diff options
Diffstat (limited to 'drivers/usb/host/dwc3-sti-glue.c')
| -rw-r--r-- | drivers/usb/host/dwc3-sti-glue.c | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/drivers/usb/host/dwc3-sti-glue.c b/drivers/usb/host/dwc3-sti-glue.c new file mode 100644 index 0000000000..02ad3115df --- /dev/null +++ b/drivers/usb/host/dwc3-sti-glue.c @@ -0,0 +1,257 @@ +/* + * STiH407 family DWC3 specific Glue layer + * + * Copyright (c) 2017 + * Patrice Chotard <patrice.chotard@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <dm/lists.h> +#include <regmap.h> +#include <reset-uclass.h> +#include <syscon.h> +#include <usb.h> + +#include <linux/usb/dwc3.h> +#include <linux/usb/otg.h> +#include <dwc3-sti-glue.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * struct sti_dwc3_glue_platdata - dwc3 STi glue driver private structure + * @syscfg_base: addr for the glue syscfg + * @glue_base: addr for the glue registers + * @syscfg_offset: usb syscfg control offset + * @powerdown_ctl: rest controller for powerdown signal + * @softreset_ctl: reset controller for softreset signal + * @mode: drd static host/device config + */ +struct sti_dwc3_glue_platdata { + phys_addr_t syscfg_base; + phys_addr_t glue_base; + phys_addr_t syscfg_offset; + struct reset_ctl powerdown_ctl; + struct reset_ctl softreset_ctl; + enum usb_dr_mode mode; +}; + +static int sti_dwc3_glue_drd_init(struct sti_dwc3_glue_platdata *plat) +{ + unsigned long val; + + val = readl(plat->syscfg_base + plat->syscfg_offset); + + val &= USB3_CONTROL_MASK; + + switch (plat->mode) { + case USB_DR_MODE_PERIPHERAL: + val &= ~(USB3_DELAY_VBUSVALID + | USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3) + | USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2 + | USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2); + + val |= USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID; + break; + + case USB_DR_MODE_HOST: + val &= ~(USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID + | USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3) + | USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2 + | USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2); + + val |= USB3_DELAY_VBUSVALID; + break; + + default: + error("Unsupported mode of operation %d\n", plat->mode); + return -EINVAL; + } + writel(val, plat->syscfg_base + plat->syscfg_offset); + + return 0; +} + +static void sti_dwc3_glue_init(struct sti_dwc3_glue_platdata *plat) +{ + unsigned long reg; + + reg = readl(plat->glue_base + CLKRST_CTRL); + + reg |= AUX_CLK_EN | EXT_CFG_RESET_N | XHCI_REVISION; + reg &= ~SW_PIPEW_RESET_N; + + writel(reg, plat->glue_base + CLKRST_CTRL); + + /* configure mux for vbus, powerpresent and bvalid signals */ + reg = readl(plat->glue_base + USB2_VBUS_MNGMNT_SEL1); + + reg |= SEL_OVERRIDE_VBUSVALID(USB2_VBUS_UTMIOTG) | + SEL_OVERRIDE_POWERPRESENT(USB2_VBUS_UTMIOTG) | + SEL_OVERRIDE_BVALID(USB2_VBUS_UTMIOTG); + + writel(reg, plat->glue_base + USB2_VBUS_MNGMNT_SEL1); + + setbits_le32(plat->glue_base + CLKRST_CTRL, SW_PIPEW_RESET_N); +} + +static int sti_dwc3_glue_ofdata_to_platdata(struct udevice *dev) +{ + struct sti_dwc3_glue_platdata *plat = dev_get_platdata(dev); + struct udevice *syscon; + struct regmap *regmap; + int ret; + u32 reg[4]; + + ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), + "reg", reg, ARRAY_SIZE(reg)); + if (ret) { + error("unable to find st,stih407-dwc3 reg property(%d)\n", ret); + return ret; + } + + plat->glue_base = reg[0]; + plat->syscfg_offset = reg[2]; + + /* get corresponding syscon phandle */ + ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "st,syscfg", + &syscon); + if (ret) { + error("unable to find syscon device (%d)\n", ret); + return ret; + } + + /* get syscfg-reg base address */ + regmap = syscon_get_regmap(syscon); + if (!regmap) { + error("unable to find regmap\n"); + return -ENODEV; + } + plat->syscfg_base = regmap->base; + + /* get powerdown reset */ + ret = reset_get_by_name(dev, "powerdown", &plat->powerdown_ctl); + if (ret) { + error("can't get powerdown reset for %s (%d)", dev->name, ret); + return ret; + } + + /* get softreset reset */ + ret = reset_get_by_name(dev, "softreset", &plat->softreset_ctl); + if (ret) + error("can't get soft reset for %s (%d)", dev->name, ret); + + return ret; +}; + +static int sti_dwc3_glue_bind(struct udevice *dev) +{ + struct sti_dwc3_glue_platdata *plat = dev_get_platdata(dev); + int dwc3_node; + + /* check if one subnode is present */ + dwc3_node = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev)); + if (dwc3_node <= 0) { + error("Can't find subnode for %s\n", dev->name); + return -ENODEV; + } + + /* check if the subnode compatible string is the dwc3 one*/ + if (fdt_node_check_compatible(gd->fdt_blob, dwc3_node, + "snps,dwc3") != 0) { + error("Can't find dwc3 subnode for %s\n", dev->name); + return -ENODEV; + } + + /* retrieve the DWC3 dual role mode */ + plat->mode = usb_get_dr_mode(dwc3_node); + if (plat->mode == USB_DR_MODE_UNKNOWN) + /* by default set dual role mode to HOST */ + plat->mode = USB_DR_MODE_HOST; + + return dm_scan_fdt_dev(dev); +} + +static int sti_dwc3_glue_probe(struct udevice *dev) +{ + struct sti_dwc3_glue_platdata *plat = dev_get_platdata(dev); + int ret; + + /* deassert both powerdown and softreset */ + ret = reset_deassert(&plat->powerdown_ctl); + if (ret < 0) { + error("DWC3 powerdown reset deassert failed: %d", ret); + return ret; + } + + ret = reset_deassert(&plat->softreset_ctl); + if (ret < 0) { + error("DWC3 soft reset deassert failed: %d", ret); + goto softreset_err; + } + + ret = sti_dwc3_glue_drd_init(plat); + if (ret) + goto init_err; + + sti_dwc3_glue_init(plat); + + return 0; + +init_err: + ret = reset_assert(&plat->softreset_ctl); + if (ret < 0) { + error("DWC3 soft reset deassert failed: %d", ret); + return ret; + } + +softreset_err: + ret = reset_assert(&plat->powerdown_ctl); + if (ret < 0) + error("DWC3 powerdown reset deassert failed: %d", ret); + + return ret; +} + +static int sti_dwc3_glue_remove(struct udevice *dev) +{ + struct sti_dwc3_glue_platdata *plat = dev_get_platdata(dev); + int ret; + + /* assert both powerdown and softreset */ + ret = reset_assert(&plat->powerdown_ctl); + if (ret < 0) { + error("DWC3 powerdown reset deassert failed: %d", ret); + return ret; + } + + ret = reset_assert(&plat->softreset_ctl); + if (ret < 0) + error("DWC3 soft reset deassert failed: %d", ret); + + return ret; +} + +static const struct udevice_id sti_dwc3_glue_ids[] = { + { .compatible = "st,stih407-dwc3" }, + { } +}; + +U_BOOT_DRIVER(dwc3_sti_glue) = { + .name = "dwc3_sti_glue", + .id = UCLASS_MISC, + .of_match = sti_dwc3_glue_ids, + .ofdata_to_platdata = sti_dwc3_glue_ofdata_to_platdata, + .probe = sti_dwc3_glue_probe, + .remove = sti_dwc3_glue_remove, + .bind = sti_dwc3_glue_bind, + .platdata_auto_alloc_size = sizeof(struct sti_dwc3_glue_platdata), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; |