summaryrefslogtreecommitdiff
path: root/drivers/perf
AgeCommit message (Collapse)Author
2022-09-23Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "These are all very simple and self-contained, although the CFI jump-table fix touches the generic linker script as that's where the problematic macro lives. - Fix false positive "sleeping while atomic" warning resulting from the kPTI rework taking a mutex too early. - Fix possible overflow in AMU frequency calculation - Fix incorrect shift in CMN PMU driver which causes problems with newer versions of the IP - Reduce alignment of the CFI jump table to avoid huge kernel images and link errors with !4KiB page size configurations" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment perf/arm-cmn: Add more bits to child node address offset field arm64: topology: fix possible overflow in amu_fie_setup() arm64: mm: don't acquire mutex when rewriting swapper
2022-09-22perf/arm-cmn: Add more bits to child node address offset fieldIlkka Koskinen
CMN-600 uses bits [27:0] for child node address offset while bits [30:28] are required to be zero. For CMN-650, the child node address offset field has been increased to include bits [29:0] while leaving only bit 30 set to zero. Let's include the missing two bits and assume older implementations comply with the spec and set bits [29:28] to 0. Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220808195455.79277-1-ilkka@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org>
2022-09-09Merge tag 'riscv-for-linus-6.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A pair of device tree fixes for the Polarfire SOC - A fix to avoid overflowing the PMU counter array when firmware incorrectly reports the number of supported counters, which manifests on OpenSBI versions prior to 1.1 * tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: perf: RISC-V: fix access beyond allocated array riscv: dts: microchip: use an mpfs specific l2 compatible dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
2022-09-08perf: RISC-V: fix access beyond allocated arraySergey Matyukevich
SBI firmware should report total number of firmware and hardware counters including unused ones or special ones. In this case the kernel doesn't need to make any assumptions about gaps in reported counters, e.g. excluded timer counter. That was fixed in OpenSBI v1.1 by commit 3f66465fb6bf ("lib: pmu: allow to use the highest available counter"). This kernel patch has no effect if SBI firmware behaves correctly. However it eliminates access beyond the allocated pmu_ctr_list if the kernel is used with OpenSBI older than v1.1. Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220830155306.301714-2-geomatsi@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-02Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "It's a lot smaller than last week, with the star of the show being a couple of fixes to head.S addressing a boot regression introduced by the recent overhaul of that code in non-default configurations (i.e. KASLR disabled). The first of those two resolves the issue reported (and bisected) by Mikulus in the wait_on_bit() thread. Summary: - Fix two boot issues caused by the recent head.S rework when !KASLR - Fix calculation of crashkernel memory reservation - Fix bogus error check in PMU IRQ probing code" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Reserve enough pages for the initial ID map perf/arm_pmu_platform: fix tests for platform_get_irq() failure arm64: head: Ignore bogus KASLR displacement on non-relocatable kernels arm64/kexec: Fix missing extra range for crashkres_low.
2022-09-01perf/arm_pmu_platform: fix tests for platform_get_irq() failureYu Zhe
The platform_get_irq() returns negative error codes. It can't actually return zero. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Link: https://lore.kernel.org/r/20220825011844.8536-1-yuzhe@nfschina.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-18perf: riscv legacy: fix kerneldoc comment warningConor Dooley
Fix the warning: drivers/perf/riscv_pmu_legacy.c:76: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Fixes: 9b3e150e310e ("RISC-V: Add a simple platform driver for RISC-V legacy perf") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220812143532.1962623-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12perf: riscv_pmu{,_sbi}: Miscallenous improvement & fixesPalmer Dabbelt
A series of mostly-independent fixes and cleanups for the RISC-V PMU drivers. Link: https://lore.kernel.org/lkml/CAAhSdy23vE8+HxU5Jxy2rBMjy3rBTrJt_4sriuROac_sEESSVw@mail.gmail.com/T/#m9de15aef1b65ae6155fa33ea1239578ef463c2a2 * palmer/riscv-pmu: RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32
2022-08-11RISC-V: Move counter info definition to sbi header fileAtish Patra
Counter info encoding format is defined by the SBI specificaiton. KVM implementation of SBI PMU extension will also leverage this definition. Move the definition to common sbi header file from the sbi pmu driver. Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220711174632.4186047-5-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Fix SBI PMU calls for RV32Atish Patra
Some of the SBI PMU calls does not pass 64bit arguments correctly and not under RV32 compile time flags. Currently, this doesn't create any incorrect results as RV64 ignores any value in the additional register and qemu doesn't support raw events. Fix those SBI calls in order to set correct values for RV32. Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Signed-off-by: Atish Patra <atishp@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-4-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Update user page mapping only once during startAtish Patra
Currently, riscv_pmu_event_set_period updates the userpage mapping. However, the caller of riscv_pmu_event_set_period should update the userpage mapping because the counter can not be updated/started from set_period function in counter overflow path. Invoke the perf_event_update_userpage at the caller so that it doesn't get invoked twice during counter start path. Fixes: f5bfa23f576f ("RISC-V: Add a perf core library for pmu drivers") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-3-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Fix counter restart during overflow for RV32Atish Patra
Pass the upper half of the initial value of the counter correctly for RV32. Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support") Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-2-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-19drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CXAnshuman Khandual
The arm_spe_pmu driver will enable SYS_PMSCR_EL1.CX in order to add CONTEXT packets into the traces, if the owner of the perf event runs with required capabilities i.e CAP_PERFMON or CAP_SYS_ADMIN via perfmon_capable() helper. The value of this bit is computed in the arm_spe_event_to_pmscr() function but the check for capabilities happens in the pmu event init callback i.e arm_spe_pmu_event_init(). This suggests that the value of the CX bit should remain consistent for the duration of the perf session. However, the function arm_spe_event_to_pmscr() may be called later during the event start callback i.e arm_spe_pmu_start() when the "current" process is not the owner of the perf session, hence the CX bit setting is currently not consistent. One way to fix this, is by caching the required value of the CX bit during the initialization of the PMU event, so that it remains consistent for the duration of the session. It uses currently unused 'event->hw.flags' element to cache perfmon_capable() value, which can be referred during event start callback to compute SYS_PMSCR_EL1.CX. This ensures consistent availability of context packets in the trace as per event owner capabilities. Drop BIT(SYS_PMSCR_EL1_CX_SHIFT) check in arm_spe_pmu_event_init(), because now CX bit cannot be set in arm_spe_event_to_pmscr() with perfmon_capable() disabled. Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension") Reported-by: German Gomez <german.gomez@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20220714061302.2715102-1-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-07-19perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()Liang He
In pmu_sbi_setup_irqs(), we should call of_node_put() for the 'cpu' when breaking out of for_each_of_cput_node() as its refcount will be automatically increased and decreased during the iteration. Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20220715130330.443363-1-windhl@126.com Signed-off-by: Will Deacon <will@kernel.org>
2022-07-06drivers/perf: hisi: add driver for HNS3 PMUGuangbin Huang
HNS3(HiSilicon Network System 3) PMU is RCiEP device in HiSilicon SoC NIC, supports collection of performance statistics such as bandwidth, latency, packet rate and interrupt rate. NIC of each SICL has one PMU device for it. Driver registers each PMU device to perf, and exports information of supported events, filter mode of each event, bdf range, hardware clock frequency, identifier and so on via sysfs. Each PMU device has its own registers of control, counters and interrupt, and it supports 8 hardware events, each hardward event has its own registers for configuration, counters and interrupt. Filter options contains: config - select event port - select physical port of nic tc - select tc(must be used with port) func - select PF/VF queue - select queue of PF/VF(must be used with func) intr - select interrupt number(must be used with func) global - select all functions of IO DIE Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/20220628063419.38514-3-huangguangbin2@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2022-07-06drivers/perf: riscv_pmu_sbi: perf formatNikita Shubin
Update driver to export formatting and event information to sysfs so it can be used by the perf user space tools with the syntaxes: perf stat -e cpu/event=0x05 perf stat -e cpu/event=0x05,firmware=0x1/ 63-bit is used to distinguish hardware events from firmware. Firmware events are defined by "RISC-V Supervisor Binary Interface Specification". perf stat -e cpu/event=0x05,firmware=0x1/ is equivalent to perf stat -e r8000000000000005 Suggested-by: João Mário Domingos <joao.mario@tecnico.ulisboa.pt> Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Link: https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc Link: https://lore.kernel.org/r/20220628114625.166665-2-nikita.shubin@maquefel.me Signed-off-by: Will Deacon <will@kernel.org>
2022-07-06perf/arm-cci: Use the bitmap API to allocate bitmapsChristophe JAILLET
Use devm_bitmap_zalloc() instead of hand-writing it. It is less verbose and it improves the semantic. While at it, use bitmap_zero() instead of hand-writing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/fbde85a5e8ae99b10a2115d8ea1e69320a62947f.1657084786.git.christophe.jaillet@wanadoo.fr Signed-off-by: Will Deacon <will@kernel.org>
2022-07-06drivers/perf: riscv_pmu: Add riscv pmu pm notifierEric Lin
Currently, when the CPU is doing suspend to ram, we don't save pmu counter register and its content will be lost. To ensure perf profiling is not affected by suspend to ram, this patch is based on arm_pmu CPU_PM notifier and implements riscv pmu pm notifier. In the pm notifier, we stop the counter and update the counter value before suspend and start the counter after resume. Signed-off-by: Eric Lin <eric.lin@sifive.com> Link: https://lore.kernel.org/r/20220705091920.27432-1-eric.lin@sifive.com Signed-off-by: Will Deacon <will@kernel.org>
2022-06-27perf: hisi: Extract hisi_pmu_initChen Jun
Extract the initialization code of hisi_pmu->pmu into a function Signed-off-by: Chen Jun <chenjun102@huawei.com> Link: https://lore.kernel.org/r/20220516131601.48383-1-chenjun102@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2022-06-24perf/marvell_cn10k: Fix TAD PMU register offsetTanmay Jagdale
The existing offset of TAD_PRF and TAD_PFC registers are incorrect. Hence, fix with the right register offsets. Also, drop read of TAD_PRF register in tad_pmu_event_counter_start() since we don't have to preserve any bit fields and always write an updated value. Signed-off-by: Tanmay Jagdale <tanmay@marvell.com> Link: https://lore.kernel.org/r/20220614171356.773967-1-tanmay@marvell.com Signed-off-by: Will Deacon <will@kernel.org>
2022-06-24perf/marvell_cn10k: Remove useless license text when SPDX-License-Identifier ↵Christophe JAILLET
is already used An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4a8016a6da9cc6815cfa0f97ae8d3dd862797bda.1654936653.git.christophe.jaillet@wanadoo.fr Signed-off-by: Will Deacon <will@kernel.org>
2022-06-23perf/arm-cci: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-67-Julia.Lawall@inria.fr Signed-off-by: Will Deacon <will@kernel.org>
2022-06-23drivers/perf:Directly use ida_alloc()/free()keliu
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu <liuke94@huawei.com> Link: https://lore.kernel.org/r/20220519080127.147030-2-liuke94@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2022-06-23drivers/perf: Directly use ida_alloc()/free()keliu
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu <liuke94@huawei.com> Link: https://lore.kernel.org/r/20220519080127.147030-1-liuke94@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-23Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits) arm64/sysreg: Generate definitions for FAR_ELx arm64/sysreg: Generate definitions for DACR32_EL2 arm64/sysreg: Generate definitions for CSSELR_EL1 arm64/sysreg: Generate definitions for CPACR_ELx arm64/sysreg: Generate definitions for CONTEXTIDR_ELx arm64/sysreg: Generate definitions for CLIDR_EL1 arm64/sve: Move sve_free() into SVE code section arm64: Kconfig.platforms: Add comments arm64: Kconfig: Fix indentation and add comments arm64: mm: avoid writable executable mappings in kexec/hibernate code arm64: lds: move special code sections out of kernel exec segment arm64/hugetlb: Implement arm64 specific huge_ptep_get() arm64/hugetlb: Use ptep_get() to get the pte value of a huge page arm64: kdump: Do not allocate crash low memory if not needed arm64/sve: Generate ZCR definitions arm64/sme: Generate defintions for SVCR arm64/sme: Generate SMPRI_EL1 definitions arm64/sme: Automatically generate SMPRIMAP_EL2 definitions arm64/sme: Automatically generate SMIDR_EL1 defines arm64/sme: Automatically generate defines for SMCR ...
2022-05-12perf/arm-cmn: Decode CAL devices properly in debugfsRobin Murphy
The debugfs code is lazy, and since it only keeps the bottom byte of each connect_info register to save space, it also treats the whole thing as the device_type since the other bits were reserved anyway. Upon closer inspection, though, this is no longer true on newer IP versions, so let's be good and decode the exact field properly. This should help it not get confused when a Component Aggregation Layer is present (which is already implied if Node IDs are found for both device addresses represented by the next two lines of the table). Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/6a13a6128a28cfe2eec6d09cf372a167ec9c3b65.1652274773.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-11perf/arm-cmn: Fix filter_sel lookupRobin Murphy
Carefully considering the bounds of an array is all well and good, until you forget that that array also contains a NULL sentinel at the end and dereference it. So close... Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/bebba768156aa3c0757140457bdd0fec10819388.1652217788.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-10perf/marvell_cn10k: Fix tad_pmu_event_init() to check pmu type firstTanmay Jagdale
Make sure to check the pmu type first and then check event->attr.disabled. Doing so would avoid reading the disabled attribute of an event that is not handled by TAD PMU. Signed-off-by: Tanmay Jagdale <tanmay@marvell.com> Link: https://lore.kernel.org/r/20220510102657.487539-1-tanmay@marvell.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-06drivers/perf: hisi: Add Support for CPA PMUQi Liu
On HiSilicon Hip09 platform, there is a CPA (Coherency Protocol Agent) on each SICL (Super IO Cluster) which implements packet format translation, route parsing and traffic statistics. CPA PMU has 8 PMU counters and interrupt is supported to handle counter overflow. Let's support its driver under the framework of HiSilicon PMU driver. Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/20220415102352.6665-3-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-06drivers/perf: hisi: Associate PMUs in SICL with CPUs onlineQi Liu
If a PMU is in a SICL (Super IO cluster), it is not appropriate to associate this PMU with a CPU die. So we associate it with all CPUs online, rather than CPUs in the nearest SCCL. As the firmware of Hip09 platform hasn't been published yet, change of PMU driver will not influence backwards compatibility between driver and firmware. Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20220415102352.6665-2-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-06drivers/perf: arm_spe: Expose saturating counter to 16-bitShaokun Zhang
In order to acquire more accurate latency, Armv8.8[1] has defined the CountSize field to 16-bit saturating counters when it's 0b0011. Let's support this new feature and expose its to user under sysfs. [1] https://developer.arm.com/documentation/ddi0487/latest Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/20220429063307.63251-1-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-06perf/arm-cmn: Add CMN-700 supportRobin Murphy
Add the identifiers, events, and subtleties for CMN-700. Highlights include yet more options for doubling up CHI channels, which finally grows event IDs beyond 8 bits for XPs, and a new set of CML gateway nodes adding support for CXL as well as CCIX, where the Link Agent is now internal to the CMN mesh so we gain regular PMU events for that too. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Link: https://lore.kernel.org/r/cf892baa0d0258ea6cd6544b15171be0069a083a.1650320598.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-06perf/arm-cmn: Refactor occupancy filter selectorRobin Murphy
So far, DNs and HN-Fs have each had one event ralated to occupancy trackers which are filtered by a separate field. CMN-700 raises the stakes by introducing two more sets of HN-F events with corresponding additional filter fields. Prepare for this by refactoring our filter selection and tracking logic to account for multiple filter types coexisting on the same node. This need not affect the uAPI, which can just continue to encode any per-event filter setting in the "occupid" config field, even if it's technically not the most accurate name for some of them. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Link: https://lore.kernel.org/r/1aa47ba0455b144c416537f6b0e58dc93b467a00.1650320598.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-06perf/arm-cmn: Add CMN-650 supportRobin Murphy
Add the identifiers and events for CMN-650, which slots into its evolutionary position between CMN-600 and the 700-series products. Imagine CMN-600 made bigger, and with most of the rough edges smoothed off, but that then balanced out by some bonkers PMU functionality for the new HN-P enhancement in CMN-650r2. Most of the CXG events are actually common to newer revisions of CMN-600 too, so they're arguably a little late; oh well. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Link: https://lore.kernel.org/r/b0adc5824db53f71a2b561c293e2120390106536.1650320598.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-06perf: check return value of armpmu_request_irq()Ren Yu
When the function armpmu_request_irq() failed, goto err Signed-off-by: Ren Yu <renyu@nfschina.com> Link: https://lore.kernel.org/r/20220425100436.4881-1-renyu@nfschina.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-06perf: RISC-V: Remove non-kernel-doc ** commentsPalmer Dabbelt
This will presumably trip up some tools that try to parse the comments as kernel doc when they're not. Reported-by: kernel test robot <lkp@intel.com> Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support") Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> -- These recently landed in for-next, but I'm trying to avoid rewriting history as there's a lot in flight right now. Reviewed-by: Atish Patra <atishp@rivosinc.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220322220147.11407-1-palmer@rivosinc.com Signed-off-by: Will Deacon <will@kernel.org>
2022-04-13arm_pmu: Validate single/group leader eventsRob Herring
In the case where there is only a cycle counter available (i.e. PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open should fail as the event can never possibly be scheduled. However, the event validation when an event is opened is skipped when the group leader is opened. Fix this by always validating the group leader events. Reported-by: Al Grant <al.grant@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2022-04-08perf/imx_ddr: Fix undefined behavior due to shift overflowing the constantBorislav Petkov
Fix: In file included from <command-line>:0:0: In function ‘ddr_perf_counter_enable’, inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ... See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Frank Li <Frank.li@nxp.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDERGeert Uytterhoeven
The Marvell CN10K DRAM Subsystem (DSS) performance monitor is only present on Marvell CN10K SoCs. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder (incl. Marvell CN10K) SoC support, Fixes: 68fa55f0e05c ("perf/marvell: cn10k DDR perf event core ownership") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/18bfd6e1bcf67db7ea656d684a8bbb68261eeb54.1648559364.git.geert+renesas@glider.be Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04perf: qcom_l2_pmu: fix an incorrect NULL check on list iteratorXiaomeng Tong
The bug is here: return cluster; The list iterator value 'cluster' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, return 'cluster' when found, otherwise return NULL. Cc: stable@vger.kernel.org Fixes: 21bdbb7102ed ("perf: add qcom l2 cache perf events driver") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327055733.4070-1-xiam0nd.tong@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2022-03-25Merge tag 'riscv-for-linus-5.18-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for Sv57-based virtual memory. - Various improvements for the MicroChip PolarFire SOC and the associated Icicle dev board, which should allow upstream kernels to boot without any additional modifications. - An improved memmove() implementation. - Support for the new Ssconfpmf and SBI PMU extensions, which allows for a much more useful perf implementation on RISC-V systems. - Support for restartable sequences. * tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits) rseq/selftests: Add support for RISC-V RISC-V: Add support for restartable sequence MAINTAINERS: Add entry for RISC-V PMU drivers Documentation: riscv: Remove the old documentation RISC-V: Add sscofpmf extension support RISC-V: Add perf platform driver based on SBI PMU extension RISC-V: Add RISC-V SBI PMU extension definitions RISC-V: Add a simple platform driver for RISC-V legacy perf RISC-V: Add a perf core library for pmu drivers RISC-V: Add CSR encodings for all HPMCOUNTERS RISC-V: Remove the current perf implementation RISC-V: Improve /proc/cpuinfo output for ISA extensions RISC-V: Do no continue isa string parsing without correct XLEN RISC-V: Implement multi-letter ISA extension probing framework RISC-V: Extract multi-letter extension names from "riscv, isa" RISC-V: Minimal parser for "riscv, isa" strings RISC-V: Correctly print supported extensions riscv: Fixed misaligned memory access. Fixed pointer comparison. MAINTAINERS: update riscv/microchip entry riscv: dts: microchip: add new peripherals to icicle kit device tree ...
2022-03-24Merge tag 'iommu-updates-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - IOMMU Core changes: - Removal of aux domain related code as it is basically dead and will be replaced by iommu-fd framework - Split of iommu_ops to carry domain-specific call-backs separatly - Cleanup to remove useless ops->capable implementations - Improve 32-bit free space estimate in iova allocator - Intel VT-d updates: - Various cleanups of the driver - Support for ATS of SoC-integrated devices listed in ACPI/SATC table - ARM SMMU updates: - Fix SMMUv3 soft lockup during continuous stream of events - Fix error path for Qualcomm SMMU probe() - Rework SMMU IRQ setup to prepare the ground for PMU support - Minor cleanups and refactoring - AMD IOMMU driver: - Some minor cleanups and error-handling fixes - Rockchip IOMMU driver: - Use standard driver registration - MSM IOMMU driver: - Minor cleanup and change to standard driver registration - Mediatek IOMMU driver: - Fixes for IOTLB flushing logic * tag 'iommu-updates-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (47 commits) iommu/amd: Improve amd_iommu_v2_exit() iommu/amd: Remove unused struct fault.devid iommu/amd: Clean up function declarations iommu/amd: Call memunmap in error path iommu/arm-smmu: Account for PMU interrupts iommu/vt-d: Enable ATS for the devices in SATC table iommu/vt-d: Remove unused function intel_svm_capable() iommu/vt-d: Add missing "__init" for rmrr_sanity_check() iommu/vt-d: Move intel_iommu_ops to header file iommu/vt-d: Fix indentation of goto labels iommu/vt-d: Remove unnecessary prototypes iommu/vt-d: Remove unnecessary includes iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO iommu/vt-d: Remove domain and devinfo mempool iommu/vt-d: Remove iova_cache_get/put() iommu/vt-d: Remove finding domain in dmar_insert_one_dev_info() iommu/vt-d: Remove intel_iommu::domains iommu/mediatek: Always tlb_flush_all when each PM resume iommu/mediatek: Add tlb_lock in tlb_flush_all iommu/mediatek: Remove the power status checking in tlb flush all ...
2022-03-21RISC-V: Add sscofpmf extension supportAtish Patra
The sscofpmf extension allows counter overflow and filtering for programmable counters. Enable the perf driver to handle the overflow interrupt. The overflow interrupt is a hart local interrupt. Thus, per cpu overflow interrupts are setup as a child under the root INTC irq domain. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-21RISC-V: Add perf platform driver based on SBI PMU extensionAtish Patra
RISC-V SBI specification added a PMU extension that allows to configure start/stop any pmu counter. The RISC-V perf can use most of the generic perf features except interrupt overflow and event filtering based on privilege mode which will be added in future. It also allows to monitor a handful of firmware counters that can provide insights into firmware activity during a performance analysis. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-21RISC-V: Add a simple platform driver for RISC-V legacy perfAtish Patra
The old RISC-V perf implementation allowed counting of only cycle/instruction counters using perf. Restore that feature by implementing a simple platform driver under a separate config to provide backward compatibility. Any existing software stack will continue to work as it is. However, it provides an easy way out in future where we can remove the legacy driver. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-21RISC-V: Add a perf core library for pmu driversAtish Patra
Implement a perf core library that can support all the essential perf features in future. It can also accommodate any type of PMU implementation in future. Currently, both SBI based perf driver and legacy driver implemented uses the library. Most of the common perf functionalities are kept in this core library wile PMU specific driver can implement PMU specific features. For example, the SBI specific functionality will be implemented in the SBI specific driver. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-09perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driverWill Deacon
When compiling the Marvell CN10K DDR PMU driver with CONFIG_OF=n, the build fails: | drivers/perf/marvell_cn10k_ddr_pmu.c:723:35: error: 'cn10k_ddr_pmu_of_match' undeclared here (not in a function); did you mean 'cn10k_ddr_pmu_driver'? Use `of_match_ptr()` to avoid referencing the non-existent match table in this configuration. Link: https://lore.kernel.org/r/202203091424.Vfe8J4W9-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Will Deacon <will@kernel.org>
2022-03-08Merge branch 'for-next/perf-m1' into for-next/perfWill Deacon
Support for the CPU PMUs on the Apple M1. * for-next/perf-m1: drivers/perf: Add Apple icestorm/firestorm CPU PMU driver drivers/perf: arm_pmu: Handle 47 bit counters irqchip/apple-aic: Move PMU-specific registers to their own include file arm64: dts: apple: Add t8303 PMU nodes arm64: dts: apple: Add t8103 PMU interrupt affinities irqchip/apple-aic: Wire PMU interrupts irqchip/apple-aic: Parse FIQ affinities from device-tree dt-bindings: apple,aic: Add affinity description for per-cpu pseudo-interrupts dt-bindings: apple,aic: Add CPU PMU per-cpu pseudo-interrupts dt-bindings: arm-pmu: Document Apple PMU compatible strings
2022-03-08drivers/perf: Add Apple icestorm/firestorm CPU PMU driverMarc Zyngier
Add a new, weird and wonderful driver for the equally weird Apple PMU HW. Although the PMU itself is functional, we don't know much about the events yet, so this can be considered as yet another random number generator... Nonetheless, it can reliably count at least cycles and instructions in the usually wonky big-little way. For anything else, it of course supports raw event numbers. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2022-03-08drivers/perf: arm_pmu: Handle 47 bit countersMarc Zyngier
The current ARM PMU framework can only deal with 32 or 64bit counters. Teach it about a 47bit flavour. Yes, this is odd. Reviewed-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-02 23:57:08 +0000