logodl: remove code for yet another corpse

The logodl board has long been unmaintained and left broken.
As obviously nobody is interestedin that code any more, we may as well
remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: August Hoeraendl <august.hoerandl@gmx.at>
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Marek Vasut <marek.vasut@gmail.com>

1 files changed, 0 insertions, 134 deletions

diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c
deleted file mode 100644
index 2562ecca35..0000000000
--- a/board/logodl/logodl.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * (C) 2002 Kyle Harris <kharris@nexus-tech.net>, Nexus Technologies, Inc.
- * (C) 2002 Marius Groeger <mgroeger@sysgo.de>, Sysgo GmbH
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/**
- * board_init: - setup some data structures
- *
- * @return: 0 in case of success
- */
-
-int board_init (void)
-{
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	gd->bd->bi_arch_number = MACH_TYPE_LOGODL;
-	gd->bd->bi_boot_params = 0x08000100;
-	gd->bd->bi_baudrate = CONFIG_BAUDRATE;
-
-	(*((volatile short*)0x14800000)) = 0xff; /* power on eth0 */
-	(*((volatile short*)0x14000000)) = 0xff; /* power on uart */
-
-	return 0;
-}
-
-
-/**
- * dram_init: - setup dynamic RAM
- *
- * @return: 0 in case of success
- */
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-
-/**
- * logodl_set_led: - switch LEDs on or off
- *
- * @param led:   LED to switch (0,1)
- * @param state: switch on (1) or off (0)
- */
-
-void logodl_set_led(int led, int state)
-{
-	switch(led) {
-
-	case 0:
-		if (state==1) {
-			CONFIG_SYS_LED_A_CR = CONFIG_SYS_LED_A_BIT;
-		} else if (state==0) {
-			CONFIG_SYS_LED_A_SR = CONFIG_SYS_LED_A_BIT;
-		}
-		break;
-
-	case 1:
-		if (state==1) {
-			CONFIG_SYS_LED_B_CR = CONFIG_SYS_LED_B_BIT;
-		} else if (state==0) {
-			CONFIG_SYS_LED_B_SR = CONFIG_SYS_LED_B_BIT;
-		}
-		break;
-	}
-
-	return;
-}
-
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The LOGOTRONIC does only have 2 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
-	if (status < -32) status = -1;  /* let things compatible */
-	/*
-	  switch(status) {
-	  case  1: logodl_set_led(0,1); break;
-	  case  5: logodl_set_led(1,1); break;
-	  case 15: logodl_set_led(2,1); break;
-	  }
-	*/
-	logodl_set_led(0, (status & 1)==1);
-	logodl_set_led(1, (status & 2)==2);
-
-	return;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif