diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-38x.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/armada-38x.dtsi | 122 |
1 files changed, 100 insertions, 22 deletions
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 1dff30a81e24..3312be6c82cc 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -59,9 +59,13 @@ aliases { gpio0 = &gpio0; gpio1 = &gpio1; - ethernet0 = ð0; - ethernet1 = ð1; - ethernet2 = ð2; + serial0 = &uart0; + serial1 = &uart1; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts-extended = <&mpic 3>; }; soc { @@ -139,6 +143,10 @@ reg = <0x8000 0x1000>; cache-unified; cache-level = <2>; + arm,double-linefill-incr = <1>; + arm,double-linefill-wrap = <0>; + arm,double-linefill = <1>; + prefetch-data = <1>; }; scu@c000 { @@ -163,7 +171,8 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; reg = <0x10600 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -174,7 +183,8 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; reg = <0x10680 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -216,7 +226,7 @@ status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; @@ -368,7 +378,7 @@ reg = <0x20000 0x100>, <0x20180 0x20>; }; - mpic: interrupt-controller@20000 { + mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; @@ -419,6 +429,27 @@ reg = <0x22000 0x1000>; }; + /* + * As a special exception to the "order by + * register address" rule, the eth0 node is + * placed here to ensure that it gets + * registered as the first interface, since + * the network subsystem doesn't allow naming + * interfaces using DT aliases. Without this, + * the ordering of interfaces is different + * from the one used in U-Boot and the + * labeling of interfaces on the boards, which + * is very confusing for users. + */ + eth0: ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x4000>; + interrupts-extended = <&mpic 8>; + clocks = <&gateclk 4>; + tx-csum-limit = <9800>; + status = "disabled"; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -435,7 +466,7 @@ status = "disabled"; }; - usb@50000 { + usb@58000 { compatible = "marvell,orion-ehci"; reg = <0x58000 0x500>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; @@ -444,7 +475,7 @@ }; xor@60800 { - compatible = "marvell,orion-xor"; + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60800 0x100 0x60a00 0x100>; clocks = <&gateclk 22>; @@ -464,7 +495,7 @@ }; xor@60900 { - compatible = "marvell,orion-xor"; + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; clocks = <&gateclk 28>; @@ -483,15 +514,7 @@ }; }; - eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x4000>; - interrupts-extended = <&mpic 8>; - clocks = <&gateclk 4>; - status = "disabled"; - }; - - mdio@72004 { + mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; @@ -499,6 +522,21 @@ clocks = <&gateclk 4>; }; + crypto@90000 { + compatible = "marvell,armada-38x-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 23>, <&gateclk 21>, + <&gateclk 14>, <&gateclk 16>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + rtc@a3800 { compatible = "marvell,armada-380-rtc"; reg = <0xa3800 0x20>, <0x184a0 0x0c>; @@ -514,6 +552,14 @@ status = "disabled"; }; + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -548,8 +594,11 @@ sdhci@d8000 { compatible = "marvell,armada-380-sdhci"; - reg = <0xd8000 0x1000>, <0xdc000 0x100>; - interrupts = <0 25 0x4>; + reg-names = "sdhci", "mbus", "conf-sdio3"; + reg = <0xd8000 0x1000>, + <0xdc000 0x100>, + <0x18454 0x4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 17>; mrvl,clk-delay-cycles = <0x1F>; status = "disabled"; @@ -571,6 +620,35 @@ status = "disabled"; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x19) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x15) 0 0x800>; + clocks = <&gateclk 21>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; + }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { @@ -578,7 +656,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; /* 25 MHz reference crystal */ |