFIG_MII +#define CONFIG_NET_MULTI + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_NET +#define CONFIG_CMD_CACHE + +#define CONFIG_SYS_64BIT_VSPRINTF + +/* + * Additional command + */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_MXC +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORT 2 +#define CONFIG_MXC_USB_PORTSC 0xC0000000 +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT +#endif /* CONFIG_CMD_USB */ + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x80000000 /* start address of LPDDRRAM */ +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_SP_ADDR 0x78020000 /* end of internal SRAM */ + +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_FLASH_BASE 0xA0000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 + +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (128 * 1024) + +/* + * CFI FLASH driver setup + */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* ~10x faster */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024)) +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) + +#define CONFIG_SYS_PROMPT "zmx25> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_PREBOOT "" + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "delaygs" +#define CONFIG_AUTOBOOT_STOP_STR "stopgs" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#endif /* __CONFIG_H */ diff --git a/include/mxc_gpio.h b/include/mxc_gpio.h index 002ba61e00..f673dcecd6 100644 --- a/include/mxc_gpio.h +++ b/include/mxc_gpio.h @@ -24,6 +24,11 @@ #ifndef __MXC_GPIO_H #define __MXC_GPIO_H +/* Converts a GPIO port number and the internal bit position + * to the GPIO number + */ +#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f)) + enum mxc_gpio_direction { MXC_GPIO_DIRECTION_IN, MXC_GPIO_DIRECTION_OUT, @@ -42,4 +42,14 @@ $(HOSTOBJS): $(obj)%.o: %.c $(NOPEDOBJS): $(obj)%.o: %.c $(HOSTCC) $(HOSTCFLAGS_NOPED) $(HOSTCFLAGS_$(@F)) $(HOSTCFLAGS_$(BCURDIR)) -o $@ $< -c +$(TOPDIR)/include/asm/arch/asm-offsets.h: $(TOPDIR)/include/autoconf.mk.dep \ + $(TOPDIR)/$(CPUDIR)/$(SOC)/asm-offsets.s + @echo Generating $@ + $(TOPDIR)/tools/scripts/make-asm-offsets $(TOPDIR)/$(CPUDIR)/$(SOC)/asm-offsets.s $@ + +$(TOPDIR)/$(CPUDIR)/$(SOC)/asm-offsets.s: $(TOPDIR)/include/autoconf.mk.dep \ + $(TOPDIR)/$(CPUDIR)/$(SOC)/asm-offsets.c + $(CC) -DDO_DEPS_ONLY \ + $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \ + -o $@ $(TOPDIR)/$(CPUDIR)/$(SOC)/asm-offsets.c -c -S ######################################################################### |