arm: mach-omap2: am33xx: Add device structure for spi

Add platform data and a device structure for the spi device
present on am335x-icev2. This requires moving all omap3_spi
platform data structures and symbols to an omap3_spi.h so that
the board file can access them.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>

1 files changed, 78 insertions, 0 deletions

diff --git a/include/omap3_spi.h b/include/omap3_spi.h
new file mode 100644
index 0000000000..cae3770583
--- /dev/null
+++ b/include/omap3_spi.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef __OMAP3_SPI_H_
+#define __OMAP3_SPI_H_
+
+/* per-register bitmasks */
+#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
+#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE	BIT(0)
+#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
+
+#define OMAP3_MCSPI_SYSSTATUS_RESETDONE BIT(0)
+
+#define OMAP3_MCSPI_MODULCTRL_SINGLE	BIT(0)
+#define OMAP3_MCSPI_MODULCTRL_MS	BIT(2)
+#define OMAP3_MCSPI_MODULCTRL_STEST	BIT(3)
+
+#define OMAP3_MCSPI_CHCONF_PHA		BIT(0)
+#define OMAP3_MCSPI_CHCONF_POL		BIT(1)
+#define OMAP3_MCSPI_CHCONF_CLKD_MASK	GENMASK(5, 2)
+#define OMAP3_MCSPI_CHCONF_EPOL		BIT(6)
+#define OMAP3_MCSPI_CHCONF_WL_MASK	GENMASK(11, 7)
+#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY	BIT(12)
+#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY	BIT(13)
+#define OMAP3_MCSPI_CHCONF_TRM_MASK	GENMASK(13, 12)
+#define OMAP3_MCSPI_CHCONF_DMAW		BIT(14)
+#define OMAP3_MCSPI_CHCONF_DMAR		BIT(15)
+#define OMAP3_MCSPI_CHCONF_DPE0		BIT(16)
+#define OMAP3_MCSPI_CHCONF_DPE1		BIT(17)
+#define OMAP3_MCSPI_CHCONF_IS		BIT(18)
+#define OMAP3_MCSPI_CHCONF_TURBO	BIT(19)
+#define OMAP3_MCSPI_CHCONF_FORCE	BIT(20)
+
+#define OMAP3_MCSPI_CHSTAT_RXS		BIT(0)
+#define OMAP3_MCSPI_CHSTAT_TXS		BIT(1)
+#define OMAP3_MCSPI_CHSTAT_EOT		BIT(2)
+
+#define OMAP3_MCSPI_CHCTRL_EN		BIT(0)
+#define OMAP3_MCSPI_CHCTRL_DIS		(0 << 0)
+
+#define OMAP3_MCSPI_WAKEUPENABLE_WKEN	BIT(0)
+#define MCSPI_PINDIR_D0_IN_D1_OUT	0
+#define MCSPI_PINDIR_D0_OUT_D1_IN	1
+
+#define OMAP3_MCSPI_MAX_FREQ		48000000
+#define SPI_WAIT_TIMEOUT		10
+
+#define OMAP4_MCSPI_REG_OFFSET	0x100
+
+/* OMAP3 McSPI registers */
+struct mcspi_channel {
+	unsigned int chconf;		/* 0x2C, 0x40, 0x54, 0x68 */
+	unsigned int chstat;		/* 0x30, 0x44, 0x58, 0x6C */
+	unsigned int chctrl;		/* 0x34, 0x48, 0x5C, 0x70 */
+	unsigned int tx;		/* 0x38, 0x4C, 0x60, 0x74 */
+	unsigned int rx;		/* 0x3C, 0x50, 0x64, 0x78 */
+};
+
+struct mcspi {
+	unsigned char res1[0x10];
+	unsigned int sysconfig;		/* 0x10 */
+	unsigned int sysstatus;		/* 0x14 */
+	unsigned int irqstatus;		/* 0x18 */
+	unsigned int irqenable;		/* 0x1C */
+	unsigned int wakeupenable;	/* 0x20 */
+	unsigned int syst;		/* 0x24 */
+	unsigned int modulctrl;		/* 0x28 */
+	struct mcspi_channel channel[4];
+	/* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
+	/* channel1: 0x40 - 0x50, bus 0 & 1 */
+	/* channel2: 0x54 - 0x64, bus 0 & 1 */
+	/* channel3: 0x68 - 0x78, bus 0 */
+};
+
+struct omap3_spi_plat {
+	struct mcspi *regs;
+	unsigned int pin_dir:1;
+};
+#endif