diff options
Diffstat (limited to 'drivers/net/dsa/bcm_sf2.c')
| -rw-r--r-- | drivers/net/dsa/bcm_sf2.c | 887 |
1 files changed, 887 insertions, 0 deletions
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c new file mode 100644 index 000000000000..b9625968daac --- /dev/null +++ b/drivers/net/dsa/bcm_sf2.c @@ -0,0 +1,887 @@ +/* + * Broadcom Starfighter 2 DSA switch driver + * + * Copyright (C) 2014, Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/list.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <linux/mii.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <net/dsa.h> +#include <linux/ethtool.h> + +#include "bcm_sf2.h" +#include "bcm_sf2_regs.h" + +/* String, offset, and register size in bytes if different from 4 bytes */ +static const struct bcm_sf2_hw_stats bcm_sf2_mib[] = { + { "TxOctets", 0x000, 8 }, + { "TxDropPkts", 0x020 }, + { "TxQPKTQ0", 0x030 }, + { "TxBroadcastPkts", 0x040 }, + { "TxMulticastPkts", 0x050 }, + { "TxUnicastPKts", 0x060 }, + { "TxCollisions", 0x070 }, + { "TxSingleCollision", 0x080 }, + { "TxMultipleCollision", 0x090 }, + { "TxDeferredCollision", 0x0a0 }, + { "TxLateCollision", 0x0b0 }, + { "TxExcessiveCollision", 0x0c0 }, + { "TxFrameInDisc", 0x0d0 }, + { "TxPausePkts", 0x0e0 }, + { "TxQPKTQ1", 0x0f0 }, + { "TxQPKTQ2", 0x100 }, + { "TxQPKTQ3", 0x110 }, + { "TxQPKTQ4", 0x120 }, + { "TxQPKTQ5", 0x130 }, + { "RxOctets", 0x140, 8 }, + { "RxUndersizePkts", 0x160 }, + { "RxPausePkts", 0x170 }, + { "RxPkts64Octets", 0x180 }, + { "RxPkts65to127Octets", 0x190 }, + { "RxPkts128to255Octets", 0x1a0 }, + { "RxPkts256to511Octets", 0x1b0 }, + { "RxPkts512to1023Octets", 0x1c0 }, + { "RxPkts1024toMaxPktsOctets", 0x1d0 }, + { "RxOversizePkts", 0x1e0 }, + { "RxJabbers", 0x1f0 }, + { "RxAlignmentErrors", 0x200 }, + { "RxFCSErrors", 0x210 }, + { "RxGoodOctets", 0x220, 8 }, + { "RxDropPkts", 0x240 }, + { "RxUnicastPkts", 0x250 }, + { "RxMulticastPkts", 0x260 }, + { "RxBroadcastPkts", 0x270 }, + { "RxSAChanges", 0x280 }, + { "RxFragments", 0x290 }, + { "RxJumboPkt", 0x2a0 }, + { "RxSymblErr", 0x2b0 }, + { "InRangeErrCount", 0x2c0 }, + { "OutRangeErrCount", 0x2d0 }, + { "EEELpiEvent", 0x2e0 }, + { "EEELpiDuration", 0x2f0 }, + { "RxDiscard", 0x300, 8 }, + { "TxQPKTQ6", 0x320 }, + { "TxQPKTQ7", 0x330 }, + { "TxPkts64Octets", 0x340 }, + { "TxPkts65to127Octets", 0x350 }, + { "TxPkts128to255Octets", 0x360 }, + { "TxPkts256to511Ocets", 0x370 }, + { "TxPkts512to1023Ocets", 0x380 }, + { "TxPkts1024toMaxPktOcets", 0x390 }, +}; + +#define BCM_SF2_STATS_SIZE ARRAY_SIZE(bcm_sf2_mib) + +static void bcm_sf2_sw_get_strings(struct dsa_switch *ds, + int port, uint8_t *data) +{ + unsigned int i; + + for (i = 0; i < BCM_SF2_STATS_SIZE; i++) + memcpy(data + i * ETH_GSTRING_LEN, + bcm_sf2_mib[i].string, ETH_GSTRING_LEN); +} + +static void bcm_sf2_sw_get_ethtool_stats(struct dsa_switch *ds, + int port, uint64_t *data) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + const struct bcm_sf2_hw_stats *s; + unsigned int i; + u64 val = 0; + u32 offset; + + mutex_lock(&priv->stats_mutex); + + /* Now fetch the per-port counters */ + for (i = 0; i < BCM_SF2_STATS_SIZE; i++) { + s = &bcm_sf2_mib[i]; + + /* Do a latched 64-bit read if needed */ + offset = s->reg + CORE_P_MIB_OFFSET(port); + if (s->sizeof_stat == 8) + val = core_readq(priv, offset); + else + val = core_readl(priv, offset); + + data[i] = (u64)val; + } + + mutex_unlock(&priv->stats_mutex); +} + +static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds) +{ + return BCM_SF2_STATS_SIZE; +} + +static char *bcm_sf2_sw_probe(struct device *host_dev, int sw_addr) +{ + return "Broadcom Starfighter 2"; +} + +static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + unsigned int i; + u32 reg; + + /* Enable the IMP Port to be in the same VLAN as the other ports + * on a per-port basis such that we only have Port i and IMP in + * the same VLAN. + */ + for (i = 0; i < priv->hw_params.num_ports; i++) { + if (!((1 << i) & ds->phys_port_mask)) + continue; + + reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i)); + reg |= (1 << cpu_port); + core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i)); + } +} + +static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 reg, val; + + /* Enable the port memories */ + reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL); + reg &= ~P_TXQ_PSM_VDD(port); + core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); + + /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ + reg = core_readl(priv, CORE_IMP_CTL); + reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN); + reg &= ~(RX_DIS | TX_DIS); + core_writel(priv, reg, CORE_IMP_CTL); + + /* Enable forwarding */ + core_writel(priv, SW_FWDG_EN, CORE_SWMODE); + + /* Enable IMP port in dumb mode */ + reg = core_readl(priv, CORE_SWITCH_CTRL); + reg |= MII_DUMB_FWDG_EN; + core_writel(priv, reg, CORE_SWITCH_CTRL); + + /* Resolve which bit controls the Broadcom tag */ + switch (port) { + case 8: + val = BRCM_HDR_EN_P8; + break; + case 7: + val = BRCM_HDR_EN_P7; + break; + case 5: + val = BRCM_HDR_EN_P5; + break; + default: + val = 0; + break; + } + + /* Enable Broadcom tags for IMP port */ + reg = core_readl(priv, CORE_BRCM_HDR_CTRL); + reg |= val; + core_writel(priv, reg, CORE_BRCM_HDR_CTRL); + + /* Enable reception Broadcom tag for CPU TX (switch RX) to + * allow us to tag outgoing frames + */ + reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS); + reg &= ~(1 << port); + core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS); + + /* Enable transmission of Broadcom tags from the switch (CPU RX) to + * allow delivering frames to the per-port net_devices + */ + reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS); + reg &= ~(1 << port); + core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS); + + /* Force link status for IMP port */ + reg = core_readl(priv, CORE_STS_OVERRIDE_IMP); + reg |= (MII_SW_OR | LINK_STS); + core_writel(priv, reg, CORE_STS_OVERRIDE_IMP); +} + +static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 reg; + + reg = core_readl(priv, CORE_EEE_EN_CTRL); + if (enable) + reg |= 1 << port; + else + reg &= ~(1 << port); + core_writel(priv, reg, CORE_EEE_EN_CTRL); +} + +static int bcm_sf2_port_setup(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + s8 cpu_port = ds->dst[ds->index].cpu_port; + u32 reg; + + /* Clear the memory power down */ + reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL); + reg &= ~P_TXQ_PSM_VDD(port); + core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); + + /* Clear the Rx and Tx disable bits and set to no spanning tree */ + core_writel(priv, 0, CORE_G_PCTL_PORT(port)); + + /* Enable port 7 interrupts to get notified */ + if (port == 7) + intrl2_1_mask_clear(priv, P_IRQ_MASK(P7_IRQ_OFF)); + + /* Set this port, and only this one to be in the default VLAN */ + reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port)); + reg &= ~PORT_VLAN_CTRL_MASK; + reg |= (1 << port); + core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port)); + + bcm_sf2_imp_vlan_setup(ds, cpu_port); + + /* If EEE was enabled, restore it */ + if (priv->port_sts[port].eee.eee_enabled) + bcm_sf2_eee_enable_set(ds, port, true); + + return 0; +} + +static void bcm_sf2_port_disable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 off, reg; + + if (priv->wol_ports_mask & (1 << port)) + return; + + if (port == 7) { + intrl2_1_mask_set(priv, P_IRQ_MASK(P7_IRQ_OFF)); + intrl2_1_writel(priv, P_IRQ_MASK(P7_IRQ_OFF), INTRL2_CPU_CLEAR); + } + + if (dsa_is_cpu_port(ds, port)) + off = CORE_IMP_CTL; + else + off = CORE_G_PCTL_PORT(port); + + reg = core_readl(priv, off); + reg |= RX_DIS | TX_DIS; + core_writel(priv, reg, off); + + /* Power down the port memory */ + reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL); + reg |= P_TXQ_PSM_VDD(port); + core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); +} + +/* Returns 0 if EEE was not enabled, or 1 otherwise + */ +static int bcm_sf2_eee_init(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + struct ethtool_eee *p = &priv->port_sts[port].eee; + int ret; + + p->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full); + + ret = phy_init_eee(phy, 0); + if (ret) + return 0; + + bcm_sf2_eee_enable_set(ds, port, true); + + return 1; +} + +static int bcm_sf2_sw_get_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + struct ethtool_eee *p = &priv->port_sts[port].eee; + u32 reg; + + reg = core_readl(priv, CORE_EEE_LPI_INDICATE); + e->eee_enabled = p->eee_enabled; + e->eee_active = !!(reg & (1 << port)); + + return 0; +} + +static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port, + struct phy_device *phydev, + struct ethtool_eee *e) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + struct ethtool_eee *p = &priv->port_sts[port].eee; + + p->eee_enabled = e->eee_enabled; + + if (!p->eee_enabled) { + bcm_sf2_eee_enable_set(ds, port, false); + } else { + p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev); + if (!p->eee_enabled) + return -EOPNOTSUPP; + } + + return 0; +} + +static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id) +{ + struct bcm_sf2_priv *priv = dev_id; + + priv->irq0_stat = intrl2_0_readl(priv, INTRL2_CPU_STATUS) & + ~priv->irq0_mask; + intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR); + + return IRQ_HANDLED; +} + +static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id) +{ + struct bcm_sf2_priv *priv = dev_id; + + priv->irq1_stat = intrl2_1_readl(priv, INTRL2_CPU_STATUS) & + ~priv->irq1_mask; + intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR); + + if (priv->irq1_stat & P_LINK_UP_IRQ(P7_IRQ_OFF)) + priv->port_sts[7].link = 1; + if (priv->irq1_stat & P_LINK_DOWN_IRQ(P7_IRQ_OFF)) + priv->port_sts[7].link = 0; + + return IRQ_HANDLED; +} + +static int bcm_sf2_sw_setup(struct dsa_switch *ds) +{ + const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME; + struct bcm_sf2_priv *priv = ds_to_priv(ds); + struct device_node *dn; + void __iomem **base; + unsigned int port; + unsigned int i; + u32 reg, rev; + int ret; + + spin_lock_init(&priv->indir_lock); + mutex_init(&priv->stats_mutex); + + /* All the interesting properties are at the parent device_node + * level + */ + dn = ds->pd->of_node->parent; + + priv->irq0 = irq_of_parse_and_map(dn, 0); + priv->irq1 = irq_of_parse_and_map(dn, 1); + + base = &priv->core; + for (i = 0; i < BCM_SF2_REGS_NUM; i++) { + *base = of_iomap(dn, i); + if (*base == NULL) { + pr_err("unable to find register: %s\n", reg_names[i]); + return -ENODEV; + } + base++; + } + + /* Disable all interrupts and request them */ + intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); + intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); + intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); + intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); + intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); + intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); + + ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0, + "switch_0", priv); + if (ret < 0) { + pr_err("failed to request switch_0 IRQ\n"); + goto out_unmap; + } + + ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0, + "switch_1", priv); + if (ret < 0) { + pr_err("failed to request switch_1 IRQ\n"); + goto out_free_irq0; + } + + /* Reset the MIB counters */ + reg = core_readl(priv, CORE_GMNCFGCFG); + reg |= RST_MIB_CNT; + core_writel(priv, reg, CORE_GMNCFGCFG); + reg &= ~RST_MIB_CNT; + core_writel(priv, reg, CORE_GMNCFGCFG); + + /* Get the maximum number of ports for this switch */ + priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1; + if (priv->hw_params.num_ports > DSA_MAX_PORTS) + priv->hw_params.num_ports = DSA_MAX_PORTS; + + /* Assume a single GPHY setup if we can't read that property */ + if (of_property_read_u32(dn, "brcm,num-gphy", + &priv->hw_params.num_gphy)) + priv->hw_params.num_gphy = 1; + + /* Enable all valid ports and disable those unused */ + for (port = 0; port < priv->hw_params.num_ports; port++) { + /* IMP port receives special treatment */ + if ((1 << port) & ds->phys_port_mask) + bcm_sf2_port_setup(ds, port, NULL); + else if (dsa_is_cpu_port(ds, port)) + bcm_sf2_imp_setup(ds, port); + else + bcm_sf2_port_disable(ds, port, NULL); + } + + /* Include the pseudo-PHY address and the broadcast PHY address to + * divert reads towards our workaround + */ + ds->phys_mii_mask |= ((1 << 30) | (1 << 0)); + + rev = reg_readl(priv, REG_SWITCH_REVISION); + priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) & + SWITCH_TOP_REV_MASK; + priv->hw_params.core_rev = (rev & SF2_REV_MASK); + + rev = reg_readl(priv, REG_PHY_REVISION); + priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK; + + pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n", + priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff, + priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff, + priv->core, priv->irq0, priv->irq1); + + return 0; + +out_free_irq0: + free_irq(priv->irq0, priv); +out_unmap: + base = &priv->core; + for (i = 0; i < BCM_SF2_REGS_NUM; i++) { + iounmap(*base); + base++; + } + return ret; +} + +static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr) +{ + return 0; +} + +static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + + /* The BCM7xxx PHY driver expects to find the integrated PHY revision + * in bits 15:8 and the patch level in bits 7:0 which is exactly what + * the REG_PHY_REVISION register layout is. + */ + + return priv->hw_params.gphy_rev; +} + +static int bcm_sf2_sw_indir_rw(struct dsa_switch *ds, int op, int addr, + int regnum, u16 val) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + int ret = 0; + u32 reg; + + reg = reg_readl(priv, REG_SWITCH_CNTRL); + reg |= MDIO_MASTER_SEL; + reg_writel(priv, reg, REG_SWITCH_CNTRL); + + /* Page << 8 | offset */ + reg = 0x70; + reg <<= 2; + core_writel(priv, addr, reg); + + /* Page << 8 | offset */ + reg = 0x80 << 8 | regnum << 1; + reg <<= 2; + + if (op) + ret = core_readl(priv, reg); + else + core_writel(priv, val, reg); + + reg = reg_readl(priv, REG_SWITCH_CNTRL); + reg &= ~MDIO_MASTER_SEL; + reg_writel(priv, reg, REG_SWITCH_CNTRL); + + return ret & 0xffff; +} + +static int bcm_sf2_sw_phy_read(struct dsa_switch *ds, int addr, int regnum) +{ + /* Intercept reads from the MDIO broadcast address or Broadcom + * pseudo-PHY address + */ + switch (addr) { + case 0: + case 30: + return bcm_sf2_sw_indir_rw(ds, 1, addr, regnum, 0); + default: + return 0xffff; + } +} + +static int bcm_sf2_sw_phy_write(struct dsa_switch *ds, int addr, int regnum, + u16 val) +{ + /* Intercept writes to the MDIO broadcast address or Broadcom + * pseudo-PHY address + */ + switch (addr) { + case 0: + case 30: + bcm_sf2_sw_indir_rw(ds, 0, addr, regnum, val); + break; + } + + return 0; +} + +static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 id_mode_dis = 0, port_mode; + const char *str = NULL; + u32 reg; + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + str = "RGMII (no delay)"; + id_mode_dis = 1; + case PHY_INTERFACE_MODE_RGMII_TXID: + if (!str) + str = "RGMII (TX delay)"; + port_mode = EXT_GPHY; + break; + case PHY_INTERFACE_MODE_MII: + str = "MII"; + port_mode = EXT_EPHY; + break; + case PHY_INTERFACE_MODE_REVMII: + str = "Reverse MII"; + port_mode = EXT_REVMII; + break; + default: + /* All other PHYs: internal and MoCA */ + goto force_link; + } + + /* If the link is down, just disable the interface to conserve power */ + if (!phydev->link) { + reg = reg_readl(priv, REG_RGMII_CNTRL_P(port)); + reg &= ~RGMII_MODE_EN; + reg_writel(priv, reg, REG_RGMII_CNTRL_P(port)); + goto force_link; + } + + /* Clear id_mode_dis bit, and the existing port mode, but + * make sure we enable the RGMII block for data to pass + */ + reg = reg_readl(priv, REG_RGMII_CNTRL_P(port)); + reg &= ~ID_MODE_DIS; + reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT); + reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN); + + reg |= port_mode | RGMII_MODE_EN; + if (id_mode_dis) + reg |= ID_MODE_DIS; + + if (phydev->pause) { + if (phydev->asym_pause) + reg |= TX_PAUSE_EN; + reg |= RX_PAUSE_EN; + } + + reg_writel(priv, reg, REG_RGMII_CNTRL_P(port)); + + pr_info("Port %d configured for %s\n", port, str); + +force_link: + /* Force link settings detected from the PHY */ + reg = SW_OVERRIDE; + switch (phydev->speed) { + case SPEED_1000: + reg |= SPDSTS_1000 << SPEED_SHIFT; + break; + case SPEED_100: + reg |= SPDSTS_100 << SPEED_SHIFT; + break; + } + + if (phydev->link) + reg |= LINK_STS; + if (phydev->duplex == DUPLEX_FULL) + reg |= DUPLX_MODE; + + core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port)); +} + +static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, + struct fixed_phy_status *status) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + u32 link, duplex, pause, speed; + u32 reg; + + link = core_readl(priv, CORE_LNKSTS); + duplex = core_readl(priv, CORE_DUPSTS); + pause = core_readl(priv, CORE_PAUSESTS); + speed = core_readl(priv, CORE_SPDSTS); + + speed >>= (port * SPDSTS_SHIFT); + speed &= SPDSTS_MASK; + + status->link = 0; + + /* Port 7 is special as we do not get link status from CORE_LNKSTS, + * which means that we need to force the link at the port override + * level to get the data to flow. We do use what the interrupt handler + * did determine before. + */ + if (port == 7) { + status->link = priv->port_sts[port].link; + reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(7)); + reg |= SW_OVERRIDE; + if (status->link) + reg |= LINK_STS; + else + reg &= ~LINK_STS; + core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(7)); + status->duplex = 1; + } else { + status->link = !!(link & (1 << port)); + status->duplex = !!(duplex & (1 << port)); + } + + switch (speed) { + case SPDSTS_10: + status->speed = SPEED_10; + break; + case SPDSTS_100: + status->speed = SPEED_100; + break; + case SPDSTS_1000: + status->speed = SPEED_1000; + break; + } + + if ((pause & (1 << port)) && + (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) { + status->asym_pause = 1; + status->pause = 1; + } + + if (pause & (1 << port)) + status->pause = 1; +} + +static int bcm_sf2_sw_suspend(struct dsa_switch *ds) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + unsigned int port; + + intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); + intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); + intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); + intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); + intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); + intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); + + /* Disable all ports physically present including the IMP + * port, the other ones have already been disabled during + * bcm_sf2_sw_setup + */ + for (port = 0; port < DSA_MAX_PORTS; port++) { + if ((1 << port) & ds->phys_port_mask || + dsa_is_cpu_port(ds, port)) + bcm_sf2_port_disable(ds, port, NULL); + } + + return 0; +} + +static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv) +{ + unsigned int timeout = 1000; + u32 reg; + + reg = core_readl(priv, CORE_WATCHDOG_CTRL); + reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET; + core_writel(priv, reg, CORE_WATCHDOG_CTRL); + + do { + reg = core_readl(priv, CORE_WATCHDOG_CTRL); + if (!(reg & SOFTWARE_RESET)) + break; + + usleep_range(1000, 2000); + } while (timeout-- > 0); + + if (timeout == 0) + return -ETIMEDOUT; + + return 0; +} + +static int bcm_sf2_sw_resume(struct dsa_switch *ds) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + unsigned int port; + u32 reg; + int ret; + + ret = bcm_sf2_sw_rst(priv); + if (ret) { + pr_err("%s: failed to software reset switch\n", __func__); + return ret; + } + + /* Reinitialize the single GPHY */ + if (priv->hw_params.num_gphy == 1) { + reg = reg_readl(priv, REG_SPHY_CNTRL); + reg |= PHY_RESET; + reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS); + reg_writel(priv, reg, REG_SPHY_CNTRL); + udelay(21); + reg = reg_readl(priv, REG_SPHY_CNTRL); + reg &= ~PHY_RESET; + reg_writel(priv, reg, REG_SPHY_CNTRL); + } + + for (port = 0; port < DSA_MAX_PORTS; port++) { + if ((1 << port) & ds->phys_port_mask) + bcm_sf2_port_setup(ds, port, NULL); + else if (dsa_is_cpu_port(ds, port)) + bcm_sf2_imp_setup(ds, port); + } + + return 0; +} + +static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port, + struct ethtool_wolinfo *wol) +{ + struct net_device *p = ds->dst[ds->index].master_netdev; + struct bcm_sf2_priv *priv = ds_to_priv(ds); + struct ethtool_wolinfo pwol; + + /* Get the parent device WoL settings */ + p->ethtool_ops->get_wol(p, &pwol); + + /* Advertise the parent device supported settings */ + wol->supported = pwol.supported; + memset(&wol->sopass, 0, sizeof(wol->sopass)); + + if (pwol.wolopts & WAKE_MAGICSECURE) + memcpy(&wol->sopass, pwol.sopass, sizeof(wol->sopass)); + + if (priv->wol_ports_mask & (1 << port)) + wol->wolopts = pwol.wolopts; + else + wol->wolopts = 0; +} + +static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port, + struct ethtool_wolinfo *wol) +{ + struct net_device *p = ds->dst[ds->index].master_netdev; + struct bcm_sf2_priv *priv = ds_to_priv(ds); + s8 cpu_port = ds->dst[ds->index].cpu_port; + struct ethtool_wolinfo pwol; + + p->ethtool_ops->get_wol(p, &pwol); + if (wol->wolopts & ~pwol.supported) + return -EINVAL; + + if (wol->wolopts) + priv->wol_ports_mask |= (1 << port); + else + priv->wol_ports_mask &= ~(1 << port); + + /* If we have at least one port enabled, make sure the CPU port + * is also enabled. If the CPU port is the last one enabled, we disable + * it since this configuration does not make sense. + */ + if (priv->wol_ports_mask && priv->wol_ports_mask != (1 << cpu_port)) + priv->wol_ports_mask |= (1 << cpu_port); + else + priv->wol_ports_mask &= ~(1 << cpu_port); + + return p->ethtool_ops->set_wol(p, wol); +} + +static struct dsa_switch_driver bcm_sf2_switch_driver = { + .tag_protocol = DSA_TAG_PROTO_BRCM, + .priv_size = sizeof(struct bcm_sf2_priv), + .probe = bcm_sf2_sw_probe, + .setup = bcm_sf2_sw_setup, + .set_addr = bcm_sf2_sw_set_addr, + .get_phy_flags = bcm_sf2_sw_get_phy_flags, + .phy_read = bcm_sf2_sw_phy_read, + .phy_write = bcm_sf2_sw_phy_write, + .get_strings = bcm_sf2_sw_get_strings, + .get_ethtool_stats = bcm_sf2_sw_get_ethtool_stats, + .get_sset_count = bcm_sf2_sw_get_sset_count, + .adjust_link = bcm_sf2_sw_adjust_link, + .fixed_link_update = bcm_sf2_sw_fixed_link_update, + .suspend = bcm_sf2_sw_suspend, + .resume = bcm_sf2_sw_resume, + .get_wol = bcm_sf2_sw_get_wol, + .set_wol = bcm_sf2_sw_set_wol, + .port_enable = bcm_sf2_port_setup, + .port_disable = bcm_sf2_port_disable, + .get_eee = bcm_sf2_sw_get_eee, + .set_eee = bcm_sf2_sw_set_eee, +}; + +static int __init bcm_sf2_init(void) +{ + register_switch_driver(&bcm_sf2_switch_driver); + + return 0; +} +module_init(bcm_sf2_init); + +static void __exit bcm_sf2_exit(void) +{ + unregister_switch_driver(&bcm_sf2_switch_driver); +} +module_exit(bcm_sf2_exit); + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Driver for Broadcom Starfighter 2 ethernet switch chip"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:brcm-sf2"); |