summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx/405gp_enet.c
blob: 9639c92e90c225e55f35ebb6e2edef7c2f498342 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
/*-----------------------------------------------------------------------------+
 *
 *       This source code has been made available to you by IBM on an AS-IS
 *       basis.  Anyone receiving this source is licensed under IBM
 *       copyrights to use it in any way he or she deems fit, including
 *       copying it, modifying it, compiling it, and redistributing it either
 *       with or without modifications.  No license under IBM patents or
 *       patent applications is to be implied by the copyright license.
 *
 *       Any user of this software should understand that IBM cannot provide
 *       technical support for this software and will not be responsible for
 *       any consequences resulting from the use of this software.
 *
 *       Any person who transfers this source code or any derivative work
 *       must include the IBM copyright notice, this paragraph, and the
 *       preceding two paragraphs in the transferred software.
 *
 *       COPYRIGHT   I B M   CORPORATION 1995
 *       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
 *-----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------+
 *
 *  File Name:  enetemac.c
 *
 *  Function:   Device driver for the ethernet EMAC3 macro on the 405GP.
 *
 *  Author:     Mark Wisner
 *
 *  Change Activity-
 *
 *  Date        Description of Change                                       BY
 *  ---------   ---------------------                                       ---
 *  05-May-99   Created                                                     MKW
 *  27-Jun-99   Clean up                                                    JWB
 *  16-Jul-99   Added MAL error recovery and better IP packet handling      MKW
 *  29-Jul-99   Added Full duplex support                                   MKW
 *  06-Aug-99   Changed names for Mal CR reg                                MKW
 *  23-Aug-99   Turned off SYE when running at 10Mbs                        MKW
 *  24-Aug-99   Marked descriptor empty after call_xlc                      MKW
 *  07-Sep-99   Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16     MCG
 *              to avoid chaining maximum sized packets. Push starting
 *              RX descriptor address up to the next cache line boundary.
 *  16-Jan-00   Added support for booting with IP of 0x0                    MKW
 *  15-Mar-00   Updated enetInit() to enable broadcast addresses in the
 *	        EMAC_RXM register.                                          JWB
 *  12-Mar-01   anne-sophie.harnois@nextream.fr
 *               - Variables are compatible with those already defined in
 *                include/net.h
 *              - Receive buffer descriptor ring is used to send buffers
 *                to the user
 *              - Info print about send/received/handled packet number if
 *                INFO_405_ENET is set
 *  17-Apr-01   stefan.roese@esd-electronics.com
 *              - MAL reset in "eth_halt" included
 *              - Enet speed and duplex output now in one line
 *  08-May-01   stefan.roese@esd-electronics.com
 *              - MAL error handling added (eth_init called again)
 *  13-Nov-01   stefan.roese@esd-electronics.com
 *              - Set IST bit in EMAC_M1 reg upon 100MBit or full duplex
 *  04-Jan-02   stefan.roese@esd-electronics.com
 *              - Wait for PHY auto negotiation to complete added
 *  06-Feb-02   stefan.roese@esd-electronics.com
 *              - Bug fixed in waiting for auto negotiation to complete
 *  26-Feb-02   stefan.roese@esd-electronics.com
 *              - rx and tx buffer descriptors now allocated (no fixed address
 *                used anymore)
 *  17-Jun-02   stefan.roese@esd-electronics.com
 *              - MAL error debug printf 'M' removed (rx de interrupt may
 *                occur upon many incoming packets with only 4 rx buffers).
 *-----------------------------------------------------------------------------*/

#include <common.h>
#include <asm/processor.h>
#include <ppc4xx.h>
#include <commproc.h>
#include <405gp_enet.h>
#include <405_mal.h>
#include <miiphy.h>
#include <net.h>
#include <malloc.h>
#include "vecnum.h"

#if defined(CONFIG_405GP) || defined(CONFIG_440) || defined(CONFIG_405EP)

#define EMAC_RESET_TIMEOUT 1000	/* 1000 ms reset timeout */
#define PHY_AUTONEGOTIATE_TIMEOUT 2000	/* 2000 ms autonegotiate timeout */

#define NUM_TX_BUFF 1
/* AS.HARNOIS
 * Use PKTBUFSRX (include/net.h) instead of setting NUM_RX_BUFF again
 * These both variables are used to define the same thing!
 * #define NUM_RX_BUFF 4
 */
#define NUM_RX_BUFF PKTBUFSRX

/* Ethernet Transmit and Receive Buffers */
/* AS.HARNOIS
 * In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from
 * PKTSIZE and PKTSIZE_ALIGN (include/net.h)
 */
#define ENET_MAX_MTU           PKTSIZE
#define ENET_MAX_MTU_ALIGNED   PKTSIZE_ALIGN

static char *txbuf_ptr;

/* define the number of channels implemented */
#define EMAC_RXCHL      1
#define EMAC_TXCHL      1

/*-----------------------------------------------------------------------------+
 * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal
 * Interrupt Controller).
 *-----------------------------------------------------------------------------*/
#define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE  | UIC_MAL_RXDE)
#define MAL_UIC_DEF  (UIC_MAL_RXEOB | MAL_UIC_ERR)
#define EMAC_UIC_DEF UIC_ENET

/*-----------------------------------------------------------------------------+
 * Global variables. TX and RX descriptors and buffers.
 *-----------------------------------------------------------------------------*/
static volatile mal_desc_t *tx;
static volatile mal_desc_t *rx;
static mal_desc_t *alloc_tx_buf = NULL;
static mal_desc_t *alloc_rx_buf = NULL;

/* IER globals */
static unsigned long emac_ier;
static unsigned long mal_ier;


/* Statistic Areas */
#define MAX_ERR_LOG 10
struct emac_stats {
	int data_len_err;
	int rx_frames;
	int rx;
	int rx_prot_err;
};

static struct stats {			/* Statistic Block */
	struct emac_stats emac;
	int int_err;
	short tx_err_log[MAX_ERR_LOG];
	short rx_err_log[MAX_ERR_LOG];
} stats;

static int first_init = 0;

static int tx_err_index = 0;	/* Transmit Error Index for tx_err_log */
static int rx_err_index = 0;	/* Receive Error Index for rx_err_log */

static int rx_slot = 0;			/* MAL Receive Slot */
static int rx_i_index = 0;		/* Receive Interrupt Queue Index */
static int rx_u_index = 0;		/* Receive User Queue Index */
static int rx_ready[NUM_RX_BUFF];	/* Receive Ready Queue */

static int tx_slot = 0;			/* MAL Transmit Slot */
static int tx_i_index = 0;		/* Transmit Interrupt Queue Index */
static int tx_u_index = 0;		/* Transmit User Queue Index */
static int tx_run[NUM_TX_BUFF];	/* Transmit Running Queue */

#undef INFO_405_ENET 1
#ifdef INFO_405_ENET
static int packetSent = 0;
static int packetReceived = 0;
static int packetHandled = 0;
#endif

static char emac_hwd_addr[ENET_ADDR_LENGTH];

static bd_t *bis_save = NULL;	/* for eth_init upon mal error */

static int is_receiving = 0;	/* sync with eth interrupt */
static int print_speed = 1;	/* print speed message upon start */

/*-----------------------------------------------------------------------------+
 * Prototypes and externals.
 *-----------------------------------------------------------------------------*/
static void enet_rcv (unsigned long malisr);
static int  enetInt(void);
static void mal_err (unsigned long isr, unsigned long uic, unsigned long mal_def,
	      unsigned long mal_errr);
static void emac_err (unsigned long isr);

static void ppc_4xx_eth_halt (struct eth_device *dev)
{
	mtdcr (malier, 0x00000000);	/* disable mal interrupts */
	out32 (EMAC_IER, 0x00000000);	/* disable emac interrupts */

	/* 1st reset MAL */
	mtdcr (malmcr, MAL_CR_MMSR);

	/* wait for reset */
	while (mfdcr (malmcr) & MAL_CR_MMSR) {
	};

	/* EMAC RESET */
	out32 (EMAC_M0, EMAC_M0_SRST);

	print_speed = 1;		/* print speed message again next time */
}


static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
{
	int i;
	unsigned long reg;
	unsigned long msr;
	unsigned long speed;
	unsigned long duplex;
	unsigned mode_reg;
	unsigned short reg_short;

	msr = mfmsr ();
	mtmsr (msr & ~(MSR_EE));	/* disable interrupts */

#ifdef INFO_405_ENET
	/* AS.HARNOIS
	 * We should have :
	 * packetHandled <=  packetReceived <= packetHandled+PKTBUFSRX
	 * In the most cases packetHandled = packetReceived, but it
	 * is possible that new packets (without relationship with
	 * current transfer) have got the time to arrived before
	 * netloop calls eth_halt
	 */
	printf ("About preceeding transfer:\n"
		"- Sent packet number %d\n"
		"- Received packet number %d\n"
		"- Handled packet number %d\n",
		packetSent, packetReceived, packetHandled);
	packetSent = 0;
	packetReceived = 0;
	packetHandled = 0;
#endif

	/* MAL RESET */
	mtdcr (malmcr, MAL_CR_MMSR);
	/* wait for reset */
	while (mfdcr (malmcr) & MAL_CR_MMSR) {
	};

	tx_err_index = 0;		/* Transmit Error Index for tx_err_log */
	rx_err_index = 0;		/* Receive Error Index for rx_err_log */

	rx_slot = 0;			/* MAL Receive Slot */
	rx_i_index = 0;			/* Receive Interrupt Queue Index */
	rx_u_index = 0;			/* Receive User Queue Index */

	tx_slot = 0;			/* MAL Transmit Slot */
	tx_i_index = 0;			/* Transmit Interrupt Queue Index */
	tx_u_index = 0;			/* Transmit User Queue Index */

#if defined(CONFIG_440)
	/* set RMII mode */
	out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0);
#endif /* CONFIG_440 */

	/* EMAC RESET */
	out32 (EMAC_M0, EMAC_M0_SRST);

	/* wait for PHY to complete auto negotiation */
	reg_short = 0;
#ifndef CONFIG_CS8952_PHY
	miiphy_read (CONFIG_PHY_ADDR, PHY_BMSR, &reg_short);

	/*
	 * Wait if PHY is able of autonegotiation and autonegotiation is not complete
	 */
	if ((reg_short & PHY_BMSR_AUTN_ABLE)
	    && !(reg_short & PHY_BMSR_AUTN_COMP)) {
		puts ("Waiting for PHY auto negotiation to complete");
		i = 0;
		while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
			if ((i++ % 100) == 0)
				putc ('.');
			udelay (10000);		/* 10 ms */
			miiphy_read (CONFIG_PHY_ADDR, PHY_BMSR, &reg_short);

			/*
			 * Timeout reached ?
			 */
			if (i * 10 > PHY_AUTONEGOTIATE_TIMEOUT) {
				puts (" TIMEOUT !\n");
				break;
			}
		}
		puts (" done\n");
		udelay (500000);	/* another 500 ms (results in faster booting) */
	}
#endif
	speed = miiphy_speed (CONFIG_PHY_ADDR);
	duplex = miiphy_duplex (CONFIG_PHY_ADDR);
	if (print_speed) {
		print_speed = 0;
		printf ("ENET Speed is %d Mbps - %s duplex connection\n",
			(int) speed, (duplex == HALF) ? "HALF" : "FULL");
	}

	/* set the Mal configuration reg */
#if defined(CONFIG_440)
	/* Errata 1.12: MAL_1 -- Disable MAL bursting */
	if( get_pvr() == PVR_440GP_RB )
	    mtdcr (malmcr, MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
	else
#else
	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
#endif

	/* Free "old" buffers */
	if (alloc_tx_buf) free(alloc_tx_buf);
	if (alloc_rx_buf) free(alloc_rx_buf);

	/*
	 * Malloc MAL buffer desciptors, make sure they are
	 * aligned on cache line boundary size
	 * (401/403/IOP480 = 16, 405 = 32)
	 * and doesn't cross cache block boundaries.
	 */
	alloc_tx_buf = (mal_desc_t *)malloc((sizeof(mal_desc_t) * NUM_TX_BUFF) +
					    ((2 * CFG_CACHELINE_SIZE) - 2));
	if (((int)alloc_tx_buf & CACHELINE_MASK) != 0) {
		tx = (mal_desc_t *)((int)alloc_tx_buf + CFG_CACHELINE_SIZE -
				    ((int)alloc_tx_buf & CACHELINE_MASK));
	} else {
		tx = alloc_tx_buf;
	}

	alloc_rx_buf = (mal_desc_t *)malloc((sizeof(mal_desc_t) * NUM_RX_BUFF) +
					    ((2 * CFG_CACHELINE_SIZE) - 2));
	if (((int)alloc_rx_buf & CACHELINE_MASK) != 0) {
		rx = (mal_desc_t *)((int)alloc_rx_buf + CFG_CACHELINE_SIZE -
				    ((int)alloc_rx_buf & CACHELINE_MASK));
	} else {
		rx = alloc_rx_buf;
	}

	for (i = 0; i < NUM_TX_BUFF; i++) {
		tx[i].ctrl = 0;
		tx[i].data_len = 0;
		if (first_init == 0)
			txbuf_ptr = (char *) malloc (ENET_MAX_MTU_ALIGNED);
		tx[i].data_ptr = txbuf_ptr;
		if ((NUM_TX_BUFF - 1) == i)
			tx[i].ctrl |= MAL_TX_CTRL_WRAP;
		tx_run[i] = -1;
#if 0
		printf ("TX_BUFF %d @ 0x%08lx\n", i, (ulong) tx[i].data_ptr);
#endif
	}

	for (i = 0; i < NUM_RX_BUFF; i++) {
		rx[i].ctrl = 0;
		rx[i].data_len = 0;
		/*       rx[i].data_ptr = (char *) &rx_buff[i]; */
		rx[i].data_ptr = (char *) NetRxPackets[i];
		if ((NUM_RX_BUFF - 1) == i)
			rx[i].ctrl |= MAL_RX_CTRL_WRAP;
		rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR;
		rx_ready[i] = -1;
#if 0
		printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr);
#endif
	}

	memcpy (emac_hwd_addr, bis->bi_enetaddr, ENET_ADDR_LENGTH);

	reg = 0x00000000;

	reg |= emac_hwd_addr[0];	/* set high address */
	reg = reg << 8;
	reg |= emac_hwd_addr[1];

	out32 (EMAC_IAH, reg);

	reg = 0x00000000;
	reg |= emac_hwd_addr[2];	/* set low address  */
	reg = reg << 8;
	reg |= emac_hwd_addr[3];
	reg = reg << 8;
	reg |= emac_hwd_addr[4];
	reg = reg << 8;
	reg |= emac_hwd_addr[5];

	out32 (EMAC_IAL, reg);

	/* setup MAL tx & rx channel pointers */
	mtdcr (maltxctp0r, tx);
	mtdcr (malrxctp0r, rx);

	/* Reset transmit and receive channels */
	mtdcr (malrxcarr, 0x80000000);	/* 2 channels */
	mtdcr (maltxcarr, 0x80000000);	/* 2 channels */

	/* Enable MAL transmit and receive channels */
	mtdcr (maltxcasr, 0x80000000);	/* 1 channel */
	mtdcr (malrxcasr, 0x80000000);	/* 1 channel */

	/* set RX buffer size */
	mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16);

	/* set transmit enable & receive enable */
	out32 (EMAC_M0, EMAC_M0_TXE | EMAC_M0_RXE);

	/* set receive fifo to 4k and tx fifo to 2k */
	mode_reg = EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K;

	/* set speed */
	if (speed == _100BASET)
		mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST;
	else
		mode_reg = mode_reg & ~0x00C00000;	/* 10 MBPS */
	if (duplex == FULL)
		mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST;

	out32 (EMAC_M1, mode_reg);

	/* Enable broadcast and indvidual address */
	out32 (EMAC_RXM, EMAC_RMR_BAE | EMAC_RMR_IAE
	       /*| EMAC_RMR_ARRP| EMAC_RMR_SFCS | EMAC_RMR_SP */ );

	/* we probably need to set the tx mode1 reg? maybe at tx time */

	/* set transmit request threshold register */
	out32 (EMAC_TRTR, 0x18000000);	/* 256 byte threshold */

	/* set receive  low/high water mark register */
#if defined(CONFIG_440)
	/* 440GP has a 64 byte burst length */
	out32 (EMAC_RX_HI_LO_WMARK, 0x80009000);
	out32 (EMAC_TXM1,           0xf8640000);
#else /* CONFIG_440 */
	/* 405s have a 16 byte burst length */
	out32 (EMAC_RX_HI_LO_WMARK, 0x0f002000);
#endif /* CONFIG_440 */

	/* Frame gap set */
	out32 (EMAC_I_FRAME_GAP_REG, 0x00000008);

	if (first_init == 0) {
		/*
		 * Connect interrupt service routines
		 */
		irq_install_handler (VECNUM_EWU0, (interrupt_handler_t *) enetInt, NULL);
		irq_install_handler (VECNUM_MS, (interrupt_handler_t *) enetInt, NULL);
		irq_install_handler (VECNUM_MTE, (interrupt_handler_t *) enetInt, NULL);
		irq_install_handler (VECNUM_MRE, (interrupt_handler_t *) enetInt, NULL);
		irq_install_handler (VECNUM_TXDE, (interrupt_handler_t *) enetInt, NULL);
		irq_install_handler (VECNUM_RXDE, (interrupt_handler_t *) enetInt, NULL);
		irq_install_handler (VECNUM_ETH0, (interrupt_handler_t *) enetInt, NULL);
	}

	/* set up interrupt handler */
	/* setup interrupt controler to take interrupts from the MAL &
	   EMAC */
	mtdcr (uicsr, 0xffffffff);	/* clear pending interrupts */
	mtdcr (uicer, mfdcr (uicer) | MAL_UIC_DEF | EMAC_UIC_DEF);

	/* set the MAL IER ??? names may change with new spec ??? */
	mal_ier = MAL_IER_DE | MAL_IER_NE | MAL_IER_TE | MAL_IER_OPBE |
		MAL_IER_PLBE;
	mtdcr (malesr, 0xffffffff);	/* clear pending interrupts */
	mtdcr (maltxdeir, 0xffffffff);	/* clear pending interrupts */
	mtdcr (malrxdeir, 0xffffffff);	/* clear pending interrupts */
	mtdcr (malier, mal_ier);

	/* Set EMAC IER */
	emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS |
		EMAC_ISR_PTLE | EMAC_ISR_ORE  | EMAC_ISR_IRE;
	if (speed == _100BASET)
		emac_ier = emac_ier | EMAC_ISR_SYE;

	out32 (EMAC_ISR, 0xffffffff);	/* clear pending interrupts */
	out32 (EMAC_IER, emac_ier);

	mtmsr (msr);				/* enable interrupts again */

	bis_save = bis;
	first_init = 1;

	return (1);
}


static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, int len)
{
	struct enet_frame *ef_ptr;
	ulong time_start, time_now;
	unsigned long temp_txm0;

	ef_ptr = (struct enet_frame *) ptr;

	/*-----------------------------------------------------------------------+
	 *  Copy in our address into the frame.
	 *-----------------------------------------------------------------------*/
	(void) memcpy (ef_ptr->source_addr, emac_hwd_addr, ENET_ADDR_LENGTH);

	/*-----------------------------------------------------------------------+
	 * If frame is too long or too short, modify length.
	 *-----------------------------------------------------------------------*/
	if (len > ENET_MAX_MTU)
		len = ENET_MAX_MTU;

	/*   memcpy ((void *) &tx_buff[tx_slot], (const void *) ptr, len); */
	memcpy ((void *) txbuf_ptr, (const void *) ptr, len);

	/*-----------------------------------------------------------------------+
	 * set TX Buffer busy, and send it
	 *-----------------------------------------------------------------------*/
	tx[tx_slot].ctrl = (MAL_TX_CTRL_LAST |
			    EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP) &
		~(EMAC_TX_CTRL_ISA | EMAC_TX_CTRL_RSA);
	if ((NUM_TX_BUFF - 1) == tx_slot)
		tx[tx_slot].ctrl |= MAL_TX_CTRL_WRAP;

	tx[tx_slot].data_len = (short) len;
	tx[tx_slot].ctrl |= MAL_TX_CTRL_READY;

    __asm__ volatile ("eieio");
	out32 (EMAC_TXM0, in32 (EMAC_TXM0) | EMAC_TXM0_GNP0);
#ifdef INFO_405_ENET
	packetSent++;
#endif

	/*-----------------------------------------------------------------------+
	 * poll unitl the packet is sent and then make sure it is OK
	 *-----------------------------------------------------------------------*/
	time_start = get_timer (0);
	while (1) {
		temp_txm0 = in32 (EMAC_TXM0);
		/* loop until either TINT turns on or 3 seconds elapse */
		if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) {
			/* transmit is done, so now check for errors
			 * If there is an error, an interrupt should
			 * happen when we return
			 */
			time_now = get_timer (0);
			if ((time_now - time_start) > 3000) {
				return (-1);
			}
		} else {
			return (len);
		}
	}
}


#if defined(CONFIG_440)
/*-----------------------------------------------------------------------------+
| EnetInt.
| EnetInt is the interrupt handler.  It will determine the
| cause of the interrupt and call the apporpriate servive
| routine.
+-----------------------------------------------------------------------------*/
int enetInt ()
{
	int serviced;
	int rc = -1;				/* default to not us */
	unsigned long mal_isr;
	unsigned long emac_isr = 0;
	unsigned long mal_rx_eob;
	unsigned long my_uic0msr, my_uic1msr;

	/* enter loop that stays in interrupt code until nothing to service */
	do {
		serviced = 0;

		my_uic0msr = mfdcr (uic0msr);
		my_uic1msr = mfdcr (uic1msr);

		if (!(my_uic0msr & UIC_MRE)
		    && !(my_uic1msr & (UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE))) {
			/* not for us */
			return (rc);
		}

		/* get and clear controller status interrupts */
		/* look at Mal and EMAC interrupts */
		if ((my_uic0msr & UIC_MRE)
		    || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
			/* we have a MAL interrupt */
			mal_isr = mfdcr (malesr);
			/* look for mal error */
			if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
				mal_err (mal_isr, my_uic0msr, MAL_UIC_DEF, MAL_UIC_ERR);
				serviced = 1;
				rc = 0;
			}
		}
		if (UIC_ETH0 & my_uic1msr) {	/* look for EMAC errors */
			emac_isr = in32 (EMAC_ISR);
			if ((emac_ier & emac_isr) != 0) {
				emac_err (emac_isr);
				serviced = 1;
				rc = 0;
			}
		}
		if ((emac_ier & emac_isr)
		    || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
			mtdcr (uic0sr, UIC_MRE); /* Clear */
			mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
			return (rc);		/* we had errors so get out */
		}

		/* handle MAL RX EOB  interupt from a receive */
		/* check for EOB on valid channels            */
		if (my_uic0msr & UIC_MRE) {
			mal_rx_eob = mfdcr (malrxeobisr);
			if ((mal_rx_eob & 0x80000000) != 0) {	/* call emac routine for channel 0 */
				/* clear EOB
				   mtdcr(malrxeobisr, mal_rx_eob); */
				enet_rcv (emac_isr);
				/* indicate that we serviced an interrupt */
				serviced = 1;
				rc = 0;
			}
		}
		mtdcr (uic0sr, UIC_MRE); /* Clear */
		mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
	} while (serviced);

	return (rc);
}
#else /* CONFIG_440 */
/*-----------------------------------------------------------------------------+
 * EnetInt.
 * EnetInt is the interrupt handler.  It will determine the
 * cause of the interrupt and call the apporpriate servive
 * routine.
 *-----------------------------------------------------------------------------*/
int enetInt ()
{
	int serviced;
	int rc = -1;				/* default to not us */
	unsigned long mal_isr;
	unsigned long emac_isr = 0;
	unsigned long mal_rx_eob;
	unsigned long my_uicmsr;

	/* enter loop that stays in interrupt code until nothing to service */
	do {
		serviced = 0;

		my_uicmsr = mfdcr (uicmsr);
		if ((my_uicmsr & (MAL_UIC_DEF | EMAC_UIC_DEF)) == 0) {	/* not for us */
			return (rc);
		}


		/* get and clear controller status interrupts */
		/* look at Mal and EMAC interrupts */
		if ((MAL_UIC_DEF & my_uicmsr) != 0) {	/* we have a MAL interrupt */
			mal_isr = mfdcr (malesr);
			/* look for mal error */
			if ((my_uicmsr & MAL_UIC_ERR) != 0) {
				mal_err (mal_isr, my_uicmsr, MAL_UIC_DEF, MAL_UIC_ERR);
				serviced = 1;
				rc = 0;
			}
		}
		if ((EMAC_UIC_DEF & my_uicmsr) != 0) {	/* look for EMAC errors */
			emac_isr = in32 (EMAC_ISR);
			if ((emac_ier & emac_isr) != 0) {
				emac_err (emac_isr);
				serviced = 1;
				rc = 0;
			}
		}
		if (((emac_ier & emac_isr) != 0) | ((MAL_UIC_ERR & my_uicmsr) != 0)) {
			mtdcr (uicsr, MAL_UIC_DEF | EMAC_UIC_DEF); /* Clear */
			return (rc);		/* we had errors so get out */
		}


		/* handle MAL RX EOB  interupt from a receive */
		/* check for EOB on valid channels            */
		if ((my_uicmsr & UIC_MAL_RXEOB) != 0) {
			mal_rx_eob = mfdcr (malrxeobisr);
			if ((mal_rx_eob & 0x80000000) != 0) {	/* call emac routine for channel 0 */
				/* clear EOB
				   mtdcr(malrxeobisr, mal_rx_eob); */
				enet_rcv (emac_isr);
				/* indicate that we serviced an interrupt */
				serviced = 1;
				rc = 0;
			}
		}
		mtdcr (uicsr, MAL_UIC_DEF | EMAC_UIC_DEF);	/* Clear */
	}
	while (serviced);

	return (rc);
}
#endif /* CONFIG_440 */

/*-----------------------------------------------------------------------------+
 *  MAL Error Routine
 *-----------------------------------------------------------------------------*/
static void mal_err (unsigned long isr, unsigned long uic, unsigned long maldef,
	      unsigned long mal_errr)
{
	mtdcr (malesr, isr);		/* clear interrupt */

	/* clear DE interrupt */
	mtdcr (maltxdeir, 0xC0000000);
	mtdcr (malrxdeir, 0x80000000);

#ifdef INFO_405_ENET
	printf ("\nMAL error occured.... ISR = %lx UIC = = %lx  MAL_DEF = %lx  MAL_ERR= %lx \n",
		isr, uic, maldef, mal_errr);
#else
#if 0
	/*
	 * MAL error is RX DE error (out of rx buffers)! This is OK here, upon
	 * many incoming packets with only 4 rx buffers.
	 */
	printf ("M");			/* just to see something upon mal error */
#endif
#endif

	eth_init (bis_save);		/* start again... */
}

/*-----------------------------------------------------------------------------+
 *  EMAC Error Routine
 *-----------------------------------------------------------------------------*/
static void emac_err (unsigned long isr)
{
	printf ("EMAC error occured.... ISR = %lx\n", isr);
	out32 (EMAC_ISR, isr);
}

/*-----------------------------------------------------------------------------+
 *  enet_rcv() handles the ethernet receive data
 *-----------------------------------------------------------------------------*/
static void enet_rcv (unsigned long malisr)
{
	struct enet_frame *ef_ptr;
	unsigned long data_len;
	unsigned long rx_eob_isr;

	int handled = 0;
	int i;
	int loop_count = 0;

	rx_eob_isr = mfdcr (malrxeobisr);
	if ((0x80000000 >> (EMAC_RXCHL - 1)) & rx_eob_isr) {
		/* clear EOB */
		mtdcr (malrxeobisr, rx_eob_isr);

		/* EMAC RX done */
		while (1) {				/* do all */
			i = rx_slot;

			if ((MAL_RX_CTRL_EMPTY & rx[i].ctrl)
			    || (loop_count >= NUM_RX_BUFF))
				break;
			loop_count++;
			rx_slot++;
			if (NUM_RX_BUFF == rx_slot)
				rx_slot = 0;
			handled++;
			data_len = (unsigned long) rx[i].data_len;	/* Get len */
			if (data_len) {
				if (data_len > ENET_MAX_MTU)	/* Check len */
					data_len = 0;
				else {
					if (EMAC_RX_ERRORS & rx[i].ctrl) {	/* Check Errors */
						data_len = 0;
						stats.rx_err_log[rx_err_index] = rx[i].ctrl;
						rx_err_index++;
						if (rx_err_index == MAX_ERR_LOG)
							rx_err_index = 0;
					}	/* emac_erros         */
				}		/* data_len < max mtu */
			}			/* if data_len        */
			if (!data_len) {	/* no data */
				rx[i].ctrl |= MAL_RX_CTRL_EMPTY;	/* Free Recv Buffer */

				stats.emac.data_len_err++;	/* Error at Rx */
			}

			/* !data_len */
			/* AS.HARNOIS */
			/* Check if user has already eaten buffer */
			/* if not => ERROR */
			else if (rx_ready[rx_i_index] != -1) {
				if (is_receiving)
					printf ("ERROR : Receive buffers are full!\n");
				break;
			} else {
				stats.emac.rx_frames++;
				stats.emac.rx += data_len;
				ef_ptr = (struct enet_frame *) rx[i].data_ptr;
#ifdef INFO_405_ENET
				packetReceived++;
#endif
				/* AS.HARNOIS
				 * use ring buffer
				 */
				rx_ready[rx_i_index] = i;
				rx_i_index++;
				if (NUM_RX_BUFF == rx_i_index)
					rx_i_index = 0;

				/* printf("X");  /|* test-only *|/ */

				/*  AS.HARNOIS
				 * free receive buffer only when
				 * buffer has been handled (eth_rx)
				 rx[i].ctrl |= MAL_RX_CTRL_EMPTY;
				*/
			}			/* if data_len */
		}				/* while */
	}					/* if EMACK_RXCHL */
}


static int ppc_4xx_eth_rx (struct eth_device *dev)
{
	int length;
	int user_index;
	unsigned long msr;

	is_receiving = 1;			/* tell driver */

	for (;;) {
		/* AS.HARNOIS
		 * use ring buffer and
		 * get index from rx buffer desciptor queue
		 */
		user_index = rx_ready[rx_u_index];
		if (user_index == -1) {
			length = -1;
			break;	/* nothing received - leave for() loop */
		}

		msr = mfmsr ();
		mtmsr (msr & ~(MSR_EE));

		length = rx[user_index].data_len;

		/* Pass the packet up to the protocol layers. */
		/*       NetReceive(NetRxPackets[rxIdx], length - 4); */
		/*       NetReceive(NetRxPackets[i], length); */
		NetReceive (NetRxPackets[user_index], length - 4);
		/* Free Recv Buffer */
		rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY;
		/* Free rx buffer descriptor queue */
		rx_ready[rx_u_index] = -1;
		rx_u_index++;
		if (NUM_RX_BUFF == rx_u_index)
			rx_u_index = 0;

#ifdef INFO_405_ENET
		packetHandled++;
#endif

		mtmsr (msr);			/* Enable IRQ's */
	}

	is_receiving = 0;			/* tell driver */

	return length;
}

#if defined(CONFIG_NET_MULTI)
int ppc_4xx_eth_initialize(bd_t *bis)
{
	struct eth_device *dev;
	int                eth_num = 0;

	dev = malloc (sizeof *dev);
	if (dev == NULL) {
		printf(__FUNCTION__ ": Cannot allocate eth_device\n");
		return (-1);
	}

	sprintf(dev->name, "ppc_4xx_eth%d", eth_num);
	dev->priv = (void *) eth_num;
	dev->init = ppc_4xx_eth_init;
	dev->halt = ppc_4xx_eth_halt;
	dev->send = ppc_4xx_eth_send;
	dev->recv = ppc_4xx_eth_rx;

	eth_register (dev);
}
#else /* !defined(CONFIG_NET_MULTI) */
void eth_halt (void)
{
	ppc_4xx_eth_halt(NULL);
}

int eth_init (bd_t *bis)
{
	return (ppc_4xx_eth_init(NULL, bis));
}
int eth_send(volatile void *packet, int length)
{
	return (ppc_4xx_eth_send(NULL, packet, length));
}

int eth_rx(void)
{
	return (ppc_4xx_eth_rx(NULL));
}
#endif /* !defined(CONFIG_NET_MULTI) */

#endif	/* CONFIG_405GP */