summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-11-09 09:29:06 +0000
committerWolfgang Denk <wd@denx.de>2011-11-16 21:10:50 +0100
commit2595fddb264ccba5936f94fea54def8fbb259800 (patch)
tree728fbe1e4e337156033c99bd284a5550164be6e8
parentbe51c5c98b8d705a1795d00668344cfade8d6545 (diff)
board/esd/cpci750/sdram_init.c: Fix GCC 4.6 build warnings
Fix: sdram_init.c: In function 'check_dimm': sdram_init.c:267:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:253:16: warning: variable 'spd_checksum' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1693:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1693:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Biggest part o the fix is converting the custom debug code to standard debug(). No attempts were made to cleanup the code. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-rw-r--r--board/esd/cpci750/sdram_init.c507
1 files changed, 193 insertions, 314 deletions
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index 615e32af9f..9767cf2ca0 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -47,18 +47,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#undef DEBUG
-/* #define DEBUG */
-#ifdef CONFIG_PCI
-#define MAP_PCI
-#endif /* of CONFIG_PCI */
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
int set_dfcdlInit(void); /* setup delay line of Mv64360 */
/* ------------------------------------------------------------------------- */
@@ -250,8 +238,6 @@ NSto10PS(unsigned char spd_byte)
/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
{
- unsigned long spd_checksum;
-
uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
int ret;
unsigned int i, j, density = 1, devicesForErrCheck = 0;
@@ -264,7 +250,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
uchar supp_cal, cal_val;
ulong memclk, tmemclk;
ulong tmp;
- uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks;
+ uchar trp_clocks = 0, tras_clocks;
uchar data[128];
memclk = gd->bus_clk;
@@ -275,11 +261,11 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
ret = 0;
- DP (puts ("before i2c read\n"));
+ debug("before i2c read\n");
ret = i2c_read (addr, 0, 2, data, 128);
- DP (puts ("after i2c read\n"));
+ debug("after i2c read\n");
if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd')
|| (data[67] != '-') || (data[68] != 'g') || (data[69] != 'm')
@@ -345,7 +331,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
}
if (ret) {
- DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
+ debug("No DIMM in slot %d [err = %x]\n", slot, ret);
return 0;
} else
dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */
@@ -402,8 +388,9 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
/*------------------------------------------------------------------------------------------------------------------------------*/
/* calculate SPD checksum */
/*------------------------------------------------------------------------------------------------------------------------------*/
- spd_checksum = 0;
#if 0 /* test-only */
+ spd_checksum = 0;
+
for (i = 0; i <= 62; i++) {
spd_checksum += data[i];
}
@@ -424,46 +411,40 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM;
#ifdef DEBUG
if (dimmInfo->memoryType == 0)
- DP (printf
- ("Dram_type in slot %d is: SDRAM\n",
- dimmInfo->slot));
+ debug("Dram_type in slot %d is: SDRAM\n",
+ dimmInfo->slot);
if (dimmInfo->memoryType == 1)
- DP (printf
- ("Dram_type in slot %d is: DDRAM\n",
- dimmInfo->slot));
+ debug("Dram_type in slot %d is: DDRAM\n",
+ dimmInfo->slot);
#endif
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 3: /* Number Of Row Addresses */
dimmInfo->numOfRowAddresses = data[i];
- DP (printf
- ("Module Number of row addresses: %d\n",
- dimmInfo->numOfRowAddresses));
+ debug("Module Number of row addresses: %d\n",
+ dimmInfo->numOfRowAddresses);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 4: /* Number Of Column Addresses */
dimmInfo->numOfColAddresses = data[i];
- DP (printf
- ("Module Number of col addresses: %d\n",
- dimmInfo->numOfColAddresses));
+ debug("Module Number of col addresses: %d\n",
+ dimmInfo->numOfColAddresses);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 5: /* Number Of Module Banks */
dimmInfo->numOfModuleBanks = data[i];
- DP (printf
- ("Number of Banks on Mod. : %d\n",
- dimmInfo->numOfModuleBanks));
+ debug("Number of Banks on Mod. : %d\n",
+ dimmInfo->numOfModuleBanks);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 6: /* Data Width */
dimmInfo->dataWidth = data[i];
- DP (printf
- ("Module Data Width: %d\n",
- dimmInfo->dataWidth));
+ debug("Module Data Width: %d\n",
+ dimmInfo->dataWidth);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -471,33 +452,27 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
switch (data[i]) {
case 0x0:
dimmInfo->voltageInterface = TTL_5V_TOLERANT;
- DP (printf
- ("Module is TTL_5V_TOLERANT\n"));
+ debug("Module is TTL_5V_TOLERANT\n");
break;
case 0x1:
dimmInfo->voltageInterface = LVTTL;
- DP (printf
- ("Module is LVTTL\n"));
+ debug("Module is LVTTL\n");
break;
case 0x2:
dimmInfo->voltageInterface = HSTL_1_5V;
- DP (printf
- ("Module is TTL_5V_TOLERANT\n"));
+ debug("Module is TTL_5V_TOLERANT\n");
break;
case 0x3:
dimmInfo->voltageInterface = SSTL_3_3V;
- DP (printf
- ("Module is HSTL_1_5V\n"));
+ debug("Module is HSTL_1_5V\n");
break;
case 0x4:
dimmInfo->voltageInterface = SSTL_2_5V;
- DP (printf
- ("Module is SSTL_2_5V\n"));
+ debug("Module is SSTL_2_5V\n");
break;
default:
dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
- DP (printf
- ("Module is VOLTAGE_UNKNOWN\n"));
+ debug("Module is VOLTAGE_UNKNOWN\n");
break;
}
break;
@@ -516,9 +491,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
leftOfPoint;
dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
rightOfPoint;
- DP (printf
- ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",
- leftOfPoint, rightOfPoint));
+ debug("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -531,9 +505,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
rightOfPoint = time_tmp % div;
dimmInfo->clockToDataOut_LoP = leftOfPoint;
dimmInfo->clockToDataOut_RoP = rightOfPoint;
- DP (printf
- ("Clock To Data Out: %d.%2d [ns]\n",
- leftOfPoint, rightOfPoint));
+ debug("Clock To Data Out: %d.%2d [ns]\n",
+ leftOfPoint, rightOfPoint);
/*dimmInfo->clockToDataOut */
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -541,42 +514,37 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
#ifdef CONFIG_MV64360_ECC
case 11: /* Error Check Type */
dimmInfo->errorCheckType = data[i];
- DP (printf
- ("Error Check Type (0=NONE): %d\n",
- dimmInfo->errorCheckType));
+ debug("Error Check Type (0=NONE): %d\n",
+ dimmInfo->errorCheckType);
break;
#endif /* of ifdef CONFIG_MV64360_ECC */
/*------------------------------------------------------------------------------------------------------------------------------*/
case 12: /* Refresh Interval */
dimmInfo->RefreshInterval = data[i];
- DP (printf
- ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
- dimmInfo->RefreshInterval));
+ debug("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
+ dimmInfo->RefreshInterval);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 13: /* Sdram Width */
dimmInfo->sdramWidth = data[i];
- DP (printf
- ("Sdram Width: %d\n",
- dimmInfo->sdramWidth));
+ debug("Sdram Width: %d\n",
+ dimmInfo->sdramWidth);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 14: /* Error Check Data Width */
dimmInfo->errorCheckDataWidth = data[i];
- DP (printf
- ("Error Check Data Width: %d\n",
- dimmInfo->errorCheckDataWidth));
+ debug("Error Check Data Width: %d\n",
+ dimmInfo->errorCheckDataWidth);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 15: /* Minimum Clock Delay */
dimmInfo->minClkDelay = data[i];
- DP (printf
- ("Minimum Clock Delay: %d\n",
- dimmInfo->minClkDelay));
+ debug("Minimum Clock Delay: %d\n",
+ dimmInfo->minClkDelay);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -592,26 +560,24 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->burstLengthSupported = data[i];
#ifdef DEBUG
- DP (printf
- ("Burst Length Supported: "));
+ debug("Burst Length Supported: ");
if (dimmInfo->burstLengthSupported & 0x01)
- DP (printf ("1, "));
+ debug("1, ");
if (dimmInfo->burstLengthSupported & 0x02)
- DP (printf ("2, "));
+ debug("2, ");
if (dimmInfo->burstLengthSupported & 0x04)
- DP (printf ("4, "));
+ debug("4, ");
if (dimmInfo->burstLengthSupported & 0x08)
- DP (printf ("8, "));
- DP (printf (" Bit \n"));
+ debug("8, ");
+ debug(" Bit \n");
#endif
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 17: /* Number Of Banks On Each Device */
dimmInfo->numOfBanksOnEachDevice = data[i];
- DP (printf
- ("Number Of Banks On Each Chip: %d\n",
- dimmInfo->numOfBanksOnEachDevice));
+ debug("Number Of Banks On Each Chip: %d\n",
+ dimmInfo->numOfBanksOnEachDevice);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -631,34 +597,32 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
********************************************************/
dimmInfo->suportedCasLatencies = data[i];
#ifdef DEBUG
- DP (printf
- ("Suported Cas Latencies: (CL) "));
+ debug("Suported Cas Latencies: (CL) ");
if (dimmInfo->memoryType == 0) { /* SDRAM */
for (k = 0; k <= 7; k++) {
if (dimmInfo->
suportedCasLatencies & (1 << k))
- DP (printf
- ("%d, ",
- k + 1));
+ debug("%d, ",
+ k + 1);
}
} else { /* DDR-RAM */
if (dimmInfo->suportedCasLatencies & 1)
- DP (printf ("1, "));
+ debug("1, ");
if (dimmInfo->suportedCasLatencies & 2)
- DP (printf ("1.5, "));
+ debug("1.5, ");
if (dimmInfo->suportedCasLatencies & 4)
- DP (printf ("2, "));
+ debug("2, ");
if (dimmInfo->suportedCasLatencies & 8)
- DP (printf ("2.5, "));
+ debug("2.5, ");
if (dimmInfo->suportedCasLatencies & 16)
- DP (printf ("3, "));
+ debug("3, ");
if (dimmInfo->suportedCasLatencies & 32)
- DP (printf ("3.5, "));
+ debug("3.5, ");
}
- DP (printf ("\n"));
+ debug("\n");
#endif
/* Calculating MAX CAS latency */
for (j = 7; j > 0; j--) {
@@ -670,8 +634,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
/* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
switch (j) {
case 7:
- DP (printf
- ("Max. Cas Latencies (DDR): ERROR !!!\n"));
+ debug("Max. Cas Latencies (DDR): ERROR !!!\n");
dimmInfo->
maxClSupported_DDR
=
@@ -679,8 +642,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
hang ();
break;
case 6:
- DP (printf
- ("Max. Cas Latencies (DDR): ERROR !!!\n"));
+ debug("Max. Cas Latencies (DDR): ERROR !!!\n");
dimmInfo->
maxClSupported_DDR
=
@@ -688,36 +650,31 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
hang ();
break;
case 5:
- DP (printf
- ("Max. Cas Latencies (DDR): 3.5 clk's\n"));
+ debug("Max. Cas Latencies (DDR): 3.5 clk's\n");
dimmInfo->
maxClSupported_DDR
= DDR_CL_3_5;
break;
case 4:
- DP (printf
- ("Max. Cas Latencies (DDR): 3 clk's \n"));
+ debug("Max. Cas Latencies (DDR): 3 clk's \n");
dimmInfo->
maxClSupported_DDR
= DDR_CL_3;
break;
case 3:
- DP (printf
- ("Max. Cas Latencies (DDR): 2.5 clk's \n"));
+ debug("Max. Cas Latencies (DDR): 2.5 clk's \n");
dimmInfo->
maxClSupported_DDR
= DDR_CL_2_5;
break;
case 2:
- DP (printf
- ("Max. Cas Latencies (DDR): 2 clk's \n"));
+ debug("Max. Cas Latencies (DDR): 2 clk's \n");
dimmInfo->
maxClSupported_DDR
= DDR_CL_2;
break;
case 1:
- DP (printf
- ("Max. Cas Latencies (DDR): 1.5 clk's \n"));
+ debug("Max. Cas Latencies (DDR): 1.5 clk's \n");
dimmInfo->
maxClSupported_DDR
= DDR_CL_1_5;
@@ -736,32 +693,29 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->
maxCASlatencySupported_RoP
= 0;
- DP (printf
- ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
+ debug("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
dimmInfo->
maxCASlatencySupported_LoP,
dimmInfo->
- maxCASlatencySupported_RoP));
+ maxCASlatencySupported_RoP);
break;
case SDRAM:
/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */
- DP (printf
- ("Max. Cas Latencies (SD): %d\n",
+ debug("Max. Cas Latencies (SD): %d\n",
dimmInfo->
- maxClSupported_SD));
+ maxClSupported_SD);
dimmInfo->
maxCASlatencySupported_LoP
= j;
dimmInfo->
maxCASlatencySupported_RoP
= 0;
- DP (printf
- ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
+ debug("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
dimmInfo->
maxCASlatencySupported_LoP,
dimmInfo->
- maxCASlatencySupported_RoP));
+ maxCASlatencySupported_RoP);
break;
}
break;
@@ -771,7 +725,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
/*------------------------------------------------------------------------------------------------------------------------------*/
case 21: /* Buffered Address And Control Inputs */
- DP (printf ("\nModul Attributes (SPD Byte 21): \n"));
+ debug("\nModul Attributes (SPD Byte 21): \n");
dimmInfo->bufferedAddrAndControlInputs =
data[i] & BIT0;
dimmInfo->registeredAddrAndControlInputs =
@@ -784,62 +738,47 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
(data[i] & BIT5) >> 5;
dimmInfo->redundantRowAddressing =
(data[i] & BIT6) >> 6;
-#ifdef DEBUG
+
if (dimmInfo->bufferedAddrAndControlInputs == 1)
- DP (printf
- (" - Buffered Address/Control Input: Yes \n"));
+ debug(" - Buffered Address/Control Input: Yes \n");
else
- DP (printf
- (" - Buffered Address/Control Input: No \n"));
+ debug(" - Buffered Address/Control Input: No \n");
if (dimmInfo->registeredAddrAndControlInputs == 1)
- DP (printf
- (" - Registered Address/Control Input: Yes \n"));
+ debug(" - Registered Address/Control Input: Yes \n");
else
- DP (printf
- (" - Registered Address/Control Input: No \n"));
+ debug(" - Registered Address/Control Input: No \n");
if (dimmInfo->onCardPLL == 1)
- DP (printf
- (" - On-Card PLL (clock): Yes \n"));
+ debug(" - On-Card PLL (clock): Yes \n");
else
- DP (printf
- (" - On-Card PLL (clock): No \n"));
+ debug(" - On-Card PLL (clock): No \n");
if (dimmInfo->bufferedDQMBinputs == 1)
- DP (printf
- (" - Bufferd DQMB Inputs: Yes \n"));
+ debug(" - Bufferd DQMB Inputs: Yes \n");
else
- DP (printf
- (" - Bufferd DQMB Inputs: No \n"));
+ debug(" - Bufferd DQMB Inputs: No \n");
if (dimmInfo->registeredDQMBinputs == 1)
- DP (printf
- (" - Registered DQMB Inputs: Yes \n"));
+ debug(" - Registered DQMB Inputs: Yes \n");
else
- DP (printf
- (" - Registered DQMB Inputs: No \n"));
+ debug(" - Registered DQMB Inputs: No \n");
if (dimmInfo->differentialClockInput == 1)
- DP (printf
- (" - Differential Clock Input: Yes \n"));
+ debug(" - Differential Clock Input: Yes \n");
else
- DP (printf
- (" - Differential Clock Input: No \n"));
+ debug(" - Differential Clock Input: No \n");
if (dimmInfo->redundantRowAddressing == 1)
- DP (printf
- (" - redundant Row Addressing: Yes \n"));
+ debug(" - redundant Row Addressing: Yes \n");
else
- DP (printf
- (" - redundant Row Addressing: No \n"));
+ debug(" - redundant Row Addressing: No \n");
-#endif
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 22: /* Suported AutoPreCharge */
- DP (printf ("\nModul Attributes (SPD Byte 22): \n"));
+ debug("\nModul Attributes (SPD Byte 22): \n");
dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0;
dimmInfo->suportedAutoPreCharge =
(data[i] & BIT1) >> 1;
@@ -851,50 +790,37 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
(data[i] & BIT4) >> 4;
dimmInfo->suported5PercentUpperVCC =
(data[i] & BIT5) >> 5;
-#ifdef DEBUG
+
if (dimmInfo->suportedEarlyRasPreCharge == 1)
- DP (printf
- (" - Early Ras Precharge: Yes \n"));
+ debug(" - Early Ras Precharge: Yes \n");
else
- DP (printf
- (" - Early Ras Precharge: No \n"));
+ debug(" - Early Ras Precharge: No \n");
if (dimmInfo->suportedAutoPreCharge == 1)
- DP (printf
- (" - AutoPreCharge: Yes \n"));
+ debug(" - AutoPreCharge: Yes \n");
else
- DP (printf
- (" - AutoPreCharge: No \n"));
+ debug(" - AutoPreCharge: No \n");
if (dimmInfo->suportedPreChargeAll == 1)
- DP (printf
- (" - Precharge All: Yes \n"));
+ debug(" - Precharge All: Yes \n");
else
- DP (printf
- (" - Precharge All: No \n"));
+ debug(" - Precharge All: No \n");
if (dimmInfo->suportedWrite1ReadBurst == 1)
- DP (printf
- (" - Write 1/ReadBurst: Yes \n"));
+ debug(" - Write 1/ReadBurst: Yes \n");
else
- DP (printf
- (" - Write 1/ReadBurst: No \n"));
+ debug(" - Write 1/ReadBurst: No \n");
if (dimmInfo->suported5PercentLowVCC == 1)
- DP (printf
- (" - lower VCC tolerance: 5 Percent \n"));
+ debug(" - lower VCC tolerance: 5 Percent \n");
else
- DP (printf
- (" - lower VCC tolerance: 10 Percent \n"));
+ debug(" - lower VCC tolerance: 10 Percent \n");
if (dimmInfo->suported5PercentUpperVCC == 1)
- DP (printf
- (" - upper VCC tolerance: 5 Percent \n"));
+ debug(" - upper VCC tolerance: 5 Percent \n");
else
- DP (printf
- (" - upper VCC tolerance: 10 Percent \n"));
+ debug(" - upper VCC tolerance: 10 Percent \n");
-#endif
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -911,9 +837,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
leftOfPoint;
dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP =
rightOfPoint;
- DP (printf
- ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",
- leftOfPoint, rightOfPoint));
+ debug("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -927,9 +852,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
rightOfPoint = time_tmp % div;
dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
- DP (printf
- ("Clock To Data Out (2nd CL value): %d.%2d [ns]\n",
- leftOfPoint, rightOfPoint));
+ debug("Clock To Data Out (2nd CL value): %d.%2d [ns]\n",
+ leftOfPoint, rightOfPoint);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -946,9 +870,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
leftOfPoint;
dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP =
rightOfPoint;
- DP (printf
- ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",
- leftOfPoint, rightOfPoint));
+ debug("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -962,9 +885,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
rightOfPoint = time_tmp % div;
dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
- DP (printf
- ("Clock To Data Out (3rd CL value): %d.%2d [ns]\n",
- leftOfPoint, rightOfPoint));
+ debug("Clock To Data Out (3rd CL value): %d.%2d [ns]\n",
+ leftOfPoint, rightOfPoint);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -981,12 +903,10 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
trp_clocks =
(dimmInfo->minRowPrechargeTime +
(tmemclk - 1)) / tmemclk;
- DP (printf
- ("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n",
- tmemclk, tmemclk / 100, tmemclk % 100));
- DP (printf
- ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n",
- leftOfPoint, rightOfPoint, trp_clocks));
+ debug("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n",
+ tmemclk, tmemclk / 100, tmemclk % 100);
+ debug("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1000,12 +920,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
rightOfPoint = (data[i] & maskRightOfPoint) * 25;
dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint); /* measured in 100ns Intervals */
- trrd_clocks =
- (dimmInfo->minRowActiveRowActiveDelay +
- (tmemclk - 1)) / tmemclk;
- DP (printf
- ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n",
- leftOfPoint, rightOfPoint, trp_clocks));
+ debug("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1019,12 +935,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
rightOfPoint = (data[i] & maskRightOfPoint) * 25;
dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint); /* measured in 100ns Intervals */
- trcd_clocks =
- (dimmInfo->minRowActiveRowActiveDelay +
- (tmemclk - 1)) / tmemclk;
- DP (printf
- ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n",
- leftOfPoint, rightOfPoint, trp_clocks));
+ debug("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1033,41 +945,38 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
tras_clocks =
(NSto10PS (data[i]) +
(tmemclk - 1)) / tmemclk;
- DP (printf
- ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n",
- dimmInfo->minRasPulseWidth, tras_clocks));
+ debug("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n",
+ dimmInfo->minRasPulseWidth, tras_clocks);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
case 31: /* Module Bank Density */
dimmInfo->moduleBankDensity = data[i];
- DP (printf
- ("Module Bank Density: %d\n",
- dimmInfo->moduleBankDensity));
+ debug("Module Bank Density: %d\n",
+ dimmInfo->moduleBankDensity);
#ifdef DEBUG
- DP (printf
- ("*** Offered Densities (more than 1 = Multisize-Module): "));
+ debug("*** Offered Densities (more than 1 = Multisize-Module): ");
{
if (dimmInfo->moduleBankDensity & 1)
- DP (printf ("4MB, "));
+ debug("4MB, ");
if (dimmInfo->moduleBankDensity & 2)
- DP (printf ("8MB, "));
+ debug("8MB, ");
if (dimmInfo->moduleBankDensity & 4)
- DP (printf ("16MB, "));
+ debug("16MB, ");
if (dimmInfo->moduleBankDensity & 8)
- DP (printf ("32MB, "));
+ debug("32MB, ");
if (dimmInfo->moduleBankDensity & 16)
- DP (printf ("64MB, "));
+ debug("64MB, ");
if (dimmInfo->moduleBankDensity & 32)
- DP (printf ("128MB, "));
+ debug("128MB, ");
if ((dimmInfo->moduleBankDensity & 64)
|| (dimmInfo->moduleBankDensity & 128)) {
- DP (printf ("ERROR, "));
+ debug("ERROR, ");
hang ();
}
}
- DP (printf ("\n"));
+ debug("\n");
#endif
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1093,9 +1002,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
}
dimmInfo->addrAndCommandSetupTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
- DP (printf
- ("Address And Command Setup Time [ns]: %d.%d\n",
- sign * leftOfPoint, rightOfPoint));
+ debug("Address And Command Setup Time [ns]: %d.%d\n",
+ sign * leftOfPoint, rightOfPoint);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1120,9 +1028,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
}
dimmInfo->addrAndCommandHoldTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
- DP (printf
- ("Address And Command Hold Time [ns]: %d.%d\n",
- sign * leftOfPoint, rightOfPoint));
+ debug("Address And Command Hold Time [ns]: %d.%d\n",
+ sign * leftOfPoint, rightOfPoint);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1147,9 +1054,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
}
dimmInfo->dataInputSetupTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
- DP (printf
- ("Data Input Setup Time [ns]: %d.%d\n",
- sign * leftOfPoint, rightOfPoint));
+ debug("Data Input Setup Time [ns]: %d.%d\n",
+ sign * leftOfPoint, rightOfPoint);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1174,9 +1080,8 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
}
dimmInfo->dataInputHoldTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
- DP (printf
- ("Data Input Hold Time [ns]: %d.%d\n\n",
- sign * leftOfPoint, rightOfPoint));
+ debug("Data Input Hold Time [ns]: %d.%d\n\n",
+ sign * leftOfPoint, rightOfPoint);
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
}
@@ -1213,7 +1118,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
tmp *= dimmInfo->sdramWidth;
tmp = tmp >> 24; /* div by 0x4000000 (64M) */
dimmInfo->drb_size = (uchar) tmp;
- DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
+ debug("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size);
/* try a CAS latency of 3 first... */
@@ -1236,11 +1141,11 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
cal_val = 4;
}
- DP (printf ("cal_val = %d\n", cal_val * 5));
+ debug("cal_val = %d\n", cal_val * 5);
/* bummer, did't work... */
if (cal_val == 0) {
- DP (printf ("Couldn't find a good CAS latency\n"));
+ debug("Couldn't find a good CAS latency\n");
hang ();
return 0;
}
@@ -1267,81 +1172,74 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
/* Program the GT with the discovered data */
if (info->registeredAddrAndControlInputs == true)
- DP (printf
- ("Module is registered, but we do not support registered Modules !!!\n"));
+ debug("Module is registered, but we do not support registered Modules !!!\n");
/* delay line */
set_dfcdlInit (); /* may be its not needed */
- DP (printf ("Delay line set done\n"));
+ debug("Delay line set done\n");
/* set SDRAM mode NOP */ /* To_do check it */
GT_REG_WRITE (SDRAM_OPERATION, 0x5);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
- ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
+ debug("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n");
}
#ifdef CONFIG_MV64360_ECC
if ((info->errorCheckType == 0x2) && (CPCI750_ECC_TEST)) {
/* DRAM has ECC, so turn it on */
sdram_config_reg |= BIT18;
- DP(printf("Enabling ECC\n"));
+ debug("Enabling ECC\n");
}
#endif /* of ifdef CONFIG_MV64360_ECC */
/* SDRAM configuration */
GT_REG_WRITE(SDRAM_CONFIG, sdram_config_reg);
- DP (printf ("sdram_conf 0x1400: %08x\n", GTREGREAD (SDRAM_CONFIG)));
+ debug("sdram_conf 0x1400: %08x\n", GTREGREAD (SDRAM_CONFIG));
/* SDRAM open pages controll keep open as much as I can */
GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0);
- DP (printf
- ("sdram_open_pages_controll 0x1414: %08x\n",
- GTREGREAD (SDRAM_OPEN_PAGES_CONTROL)));
+ debug("sdram_open_pages_controll 0x1414: %08x\n",
+ GTREGREAD (SDRAM_OPEN_PAGES_CONTROL));
/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset */
if (tmp == 0)
- DP (printf ("Core Signals are sync (by HW-Setting)!!!\n"));
+ debug("Core Signals are sync (by HW-Setting)!!!\n");
else
- DP (printf
- ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
+ debug("Core Signals syncs. are bypassed (by HW-Setting)!!!\n");
/* SDRAM set CAS Lentency according to SPD information */
switch (info->memoryType) {
case SDRAM:
- DP (printf ("### SD-RAM not supported yet !!!\n"));
+ debug("### SD-RAM not supported yet !!!\n");
hang ();
/* ToDo fill SD-RAM if needed !!!!! */
break;
case DDR:
- DP (printf ("### SET-CL for DDR-RAM\n"));
+ debug("### SET-CL for DDR-RAM\n");
switch (info->maxClSupported_DDR) {
case DDR_CL_3:
tmp_dunit_control_low = 0x3c000000; /* Read-Data sampled on falling edge of Clk */
tmp_sdram_mode = 0x32; /* CL=3 Burstlength = 4 */
- DP (printf
- ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
- tmp_sdram_mode, tmp_dunit_control_low));
+ debug("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+ tmp_sdram_mode, tmp_dunit_control_low);
break;
case DDR_CL_2_5:
if (tmp == 1) { /* clocks sync */
tmp_dunit_control_low = 0x24000000; /* Read-Data sampled on falling edge of Clk */
tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */
- DP (printf
- ("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
- tmp_sdram_mode, tmp_dunit_control_low));
+ debug("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+ tmp_sdram_mode, tmp_dunit_control_low);
} else { /* clk sync. bypassed */
tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */
tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */
- DP (printf
- ("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
- tmp_sdram_mode, tmp_dunit_control_low));
+ debug("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+ tmp_sdram_mode, tmp_dunit_control_low);
}
break;
@@ -1349,16 +1247,14 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
if (tmp == 1) { /* Sync */
tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */
tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */
- DP (printf
- ("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
- tmp_sdram_mode, tmp_dunit_control_low));
+ debug("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+ tmp_sdram_mode, tmp_dunit_control_low);
} else { /* Not sync. */
tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk */
tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */
- DP (printf
- ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
- tmp_sdram_mode, tmp_dunit_control_low));
+ debug("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+ tmp_sdram_mode, tmp_dunit_control_low);
}
break;
@@ -1366,16 +1262,14 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
if (tmp == 1) { /* Sync */
tmp_dunit_control_low = 0x23000000; /* Read-Data sampled on falling edge of Clk */
tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4 */
- DP (printf
- ("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
- tmp_sdram_mode, tmp_dunit_control_low));
+ debug("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+ tmp_sdram_mode, tmp_dunit_control_low);
} else { /* not sync */
tmp_dunit_control_low = 0x1a000000; /* Read-Data sampled on rising edge of Clk */
tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4 */
- DP (printf
- ("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
- tmp_sdram_mode, tmp_dunit_control_low));
+ debug("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+ tmp_sdram_mode, tmp_dunit_control_low);
}
break;
@@ -1393,8 +1287,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
/* set SDRAM mode SetCommand 0x1418 */
GT_REG_WRITE (SDRAM_OPERATION, 0x3);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
- ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+ debug("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n");
}
@@ -1415,8 +1308,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
/* set SDRAM mode SetCommand 0x1418 */
GT_REG_WRITE (SDRAM_OPERATION, 0x3);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
- ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
+ debug("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n");
}
/*------------------------------------------------------------------------------ */
@@ -1428,41 +1320,39 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
tmp = 0x02;
- DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size));
+ debug("drb_size (n*64Mbit): %d\n", info->drb_size);
switch (info->drb_size) {
case 1: /* 64 Mbit */
case 2: /* 128 Mbit */
- DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n"));
+ debug("RAM-Device_size 64Mbit or 128Mbit)\n");
tmp |= (0x00 << 4);
break;
case 4: /* 256 Mbit */
case 8: /* 512 Mbit */
- DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n"));
+ debug("RAM-Device_size 256Mbit or 512Mbit)\n");
tmp |= (0x01 << 4);
break;
case 16: /* 1 Gbit */
case 32: /* 2 Gbit */
- DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n"));
+ debug("RAM-Device_size 1Gbit or 2Gbit)\n");
tmp |= (0x02 << 4);
break;
default:
printf ("Error in dram size calculation\n");
- DP (printf ("Assume: RAM-Device_size 1Gbit or 2Gbit)\n"));
+ debug("Assume: RAM-Device_size 1Gbit or 2Gbit)\n");
tmp |= (0x02 << 4);
return 1;
}
/* SDRAM bank parameters */
/* the param registers for slot 1 (banks 2+3) are offset by 0x8 */
- DP (printf
- ("setting up slot %d config with: %08lx \n", info->slot, tmp));
+ debug("setting up slot %d config with: %08lx \n", info->slot, tmp);
GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp);
/* ------------------------------------------------------------------------------ */
- DP (printf
- ("setting up sdram_timing_control_low with: %08x \n",
- 0x11511220));
+ debug("setting up sdram_timing_control_low with: %08x \n",
+ 0x11511220);
GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x11511220);
@@ -1474,38 +1364,33 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
if (info->registeredAddrAndControlInputs
|| info->registeredDQMBinputs) {
tmp |= (1 << 17);
- DP (printf
- ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
+ debug("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
info->registeredAddrAndControlInputs,
- info->registeredDQMBinputs));
+ info->registeredDQMBinputs);
}
/* Use buffer 1 to return read data to the CPU
* Page 426 MV64360 */
tmp |= (1 << 26);
- DP (printf
- ("Before Buffer assignment - sdram_conf: %08x\n",
- GTREGREAD (SDRAM_CONFIG)));
- DP (printf
- ("After Buffer assignment - sdram_conf: %08x\n",
- GTREGREAD (SDRAM_CONFIG)));
+ debug("Before Buffer assignment - sdram_conf: %08x\n",
+ GTREGREAD (SDRAM_CONFIG));
+ debug("After Buffer assignment - sdram_conf: %08x\n",
+ GTREGREAD (SDRAM_CONFIG));
/* SDRAM timing To_do: */
tmp = GTREGREAD (SDRAM_TIMING_CONTROL_HIGH);
- DP (printf ("# sdram_timing_control_high is : %08lx \n", tmp));
+ debug("# sdram_timing_control_high is : %08lx \n", tmp);
/* SDRAM address decode register */
/* program this with the default value */
tmp = GTREGREAD (SDRAM_ADDR_CONTROL);
- DP (printf
- ("SDRAM address control (before: decode): %08x ",
- GTREGREAD (SDRAM_ADDR_CONTROL)));
+ debug("SDRAM address control (before: decode): %08x ",
+ GTREGREAD (SDRAM_ADDR_CONTROL));
GT_REG_WRITE (SDRAM_ADDR_CONTROL, (tmp | 0x2));
- DP (printf
- ("SDRAM address control (after: decode): %08x\n",
- GTREGREAD (SDRAM_ADDR_CONTROL)));
+ debug("SDRAM address control (after: decode): %08x\n",
+ GTREGREAD (SDRAM_ADDR_CONTROL));
/* set the SDRAM configuration for each bank */
@@ -1514,8 +1399,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
int l, l1;
i = info->slot;
- DP (printf
- ("\n*** Running a MRS cycle for bank %d ***\n", i));
+ debug("\n*** Running a MRS cycle for bank %d ***\n", i);
/* map the bank */
memory_map_bank (i, 0, GB / 4);
@@ -1525,15 +1409,13 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
GT_REG_WRITE (EXTENDED_DRAM_MODE, 0x0);
GT_REG_WRITE (SDRAM_OPERATION, 0x4);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
- ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+ debug("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n");
}
GT_REG_WRITE (SDRAM_MODE, tmp | 0x80);
GT_REG_WRITE (SDRAM_OPERATION, 0x3);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
- ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+ debug("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n");
}
l1 = 0;
for (l=0;l<200;l++)
@@ -1542,15 +1424,13 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
GT_REG_WRITE (SDRAM_MODE, tmp);
GT_REG_WRITE (SDRAM_OPERATION, 0x3);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
- ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+ debug("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n");
}
/* switch back to normal operation mode */
GT_REG_WRITE (SDRAM_OPERATION, 0x5);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
- ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+ debug("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n");
}
#endif /* test only */
@@ -1597,7 +1477,7 @@ dram_size(long int *base, long int maxsize)
*b=save2;
if (val != cnt) {
- DP(printf("Found %08x at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr));
+ debug("Found %08x at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr);
/* fix boundary condition.. STARTVAL means zero */
if(cnt==STARTVAL/sizeof(long)) cnt=0;
return (cnt * sizeof(long));
@@ -1690,7 +1570,6 @@ int mv_dma_transfer(int engine, ulong source_addr,
phys_size_t
initdram(int board_type)
{
- int s0 = 0, s1 = 0;
int checkbank[4] = { [0 ... 3] = 0 };
ulong realsize, total, check;
AUX_MEM_DIMM_INFO dimmInfo1;
@@ -1709,10 +1588,10 @@ initdram(int board_type)
printf("Skipping SD- DDRRAM setup due to NHR bit being set\n");
} else {
/* DIMM0 */
- s0 = check_dimm(0, &dimmInfo1);
+ (void)check_dimm(0, &dimmInfo1);
/* DIMM1 */
- s1 = check_dimm(1, &dimmInfo2);
+ (void)check_dimm(1, &dimmInfo2);
memory_map_bank(0, 0, 0);
memory_map_bank(1, 0, 0);