summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/ls102xa/fdt.c19
-rw-r--r--board/freescale/ls1021aqds/ddr.c17
-rw-r--r--board/freescale/ls1021aqds/ls1021aqds.c26
-rw-r--r--include/configs/ls1021aqds.h8
4 files changed, 69 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index e0288b8c3f..71a175392f 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -124,6 +124,25 @@ void ft_cpu_setup(void *blob, bd_t *bd)
do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
+#define UBOOT_HEAD_LEN 0x1000
+ /*
+ * Reserved memory in SD boot deep sleep case.
+ * Second stage uboot binary and malloc space should be reserved.
+ * If the memory they occupied has not been reserved, then this
+ * space would be used by kernel and overwritten in uboot when
+ * deep sleep resume, which cause deep sleep failed.
+ * Since second uboot binary has a head, that space need to be
+ * reserved either(assuming its size is less than 0x1000).
+ */
+ off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN,
+ CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
+ UBOOT_HEAD_LEN);
+ if (off < 0)
+ printf("Failed to reserve memory for SD boot deep sleep: %s\n",
+ fdt_strerror(off));
+#endif
+
#if defined(CONFIG_FSL_ESDHC)
fdt_fixup_esdhc(blob, bd);
#endif
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
index a539ff9791..6435bf9ad1 100644
--- a/board/freescale/ls1021aqds/ddr.c
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -7,6 +7,7 @@
#include <common.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
+#include <asm/io.h>
#include "ddr.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -149,6 +150,17 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
}
#endif
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+ void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+ /* does not provide HW signals for power management */
+ clrbits_8(qixis_base + 0x21, 0x2);
+ udelay(1);
+}
+#endif
+
phys_size_t initdram(int board_type)
{
phys_size_t dram_size;
@@ -159,6 +171,11 @@ phys_size_t initdram(int board_type)
#else
dram_size = fsl_ddr_sdram_size();
#endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+ fsl_dp_resume();
+#endif
+
return dram_size;
}
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index f2dda22df6..20eade4651 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -20,6 +20,7 @@
#include <fsl_sec.h>
#include <spl.h>
+#include "../common/sleep.h"
#include "../common/qixis.h"
#include "ls1021aqds_qixis.h"
#ifdef CONFIG_U_QE
@@ -218,6 +219,11 @@ int board_early_init_f(void)
* allow barrier transaction to DDR again */
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
+#if defined(CONFIG_DEEP_SLEEP)
+ if (is_warm_boot())
+ fsl_dp_disable_console();
+#endif
+
return 0;
}
@@ -251,6 +257,11 @@ void board_init_f(ulong dummy)
get_clocks();
+#if defined(CONFIG_DEEP_SLEEP)
+ if (is_warm_boot())
+ fsl_dp_disable_console();
+#endif
+
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
@@ -544,6 +555,21 @@ int board_init(void)
return 0;
}
+#if defined(CONFIG_DEEP_SLEEP)
+void board_sleep_prepare(void)
+{
+ struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+
+ /* Set CCI-400 control override register to
+ * enable barrier transaction */
+ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_LS102XA_NS_ACCESS
+ enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#endif
+}
+#endif
+
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 296ded9f5e..2874ccc6fa 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -19,6 +19,11 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
+#define CONFIG_SILENT_CONSOLE
+#endif
+
/*
* Size of malloc() pool
*/
@@ -72,7 +77,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SPL_PAD_TO 0x1c000
#define CONFIG_SYS_TEXT_BASE 0x82000000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000