summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos5250-arndale.dts
AgeCommit message (Collapse)Author
2014-10-21ARM: dts: Simplify USB3503 on exynos5250-arndaleAndreas Faerber
There's no need for a simple-bus, place the smsc,usb3503a directly into the root node. That's what we're going to do on exynos5250-spring. Reported-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-10-21ARM: dts: Fix apparent GPIO typo in exynos5250-arndaleAndreas Faerber
The GPIO flag 2 has no constant assigned, so this was probably active-low. Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-10-21ARM: dts: Clean up exynos5250-arndaleAndreas Faerber
Use the new style of referencing inherited nodes, use symbolic names, tidy indentation and reorder includes. Goal is the alignment of all exynos5250 based device trees for comparison. Signed-off-by: Andreas Faerber <afaerber@suse.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> [kgene.kim@samsung.com: rebased] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-14ARM: dts: remove old USB2 PHY node hook for exynos5250-arndaleBartlomiej Zolnierkiewicz
drivers/usb/phy/phy-samsung-usb2 driver got replaced by drivers/phy/phy-samsung-usb2 one. Remove the leftover hook from Arndale dts file. Cc: Mark Brown <broonie@linaro.org> Cc: Kamil Debski <k.debski@samsung.com> Cc: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Vivek Gautam <gautam.vivek@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-08-18ARM: dts: unuse the slot-node and deprecate the supports-highspeed for ↵Jaehoon Chung
dw-mmc in exynos dw-mmc controller can support multiple slots. But, there are no use-cases anywhere. So we don't need to support the slot-node for dw-mmc controller. And "supports-highspeed" property in dw-mmc is deprecated. "supports-highspeed" property can be replaced with "cap-sd/mmc-highspeed". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Tushar Behera <trblinux@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Sachin Kamat <sachin.kamat@samsung.com> [kgene.kim@samsung.com: rebased exynos5250-snow changes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-06-02Merge tag 'dt-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC devicetree updates from Olof Johansson: "As with previous release, this continues to be among the largest branches we merge, with lots of new contents. New things for this release are among other things: - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request) - Qualcomm APQ8064 and APQ8084 SoCs and eval boards - Nvidia Jetson TK1 development board (Tegra T124-based) Two new SoCs that didn't need enough new platform code to stand out enough for me to notice when writing the SoC tag, but that adds new DT contents are: - TI DRA72 - Marvell Berlin 2Q" * tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits) ARM: dts: add secure firmware support for exynos5420-arndale-octa ARM: dts: add pmu sysreg node to exynos3250 ARM: dts: correct the usb phy node in exynos5800-peach-pi ARM: dts: correct the usb phy node in exynos5420-peach-pit ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 ARM: dts: add dts files for exynos3250 SoC ARM: dts: add mfc node for exynos5800 ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi ARM: dts: enable fimd for exynos5800-peach-pi ARM: dts: enable display controller for exynos5800-peach-pi ARM: dts: enable hdmi for exynos5800-peach-pi ARM: dts: add dts file for exynos5800-peach-pi board ARM: dts: add dts file for exynos5800 SoC ARM: dts: add dts file for exynos5260-xyref5260 board ARM: dts: add dts files for exynos5260 SoC ARM: dts: update watchdog node name in exynos5440 ARM: dts: use key code macros on Origen and Arndale boards ARM: dts: enable RTC and WDT nodes on Origen boards ARM: dts: qcom: Add APQ8084-MTP board support ARM: dts: qcom: Add APQ8084 SoC support ...
2014-05-31ARM: dts: use key code macros on Origen and Arndale boardsSachin Kamat
Key code macros improve readability on exnos4210-origen, exynos4412-origen and exynos5250-arndale boards. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: squashed similar two patches] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-20ARM: dts: Keep LDO4 always ON for exynos5250-arndale boardSachin Kamat
LDO4 regulator was getting disabled preventing the system from going into low power states. Keep it always on to fix it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-04-05Merge tag 'tags/cleanup2-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-03-29Merge tag 'exynos-cleanup' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup3 Merge "Exynos cleanup for v3.15" from Kukjin Kim: - reorganize code for - add support reserve memory for mfc-v7 - consolidate exynos4 and exynos5 machine codes - add generic compatible strings for exynos4 and exynos5 - update DT with generic compatible strings - move clk related dt-binding header file in dt-bindings/clock * tag 'exynos-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Update Exynos DT files with generic compatible strings ARM: EXYNOS: Add generic compatible strings ARM: EXYNOS: Consolidate exynos4 and exynos5 machine files ARM: EXYNOS: Consolidate CPU init code ARM: SAMSUNG: Introduce generic Exynos4 and 5 helpers ARM: EXYNOS: Add support to reserve memory for MFC-v7 ARM: SAMSUNG: Reorganize calls to reserve memory for MFC Conflicts: arch/arm/mach-exynos/exynos.c Signed-off-by; Arnd Bergmann <arnd@arndb.de>
2014-03-21ARM: dts: Update Exynos DT files with generic compatible stringsSachin Kamat
Add generic compatible strings to the respective board DT files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-03-18ARM: dts: enable ahci sata and sata phy for exynos5250Yuvaraj Kumar C D
This patch adds dt entry for ahci sata controller and its corresponding phy controller.phy node has been added w.r.t new generic phy framework. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-24ARM: dts: Re-organize RTC status for exynos5250Sachin Kamat
Some boards might not have RTC xtal, so RTC shouldn't really be enabled by default. Enable it in the required board files. For now enable it for all board files to maintain the enabled status exisitng prior to this patch. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-14ARM: dts: Keep G3D regulator always on for exynos5250-arndaleTomasz Figa
Apparently, if G3D regulator is powered off, the SoC cannot enter low power modes and just hangs. This patch fixes this by keeping the regulator always on when the system is running, as suggested by Exynos 4 User's Manual in case of Exynos4210/4x12 SoCs (Exynos5250 UM does not have such note, but observed behavior seems to confirm that it is true for this SoC as well). This fixes an issue preventing Arndale board from entering sleep mode observed since commit 346f372f7b72a0 clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock that landed in kernel 3.10, which has fixed the clock driver to make the SoC actually try to enter the sleep mode. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <stable@vger.kernel.org> [v3.10+] Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-21ARM: dts: Disable I2C controllers by default on Exynos5250Mark Brown
Ensure that unused I2C controllers are not activated, causing problems due to inappropriate pinmuxing or similar, by marking the controllers as disabled by default and requiring boards to explicitly enable those that are in use. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-21ARM: dts: Leave Exynos5250 SPI controller disabled by defaultMark Brown
Rather than requiring each board to explicitly disable the SPI controllers it is not using instead require boards to enable those that they are using. This is less work overall since normally at most one of the controllers is in use and avoids issues caused by inappropriate pinmuxing. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-21Merge branch 'v3.14-next/fixes-samsung-2' into v3.14-next/dt-exynos-2Kukjin Kim
2013-12-16ARM: dts: Update min voltage for vdd_arm on ArndaleSachin Kamat
The minimum recommended ARM voltage for Exynos5250 at 200MHz on Arndale board is 0.9125V. Update accordingly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-16ARM: dts: rename mmc dts node for exynos5 seriesYuvaraj Kumar C D
This patch rename's the device tree mmc node's from "dwmmc" to "mmc". According to ePAPR chapter 2.2.2 generic node name recommendation, it has been opted change from dwmmc to mmc.Also this patch remove the instance index from the node name. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-16ARM: dts: Move fifo-depth property from exynos5250 board dtsYuvaraj Kumar C D
As fifo-depth property in dw_mmc device tree node is SOC specific, move this property to exynos5250 SOC specific file. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> [kgene.kim@samsung.com: squashed fifo-depth patch for cros5250-common] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-16ARM: dts: change status property of dwmmc nodes for exynos5250Yuvaraj Kumar C D
According to ePAPR, chapter 2.3.4, the status property has defined that it should be set to "disabled" when "the device is not presently operational, but it might become operational in the future". So this patch disable dwmmc node by "status = disabled" in SOC dts file and enable dwmmc node by "status = okay" in board specific dts file. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-12ARM: dts: Add missing op_mode property to PMIC on ArndaleSachin Kamat
Though the default value is 1, add it explicitly to avoid unnecessary boot warnings and for consistency. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-08ARM: dts: Add HDMI related I2C nodes for Arndale boardSachin Kamat
Updated I2C nodes for HDMI-DDC and HDMI-PHY for Arndale board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-07ARM: dts: Disable Exynos5250 I2S controllers by defaultMark Brown
Rather than requiring each board to explicitly disable the I2S controllers it is not using instead require boards to enable those that they are using. This is required for audio operation on Arndale, one of the unused I2S controllers is pinmuxed with the LDO enable GPIOs for the WM1811A. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-06ARM: dts: Add reg property to regulator nodes in exynos5250-arndaleSachin Kamat
For consistency and correctness, since this is a bus, even if not physical, it is worth to add 'reg' property and unit-address to subnodes. The 'reg' property would merely be an index. Also for consistency, use "regulator" as node name as used most commonly across other dts files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-26ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoCVikas Sajjan
Moves the RTC DT node's "status" property from exynos5250 board (arndale & snow) dts files to exynos5250.dtsi, since the bindings in exynos5250.dtsi depicts the RTC h/w completely. Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-26ARM: dts: Fix the RTC DT node name for Exynos5250Vikas Sajjan
Fixes the RTC DT node name for Exynos5250 as per the DT node naming convention. Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Hook up internal PHY on ArndaleMark Brown
While the Linux driver stack is capable of figuring this out for itself document the fact that we really do use the internal PHY even with the directly wired hub on the board to save anyone else having to work this out for themselves. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Enable USB hub on ArndaleMark Brown
The Arndale has a SMSC USB3503 connected in hardware only mode like a PHY, support it using the usb-nop-xceiv binding. Note that due to a regrettable decision to use a regulator to represent the reset signal this uses a fixed voltage regulator to do that, there is a plan to use the reset controller binding once that is merged so it does not seem worthwhile to fix the usb-nop-xceiv driver at this point. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Update DP controller DT Node for Exynos5 based SoCsVikas Sajjan
Moves the properties of DP controller to exynos5.dtsi which are common across exynos5 SoCs like Exynos5250 and Exynos5420. The PHY DP Node is based on Jingoo Han's <jg1.han@samsung.com> patch at https://patchwork.linuxtv.org/patch/19189/ Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Update FIMD DT node for Exynos5 SoCsVikas Sajjan
Moves the properties of FIMD DT node which are common across Exynos5 based SoCs like Exynos5250 and Exynos5420 to exynos5.dtsi Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24ARM: dts: Add WM1811A audio CODEC to Arndale bindingsMark Brown
The default audio module for the Arndale has a WM1811A on it. Add this to the device tree bindings. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24ARM: dts: Hook up supplies for Arndale S5M8767Mark Brown
As part of this add nodes for the main wall supply as well as bucks 7 and 8 which are used to drop that down for several of the LDOs. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24ARM: dts: Put Arndale fixed voltage regulators on a simple-busMark Brown
Fixed voltage regulators (and other similar free standing things) are supposed to go on a simple-bus for DT correctness reasons. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24ARM: dts: Hook up IRQ for PMIC on ArndaleMark Brown
The out of tree code configures a pullup on the line indicating that it is an active low interrupt. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: use #include for all device trees for SamsungPadmavathi Venna
Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18ARM: dts: Enable RTC node for ArndaleTushar Behera
The issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based Arndale board. Hence re-enabling RTC support for Arndale board. This is helpful for testing S2R on Arndale board. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-10ARM: dts: Add display timing node to exynos5250-arndale.dtsVikas Sajjan
Adds display timing node for a DP panel to Arndale Board DTS file Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-10ARM: dts: Add DT node for DP controller for Arndale BoardVikas Sajjan
Add DT node for DP controller to exynos5250 based Arndale Board Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add HDMI HPD and regulator node for Arndale boardSachin Kamat
Added HDMI hot plug and regulator nodes to Arndale DT file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add MFC codec support for Arndale boardSachin Kamat
Added MFC codec node to Arndale DT file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add vmmc regulator support for Arndale boardSachin Kamat
Added vmmc regulator node to Arndale DT file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add PMIC node entry for Arndale boardAmit Daniel Kachhap
Added S5M8767 PMIC DT nodes for Arndale board. Only the used LDO's/BUCK are defined here. Also the nodes describe the default/reset state LDO's and no power mangement tuning is implemented. The usage desription can be found in s5m8767 device tree binding documentation. Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add gpio-button entries for Arndale boardTushar Behera
Added GPIO buttons DT node to Arndale board file. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add disable-wp for card slot on exynos5250-arndaleSachin Kamat
This is required to keep the existing functionality of having no write protect pin on Arndale board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add pin-control related changes for Arndale boardTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: dts: add board specific fixed rate clock nodes for Exynos based platformsThomas Abraham
The clock frequency of xxti and xusbxti clocks is dependent on the frequency of the on-board oscillator that is used to generate these clocks. So allow the frequency of these clocks to be specfied from device tree. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add initial board support file for exynos5250-arndaleGirish K S
Arndale is a low cost board based on the Samsung Exynos5250 SoC. This patch adds initial device tree support for this board. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-07 17:27:05 +0000