summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/arch-ivybridge/pei_data.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/include/asm/arch-ivybridge/pei_data.h')
-rw-r--r--arch/x86/include/asm/arch-ivybridge/pei_data.h121
1 files changed, 121 insertions, 0 deletions
diff --git a/arch/x86/include/asm/arch-ivybridge/pei_data.h b/arch/x86/include/asm/arch-ivybridge/pei_data.h
new file mode 100644
index 0000000000..5026c8bab3
--- /dev/null
+++ b/arch/x86/include/asm/arch-ivybridge/pei_data.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2011, Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef ASM_ARCH_PEI_DATA_H
+#define ASM_ARCH_PEI_DATA_H
+
+struct pch_usb3_controller_settings {
+ /* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
+ uint16_t mode;
+ /* 4 bit mask, 1: switchable, 0: not switchable */
+ uint16_t hs_port_switch_mask;
+ /* 0: No xHCI preOS driver, 1: xHCI preOS driver */
+ uint16_t preboot_support;
+ /* 0: Disable, 1: Enable */
+ uint16_t xhci_streams;
+};
+
+typedef asmlinkage void (*tx_byte_func)(unsigned char byte);
+
+#define PEI_VERSION 6
+
+struct __packed pei_data {
+ uint32_t pei_version;
+ uint32_t mchbar;
+ uint32_t dmibar;
+ uint32_t epbar;
+ uint32_t pciexbar;
+ uint16_t smbusbar;
+ uint32_t wdbbar;
+ uint32_t wdbsize;
+ uint32_t hpet_address;
+ uint32_t rcba;
+ uint32_t pmbase;
+ uint32_t gpiobase;
+ uint32_t thermalbase;
+ uint32_t system_type; /* 0 Mobile, 1 Desktop/Server */
+ uint32_t tseg_size;
+ uint8_t spd_addresses[4];
+ uint8_t ts_addresses[4];
+ int boot_mode;
+ int ec_present;
+ int gbe_enable;
+ /*
+ * 0 = leave channel enabled
+ * 1 = disable dimm 0 on channel
+ * 2 = disable dimm 1 on channel
+ * 3 = disable dimm 0+1 on channel
+ */
+ int dimm_channel0_disabled;
+ int dimm_channel1_disabled;
+ /* Seed values saved in CMOS */
+ uint32_t scrambler_seed;
+ uint32_t scrambler_seed_s3;
+ /* Data read from flash and passed into MRC */
+ unsigned char *mrc_input;
+ unsigned int mrc_input_len;
+ /* Data from MRC that should be saved to flash */
+ unsigned char *mrc_output;
+ unsigned int mrc_output_len;
+ /*
+ * Max frequency DDR3 could be ran at. Could be one of four values:
+ * 800, 1067, 1333, 1600
+ */
+ uint32_t max_ddr3_freq;
+ /*
+ * USB Port Configuration:
+ * [0] = enable
+ * [1] = overcurrent pin
+ * [2] = length
+ *
+ * Ports 0-7 can be mapped to OC0-OC3
+ * Ports 8-13 can be mapped to OC4-OC7
+ *
+ * Port Length
+ * MOBILE:
+ * < 0x050 = Setting 1 (back panel, 1-5in, lowest tx amplitude)
+ * < 0x140 = Setting 2 (back panel, 5-14in, highest tx amplitude)
+ * DESKTOP:
+ * < 0x080 = Setting 1 (front/back panel, <8in, lowest tx amplitude)
+ * < 0x130 = Setting 2 (back panel, 8-13in, higher tx amplitude)
+ * < 0x150 = Setting 3 (back panel, 13-15in, higest tx amplitude)
+ */
+ uint16_t usb_port_config[16][3];
+ /* See the usb3 struct above for details */
+ struct pch_usb3_controller_settings usb3;
+ /*
+ * SPD data array for onboard RAM. Specify address 0xf0,
+ * 0xf1, 0xf2, 0xf3 to index one of the 4 slots in
+ * spd_address for a given "DIMM".
+ */
+ uint8_t spd_data[4][256];
+ tx_byte_func tx_byte;
+ int ddr3lv_support;
+ /*
+ * pcie_init needs to be set to 1 to have the system agent initialise
+ * PCIe. Note: This should only be required if your system has Gen3
+ * devices and it will increase your boot time by at least 100ms.
+ */
+ int pcie_init;
+ /*
+ * N mode functionality. Leave this setting at 0.
+ * 0 Auto
+ * 1 1N
+ * 2 2N
+ */
+ int nmode;
+ /*
+ * DDR refresh rate config. JEDEC Standard No.21-C Annex K allows
+ * for DIMM SPD data to specify whether double-rate is required for
+ * extended operating temperature range.
+ * 0 Enable double rate based upon temperature thresholds
+ * 1 Normal rate
+ * 2 Always enable double rate
+ */
+ int ddr_refresh_rate_config;
+};
+
+#endif