diff options
-rw-r--r-- | arch/arm/cpu/armv7/sunxi/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/sunxi/dram_sun9i.c | 987 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-sunxi/clock_sun9i.h | 34 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 6 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-sunxi/dram.h | 2 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-sunxi/dram_sun9i.h | 275 | ||||
-rw-r--r-- | board/sunxi/Kconfig | 6 |
7 files changed, 1296 insertions, 15 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index ce8e5717e7..229dd63138 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -57,5 +57,6 @@ obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o +obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o obj-y += fel_utils.o endif diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun9i.c b/arch/arm/cpu/armv7/sunxi/dram_sun9i.c new file mode 100644 index 0000000000..104bc6a870 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/dram_sun9i.c @@ -0,0 +1,987 @@ +/* + * sun9i dram controller initialisation + * + * (C) Copyright 2007-2015 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Jerry Wang <wangflord@allwinnertech.com> + * + * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH + * Philipp Tomsich <philipp.tomsich@theobroma-systems.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <ram.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/dram.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define DRAM_CLK (CONFIG_DRAM_CLK * 1000000) + +/* + The following amounts to an extensive rewrite of the code received from + Allwinner as part of the open-source bootloader release (refer to + https://github.com/allwinner-zh/bootloader.git) and augments the upstream + sources (which act as the primary reference point for the inner workings + of the 'underdocumented' DRAM controller in the A80) using the following + documentation for other memory controllers based on the (Synopsys) + Designware IP (DDR memory protocol controller and DDR PHY) + * TI Keystone II Architecture: DDR3 Memory Controller, User's Guide + Document 'SPRUHN7C', Oct 2013 (revised March 2015) + * Xilinx Zynq UltraScale+ MPSoC Register Reference + document ug1087 (v1.0) + Note that the Zynq-documentation provides a very close match for the DDR + memory protocol controller (and provides a very good guide to the rounding + rules for various timings), whereas the TI Keystone II document should be + referred to for DDR PHY specifics only. + + The DRAM controller in the A80 runs at half the frequency of the DDR PHY + (i.e. the rules for MEMC_FREQ_RATIO=2 from the Zynq-documentation apply). + + Known limitations + ================= + In the current state, the following features are not fully supported and + a number of simplifying assumptions have been made: + 1) Only DDR3 support is implemented, as our test platform (the A80-Q7 + module) is designed to accomodate DDR3/DDR3L. + 2) Only 2T-mode has been implemented and tested. + 3) The controller supports two different clocking strategies (PLL6 can + either be 2*CK or CK/2)... we only support the 2*CK clock at this + time and haven't verified whether the alternative clocking strategy + works. If you are interested in porting this over/testing this, + please refer to cases where bit 0 of 'dram_tpr8' is tested in the + original code from Allwinner. + 4) Support for 2 ranks per controller is not implemented (as we don't + the hardware to test it). + + Future directions + ================= + The driver should be driven from a device-tree based configuration that + can dynamically provide the necessary timing parameters (i.e. target + frequency and speed-bin information)---the data structures used in the + calculation of the timing parameters are already designed to capture + similar information as the device tree would provide. + + To enable a device-tree based configuration of the sun9i platform, we + will need to enable CONFIG_TPL and bootstrap in 3 stages: initially + into SRAM A1 (40KB) and next into SRAM A2 (160KB)---which would be the + stage to initialise the platform via the device-tree---before having + the full U-Boot run from DDR. +*/ + + + +/* A number of DDR3 timings are given as "the greater of a fixed number of + clock cycles (CK) or nanoseconds. We express these using a structure + that holds a cycle count and a duration in picoseconds (so we can model + sub-ns timings, such as 7.5ns without losing precision or resorting to + rounding up early. */ +struct dram_sun9i_timing +{ + u32 ck; + u32 ps; +}; + +/* */ +struct dram_sun9i_cl_cwl_timing +{ + u32 CL; + u32 CWL; + u32 tCKmin; /* in ps */ + u32 tCKmax; /* in ps */ +}; + +struct dram_sun9i_para { + u32 dram_type; + + u8 bus_width; + u8 chan; + u8 rank; + u8 rows; + u16 page_size; + + /* Timing information for each speed-bin */ + struct dram_sun9i_cl_cwl_timing *cl_cwl_table; + u32 cl_cwl_numentries; + + /* For the timings, we try to keep the order and grouping used in + JEDEC Standard No. 79-3F */ + + /* timings */ + u32 tREFI; /* in ns */ + u32 tRFC; /* in ns */ + + u32 tRAS; /* in ps */ + + /* command and address timing */ + u32 tDLLK; /* in nCK */ + struct dram_sun9i_timing tRTP; + struct dram_sun9i_timing tWTR; + u32 tWR; /* in nCK */ + u32 tMRD; /* in nCK */ + struct dram_sun9i_timing tMOD; + u32 tRCD; /* in ps */ + u32 tRP; /* in ps */ + u32 tRC; /* in ps */ + u32 tCCD; /* in nCK */ + struct dram_sun9i_timing tRRD; + u32 tFAW; /* in ps */ + + /* calibration timing */ + // struct dram_sun9i_timing tZQinit; + struct dram_sun9i_timing tZQoper; + struct dram_sun9i_timing tZQCS; + + /* reset timing */ + // struct dram_sun9i_timing tXPR; + + /* self-refresh timings */ + struct dram_sun9i_timing tXS; + u32 tXSDLL; /* in nCK */ + // struct dram_sun9i_timing tCKESR; + struct dram_sun9i_timing tCKSRE; + struct dram_sun9i_timing tCKSRX; + + /* power-down timings */ + struct dram_sun9i_timing tXP; + struct dram_sun9i_timing tXPDLL; + struct dram_sun9i_timing tCKE; + + /* write leveling timings */ + u32 tWLMRD; /* min, in nCK */ + // u32 tWLDQSEN; /* min, in nCK */ + u32 tWLO; /* max, in ns */ + // u32 tWLOE; /* max, in ns */ + + // u32 tCKDPX; /* in nCK */ + // u32 tCKCSX; /* in nCK */ +}; + + +void sdelay(unsigned long); +static void mctl_sys_init(void); + +#define SCHED_RDWR_IDLE_GAP(n) ((n & 0xff) << 24) +#define SCHED_GO2CRITICAL_HYSTERESIS(n) ((n & 0xff) << 16) +#define SCHED_LPR_NUM_ENTRIES(n) ((n & 0xff) << 8) +#define SCHED_PAGECLOSE (1 << 2) +#define SCHED_PREFER_WRITE (1 << 1) +#define SCHED_FORCE_LOW_PRI_N (1 << 0) + +#define SCHED_CONFIG ( SCHED_RDWR_IDLE_GAP(0xf) | \ + SCHED_GO2CRITICAL_HYSTERESIS(0x80) | \ + SCHED_LPR_NUM_ENTRIES(0x20) | \ + SCHED_FORCE_LOW_PRI_N ) +#define PERFHPR0_CONFIG 0x0000001f +#define PERFHPR1_CONFIG 0x1f00001f +#define PERFLPR0_CONFIG 0x000000ff +#define PERFLPR1_CONFIG 0x0f0000ff +#define PERFWR0_CONFIG 0x000000ff +#define PERFWR1_CONFIG 0x0f0001ff + + +static void mctl_ctl_sched_init(unsigned long base) +{ + struct sunxi_mctl_ctl_reg *mctl_ctl = + (struct sunxi_mctl_ctl_reg*)base; + + /* Needs to be done before the global clk enable... */ + writel(SCHED_CONFIG, &mctl_ctl->sched); + writel(PERFHPR0_CONFIG, &mctl_ctl->perfhpr0); + writel(PERFHPR1_CONFIG, &mctl_ctl->perfhpr1); + writel(PERFLPR0_CONFIG, &mctl_ctl->perflpr0); + writel(PERFLPR1_CONFIG, &mctl_ctl->perflpr1); + writel(PERFWR0_CONFIG, &mctl_ctl->perfwr0); + writel(PERFWR1_CONFIG, &mctl_ctl->perfwr1); +} + + +static void mctl_sys_init() +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + +#if 0 + clock_set_pll6(use_2channelPLL ? (DRAM_CLK * 2) : (DRAM_CLK / 2), false); +#endif + + debug("Setting PLL6 to %d\n", DRAM_CLK * 2); + clock_set_pll6(DRAM_CLK * 2); + +#if 0 + if((para->dram_clk <= 400)|((para->dram_tpr8 & 0x1)==0)) //PLL6 should be 2*CK + { + ccm_setup_pll6_ddr_clk( (1000000 * (para->dram_clk)*2),0 );//ccm_setup_pll6_ddr_clk(PLL6_DDR_CLK); + } + else //PLL6 should be CK/2 + { + ccm_setup_pll6_ddr_clk( (1000000 * (para->dram_clk)/2),1 ); + } +#endif + +#if 0 + if( para->dram_tpr13 & (0xf<<18) )//------------------------------------------------------------------------- + { + //******************************************** + //bit21:bit18=0001:pll °Ú·ù0.4 + //bit21:bit18=0010:pll °Ú·ù0.3 + //bit21:bit18=0100:pll °Ú·ù0.2 + //bit21:bit18=1000:pll °Ú·ù0.1 + //********************************************** + dram_dbg("DRAM fre extend open !\n"); + reg_val=mctl_read_w(CCM_PLL6_DDR_REG); + reg_val&=(0x1<<16); + reg_val=reg_val>>16; + + if(para->dram_tpr13 & (0x1<<18)) + { + mctl_write_w(CCM_PLL_BASE + 0x114, (0x3333U|(0x3<<17)|(reg_val<<19)|(0x120U<<20)|(0x2U<<29)|(0x1U<<31))); + } + else if(para->dram_tpr13 & (0x1<<19))//------------------------------------------------------------------------------------------------------------------------------------------------------------ + { + mctl_write_w(CCM_PLL_BASE + 0x114, (0x6666U|(0x3U<<17)|(reg_val<<19)|(0xD8U<<20)|(0x2U<<29)|(0x1U<<31))); + } + else if(para->dram_tpr13 & (0x1<<20))//------------------------------------------------------------------------------------------------------------------------------------------------------------ + { + mctl_write_w(CCM_PLL_BASE + 0x114, (0x9999U|(0x3U<<17)|(reg_val<<19)|(0x90U<<20)|(0x2U<<29)|(0x1U<<31))); + } + else if(para->dram_tpr13 & (0x1<<21))//------------------------------------------------------------------------------------------------------------------------------------------------------------ + { + mctl_write_w(CCM_PLL_BASE + 0x114, (0xccccU|(0x3U<<17)|(reg_val<<19)|(0x48U<<20)|(0x2U<<29)|(0x1U<<31))); + } + + reg_val = mctl_read_w(CCM_PLL6_DDR_REG);//frequency extend open + reg_val |= ((0x1<<24)|(0x1<<30)); + mctl_write_w(CCM_PLL6_DDR_REG, reg_val); + + + while(mctl_read_w(CCM_PLL6_DDR_REG) & (0x1<<30)); + } + + aw_delay(0x20000); //make some delay +#endif + +#if 1 + /* assert mctl reset */ + clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL); + /* stop mctl clock */ + clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); + + sdelay(2000); +#endif + + /* deassert mctl reset */ + setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL); + /* enable mctl clock */ + setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); + + /* set up the transactions scheduling before enabling the global clk */ + mctl_ctl_sched_init(SUNXI_DRAM_CTL0_BASE); + mctl_ctl_sched_init(SUNXI_DRAM_CTL1_BASE); + sdelay(1000); + + debug("2\n"); + + writel((3 << 12) | (1 << 16), &ccm->dram_clk_cfg); // (3<<12): PLL_DDR + do { + debug("Waiting for DRAM_CLK_CFG\n"); + sdelay(10000); + } while (readl(&ccm->dram_clk_cfg) & (1 << 16)); + setbits_le32(&ccm->dram_clk_cfg, (1 << 31)); + + /* TODO: we only support the common case ... i.e. 2*CK */ + setbits_le32(&mctl_com->ccr, (1 << 14) | (1 << 30)); + writel(2, &mctl_com->rmcr); // controller clock is PLL6/4 + + sdelay(2000); + +#if 0 + if((para->dram_clk <= 400)|((para->dram_tpr8 & 0x1)==0)) //PLL6 should be 2*CK + { + //gating 2 channel pll + reg_val = mctl_read_w(MC_CCR); + reg_val |= ((0x1<<14)|(0x1U<<30)); + mctl_write_w(MC_CCR, reg_val); + mctl_write_w(MC_RMCR, 0x2); //controller clock use pll6/4 + } + else + { + //enalbe 2 channel pll + reg_val = mctl_read_w(MC_CCR); + reg_val &= ~((0x1<<14)|(0x1U<<30)); + mctl_write_w(MC_CCR, reg_val); + mctl_write_w(MC_RMCR, 0x0); //controller clock use pll6 + } +#endif + +#if 0 + reg_val = mctl_read_w(MC_CCR); + reg_val &= ~((0x1<<15)|(0x1U<<31)); + mctl_write_w(MC_CCR, reg_val); + aw_delay(20); + //aw_delay(0x10); +#endif + + clrbits_le32(&mctl_com->ccr, MCTL_CCR_CH0_CLK_EN | MCTL_CCR_CH1_CLK_EN); + sdelay(1000); + + setbits_le32(&mctl_com->ccr, MCTL_CCR_CH0_CLK_EN); + // if (para->chan == 2) /* TODO */ + setbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN); +} + + +static void mctl_com_init(struct dram_sun9i_para* para) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + + /* TODO: hard-wired for DDR3 now */ + writel(((para->chan == 2) ? MCTL_CR_CHANNEL_DUAL : MCTL_CR_CHANNEL_SINGLE) + | MCTL_CR_DRAMTYPE_DDR3 | MCTL_CR_BANK(1) | MCTL_CR_ROW(para->rows) + | ((para->bus_width == 32) ? MCTL_CR_BUSW32 : MCTL_CR_BUSW16) + | MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_RANK(para->rank), + &mctl_com->cr); + + debug("CR: %d\n", readl(&mctl_com->cr)); +} + + +static u32 mctl_channel_init(u32 ch_index, struct dram_sun9i_para* para) +{ + struct sunxi_mctl_ctl_reg *mctl_ctl; + struct sunxi_mctl_phy_reg *mctl_phy; + + u32 CL = 0; + u32 CWL = 0; + u16 mr[4] = { 0, }; /* initialise to silence compiler warnings due to non-DDR3 + placeholder code */ + +#define PS2CYCLES_FLOOR(n) ((n * CONFIG_DRAM_CLK) / 1000000) +#define PS2CYCLES_ROUNDUP(n) ((n * CONFIG_DRAM_CLK + 999999) / 1000000) +#define NS2CYCLES_FLOOR(n) ((n * CONFIG_DRAM_CLK) / 1000) +#define NS2CYCLES_ROUNDUP(n) ((n * CONFIG_DRAM_CLK + 999) / 1000) +#define MAX(a, b) ((a) > (b) ? (a) : (b)) + + /* Convert the values to cycle counts (nCK) from what is provided by the + definition of each speed bin. */ + // const u32 tREFI = NS2CYCLES_FLOOR(para->tREFI); + const u32 tREFI = NS2CYCLES_FLOOR(para->tREFI); + const u32 tRFC = NS2CYCLES_ROUNDUP(para->tRFC); + const u32 tRCD = PS2CYCLES_ROUNDUP(para->tRCD); + const u32 tRP = PS2CYCLES_ROUNDUP(para->tRP); + const u32 tRC = PS2CYCLES_ROUNDUP(para->tRC); + const u32 tRAS = PS2CYCLES_ROUNDUP(para->tRAS); + + /* command and address timing */ + const u32 tDLLK = para->tDLLK; + const u32 tRTP = MAX(para->tRTP.ck, PS2CYCLES_ROUNDUP(para->tRTP.ps)); + const u32 tWTR = MAX(para->tWTR.ck, PS2CYCLES_ROUNDUP(para->tWTR.ps)); + const u32 tWR = NS2CYCLES_FLOOR(para->tWR); + const u32 tMRD = para->tMRD; + const u32 tMOD = MAX(para->tMOD.ck, PS2CYCLES_ROUNDUP(para->tMOD.ps)); + const u32 tCCD = para->tCCD; + const u32 tRRD = MAX(para->tRRD.ck, PS2CYCLES_ROUNDUP(para->tRRD.ps)); + const u32 tFAW = PS2CYCLES_ROUNDUP(para->tFAW); + + /* calibration timings */ + // const u32 tZQinit = MAX(para->tZQinit.ck, PS2CYCLES_ROUNDUP(para->tZQinit.ps)); + const u32 tZQoper = MAX(para->tZQoper.ck, PS2CYCLES_ROUNDUP(para->tZQoper.ps)); + const u32 tZQCS = MAX(para->tZQCS.ck, PS2CYCLES_ROUNDUP(para->tZQCS.ps)); + + /* reset timing */ + // const u32 tXPR = MAX(para->tXPR.ck, PS2CYCLES_ROUNDUP(para->tXPR.ps)); + + /* power-down timings */ + const u32 tXP = MAX(para->tXP.ck, PS2CYCLES_ROUNDUP(para->tXP.ps)); + const u32 tXPDLL = MAX(para->tXPDLL.ck, PS2CYCLES_ROUNDUP(para->tXPDLL.ps)); + const u32 tCKE = MAX(para->tCKE.ck, PS2CYCLES_ROUNDUP(para->tCKE.ps)); + + /* self-refresh timings (keep below power-down timings, as tCKESR needs to + be calculated based on the nCK value of tCKE) */ + const u32 tXS = MAX(para->tXS.ck, PS2CYCLES_ROUNDUP(para->tXS.ps)); + const u32 tXSDLL = para->tXSDLL; + const u32 tCKSRE = MAX(para->tCKSRE.ck, PS2CYCLES_ROUNDUP(para->tCKSRE.ps)); + const u32 tCKESR = tCKE + 1; + const u32 tCKSRX = MAX(para->tCKSRX.ck, PS2CYCLES_ROUNDUP(para->tCKSRX.ps)); + + /* write leveling timings */ + const u32 tWLMRD = para->tWLMRD; + // const u32 tWLDQSEN = para->tWLDQSEN; + const u32 tWLO = PS2CYCLES_FLOOR(para->tWLO); + // const u32 tWLOE = PS2CYCLES_FLOOR(para->tWLOE); + + const u32 tRASmax = tREFI * 9; + int i; + + for (i = 0; i < para->cl_cwl_numentries; ++i) { + const u32 tCK = 1000000 / CONFIG_DRAM_CLK; + if ((para->cl_cwl_table[i].tCKmin <= tCK) + && (tCK < para->cl_cwl_table[i].tCKmax)) { + CL = para->cl_cwl_table[i].CL; + CWL = para->cl_cwl_table[i].CWL; + + debug("found CL/CWL: CL = %d, CWL = %d\n", CL, CWL); + break; + } + } + + if ((CL == 0) && (CWL == 0)) { + printf("failed to find valid CL/CWL for operating point %d MHz\n", CONFIG_DRAM_CLK); + return 0; + } + + if (ch_index == 0) { + mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; + } else { + mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL1_BASE; + mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE; + } + + if (para->dram_type == DRAM_TYPE_DDR3) { + mr[0] = DDR3_MR0_PPD_FAST_EXIT | DDR3_MR0_WR(tWR) | DDR3_MR0_CL(CL); + mr[1] = DDR3_MR1_RTT120OHM; + mr[2] = DDR3_MR2_TWL(CWL); + mr[3] = 0; + + /* DRAM3 initialisation requires holding CKE LOW for + at least 500us prior to starting the initialisation + sequence and at least 10ns after driving CKE HIGH + before the initialisation sequence may be started). + + Refer to Micron document "TN-41-07: DDR3 Power-Up, + Initialization, and Reset DDR3 Initialization + Routine" for details). */ + writel(MCTL_INIT0_POST_CKE_x1024(1) + | MCTL_INIT0_PRE_CKE_x1024((500*CONFIG_DRAM_CLK + 1023)/1024), /* 500us */ + &mctl_ctl->init[0]); + writel(MCTL_INIT1_DRAM_RSTN_x1024(1), + &mctl_ctl->init[1]); + // INIT2 is not used for DDR3 + writel(MCTL_INIT3_MR(mr[0]) | MCTL_INIT3_EMR(mr[1]), + &mctl_ctl->init[3]); + writel(MCTL_INIT4_EMR2(mr[2]) | MCTL_INIT4_EMR3(mr[3]), + &mctl_ctl->init[4]); + writel(MCTL_INIT5_DEV_ZQINIT_x32(512/32), /* 512 cycles */ + &mctl_ctl->init[5]); + } else { +#if 0 /* UNTESTED */ + /* LPDDR2 and/or LPDDR3 require a 200us minimum delay + after driving CKE HIGH in the initialisation + sequence. */ + writel(MCTL_INIT0_POST_CKE_x1024((200*CONFIG_DRAM_CLK + 1023)/1024), + &mctl_ctl->init[0]); + writel(MCTL_INIT1_DRAM_RSTN_x1024(1), + &mctl_ctl->init[1]); + writel(MCTL_INIT2_IDLE_AFTER_RESET_x32((CONFIG_DRAM_CLK + 31)/32) /* 1us */ + | MCTL_INIT2_MIN_STABLE_CLOCK_x1(5), /* 5 cycles */ + &mctl_ctl->init[2]); + writel(MCTL_INIT3_MR(mr[1]) | MCTL_INIT3_EMR(mr[2]), + &mctl_ctl->init[3]); + writel(MCTL_INIT4_EMR2(mr[3]), + &mctl_ctl->init[4]); + writel(MCTL_INIT5_DEV_ZQINIT_x32((CONFIG_DRAM_CLK + 31)/32) /* 1us */ + | MCTL_INIT5_MAX_AUTO_INIT_x1024((10 * CONFIG_DRAM_CLK + 1023)/1024), + &mctl_ctl->init[5]); +#endif + } + + /* (DDR3) We always use a burst-length of 8. */ +#define MCTL_BL 8 + /* wr2pre: WL + BL/2 + tWR */ +#define WR2PRE (MCTL_BL/2 + CWL + tWTR) + /* wr2rd = CWL + BL/2 + tWTR */ +#define WR2RD (MCTL_BL/2 + CWL + tWTR) + /* + * rd2wr = RL + BL/2 + 2 - WL (for DDR3) + * rd2wr = RL + BL/2 + RU(tDQSCKmax/tCK) + 1 - WL (for LPDDR2/LPDDR3) + */ +#define RD2WR (CL + MCTL_BL/2 + 2 - CWL) +#define MCTL_PHY_TRTW 0 +#define MCTL_PHY_TRTODT 0 + +#define MCTL_DIV2(n) ((n + 1)/2) +#define MCTL_DIV32(n) (n/32) +#define MCTL_DIV1024(n) (n/1024) + + writel((MCTL_DIV2(WR2PRE) << 24) | (MCTL_DIV2(tFAW) << 16) | (MCTL_DIV1024(tRASmax) << 8) | (MCTL_DIV2(tRAS) << 0), + &mctl_ctl->dramtmg[0]); + writel((MCTL_DIV2(tXP) << 16) | (MCTL_DIV2(tRTP) << 8) | (MCTL_DIV2(tRC) << 0), + &mctl_ctl->dramtmg[1]); + writel((MCTL_DIV2(CWL) << 24) | (MCTL_DIV2(CL) << 16) | (MCTL_DIV2(RD2WR) << 8) | (MCTL_DIV2(WR2RD) << 0), + &mctl_ctl->dramtmg[2]); + /* Note: tMRW is located at bit 16 (and up) in DRAMTMG3... this is only relevant for LPDDR2/LPDDR3 */ + writel((MCTL_DIV2(tMRD) << 12) | (MCTL_DIV2(tMOD) << 0), + &mctl_ctl->dramtmg[3]); + writel((MCTL_DIV2(tRCD) << 24) | (MCTL_DIV2(tCCD) << 16) | (MCTL_DIV2(tRRD) <<8) | (MCTL_DIV2(tRP) << 0), + &mctl_ctl->dramtmg[4]); + writel((MCTL_DIV2(tCKSRX) << 24) | (MCTL_DIV2(tCKSRE) << 16) + | (MCTL_DIV2(tCKESR) << 8) | (MCTL_DIV2(tCKE) << 0), + &mctl_ctl->dramtmg[5]); + + /* These timings are relevant for LPDDR2/LPDDR3 only */ + // writel((MCTL_TCKDPDE << 24) | (MCTL_TCKDPX << 16) | (MCTL_TCKCSX << 0), + // &mctl_ctl->dramtmg[6]); +#if 0 + printf("DRAMTMG7 reset value: 0x%x\n", readl(&mctl_ctl->dramtmg[7])); + // DRAMTMG7 reset value: 0x202 + // DRAMTMG7 should contain t_ckpde and t_ckpdx: check reset values!!! + printf("DRAMTMG8 reset value: 0x%x\n", readl(&mctl_ctl->dramtmg[8])); + // DRAMTMG8 reset value: 0x44 +#endif + writel((MCTL_DIV32(tXSDLL) << 0), &mctl_ctl->dramtmg[8]); + + writel((MCTL_DIV32(tREFI) << 16) | (MCTL_DIV2(tRFC) << 0), &mctl_ctl->rfshtmg); + + if (para->dram_type == DRAM_TYPE_DDR3) { + writel((2 << 24) | ((MCTL_DIV2(CL) - 2) << 16) + | (1 << 8) | ((MCTL_DIV2(CWL) - 2) << 0), + &mctl_ctl->dfitmg[0]); + } else { + /* TODO */ + } + + /* TODO: handle the case of the write latency domain going to 0 ... */ + + /* Disable dfi_init_complete_en (the triggering of the SDRAM + initialisation when the PHY initialisation completes). */ + clrbits_le32(&mctl_ctl->dfimisc, MCTL_DFIMISC_DFI_INIT_COMPLETE_EN); + /* Disable the automatic generation of DLL calibration requests */ + setbits_le32(&mctl_ctl->dfiupd[0], MCTL_DFIUPD0_DIS_AUTO_CTRLUPD); + + /* A80-Q7: + 2T, 1 rank, DDR3, full-32bit-DQ + */ + /* TODO: make 2T and BUSWIDTH configurable */ + writel(MCTL_MSTR_DEVICETYPE(para->dram_type) | MCTL_MSTR_BURSTLENGTH(para->dram_type) + | MCTL_MSTR_ACTIVERANKS(para->rank) | MCTL_MSTR_2TMODE | MCTL_MSTR_BUSWIDTH32, + &mctl_ctl->mstr); + + if (para->dram_type == DRAM_TYPE_DDR3) { + writel(MCTL_ZQCTRL0_TZQCL(MCTL_DIV2(tZQoper)) + | MCTL_ZQCTRL0_TZQCS(MCTL_DIV2(tZQCS)), + &mctl_ctl->zqctrl[0]); + /* TODO: is the following really necessary as the + bottom half should already be 0x100 and the upper + half should be ignored for a DDR3 device??? */ + writel(MCTL_ZQCTRL1_TZQSI_x1024(0x100), + &mctl_ctl->zqctrl[1]); + } else { + writel(MCTL_ZQCTRL0_TZQCL(0x200) | MCTL_ZQCTRL0_TZQCS(0x40), + &mctl_ctl->zqctrl[0]); + writel(MCTL_ZQCTRL1_TZQRESET(0x28) | MCTL_ZQCTRL1_TZQSI_x1024(0x100), + &mctl_ctl->zqctrl[1]); + } + + /* Assert dfi_init_complete signal */ + setbits_le32(&mctl_ctl->dfimisc, MCTL_DFIMISC_DFI_INIT_COMPLETE_EN); + /* Disable auto-refresh */ + setbits_le32(&mctl_ctl->rfshctl3, MCTL_RFSHCTL3_DIS_AUTO_REFRESH); + + /* PHY initialisation */ + + /* TODO: make 2T and 8-bank mode configurable */ + writel(MCTL_PHY_DCR_BYTEMASK | MCTL_PHY_DCR_2TMODE + | MCTL_PHY_DCR_DDR8BNK | MCTL_PHY_DRAMMODE_DDR3, + &mctl_phy->dcr); + + if (para->dram_type != DRAM_TYPE_DDR3) { + /* For LPDDR2 or LPDDR3, set DQSGX to 0 before training. */ + clrbits_le32(&mctl_phy->dsgcr, (3 << 6)); + } + + writel(mr[0], &mctl_phy->mr0); + writel(mr[1], &mctl_phy->mr1); + writel(mr[2], &mctl_phy->mr2); + writel(mr[3], &mctl_phy->mr3); + + /* The DFI PHY is running at full rate. We thus use the actual + timings in clock cycles here. */ + writel((tRC << 26) | (tRRD << 22) | (tRAS << 16) + | (tRCD << 12) | (tRP << 8) | (tWTR << 4) + | (tRTP << 0), + &mctl_phy->dtpr[0]); + writel((tMRD << 0) | ((tMOD - 12) << 2) | (tFAW << 5) + | (tRFC << 11) | (tWLMRD << 20) | (tWLO << 26) , + &mctl_phy->dtpr[1]); + writel((tXS << 0) | (MAX(tXP, tXPDLL) << 10) | (tCKE << 15) + | (tDLLK << 19)| (MCTL_PHY_TRTODT << 29) | (MCTL_PHY_TRTW << 30) + | (((tCCD - 4) & 0x1) << 31), + &mctl_phy->dtpr[2]); + + /* tDQSCK and tDQSCKmax are used LPDDR2/LPDDR3 */ + // writel((tDQSCK << 0) | (tDQSCKMAX << 3), &mctl_phy->dtpr[3]); + + /* We use the same values used by Allwinner's Boot0 for the PTR (PHY timing register) + configuration that is tied to the PHY implementation. */ + writel(0x42C21590, &mctl_phy->ptr[0]); + writel(0xD05612C0, &mctl_phy->ptr[1]); + if (para->dram_type == DRAM_TYPE_DDR3) { + const unsigned int tdinit0 = 500 * CONFIG_DRAM_CLK; /* 500us */ + const unsigned int tdinit1 = (360 * CONFIG_DRAM_CLK + 999)/1000; /* 360ns */ + const unsigned int tdinit2 = 200 * CONFIG_DRAM_CLK; /* 200us */ + const unsigned int tdinit3 = CONFIG_DRAM_CLK; /* 1us */ + + writel((tdinit1 << 20) | tdinit0, &mctl_phy->ptr[3]); + writel((tdinit3 << 18) | tdinit2, &mctl_phy->ptr[4]); + } else { + /* LPDDR2 or LPDDR3 */ + const unsigned int tdinit0 = (100 * CONFIG_DRAM_CLK + 999)/1000; /* 100ns */ + const unsigned int tdinit1 = 200 * CONFIG_DRAM_CLK; /* 200us */ + const unsigned int tdinit2 = 22 * CONFIG_DRAM_CLK; /* 11us */ + const unsigned int tdinit3 = 2 * CONFIG_DRAM_CLK; /* 2us */ + + writel((tdinit1 << 20) | tdinit0, &mctl_phy->ptr[3]); + writel((tdinit3 << 18) | tdinit2, &mctl_phy->ptr[4]); + } + +#if 1 /* TEST ME */ + writel(0x00203131, &mctl_phy->acmdlr); +#endif + + /* TODO: can we enable this for 2 ranks, even when we don't know yet */ + writel(MCTL_DTCR_DEFAULT | MCTL_DTCR_RANKEN(para->rank), &mctl_phy->dtcr); + + /* TODO: half width */ + debug("DX2GCR0 reset: 0x%x\n", readl(&mctl_phy->dx[2].gcr[0])); + writel(0x7C000285, &mctl_phy->dx[2].gcr[0]); + writel(0x7C000285, &mctl_phy->dx[3].gcr[0]); + + clrsetbits_le32(&mctl_phy->zq[0].pr, 0xff, (CONFIG_DRAM_ZQ >> 0) & 0xff); /* CK/CA */ + clrsetbits_le32(&mctl_phy->zq[1].pr, 0xff, (CONFIG_DRAM_ZQ >> 8) & 0xff); /* DX0/DX1 */ + clrsetbits_le32(&mctl_phy->zq[2].pr, 0xff, (CONFIG_DRAM_ZQ >> 16) & 0xff); /* DX2/DX3 */ + + /* TODO: make configurable & implement non-ODT path */ + if (1) { + int lane; + for (lane = 0; lane < 4; ++lane) { + clrbits_le32(&mctl_phy->dx[lane].gcr[2], 0xffff); + clrbits_le32(&mctl_phy->dx[lane].gcr[3], (0x3<<12) | (0x3<<4)); + } + } else { + /* TODO: check */ + int lane; + for (lane = 0; lane < 4; ++lane) { + clrsetbits_le32(&mctl_phy->dx[lane].gcr[2], 0xffff, 0xaaaa); + if (para->dram_type == DRAM_TYPE_DDR3) + setbits_le32(&mctl_phy->dx[lane].gcr[3], (0x3<<12) | (0x3<<4)); + else + setbits_le32(&mctl_phy->dx[lane].gcr[3], 0x00000012); + } + } + + writel(0x04058D02, &mctl_phy->zq[0].cr); /* CK/CA */ + writel(0x04058D02, &mctl_phy->zq[1].cr); /* DX0/DX1 */ + writel(0x04058D02, &mctl_phy->zq[2].cr); /* DX2/DX3 */ + + /* Disable auto-refresh prior to data training */ + setbits_le32(&mctl_ctl->rfshctl3, MCTL_RFSHCTL3_DIS_AUTO_REFRESH); + + setbits_le32(&mctl_phy->dsgcr, 0xf << 24); /* unclear what this is... */ + /* TODO: IODDRM (IO DDR-MODE) for DDR3L */ + clrsetbits_le32(&mctl_phy->pgcr[1], MCTL_PGCR1_ZCKSEL_MASK, + MCTL_PGCR1_IODDRM_DDR3 | MCTL_PGCR1_INHVT_EN); + + setbits_le32(&mctl_phy->pllcr, 0x3 << 19); /* PLL frequency select */ + /* TODO: single-channel PLL mode??? missing */ + setbits_le32(&mctl_phy->pllcr, MCTL_PLLGCR_PLL_BYPASS | MCTL_PLLGCR_PLL_POWERDOWN); + // setbits_le32(&mctl_phy->pir, MCTL_PIR_PLL_BYPASS); /* included below */ + + /* Disable VT compensation */ + clrbits_le32(&mctl_phy->pgcr[0], 0x3f); + + /* TODO: "other" PLL mode ... 0x20000 seems to be the PLL Bypass */ + if (para->dram_type == DRAM_TYPE_DDR3) + clrsetbits_le32(&mctl_phy->pir, MCTL_PIR_MASK, 0x20df3); + else + clrsetbits_le32(&mctl_phy->pir, MCTL_PIR_MASK, 0x2c573); + + sdelay(10000); // necessary? + + /* Wait for the INIT bit to clear itself... */ + while ((readl(&mctl_phy->pir) & MCTL_PIR_INIT) != MCTL_PIR_INIT) + { + /* not done yet -- keep spinning */ + debug("MCTL_PIR_INIT not set\n"); + sdelay(1000); + /* TODO: implement timeout */ + } + + /* TODO: not used --- there's a "2rank debug" section here */ + +#if 0 + + if((para->dram_type) == 6 || (para->dram_type) == 7) //LPDDR2 and LPDDR3 + { + reg_val = mctl_read_w(P0_DSGCR + ch_offset); + reg_val &= (~(0x3<<6)); //set DQSGX to 1 + reg_val |= (0x1<<6); //dqs gate extend + mctl_write_w(P0_DSGCR + ch_offset, reg_val); + dram_dbg("DQS Gate Extend Enable!\n",ch_index); + } + + //***************************************************************************** + //Disable ZCAL after initial--for nand dma debug--20140330 by YSZ + //***************************************************************************** + if( para->dram_tpr13 & (0x1<<31) ) + { + reg_val = mctl_read_w(P0_ZQ0CR + ch_offset); + reg_val |= (0x7<<11); + mctl_write_w(P0_ZQ0CR + ch_offset, reg_val); + } +#endif + /* TODO: more 2-rank support (setting the "dqs gate delay to average between 2rank") */ + + /* check if any errors are set */ + if( readl(&mctl_phy->pgsr[0]) & MCTL_PGSR0_ERRORS ) + { + debug("Channel %d unavailable!\n",ch_index); + return 0; + } + else //initial OK + { + debug("Channel %d OK!\n",ch_index); + //return 1; + } + + while ((readl(&mctl_ctl->stat) & 0x1) != 0x1) { + debug("Waiting for INIT to be done (controller to come up into 'normal operating' mode\n"); + sdelay(100000); + /* init not done */ + /* TODO: implement time-out */ + } + debug("done\n"); + + /* "DDR is controller by contoller" */ + clrbits_le32(&mctl_phy->pgcr[3], (1 << 25)); +#if 1 + /* TODO: is the following necessary? */ + debug("DFIMISC before writing 0: 0x%x\n", readl(&mctl_ctl->dfimisc)); + writel(0, &mctl_ctl->dfimisc); +#endif + + /* Enable auto-refresh */ + clrbits_le32(&mctl_ctl->rfshctl3, MCTL_RFSHCTL3_DIS_AUTO_REFRESH); + + debug("channel_init complete\n"); + return 1; +} + + +signed int DRAMC_get_dram_size(void) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + + unsigned int reg_val; + unsigned int dram_size; + unsigned int temp; + + reg_val = readl(&mctl_com->cr); + + temp = (reg_val>>8) & 0xf; //page size code + dram_size = (temp - 6); //(1<<dram_size) * 512Bytes + + temp = (reg_val>>4) & 0xf; //row width code + dram_size += (temp + 1); //(1<<dram_size) * 512Bytes + + temp = (reg_val>>2) & 0x3; //bank number code + dram_size += (temp + 2); //(1<<dram_size) * 512Bytes + + temp = reg_val & 0x3; //rank number code + dram_size += temp; //(1<<dram_size) * 512Bytes + + temp = (reg_val>>19) & 0x1; //channel number code + dram_size += temp; //(1<<dram_size) * 512Bytes + + dram_size = dram_size - 11; //(1<<dram_size)MBytes + + return (1<<dram_size); +} + + +unsigned long sunxi_dram_init(void) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + + struct dram_sun9i_cl_cwl_timing cl_cwl[] = { + { .CL = 5, .CWL = 5, .tCKmin = 3000, .tCKmax = 3300 }, + { .CL = 6, .CWL = 5, .tCKmin = 2500, .tCKmax = 3300 }, + { .CL = 8, .CWL = 6, .tCKmin = 1875, .tCKmax = 2500 }, + { .CL = 10, .CWL = 7, .tCKmin = 1500, .tCKmax = 1875 }, + { .CL = 11, .CWL = 8, .tCKmin = 1250, .tCKmax = 1500 } + }; + + /* Set initial parameters, these get modified by the autodetect code */ + struct dram_sun9i_para para = { + .dram_type = DRAM_TYPE_DDR3, + .bus_width = 32, + .chan = 2, + .rank = 1, + // .rank = 2, + .page_size = 4096, + // .rows = 16, + .rows = 15, + + /* CL/CWL table for the speed bin */ + .cl_cwl_table = cl_cwl, + .cl_cwl_numentries = sizeof(cl_cwl) / sizeof(struct dram_sun9i_cl_cwl_timing), + + /* timings */ + .tREFI = 7800, /* 7.8us (up to 85 degC) */ + .tRFC = 260, /* 260ns for 4GBit devices */ // 350ns @ 8GBit + + .tRCD = 13750, + .tRP = 13750, + .tRC = 48750, + .tRAS = 35000, + + .tDLLK = 512, + .tRTP = { .ck = 4, .ps = 7500 }, + .tWTR = { .ck = 4, .ps = 7500 }, + .tWR = 15, + .tMRD = 4, + .tMOD = { .ck = 12, .ps = 15000 }, + .tCCD = 4, + .tRRD = { .ck = 4, .ps = 7500 }, + .tFAW = 40, + + /* calibration timing */ + // .tZQinit = { .ck = 512, .ps = 640000 }, + .tZQoper = { .ck = 256, .ps = 320000 }, + .tZQCS = { .ck = 64, .ps = 80000 }, + + /* reset timing */ + // .tXPR = { .ck = 5, .ps = 10000 }, + + /* self-refresh timings */ + .tXS = { .ck = 5, .ps = 10000 }, + .tXSDLL = 512, + .tCKSRE = { .ck = 5, .ps = 10000 }, + .tCKSRX = { .ck = 5, .ps = 10000 }, + + /* power-down timings */ + .tXP = { .ck = 3, .ps = 6000 }, + .tXPDLL = { .ck = 10, .ps = 24000 }, + .tCKE = { .ck = 3, .ps = 5000 }, + + /* write leveling timings */ + .tWLMRD = 40, + // .tWLDQSEN = 25, + .tWLO = 7500, + // .tWLOE = 2000; + }; + + /* Disable A80 internal 240 ohm resistor. + This code sequence is adapated from Allwinner's Boot0 (see + https://github.com/allwinner-zh/bootloader.git), as there + is no documentation for these two registers in the R_PRCM + block. */ + setbits_le32(SUNXI_PRCM_BASE + 0x1e0, (0x3 << 8)); + writel(0, SUNXI_PRCM_BASE + 0x1e8); + + mctl_sys_init(); + + if (!mctl_channel_init(0, ¶)) + return 0; + + /* dual-channel */ + if (!mctl_channel_init(1, ¶)) { + /* disable channel 1 */ + clrsetbits_le32(&mctl_com->cr, MCTL_CR_CHANNEL_MASK, MCTL_CR_CHANNEL_SINGLE); + /* disable channel 1 global clock */ + clrbits_le32(&mctl_com->cr, MCTL_CCR_CH1_CLK_EN); + } + + mctl_com_init(¶); + +#if 0 + printf("Testing memory accesses...\n"); + { + unsigned int* start = (unsigned int*)0x20000000; + unsigned int i; + +#define TESTLEN 0x100 + + // printf("writing... "); + for (i = 0; i < TESTLEN; ++i) + { + printf("w %x", (u32)&start[i]); + start[i] = i; + printf("+\n"); + } + // printf("done\n"); + + // printf("reading (& comparing)... \n"); + for (i = 0; i < TESTLEN; ++i) + { + printf("r %x", (u32)&start[i]); + if (start[i] != i) + printf("mismatch @0x%x (0x%x != 0x%x)\n", (u32)&start[i], start[i], i); + printf("+\n"); + } + printf("done\n"); + } +#endif + + /* return the proper RAM size */ + // return 1 << (para.rank + para.rows + bank + columns + para.chan + bus); + return DRAMC_get_dram_size() << 20; + // return 0; +} + +#if 0 +static int sun9i_dramc_probe(struct udevice *dev) +{ + struct dram_info *priv = dev_get_priv(dev); + struct regmap *map; + int ret; + + const void *blob = gd->fdt_blob; + int node = dev->of_offset; + int ddr_speed_bin; + + printf("sun9i_dramc_probe CALLED\n"); + ddr_speed_bin = fdtdec_get_int(blob, node, + "allwinner,ddr-speed-bin", 1); + + printf("allwinner,ddr-speed-bin: %d\n", ddr_speed_bin); + return 0; +} + +static int sun9i_dramc_get_info(struct udevice *dev, struct ram_info *info) +{ + // struct dram_info *priv = dev_get_priv(dev); + + // *info = priv->info; + + return 0; +} + +static struct ram_ops sun9i_dramc_ops = { + .get_info = sun9i_dramc_get_info, +}; + +static const struct udevice_id sun9i_dramc_ids[] = { + { .compatible = "allwinner,sun9i-dramc" }, + { } +}; + +U_BOOT_DRIVER(sun9i_dramc) = { + .name = "sun9i_dramc", + .id = UCLASS_RAM, + .of_match = sun9i_dramc_ids, + .ops = &sun9i_dramc_ops, + .probe = sun9i_dramc_probe, + .priv_auto_alloc_size = sizeof(struct dram_sun9i_para), +}; +#endif diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun9i.h b/arch/arm/include/asm/arch-sunxi/clock_sun9i.h index a61934fb36..810313c5c3 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun9i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun9i.h @@ -37,57 +37,61 @@ struct sunxi_ccm_reg { u8 reserved3[0x04]; /* 0x7c */ u32 ats_cfg; /* 0x80 ats clock configuration */ u32 trace_cfg; /* 0x84 trace clock configuration */ - u8 reserved4[0xf8]; /* 0x88 */ + u8 reserved4[0x14]; /* 0x88 */ + u32 pll_stable_status; /* 0x9c */ + u8 reserved5[0xe0]; /* 0xa0 */ u32 clk_output_a; /* 0x180 clk_output_a */ u32 clk_output_b; /* 0x184 clk_output_a */ - u8 reserved5[0x278]; /* 0x188 */ + u8 reserved6[0x278]; /* 0x188 */ u32 nand0_clk_cfg; /* 0x400 nand0 clock configuration0 */ u32 nand0_clk_cfg1; /* 0x404 nand1 clock configuration */ - u8 reserved6[0x08]; /* 0x408 */ + u8 reserved7[0x08]; /* 0x408 */ u32 sd0_clk_cfg; /* 0x410 sd0 clock configuration */ u32 sd1_clk_cfg; /* 0x414 sd1 clock configuration */ u32 sd2_clk_cfg; /* 0x418 sd2 clock configuration */ u32 sd3_clk_cfg; /* 0x41c sd3 clock configuration */ - u8 reserved7[0x08]; /* 0x420 */ + u8 reserved8[0x08]; /* 0x420 */ u32 ts_clk_cfg; /* 0x428 transport stream clock cfg */ u32 ss_clk_cfg; /* 0x42c security system clock cfg */ u32 spi0_clk_cfg; /* 0x430 spi0 clock configuration */ u32 spi1_clk_cfg; /* 0x434 spi1 clock configuration */ u32 spi2_clk_cfg; /* 0x438 spi2 clock configuration */ u32 spi3_clk_cfg; /* 0x43c spi3 clock configuration */ - u8 reserved8[0x50]; /* 0x440 */ + u8 reserved9[0x44]; /* 0x440 */ + u32 dram_clk_cfg; /* 0x484 DRAM (controller) clock configuration */ + u8 reserved10[0x8]; /* 0x488 */ u32 de_clk_cfg; /* 0x490 display engine clock configuration */ - u8 reserved9[0x04]; /* 0x494 */ + u8 reserved11[0x04]; /* 0x494 */ u32 mp_clk_cfg; /* 0x498 mp clock configuration */ u32 lcd0_clk_cfg; /* 0x49c LCD0 module clock */ u32 lcd1_clk_cfg; /* 0x4a0 LCD1 module clock */ - u8 reserved10[0x1c]; /* 0x4a4 */ + u8 reserved12[0x1c]; /* 0x4a4 */ u32 csi_isp_clk_cfg; /* 0x4c0 CSI ISP module clock */ u32 csi0_clk_cfg; /* 0x4c4 CSI0 module clock */ u32 csi1_clk_cfg; /* 0x4c8 CSI1 module clock */ u32 fd_clk_cfg; /* 0x4cc FD module clock */ u32 ve_clk_cfg; /* 0x4d0 VE module clock */ u32 avs_clk_cfg; /* 0x4d4 AVS module clock */ - u8 reserved11[0x18]; /* 0x4d8 */ + u8 reserved13[0x18]; /* 0x4d8 */ u32 gpu_core_clk_cfg; /* 0x4f0 GPU core clock config */ u32 gpu_mem_clk_cfg; /* 0x4f4 GPU memory clock config */ u32 gpu_axi_clk_cfg; /* 0x4f8 GPU AXI clock config */ - u8 reserved12[0x10]; /* 0x4fc */ + u8 reserved14[0x10]; /* 0x4fc */ u32 gp_adc_clk_cfg; /* 0x50c General Purpose ADC clk config */ - u8 reserved13[0x70]; /* 0x510 */ + u8 reserved15[0x70]; /* 0x510 */ u32 ahb_gate0; /* 0x580 AHB0 Gating Register */ u32 ahb_gate1; /* 0x584 AHB1 Gating Register */ u32 ahb_gate2; /* 0x588 AHB2 Gating Register */ - u8 reserved14[0x04]; /* 0x58c */ + u8 reserved16[0x04]; /* 0x58c */ u32 apb0_gate; /* 0x590 APB0 Clock Gating Register */ u32 apb1_gate; /* 0x594 APB1 Clock Gating Register */ - u8 reserved15[0x08]; /* 0x598 */ + u8 reserved17[0x08]; /* 0x598 */ u32 ahb_reset0_cfg; /* 0x5a0 AHB0 Software Reset Register */ u32 ahb_reset1_cfg; /* 0x5a4 AHB1 Software Reset Register */ u32 ahb_reset2_cfg; /* 0x5a8 AHB2 Software Reset Register */ - u8 reserved16[0x04]; /* 0x5ac */ + u8 reserved18[0x04]; /* 0x5ac */ u32 apb0_reset_cfg; /* 0x5b0 Bus Software Reset Register 3 */ u32 apb1_reset_cfg; /* 0x5b4 Bus Software Reset Register 4 */ }; @@ -112,6 +116,8 @@ struct sunxi_ccm_reg { #define CCM_MMC_CTRL_ENABLE (1 << 31) /* ahb_gate0 fields */ +#define AHB_GATE_OFFSET_MCTL 14 + /* On sun9i all sdc-s share their ahb gate, so ignore (x) */ #define AHB_GATE_OFFSET_NAND0 13 #define AHB_GATE_OFFSET_MMC(x) 8 @@ -126,6 +132,8 @@ struct sunxi_ccm_reg { #define APB1_GATE_TWI_MASK (0xf << APB1_GATE_TWI_SHIFT) /* ahb_reset0_cfg fields */ +#define AHB_RESET_OFFSET_MCTL 14 + /* On sun9i all sdc-s share their ahb reset, so ignore (x) */ #define AHB_RESET_OFFSET_MMC(x) 8 diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h index 04889c51fa..00ffeca553 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h @@ -38,6 +38,12 @@ #define SUNXI_ARMA9_GIC_BASE (REGS_AHB0_BASE + 0x41000) #define SUNXI_ARMA9_CPUIF_BASE (REGS_AHB0_BASE + 0x42000) +#define SUNXI_DRAM_COM_BASE (REGS_AHB0_BASE + 0x62000) +#define SUNXI_DRAM_CTL0_BASE (REGS_AHB0_BASE + 0x63000) +#define SUNXI_DRAM_CTL1_BASE (REGS_AHB0_BASE + 0x64000) +#define SUNXI_DRAM_PHY0_BASE (REGS_AHB0_BASE + 0x65000) +#define SUNXI_DRAM_PHY1_BASE (REGS_AHB0_BASE + 0x66000) + /* AHB1 Module */ #define SUNXI_DMA_BASE (REGS_AHB1_BASE + 0x002000) #define SUNXI_USBOTG_BASE (REGS_AHB1_BASE + 0x100000) diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h index 675876ff6c..e0be744dba 100644 --- a/arch/arm/include/asm/arch-sunxi/dram.h +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -26,6 +26,8 @@ #include <asm/arch/dram_sun8i_a83t.h> #elif defined(CONFIG_MACH_SUN8I_H3) #include <asm/arch/dram_sun8i_h3.h> +#elif defined(CONFIG_MACH_SUN9I) +#include <asm/arch/dram_sun9i.h> #else #include <asm/arch/dram_sun4i.h> #endif diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun9i.h b/arch/arm/include/asm/arch-sunxi/dram_sun9i.h new file mode 100644 index 0000000000..0e405c3e52 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram_sun9i.h @@ -0,0 +1,275 @@ +/* + * Sun8i platform dram controller register and constant defines + * + * (C) Copyright 2007-2015 Allwinner Technology Co. + * Jerry Wang <wangflord@allwinnertech.com> + * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH + * Philipp Tomsich <philipp.tomsich@theobroma-systems.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DRAM_SUN9I_H +#define _SUNXI_DRAM_SUN9I_H + +struct sunxi_mctl_com_reg { + u32 cr; /* 0x00 */ + u32 ccr; /* 0x04 controller configuration register */ + u32 dbgcr; /* 0x08 */ + u32 dbgcr1; /* 0x0c */ + u32 rmcr; /* 0x10 */ + u8 res1[0x1c]; /* 0x14 */ + u32 mmcr; /* 0x30 */ + u8 res2[0x3c]; /* 0x34 */ + u32 mbagcr; /* 0x70 */ + u32 mbacr; /* 0x74 */ + u8 res3[0x10]; /* 0x78 */ + u32 maer; /* 0x88 */ + u8 res4[0x74]; /* 0x8c */ + u32 mdfscr; /* 0x100 */ + u32 mdfsmer; /* 0x104 */ + u32 mdfsmrmr; /* 0x108 */ + u32 mdfstr[4]; /* 0x10c */ + u32 mdfsgcr; /* 0x11c */ + u8 res5[0x1c]; /* 0x120 */ + u32 mdfsivr; /* 0x13c */ + u8 res6[0xc]; /* 0x140 */ + u32 mdfstcr; /* 0x14c */ +}; + + +struct sunxi_mctl_ctl_reg { + u32 mstr; /* 0x00 master register */ + u32 stat; /* 0x04 operating mode status register */ + u8 res1[0x8]; /* 0x08 */ + u32 mrctrl[2]; /* 0x10 mode register read/write control register */ + u32 mstat; /* 0x18 mode register read/write status register */ + u8 res2[0x4]; /* 0x1c */ + u32 derateen; /* 0x20 temperature derate enable register */ + u32 derateint; /* 0x24 temperature derate interval register */ + u8 res3[0x8]; /* 0x28 */ + u32 pwrctl; /* 0x30 low power control register */ + u32 pwrtmg; /* 0x34 low power timing register */ + u8 res4[0x18]; /* 0x38 */ + u32 rfshctl0; /* 0x50 refresh control register 0 */ + u32 rfshctl1; /* 0x54 refresh control register 1 */ + u8 res5[0x8]; /* 0x58 */ + u32 rfshctl3; /* 0x60 refresh control register 3 */ + u32 rfshtmg; /* 0x64 refresh timing register */ + u8 res6[0x68]; /* 0x68 */ + u32 init[6]; /* 0xd0 SDRAM initialisation register */ + u8 res7[0xc]; /* 0xe8 */ + u32 rankctl; /* 0xf4 rank control register */ + u8 res8[0x8]; /* 0xf8 */ + u32 dramtmg[9]; /* 0x100 DRAM timing register */ + u8 res9[0x5c]; /* 0x124 */ + u32 zqctrl[3]; /* 0x180 ZQ control register */ + u32 zqstat; /* 0x18c ZQ status register */ + u32 dfitmg[2]; /* 0x190 DFI timing register */ + u32 dfilpcfg; /* 0x198 DFI low power configuration register */ + u8 res10[0x4]; /* 0x19c */ + u32 dfiupd[4]; /* 0x1a0 DFI update register */ + u32 dfimisc; /* 0x1b0 DFI miscellaneous control register */ + u8 res11[0x1c]; /* 0x1b4 */ + u32 trainctl[3]; /* 0x1d0 */ + u32 trainstat; /* 0x1dc */ + u8 res12[0x20]; /* 0x1e0 */ + u32 addrmap[7]; /* 0x200 address map register */ + u8 res13[0x24]; /* 0x21c */ + u32 odtcfg; /* 0x240 ODT configuration register */ + u32 odtmap; /* 0x244 ODT/rank map register */ + u8 res14[0x8]; /* 0x248 */ + u32 sched; /* 0x250 scheduler control register */ + u8 res15[0x4]; /* 0x254 */ + u32 perfhpr0; /* 0x258 high priority read CAM register 0 */ + u32 perfhpr1; /* 0x25c high priority read CAM register 1 */ + u32 perflpr0; /* 0x260 low priority read CAM register 0 */ + u32 perflpr1; /* 0x264 low priority read CAM register 1 */ + u32 perfwr0; /* 0x268 write CAM register 0 */ + u32 perfwr1; /* 0x26c write CAM register 1 */ +}; + + +struct sunxi_mctl_phy_reg { + u8 res0[0x04]; /* 0x00 revision id ??? */ + u32 pir; /* 0x04 PHY initialisation register */ + u32 pgcr[4]; /* 0x08 PHY general configuration register */ + u32 pgsr[2]; /* 0x18 PHY general status register */ + u32 pllcr; /* 0x20 PLL control register */ + u32 ptr[5]; /* 0x24 PHY timing register */ + u32 acmdlr; /* 0x38 AC master delay line register */ + u32 aclcdlr; /* 0x3c AC local calibrated delay line register */ + u32 acbdlr[10]; /* 0x40 AC bit delay line register */ + u32 aciocr[6]; /* 0x68 AC IO configuration register */ + u32 dxccr; /* 0x80 DATX8 common configuration register */ + u32 dsgcr; /* 0x84 DRAM system general config register */ + u32 dcr; /* 0x88 DRAM configuration register */ + u32 dtpr[4]; /* 0x8c DRAM timing parameters register */ + u32 mr0; /* 0x9c mode register 0 */ + u32 mr1; /* 0xa0 mode register 1 */ + u32 mr2; /* 0xa4 mode register 2 */ + u32 mr3; /* 0xa8 mode register 3 */ + u32 odtcr; /* 0xac ODT configuration register */ + u32 dtcr; /* 0xb0 data training configuration register */ + u32 dtar[4]; /* 0xb4 data training address register */ + u32 dtdr[2]; /* 0xc4 data training data register */ + u32 dtedr[2]; /* 0xcc data training eye data register */ + u32 rdimmgcr[2]; /* 0xd4 RDIMM general configuration register */ + u32 rdimmcr[2]; /* 0xdc RDIMM control register */ + u32 gpr[2]; /* 0xe4 general purpose register */ + u32 catr[2]; /* 0xec CA training register */ + u32 dqdsr; /* 0xf4 DQS drift register */ + u8 res1[0xc8]; /* 0xf8 */ + u32 bistrr; /* 0x1c0 BIST run register */ + u32 bistwcr; /* 0x1c4 BIST word count register */ + u32 bistmskr[3]; /* 0x1c8 BIST mask register */ + u32 bistlsr; /* 0x1d4 BIST LFSR seed register */ + u32 bistar[3]; /* 0x1d8 BIST address register */ + u32 bistupdr; /* 0x1e4 BIST user pattern data register */ + u32 bistgsr; /* 0x1e8 BIST general status register */ + u32 bistwer; /* 0x1dc BIST word error register */ + u32 bistber[4]; /* 0x1f0 BIST bit error register */ + u32 bistwcsr; /* 0x200 BIST word count status register */ + u32 bistfwr[3]; /* 0x204 BIST fail word register */ + u8 res2[0x28]; /* 0x210 */ + u32 iovcr[2]; /* 0x238 IO VREF control register */ + struct ddrphy_zq { + u32 cr; /* impedance control register */ + u32 pr; /* impedance control data register */ + u32 dr; /* impedance control data register */ + u32 sr; /* impedance control status register */ + } zq[4]; /* 0x240, 0x250, 0x260, 0x270 */ + struct ddrphy_dx { + u32 gcr[4]; /* DATX8 general configuration register */ + u32 gsr[3]; /* DATX8 general status register */ + u32 bdlr[7]; /* DATX8 bit delay line register */ + u32 lcdlr[3]; /* DATX8 local calibrated delay line register */ + u32 mdlr; /* DATX8 master delay line register */ + u32 gtr; /* DATX8 general timing register */ + u8 res[0x34]; + } dx[4]; /* 0x280, 0x300, 0x380, 0x400 */ +}; + +/* + * DRAM common (sunxi_mctl_com_reg) register constants. + */ +#define MCTL_CR_RANK_MASK (3 << 0) +#define MCTL_CR_RANK(x) (((x) - 1) << 0) +#define MCTL_CR_BANK_MASK (3 << 2) +#define MCTL_CR_BANK(x) ((x) << 2) +#define MCTL_CR_ROW_MASK (0xf << 4) +#define MCTL_CR_ROW(x) (((x) - 1) << 4) +#define MCTL_CR_PAGE_SIZE_MASK (0xf << 8) +#define MCTL_CR_PAGE_SIZE(x) ((fls(x) - 4) << 8) +#define MCTL_CR_BUSW_MASK (3 << 12) +#define MCTL_CR_BUSW16 (1 << 12) +#define MCTL_CR_BUSW32 (3 << 12) +#define MCTL_CR_DRAMTYPE_MASK (7 << 16) +#define MCTL_CR_DRAMTYPE_DDR2 (2 << 16) +#define MCTL_CR_DRAMTYPE_DDR3 (3 << 16) +#define MCTL_CR_DRAMTYPE_LPDDR2 (6 << 16) + +#define MCTL_CR_CHANNEL_MASK ((1 << 22) | (1 << 20) | (1 << 19)) +#define MCTL_CR_CHANNEL_SINGLE (1 << 22) +#define MCTL_CR_CHANNEL_DUAL ((1 << 22) | (1 << 20) | (1 << 19)) + +#define MCTL_CCR_CH0_CLK_EN (1 << 15) +#define MCTL_CCR_CH1_CLK_EN (1 << 31) + +/* post_cke_x1024 [bits 16..25]: Cycles to wait after driving CKE high + to start the SDRAM initialization sequence (in 1024s of cycles). */ +#define MCTL_INIT0_POST_CKE_x1024(n) ((n & 0x0fff) << 16) +/* pre_cke_x1024 [bits 0..11] Cycles to wait after reset before + driving CKE high to start the SDRAM initialization (in 1024s of + cycles) */ +#define MCTL_INIT0_PRE_CKE_x1024(n) ((n & 0x0fff) << 0) +#define MCTL_INIT1_DRAM_RSTN_x1024(n) ((n & 0xff) << 16) +#define MCTL_INIT1_FINAL_WAIT_x32(n) ((n & 0x3f) << 8) +#define MCTL_INIT1_PRE_OCD_x32(n) ((n & 0x0f) << 0) +#define MCTL_INIT2_IDLE_AFTER_RESET_x32(n) ((n & 0xff) << 8) +#define MCTL_INIT2_MIN_STABLE_CLOCK_x1(n) ((n & 0x0f) << 0) +#define MCTL_INIT3_MR(n) ((n & 0xffff) << 16) +#define MCTL_INIT3_EMR(n) ((n & 0xffff) << 0) +#define MCTL_INIT4_EMR2(n) ((n & 0xffff) << 16) +#define MCTL_INIT4_EMR3(n) ((n & 0xffff) << 0) +#define MCTL_INIT5_DEV_ZQINIT_x32(n) ((n & 0x00ff) << 16) +#define MCTL_INIT5_MAX_AUTO_INIT_x1024(n) ((n & 0x03ff) << 0); + +#define MCTL_DFIMISC_DFI_INIT_COMPLETE_EN (1 << 0) +#define MCTL_DFIUPD0_DIS_AUTO_CTRLUPD (1 << 31) + +#define MCTL_MSTR_DEVICETYPE_DDR3 (0b0001) +#define MCTL_MSTR_DEVICETYPE_LPDDR2 (0b0100) +#define MCTL_MSTR_DEVICETYPE_LPDDR3 (0b1000) +#define MCTL_MSTR_DEVICETYPE(type) \ + ((type == DRAM_TYPE_DDR3) ? MCTL_MSTR_DEVICETYPE_DDR3 \ + : ((type == DRAM_TYPE_LPDDR2) ? MCTL_MSTR_DEVICETYPE_LPDDR2 : \ + MCTL_MSTR_DEVICETYPE_LPDDR3)) +#define MCTL_MSTR_BURSTLENGTH4 (0b0010 << 16) +#define MCTL_MSTR_BURSTLENGTH8 (0b0100 << 16) +#define MCTL_MSTR_BURSTLENGTH16 (0b1000 << 16) +#define MCTL_MSTR_BURSTLENGTH(type) \ + ((type == DRAM_TYPE_DDR3) ? MCTL_MSTR_BURSTLENGTH8 \ + : ((type == DRAM_TYPE_LPDDR2) ? MCTL_MSTR_BURSTLENGTH4 : \ + MCTL_MSTR_BURSTLENGTH8)) +#define MCTL_MSTR_ACTIVERANKS(x) (((x == 2) ? 0b11 : 0b01) << 24) +#define MCTL_MSTR_BUSWIDTH8 (0b10 << 12) +#define MCTL_MSTR_BUSWIDTH16 (0b01 << 12) +#define MCTL_MSTR_BUSWIDTH32 (0b00 << 12) +#define MCTL_MSTR_2TMODE (1 << 10) + +#define MCTL_RFSHCTL3_DIS_AUTO_REFRESH (1 << 0) + +#define MCTL_ZQCTRL0_TZQCS(x) (x << 0) +#define MCTL_ZQCTRL0_TZQCL(x) (x << 16) +#define MCTL_ZQCTRL0_ZQCL_DIS (1 << 30) +#define MCTL_ZQCTRL0_ZQCS_DIS (1 << 31) +#define MCTL_ZQCTRL1_TZQRESET(x) (x << 20) +#define MCTL_ZQCTRL1_TZQSI_x1024(x) (x << 0) +#define MCTL_ZQCTRL2_TZRESET_TRIGGER (1 << 0) + +#define MCTL_PHY_DCR_BYTEMASK (1 << 10) +#define MCTL_PHY_DCR_2TMODE (1 << 28) +#define MCTL_PHY_DCR_DDR8BNK (1 << 3) +#define MCTL_PHY_DRAMMODE_DDR3 0b11 +#define MCTL_PHY_DRAMMODE_LPDDR2 0b00 +#define MCTL_PHY_DRAMMODE_LPDDR3 0b01 + +#define MCTL_DTCR_DEFAULT 0x00003007 +#define MCTL_DTCR_RANKEN(n) (((n == 2) ? 0b11 : 0b01) << 24) + +#define MCTL_PGCR1_ZCKSEL_MASK (0b11 << 23) +#define MCTL_PGCR1_IODDRM_MASK (0b11 << 7) +#define MCTL_PGCR1_IODDRM_DDR3 (0b01 << 7) +#define MCTL_PGCR1_IODDRM_DDR3L (0b10 << 7) +#define MCTL_PGCR1_INHVT_EN (1 << 26) + +#define MCTL_PLLGCR_PLL_BYPASS (1 << 31) +#define MCTL_PLLGCR_PLL_POWERDOWN (1 << 29) + +#define MCTL_PIR_PLL_BYPASS (1 << 17) +#define MCTL_PIR_MASK (~(1 << 17)) +#define MCTL_PIR_INIT (1 << 0) + +#define MCTL_PGSR0_ERRORS (0x1ff << 20) + +/* Constants for assembling MR0 */ +#define DDR3_MR0_PPD_FAST_EXIT (1 << 12) +#define DDR3_MR0_WR(n) \ + ( (n <= 8) ? ((n - 4) << 9) : (((n >> 1) & 0x7) << 9) ) +#define DDR3_MR0_CL(n) \ + ( (((n - 4) & 0x7) << 4) | (((n - 4) & 0x8) >> 2) ) +#define DDR3_MR0_BL8 (0b00 << 0) + +#define DDR3_MR1_RTT120OHM ((0 << 9) | (1 << 6) | (0 << 2)) + +#define DDR3_MR2_TWL(n) \ + ( ((n - 5) & 0x7) << 3 ) + +#define MCTL_NS2CYCLES_CEIL(ns) ((ns * (CONFIG_DRAM_CLK / 2) + 999) / 1000) + +#define DRAM_TYPE_DDR3 3 +#define DRAM_TYPE_LPDDR2 6 +#define DRAM_TYPE_LPDDR3 7 + +#endif diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 5e72fac7f9..c37df000c0 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -104,11 +104,13 @@ config DRAM_TYPE config DRAM_CLK int "sunxi dram clock speed" + default 792 if MACH_SUN9I default 312 if MACH_SUN6I || MACH_SUN8I default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I ---help--- - Set the dram clock speed, valid range 240 - 480, must be a multiple - of 24. + Set the dram clock speed, valid range 240 - 480 (prior to sun9i), + must be a multiple of 24. For the sun9i (A80), the tested values + (for DDR3-1600) are 312 to 792. if MACH_SUN5I || MACH_SUN7I config DRAM_MBUS_CLK |