diff options
| -rw-r--r-- | arch/arm/cpu/armv7/tegra2/ap20.c | 22 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-tegra2/tegra2.h | 4 | ||||
| -rw-r--r-- | include/configs/harmony.h | 1 | ||||
| -rw-r--r-- | include/configs/medcom.h | 1 | ||||
| -rw-r--r-- | include/configs/paz00.h | 1 | ||||
| -rw-r--r-- | include/configs/plutux.h | 1 | ||||
| -rw-r--r-- | include/configs/seaboard.h | 1 | ||||
| -rw-r--r-- | include/configs/trimslice.h | 1 | ||||
| -rw-r--r-- | include/configs/ventana.h | 1 | ||||
| -rw-r--r-- | include/configs/whistler.h | 1 |
10 files changed, 25 insertions, 9 deletions
diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c b/arch/arm/cpu/armv7/tegra2/ap20.c index 24e582d95c..1aad3879ee 100644 --- a/arch/arm/cpu/armv7/tegra2/ap20.c +++ b/arch/arm/cpu/armv7/tegra2/ap20.c @@ -314,9 +314,28 @@ void enable_scu(void) writel(reg, &scu->scu_ctrl); } +static u32 get_odmdata(void) +{ + /* + * ODMDATA is stored in the BCT in IRAM by the BootROM. + * The BCT start and size are stored in the BIT in IRAM. + * Read the data @ bct_start + (bct_size - 12). This works + * on T20 and T30 BCTs, which are locked down. If this changes + * in new chips (T114, etc.), we can revisit this algorithm. + */ + + u32 bct_start, odmdata; + + bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR); + odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); + + return odmdata; +} + void init_pmc_scratch(void) { struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + u32 odmdata; int i; /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */ @@ -324,7 +343,8 @@ void init_pmc_scratch(void) writel(0, &pmc->pmc_scratch1+i); /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */ - writel(CONFIG_SYS_BOARD_ODMDATA, &pmc->pmc_scratch20); + odmdata = get_odmdata(); + writel(odmdata, &pmc->pmc_scratch20); #ifdef CONFIG_TEGRA2_LP0 /* save Sdram params to PMC 2, 4, and 24 for WB0 */ diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h b/arch/arm/include/asm/arch-tegra2/tegra2.h index d4ada10ea8..3c8d8a84b5 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra2.h +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h @@ -60,6 +60,10 @@ struct timerus { /* Address at which WB code runs, it must not overlap Bootrom's IRAM usage */ #define AP20_WB_RUN_ADDRESS 0x40020000 +#define NVBOOTINFOTABLE_BCTSIZE 0x38 /* BCT size in BIT in IRAM */ +#define NVBOOTINFOTABLE_BCTPTR 0x3C /* BCT pointer in BIT in IRAM */ +#define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */ + /* These are the available SKUs (product types) for Tegra */ enum { SKU_ID_T20 = 0x8, diff --git a/include/configs/harmony.h b/include/configs/harmony.h index d13ead9909..df5265a5a0 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -48,7 +48,6 @@ #endif #define CONFIG_MACH_TYPE MACH_TYPE_HARMONY -#define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/medcom.h b/include/configs/medcom.h index d3d10550af..bdea7c9c53 100644 --- a/include/configs/medcom.h +++ b/include/configs/medcom.h @@ -31,7 +31,6 @@ /* High-level configuration options */ #define V_PROMPT "Tegra2 (Medcom) # " #define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Medcom" -#define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011 /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 29c368a99e..0dd1e83a50 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 -#define CONFIG_SYS_BOARD_ODMDATA 0x800c0085 /* lp1, 512MB */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/plutux.h b/include/configs/plutux.h index e73be0bf92..6397eb104a 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -31,7 +31,6 @@ /* High-level configuration options */ #define V_PROMPT "Tegra2 (Plutux) # " #define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Plutux" -#define CONFIG_SYS_BOARD_ODMDATA 0x2b2d8011 /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 537ab0e71c..f661583fed 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -53,7 +53,6 @@ #define CONFIG_UART_DISABLE_GPIO GPIO_PI3 #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD -#define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index 915b07ae23..91de348d59 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -43,7 +43,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE -#define CONFIG_SYS_BOARD_ODMDATA 0x300c0011 /* lp?, 1GB, UARTA */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 77a0a14152..5e4d53861c 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_MACH_TYPE MACH_TYPE_VENTANA -#define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 9dafe5cadc..f2952d5f45 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -43,7 +43,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER -#define CONFIG_SYS_BOARD_ODMDATA 0x2B080105 /* lp?, 512MB, UARTA */ #define CONFIG_BOARD_EARLY_INIT_F |