Merge remote branch 'origin/master' into next

3 files changed, 7 insertions, 181 deletions

diff --git a/include/configs/ml300.h b/include/configs/ml300.h
deleted file mode 100644
index 68d0c85e1a..0000000000
--- a/include/configs/ml300.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * ML300.h: ML300 specific config options
- *
- * http://www.xilinx.com/ml300
- *
- * Derived from : ML2.h
- *
- *     Author: Xilinx, Inc.
- *
- *
- *     This program is free software; you can redistribute it and/or modify it
- *     under the terms of the GNU General Public License as published by the
- *     Free Software Foundation; either version 2 of the License, or (at your
- *     option) any later version.
- *
- *
- *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR
- *     OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- *     FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
- *
- *     (c) Copyright 2002 Xilinx Inc.
- *     All rights reserved.
- *
- *
- *     You should have received a copy of the GNU General Public License along
- *     with this program; if not, write to the Free Software Foundation, Inc.,
- *     675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* #define DEBUG */
-/* #define ET_DEBUG 1 */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405		1	/* This is a PPC405 CPU		*/
-#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
-#define CONFIG_XILINX_405	1
-#define CONFIG_XILINX_ML300	1	/* ...on a Xilinx ML300 board	*/
-
-#define CONFIG_SYSTEMACE	1
-#define CONFIG_DOS_PARTITION	1
-#define CONFIG_SYS_SYSTEMACE_BASE	XPAR_OPB_SYSACE_0_BASEADDR
-#define CONFIG_SYS_SYSTEMACE_WIDTH	XPAR_XSYSACE_MEM_WIDTH
-
-#define CONFIG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */
-
-/* following are used only if env is in EEPROM */
-#ifdef	CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR	XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_ENV_OFFSET		XPAR_PERSISTENT_0_IIC_0_BASEADDR
-#define CONFIG_MISC_INIT_R	1	/* used to call out convert_env() */
-#define CONFIG_ENV_OVERWRITE	1	/* allow users to update ethaddr and serial# */
-#endif
-
-#include "../board/xilinx/ml300/xparameters.h"
-
-#define CONFIG_SYS_NO_FLASH		1	/* no flash */
-#define CONFIG_ENV_SIZE		XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-
-#define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command	*/
-
-#define CONFIG_BOOTARGS		"console=ttyS0,9600 ip=off " \
-				"root=/dev/xsysace/disc0/part3 rw"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_NET
-
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_IMLS
-
-
-/* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
-/* 300000000 */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt	*/
-
-#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size	*/
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define CONFIG_SYS_DUART_CHAN		0
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550 1
-#define CONFIG_SYS_INIT_CHAN1	 1
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1 ms ticks */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_MONITOR_BASE	0x04000000
-#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR	0x800000  /* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_END	0x2000	  /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	128	  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	/* Software reboot			*/
-
-#endif				/* __CONFIG_H */
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 8e27ebae9e..4fde012c8f 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -102,6 +102,7 @@
 	at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
 	at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \
 }
+#define I2C_SOFT_DECLARATIONS
 /* Configure data pin as output */
 #define I2C_ACTIVE		at91_set_pio_output(AT91_PIO_PORTB, 4, 0)
 /* Configure data pin as input */
diff --git a/include/ppc440.h b/include/ppc440.h
index e60fa13905..5f87d2c600 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -68,6 +68,12 @@
 #define CPR0_SPCID	0x0120
 #define CPR0_ICFG	0x0140
 
+/* 440EPX boot strap options */
+#define BOOT_STRAP_OPTION_A	0x00000000
+#define BOOT_STRAP_OPTION_B	0x00000001
+#define BOOT_STRAP_OPTION_D	0x00000003
+#define BOOT_STRAP_OPTION_E	0x00000004
+
 /* 440gx sdr register definations */
 #define SDR0_SDSTP0	0x0020	    /* */
 #define SDR0_SDSTP1	0x0021	    /* */