Port libvtv to Solaris

	libstdc++-v3:
	* acinclude.m4 (GLIBCXX_ENABLE_VTABLE_VERIFY) <solaris2*>: Use
	-Wl,-R in VTV_CXXLINKFLAGS.
	* configure: Regenerate.

	* testsuite/18_support/bad_exception/23591_thread-1.c: Use
	-fvtable-verify=none on Solaris 12+.

	libgcc:
	* Makefile.in (VTV_CFLAGS): New variable.
	(vtv_start$(objext), vtv_end$(objext), vtv_end$(objext))
	(vtv_start_preinit$(objext), vtv_end_preinit$(objext)): Use it.
	* config.host (*-*-solaris2*): Add t-crtstuff-pic to tmake_file.
	Add vtv_start.o, vtv_end.o, vtv_start_preinit.o, vtv_end_preinit.o
	to extra_parts if $enable_vtable_verify = yes.

	libvtv:
	* configure.tgt (*-*-solaris2.[1-9]*): Declare supported.
	* configure.ac: Call AC_USE_SYSTEM_EXTENSIONS.
	<*-*-solaris2*>: Check for init priority support.
	Check for getexecname, __fortify_fail, _obstack_begin.
	(VTV_NO_OBSTACK): New conditional.
	* configure: Regenerate.
	* Makefile.am [VTV_NO_OBSTACK] (obstack.c): Use new condition.
	Create empty config.h
	* Makefile.in: Regenerate.

	* vtv_rts.cc [HAVE_GETEXECNAME] (program_invocation_name): New
	variable.
	(read_section_offset_and_length) [HAVE_GETEXECNAME]: Set it.
	(dl_iterate_phdr_callback) [HAVE_GETEXECNAME]: Set it.

	(__fortify_fail): Wrap in HAVE___FORTIFY_FAIL
	[!HAVE___FORTIFY_FAIL]: Provide non-Cygwin implementation.

	(read_section_offset_and_length): Assert sh_size >= VTV_PAGE_SIZE.
	(iterate_modules): Fix typo.
	Use VTV_PAGE_SIZE.
	(dl_iterate_phdr_callback): Fix typo.
	Use VTV_PAGE_SIZE.
	(__VLTChangePermission): Fix typos.

	include:
	* vtv-change-permission.h (VTV_PAGE_SIZE) [__sun__ && __svr4__ &&
	__sparc__]: Define.

	gcc:
	* config/sol2.h (SUPPORTS_INIT_PRIORITY): Move up.
	(STARTFILE_VTV_SPEC, ENDFILE_VTV_SPEC): Define.
	(STARTFILE_SPEC): Use %(startfile_vtv).
	(ENDFILE_SPEC): Use %(endfile_vtv).
	(SUBTARGET_EXTRA_SPECS): Handle STARTFILE_VTV_SPEC,
	ENDFILE_VTV_SPEC.

	* gcc.c (LINK_COMMAND_SPEC): Move VTABLE_VERIFICATION_SPEC after %{L*}.

From-SVN: r230865

7 files changed, 1055 insertions, 1030 deletions

diff --git a/libvtv/ChangeLog b/libvtv/ChangeLog
index 4f216ac7703..02dba258e16 100644
--- a/libvtv/ChangeLog
+++ b/libvtv/ChangeLog
@@ -1,3 +1,30 @@
+2015-11-25  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* configure.tgt (*-*-solaris2.[1-9]*): Declare supported.
+	* configure.ac: Call AC_USE_SYSTEM_EXTENSIONS.
+	<*-*-solaris2*>: Check for init priority support.
+	Check for getexecname, __fortify_fail, _obstack_begin.
+	(VTV_NO_OBSTACK): New conditional.
+	* configure: Regenerate.
+	* Makefile.am [VTV_NO_OBSTACK] (obstack.c): Use new condition.
+	Create empty config.h
+	* Makefile.in: Regenerate.
+
+	* vtv_rts.cc [HAVE_GETEXECNAME] (program_invocation_name): New
+	variable.
+	(read_section_offset_and_length) [HAVE_GETEXECNAME]: Set it.
+	(dl_iterate_phdr_callback) [HAVE_GETEXECNAME]: Set it.
+
+	(__fortify_fail): Wrap in HAVE___FORTIFY_FAIL
+	[!HAVE___FORTIFY_FAIL]: Provide non-Cygwin implementation.
+
+	(read_section_offset_and_length): Assert sh_size >= VTV_PAGE_SIZE.
+	(iterate_modules): Fix typo.
+	Use VTV_PAGE_SIZE.
+	(dl_iterate_phdr_callback): Fix typo.
+	Use VTV_PAGE_SIZE.
+	(__VLTChangePermission): Fix typos.
+
 2015-11-09  Alan Modra  <amodra@gmail.com>
 
 	* vtv_malloc.cc (obstack_chunk_free): Correct param type.
diff --git a/libvtv/Makefile.am b/libvtv/Makefile.am
index 24ee90158e8..edfd5ae13d7 100644
--- a/libvtv/Makefile.am
+++ b/libvtv/Makefile.am
@@ -76,11 +76,14 @@ vtv_end.c:
 	rm -f $@
 	$(LN_S) $(toplevel_srcdir)/libgcc/vtv_end.c $@
 
-if VTV_CYGMIN
+if VTV_NO_OBSTACK
   obstack.c:
 	  rm -f $@
 	  $(LN_S) $(toplevel_srcdir)/libiberty/obstack.c $@
-  
+	  > config.h
+endif
+
+if VTV_CYGMIN
   vtv_stubs.cc:
 	  rm -f $@
 	  $(LN_S) $(toplevel_srcdir)/libstdc++-v3/libsupc++/vtv_stubs.cc $@
@@ -93,11 +96,12 @@ if VTV_CYGMIN
 endif
 
 if ENABLE_VTABLE_VERIFY
+  libvtv_la_SOURCES = $(vtv_sources)
+if VTV_NO_OBSTACK
+  libvtv_la_SOURCES += obstack.c
+endif
 if VTV_CYGMIN
-  libvtv_la_SOURCES = $(vtv_sources) obstack.c
   libvtv_stubs_la_SOURCES = $(vtv_stubs_sources)
-else
-  libvtv_la_SOURCES = $(vtv_sources)
 endif
   libvtv_include_HEADERS = $(vtv_headers)
 else
diff --git a/libvtv/Makefile.in b/libvtv/Makefile.in
index 13c6afd6fce..4c8c3fb078e 100644
--- a/libvtv/Makefile.in
+++ b/libvtv/Makefile.in
@@ -53,6 +53,7 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
+@ENABLE_VTABLE_VERIFY_TRUE@@VTV_NO_OBSTACK_TRUE@am__append_1 = obstack.c
 subdir = .
 DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
 	$(top_srcdir)/configure $(am__configure_deps) \
@@ -110,11 +111,10 @@ LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
 libvtv_la_DEPENDENCIES =
 am__objects_1 = vtv_start.lo vtv_malloc.lo vtv_rts.lo vtv_utils.lo \
 	vtv_end.lo
-@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_FALSE@am_libvtv_la_OBJECTS =  \
-@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_FALSE@	$(am__objects_1)
-@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_TRUE@am_libvtv_la_OBJECTS =  \
-@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_TRUE@	$(am__objects_1) \
-@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_TRUE@	obstack.lo
+@ENABLE_VTABLE_VERIFY_TRUE@@VTV_NO_OBSTACK_TRUE@am__objects_2 =  \
+@ENABLE_VTABLE_VERIFY_TRUE@@VTV_NO_OBSTACK_TRUE@	obstack.lo
+@ENABLE_VTABLE_VERIFY_TRUE@am_libvtv_la_OBJECTS = $(am__objects_1) \
+@ENABLE_VTABLE_VERIFY_TRUE@	$(am__objects_2)
 libvtv_la_OBJECTS = $(am_libvtv_la_OBJECTS)
 libvtv_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
@@ -122,9 +122,9 @@ libvtv_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
 @VTV_CYGMIN_FALSE@am_libvtv_la_rpath = -rpath $(toolexeclibdir)
 @VTV_CYGMIN_TRUE@am_libvtv_la_rpath = -rpath $(toolexeclibdir)
 libvtv_stubs_la_LIBADD =
-am__objects_2 = vtv_start.lo vtv_stubs.lo vtv_end.lo
+am__objects_3 = vtv_start.lo vtv_stubs.lo vtv_end.lo
 @ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_TRUE@am_libvtv_stubs_la_OBJECTS =  \
-@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_TRUE@	$(am__objects_2)
+@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_TRUE@	$(am__objects_3)
 libvtv_stubs_la_OBJECTS = $(am_libvtv_stubs_la_OBJECTS)
 libvtv_stubs_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
@@ -353,8 +353,8 @@ BUILT_SOURCES = vtv_start.c vtv_end.c
 @VTV_CYGMIN_TRUE@libvtv_la_LDFLAGS = $(lt_host_flags)
 @VTV_CYGMIN_TRUE@libvtv_stubs_la_LDFLAGS = $(lt_host_flags)
 @ENABLE_VTABLE_VERIFY_FALSE@libvtv_la_SOURCES = 
-@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_FALSE@libvtv_la_SOURCES = $(vtv_sources)
-@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_TRUE@libvtv_la_SOURCES = $(vtv_sources) obstack.c
+@ENABLE_VTABLE_VERIFY_TRUE@libvtv_la_SOURCES = $(vtv_sources) \
+@ENABLE_VTABLE_VERIFY_TRUE@	$(am__append_1)
 @ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_TRUE@libvtv_stubs_la_SOURCES = $(vtv_stubs_sources)
 @ENABLE_VTABLE_VERIFY_FALSE@libvtv_include_HEADERS = 
 @ENABLE_VTABLE_VERIFY_TRUE@libvtv_include_HEADERS = $(vtv_headers)
@@ -832,9 +832,10 @@ vtv_end.c:
 	rm -f $@
 	$(LN_S) $(toplevel_srcdir)/libgcc/vtv_end.c $@
 
-@VTV_CYGMIN_TRUE@  obstack.c:
-@VTV_CYGMIN_TRUE@	  rm -f $@
-@VTV_CYGMIN_TRUE@	  $(LN_S) $(toplevel_srcdir)/libiberty/obstack.c $@
+@VTV_NO_OBSTACK_TRUE@  obstack.c:
+@VTV_NO_OBSTACK_TRUE@	  rm -f $@
+@VTV_NO_OBSTACK_TRUE@	  $(LN_S) $(toplevel_srcdir)/libiberty/obstack.c $@
+@VTV_NO_OBSTACK_TRUE@	  > config.h
 
 @VTV_CYGMIN_TRUE@  vtv_stubs.cc:
 @VTV_CYGMIN_TRUE@	  rm -f $@
diff --git a/libvtv/configure b/libvtv/configure
index c38118cf843..64439f0906b 100755
--- a/libvtv/configure
+++ b/libvtv/configure
@@ -602,6 +602,8 @@ ac_subst_vars='am__EXEEXT_FALSE
 am__EXEEXT_TRUE
 LTLIBOBJS
 LIBOBJS
+VTV_NO_OBSTACK_FALSE
+VTV_NO_OBSTACK_TRUE
 VTV_CYGMIN_FALSE
 VTV_CYGMIN_TRUE
 XCFLAGS
@@ -635,26 +637,6 @@ CXXDEPMODE
 ac_ct_CXX
 CXXFLAGS
 CXX
-EGREP
-GREP
-CPP
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-am__nodep
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
 toolexeclibdir
 toolexecdir
 toplevel_srcdir
@@ -665,6 +647,16 @@ MAINT
 MAINTAINER_MODE_FALSE
 MAINTAINER_MODE_TRUE
 multi_basedir
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
 am__untar
 am__tar
 AMTAR
@@ -690,6 +682,16 @@ INSTALL_SCRIPT
 INSTALL_PROGRAM
 ENABLE_VTABLE_VERIFY_FALSE
 ENABLE_VTABLE_VERIFY_TRUE
+EGREP
+GREP
+CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
 LIBSTDCXX_RAW_CXX_LDFLAGS
 LIBSTDCXX_RAW_CXX_CXXFLAGS
 target_noncanonical
@@ -748,9 +750,9 @@ ac_user_opts='
 enable_option_checking
 enable_version_specific_runtime_libs
 enable_vtable_verify
+enable_dependency_tracking
 enable_multilib
 enable_maintainer_mode
-enable_dependency_tracking
 enable_shared
 enable_static
 with_pic
@@ -1390,11 +1392,11 @@ Optional Features:
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-version-specific-runtime-libs    Specify that runtime libraries should be installed in a compiler-specific directory
   --enable-vtable-verify    Enable vtable verification feature
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
   --enable-multilib       build many library versions (default)
   --enable-maintainer-mode  enable make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors
   --enable-shared[=PKGS]  build shared libraries [default=yes]
   --enable-static[=PKGS]  build static libraries [default=yes]
   --enable-fast-install[=PKGS]
@@ -2514,699 +2516,6 @@ esac
 
 
 
-# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for --enable-vtable-verify" >&5
-$as_echo_n "checking for --enable-vtable-verify... " >&6; }
-# Check whether --enable-vtable-verify was given.
-if test "${enable_vtable_verify+set}" = set; then :
-  enableval=$enable_vtable_verify; case "$enableval" in
- yes) enable_vtable_verify=yes ;;
- no)  enable_vtable_verify=no ;;
- *)   enable_vtable_verify=no;;
- esac
-else
-  enable_vtable_verify=no
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_vtable_verify" >&5
-$as_echo "$enable_vtable_verify" >&6; }
-
-# See if supported.
-unset VTV_SUPPORTED
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for host support for vtable verification" >&5
-$as_echo_n "checking for host support for vtable verification... " >&6; }
-. ${srcdir}/configure.tgt
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $VTV_SUPPORTED" >&5
-$as_echo "$VTV_SUPPORTED" >&6; }
-
-# Decide if it's usable.
-use_vtable_verify=no
-if test "x$VTV_SUPPORTED" = "xyes"; then
-  if test "x$enable_vtable_verify" = "xyes"; then
-    use_vtable_verify=yes
-    { $as_echo "$as_me:${as_lineno-$LINENO}: using vtable verification" >&5
-$as_echo "$as_me: using vtable verification" >&6;}
-  fi
-fi
- if test $use_vtable_verify = yes; then
-  ENABLE_VTABLE_VERIFY_TRUE=
-  ENABLE_VTABLE_VERIFY_FALSE='#'
-else
-  ENABLE_VTABLE_VERIFY_TRUE='#'
-  ENABLE_VTABLE_VERIFY_FALSE=
-fi
-
-
-am__api_version='1.11'
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
-  ./ | .// | /[cC]/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    rm -rf conftest.one conftest.two conftest.dir
-	    echo one > conftest.one
-	    echo two > conftest.two
-	    mkdir conftest.dir
-	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-	      test -s conftest.one && test -s conftest.two &&
-	      test -s conftest.dir/conftest.one &&
-	      test -s conftest.dir/conftest.two
-	    then
-	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	      break 3
-	    fi
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-
-  done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
-esac
-case $srcdir in
-  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
-   fi
-
-   test "$2" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   as_fn_error "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-test "$program_prefix" != NONE &&
-  program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in mkdir gmkdir; do
-	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
-	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-	     'mkdir (GNU coreutils) '* | \
-	     'mkdir (coreutils) '* | \
-	     'mkdir (fileutils) '4.1*)
-	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
-	       break 3;;
-	   esac
-	 done
-       done
-  done
-IFS=$as_save_IFS
-
-fi
-
-  if test "${ac_cv_path_mkdir+set}" = set; then
-    MKDIR_P="$ac_cv_path_mkdir -p"
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for MKDIR_P within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    test -d ./--version && rmdir ./--version
-    MKDIR_P="$ac_install_sh -d"
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  [\\/$]* | ?:[\\/]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-for ac_prog in gawk mawk nawk awk
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
-	@echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
-  *@@@%%%=?*=@@@%%%*)
-    eval ac_cv_prog_make_${ac_make}_set=yes;;
-  *)
-    eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-  SET_MAKE=
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  am__isrc=' -I$(srcdir)'
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='libvtv'
- VERSION='1.0'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.  Yes, it's still used
-# in the wild :-(  We should find a proper way to deprecate it ...
-AMTAR='$${TAR-tar}'
-
-am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
-
-
-
-
-
-# Default to --enable-multilib
-# Check whether --enable-multilib was given.
-if test "${enable_multilib+set}" = set; then :
-  enableval=$enable_multilib; case "$enableval" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   as_fn_error "bad value $enableval for multilib option" "$LINENO" 5 ;;
- esac
-else
-  multilib=yes
-fi
-
-
-# We may get other options which we leave undocumented:
-# --with-target-subdir, --with-multisrctop, --with-multisubdir
-# See config-ml.in if you want the gory details.
-
-if test "$srcdir" = "."; then
-  if test "$with_target_subdir" != "."; then
-    multi_basedir="$srcdir/$with_multisrctop../.."
-  else
-    multi_basedir="$srcdir/$with_multisrctop.."
-  fi
-else
-  multi_basedir="$srcdir/.."
-fi
-
-
-# Even if the default multilib is not a cross compilation,
-# it may be that some of the other multilibs are.
-if test $cross_compiling = no && test $multilib = yes \
-   && test "x${with_multisubdir}" != x ; then
-   cross_compiling=maybe
-fi
-
-ac_config_commands="$ac_config_commands default-1"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
-    # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then :
-  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
-$as_echo "$USE_MAINTAINER_MODE" >&6; }
-   if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-
-  MAINT=$MAINTAINER_MODE_TRUE
-
-
-
-
-
-  # These need to be absolute paths, yet at the same time need to
-  # canonicalize only relative paths, because then amd will not unmount
-  # drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
-  libvtv_builddir=`${PWDCMD-pwd}`
-  case $srcdir in
-    \\/$* | ?:\\/*) libvtv_srcdir=${srcdir} ;;
-    *) libvtv_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
-  esac
-  toplevel_builddir=${libvtv_builddir}/..
-  toplevel_srcdir=${libvtv_srcdir}/..
-
-
-
-
-
-
-# Calculate toolexeclibdir
-# Also toolexecdir, though it's only used in toolexeclibdir
-case ${version_specific_libs} in
-  yes)
-    # Need the gcc compiler version to know where to install libraries
-    # and header files if --enable-version-specific-runtime-libs option
-    # is selected.
-    toolexecdir='$(libdir)/gcc/$(target_alias)'
-    toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
-    ;;
-  no)
-    if test -n "$with_cross_host" &&
-       test x"$with_cross_host" != x"no"; then
-      # Install a library built with a cross compiler in tooldir, not libdir.
-      toolexecdir='$(exec_prefix)/$(target_alias)'
-      toolexeclibdir='$(toolexecdir)/lib'
-    else
-      toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
-      toolexeclibdir='$(libdir)'
-    fi
-    multi_os_directory=`$CC -print-multi-os-directory`
-    case $multi_os_directory in
-      .) ;; # Avoid trailing /.
-      *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
-    esac
-    ;;
-esac
-
-
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
-  enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-  am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
-else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
-fi
-
-
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3972,134 +3281,6 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-depcc="$CC"   am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  am__universal=false
-  case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CC_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
-fi
-
-
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -4561,6 +3742,865 @@ $as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
 
 
 
+# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for --enable-vtable-verify" >&5
+$as_echo_n "checking for --enable-vtable-verify... " >&6; }
+# Check whether --enable-vtable-verify was given.
+if test "${enable_vtable_verify+set}" = set; then :
+  enableval=$enable_vtable_verify; case "$enableval" in
+ yes) enable_vtable_verify=yes ;;
+ no)  enable_vtable_verify=no ;;
+ *)   enable_vtable_verify=no;;
+ esac
+else
+  enable_vtable_verify=no
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_vtable_verify" >&5
+$as_echo "$enable_vtable_verify" >&6; }
+
+# See if supported.
+unset VTV_SUPPORTED
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for host support for vtable verification" >&5
+$as_echo_n "checking for host support for vtable verification... " >&6; }
+. ${srcdir}/configure.tgt
+case ${host} in
+  *-*-solaris2*)
+    # libvtv requires init priority support, which depends on the linker
+    # used on Solaris.
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for init priority support" >&5
+$as_echo_n "checking for init priority support... " >&6; }
+if test "${libvtv_cv_init_priority+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+void ip (void) __attribute__ ((constructor (1)));
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  libgcc_cv_init_priority=yes
+else
+  libgcc_cv_init_priority=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libvtv_cv_init_priority" >&5
+$as_echo "$libvtv_cv_init_priority" >&6; }
+    if test x$libvtv_cv_init_priority = xno; then
+      VTV_SUPPORTED=no
+    fi
+    # FIXME: Maybe check for dl_iterate_phdr, too?  Should be covered by
+    # configure.tgt restricting to libvtv to Solaris 11+.
+    ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $VTV_SUPPORTED" >&5
+$as_echo "$VTV_SUPPORTED" >&6; }
+
+# Decide if it's usable.
+use_vtable_verify=no
+if test "x$VTV_SUPPORTED" = "xyes"; then
+  if test "x$enable_vtable_verify" = "xyes"; then
+    use_vtable_verify=yes
+    { $as_echo "$as_me:${as_lineno-$LINENO}: using vtable verification" >&5
+$as_echo "$as_me: using vtable verification" >&6;}
+  fi
+fi
+ if test $use_vtable_verify = yes; then
+  ENABLE_VTABLE_VERIFY_TRUE=
+  ENABLE_VTABLE_VERIFY_FALSE='#'
+else
+  ENABLE_VTABLE_VERIFY_TRUE='#'
+  ENABLE_VTABLE_VERIFY_FALSE=
+fi
+
+
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if test "${ac_cv_path_mkdir+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    test -d ./--version && rmdir ./--version
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libvtv'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+# Default to --enable-multilib
+# Check whether --enable-multilib was given.
+if test "${enable_multilib+set}" = set; then :
+  enableval=$enable_multilib; case "$enableval" in
+  yes) multilib=yes ;;
+  no)  multilib=no ;;
+  *)   as_fn_error "bad value $enableval for multilib option" "$LINENO" 5 ;;
+ esac
+else
+  multilib=yes
+fi
+
+
+# We may get other options which we leave undocumented:
+# --with-target-subdir, --with-multisrctop, --with-multisubdir
+# See config-ml.in if you want the gory details.
+
+if test "$srcdir" = "."; then
+  if test "$with_target_subdir" != "."; then
+    multi_basedir="$srcdir/$with_multisrctop../.."
+  else
+    multi_basedir="$srcdir/$with_multisrctop.."
+  fi
+else
+  multi_basedir="$srcdir/.."
+fi
+
+
+# Even if the default multilib is not a cross compilation,
+# it may be that some of the other multilibs are.
+if test $cross_compiling = no && test $multilib = yes \
+   && test "x${with_multisubdir}" != x ; then
+   cross_compiling=maybe
+fi
+
+ac_config_commands="$ac_config_commands default-1"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+    # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+   if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
+
+  MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+
+
+  # These need to be absolute paths, yet at the same time need to
+  # canonicalize only relative paths, because then amd will not unmount
+  # drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
+  libvtv_builddir=`${PWDCMD-pwd}`
+  case $srcdir in
+    \\/$* | ?:\\/*) libvtv_srcdir=${srcdir} ;;
+    *) libvtv_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
+  esac
+  toplevel_builddir=${libvtv_builddir}/..
+  toplevel_srcdir=${libvtv_srcdir}/..
+
+
+
+
+
+
+# Calculate toolexeclibdir
+# Also toolexecdir, though it's only used in toolexeclibdir
+case ${version_specific_libs} in
+  yes)
+    # Need the gcc compiler version to know where to install libraries
+    # and header files if --enable-version-specific-runtime-libs option
+    # is selected.
+    toolexecdir='$(libdir)/gcc/$(target_alias)'
+    toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
+    ;;
+  no)
+    if test -n "$with_cross_host" &&
+       test x"$with_cross_host" != x"no"; then
+      # Install a library built with a cross compiler in tooldir, not libdir.
+      toolexecdir='$(exec_prefix)/$(target_alias)'
+      toolexeclibdir='$(toolexecdir)/lib'
+    else
+      toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+      toolexeclibdir='$(libdir)'
+    fi
+    multi_os_directory=`$CC -print-multi-os-directory`
+    case $multi_os_directory in
+      .) ;; # Avoid trailing /.
+      *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+    esac
+    ;;
+esac
+
+
+
+
 for ac_func in __secure_getenv
 do :
   ac_fn_c_check_func "$LINENO" "__secure_getenv" "ac_cv_func___secure_getenv"
@@ -4586,6 +4626,20 @@ fi
 done
 
 
+for ac_func in getexecname __fortify_fail
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+   if test "x$as_val" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
 # Check for programs.
 
 
@@ -5129,134 +5183,6 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-depcc="$CC"   am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  am__universal=false
-  case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CC_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
-fi
-
-
 ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -12135,7 +12061,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12138 "configure"
+#line 12064 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12241,7 +12167,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12244 "configure"
+#line 12170 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -15558,6 +15484,26 @@ else
 fi
 
 
+for ac_func in _obstack_begin
+do :
+  ac_fn_c_check_func "$LINENO" "_obstack_begin" "ac_cv_func__obstack_begin"
+if test "x$ac_cv_func__obstack_begin" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE__OBSTACK_BEGIN 1
+_ACEOF
+
+fi
+done
+
+ if test $ac_cv_func__obstack_begin = no; then
+  VTV_NO_OBSTACK_TRUE=
+  VTV_NO_OBSTACK_FALSE='#'
+else
+  VTV_NO_OBSTACK_TRUE='#'
+  VTV_NO_OBSTACK_FALSE=
+fi
+
+
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -15695,6 +15641,14 @@ if test -z "${ENABLE_VTABLE_VERIFY_TRUE}" && test -z "${ENABLE_VTABLE_VERIFY_FAL
   as_fn_error "conditional \"ENABLE_VTABLE_VERIFY\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
@@ -15707,18 +15661,6 @@ if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
   as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  as_fn_error "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
 if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
   as_fn_error "conditional \"am__fastdepCXX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
@@ -15727,6 +15669,10 @@ if test -z "${VTV_CYGMIN_TRUE}" && test -z "${VTV_CYGMIN_FALSE}"; then
   as_fn_error "conditional \"VTV_CYGMIN\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
+if test -z "${VTV_NO_OBSTACK_TRUE}" && test -z "${VTV_NO_OBSTACK_FALSE}"; then
+  as_fn_error "conditional \"VTV_NO_OBSTACK\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
 
 : ${CONFIG_STATUS=./config.status}
 ac_write_fail=0
@@ -16292,6 +16238,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #
 # INIT-COMMANDS
 #
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 srcdir="$srcdir"
 host="$host"
@@ -16306,7 +16253,6 @@ CC="$CC"
 CXX="$CXX"
 GFORTRAN="$GFORTRAN"
 GCJ="$GCJ"
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
@@ -16676,8 +16622,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 for ac_config_target in $ac_config_targets
 do
   case $ac_config_target in
-    "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
     "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
@@ -17099,14 +17045,6 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
 
 
   case $ac_file$ac_mode in
-    "default-1":C)
-# Only add multilib support code if we just rebuilt the top-level
-# Makefile.
-case " $CONFIG_FILES " in
- *" Makefile "*)
-   ac_file=Makefile . ${multi_basedir}/config-ml.in
-   ;;
-esac ;;
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
   # Autoconf 2.62 quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
@@ -17202,6 +17140,14 @@ $as_echo X"$file" |
   done
 }
  ;;
+    "default-1":C)
+# Only add multilib support code if we just rebuilt the top-level
+# Makefile.
+case " $CONFIG_FILES " in
+ *" Makefile "*)
+   ac_file=Makefile . ${multi_basedir}/config-ml.in
+   ;;
+esac ;;
     "libtool":C)
 
     # See if we are running on zsh, and set the options which allow our
diff --git a/libvtv/configure.ac b/libvtv/configure.ac
index f0af8ede0c4..32dc21aac64 100644
--- a/libvtv/configure.ac
+++ b/libvtv/configure.ac
@@ -27,6 +27,8 @@ target_alias=${target_alias-$host_alias}
 AC_SUBST(target_alias)
 GCC_LIBSTDCXX_RAW_CXX_FLAGS
 
+AC_USE_SYSTEM_EXTENSIONS
+
 # Use same top-level configure hooks in libgcc/libstdc++/libvtv.
 AC_MSG_CHECKING([for --enable-vtable-verify])
 AC_ARG_ENABLE(vtable-verify,
@@ -43,6 +45,21 @@ AC_MSG_RESULT($enable_vtable_verify)
 unset VTV_SUPPORTED
 AC_MSG_CHECKING([for host support for vtable verification])
 . ${srcdir}/configure.tgt
+case ${host} in
+  *-*-solaris2*)
+    # libvtv requires init priority support, which depends on the linker
+    # used on Solaris.
+    AC_CACHE_CHECK(for init priority support, libvtv_cv_init_priority, [
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM(,
+      [[void ip (void) __attribute__ ((constructor (1)));]])],
+      [libgcc_cv_init_priority=yes],[libgcc_cv_init_priority=no])])
+    if test x$libvtv_cv_init_priority = xno; then
+      VTV_SUPPORTED=no
+    fi
+    # FIXME: Maybe check for dl_iterate_phdr, too?  Should be covered by
+    # configure.tgt restricting to libvtv to Solaris 11+.
+    ;;
+esac
 AC_MSG_RESULT($VTV_SUPPORTED)
 
 # Decide if it's usable.
@@ -97,6 +114,8 @@ AC_CHECK_FUNCS([__secure_getenv])
 AC_GNU_SOURCE
 AC_CHECK_FUNCS([secure_getenv])
 
+AC_CHECK_FUNCS([getexecname __fortify_fail])
+
 # Check for programs.
 m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
 m4_define([_AC_ARG_VAR_PRECIOUS],[])
@@ -167,4 +186,7 @@ esac
 
 AM_CONDITIONAL(VTV_CYGMIN, test $vtv_cygmin = yes)
 
+AC_CHECK_FUNCS([_obstack_begin])
+AM_CONDITIONAL(VTV_NO_OBSTACK, test $ac_cv_func__obstack_begin = no)
+
 AC_OUTPUT
diff --git a/libvtv/configure.tgt b/libvtv/configure.tgt
index adcff5c50ce..d63904d07fa 100644
--- a/libvtv/configure.tgt
+++ b/libvtv/configure.tgt
@@ -23,6 +23,12 @@ VTV_SUPPORTED=no
 case "${target}" in
   *-*-*android*)
 	;;
+  *-*-solaris2.1[1-9]*)
+        # Vtable verification requires constructor priority support and
+        # dl_iterate_phdr.  The former requires a dynamic check in
+        # configure.ac, the latter is fully present in Solaris 11 only.
+	VTV_SUPPORTED=yes
+	;;
   x86_64-*-linux* | i?86-*-linux*)
 	VTV_SUPPORTED=yes
 	;;
diff --git a/libvtv/vtv_rts.cc b/libvtv/vtv_rts.cc
index be60ba5f716..ccc777b4161 100644
--- a/libvtv/vtv_rts.cc
+++ b/libvtv/vtv_rts.cc
@@ -150,13 +150,11 @@
 
 #include "vtv-change-permission.h"
 
-#if defined (__CYGWIN__) || defined (__MINGW32__)
-// porting: fix link error to libc
-void __fortify_fail (const char * msg){
-    OutputDebugString(msg);
-    abort();
-}
-#else
+#ifdef HAVE_GETEXECNAME
+const char *program_invocation_name;
+#endif
+
+#ifdef HAVE___FORTIFY_FAIL
 extern "C" {
 
   /* __fortify_fail is a function in glibc that calls __libc_message,
@@ -173,6 +171,20 @@ extern "C" {
   extern void __fortify_fail (const char *) __attribute__((noreturn));
 
 } /* extern "C" */
+#else
+#if defined (__CYGWIN__) || defined (__MINGW32__)
+// porting: fix link error to libc
+void __fortify_fail (const char * msg){
+    OutputDebugString(msg);
+    abort();
+}
+#else
+// FIXME: Provide backtrace via libbacktrace?
+void __fortify_fail (const char *msg) {
+    write (2, msg, strlen (msg));
+    abort ();
+}
+#endif
 #endif
 
 /* The following variables are used only for debugging and performance
@@ -573,6 +585,9 @@ read_section_offset_and_length (struct dl_phdr_info *info,
   /* Get the name of the main executable.  This may or may not include
      arguments passed to the program.  Find the first space, assume it
      is the start of the argument list, and change it to a '\0'. */
+#ifdef HAVE_GETEXECNAME
+  program_invocation_name = getexecname ();
+#endif
   snprintf (program_name, sizeof (program_name), program_invocation_name);
 
   /* Check to see if we already have the data for this file.  */
@@ -663,7 +678,10 @@ read_section_offset_and_length (struct dl_phdr_info *info,
                      size.  */
                   *sect_offset = sect_hdr.sh_addr;
 		  if (!is_libvtv)
-		    *sect_len = sect_hdr.sh_size - VTV_PAGE_SIZE;
+		    {
+		      VTV_ASSERT (sect_hdr.sh_size - VTV_PAGE_SIZE >= 0);
+		      *sect_len = sect_hdr.sh_size - VTV_PAGE_SIZE;
+		    }
 		  else
 		    *sect_len = sect_hdr.sh_size;
                   found = true;
@@ -784,7 +802,7 @@ iterate_modules (void *data)
                       if (debug_functions)
                         {
                           snprintf (buffer, sizeof (buffer),
-                                    "Failed called to mprotect for %s error: ",
+                                    "Failed call to mprotect for %s error: ",
                                     (*mprotect_flags & PROT_WRITE) ?
                                     "READ/WRITE" : "READ-ONLY");
                           log_memory_protection_data (buffer);
@@ -804,9 +822,8 @@ iterate_modules (void *data)
                         }
                     }
                   increment_num_calls (&num_calls_to_mprotect);
-                  /* num_pages_protected += (map_sect_len + VTV_PAGE_SIZE - 1) 
-                                            / VTV_PAGE_SIZE; */
-                  num_pages_protected += (map_sect_len + 4096 - 1) / 4096;
+                  num_pages_protected += (map_sect_len + VTV_PAGE_SIZE - 1) 
+		    / VTV_PAGE_SIZE;
                   continue;
                 }
             }
@@ -853,6 +870,9 @@ dl_iterate_phdr_callback (struct dl_phdr_info *info, size_t, void *data)
   /* Get the name of the main executable.  This may or may not include
      arguments passed to the program.  Find the first space, assume it
      is the start of the argument list, and change it to a '\0'. */
+#ifdef HAVE_GETEXECNAME
+  program_invocation_name = getexecname ();
+#endif
   snprintf (program_name, sizeof (program_name), program_invocation_name);
 
   read_section_offset_and_length (info, map_sect_name, *mprotect_flags,
@@ -896,7 +916,7 @@ dl_iterate_phdr_callback (struct dl_phdr_info *info, size_t, void *data)
           if (debug_functions)
             {
               snprintf (buffer, sizeof (buffer),
-                        "Failed called to mprotect for %s error: ",
+                        "Failed call to mprotect for %s error: ",
                         (*mprotect_flags & PROT_WRITE) ?
                         "READ/WRITE" : "READ-ONLY");
               log_memory_protection_data (buffer);
@@ -916,8 +936,7 @@ dl_iterate_phdr_callback (struct dl_phdr_info *info, size_t, void *data)
             }
         }
       increment_num_calls (&num_calls_to_mprotect);
-      /* num_pages_protected += (map_sect_len + VTV_PAGE_SIZE - 1) / VTV_PAGE_SIZE; */
-      num_pages_protected += (map_sect_len + 4096 - 1) / 4096;
+      num_pages_protected += (map_sect_len + VTV_PAGE_SIZE - 1) / VTV_PAGE_SIZE;
     }
 
   return 0;
@@ -1054,9 +1073,9 @@ __VLTChangePermission (int perm)
   if (debug_functions)
     {
       if (perm == __VLTP_READ_WRITE)
-	fprintf (stdout, "Changing VLT permisisons to Read-Write.\n");
+	fprintf (stdout, "Changing VLT permissions to Read-Write.\n");
       else if (perm == __VLTP_READ_ONLY)
-	fprintf (stdout, "Changing VLT permissions to Read-only.\n");
+	fprintf (stdout, "Changing VLT permissions to Read-Only.\n");
 
       else
 	fprintf (stdout, "Unrecognized permissions value: %d\n", perm);