summaryrefslogtreecommitdiff
path: root/board/warp/README
diff options
context:
space:
mode:
Diffstat (limited to 'board/warp/README')
-rw-r--r--board/warp/README12
1 files changed, 6 insertions, 6 deletions
diff --git a/board/warp/README b/board/warp/README
index 22f9055eb6..3cfd22ec76 100644
--- a/board/warp/README
+++ b/board/warp/README
@@ -1,4 +1,4 @@
-How to Update U-boot on Warp board
+How to Update U-Boot on Warp board
----------------------------------
Required software on the host PC:
@@ -7,13 +7,13 @@ Required software on the host PC:
- dfu-util: http://dfu-util.sourceforge.net/releases/
-Build U-boot for Warp:
+Build U-Boot for Warp:
$ make mrproper
$ make warp_config
$ make
-This will generate the U-boot binary called u-boot.imx.
+This will generate the U-Boot binary called u-boot.imx.
Put warp board in USB download mode
@@ -29,7 +29,7 @@ Load u-boot.imx via USB:
$ sudo ./imx_usb u-boot.imx
-Then U-boot should start and its messages will appear in the console program.
+Then U-Boot should start and its messages will appear in the console program.
Use the default environment variables:
@@ -43,7 +43,7 @@ Transfer u-boot.imx that will be flashed into the eMMC:
$ sudo dfu-util -D u-boot.imx -a boot
-Then on the U-boot prompt the following message should be seen after a
+Then on the U-Boot prompt the following message should be seen after a
successful upgrade:
#DOWNLOAD ... OK
@@ -53,4 +53,4 @@ Remove power from the warp board.
Put warp board into normal boot mode
-Power up the board and the new updated U-boot should boot from eMMC
+Power up the board and the new updated U-Boot should boot from eMMC