diff options
Diffstat (limited to 'board/canmb/canmb.c')
| -rw-r--r-- | board/canmb/canmb.c | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c new file mode 100644 index 0000000000..172fcd7bc7 --- /dev/null +++ b/board/canmb/canmb.c @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2003 + * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> + +/***************************************************************************** + * initialize SDRAM/DDRAM controller. + * TBD: get data from I2C EEPROM + *****************************************************************************/ +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT +#if 0 + ulong t; + ulong tap_del; +#endif + + #define MODE_EN 0x80000000 + #define SOFT_PRE 2 + #define SOFT_REF 4 + + /* configure SDRAM start/end */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CFG_SDRAM_BASE & 0xFFF00000) | CFG_DRAM_RAM_SIZE; + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x8000000; + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CFG_DRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CFG_DRAM_CONFIG2; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN; + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE; +#ifdef CFG_DRAM_DDR + /* set extended mode register */ + *(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE; +#endif + /* set mode register */ + *(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE | 0x0400; + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE; + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_REF; + /* set mode register */ + *(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE; + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL; + /* write default TAP delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24; + +#endif /* CFG_RAMBOOT */ + + dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20) + + ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS1CFG - 0x13)) << 20); + + /* return total ram size */ + return dramsize; +} + +/***************************************************************************** + * print board identification + *****************************************************************************/ +int checkboard (void) +{ + puts ("Board: CANMB\n"); + return 0; +} + +int board_early_init_r (void) +{ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ + *(vu_long *)MPC5XXX_BOOTCS_START = + *(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE); + *(vu_long *)MPC5XXX_BOOTCS_STOP = + *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE); + return 0; +} |