diff options
| author | Christian Riesch <christian.riesch@omicron.at> | 2012-02-02 00:44:37 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-02-12 10:11:33 +0100 |
| commit | 27b66622b51f350ce6c143f82d104860ee887f5c (patch) | |
| tree | f4747f95622b6d7809baf4ee8bebdd8a6c56d9b4 | |
| parent | eb93524224d269e4e4124429e91757cab4ee27e6 (diff) | |
arm, arm926ejs: Do cpu critical inits only for boards that require it
This patch reverts commit ca4b55800ed74207c35271bf7335a092d4955416
"arm, arm926ejs: always do cpu critical inits" since it impacts all
arm926ejs based configurations and caused problems, e.g., with
the hawkboard.
Instead the patch removes the CONFIG_SKIP_LOWLEVEL_INIT defines
from the board configurations that need low level initialization.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
| -rw-r--r-- | arch/arm/cpu/arm926ejs/start.S | 6 | ||||
| -rw-r--r-- | include/configs/cam_enc_4xx.h | 6 | ||||
| -rw-r--r-- | include/configs/da850evm.h | 1 | ||||
| -rw-r--r-- | include/configs/enbw_cmc.h | 1 |
4 files changed, 4 insertions, 10 deletions
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 6a09c028e4..bb4d00bf3f 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -194,7 +194,9 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit +#endif /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: @@ -353,6 +355,7 @@ _dynsym_start_ofs: * ************************************************************************* */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT cpu_init_crit: /* * flush v4 I/D caches @@ -371,15 +374,14 @@ cpu_init_crit: orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ mcr p15, 0, r0, c1, c0, 0 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* * Go setup Memory and board specific bits prior to relocation. */ mov ip, lr /* perserve link reg across call */ bl lowlevel_init /* go setup pll,mux,memory */ mov lr, ip /* restore link */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ mov pc, lr /* back to my caller */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ #ifndef CONFIG_SPL_BUILD /* diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 79a8611f82..0fee53f750 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -275,12 +275,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000 -/* - * U-Boot is a 3rd stage loader and if booting with spl, cpu setup is - * done in board_init_f from c code. - */ -#define CONFIG_SKIP_LOWLEVEL_INIT - /* for UBL header */ #define CONFIG_SYS_UBL_BLOCK (CONFIG_SYS_NAND_PAGE_SIZE) diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index f32bd34add..51a5a09a72 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 -#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 /* diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 9fd6a4f183..98421795b4 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 -#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_DA850_LOWLEVEL #define CONFIG_ARCH_CPU_INIT #define CONFIG_DA8XX_GPIO |