diff options
| author | Mark Brown <broonie@linaro.org> | 2013-08-19 04:33:22 +0900 |
|---|---|---|
| committer | Kukjin Kim <kgene.kim@samsung.com> | 2013-08-19 04:33:22 +0900 |
| commit | 7c1b0ec52969e6e2fb5676dfc74eb2770bc4c7b2 (patch) | |
| tree | 45fdd44c76c1f1d78b427bca8b407c2a66129e41 /arch/arm/boot/dts/exynos5250-arndale.dts | |
| parent | e3e03f99a17ce6e923e7b121fc23448683bfbebb (diff) | |
ARM: dts: Enable USB hub on Arndale
The Arndale has a SMSC USB3503 connected in hardware only mode like a PHY,
support it using the usb-nop-xceiv binding.
Note that due to a regrettable decision to use a regulator to represent
the reset signal this uses a fixed voltage regulator to do that, there
is a plan to use the reset controller binding once that is merged so it
does not seem worthwhile to fix the usb-nop-xceiv driver at this point.
Signed-off-by: Mark Brown <broonie@linaro.org>
Tested-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Diffstat (limited to 'arch/arm/boot/dts/exynos5250-arndale.dts')
| -rw-r--r-- | arch/arm/boot/dts/exynos5250-arndale.dts | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index ca430206c3e8..3e4589bd4515 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -541,4 +541,18 @@ rtc { status = "okay"; }; + + usb_hub_bus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb_hub { + compatible = "smsc,usb3503a"; + + reset-gpios = <&gpx3 5 1>; + connect-gpios = <&gpd1 7 1>; + }; + }; }; |