atstk100x: switch to common cfi driver

This patch removes the board implemenatation for flash driver which can now
safely switched to the common cfi driver.

Compile tested for all atstk100x boards, runtime tested on atstk1002.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

6 files changed, 8 insertions, 261 deletions

diff --git a/board/atmel/atstk1000/Makefile b/board/atmel/atstk1000/Makefile
index ae47396970..a02ccf18c2 100644
--- a/board/atmel/atstk1000/Makefile
+++ b/board/atmel/atstk1000/Makefile
@@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk
 LIB			:= $(obj)lib$(BOARD).o
 
 COBJS-y			+= $(BOARD).o
-COBJS-y			+= flash.o
 
 SRCS			:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS			:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
deleted file mode 100644
index 0ba06ddc5d..0000000000
--- a/board/atmel/atstk1000/flash.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#ifdef CONFIG_ATSTK1000_EXT_FLASH
-#include <asm/arch/cacheflush.h>
-#include <asm/io.h>
-#include <asm/sections.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-flash_info_t flash_info[1];
-
-static void flash_identify(uint16_t *flash, flash_info_t *info)
-{
-	unsigned long flags;
-
-	flags = disable_interrupts();
-
-	dcache_flush_unlocked();
-
-	writew(0xaa, flash + 0x555);
-	writew(0x55, flash + 0xaaa);
-	writew(0x90, flash + 0x555);
-	info->flash_id = readl(flash);
-	writew(0xff, flash);
-
-	readw(flash);
-
-	if (flags)
-		enable_interrupts();
-}
-
-unsigned long flash_init(void)
-{
-	unsigned long addr;
-	unsigned int i;
-
-	flash_info[0].size = CONFIG_SYS_FLASH_SIZE;
-	flash_info[0].sector_count = 135;
-
-	flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]);
-
-	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
-		flash_info[0].start[i] = addr;
-	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
-		flash_info[0].start[i] = addr;
-
-	return CONFIG_SYS_FLASH_SIZE;
-}
-
-void flash_print_info(flash_info_t *info)
-{
-	printf("Flash: Vendor ID: 0x%02lx, Product ID: 0x%02lx\n",
-	       info->flash_id >> 16, info->flash_id & 0xffff);
-	printf("Size: %ld MB in %d sectors\n",
-	       info->size >> 10, info->sector_count);
-}
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	unsigned long flags;
-	unsigned long start_time;
-	uint16_t *fb, *sb;
-	unsigned int i;
-	int ret;
-	uint16_t status;
-
-	if ((s_first < 0) || (s_first > s_last)
-	    || (s_last >= info->sector_count)) {
-		puts("Error: first and/or last sector out of range\n");
-		return ERR_INVAL;
-	}
-
-	for (i = s_first; i < s_last; i++)
-		if (info->protect[i]) {
-			printf("Error: sector %d is protected\n", i);
-			return ERR_PROTECTED;
-		}
-
-	fb = (uint16_t *)uncached(info->start[0]);
-
-	dcache_flush_unlocked();
-
-	for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
-		printf("Erasing sector %3d...", i);
-
-		sb = (uint16_t *)uncached(info->start[i]);
-
-		flags = disable_interrupts();
-
-		start_time = get_timer(0);
-
-		/* Unlock sector */
-		writew(0xaa, fb + 0x555);
-		writew(0x70, sb);
-
-		/* Erase sector */
-		writew(0xaa, fb + 0x555);
-		writew(0x55, fb + 0xaaa);
-		writew(0x80, fb + 0x555);
-		writew(0xaa, fb + 0x555);
-		writew(0x55, fb + 0xaaa);
-		writew(0x30, sb);
-
-		/* Wait for completion */
-		ret = ERR_OK;
-		do {
-			/* TODO: Timeout */
-			status = readw(sb);
-		} while ((status != 0xffff) && !(status & 0x28));
-
-		writew(0xf0, fb);
-
-		/*
-		 * Make sure the command actually makes it to the bus
-		 * before we re-enable interrupts.
-		 */
-		readw(fb);
-
-		if (flags)
-			enable_interrupts();
-
-		if (status != 0xffff) {
-			printf("Flash erase error at address 0x%p: 0x%02x\n",
-			       sb, status);
-			ret = ERR_PROG_ERROR;
-			break;
-		}
-	}
-
-	if (ctrlc())
-		printf("User interrupt!\n");
-
-	return ERR_OK;
-}
-
-int write_buff(flash_info_t *info, uchar *src,
-			   ulong addr, ulong count)
-{
-	unsigned long flags;
-	uint16_t *base, *p, *s, *end;
-	uint16_t word, status, status1;
-	int ret = ERR_OK;
-
-	if (addr < info->start[0]
-	    || (addr + count) > (info->start[0] + info->size)
-	    || (addr + count) < addr) {
-		puts("Error: invalid address range\n");
-		return ERR_INVAL;
-	}
-
-	if (addr & 1 || count & 1 || (unsigned int)src & 1) {
-		puts("Error: misaligned source, destination or count\n");
-		return ERR_ALIGN;
-	}
-
-	base = (uint16_t *)uncached(info->start[0]);
-	end = (uint16_t *)uncached(addr + count);
-
-	flags = disable_interrupts();
-
-	dcache_flush_unlocked();
-	sync_write_buffer();
-
-	for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
-	     p < end && !ctrlc(); p++, s++) {
-		word = *s;
-
-		writew(0xaa, base + 0x555);
-		writew(0x55, base + 0xaaa);
-		writew(0xa0, base + 0x555);
-		writew(word, p);
-
-		sync_write_buffer();
-
-		/* Wait for completion */
-		status1 = readw(p);
-		do {
-			/* TODO: Timeout */
-			status = status1;
-			status1 = readw(p);
-		} while (((status ^ status1) & 0x40)	/* toggled */
-			 && !(status1 & 0x28));		/* error bits */
-
-		/*
-		 * We'll need to check once again for toggle bit
-		 * because the toggle bit may stop toggling as I/O5
-		 * changes to "1" (ref at49bv642.pdf p9)
-		 */
-		status1 = readw(p);
-		status = readw(p);
-		if ((status ^ status1) & 0x40) {
-			printf("Flash write error at address 0x%p: "
-			       "0x%02x != 0x%02x\n",
-			       p, status,word);
-			ret = ERR_PROG_ERROR;
-			writew(0xf0, base);
-			readw(base);
-			break;
-		}
-
-		writew(0xf0, base);
-		readw(base);
-	}
-
-	if (flags)
-		enable_interrupts();
-
-	return ret;
-}
-
-#endif /* CONFIG_ATSTK1000_EXT_FLASH */
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index c17d10718d..f24452be33 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -32,8 +32,6 @@
 #define CONFIG_ATSTK1002
 #define CONFIG_ATSTK1000
 
-#define CONFIG_ATSTK1000_EXT_FLASH
-
 /*
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
@@ -161,11 +159,8 @@
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-/* External flash on STK1000 */
-#if 0
-#define CONFIG_SYS_FLASH_CFI			1
-#define CONFIG_FLASH_CFI_DRIVER		1
-#endif
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
 
 #define CONFIG_SYS_FLASH_BASE			0x00000000
 #define CONFIG_SYS_FLASH_SIZE			0x800000
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index a77d52ef22..c5e357f6d0 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -32,8 +32,6 @@
 #define CONFIG_ATSTK1003
 #define CONFIG_ATSTK1000
 
-#define CONFIG_ATSTK1000_EXT_FLASH
-
 /*
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
@@ -144,11 +142,8 @@
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-/* External flash on STK1000 */
-#if 0
-#define CONFIG_SYS_FLASH_CFI			1
-#define CONFIG_FLASH_CFI_DRIVER		1
-#endif
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
 
 #define CONFIG_SYS_FLASH_BASE			0x00000000
 #define CONFIG_SYS_FLASH_SIZE			0x800000
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index cc00a0a665..3814732b3a 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -32,8 +32,6 @@
 #define CONFIG_ATSTK1004
 #define CONFIG_ATSTK1000
 
-#define CONFIG_ATSTK1000_EXT_FLASH
-
 /*
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
@@ -144,11 +142,8 @@
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-/* External flash on STK1000 */
-#if 0
-#define CONFIG_SYS_FLASH_CFI			1
-#define CONFIG_FLASH_CFI_DRIVER		1
-#endif
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
 
 #define CONFIG_SYS_FLASH_BASE			0x00000000
 #define CONFIG_SYS_FLASH_SIZE			0x800000
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index 2cff140d44..26c08e2128 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -32,8 +32,6 @@
 #define CONFIG_ATSTK1006
 #define CONFIG_ATSTK1000
 
-#define CONFIG_ATSTK1000_EXT_FLASH
-
 /*
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
@@ -161,11 +159,8 @@
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-/* External flash on STK1000 */
-#if 0
-#define CONFIG_SYS_FLASH_CFI			1
-#define CONFIG_FLASH_CFI_DRIVER		1
-#endif
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
 
 #define CONFIG_SYS_FLASH_BASE			0x00000000
 #define CONFIG_SYS_FLASH_SIZE			0x800000