diff options
Diffstat (limited to 'include/configs/SXNI855T.h')
| -rw-r--r-- | include/configs/SXNI855T.h | 47 |
1 files changed, 44 insertions, 3 deletions
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index a7f0c21967..bdaf683c36 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -143,11 +143,52 @@ #define CFG_DISCOVER_PHY -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_EEPROM | CFG_CMD_DATE) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EEPROM | \ + CFG_CMD_NAND | \ + CFG_CMD_DATE) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +/* NAND flash support */ +#define CONFIG_MTD_NAND_ECC_JFFS2 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +/* DFBUSY is available on Port C, bit 12; 0 if busy */ +#define NAND_WAIT_READY(nand) \ + while (!(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & 0x0008)); +#define WRITE_NAND_COMMAND(d, adr) WRITE_NAND((d), (adr)) +#define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND((d), (adr)) +#define WRITE_NAND(d, adr) \ + do { (*(volatile uint8_t *)(adr) = (uint8_t)(d)); } while (0) +#define READ_NAND(adr) (*(volatile uint8_t *)(adr)) +#define CLE_LO 0x01 /* 0 selects CLE mode (CLE high) */ +#define ALE_LO 0x02 /* 0 selects ALE mode (ALE high) */ +#define CE_LO 0x04 /* 1 selects chip (CE low) */ +#define nand_setcr(cr, val) do {*(volatile uint8_t*)(cr) = (val);} while (0) +#define NAND_DISABLE_CE(nand) \ + nand_setcr((nand)->IO_ADDR + 1, ALE_LO | CLE_LO) +#define NAND_ENABLE_CE(nand) \ + nand_setcr((nand)->IO_ADDR + 1, CE_LO | ALE_LO | CLE_LO) +#define NAND_CTL_CLRALE(nandptr) \ + nand_setcr((nandptr) + 1, CE_LO | ALE_LO | CLE_LO) +#define NAND_CTL_SETALE(nandptr) \ + nand_setcr((nandptr) + 1, CE_LO | CLE_LO) +#define NAND_CTL_CLRCLE(nandptr) \ + nand_setcr((nandptr) + 1, CE_LO | ALE_LO | CLE_LO) +#define NAND_CTL_SETCLE(nandptr) \ + nand_setcr((nandptr) + 1, CE_LO | ALE_LO) + /* * Miscellaneous configurable options */ @@ -329,7 +370,7 @@ * These preliminary values are also the final values. */ #define CFG_OR_TIMING_FPGA \ - (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_5_CLK | OR_EHTR) + (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_4_CLK | OR_EHTR | OR_TRLX) #define CFG_BR1_PRELIM ((CFG_FPGA_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) #define CFG_OR1_PRELIM (((-CFG_FPGA_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_FPGA) @@ -338,7 +379,7 @@ * These preliminary values are also the final values. */ #define CFG_OR_TIMING_DFLASH \ - (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_EHTR) + (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK | OR_EHTR | OR_TRLX) #define CFG_BR4_PRELIM ((CFG_DFLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) #define CFG_OR4_PRELIM (((-CFG_DFLASH_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_DFLASH) |