summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h178
1 files changed, 177 insertions, 1 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 2beb5430b876..b0779d773343 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -2182,6 +2182,45 @@
#define NIG_REG_P0_HWPFC_ENABLE 0x18078
#define NIG_REG_P0_LLH_FUNC_MEM2 0x18480
#define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE 0x18440
+/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. Bits [15:0] return the sequence ID of the packet. Bit 16
+ * indicates the validity of the data in the buffer. Writing a 1 to bit 16
+ * will clear the buffer.
+ */
+#define NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID 0x1875c
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. This location returns the lower 32 bits of timestamp value.
+ */
+#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB 0x18754
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. This location returns the upper 32 bits of timestamp value.
+ */
+#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB 0x18758
+/* [RW 11] Mask register for the various parameters used in determining PTP
+ * packet presence. Set each bit to 1 to mask out the particular parameter.
+ * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
+ * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
+ * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
+ * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
+ * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
+ * MAC DA 2. The reset default is set to mask out all parameters.
+ */
+#define NIG_REG_P0_LLH_PTP_PARAM_MASK 0x187a0
+/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
+ * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
+ * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
+ * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
+ * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
+ * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
+ * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
+ * default is to mask out all of the rules. Note that rules 0-3 are for IPv4
+ * packets only and require that the packet is IPv4 for the rules to match.
+ * Note that rules 4-7 are for IPv6 packets only and require that the packet
+ * is IPv6 for the rules to match.
+ */
+#define NIG_REG_P0_LLH_PTP_RULE_MASK 0x187a4
+/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */
+#define NIG_REG_P0_LLH_PTP_TO_HOST 0x187ac
/* [RW 1] Input enable for RX MAC interface. */
#define NIG_REG_P0_MAC_IN_EN 0x185ac
/* [RW 1] Output enable for TX MAC interface */
@@ -2194,6 +2233,17 @@
* priority field is extracted from the outer-most VLAN in receive packet.
* Only COS 0 and COS 1 are supported in E2. */
#define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054
+/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits
+ * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables
+ * V1 frame format in timesync event detection on RX side. Bit 2 enables V2
+ * frame format in timesync event detection on RX side. Bit 3 enables
+ * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event
+ * detection on TX side. Bit 5 enables V2 frame format in timesync event
+ * detection on TX side. Note that for HW to detect PTP packet and extract
+ * data from the packet, at least one of the version bits of that traffic
+ * direction has to be enabled.
+ */
+#define NIG_REG_P0_PTP_EN 0x18788
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
* priority is mapped to COS 0 when the corresponding mask bit is 1. More
* than one bit may be set; allowing multiple priorities to be mapped to one
@@ -2300,7 +2350,46 @@
* Ethernet header. */
#define NIG_REG_P1_HDRS_AFTER_BASIC 0x1818c
#define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0
-#define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460
+#define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460a
+/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. Bits [15:0] return the sequence ID of the packet. Bit 16
+ * indicates the validity of the data in the buffer. Writing a 1 to bit 16
+ * will clear the buffer.
+ */
+#define NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID 0x18774
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. This location returns the lower 32 bits of timestamp value.
+ */
+#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB 0x1876c
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. This location returns the upper 32 bits of timestamp value.
+ */
+#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB 0x18770
+/* [RW 11] Mask register for the various parameters used in determining PTP
+ * packet presence. Set each bit to 1 to mask out the particular parameter.
+ * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
+ * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
+ * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
+ * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
+ * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
+ * MAC DA 2. The reset default is set to mask out all parameters.
+ */
+#define NIG_REG_P1_LLH_PTP_PARAM_MASK 0x187c8
+/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
+ * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
+ * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
+ * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
+ * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
+ * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
+ * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
+ * default is to mask out all of the rules. Note that rules 0-3 are for IPv4
+ * packets only and require that the packet is IPv4 for the rules to match.
+ * Note that rules 4-7 are for IPv6 packets only and require that the packet
+ * is IPv6 for the rules to match.
+ */
+#define NIG_REG_P1_LLH_PTP_RULE_MASK 0x187cc
+/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */
+#define NIG_REG_P1_LLH_PTP_TO_HOST 0x187d4
/* [RW 32] Specify the client number to be assigned to each priority of the
* strict priority arbiter. This register specifies bits 31:0 of the 36-bit
* value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
@@ -2342,6 +2431,17 @@
* priority field is extracted from the outer-most VLAN in receive packet.
* Only COS 0 and COS 1 are supported in E2. */
#define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8
+/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits
+ * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables
+ * V1 frame format in timesync event detection on RX side. Bit 2 enables V2
+ * frame format in timesync event detection on RX side. Bit 3 enables
+ * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event
+ * detection on TX side. Bit 5 enables V2 frame format in timesync event
+ * detection on TX side. Note that for HW to detect PTP packet and extract
+ * data from the packet, at least one of the version bits of that traffic
+ * direction has to be enabled.
+ */
+#define NIG_REG_P1_PTP_EN 0x187b0
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
* priority is mapped to COS 0 when the corresponding mask bit is 1. More
* than one bit may be set; allowing multiple priorities to be mapped to one
@@ -2361,6 +2461,78 @@
#define NIG_REG_P1_RX_MACFIFO_EMPTY 0x1858c
/* [R 1] TLLH FIFO is empty. */
#define NIG_REG_P1_TLLH_FIFO_EMPTY 0x18338
+/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16
+ * indicates the validity of the data in the buffer. Bit 17 indicates that
+ * the sequence ID is valid and it is waiting for the TX timestamp value.
+ * Bit 18 indicates whether the timestamp is from a SW request (value of 1)
+ * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer.
+ */
+#define NIG_REG_P0_TLLH_PTP_BUF_SEQID 0x187e0
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * MCP. This location returns the lower 32 bits of timestamp value.
+ */
+#define NIG_REG_P0_TLLH_PTP_BUF_TS_LSB 0x187d8
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * MCP. This location returns the upper 32 bits of timestamp value.
+ */
+#define NIG_REG_P0_TLLH_PTP_BUF_TS_MSB 0x187dc
+/* [RW 11] Mask register for the various parameters used in determining PTP
+ * packet presence. Set each bit to 1 to mask out the particular parameter.
+ * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
+ * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
+ * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
+ * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
+ * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
+ * MAC DA 2. The reset default is set to mask out all parameters.
+ */
+#define NIG_REG_P0_TLLH_PTP_PARAM_MASK 0x187f0
+/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
+ * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
+ * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
+ * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
+ * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
+ * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
+ * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
+ * default is to mask out all of the rules.
+ */
+#define NIG_REG_P0_TLLH_PTP_RULE_MASK 0x187f4
+/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16
+ * indicates the validity of the data in the buffer. Bit 17 indicates that
+ * the sequence ID is valid and it is waiting for the TX timestamp value.
+ * Bit 18 indicates whether the timestamp is from a SW request (value of 1)
+ * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer.
+ */
+#define NIG_REG_P1_TLLH_PTP_BUF_SEQID 0x187ec
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * MCP. This location returns the lower 32 bits of timestamp value.
+ */
+#define NIG_REG_P1_TLLH_PTP_BUF_TS_LSB 0x187e4
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * MCP. This location returns the upper 32 bits of timestamp value.
+ */
+#define NIG_REG_P1_TLLH_PTP_BUF_TS_MSB 0x187e8
+/* [RW 11] Mask register for the various parameters used in determining PTP
+ * packet presence. Set each bit to 1 to mask out the particular parameter.
+ * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
+ * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
+ * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
+ * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
+ * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
+ * MAC DA 2. The reset default is set to mask out all parameters.
+ */
+#define NIG_REG_P1_TLLH_PTP_PARAM_MASK 0x187f8
+/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
+ * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
+ * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
+ * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
+ * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
+ * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
+ * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
+ * default is to mask out all of the rules.
+ */
+#define NIG_REG_P1_TLLH_PTP_RULE_MASK 0x187fc
/* [RW 32] Specify which of the credit registers the client is to be mapped
* to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are
* for client 0; bits [35:32] are for client 8. For clients that are not
@@ -2513,6 +2685,10 @@
swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
ort swap is equal to ~nig_registers_port_swap.port_swap */
#define NIG_REG_STRAP_OVERRIDE 0x10398
+/* [WB 64] Addresses for TimeSync related registers in the timesync
+ * generator sub-module.
+ */
+#define NIG_REG_TIMESYNC_GEN_REG 0x18800
/* [RW 1] output enable for RX_XCM0 IF */
#define NIG_REG_XCM0_OUT_EN 0x100f0
/* [RW 1] output enable for RX_XCM1 IF */