logodl: remove code for yet another corpse

The logodl board has long been unmaintained and left broken.
As obviously nobody is interestedin that code any more, we may as well
remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: August Hoeraendl <august.hoerandl@gmx.at>
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Marek Vasut <marek.vasut@gmail.com>

1 files changed, 0 insertions, 829 deletions

diff --git a/board/logodl/flash.c b/board/logodl/flash.c
deleted file mode 100644
index 593943ffda..0000000000
--- a/board/logodl/flash.c
+++ /dev/null
@@ -1,829 +0,0 @@
-/*
- * (C) 2000 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) 2003 August Hoeraendl, Logotronic GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#undef CONFIG_FLASH_16BIT
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x1000000
-#define MAIN_SECT_SIZE  0x20000		/* 2x64k = 128k per sector */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- *        has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFFFFFF
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-#define write_word(in, de, da)   write_word_amd(in, de, da)
-static void flash_get_offsets(ulong base, flash_info_t *info);
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-static void flash_sync_real_protect(flash_info_t *info);
-#endif
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-ulong flash_init(void)
-{
-    int i, j;
-    ulong size = 0;
-
-    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
-    {
-	ulong flashbase = 0;
-	flash_info[i].flash_id =
-	  (FLASH_MAN_AMD & FLASH_VENDMASK) |
-	  (FLASH_AM640U & FLASH_TYPEMASK);
-	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-	switch (i)
-	{
-	   case 0:
-		flashbase = PHYS_FLASH_1;
-		break;
-	   case 1:
-		flashbase = PHYS_FLASH_2;
-		break;
-	   default:
-		panic("configured too many flash banks!\n");
-		break;
-	}
-	for (j = 0; j < flash_info[i].sector_count; j++)
-	{
-	    flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
-	}
-	size += flash_info[i].size;
-    }
-
-    /* Protect monitor and environment sectors
-     */
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_SYS_FLASH_BASE,
-		  CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
-		  &flash_info[0]);
-
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_ENV_ADDR,
-		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-		  &flash_info[0]);
-
-    return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	FPWV *base = (FPWV *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
-	    && (info->flash_id & FLASH_BTYPE)) {
-		int bootsect_size;	/* number of bytes/boot sector	*/
-		int sect_size;		/* number of bytes/regular sector */
-
-		bootsect_size = 0x00002000 * (sizeof(FPW)/2);
-		sect_size =     0x00010000 * (sizeof(FPW)/2);
-
-		/* set sector offsets for bottom boot block type	*/
-		for (i = 0; i < 8; ++i) {
-			info->start[i] = base + (i * bootsect_size);
-		}
-		for (i = 8; i < info->sector_count; i++) {
-			info->start[i] = base + ((i - 7) * sect_size);
-		}
-	}
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
-		 && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
-		int sect_size;		/* number of bytes/sector */
-
-		sect_size = 0x00010000 * (sizeof(FPW)/2);
-
-		/* set up sector start address table (uniform sector type) */
-		for( i = 0; i < info->sector_count; i++ )
-			info->start[i] = base + (i * sect_size);
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	uchar *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	}
-	else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM640U:
-		fmt = "29LV641D (64 Mbit, uniform sectors)\n";
-		break;
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-		fmt = "28F800C3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL800B:
-	case FLASH_INTEL800T:
-		fmt = "28F800B3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-		fmt = "28F160C3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL160B:
-	case FLASH_INTEL160T:
-		fmt = "28F160B3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-		fmt = "28F320C3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL320B:
-	case FLASH_INTEL320T:
-		fmt = "28F320B3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		fmt = "28F640C3%s (64 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL640B:
-	case FLASH_INTEL640T:
-		fmt = "28F640B3%s (64 Mbit, %s)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf (fmt, bootletter, boottype);
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	/* Write auto select command: read Manufacturer ID */
-
-	/* Write auto select command sequence and test FLASH answer */
-	addr[0x0555] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[0x02AA] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
-	addr[0x0555] = (FPW)0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	switch (addr[0] & 0xff) {
-
-	case (uchar)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-	case (uchar)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch (addr[1]) {
-
-	case (FPW)AMD_ID_LV640U:	/* 29LV640 and 29LV641 have same ID */
-		info->flash_id += FLASH_AM640U;
-		info->sector_count = 128;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	case (FPW)INTEL_ID_28F800C3B:
-		info->flash_id += FLASH_28F800C3B;
-		info->sector_count = 23;
-		info->size = 0x00100000 * (sizeof(FPW)/2);
-		break;				/* => 1 or 2 MB		*/
-
-	case (FPW)INTEL_ID_28F800B3B:
-		info->flash_id += FLASH_INTEL800B;
-		info->sector_count = 23;
-		info->size = 0x00100000 * (sizeof(FPW)/2);
-		break;				/* => 1 or 2 MB		*/
-
-	case (FPW)INTEL_ID_28F160C3B:
-		info->flash_id += FLASH_28F160C3B;
-		info->sector_count = 39;
-		info->size = 0x00200000 * (sizeof(FPW)/2);
-		break;				/* => 2 or 4 MB		*/
-
-	case (FPW)INTEL_ID_28F160B3B:
-		info->flash_id += FLASH_INTEL160B;
-		info->sector_count = 39;
-		info->size = 0x00200000 * (sizeof(FPW)/2);
-		break;				/* => 2 or 4 MB		*/
-
-	case (FPW)INTEL_ID_28F320C3B:
-		info->flash_id += FLASH_28F320C3B;
-		info->sector_count = 71;
-		info->size = 0x00400000 * (sizeof(FPW)/2);
-		break;				/* => 4 or 8 MB		*/
-
-	case (FPW)INTEL_ID_28F320B3B:
-		info->flash_id += FLASH_INTEL320B;
-		info->sector_count = 71;
-		info->size = 0x00400000 * (sizeof(FPW)/2);
-		break;				/* => 4 or 8 MB		*/
-
-	case (FPW)INTEL_ID_28F640C3B:
-		info->flash_id += FLASH_28F640C3B;
-		info->sector_count = 135;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	case (FPW)INTEL_ID_28F640B3B:
-		info->flash_id += FLASH_INTEL640B;
-		info->sector_count = 135;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
-	}
-
-	flash_get_offsets((ulong)addr, info);
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-
-static void flash_sync_real_protect(flash_info_t *info)
-{
-    FPWV *addr = (FPWV *)(info->start[0]);
-    FPWV *sect;
-    int i;
-
-    switch (info->flash_id & FLASH_TYPEMASK) {
-    case FLASH_28F800C3B:
-    case FLASH_28F800C3T:
-    case FLASH_28F160C3B:
-    case FLASH_28F160C3T:
-    case FLASH_28F320C3B:
-    case FLASH_28F320C3T:
-    case FLASH_28F640C3B:
-    case FLASH_28F640C3T:
-	/* check for protected sectors */
-	*addr = (FPW)0x00900090;
-	for (i = 0; i < info->sector_count; i++) {
-	    /* read sector protection at sector address, (A7 .. A0) = 0x02.
-	     * D0 = 1 for each device if protected.
-	     * If at least one device is protected the sector is marked
-	     * protected, but mixed protected and  unprotected devices
-	     * within a sector should never happen.
-	     */
-	    sect = (FPWV *)(info->start[i]);
-	    info->protect[i] = (sect[2] & (FPW)(0x00010001)) ? 1 : 0;
-	}
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-	break;
-
-    case FLASH_AM640U:
-    default:
-	/* no hardware protect that we support */
-	break;
-    }
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_INTEL800B:
-	case FLASH_INTEL160B:
-	case FLASH_INTEL320B:
-	case FLASH_INTEL640B:
-	case FLASH_28F800C3B:
-	case FLASH_28F160C3B:
-	case FLASH_28F320C3B:
-	case FLASH_28F640C3B:
-	case FLASH_AM640U:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	start = get_timer(0);
-	last  = start;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *)(info->start[sect]);
-		if (intel) {
-			*addr = (FPW)0x00500050; /* clear status register */
-			*addr = (FPW)0x00200020; /* erase setup */
-			*addr = (FPW)0x00D000D0; /* erase confirm */
-		}
-		else {
-			/* must be AMD style if not Intel */
-			FPWV *base;		/* first address in bank */
-
-			base = (FPWV *)(info->start[0]);
-			base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-			base[0x02AA] = (FPW)0x00550055;	/* unlock */
-			base[0x0555] = (FPW)0x00800080;	/* erase mode */
-			base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-			base[0x02AA] = (FPW)0x00550055;	/* unlock */
-			*addr = (FPW)0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* wait at least 50us for AMD, 80us for Intel.
-		 * Let's wait 1 ms.
-		 */
-		udelay (1000);
-
-		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-
-				if (intel) {
-					/* suspend erase	*/
-					*addr = (FPW)0x00B000B0;
-				}
-
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;		/* failed */
-				break;
-			}
-
-			/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-				putc ('.');
-				last = now;
-			}
-		}
-
-		flash_reset(info);	/* reset to read mode	*/
-	}
-
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int bad_write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-    FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
-    int bytes;	  /* number of bytes to program in current word		*/
-    int left;	  /* number of bytes left to program			*/
-    int i, res;
-
-    for (left = cnt, res = 0;
-	 left > 0 && res == 0;
-	 addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-	bytes = addr & (sizeof(data) - 1);
-	addr &= ~(sizeof(data) - 1);
-
-	/* combine source and destination data so can program
-	 * an entire word of 16 or 32 bits
-	 */
-	for (i = 0; i < sizeof(data); i++) {
-	    data <<= 8;
-	    if (i < bytes || i - bytes >= left )
-		data += *((uchar *)addr + i);
-	    else
-		data += *src++;
-	}
-
-	/* write one word to the flash */
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		res = write_word_amd(info, (FPWV *)addr, data);
-		break;
-	case FLASH_MAN_INTEL:
-		res = write_word_intel(info, (FPWV *)addr, data);
-		break;
-	default:
-		/* unknown flash type, error! */
-		printf ("missing or unknown FLASH type\n");
-		res = 1;	/* not really a timeout, but gives error */
-		break;
-	}
-    }
-
-    return (res);
-}
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src:	source of copy transaction
- * @param addr:	where to copy to
- * @param cnt:	number of bytes to copy
- *
- * @return	error code
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-		for (; i<2 && cnt>0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<2; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 2) {
-		/* data = *((vushort*)src); */
-		data = *((FPW*)src);
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += sizeof(FPW);
-		wp  += sizeof(FPW);
-		cnt -= sizeof(FPW);
-	}
-
-	if (cnt == 0) return ERR_OK;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i<2; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *)cp << 8);
-	}
-
-	return write_word(info, wp, data);
-}
-
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
-    ulong start;
-    int flag;
-    int res = 0;	/* result, assume success	*/
-    FPWV *base;		/* first address in flash bank	*/
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*dest & data) != data) {
-	return (2);
-    }
-
-
-    base = (FPWV *)(info->start[0]);
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-    base[0x02AA] = (FPW)0x00550055;	/* unlock */
-    base[0x0555] = (FPW)0x00A000A0;	/* selects program mode */
-
-    *dest = data;		/* start programming the data	*/
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    start = get_timer (0);
-
-    /* data polling for D7 */
-    while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-	    *dest = (FPW)0x00F000F0;	/* reset bank */
-	    res = 1;
-	}
-    }
-
-    return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
-{
-    ulong start;
-    int flag;
-    int res = 0;	/* result, assume success	*/
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*dest & data) != data) {
-	return (2);
-    }
-
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    *dest = (FPW)0x00500050;	/* clear status register	*/
-    *dest = (FPW)0x00FF00FF;	/* make sure in read mode	*/
-    *dest = (FPW)0x00400040;	/* program setup		*/
-
-    *dest = data;		/* start programming the data	*/
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    start = get_timer (0);
-
-    while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
-	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-	    *dest = (FPW)0x00B000B0;	/* Suspend program	*/
-	    res = 1;
-	}
-    }
-
-    if (res == 0 && (*dest & (FPW)0x00100010))
-	res = 1;	/* write failed, time out error is close enough	*/
-
-    *dest = (FPW)0x00500050;	/* clear status register	*/
-    *dest = (FPW)0x00FF00FF;	/* make sure in read mode	*/
-
-    return (res);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect (flash_info_t * info, long sector, int prot)
-{
-	int rcode = 0;		/* assume success */
-	FPWV *addr;		/* address of sector */
-	FPW value;
-
-	addr = (FPWV *) (info->start[sector]);
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		flash_reset (info);		/* make sure in read mode */
-		*addr = (FPW) 0x00600060L;	/* lock command setup */
-		if (prot)
-			*addr = (FPW) 0x00010001L;	/* lock sector */
-		else
-			*addr = (FPW) 0x00D000D0L;	/* unlock sector */
-		flash_reset (info);		/* reset to read mode */
-
-		/* now see if it really is locked/unlocked as requested */
-		*addr = (FPW) 0x00900090;
-		/* read sector protection at sector address, (A7 .. A0) = 0x02.
-		 * D0 = 1 for each device if protected.
-		 * If at least one device is protected the sector is marked
-		 * protected, but return failure. Mixed protected and
-		 * unprotected devices within a sector should never happen.
-		 */
-		value = addr[2] & (FPW) 0x00010001;
-		if (value == 0)
-			info->protect[sector] = 0;
-		else if (value == (FPW) 0x00010001)
-			info->protect[sector] = 1;
-		else {
-			/* error, mixed protected and unprotected */
-			rcode = 1;
-			info->protect[sector] = 1;
-		}
-		if (info->protect[sector] != prot)
-			rcode = 1;	/* failed to protect/unprotect as requested */
-
-		/* reload all protection bits from hardware for now */
-		flash_sync_real_protect (info);
-		break;
-
-	case FLASH_AM640U:
-	default:
-		/* no hardware protect that we support */
-		info->protect[sector] = prot;
-		break;
-	}
-
-	return rcode;
-}
-#endif