summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc8260/cpu_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/mpc8260/cpu_init.c')
-rw-r--r--arch/powerpc/cpu/mpc8260/cpu_init.c272
1 files changed, 0 insertions, 272 deletions
diff --git a/arch/powerpc/cpu/mpc8260/cpu_init.c b/arch/powerpc/cpu/mpc8260/cpu_init.c
deleted file mode 100644
index 55130f7831..0000000000
--- a/arch/powerpc/cpu/mpc8260/cpu_init.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-#include <ioports.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-extern unsigned long board_get_cpu_clk_f (void);
-#endif
-
-static void config_8260_ioports (volatile immap_t * immr)
-{
- int portnum;
-
- for (portnum = 0; portnum < 4; portnum++) {
- uint pmsk = 0,
- ppar = 0,
- psor = 0,
- pdir = 0,
- podr = 0,
- pdat = 0;
- iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
- iop_conf_t *eiopc = iopc + 32;
- uint msk = 1;
-
- /*
- * NOTE:
- * index 0 refers to pin 31,
- * index 31 refers to pin 0
- */
- while (iopc < eiopc) {
- if (iopc->conf) {
- pmsk |= msk;
- if (iopc->ppar)
- ppar |= msk;
- if (iopc->psor)
- psor |= msk;
- if (iopc->pdir)
- pdir |= msk;
- if (iopc->podr)
- podr |= msk;
- if (iopc->pdat)
- pdat |= msk;
- }
-
- msk <<= 1;
- iopc++;
- }
-
- if (pmsk != 0) {
- volatile ioport_t *iop = ioport_addr (immr, portnum);
- uint tpmsk = ~pmsk;
-
- /*
- * the (somewhat confused) paragraph at the
- * bottom of page 35-5 warns that there might
- * be "unknown behaviour" when programming
- * PSORx and PDIRx, if PPARx = 1, so I
- * decided this meant I had to disable the
- * dedicated function first, and enable it
- * last.
- */
- iop->ppar &= tpmsk;
- iop->psor = (iop->psor & tpmsk) | psor;
- iop->podr = (iop->podr & tpmsk) | podr;
- iop->pdat = (iop->pdat & tpmsk) | pdat;
- iop->pdir = (iop->pdir & tpmsk) | pdir;
- iop->ppar |= ppar;
- }
- }
-}
-
-#define SET_VAL_MASK(a, b, mask) ((a & mask) | (b & ~mask))
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * immr)
-{
- uint sccr;
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
- unsigned long cpu_clk;
-#endif
- volatile memctl8260_t *memctl = &immr->im_memctl;
- extern void m8260_cpm_reset (void);
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* RSR - Reset Status Register - clear all status (5-4) */
- gd->arch.reset_status = immr->im_clkrst.car_rsr;
- immr->im_clkrst.car_rsr = RSR_ALLBITS;
-
- /* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */
- immr->im_clkrst.car_rmr = CONFIG_SYS_RMR;
-
- /* BCR - Bus Configuration Register (4-25) */
-#if defined(CONFIG_SYS_BCR_60x) && (CONFIG_SYS_BCR_SINGLE)
- if (immr->im_siu_conf.sc_bcr & BCR_EBM) {
- immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_60x, 0x80000010);
- } else {
- immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_SINGLE, 0x80000010);
- }
-#else
- immr->im_siu_conf.sc_bcr = CONFIG_SYS_BCR;
-#endif
-
- /* SIUMCR - contains debug pin configuration (4-31) */
-#if defined(CONFIG_SYS_SIUMCR_LOW) && (CONFIG_SYS_SIUMCR_HIGH)
- cpu_clk = board_get_cpu_clk_f ();
- if (cpu_clk >= 100000000) {
- immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_HIGH, 0x9f3cc000);
- } else {
- immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_LOW, 0x9f3cc000);
- }
-#else
- immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
-#endif
-
- config_8260_ioports (immr);
-
- /* initialize time counter status and control register (4-40) */
- immr->im_sit.sit_tmcntsc = CONFIG_SYS_TMCNTSC;
-
- /* initialize the PIT (4-42) */
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
- /* System clock control register (9-8) */
- sccr = immr->im_clkrst.car_sccr &
- (SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK);
- immr->im_clkrst.car_sccr = sccr |
- (CONFIG_SYS_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) );
-
- /*
- * Memory Controller:
- */
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- /* the PS came from the HRCW, don't change it */
- memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK);
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR8_PRELIM) && defined(CONFIG_SYS_OR8_PRELIM)
- memctl->memc_or8 = CONFIG_SYS_OR8_PRELIM;
- memctl->memc_br8 = CONFIG_SYS_BR8_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR9_PRELIM) && defined(CONFIG_SYS_OR9_PRELIM)
- memctl->memc_or9 = CONFIG_SYS_OR9_PRELIM;
- memctl->memc_br9 = CONFIG_SYS_BR9_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR10_PRELIM) && defined(CONFIG_SYS_OR10_PRELIM)
- memctl->memc_or10 = CONFIG_SYS_OR10_PRELIM;
- memctl->memc_br10 = CONFIG_SYS_BR10_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR11_PRELIM) && defined(CONFIG_SYS_OR11_PRELIM)
- memctl->memc_or11 = CONFIG_SYS_OR11_PRELIM;
- memctl->memc_br11 = CONFIG_SYS_BR11_PRELIM;
-#endif
-
- m8260_cpm_reset ();
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base;
-
- immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
-
- return (0);
-}
-
-/*
- * print out the reason for the reset
- */
-int prt_8260_rsr (void)
-{
- static struct {
- ulong mask;
- char *desc;
- } bits[] = {
- {
- RSR_JTRS, "JTAG"}, {
- RSR_CSRS, "Check Stop"}, {
- RSR_SWRS, "Software Watchdog"}, {
- RSR_BMRS, "Bus Monitor"}, {
- RSR_ESRS, "External Soft"}, {
- RSR_EHRS, "External Hard"}
- };
- static int n = ARRAY_SIZE(bits);
- ulong rsr = gd->arch.reset_status;
- int i;
- char *sep;
-
- puts (CPU_ID_STR " Reset Status:");
-
- sep = " ";
- for (i = 0; i < n; i++)
- if (rsr & bits[i].mask) {
- printf ("%s%s", sep, bits[i].desc);
- sep = ", ";
- }
-
- puts ("\n\n");
- return (0);
-}