summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/tegra30-cardhu.dtsi
AgeCommit message (Collapse)Author
2015-01-09ARM: tegra: Update isl29028 compatible string to use isil vendor prefixArnaud Ebalard
"isil" and "isl" prefixes are used at various locations inside the kernel to reference Intersil corporation. This patch is part of a series fixing those locations were "isl" is used in compatible strings to use the now expected "isil" prefix instead (NASDAQ symbol for Intersil and most used version). Note: isl29028 is an I2C device so the patch does not in fact currently depend on the introduction of "isil"-based compatible string in isl29028 driver because I2C core does not check the prefix yet. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-09Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "The DT branch adds a lot of new stuff for additional SoC and board support. The branch is the largest one and contains 513 out of the total 972 non-merge arm-soc changesets for 3.19. Most of the changes are about enabling additional on-chip devices for existing machines, but there are also an unusual number of new SoC types being added this time: - AMLogic Meson8 - ARM Realview in DT mode - Allwinner A80 - Broadcom BCM47081 - Broadcom Cygnus - Freescale LS1021A - Freescale Vybrid 500 series - Mediatek MT6592, MT8127, MT8135 - STMicroelectronics STiH410 - Samsung Exynos4415 The level of support for the above differs widely, some are just stubs with nothing more than CPU, memory and a UART, but others are fairly complete. As usual, these get extended over time. There are also many new boards getting added, this is the list of model strings that are showing up in new dts files: - ARM RealView PB1176 - Altera SOCFPGA Arria 10 - Asus RT-N18U (BCM47081) - Buffalo WZR-1750DHP (BCM4708) - Buffalo WZR-600DHP2 (BCM47081) - Cygnus Enterprise Phone (BCM911360_ENTPHN) - D-Link DIR-665 - Google Spring - IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) - IGEPv2 Rev. F (TI OMAP AM/DM37x) - LS1021A QDS Board - LS1021A TWR Board - LeMaker Banana Pi - MarsBoard RK3066 - MediaTek MT8127 Moose Board - MediaTek MT8135 evaluation board - Mele M3 - Merrii A80 Optimus Board - Netgear R6300 V2 (BCM4708) - Nomadik STN8815NHK - NovaTech OrionLXm - Olimex A20-OLinuXino-LIME2 - Raspberry Pi Model B+ - STiH410 B2120 - Samsung Monk board - Samsung Rinato board - Synology DS213j - Synology DS414 - TBS2910 Matrix ARM mini PC - TI AM5728 BeagleBoard-X15 - Toradex Colibri VF50 on Colibri Evaluation Board - Zynq ZYBO Development Board Other notable changes include: - exynos: cleanup of existing dts files - mvebu: improved pinctrl support for Armada 370/XP - nomadik: restructuring dts files - omap: added CAN bus support - shmobile: added clock support for some SoCs - shmobile: added sound support for some SoCs - sirf: reset controller support - sunxi: continuing the relicensing under dual GPL/MIT - sunxi: lots of new on-chip device support - sunxi: working simplefb support (long awaited) - various: provide stdout-path property for earlycon" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (510 commits) ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured Revert "ARM: dts: rockchip: temporarily disable smp on rk3288" ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 ARM: BCM5301X: Add DT for Asus RT-N18U ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP ARM: BCM5301X: Add DT for Netgear R6300 V2 ARM: BCM5301X: Add buttons for Netgear R6250 ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file arm: dts: zynq: Add Digilent ZYBO board arm: dts: zynq: Move crystal freq. to board level doc: dt: vendor-prefixes: Add Digilent Inc Documentation: devicetree: Fix Xilinx VDMA specification ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188 ARM: dts: rockchip: add label property for leds on Radxa Rock ARM: BCM5301X: Add LEDs for Netgear R6250 V1 ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file ARM: dts: add sysreg phandle to i2c device nodes for exynos ARM: dts: Remove unused bootargs from exynos3250-rinato ARM: dts: add board dts file for Exynos3250-based Monk board ...
2014-11-20arch: arm: boot: dts: Correct vendor-prefix for iio device isl29028 in ↵Darshana Padmadas
compatible property This patch corrects the vendor-prefix for isl29028 in the compatible property from "isil,isl29028" to "isl,isl29028" according to listed vendor-prefixes in Documentation/devicetree/bindings/vendor-prefixes.txt. Incorrect vendor-prefix "isl" was reported by checkpatch.pl warning for drivers/staging/iio/light/isl29028.c. Thus incorrect vendor-prefix "isil" was corrected for every mention of device isl29028. Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-13ARM: dts: tegra: move serial aliases to per-boardOlof Johansson
There are general changes pending to make the /aliases/serial* entries number the serial ports on the system. On Tegra, so far the ports have been just numbered dynamically as they are configured so that makes them change. To avoid this, add specific aliases per board to keep the old numbers. This allows us to change the numbering by default on future SoCs while keeping the numbering on existing boards. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-18ARM: tegra: Remove legacy PCIe power supply propertiesThierry Reding
These properties are deprecated and no longer of any use. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-16ARM: tegra: Add new PCIe regulator propertiesThierry Reding
These new properties more accurately reflect the real connections of the boards and therefore make it easier to match them up with schematics. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20Merge tag 'tegra-for-3.15-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: device tree changes for 3.15" from Stephen Warren: This enables: - host1x and eDP support on Tegra124. - LCD panel support for a few Tegra20 devices and Venice2. - Enables power down, SPI flash, and USB on Venice2. - Documents which Dalmore revision is supported. - Adds an I2C bus mux to Cardhu. Additionally, Tegra124 is converted to use #address-cells=<2> since the HW suports more than 32-bits of address space, and various cleanups are included. * tag 'tegra-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (21 commits) ARM: dts: tegra: add PCIe interrupt mapping properties ARM: tegra: use 2 address cells for Tegra124 DT ARM: tegra: Rename as3722 node to pmic ARM: tegra: Fix whitespace around '=' ARM: tegra: Enable USB on Venice2 ARM: tegra: Add Tegra124 USB support ARM: tegra: Enable eDP for Venice2 ARM: tegra: Add Tegra124 eDP support ARM: tegra: Add Tegra124 host1x support ARM: tegra: Hook up SDMMC3 power-supply on Venice2 ARM: tegra: Overhaul Venice2 regulators ARM: tegra: Combine VBUS enable pins into one node ARM: tegra: Use "disabled" for status property ARM: tegra: add SPI flash to Venice2 DT ARM: tegra: enable PCA9546 on Cardhu ARM: tegra: enable LCD panel on Ventana ARM: tegra: enable LCD panel on Seaboard ARM: tegra: add system-power-controller property for PMIC node ARM: tegra: document which Dalmore revisions are supported ARM: tegra: Properly sort clocks property ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-19ARM: tegra: enable PCA9546 on CardhuBryan Wu
Cardhu has a PCA9546 for I2C bus extension, which connects to 3 cameras. It's required for Tegra V4L2 soc camera driver and camera sensor drivers. Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-18ARM: tegra: fix RTC0 alias for CardhuStephen Warren
This alias entry was evidently cut/paste from a different board, and not correctly updated to match Cardhu. Fix this. Fixes: 553c0a200e20 ("ARM: tegra: set up /aliases entries for RTCs") Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-19ARM: tegra: Enable LVDS on CardhuThierry Reding
Add backlight and panel nodes for the Cardhu 10.1" WXGA TFT LCD panel. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-18ARM: tegra: set up /aliases entries for RTCsStephen Warren
This ensures that the PMIC RTC provides the system time, rather than the on-SoC RTC, which is not battery-backed. tegra124-venice2.dts isn't touched yet since we haven't added any off- SoC RTC device to its device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl definesLaxman Dewangan
Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: fix node sort orderStephen Warren
For Tegra DT files, I've been attempting to keep the nodes sorted in the order: 1) Nodes with reg, in order of reg. 2) Nodes without reg, alphabetically. This patch fixes a few escapees that I missed:-( The diffs look larger than they really are, because sometimes when one node was moved up or down, diff chose to represent this as many other nodes being moved the other way! Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: add missing unit addresses to DTStephen Warren
DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-07ARM: tegra: add vcc supply for nct1008 to CardhuWei Ni
Add vcc-supply property in the nct1008 node, and set it as sys_3v3_reg. change the name of this node to temp-sensor. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-13ARM: tegra: add USB DT entries for Tegra30Tuomas Tynkkynen
Add device tree entries for the 3 USB controllers and PHYs and enable the third controller on Cardhu and Beaver boards. Fix VBUS regulator entries on Beaver. The GPIO pins were wrong. Also, internal pullups need to be enabled on those pins. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12ARM: tegra: Enable PCIe controller on CardhuJay Agarwal
Root port 2 is routed to the bottom connector on Cardhu and is used by the development dock to provide gigabit ethernet and USB functionality. Signed-off-by: Jay Agarwal <jagarwal@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12ARM: tegra: enable LP1 suspend modeJoseph Lo
Enabling the LP1 suspend mode for Tegra devices. Tested-by: Marc Dietrich <marvin24@gmx.de> # paz00 board Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-15ARM: tegra: fix DT node ordering in Tegra30 CardhuStephen Warren
Nodes should be sorted by reg. Fix location of the tps62361 node. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-15ARM: tegra: add DT entry for nct1008 to CardhuWei Ni
Enable thermal sensor nct1008 for Tegra30 Cardhu. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-28ARM: tegra30: convert device tree files to use CLK definesHiroshi Doyu
Use the Tegra30 CAR binding header (tegra30-car.h) to replace magic numbers in the device tree. For example, - clocks = <&tegra_car 28>; + clocks = <&tegra_car CLK_HOST1X>; Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, updated since tegra30-car.h moved for consistency] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-28ARM: tegra: convert device tree files to use IRQ definesStephen Warren
Use the GIC and standard IRQ binding defines in all IRQ specifiers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-28ARM: tegra: convert device tree files to use GPIO definesStephen Warren
Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-28ARM: tegra: use #include for all device treesStephen Warren
Replace /include/ (dtc) with #include (C pre-processor) for all Tegra DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as the IDs and flags in GPIO specifiers. Use of those features will increase the readability of the device tree files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04ARM: dts: tegra: add the PM configurations of PMCJoseph Lo
Adding the PM configuration of PMC when the platform support suspend function. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04ARM: tegra: add non-removable and keep-power-in-suspend property for MMCJoseph Lo
This patch adds "non-removable" property of MMC host where the eMMC device is for Tegra platform. And the "keep-power-in-suspend" property was used for the SDIO device that need this to go into suspend mode (e.g. BRCM43xx series). Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04ARM: tegra: add clocks property to sound nodesStephen Warren
Audio-related clocks need to be represented in the device tree. Update bindings to describe which clocks are needed, and DT files to include those clocks. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03ARM: tegra: add clock source of PMC to device treesJoseph Lo
Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-11ARM: dts: tegra: fix the activate polarity of cd-gpio in mmc hostJoseph Lo
The GPIO pin of SD slot card detection should active low. Signed-off-by: Joseph Lo <josephl@nvidia.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsiStephen Warren
No Tegra30 Platform is running PLL_P at another rate than 408MHz, nor is any using any other PLL as UART source clock. Move attribute into SoC level dtsi file to slim down board DT files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: cardhu: register UARTCLaxman Dewangan
UARTC is used for the interfacing with bluetooth device. Register this UART channel as high speed serial channel so that it can use the APB DMA for data transfer. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: dts: cardhu: enable SLINK4Laxman Dewangan
Enable SLINK4 and connected device in Tegra30 based platform Cardhu. Setting maximum spi frequency to 25MHz. SPI serial flash is connected on CS1 of SLINK4 on cardhu platform. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: swapped reg/compatible order to be consistent] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: dt: t30 cardhu: set pinmux and power for wlanWei Ni
Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05ARM: tegra: update *.dts for regulator-compatible deprecationStephen Warren
Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-11ARM: dt: tegra: configure power off for some boardsStephen Warren
For Seaboard, Ventana, and Cardhu, add DT property to tell the regulator that it should provide the pm_power_off() implementation. This allows "shutdown" to work. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-06ARM: tegra: cardhu: add dt entry for fixed regulatorsLaxman Dewangan
Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-06ARM: dt: tegra: cardhu: split dts file for support multiple board versionsLaxman Dewangan
There is multiple version of cardhu starting from A01 to A07. Cardhu A01 and A03 are not supported. Cardhu A02 will have different sets of GPIOs for fixed regulator compare to cardhu A04. The Cardhu A05, A06, A07 are compatibe with A04. Based on cardhu version, the related dts file need to be chosen like for cardhu A02, use tegra30-cardhu-a02.dts, cardhu A04 and more, use tegra30-cardhu-a04.dts. This patch create the DTS file A02 and A04 and convert tegra30-cardhu.dts as dts include file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-02 06:09:04 +0000