summaryrefslogtreecommitdiff
path: root/board/freescale/p1010rdb/README.P1010RDB-PA
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/p1010rdb/README.P1010RDB-PA')
-rw-r--r--board/freescale/p1010rdb/README.P1010RDB-PA6
1 files changed, 3 insertions, 3 deletions
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index cde246dde2..105942f7a5 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -95,7 +95,7 @@ is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
instead of to CAN/UART1.
-Build and burn u-boot to NOR flash
+Build and burn U-Boot to NOR flash
==================================
1. Build u-boot.bin image
export ARCH=powerpc
@@ -131,7 +131,7 @@ CPLD NOR bank selection register address 0xFFB00009 Bit[0]:
1 - boot from lower 4 sectors
-Build and burn u-boot to NAND flash
+Build and burn U-Boot to NAND flash
===================================
1. Build u-boot.bin image
export ARCH=powerpc
@@ -146,7 +146,7 @@ Build and burn u-boot to NAND flash
3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
-Build and burn u-boot to SPI flash
+Build and burn U-Boot to SPI flash
==================================
1. Build u-boot-spi.bin image
make P1010RDB_SPIFLASH_config; make