Merge branch 'master' of git://www.denx.de/git/u-boot-imx

13 files changed, 666 insertions, 146 deletions

diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h
index e6a08df4ba..3066fd030e 100644
--- a/include/configs/aristainetos.h
+++ b/include/configs/aristainetos.h
@@ -1,4 +1,5 @@
 /*
+ * (C) Copyright 2015
  * (C) Copyright 2014
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
@@ -24,8 +25,7 @@
 #include <asm/imx-common/gpio.h>
 
 #define CONFIG_MACH_TYPE	4501
-#define CONFIG_MMCROOT		"/dev/mmcblk0p2"
-#define CONFIG_DEFAULT_FDT_FILE	"aristainetos.dtb"
+#define CONFIG_MMCROOT		"/dev/mmcblk0p1"
 #define CONFIG_HOSTNAME		aristainetos
 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
 
@@ -81,7 +81,6 @@
 #define CONFIG_SF_DEFAULT_SPEED		20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
@@ -101,84 +100,108 @@
 #define CONFIG_SYS_TEXT_BASE		0x17800000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"uimage=uImage\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_addr_r=0x11000000\0" \
-	"kernel_addr_r=0x12000000\0" \
-	"kernel_file=uImage\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
+	"script=u-boot.scr\0" \
+	"fit_file=/boot/system.itb\0" \
+	"loadaddr=0x12000000\0" \
+	"fit_addr_r=0x14000000\0" \
+	"uboot=/boot/u-boot.imx\0" \
+	"uboot_sz=d0000\0" \
+	"rescue_sys_addr=f0000\0" \
+	"rescue_sys_length=f10000\0" \
+	"board_type=aristainetos7@1\0" \
+	"panel=lb07wv8\0" \
+	"splashpos=m,m\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
+	"mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \
+	"mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \
+		"-(rescue-system);gpmi-nand:-(ubi)\0" \
+	"addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
+		"default ${board_type}\0" \
+	"get_env=mw ${loadaddr} 0 0x20000;" \
+		"mmc rescan;" \
+		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
+		"env import -t ${loadaddr}\0" \
+	"default_env=mw ${loadaddr} 0 0x20000;" \
+		"env export -t ${loadaddr} serial# ethaddr eth1addr " \
+		"board_type panel;" \
+		"env default -a;" \
+		"env import -t ${loadaddr}\0" \
+	"loadbootscript=" \
+		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
 	"mmcpart=1\0" \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcdev=0\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \
-		"${uimage}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \
-		"${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs;run loadimage loadfdt fdt_setup;" \
-		"bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \
-	"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \
-	"nfsopts=nfsvers=3 nolock rw\0" \
-	"netdev=eth0\0" \
-	"fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\
-	"load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
-	"load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
-	"get_env=mw ${loadaddr} 0x00000000 0x20000;" \
-		"tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \
-		"env import -t ${loadaddr}\0" \
-	"addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \
-	"bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \
-		"${optargs}\0" \
-	"net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
-		"root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
-		"${hostname}:${netdev}:off\0" \
-	"net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \
-		"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"uboot=/tftpboot/aristainetos/u-boot.imx\0" \
-	"load_uboot=tftp ${loadaddr} ${uboot}\0" \
-	"uboot_sz=c0000\0" \
-	"upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
-		"mw.b 10200000 0x00 ${uboot_sz};" \
-		"run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
+		"run mmcargs addmtd addmisc set_fit_default;" \
+		"bootm ${fit_addr_r}\0" \
+	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+		"${fit_file}\0" \
+	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+		"${uboot}\0" \
+	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
+		"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
+		"setexpr uboot_maxsize ${uboot_sz} - 400;" \
+		"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
+		"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 		"sf write ${loadaddr} 400 ${filesize};" \
-		"sf read 10200000 400 ${uboot_sz};" \
-		"cmp.b ${loadaddr} 10200000 bc000\0" \
-	"ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \
-	"load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \
-	"load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \
-	"ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \
-		"run net_args addmtd addmisc;run fdt_setup;" \
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"rootfsname=rootfs\0" \
-	"ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
-		"ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
-		"${hostname}:${netdev}:off\0" \
-	"ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \
-		"run bootargs_defaults ubi_args addmtd addmisc;" \
-		"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \
-	"upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \
-		"ubi write ${loadaddr} rootfs ${filesize}\0" \
-	"ksz=800000\0" \
-	"rootsz=2000000\0" \
-	"usersz=8000000\0" \
-	"ubi_make=run ubi_prep;ubi create kernel ${ksz};" \
-		"ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0"
+		"sf read ${cmp_buf} 400 ${uboot_sz};" \
+		"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
+	"ubiargs=setenv bootargs console=${console},${baudrate} " \
+		"ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \
+	"ubiboot=echo Booting from ubi ...; " \
+		"run ubiargs addmtd addmisc set_fit_default;" \
+		"bootm ${fit_addr_r}\0" \
+	"ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
+		"ubifsload ${fit_addr_r} /boot/system.itb; " \
+		"imi ${fit_addr_r}\0 " \
+	"rescueargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/ram rw\0 " \
+	"rescueboot=echo Booting rescue system from NOR ...; " \
+		"run rescueargs addmtd addmisc set_fit_default;" \
+		"bootm ${fit_addr_r}\0" \
+	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
+		"${rescue_sys_length}; imi ${fit_addr_r}\0 "
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev};" \
 	"if mmc rescan; then " \
-		"run mmcboot;" \
-	"else run ubi_ubi; fi"
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run mmc_load_fit; then " \
+				"run mmcboot; " \
+			"else " \
+				"if run ubifs_load_fit; then " \
+					"run ubiboot; " \
+				"else " \
+					"if run rescue_load_fit; then " \
+						"run rescueboot; " \
+					"else " \
+						"echo RESCUE SYSTEM BOOT " \
+							"FAILURE;" \
+					"fi; " \
+				"fi; " \
+			"fi; " \
+		"fi; " \
+	"else " \
+		"if run ubifs_load_fit; then " \
+			"run ubiboot; " \
+		"else " \
+			"if run rescue_load_fit; then " \
+				"run rescueboot; " \
+			"else " \
+				"echo RESCUE SYSTEM BOOT FAILURE;" \
+			"fi; " \
+		"fi; " \
+	"fi"
 
 #define CONFIG_ARP_TIMEOUT		200UL
 
@@ -227,8 +250,8 @@
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SECT_SIZE		(0x010000)
-#define CONFIG_ENV_OFFSET		(0x0c0000)
-#define CONFIG_ENV_OFFSET_REDUND	(0x0d0000)
+#define CONFIG_ENV_OFFSET		(0x0d0000)
+#define CONFIG_ENV_OFFSET_REDUND	(0x0e0000)
 
 #define CONFIG_OF_LIBFDT
 
@@ -289,9 +312,6 @@
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 
-#define MTDIDS_DEFAULT                  "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT                "mtdparts=gpmi-nand:-(ubi)"
-
 #define CONFIG_MTD_UBI_FASTMAP
 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT	1
 
@@ -321,5 +341,4 @@
 
 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK	66000000
-
 #endif                         /* __ARISTAINETOS_CONFIG_H */
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index f7277eb1d1..1f64495055 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -103,97 +103,98 @@
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"kernel=uImage-cm-fx6\0" \
+	"stdin=serial,usbkbd\0" \
+	"stdout=serial,vga\0" \
+	"stderr=serial,vga\0" \
+	"panel=HDMI\0" \
 	"autoload=no\0" \
+	"kernel=uImage-cm-fx6\0" \
+	"script=boot.scr\0" \
+	"dtb=cm-fx6.dtb\0" \
+	"bootm_low=18000000\0" \
 	"loadaddr=0x10800000\0" \
 	"fdtaddr=0x11000000\0" \
 	"console=ttymxc3,115200\0" \
 	"ethprime=FEC0\0" \
-	"bootscr=boot.scr\0" \
-	"bootm_low=18000000\0" \
 	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
 	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
-	"fdtfile=cm-fx6.dtb\0" \
 	"doboot=bootm ${loadaddr}\0" \
-	"loadfdt=false\0" \
+	"doloadfdt=false\0" \
 	"setboottypez=setenv kernel zImage-cm-fx6;" \
 		"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
-		"setenv loadfdt true;\0" \
+		"setenv doloadfdt true;\0" \
 	"setboottypem=setenv kernel uImage-cm-fx6;" \
 		"setenv doboot bootm ${loadaddr};" \
-		"setenv loadfdt false;\0"\
-	"run_eboot=echo Starting EBOOT ...; "\
-		"mmc dev ${mmcdev} && " \
-		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
-	"mmcdev=2\0" \
+		"setenv doloadfdt false;\0"\
 	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
-	"loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
-	"mmcbootscript=echo Running bootscript from mmc ...; "\
-		"source ${loadaddr}\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"root=${mmcroot} " \
-		"${video}\0" \
-	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
-	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"run doboot\0" \
-	"satadev=0\0" \
 	"sataroot=/dev/sda2 rw rootwait\0" \
-	"sataargs=setenv bootargs console=${console} " \
-		"root=${sataroot} " \
-		"${video}\0" \
-	"loadsatabootscript=load sata ${satadev} ${loadaddr} ${bootscr}\0" \
-	"satabootscript=echo Running bootscript from sata ...; " \
-		"source ${loadaddr}\0" \
-	"sataloadkernel=load sata ${satadev} ${loadaddr} ${kernel}\0" \
-	"sataloadfdt=load sata ${satadev} ${fdtaddr} ${fdtfile}\0" \
-	"sataboot=echo Booting from sata ...; "\
-		"run sataargs; " \
-		"run doboot\0" \
 	"nandroot=/dev/mtdblock4 rw\0" \
 	"nandrootfstype=ubifs\0" \
+	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
+		"${video}\0" \
+	"sataargs=setenv bootargs console=${console} root=${sataroot} " \
+		"${video}\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype} " \
 		"${video}\0" \
-	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} 0 780000; " \
-		"if ${loadfdt}; then " \
+	"nandboot=if run nandloadkernel; then " \
 			"run nandloadfdt;" \
-		"fi; " \
-		"run doboot\0" \
-	"boot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"if run loadmmcbootscript; then " \
-				"run mmcbootscript;" \
-			"else " \
-				"if run mmcloadkernel; then " \
-					"if ${loadfdt}; then " \
-						"run mmcloadfdt;" \
-					"fi;" \
-					"run mmcboot;" \
-				"fi;" \
-			"fi;" \
+			"run setboottypem;" \
+			"run storagebootcmd;" \
+			"run setboottypez;" \
+			"run storagebootcmd;" \
+		"fi;\0" \
+	"run_eboot=echo Starting EBOOT ...; "\
+		"mmc dev 2 && " \
+		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
+	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
+	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
+	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
+	"bootscript=echo Running bootscript from ${storagetype} ...;" \
+		   "source ${loadaddr};\0" \
+	"nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
+	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
+	"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
+	"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
+	"setupnandboot=setenv storagetype nand;\0" \
+	"setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
+	"storagebootcmd=echo Booting from ${storagetype} ...;" \
+			"run ${storagetype}args; run doboot;\0" \
+	"trybootk=if run loadkernel; then " \
+		"if ${doloadfdt}; then " \
+			"run loadfdt;" \
 		"fi;" \
-		"if sata init; then " \
-			"if run loadsatabootscript; then " \
-				"run satabootscript;" \
-			"else "\
-				"if run sataloadkernel; then " \
-					"if ${loadfdt}; then " \
-						"run sataloadfdt; " \
-					"fi;" \
-					"run sataboot;" \
-				"fi;" \
-			"fi;" \
+		"run storagebootcmd;" \
+		"fi;\0" \
+	"trybootsmz=if run loadscript; then " \
+			"run bootscript;" \
 		"fi;" \
-		"run nandboot\0"
+		"run setboottypem;" \
+		"run trybootk;" \
+		"run setboottypez;" \
+		"run trybootk;\0"
 
 #define CONFIG_BOOTCOMMAND \
-	"run setboottypem; run boot"
+	"run setupmmcboot;" \
+	"mmc dev ${storagedev};" \
+	"if mmc rescan; then " \
+		"run trybootsmz;" \
+	"fi;" \
+	"run setupusbboot;" \
+	"if usb start; then "\
+		"if run loadscript; then " \
+			"run bootscript;" \
+		"fi;" \
+	"fi;" \
+	"run setupsataboot;" \
+	"if sata init; then " \
+		"run trybootsmz;" \
+	"fi;" \
+	"run setupnandboot;" \
+	"run nandboot;"
+
+#define CONFIG_PREBOOT		"usb start"
 
 /* SPI */
 #define CONFIG_SPI
@@ -243,6 +244,9 @@
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_SYS_STDIO_DEREGISTER
 
 /* I2C */
 #define CONFIG_CMD_I2C
@@ -281,7 +285,7 @@
 /* misc */
 #define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_STACKSIZE			(128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN			(2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN			(10 * 1024 * 1024)
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
 #define CONFIG_OF_BOARD_SETUP
 
@@ -296,4 +300,24 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 
+/* Display */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_IPUV3_CLK          260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_VIDEO_SW_CURSOR
+
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_BMP_RLE8
+
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
 #endif	/* __CONFIG_CM_FX6_H */
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 9767512a5c..b2a9f35797 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -310,6 +310,7 @@
 
 #define CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 1b9c2773be..21c5dce097 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -61,11 +61,19 @@
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #endif
 
+#if defined(CONFIG_MX6SX)
+#define CONFIG_SPL_BSS_START_ADDR      0x88200000
+#define CONFIG_SPL_BSS_MAX_SIZE        0x100000        /* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START    0x88300000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x3200000       /* 50 MB */
+#define CONFIG_SYS_TEXT_BASE           0x87800000
+#else
 #define CONFIG_SPL_BSS_START_ADDR	0x18200000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
 #define CONFIG_SYS_SPL_MALLOC_START	0x18300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3200000	/* 50 MB */
 #define CONFIG_SYS_TEXT_BASE		0x17800000
 #endif
+#endif
 
 #endif
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index e6c41306a3..c567d9dbb6 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -198,7 +198,7 @@
 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 #else
-#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
+#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #define CONFIG_ENV_IS_IN_MMC
 #endif
 
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index fbaae3f505..404b922d39 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -18,6 +18,12 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"
+#endif
+
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -28,7 +34,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
@@ -255,7 +260,7 @@
 #define FSL_QSPI_FLASH_NUM		2
 #endif
 
-#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
+#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
 
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 255c933baa..c061e93534 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -108,6 +108,16 @@
 #endif
 
 
+/* SPL */
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
+#define CONFIG_SPL_SPI_LOAD
+#endif
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
@@ -159,7 +169,6 @@
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
diff --git a/include/configs/platinum.h b/include/configs/platinum.h
new file mode 100644
index 0000000000..134bb45887
--- /dev/null
+++ b/include/configs/platinum.h
@@ -0,0 +1,319 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PLATINUM_CONFIG_H__
+#define __PLATINUM_CONFIG_H__
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* SPL */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+
+/* Location in NAND to read U-Boot from */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
+
+#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
+#include "mx6_common.h"
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+/*
+ * Console configuration
+ */
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FUSE
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#undef  CONFIG_CMD_IMLS
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_USB
+
+/*
+ * Hardware configuration
+ */
+
+/* GPIO config */
+#define CONFIG_MXC_GPIO
+
+/* UART config */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE			UART1_BASE
+#define CONFIG_BAUDRATE				115200
+#define CONFIG_CONS_INDEX			1
+
+/* I2C config */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED			100000
+
+/* MMC config */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR		0
+#define CONFIG_SYS_FSL_USDHC_NUM		1
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_DOS_PARTITION
+
+/* Ethernet config */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE				ENET_BASE_ADDR
+
+#define CONFIG_PHYLIB
+
+/* USB config */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_MXC_USB_PORT			1
+#define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS			0
+
+/* Memory config */
+#define CONFIG_NR_DRAM_BANKS			1
+#define PHYS_SDRAM				MMDC0_ARB_BASE_ADDR
+#ifndef PHYS_SDRAM_SIZE
+#define PHYS_SDRAM_SIZE				(1024 << 20)
+#endif
+
+#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR		IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - \
+						 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_INIT_RAM_ADDR + \
+						 CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MALLOC_LEN			(16 * 1024 * 1024)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#ifdef CONFIG_CMD_NAND
+
+/* NAND config */
+#define CONFIG_NAND_MXS
+#ifndef CONFIG_SYS_NAND_MAX_CHIPS
+#define CONFIG_SYS_NAND_MAX_CHIPS		2
+#endif
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* DMA config, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
+/* Fuse support */
+#define CONFIG_MXC_OCOTP
+
+/* Environment in NAND */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		(16 << 20)
+#define CONFIG_ENV_SECT_SIZE		(128 << 10)
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+
+#else /* CONFIG_CMD_NAND */
+
+/* Environment in MMC */
+#define CONFIG_ENV_SIZE			(8 << 10)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#endif /* CONFIG_CMD_NAND */
+
+/*
+ * U-Boot configuration
+ */
+
+/* Console boot messages */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Tag config */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Board startup config */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Device tree support */
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_LOADADDR				0x12000000
+#define CONFIG_SYS_TEXT_BASE			0x17800000
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
+						 PHYS_SDRAM_SIZE - (12 << 20))
+
+#define CONFIG_BOOTDELAY			3
+#define CONFIG_BOOTCOMMAND			"run bootubi_scr"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_PREBOOT
+
+#define CONFIG_SYS_CBSIZE			256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
+						 sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR			CONFIG_LOADADDR
+
+/* MTD/UBI/UBIFS config */
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+
+#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
+#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
+				"512k(env1),512k(env2),-(ubi)"
+#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
+#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
+				"512k(env1),512k(env2),495M(ubi0)," \
+				"14M(res0),2M(res1)," \
+				"512k(res2),512k(res3),-(ubi1)"
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+/*
+ * Environment configuration
+ */
+
+#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
+#define CONFIG_COMMON_ENV_UBI						\
+	"setubipartition=env set ubipartition ubi\0"			\
+	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
+#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
+#define CONFIG_COMMON_ENV_UBI						\
+	"setubipartition=env set ubipartition ubi$boot_vol\0"		\
+	"setubirfs=env set ubirfs ubi0:rootfs\0"
+#endif
+
+#define CONFIG_COMMON_ENV_MISC						\
+	"user=user\0"							\
+	"project="CONFIG_PLATINUM_PROJECT"\0"				\
+	"uimage=uImage\0"						\
+	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
+	"serverip=serverip\0"						\
+	"memaddrlinux=0x10800000\0"					\
+	"memaddrsrc=0x11000000\0"					\
+	"memaddrdtb=0x12000000\0"					\
+	"console=ttymxc0\0"						\
+	"baudrate=115200\0"						\
+	"boot_scr=boot.uboot\0"						\
+	"boot_vol=0\0"							\
+	"mtdids="MTDIDS_DEFAULT"\0"					\
+	"mtdparts="MTDPARTS_DEFAULT"\0"					\
+	"mmcfs=ext2\0"							\
+	"mmcrootpart=1\0"						\
+	\
+	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0"	\
+	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
+	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"	\
+	"setubifilelinux=env set ubifilelinux boot/$uimage\0"		\
+	"setubipfiledtb=env set ubifiledtb boot/$dtb\0"			\
+	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"	\
+	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"		\
+	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"			\
+	\
+	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"		\
+	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"			\
+	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"		\
+	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"		\
+	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "	\
+		"$mmcfilelinux\0"					\
+	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "	\
+		"$mmcfiledtb\0"						\
+	\
+	"ubipart=ubi part $ubipartition\0"				\
+	"ubimount=ubifsmount $ubirfs\0"					\
+	\
+	"setbootargscommon=env set bootargs $bootargs "			\
+		"console=$console,$baudrate enable_wait_mode=off\0"	\
+	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0"		\
+	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"		\
+	"setbootargsubirfs=env set bootargs $bootargs "			\
+		"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
+	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "	\
+		"nfsroot=$serverip:$nfspath,v3,tcp\0"			\
+	"setbootargsmmcrfs=env set bootargs $bootargs "			\
+		"root=$mmcrootdev rootwait rw\0"			\
+	\
+	"bootnet=run settftpfilelinux settftpfiledtb setnfspath "	\
+		"setbootargscommon setbootargsmtd setbootargsdhcp "	\
+			"setbootargsnfsrfs;"				\
+			"run loadtftpkernel loadtftpdtb;"		\
+			"bootm $memaddrlinux - $memaddrdtb\0"		\
+	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"		\
+			"run setubipartition setubirfs;"		\
+			"run setbootargscommon setbootargsmtd "		\
+				"setbootargsubirfs;"			\
+			"run loadtftpkernel loadtftpdtb;"		\
+			"bootm $memaddrlinux - $memaddrdtb\0"		\
+	"bootubi=run setubipartition setubirfs setubifilelinux "	\
+				"setubipfiledtb;"			\
+			"run setbootargscommon setbootargsmtd "		\
+				"setbootargsubirfs;"			\
+			"run ubipart ubimount loadubikernel loadubidtb;" \
+			"bootm $memaddrlinux - $memaddrdtb\0"		\
+	"bootubi_scr=run setubipartition setubirfs;"			\
+			"run ubipart ubimount;"				\
+			"if ubifsload ${memaddrsrc} boot/${boot_scr}; "	\
+			"then source ${memaddrsrc}; else run bootubi; fi\0" \
+	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "	\
+			"setbootargscommon setbootargsmmcrfs;"		\
+			"run loadmmckernel loadmmcdtb;"			\
+			"bootm $memaddrlinux - $memaddrdtb\0"		\
+	\
+	"bootcmd="CONFIG_BOOTCOMMAND"\0"
+
+#define CONFIG_COMMON_ENV_SETTINGS			CONFIG_COMMON_ENV_MISC \
+							CONFIG_COMMON_ENV_UBI
+#endif /* __PLATINUM_CONFIG_H__ */
diff --git a/include/configs/platinum_picon.h b/include/configs/platinum_picon.h
new file mode 100644
index 0000000000..4590df5a9e
--- /dev/null
+++ b/include/configs/platinum_picon.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PLATINUM_PICON_CONFIG_H__
+#define __PLATINUM_PICON_CONFIG_H__
+
+#define CONFIG_PLATINUM_PICON
+#define CONFIG_PLATINUM_BOARD			"Barco Picon"
+#define CONFIG_PLATINUM_PROJECT			"picon"
+#define CONFIG_PLATINUM_CPU			"imx6dl"
+
+#define CONFIG_MX6
+
+#include <configs/platinum.h>
+
+#define CONFIG_FEC_XCV_TYPE			RMII
+#define CONFIG_FEC_MXC_PHYADDR			0
+
+#define CONFIG_HOSTNAME				picon
+
+#define CONFIG_SYS_PROMPT			"picon > "
+
+#define CONFIG_PLATFORM_ENV_SETTINGS		"\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS		CONFIG_COMMON_ENV_SETTINGS \
+						CONFIG_PLATFORM_ENV_SETTINGS
+
+#endif /* __PLATINUM_PICON_CONFIG_H__ */
diff --git a/include/configs/platinum_titanium.h b/include/configs/platinum_titanium.h
new file mode 100644
index 0000000000..678965505f
--- /dev/null
+++ b/include/configs/platinum_titanium.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PLATINUM_TITANIUM_CONFIG_H__
+#define __PLATINUM_TITANIUM_CONFIG_H__
+
+#define CONFIG_PLATINUM_TITANIUM
+#define CONFIG_PLATINUM_BOARD			"Barco Titanium"
+#define CONFIG_PLATINUM_PROJECT			"titanium"
+#define CONFIG_PLATINUM_CPU			"imx6q"
+
+#define CONFIG_MX6
+
+#define PHYS_SDRAM_SIZE				(512 << 20)
+#define CONFIG_SYS_NAND_MAX_CHIPS		1
+
+#include <configs/platinum.h>
+
+#define CONFIG_FEC_XCV_TYPE			RGMII
+#define CONFIG_FEC_MXC_PHYADDR			4
+
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
+#define CONFIG_PHY_RESET_DELAY			1000
+
+#define CONFIG_HOSTNAME				titanium
+
+#define CONFIG_SYS_PROMPT			"titanium > "
+
+#define CONFIG_PLATFORM_ENV_SETTINGS		"\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS		CONFIG_COMMON_ENV_SETTINGS \
+						CONFIG_PLATFORM_ENV_SETTINGS
+
+#endif /* __PLATINUM_TITANIUM_CONFIG_H__ */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 809017c5fe..117d1f7087 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -175,7 +175,7 @@
 		"if i2c probe 0x10; then " \
 			"setenv bootargs ${bootargs} " \
 				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-					"if=RGB666; " \
+					"if=RGB666,bpp=32; " \
 			"if test 0 -eq ${nextcon}; then " \
 				"setenv fbmem fbmem=10M; " \
 			"else " \
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 11184893bf..d304658b9a 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -16,14 +16,34 @@ enum {
 
 	PFUZE100_SW1ABVOL	= 0x20,
 	PFUZE100_SW1ABSTBY	= 0x21,
+	PFUZE100_SW1ABOFF	= 0x22,
+	PFUZE100_SW1ABMODE	= 0x23,
 	PUZE_100_SW1ABCONF	= 0x24,
 	PFUZE100_SW1CVOL	= 0x2e,
 	PFUZE100_SW1CSTBY	= 0x2f,
+	PFUZE100_SW1COFF	= 0x30,
+	PFUZE100_SW1CMODE	= 0x31,
 	PFUZE100_SW1CCONF	= 0x32,
 	PFUZE100_SW2VOL		= 0x35,
+	PFUZE100_SW2STBY	= 0x36,
+	PFUZE100_SW2OFF		= 0x37,
+	PFUZE100_SW2MODE	= 0x38,
+	PFUZE100_SW2CONF	= 0x39,
 	PFUZE100_SW3AVOL	= 0x3c,
+	PFUZE100_SW3ASTBY	= 0x3D,
+	PFUZE100_SW3AOFF	= 0x3E,
+	PFUZE100_SW3AMODE	= 0x3F,
+	PFUZE100_SW3ACONF	= 0x40,
 	PFUZE100_SW3BVOL	= 0x43,
+	PFUZE100_SW3BSTBY	= 0x44,
+	PFUZE100_SW3BOFF	= 0x45,
+	PFUZE100_SW3BMODE	= 0x46,
+	PFUZE100_SW3BCONF	= 0x47,
 	PFUZE100_SW4VOL		= 0x4a,
+	PFUZE100_SW4STBY	= 0x4b,
+	PFUZE100_SW4OFF		= 0x4c,
+	PFUZE100_SW4MODE	= 0x4d,
+	PFUZE100_SW4CONF	= 0x4e,
 	PFUZE100_SWBSTCON1	= 0x66,
 	PFUZE100_VREFDDRCON	= 0x6a,
 	PFUZE100_VSNVSVOL	= 0x6b,
@@ -41,6 +61,8 @@ enum {
  * Buck Regulators
  */
 
+#define PFUZE100_SW1ABC_SETP(x)	((x - 3000) / 250)
+
 /* SW1A/B/C Output Voltage Configuration */
 #define SW1x_0_300V 0
 #define SW1x_0_325V 1
@@ -177,5 +199,38 @@ enum {
 #define SWBST_MODE_AUTO	(2 << 2)
 #define SWBST_MODE_APS	(2 << 3)
 
+/*
+ * Regulator Mode Control
+ *
+ * OFF: The regulator is switched off and the output voltage is discharged.
+ * PFM: In this mode, the regulator is always in PFM mode, which is useful
+ *      at light loads for optimized efficiency.
+ * PWM: In this mode, the regulator is always in PWM mode operation
+ *	regardless of load conditions.
+ * APS: In this mode, the regulator moves automatically between pulse
+ *	skipping mode and PWM mode depending on load conditions.
+ *
+ * SWxMODE[3:0]
+ * Normal Mode  |  Standby Mode	|      value
+ *   OFF		OFF		0x0
+ *   PWM		OFF		0x1
+ *   PFM		OFF		0x3
+ *   APS		OFF		0x4
+ *   PWM		PWM		0x5
+ *   PWM		APS		0x6
+ *   APS		APS		0x8
+ *   APS		PFM		0xc
+ *   PWM		PFM		0xd
+ */
+#define OFF_OFF		0x0
+#define PWM_OFF		0x1
+#define PFM_OFF		0x3
+#define APS_OFF		0x4
+#define PWM_PWM		0x5
+#define PWM_APS		0x6
+#define APS_APS		0x8
+#define APS_PFM		0xc
+#define PWM_PFM		0xd
+
 int power_pfuze100_init(unsigned char bus);
 #endif
diff --git a/include/splash.h b/include/splash.h
index 89ee7b22ec..a60e895423 100644
--- a/include/splash.h
+++ b/include/splash.h
@@ -22,7 +22,18 @@
 #ifndef _SPLASH_H_
 #define _SPLASH_H_
 
+enum splash_storage {
+	SPLASH_STORAGE_NAND,
+	SPLASH_STORAGE_SF,
+};
 
+struct splash_location {
+	char *name;
+	enum splash_storage storage;
+	u32 offset;	/* offset from start of storage */
+};
+
+int splash_source_load(struct splash_location *locations, uint size);
 int splash_screen_prepare(void);
 
 #ifdef CONFIG_SPLASH_SCREEN_ALIGN