* Code cleanup (ARM mostly)

* Patch by Curt Brune, 17 May 2004:
  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
  - Add support for ESPD-Inc. EVB4510 Board

6 files changed, 403 insertions, 240 deletions

diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 0ad5481fd2..58eab4e550 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -33,51 +33,7 @@
 #include <common.h>
 #include <command.h>
 #include <clps7111.h>
-
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1(void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-	/* printf("p15/c1 is = %08lx\n", value); */
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1(unsigned long value)
-{
-	/* printf("write %08lx to p15/c1\n", value); */
-	__asm__ __volatile__(
-		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* copro seems to need some delay between reading and writing */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1<<0)	/* mmu off/on */
-#define C1_ALIGN	(1<<1)	/* alignment faults off/on */
-#define C1_IDC		(1<<2)	/* icache and/or dcache off/on */
-#define C1_WRITE_BUFFER	(1<<3)	/* write buffer off/on */
-#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)	/* system protection */
-#define C1_ROM_PROT	(1<<9)	/* ROM protection */
-#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
+#include <asm/hardware.h>
 
 int cpu_init (void)
 {
@@ -103,12 +59,11 @@ int cleanup_before_linux (void)
 	 * and we set the CPU-speed to 73 MHz - see start.S for details
 	 */
 
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
 	unsigned long i;
 
 	disable_interrupts ();
-#ifdef CONFIG_NETARM
-	return 0;
-#endif
+
 	/* turn off I-cache */
 	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
 	i &= ~0x1000;
@@ -116,11 +71,16 @@ int cleanup_before_linux (void)
 
 	/* flush I-cache */
 	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-
 #ifdef CONFIG_ARM7_REVD
 	/* go to high speed */
 	IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73;
 #endif
+#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B)
+	disable_interrupts ();
+	/* Nothing more needed */
+#else
+#error No cleanup_before_linux() defined for this CPU type
+#endif
 	return 0;
 }
 
@@ -134,6 +94,57 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return (0);
 }
 
+/*
+ * Instruction and Data cache enable and disable functions
+ *
+ */
+
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1(void)
+{
+	unsigned long value;
+
+	__asm__ __volatile__(
+		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
+	/* printf("p15/c1 is = %08lx\n", value); */
+	return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1(unsigned long value)
+{
+	/* printf("write %08lx to p15/c1\n", value); */
+	__asm__ __volatile__(
+		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
+		:
+		: "r" (value)
+		: "memory");
+
+	read_p15_c1();
+}
+
+static void cp_delay (void)
+{
+	volatile int i;
+
+	/* copro seems to need some delay between reading and writing */
+	for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU		(1<<0)	/* mmu off/on */
+#define C1_ALIGN	(1<<1)	/* alignment faults off/on */
+#define C1_IDC		(1<<2)	/* icache and/or dcache off/on */
+#define C1_WRITE_BUFFER	(1<<3)	/* write buffer off/on */
+#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
+#define C1_SYS_PROT	(1<<8)	/* system protection */
+#define C1_ROM_PROT	(1<<9)	/* ROM protection */
+#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
+
 void icache_enable (void)
 {
 	ulong reg;
@@ -179,3 +190,65 @@ int dcache_status (void)
 {
 	return (read_p15_c1 () & C1_IDC) != 0;
 }
+
+#elif defined(CONFIG_S3C4510B)
+
+void icache_enable (void)
+{
+	s32 i;
+
+	/* disable all cache bits */
+	CLR_REG( REG_SYSCFG, 0x3F);
+
+	/* 8KB cache, write enable */
+	SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01);
+
+	/* clear TAG RAM bits */
+	for ( i = 0; i < 256; i++)
+	  PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000);
+
+	/* clear SET0 RAM */
+	for(i=0; i < 1024; i++)
+	  PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000);
+
+	/* clear SET1 RAM */
+	for(i=0; i < 1024; i++)
+	  PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000);
+
+	/* enable cache */
+	SET_REG( REG_SYSCFG, CACHE_ENABLE);
+
+}
+
+void icache_disable (void)
+{
+	/* disable all cache bits */
+	CLR_REG( REG_SYSCFG, 0x3F);
+}
+
+int icache_status (void)
+{
+	return GET_REG( REG_SYSCFG) & CACHE_ENABLE;
+}
+
+void dcache_enable (void)
+{
+	/* we don't have seperate instruction/data caches */
+	icache_enable();
+}
+
+void dcache_disable (void)
+{
+	/* we don't have seperate instruction/data caches */
+	icache_disable();
+}
+
+int dcache_status (void)
+{
+	/* we don't have seperate instruction/data caches */
+	return icache_status();
+}
+
+#else
+#error No icache/dcache enable/disable functions defined for this CPU type
+#endif
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index 67e581ad21..485443f63c 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -28,11 +28,8 @@
 
 #include <common.h>
 #include <clps7111.h>
-
 #include <asm/proc-armv/ptrace.h>
-#ifdef CONFIG_NETARM
-#include <asm/arch/netarm_registers.h>
-#endif
+#include <asm/hardware.h>
 
 extern void reset_cpu(ulong addr);
 
@@ -187,7 +184,8 @@ static ulong lastdec;
 
 int interrupt_init (void)
 {
-#ifdef CONFIG_NETARM
+
+#if defined(CONFIG_NETARM)
 	/* disable all interrupts */
 	IRQEN = 0;
 
@@ -198,7 +196,7 @@ int interrupt_init (void)
 
 	/* set timer 2 counter */
 	lastdec = TIMER_LOAD_VAL;
-#else
+#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
 	/* disable all interrupts */
 	IO_INTMR1 = 0;
 
@@ -210,6 +208,11 @@ int interrupt_init (void)
 
 	/* set timer 1 counter */
 	lastdec = IO_TC1D = TIMER_LOAD_VAL;
+#elif defined(CONFIG_S3C4510B)
+	/* Nothing to do, interrupts not supported */
+	lastdec = 0;
+#else
+#error No interrupt_init() defined for this CPU type
 #endif
 	timestamp = 0;
 
@@ -220,6 +223,9 @@ int interrupt_init (void)
  * timer without interrupts
  */
 
+
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
+
 void reset_timer (void)
 {
 	reset_timer_masked ();
@@ -285,3 +291,45 @@ void udelay_masked (unsigned long usec)
 	while (get_timer_masked () < tmo)
 		/*NOP*/;
 }
+
+#elif defined(CONFIG_S3C4510B)
+
+#define TMR_OFFSET (0x1000)
+
+void udelay (unsigned long usec)
+{
+	u32 rDATA;
+
+	rDATA = t_data_us(usec);
+
+	/* Stop timer 0 */
+	CLR_REG( REG_TMOD, TM0_RUN);
+
+	/* Configure for toggle mode */
+	SET_REG( REG_TMOD, TM0_TOGGLE);
+
+	/* Load Timer data register with count down value plus offset */
+	PUT_REG( REG_TDATA0, rDATA + TMR_OFFSET);
+
+	/* Clear timer counter register */
+	PUT_REG( REG_TCNT0, 0x0);
+
+	/* Start timer -- count down timer */
+	SET_REG( REG_TMOD, TM0_RUN);
+
+	/* spin during count down */
+	while ( GET_REG( REG_TCNT0) > TMR_OFFSET);
+
+	/* Stop timer */
+	CLR_REG( REG_TMOD, TM0_RUN);
+
+}
+
+ulong get_timer (ulong base)
+{
+	return (0xFFFFFFFF - GET_REG( REG_TCNT1)) - base;
+}
+
+#else
+#error Timer routines not defined for this CPU type
+#endif
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index 5c6a0cc555..a5da4b76b6 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2004
  * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
  *
  * (C) Copyright 2002
@@ -29,9 +29,10 @@
  */
 
 #include <common.h>
-#include <clps7111.h>
 
-#ifndef CONFIG_NETARM
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
+
+#include <clps7111.h>
 
 void serial_setbrg (void)
 {
@@ -39,20 +40,15 @@ void serial_setbrg (void)
 
 	unsigned int reg = 0;
 
-	if (gd->baudrate == 1200)
-		reg = 191;
-	else if (gd->baudrate == 9600)
-		reg = 23;
-	else if (gd->baudrate == 19200)
-		reg = 11;
-	else if (gd->baudrate == 38400)
-		reg = 5;
-	else if (gd->baudrate == 57600)
-		reg = 3;
-	else if (gd->baudrate == 115200)
-		reg = 1;
-	else
-		hang ();
+	switch (gd->baudrate) {
+	case   1200:	reg = 191;	break;
+	case   9600:	reg =  23;	break;
+	case  19200:	reg =  11;	break;
+	case  38400:	reg =   5;	break;
+	case  57600:	reg =   3;	break;
+	case 115200:	reg =   1;	break;
+	default:	hang ();	break;
+	}
 
 	/* init serial serial 1,2 */
 	IO_SYSCON1 = SYSCON1_UART1EN;
@@ -127,4 +123,4 @@ serial_puts (const char *s)
 	}
 }
 
-#endif /* CONFIG_NETARM */
+#endif /* defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) */
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
index 8cfe049b03..56cdb0a751 100644
--- a/cpu/arm720t/serial_netarm.c
+++ b/cpu/arm720t/serial_netarm.c
@@ -29,10 +29,11 @@
  */
 
 #include <common.h>
-#include <asm/arch/netarm_registers.h>
 
 #ifdef CONFIG_NETARM
 
+#include <asm/hardware.h>
+
 #define PORTA	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
 #define PORTB	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
 
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index f6ae9d67a4..15b9a0590e 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -26,9 +26,7 @@
 
 #include <config.h>
 #include <version.h>
-#ifdef CONFIG_NETARM
-#include <asm/arch/netarm_registers.h>
-#endif
+#include <asm/hardware.h>
 
 /*
  *************************************************************************
@@ -166,7 +164,6 @@ clbss_l:str	r2, [r0]		/* clear loop...                    */
 
 _start_armboot:	.word start_armboot
 
-
 /*
  *************************************************************************
  *
@@ -178,6 +175,7 @@ _start_armboot:	.word start_armboot
  *************************************************************************
  */
 
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
 
 /* Interupt-Controller base addresses */
 INTMR1:		.word	0x80000280 @ 32 bit size
@@ -195,8 +193,11 @@ SYSCON3:	.word	0x80002200
 #define CLKCTL_49      0x4  /* 49.152 MHz */
 #define CLKCTL_73      0x6  /* 73.728 MHz */
 
+#endif
+
 cpu_init_crit:
-#ifndef CONFIG_NETARM
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
+
 	/*
 	 * mask all IRQs by clearing all bits in the INTMRs
 	 */
@@ -223,7 +224,7 @@ cpu_init_crit:
 	bic	r0, r0, #0x0000008f	@ clear bits 7, 3:0 (B--- WCAM)
 	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
 	mcr	p15,0,r0,c1,c0
-#else /* CONFIG_NETARM */
+#elif defined(CONFIG_NETARM)
 	/*
 	 * prior to software reset : need to set pin PORTC4 to be *HRESET
 	 */
@@ -270,7 +271,26 @@ cpu_init_crit:
 	mov	r1, #0
 	ldr	r0, =NETARM_GEN_MODULE_BASE
 	str	r1, [r0, #+NETARM_GEN_INTR_ENABLE]
-#endif /* CONFIG_NETARM */
+
+#elif defined(CONFIG_S3C4510B)
+
+	/*
+	 * Mask off all IRQ sources
+	 */
+	ldr	r1, =REG_INTMASK
+	ldr	r0, =0x3FFFFF
+	str	r0, [r1]
+
+	/*
+	 * Disable Cache
+	 */
+	ldr r0, =REG_SYSCFG
+	ldr r1, =0x83ffffa0     /* cache-disabled  */
+	str r1, [r0]
+
+#else
+#error No cpu_init_crit() defined for current CPU type
+#endif
 
 #ifdef CONFIG_ARM7_REVD
 	/* set clock speed */
@@ -462,10 +482,10 @@ fiq:
 
 #endif
 
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
 	.align	5
 .globl reset_cpu
 reset_cpu:
-#ifndef CONFIG_NETARM
 	mov     ip, #0
 	mcr     p15, 0, ip, c7, c7, 0           @ invalidate cache
 	mcr     p15, 0, ip, c8, c7, 0           @ flush TLB (v4)
@@ -474,7 +494,10 @@ reset_cpu:
 	bic     ip, ip, #0x2100                 @ ..v....s........
 	mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
 	mov     pc, r0
-#else
+#elif defined(CONFIG_NETARM)
+	.align	5
+.globl reset_cpu
+reset_cpu:
 	ldr	r1, =NETARM_MEM_MODULE_BASE
 	ldr	r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
 	ldr	r1, =0xFFFFF000
@@ -491,4 +514,9 @@ reset_cpu:
 	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
 	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
 	mov	pc, r0
+#elif defined(CONFIG_S3C4510B)
+/* Nothing done here as reseting the CPU is board specific, depending
+ * on external peripherals such as watchdog timers, etc. */
+#else
+#error No reset_cpu() defined for current CPU type
 #endif
diff --git a/cpu/mpc824x/cpu_init.c b/cpu/mpc824x/cpu_init.c
index 3b5fb79219..08f5c4ab13 100644
--- a/cpu/mpc824x/cpu_init.c
+++ b/cpu/mpc824x/cpu_init.c
@@ -75,63 +75,80 @@ cpu_init_f (void)
  */
 
 #define M_CONFIG_WRITE_HALFWORD( addr, data ) \
-    __asm__ __volatile__(     \
-      "                       \
-      stw  %2,0(%0)\n         \
-      sync\n                  \
-      sth  %3,2(%1)\n         \
-      sync\n                  \
-      "                       \
-      : /* no output */       \
-      : "r" (CONFIG_ADDR), "r" (CONFIG_DATA),                 \
-	"r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16))   \
-      );
-
-    M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000);
+	__asm__ __volatile__("		\
+		stw  %2,0(%0)\n		\
+		sync\n			\
+		sth  %3,2(%1)\n		\
+		sync\n			\
+		"			\
+		: /* no output */	\
+		: "r" (CONFIG_ADDR), "r" (CONFIG_DATA),			\
+		"r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16))	\
+	);
+
+	M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000);
 #endif
 
-    CONFIG_WRITE_BYTE(PCLSR, 0x8);	/* set PCI cache line size */
+	CONFIG_WRITE_BYTE(PCLSR, 0x8);	/* set PCI cache line size */
+
+	/*
+	* Note that although this bit is cleared after a hard reset, it
+	* must be explicitly set and then cleared by software during
+	* initialization in order to guarantee correct operation of the
+	* DLL and the SDRAM_CLK[0:3] signals (if they are used).
+	*/
+	CONFIG_READ_BYTE (AMBOR, val);
+	CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
+	CONFIG_WRITE_BYTE(AMBOR, val | 0x20);
+	CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
+#ifdef CONFIG_MPC8245
+	/* silicon bug 28 MPC8245 */
+	CONFIG_READ_BYTE(AMBOR,val);
+	CONFIG_WRITE_BYTE(AMBOR,val|0x1);
+
+	CONFIG_READ_BYTE(PCMBCR,val);
+	/* in order not to corrupt data which is being read over the PCI bus
+	* with the PPC as master, we need to reduce the number of PCMRBs to 1,
+	* 4.11 in the  processor user manual
+	* */
 
-    /*
-     * Note that although this bit is cleared after a hard reset, it
-     * must be explicitly set and then cleared by software during
-     * initialization in order to guarantee correct operation of the
-     * DLL and the SDRAM_CLK[0:3] signals (if they are used).
-     */
-    CONFIG_READ_BYTE (AMBOR, val);
-    CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
-    CONFIG_WRITE_BYTE(AMBOR, val | 0x20);
-    CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
+#if 1
+	CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */
+#else
+	CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
+	CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
+#endif
+#endif
 
-    CONFIG_READ_WORD(PICR1, val);
+	CONFIG_READ_WORD(PICR1, val);
 #if defined(CONFIG_MPC8240)
-    CONFIG_WRITE_WORD( PICR1,
-       (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) |
-	       PIRC1_MSK | PICR1_PROC_TYPE_603E |
-	       PICR1_FLASH_WR_EN | PICR1_MCP_EN |
-	       PICR1_CF_DPARK | PICR1_EN_PCS |
-	       PICR1_CF_APARK );
+	CONFIG_WRITE_WORD( PICR1,
+		(val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) |
+		       PIRC1_MSK | PICR1_PROC_TYPE_603E |
+		       PICR1_FLASH_WR_EN | PICR1_MCP_EN |
+		       PICR1_CF_DPARK | PICR1_EN_PCS |
+		       PICR1_CF_APARK );
 #elif defined(CONFIG_MPC8245)
-    CONFIG_WRITE_WORD( PICR1,
-       (val & (PICR1_RCS0)) |
-	       PICR1_PROC_TYPE_603E |
-	       PICR1_FLASH_WR_EN | PICR1_MCP_EN |
-	       PICR1_CF_DPARK | PICR1_NO_BUSW_CK |
-	       PICR1_DEC| PICR1_CF_APARK | 0x10);	/* 8245 UM says bit 4 must be set */
+	CONFIG_WRITE_WORD( PICR1,
+		(val & (PICR1_RCS0)) |
+		       PICR1_PROC_TYPE_603E |
+		       PICR1_FLASH_WR_EN | PICR1_MCP_EN |
+		       PICR1_CF_DPARK | PICR1_NO_BUSW_CK |
+		       PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
 
-    CONFIG_READ_WORD(PICR2, val);
-    val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/
+	CONFIG_READ_WORD(PICR2, val);
+	val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/
 #ifndef CONFIG_PN62
-    val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/
+	val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/
 #endif
-    CONFIG_WRITE_WORD(PICR2, val);
+	CONFIG_WRITE_WORD(PICR2, val);
 
-    CONFIG_WRITE_WORD(EUMBBAR, CFG_EUMB_ADDR);
+	CONFIG_WRITE_WORD(EUMBBAR, CFG_EUMB_ADDR);
 #ifndef CFG_RAMBOOT
-    CONFIG_WRITE_WORD(MCCR1, (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) |
+	CONFIG_WRITE_WORD(MCCR1, (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) |
 				 (CFG_BANK0_ROW) |
 				 (CFG_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
 				 (CFG_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
@@ -140,26 +157,26 @@ cpu_init_f (void)
 				 (CFG_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
 				 (CFG_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
 				 (CFG_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
-			     (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT));
+				 (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT));
 #endif
 
 #if defined(CFG_ASRISE) && defined(CFG_ASFALL)
-    CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT |
-			     CFG_ASRISE << MCCR2_ASRISE_SHIFT |
-			     CFG_ASFALL << MCCR2_ASFALL_SHIFT);
+	CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT |
+				 CFG_ASRISE << MCCR2_ASRISE_SHIFT |
+				 CFG_ASFALL << MCCR2_ASFALL_SHIFT);
 #else
-    CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT);
+	CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT);
 #endif
 
 #if defined(CONFIG_MPC8240)
-    CONFIG_WRITE_WORD(MCCR3,
-	(((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
-	(CFG_REFREC << MCCR3_REFREC_SHIFT) |
-	(CFG_RDLAT  << MCCR3_RDLAT_SHIFT));
+	CONFIG_WRITE_WORD(MCCR3,
+		(((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
+		(CFG_REFREC << MCCR3_REFREC_SHIFT) |
+		(CFG_RDLAT  << MCCR3_RDLAT_SHIFT));
 #elif defined(CONFIG_MPC8245)
-    CONFIG_WRITE_WORD(MCCR3,
-	(((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
-	(CFG_REFREC << MCCR3_REFREC_SHIFT));
+	CONFIG_WRITE_WORD(MCCR3,
+		(((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
+		(CFG_REFREC << MCCR3_REFREC_SHIFT));
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
@@ -190,67 +207,67 @@ cpu_init_f (void)
 		  (CFG_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
 	(((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
 #elif defined(CONFIG_MPC8245)
-    CONFIG_READ_WORD(MCCR1, val);
-    val &= MCCR1_DBUS_SIZE0;    /* test for 64-bit mem bus */
+	CONFIG_READ_WORD(MCCR1, val);
+	val &= MCCR1_DBUS_SIZE0;    /* test for 64-bit mem bus */
 
-    CONFIG_WRITE_WORD(MCCR4,
-	(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) |
-	(CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
-	(CFG_EXTROM ? MCCR4_EXTROM : 0) |
-	(CFG_REGDIMM ? MCCR4_REGDIMM : 0) |
-	(CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
-	((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
-	(CFG_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
-	(((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) |
-	      (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT)  |
-	(CFG_ACTORW << MCCR4_ACTTORW_SHIFT) |
-	(((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
+	CONFIG_WRITE_WORD(MCCR4,
+		(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) |
+		(CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
+		(CFG_EXTROM ? MCCR4_EXTROM : 0) |
+		(CFG_REGDIMM ? MCCR4_REGDIMM : 0) |
+		(CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
+		((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
+		(CFG_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
+		(((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) |
+		      (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT)  |
+		(CFG_ACTORW << MCCR4_ACTTORW_SHIFT) |
+		(((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
 
-    CONFIG_WRITE_WORD(MSAR1,
-	( (CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
-	(((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
-	(((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
-	(((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
-    CONFIG_WRITE_WORD(EMSAR1,
-	( (CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
-	(((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
-	(((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
-	(((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
-    CONFIG_WRITE_WORD(MSAR2,
-	( (CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
-	(((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
-	(((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
-	(((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
-    CONFIG_WRITE_WORD(EMSAR2,
-	( (CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
-	(((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
-	(((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
-	(((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
-    CONFIG_WRITE_WORD(MEAR1,
-	( (CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
-	(((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
-	(((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
-	(((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
-    CONFIG_WRITE_WORD(EMEAR1,
-	( (CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
-	(((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
-	(((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
-	(((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
-    CONFIG_WRITE_WORD(MEAR2,
-	( (CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
-	(((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
-	(((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
-	(((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
-    CONFIG_WRITE_WORD(EMEAR2,
-	( (CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
-	(((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
-	(((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
-	(((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
-
-    CONFIG_WRITE_BYTE(ODCR, CFG_ODCR);
+	CONFIG_WRITE_WORD(MSAR1,
+		( (CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+		(((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+		(((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+		(((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+	CONFIG_WRITE_WORD(EMSAR1,
+		( (CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+		(((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+		(((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+		(((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+	CONFIG_WRITE_WORD(MSAR2,
+		( (CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+		(((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+		(((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+		(((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+	CONFIG_WRITE_WORD(EMSAR2,
+		( (CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+		(((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+		(((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+		(((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+	CONFIG_WRITE_WORD(MEAR1,
+		( (CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+		(((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+		(((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+		(((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+	CONFIG_WRITE_WORD(EMEAR1,
+		( (CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+		(((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+		(((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+		(((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+	CONFIG_WRITE_WORD(MEAR2,
+		( (CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+		(((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+		(((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+		(((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+	CONFIG_WRITE_WORD(EMEAR2,
+		( (CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+		(((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+		(((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+		(((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+
+	CONFIG_WRITE_BYTE(ODCR, CFG_ODCR);
 #ifdef CFG_DLL_MAX_DELAY
 	CONFIG_WRITE_BYTE(MIOCR1, CFG_DLL_MAX_DELAY);	/* needed to make DLL lock */
 #endif
@@ -261,31 +278,31 @@ cpu_init_f (void)
 	CONFIG_WRITE_BYTE(MIOCR2, CFG_SDRAM_DSCD);	/* change memory input */
 #endif /* setup & hold time */
 
-    CONFIG_WRITE_BYTE(MBER,
-	 CFG_BANK0_ENABLE |
-	(CFG_BANK1_ENABLE << 1) |
-	(CFG_BANK2_ENABLE << 2) |
-	(CFG_BANK3_ENABLE << 3) |
-	(CFG_BANK4_ENABLE << 4) |
-	(CFG_BANK5_ENABLE << 5) |
-	(CFG_BANK6_ENABLE << 6) |
-	(CFG_BANK7_ENABLE << 7));
+	CONFIG_WRITE_BYTE(MBER,
+		 CFG_BANK0_ENABLE |
+		(CFG_BANK1_ENABLE << 1) |
+		(CFG_BANK2_ENABLE << 2) |
+		(CFG_BANK3_ENABLE << 3) |
+		(CFG_BANK4_ENABLE << 4) |
+		(CFG_BANK5_ENABLE << 5) |
+		(CFG_BANK6_ENABLE << 6) |
+		(CFG_BANK7_ENABLE << 7));
 
 #ifdef CFG_PGMAX
-    CONFIG_WRITE_BYTE(MPMR, CFG_PGMAX);
+	CONFIG_WRITE_BYTE(MPMR, CFG_PGMAX);
 #endif
 
-    /* ! Wait 200us before initialize other registers */
-    /*FIXME: write a decent udelay wait */
-    __asm__ __volatile__(
-      " mtctr	%0 \n \
-       0: bdnz	 0b\n"
-      :
-      : "r" (0x10000));
+	/* ! Wait 200us before initialize other registers */
+	/*FIXME: write a decent udelay wait */
+	__asm__ __volatile__(
+		" mtctr	%0 \n \
+		0: bdnz	 0b\n"
+		:
+		: "r" (0x10000));
 
-   CONFIG_READ_WORD(MCCR1, val);
-   CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
-   __asm__ __volatile__("eieio");
+	CONFIG_READ_WORD(MCCR1, val);
+	CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
+	__asm__ __volatile__("eieio");
 
 #endif /* !CONFIG_MOUSSE && !CONFIG_BMW */
 }
@@ -293,32 +310,32 @@ cpu_init_f (void)
 
 #ifdef CONFIG_MOUSSE
 #ifdef INCLUDE_MPC107_REPORT
-struct MPC107_s{
-    unsigned int iobase;
-    char desc[120];
-} MPC107Regs[] ={
-    {BMC_BASE+0x0,  "MPC107 Vendor/Device ID"},
-    {BMC_BASE+0x4,  "MPC107 PCI Command/Status Register"},
-    {BMC_BASE+0x8,  "MPC107 Revision"},
-    {BMC_BASE+0xC,  "MPC107 Cache Line Size"},
-    {BMC_BASE+0x10, "MPC107 LMBAR"},
-    {BMC_BASE+0x14, "MPC824x PCSR"},
-    {BMC_BASE+0xA8, "MPC824x PICR1"},
-    {BMC_BASE+0xAC, "MPC824x PICR2"},
-    {BMC_BASE+0x46, "MPC824x PACR"},
-    {BMC_BASE+0x310, "MPC824x ITWR"},
-    {BMC_BASE+0x300, "MPC824x OMBAR"},
-    {BMC_BASE+0x308, "MPC824x OTWR"},
-    {BMC_BASE+0x14, "MPC107 Peripheral Control and Status Register"},
-    {BMC_BASE+0x78, "MPC107 EUMBAR"},
-    {BMC_BASE+0xC0, "MPC107 Processor Bus Error Status"},
-    {BMC_BASE+0xC4, "MPC107 PCI Bus Error Status"},
-    {BMC_BASE+0xC8, "MPC107 Processor/PCI Error Address"},
-    {BMC_BASE+0xE0, "MPC107 AMBOR Register"},
-    {BMC_BASE+0xF0, "MPC107 MCCR1 Register"},
-    {BMC_BASE+0xF4, "MPC107 MCCR2 Register"},
-    {BMC_BASE+0xF8, "MPC107 MCCR3 Register"},
-    {BMC_BASE+0xFC, "MPC107 MCCR4 Register"}
+struct MPC107_s {
+	unsigned int iobase;
+	char desc[120];
+} MPC107Regs[] = {
+	{ BMC_BASE +  0x00, "MPC107 Vendor/Device ID"		},
+	{ BMC_BASE +  0x04, "MPC107 PCI Command/Status Register" },
+	{ BMC_BASE +  0x08, "MPC107 Revision"			},
+	{ BMC_BASE +  0x0C, "MPC107 Cache Line Size"		},
+	{ BMC_BASE +  0x10, "MPC107 LMBAR"			},
+	{ BMC_BASE +  0x14, "MPC824x PCSR"			},
+	{ BMC_BASE +  0xA8, "MPC824x PICR1"			},
+	{ BMC_BASE +  0xAC, "MPC824x PICR2"			},
+	{ BMC_BASE +  0x46, "MPC824x PACR"			},
+	{ BMC_BASE + 0x310, "MPC824x ITWR"			},
+	{ BMC_BASE + 0x300, "MPC824x OMBAR"			},
+	{ BMC_BASE + 0x308, "MPC824x OTWR"			},
+	{ BMC_BASE +  0x14, "MPC107 Peripheral Control and Status Register" },
+	{ BMC_BASE + 0x78, "MPC107 EUMBAR"			},
+	{ BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status"	},
+	{ BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status"	},
+	{ BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address"	},
+	{ BMC_BASE + 0xE0, "MPC107 AMBOR Register"		},
+	{ BMC_BASE + 0xF0, "MPC107 MCCR1 Register"		},
+	{ BMC_BASE + 0xF4, "MPC107 MCCR2 Register"		},
+	{ BMC_BASE + 0xF8, "MPC107 MCCR3 Register"		},
+	{ BMC_BASE + 0xFC, "MPC107 MCCR4 Register"		},
 };
 #define N_MPC107_Regs	(sizeof(MPC107Regs)/sizeof(MPC107Regs[0]))
 #endif /* INCLUDE_MPC107_REPORT */