diff options
Diffstat (limited to 'drivers/net/phy/broadcom.c')
| -rw-r--r-- | drivers/net/phy/broadcom.c | 122 |
1 files changed, 0 insertions, 122 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 34088d60da74..854f2c9a7b2b 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -25,132 +25,10 @@ #define BRCM_PHY_REV(phydev) \ ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask)) -/* - * Broadcom LED source encodings. These are used in BCM5461, BCM5481, - * BCM5482, and possibly some others. - */ -#define BCM_LED_SRC_LINKSPD1 0x0 -#define BCM_LED_SRC_LINKSPD2 0x1 -#define BCM_LED_SRC_XMITLED 0x2 -#define BCM_LED_SRC_ACTIVITYLED 0x3 -#define BCM_LED_SRC_FDXLED 0x4 -#define BCM_LED_SRC_SLAVE 0x5 -#define BCM_LED_SRC_INTR 0x6 -#define BCM_LED_SRC_QUALITY 0x7 -#define BCM_LED_SRC_RCVLED 0x8 -#define BCM_LED_SRC_MULTICOLOR1 0xa -#define BCM_LED_SRC_OPENSHORT 0xb -#define BCM_LED_SRC_OFF 0xe /* Tied high */ -#define BCM_LED_SRC_ON 0xf /* Tied low */ - - -/* - * BCM5482: Shadow registers - * Shadow values go into bits [14:10] of register 0x1c to select a shadow - * register to access. - */ -/* 00101: Spare Control Register 3 */ -#define BCM54XX_SHD_SCR3 0x05 -#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 -#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 -#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 - -/* 01010: Auto Power-Down */ -#define BCM54XX_SHD_APD 0x0a -#define BCM54XX_SHD_APD_EN 0x0020 - -#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ - /* LED3 / ~LINKSPD[2] selector */ -#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) - /* LED1 / ~LINKSPD[1] selector */ -#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) -#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */ -#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ -#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ -#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ -#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */ -#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ - - -/* - * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) - */ -#define MII_BCM54XX_EXP_AADJ1CH0 0x001f -#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200 -#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100 -#define MII_BCM54XX_EXP_AADJ1CH3 0x601f -#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002 -#define MII_BCM54XX_EXP_EXP08 0x0F08 -#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 -#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 -#define MII_BCM54XX_EXP_EXP75 0x0f75 -#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c -#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001 -#define MII_BCM54XX_EXP_EXP96 0x0f96 -#define MII_BCM54XX_EXP_EXP96_MYST 0x0010 -#define MII_BCM54XX_EXP_EXP97 0x0f97 -#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c - -/* - * BCM5482: Secondary SerDes registers - */ -#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ -#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */ -#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */ -#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ -#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ - - -/*****************************************************************************/ -/* Fast Ethernet Transceiver definitions. */ -/*****************************************************************************/ - -#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */ -#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */ -#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */ -#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */ -#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */ -#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */ - -#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */ -#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */ - - -/*** Shadow register definitions ***/ - -#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */ -#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */ - -#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */ -#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003 -#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001 - -#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */ -#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */ - - MODULE_DESCRIPTION("Broadcom PHY driver"); MODULE_AUTHOR("Maciej W. Rozycki"); MODULE_LICENSE("GPL"); -/* - * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T - * 0x1c shadow registers. - */ -static int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow) -{ - phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow)); - return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD)); -} - -static int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, u16 val) -{ - return phy_write(phydev, MII_BCM54XX_SHD, - MII_BCM54XX_SHD_WRITE | - MII_BCM54XX_SHD_VAL(shadow) | - MII_BCM54XX_SHD_DATA(val)); -} - /* Indirect register access functions for the Expansion Registers */ static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum) { |