diff options
Diffstat (limited to 'arch/arm/boot/compressed')
-rw-r--r-- | arch/arm/boot/compressed/.gitignore | 6 | ||||
-rw-r--r-- | arch/arm/boot/compressed/Makefile | 67 | ||||
-rw-r--r-- | arch/arm/boot/compressed/decompress.c | 2 | ||||
-rw-r--r-- | arch/arm/boot/compressed/efi-header.S | 130 | ||||
-rw-r--r-- | arch/arm/boot/compressed/head-shmobile.S | 101 | ||||
-rw-r--r-- | arch/arm/boot/compressed/head.S | 110 | ||||
-rw-r--r-- | arch/arm/boot/compressed/libfdt_env.h | 4 | ||||
-rw-r--r-- | arch/arm/boot/compressed/mmcif-sh7372.c | 88 | ||||
-rw-r--r-- | arch/arm/boot/compressed/piggy.S (renamed from arch/arm/boot/compressed/piggy.lzma.S) | 2 | ||||
-rw-r--r-- | arch/arm/boot/compressed/piggy.gzip.S | 6 | ||||
-rw-r--r-- | arch/arm/boot/compressed/piggy.lz4.S | 6 | ||||
-rw-r--r-- | arch/arm/boot/compressed/piggy.lzo.S | 6 | ||||
-rw-r--r-- | arch/arm/boot/compressed/piggy.xzkern.S | 6 | ||||
-rw-r--r-- | arch/arm/boot/compressed/sdhi-sh7372.c | 95 | ||||
-rw-r--r-- | arch/arm/boot/compressed/sdhi-shmobile.c | 449 | ||||
-rw-r--r-- | arch/arm/boot/compressed/sdhi-shmobile.h | 11 | ||||
-rw-r--r-- | arch/arm/boot/compressed/string.c | 9 | ||||
-rw-r--r-- | arch/arm/boot/compressed/vmlinux.lds.S | 7 |
18 files changed, 282 insertions, 823 deletions
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index 0714e0334e33..86b2f5d28240 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -3,11 +3,7 @@ bswapsdi2.S font.c lib1funcs.S hyp-stub.S -piggy.gzip -piggy.lzo -piggy.lzma -piggy.xzkern -piggy.lz4 +piggy_data vmlinux vmlinux.lds diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3ea230aa94b7..d50430c40045 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -6,21 +6,6 @@ OBJS = -# Ensure that MMCIF loader code appears early in the image -# to minimise that number of bocks that have to be read in -# order to load it. -ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y) -OBJS += mmcif-sh7372.o -endif - -# Ensure that SDHI loader code appears early in the image -# to minimise that number of bocks that have to be read in -# order to load it. -ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y) -OBJS += sdhi-shmobile.o -OBJS += sdhi-sh7372.o -endif - AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) HEAD = head.o OBJS += misc.o decompress.o @@ -66,10 +51,6 @@ else endif endif -ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y) -OBJS += head-shmobile.o -endif - # # We now have a PIC decompressor implementation. Decompressors running # from RAM should not define ZTEXTADDR. Decompressors running directly @@ -85,11 +66,11 @@ endif CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" -suffix_$(CONFIG_KERNEL_GZIP) = gzip -suffix_$(CONFIG_KERNEL_LZO) = lzo -suffix_$(CONFIG_KERNEL_LZMA) = lzma -suffix_$(CONFIG_KERNEL_XZ) = xzkern -suffix_$(CONFIG_KERNEL_LZ4) = lz4 +compress-$(CONFIG_KERNEL_GZIP) = gzip +compress-$(CONFIG_KERNEL_LZO) = lzo +compress-$(CONFIG_KERNEL_LZMA) = lzma +compress-$(CONFIG_KERNEL_XZ) = xzkern +compress-$(CONFIG_KERNEL_LZ4) = lz4 # Borrowed libfdt files for the ATAG compatibility mode @@ -108,21 +89,29 @@ ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) OBJS += $(libfdt_objs) atags_to_fdt.o endif -targets := vmlinux vmlinux.lds \ - piggy.$(suffix_y) piggy.$(suffix_y).o \ - lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \ - bswapsdi2.S font.o font.c head.o misc.o $(OBJS) +targets := vmlinux vmlinux.lds piggy_data piggy.o \ + lib1funcs.o ashldi3.o bswapsdi2.o \ + head.o $(OBJS) + +clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \ + $(libfdt) $(libfdt_hdrs) hyp-stub.S -# Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ - lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ - hyp-stub.S +KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif +# -fstack-protector-strong triggers protection checks in this code, +# but it is being used too early to link to meaningful stack_chk logic. +nossp_flags := $(call cc-option, -fno-stack-protector) +CFLAGS_atags_to_fdt.o := $(nossp_flags) +CFLAGS_fdt.o := $(nossp_flags) +CFLAGS_fdt_ro.o := $(nossp_flags) +CFLAGS_fdt_rw.o := $(nossp_flags) +CFLAGS_fdt_wip.o := $(nossp_flags) + ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -DZIMAGE @@ -184,22 +173,26 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \ false; \ fi -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ +efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a + +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \ - $(bswapsdi2) FORCE + $(bswapsdi2) $(efi-obj-y) FORCE @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) -$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE - $(call if_changed,$(suffix_y)) +$(obj)/piggy_data: $(obj)/../Image FORCE + $(call if_changed,$(compress-y)) -$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/piggy_data CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) +AFLAGS_hyp-stub.o := -Wa,-march=armv7-a + $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index bd245d34952d..a0765e7ed6c7 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -57,5 +57,5 @@ extern char * strstr(const char * s1, const char *s2); int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)) { - return decompress(input, len, NULL, NULL, output, NULL, error); + return __decompress(input, len, NULL, NULL, output, 0, NULL, error); } diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S new file mode 100644 index 000000000000..9d5dc4fda3c1 --- /dev/null +++ b/arch/arm/boot/compressed/efi-header.S @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2013-2015 Linaro Ltd + * Authors: Roy Franz <roy.franz@linaro.org> + * Ard Biesheuvel <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .macro __nop +#ifdef CONFIG_EFI_STUB + @ This is almost but not quite a NOP, since it does clobber the + @ condition flags. But it is the best we can do for EFI, since + @ PE/COFF expects the magic string "MZ" at offset 0, while the + @ ARM/Linux boot protocol expects an executable instruction + @ there. + .inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000 +#else + mov r0, r0 +#endif + .endm + + .macro __EFI_HEADER +#ifdef CONFIG_EFI_STUB + b __efi_start + + .set start_offset, __efi_start - start + .org start + 0x3c + @ + @ The PE header can be anywhere in the file, but for + @ simplicity we keep it together with the MSDOS header + @ The offset to the PE/COFF header needs to be at offset + @ 0x3C in the MSDOS header. + @ The only 2 fields of the MSDOS header that are used are this + @ PE/COFF offset, and the "MZ" bytes at offset 0x0. + @ + .long pe_header - start @ Offset to the PE header. + +pe_header: + .ascii "PE\0\0" + +coff_header: + .short 0x01c2 @ ARM or Thumb + .short 2 @ nr_sections + .long 0 @ TimeDateStamp + .long 0 @ PointerToSymbolTable + .long 1 @ NumberOfSymbols + .short section_table - optional_header + @ SizeOfOptionalHeader + .short 0x306 @ Characteristics. + @ IMAGE_FILE_32BIT_MACHINE | + @ IMAGE_FILE_DEBUG_STRIPPED | + @ IMAGE_FILE_EXECUTABLE_IMAGE | + @ IMAGE_FILE_LINE_NUMS_STRIPPED + +optional_header: + .short 0x10b @ PE32 format + .byte 0x02 @ MajorLinkerVersion + .byte 0x14 @ MinorLinkerVersion + .long _end - __efi_start @ SizeOfCode + .long 0 @ SizeOfInitializedData + .long 0 @ SizeOfUninitializedData + .long efi_stub_entry - start @ AddressOfEntryPoint + .long start_offset @ BaseOfCode + .long 0 @ data + +extra_header_fields: + .long 0 @ ImageBase + .long 0x200 @ SectionAlignment + .long 0x200 @ FileAlignment + .short 0 @ MajorOperatingSystemVersion + .short 0 @ MinorOperatingSystemVersion + .short 0 @ MajorImageVersion + .short 0 @ MinorImageVersion + .short 0 @ MajorSubsystemVersion + .short 0 @ MinorSubsystemVersion + .long 0 @ Win32VersionValue + + .long _end - start @ SizeOfImage + .long start_offset @ SizeOfHeaders + .long 0 @ CheckSum + .short 0xa @ Subsystem (EFI application) + .short 0 @ DllCharacteristics + .long 0 @ SizeOfStackReserve + .long 0 @ SizeOfStackCommit + .long 0 @ SizeOfHeapReserve + .long 0 @ SizeOfHeapCommit + .long 0 @ LoaderFlags + .long 0x6 @ NumberOfRvaAndSizes + + .quad 0 @ ExportTable + .quad 0 @ ImportTable + .quad 0 @ ResourceTable + .quad 0 @ ExceptionTable + .quad 0 @ CertificationTable + .quad 0 @ BaseRelocationTable + +section_table: + @ + @ The EFI application loader requires a relocation section + @ because EFI applications must be relocatable. This is a + @ dummy section as far as we are concerned. + @ + .ascii ".reloc\0\0" + .long 0 @ VirtualSize + .long 0 @ VirtualAddress + .long 0 @ SizeOfRawData + .long 0 @ PointerToRawData + .long 0 @ PointerToRelocations + .long 0 @ PointerToLineNumbers + .short 0 @ NumberOfRelocations + .short 0 @ NumberOfLineNumbers + .long 0x42100040 @ Characteristics + + .ascii ".text\0\0\0" + .long _end - __efi_start @ VirtualSize + .long __efi_start @ VirtualAddress + .long _edata - __efi_start @ SizeOfRawData + .long __efi_start @ PointerToRawData + .long 0 @ PointerToRelocations + .long 0 @ PointerToLineNumbers + .short 0 @ NumberOfRelocations + .short 0 @ NumberOfLineNumbers + .long 0xe0500020 @ Characteristics + + .align 9 +__efi_start: +#endif + .endm diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S deleted file mode 100644 index e7f80928949c..000000000000 --- a/arch/arm/boot/compressed/head-shmobile.S +++ /dev/null @@ -1,101 +0,0 @@ -/* - * The head-file for SH-Mobile ARM platforms - * - * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * Simon Horman <horms@verge.net.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifdef CONFIG_ZBOOT_ROM - - .section ".start", "ax" - - /* load board-specific initialization code */ -#include <mach/zboot.h> - -#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI) - /* Load image from MMC/SD */ - adr sp, __tmp_stack + 256 - ldr r0, __image_start - ldr r1, __image_end - subs r1, r1, r0 - ldr r0, __load_base - bl mmc_loader - - /* Jump to loaded code */ - ldr r0, __loaded - ldr r1, __image_start - sub r0, r0, r1 - ldr r1, __load_base - add pc, r0, r1 - -__image_start: - .long _start -__image_end: - .long _got_end -__load_base: - .long MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM -__loaded: - .long __continue - .align -__tmp_stack: - .space 256 -__continue: -#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ - - adr r0, dtb_info - ldmia r0, {r1, r3, r4, r5, r7} - - sub r0, r0, r1 @ calculate the delta offset - add r5, r5, r0 @ _edata - - ldr lr, [r5, #0] @ check if valid DTB is present - cmp lr, r3 - bne 0f - - add r9, r7, #31 @ rounded up to a multiple - bic r9, r9, #31 @ ... of 32 bytes - - add r6, r9, r5 @ copy from _edata - add r9, r9, r4 @ to MEMORY_START - -1: ldmdb r6!, {r0 - r3, r10 - r12, lr} - cmp r6, r5 - stmdb r9!, {r0 - r3, r10 - r12, lr} - bhi 1b - - /* Success: Zero board ID, pointer to start of memory for atag/dtb */ - mov r7, #0 - mov r8, r4 - b 2f - - .align 2 -dtb_info: - .word dtb_info -#ifndef __ARMEB__ - .word 0xedfe0dd0 @ sig is 0xd00dfeed big endian -#else - .word 0xd00dfeed -#endif - .word MEMORY_START - .word _edata - .word 0x4000 @ maximum DTB size -0: - /* Failure: Zero board ID, NULL atag/dtb */ - mov r7, #0 - mov r8, #0 @ pass null pointer as atag -2 : - -#endif /* CONFIG_ZBOOT_ROM */ diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c41a793b519c..af11c2f8f3b7 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -10,8 +10,13 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/v7m.h> + +#include "efi-header.S" + + AR_CLASS( .arch armv7-a ) + M_CLASS( .arch armv7-m ) - .arch armv7-a /* * Debugging stuff * @@ -114,15 +119,20 @@ * sort out different calling conventions */ .align - .arm @ Always enter in ARM state + /* + * Always enter in ARM state for CPUs that support the ARM ISA. + * As of today (2014) that's exactly the members of the A and R + * classes. + */ + AR_CLASS( .arm ) start: .type start,#function .rept 7 - mov r0, r0 + __nop .endr ARM( mov r0, r0 ) ARM( b 1f ) - THUMB( adr r12, BSYM(1f) ) + THUMB( badr r12, 1f ) THUMB( bx r12 ) .word _magic_sig @ Magic numbers to help the loader @@ -131,15 +141,17 @@ start: .word 0x04030201 @ endianness flag THUMB( .thumb ) -1: - ARM_BE8( setend be ) @ go BE8 if compiled for BE8 - mrs r9, cpsr +1: __EFI_HEADER + + ARM_BE8( setend be ) @ go BE8 if compiled for BE8 + AR_CLASS( mrs r9, cpsr ) #ifdef CONFIG_ARM_VIRT_EXT bl __hyp_stub_install @ get into SVC mode, reversibly #endif mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer +#ifndef CONFIG_CPU_V7M /* * Booting from Angel - need to enter SVC mode and disable * FIQs/IRQs (numeric definitions from angel arm.h source). @@ -155,6 +167,7 @@ not_angel: safe_svcmode_maskall r0 msr spsr_cxsf, r9 @ Save the CPU boot mode in @ SPSR +#endif /* * Note that some cache flushing and other stuff may * be needed here - is there an Angel SWI call for this? @@ -168,9 +181,26 @@ not_angel: .text #ifdef CONFIG_AUTO_ZRELADDR - @ determine final kernel image address + /* + * Find the start of physical memory. As we are executing + * without the MMU on, we are in the physical address space. + * We just need to get rid of any offset by aligning the + * address. + * + * This alignment is a balance between the requirements of + * different platforms - we have chosen 128MB to allow + * platforms which align the start of their physical memory + * to 128MB to use this feature, while allowing the zImage + * to be placed within the first 128MB of memory on other + * platforms. Increasing the alignment means we place + * stricter alignment requirements on the start of physical + * memory, but relaxing it means that we break people who + * are already placing their zImage in (eg) the top 64MB + * of this range. + */ mov r4, pc and r4, r4, #0xf8000000 + /* Determine final kernel image address. */ add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -420,7 +450,7 @@ dtb_check_done: bl cache_clean_flush - adr r0, BSYM(restart) + badr r0, restart add r0, r0, r6 mov pc, r0 @@ -810,6 +840,16 @@ __common_mmu_cache_on: call_cache_fn: adr r12, proc_types #ifdef CONFIG_CPU_CP15 mrc p15, 0, r9, c0, c0 @ get processor ID +#elif defined(CONFIG_CPU_V7M) + /* + * On v7-M the processor id is located in the V7M_SCB_CPUID + * register, but as cache handling is IMPLEMENTATION DEFINED on + * v7-M (if existant at all) we just return early here. + * If V7M_SCB_CPUID were used the cpu ID functions (i.e. + * __armv7_mmu_cache_{on,off,flush}) would be selected which + * use cp15 registers that are not implemented on v7-M. + */ + bx lr #else ldr r9, =CONFIG_PROCESSOR_ID #endif @@ -1310,11 +1350,59 @@ __hyp_reentry_vectors: __enter_kernel: mov r0, #0 @ must be 0 - ARM( mov pc, r4 ) @ call kernel - THUMB( bx r4 ) @ entry point is always ARM + ARM( mov pc, r4 ) @ call kernel + M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class + THUMB( bx r4 ) @ entry point is always ARM for A/R classes reloc_code_end: +#ifdef CONFIG_EFI_STUB + .align 2 +_start: .long start - . + +ENTRY(efi_stub_entry) + @ allocate space on stack for passing current zImage address + @ and for the EFI stub to return of new entry point of + @ zImage, as EFI stub may copy the kernel. Pointer address + @ is passed in r2. r0 and r1 are passed through from the + @ EFI firmware to efi_entry + adr ip, _start + ldr r3, [ip] + add r3, r3, ip + stmfd sp!, {r3, lr} + mov r2, sp @ pass zImage address in r2 + bl efi_entry + + @ Check for error return from EFI stub. r0 has FDT address + @ or error code. + cmn r0, #1 + beq efi_load_fail + + @ Preserve return value of efi_entry() in r4 + mov r4, r0 + bl cache_clean_flush + bl cache_off + + @ Set parameters for booting zImage according to boot protocol + @ put FDT address in r2, it was returned by efi_entry() + @ r1 is the machine type, and r0 needs to be 0 + mov r0, #0 + mov r1, #0xFFFFFFFF + mov r2, r4 + + @ Branch to (possibly) relocated zImage that is in [sp] + ldr lr, [sp] + ldr ip, =start_offset + add lr, lr, ip + mov pc, lr @ no mode switch + +efi_load_fail: + @ Return EFI_LOAD_ERROR to EFI firmware on error. + ldr r0, =0x80000001 + ldmfd sp!, {ip, pc} +ENDPROC(efi_stub_entry) +#endif + .align .section ".stack", "aw", %nobits .L_user_stack: .space 4096 diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h index 1f4e71876b00..17ae0f3efac8 100644 --- a/arch/arm/boot/compressed/libfdt_env.h +++ b/arch/arm/boot/compressed/libfdt_env.h @@ -5,6 +5,10 @@ #include <linux/string.h> #include <asm/byteorder.h> +typedef __be16 fdt16_t; +typedef __be32 fdt32_t; +typedef __be64 fdt64_t; + #define fdt16_to_cpu(x) be16_to_cpu(x) #define cpu_to_fdt16(x) cpu_to_be16(x) #define fdt32_to_cpu(x) be32_to_cpu(x) diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c deleted file mode 100644 index 672ae95db5c3..000000000000 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * sh7372 MMCIF loader - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/mmc/sh_mmcif.h> -#include <linux/mmc/boot.h> -#include <mach/mmc.h> - -#define MMCIF_BASE (void __iomem *)0xe6bd0000 - -#define PORT84CR (void __iomem *)0xe6050054 -#define PORT85CR (void __iomem *)0xe6050055 -#define PORT86CR (void __iomem *)0xe6050056 -#define PORT87CR (void __iomem *)0xe6050057 -#define PORT88CR (void __iomem *)0xe6050058 -#define PORT89CR (void __iomem *)0xe6050059 -#define PORT90CR (void __iomem *)0xe605005a -#define PORT91CR (void __iomem *)0xe605005b -#define PORT92CR (void __iomem *)0xe605005c -#define PORT99CR (void __iomem *)0xe6050063 - -#define SMSTPCR3 (void __iomem *)0xe615013c - -/* SH7372 specific MMCIF loader - * - * loads the zImage from an MMC card starting from block 1. - * - * The image must be start with a vrl4 header and - * the zImage must start at offset 512 of the image. That is, - * at block 2 (=byte 1024) on the media - * - * Use the following line to write the vrl4 formated zImage - * to an MMC card - * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1 - */ -asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) -{ - mmc_init_progress(); - mmc_update_progress(MMC_PROGRESS_ENTER); - - /* Initialise MMC - * registers: PORT84CR-PORT92CR - * (MMCD0_0-MMCD0_7,MMCCMD0 Control) - * value: 0x04 - select function 4 - */ - __raw_writeb(0x04, PORT84CR); - __raw_writeb(0x04, PORT85CR); - __raw_writeb(0x04, PORT86CR); - __raw_writeb(0x04, PORT87CR); - __raw_writeb(0x04, PORT88CR); - __raw_writeb(0x04, PORT89CR); - __raw_writeb(0x04, PORT90CR); - __raw_writeb(0x04, PORT91CR); - __raw_writeb(0x04, PORT92CR); - - /* Initialise MMC - * registers: PORT99CR (MMCCLK0 Control) - * value: 0x10 | 0x04 - enable output | select function 4 - */ - __raw_writeb(0x14, PORT99CR); - - /* Enable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_INIT); - - /* setup MMCIF hardware */ - sh_mmcif_boot_init(MMCIF_BASE); - - mmc_update_progress(MMC_PROGRESS_LOAD); - - /* load kernel via MMCIF interface */ - sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */ - (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf); - - - /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_DONE); -} diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.S index d7e69cffbc0a..f72088495f43 100644 --- a/arch/arm/boot/compressed/piggy.lzma.S +++ b/arch/arm/boot/compressed/piggy.S @@ -1,6 +1,6 @@ .section .piggydata,#alloc .globl input_data input_data: - .incbin "arch/arm/boot/compressed/piggy.lzma" + .incbin "arch/arm/boot/compressed/piggy_data" .globl input_data_end input_data_end: diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.gzip.S deleted file mode 100644 index a68adf91a165..000000000000 --- a/arch/arm/boot/compressed/piggy.gzip.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.gzip" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S deleted file mode 100644 index 3d9a575618a3..000000000000 --- a/arch/arm/boot/compressed/piggy.lz4.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lz4" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S deleted file mode 100644 index a425ad95959a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzo.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzo" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S deleted file mode 100644 index 5703f300d027..000000000000 --- a/arch/arm/boot/compressed/piggy.xzkern.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.xzkern" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c deleted file mode 100644 index d279294f2381..000000000000 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * SuperH Mobile SDHI - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Kuninori Morimoto - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Parts inspired by u-boot - */ - -#include <linux/io.h> -#include <mach/mmc.h> -#include <linux/mmc/boot.h> -#include <linux/mmc/tmio.h> - -#include "sdhi-shmobile.h" - -#define PORT179CR 0xe60520b3 -#define PORT180CR 0xe60520b4 -#define PORT181CR 0xe60520b5 -#define PORT182CR 0xe60520b6 -#define PORT183CR 0xe60520b7 -#define PORT184CR 0xe60520b8 - -#define SMSTPCR3 0xe615013c - -#define CR_INPUT_ENABLE 0x10 -#define CR_FUNCTION1 0x01 - -#define SDHI1_BASE (void __iomem *)0xe6860000 -#define SDHI_BASE SDHI1_BASE - -/* SuperH Mobile SDHI loader - * - * loads the zImage from an SD card starting from block 0 - * on physical partition 1 - * - * The image must be start with a vrl4 header and - * the zImage must start at offset 512 of the image. That is, - * at block 1 (=byte 512) of physical partition 1 - * - * Use the following line to write the vrl4 formated zImage - * to an SD card - * # dd if=vrl4.out of=/dev/sdx bs=512 - */ -asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) -{ - int high_capacity; - - mmc_init_progress(); - - mmc_update_progress(MMC_PROGRESS_ENTER); - /* Initialise SDHI1 */ - /* PORT184CR: GPIO_FN_SDHICMD1 Control */ - __raw_writeb(CR_FUNCTION1, PORT184CR); - /* PORT179CR: GPIO_FN_SDHICLK1 Control */ - __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR); - /* PORT181CR: GPIO_FN_SDHID1_3 Control */ - __raw_writeb(CR_FUNCTION1, PORT183CR); - /* PORT182CR: GPIO_FN_SDHID1_2 Control */ - __raw_writeb(CR_FUNCTION1, PORT182CR); - /* PORT183CR: GPIO_FN_SDHID1_1 Control */ - __raw_writeb(CR_FUNCTION1, PORT181CR); - /* PORT180CR: GPIO_FN_SDHID1_0 Control */ - __raw_writeb(CR_FUNCTION1, PORT180CR); - - /* Enable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3); - - /* setup SDHI hardware */ - mmc_update_progress(MMC_PROGRESS_INIT); - high_capacity = sdhi_boot_init(SDHI_BASE); - if (high_capacity < 0) - goto err; - - mmc_update_progress(MMC_PROGRESS_LOAD); - /* load kernel */ - if (sdhi_boot_do_read(SDHI_BASE, high_capacity, - 0, /* Kernel is at block 1 */ - (len + TMIO_BBS - 1) / TMIO_BBS, buf)) - goto err; - - /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_DONE); - - return; -err: - for(;;); -} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c deleted file mode 100644 index bd3d46980955..000000000000 --- a/arch/arm/boot/compressed/sdhi-shmobile.c +++ /dev/null @@ -1,449 +0,0 @@ -/* - * SuperH Mobile SDHI - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Kuninori Morimoto - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Parts inspired by u-boot - */ - -#include <linux/io.h> -#include <linux/mmc/host.h> -#include <linux/mmc/core.h> -#include <linux/mmc/mmc.h> -#include <linux/mmc/sd.h> -#include <linux/mmc/tmio.h> -#include <mach/sdhi.h> - -#define OCR_FASTBOOT (1<<29) -#define OCR_HCS (1<<30) -#define OCR_BUSY (1<<31) - -#define RESP_CMD12 0x00000030 - -static inline u16 sd_ctrl_read16(void __iomem *base, int addr) -{ - return __raw_readw(base + addr); -} - -static inline u32 sd_ctrl_read32(void __iomem *base, int addr) -{ - return __raw_readw(base + addr) | - __raw_readw(base + addr + 2) << 16; -} - -static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val) -{ - __raw_writew(val, base + addr); -} - -static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val) -{ - __raw_writew(val, base + addr); - __raw_writew(val >> 16, base + addr + 2); -} - -#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \ - TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \ - TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \ - TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \ - TMIO_STAT_ILL_FUNC) - -static int sdhi_intr(void __iomem *base) -{ - unsigned long state = sd_ctrl_read32(base, CTL_STATUS); - - if (state & ALL_ERROR) { - sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR); - sd_ctrl_write32(base, CTL_IRQ_MASK, - ALL_ERROR | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return -EINVAL; - } - if (state & TMIO_STAT_CMDRESPEND) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_CMDRESPEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - if (state & TMIO_STAT_RXRDY) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - if (state & TMIO_STAT_DATAEND) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_DATAEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - - return -EAGAIN; -} - -static int sdhi_boot_wait_resp_end(void __iomem *base) -{ - int err = -EAGAIN, timeout = 10000000; - - while (timeout--) { - err = sdhi_intr(base); - if (err != -EAGAIN) - break; - udelay(1); - } - - return err; -} - -/* SDHI_CLK_CTRL */ -#define CLK_MMC_ENABLE (1 << 8) -#define CLK_MMC_INIT (1 << 6) /* clk / 256 */ - -static void sdhi_boot_mmc_clk_stop(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000); - msleep(10); - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE & - sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); - msleep(10); -} - -static void sdhi_boot_mmc_clk_start(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE | - sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); - msleep(10); - sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE); - msleep(10); -} - -static void sdhi_boot_reset(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_RESET_SD, 0x0000); - msleep(10); - sd_ctrl_write16(base, CTL_RESET_SD, 0x0001); - msleep(10); -} - -/* Set MMC clock / power. - * Note: This controller uses a simple divider scheme therefore it cannot - * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as - * MMC wont run that fast, it has to be clocked at 12MHz which is the next - * slowest setting. - */ -static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios) -{ - if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY) - return -EBUSY; - - if (ios->clock) - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, - ios->clock | CLK_MMC_ENABLE); - - /* Power sequence - OFF -> ON -> UP */ - switch (ios->power_mode) { - case MMC_POWER_OFF: /* power down SD bus */ - sdhi_boot_mmc_clk_stop(base); - break; - case MMC_POWER_ON: /* power up SD bus */ - break; - case MMC_POWER_UP: /* start bus clock */ - sdhi_boot_mmc_clk_start(base); - break; - } - - switch (ios->bus_width) { - case MMC_BUS_WIDTH_1: - sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0); - break; - case MMC_BUS_WIDTH_4: - sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0); - break; - } - - /* Let things settle. delay taken from winCE driver */ - udelay(140); - - return 0; -} - -/* These are the bitmasks the tmio chip requires to implement the MMC response - * types. Note that R1 and R6 are the same in this scheme. */ -#define RESP_NONE 0x0300 -#define RESP_R1 0x0400 -#define RESP_R1B 0x0500 -#define RESP_R2 0x0600 -#define RESP_R3 0x0700 -#define DATA_PRESENT 0x0800 -#define TRANSFER_READ 0x1000 - -static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd) -{ - int err, c = cmd->opcode; - - switch (mmc_resp_type(cmd)) { - case MMC_RSP_NONE: c |= RESP_NONE; break; - case MMC_RSP_R1: c |= RESP_R1; break; - case MMC_RSP_R1B: c |= RESP_R1B; break; - case MMC_RSP_R2: c |= RESP_R2; break; - case MMC_RSP_R3: c |= RESP_R3; break; - default: - return -EINVAL; - } - - /* No interrupts so this may not be cleared */ - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); - - sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg); - sd_ctrl_write16(base, CTL_SD_CMD, c); - - - sd_ctrl_write32(base, CTL_IRQ_MASK, - ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) & - sd_ctrl_read32(base, CTL_IRQ_MASK)); - - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE); - - return 0; -} - -static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity, - unsigned long block, unsigned short *buf) -{ - int err, i; - - /* CMD17 - Read */ - { - struct mmc_command cmd; - - cmd.opcode = MMC_READ_SINGLE_BLOCK | \ - TRANSFER_READ | DATA_PRESENT; - if (high_capacity) - cmd.arg = block; - else - cmd.arg = block * TMIO_BBS; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - sd_ctrl_write32(base, CTL_IRQ_MASK, - ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY | - TMIO_STAT_TXUNDERRUN) & - sd_ctrl_read32(base, CTL_IRQ_MASK)); - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS); - for (i = 0; i < TMIO_BBS / sizeof(*buf); i++) - *buf++ = sd_ctrl_read16(base, RESP_CMD12); - - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - return 0; -} - -int sdhi_boot_do_read(void __iomem *base, int high_capacity, - unsigned long offset, unsigned short count, - unsigned short *buf) -{ - unsigned long i; - int err = 0; - - for (i = 0; i < count; i++) { - err = sdhi_boot_do_read_single(base, high_capacity, offset + i, - buf + (i * TMIO_BBS / - sizeof(*buf))); - if (err) - return err; - } - - return 0; -} - -#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34) - -int sdhi_boot_init(void __iomem *base) -{ - bool sd_v2 = false, sd_v1_0 = false; - unsigned short cid; - int err, high_capacity = 0; - - sdhi_boot_mmc_clk_stop(base); - sdhi_boot_reset(base); - - /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */ - { - struct mmc_ios ios; - ios.power_mode = MMC_POWER_ON; - ios.bus_width = MMC_BUS_WIDTH_1; - ios.clock = CLK_MMC_INIT; - err = sdhi_boot_mmc_set_ios(base, &ios); - if (err) - return err; - } - - /* CMD0 */ - { - struct mmc_command cmd; - msleep(1); - cmd.opcode = MMC_GO_IDLE_STATE; - cmd.arg = 0; - cmd.flags = MMC_RSP_NONE; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - msleep(2); - } - - /* CMD8 - Test for SD version 2 */ - { - struct mmc_command cmd; - cmd.opcode = SD_SEND_IF_COND; - cmd.arg = (VOLTAGES != 0) << 8 | 0xaa; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); /* Ignore error */ - if ((cmd.resp[0] & 0xff) == 0xaa) - sd_v2 = true; - } - - /* CMD55 - Get OCR (SD) */ - { - int timeout = 1000; - struct mmc_command cmd; - - cmd.arg = 0; - - do { - cmd.opcode = MMC_APP_CMD; - cmd.flags = MMC_RSP_R1; - cmd.arg = 0; - err = sdhi_boot_request(base, &cmd); - if (err) - break; - - cmd.opcode = SD_APP_OP_COND; - cmd.flags = MMC_RSP_R3; - cmd.arg = (VOLTAGES & 0xff8000); - if (sd_v2) - cmd.arg |= OCR_HCS; - cmd.arg |= OCR_FASTBOOT; - err = sdhi_boot_request(base, &cmd); - if (err) - break; - - msleep(1); - } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); - - if (!err && timeout) { - if (!sd_v2) - sd_v1_0 = true; - high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; - } - } - - /* CMD1 - Get OCR (MMC) */ - if (!sd_v2 && !sd_v1_0) { - int timeout = 1000; - struct mmc_command cmd; - - do { - cmd.opcode = MMC_SEND_OP_COND; - cmd.arg = VOLTAGES | OCR_HCS; - cmd.flags = MMC_RSP_R3; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - - msleep(1); - } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); - - if (!timeout) - return -EAGAIN; - - high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; - } - - /* CMD2 - Get CID */ - { - struct mmc_command cmd; - cmd.opcode = MMC_ALL_SEND_CID; - cmd.arg = 0; - cmd.flags = MMC_RSP_R2; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD3 - * MMC: Set the relative address - * SD: Get the relative address - * Also puts the card into the standby state - */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SET_RELATIVE_ADDR; - cmd.arg = 0; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - cid = cmd.resp[0] >> 16; - } - - /* CMD9 - Get CSD */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SEND_CSD; - cmd.arg = cid << 16; - cmd.flags = MMC_RSP_R2; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD7 - Select the card */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SELECT_CARD; - //cmd.arg = rca << 16; - cmd.arg = cid << 16; - //cmd.flags = MMC_RSP_R1B; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD16 - Set the block size */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SET_BLOCKLEN; - cmd.arg = TMIO_BBS; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - return high_capacity; -} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.h b/arch/arm/boot/compressed/sdhi-shmobile.h deleted file mode 100644 index 92eaa09f985e..000000000000 --- a/arch/arm/boot/compressed/sdhi-shmobile.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef SDHI_MOBILE_H -#define SDHI_MOBILE_H - -#include <linux/compiler.h> - -int sdhi_boot_do_read(void __iomem *base, int high_capacity, - unsigned long offset, unsigned short count, - unsigned short *buf); -int sdhi_boot_init(void __iomem *base); - -#endif diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c index 36e53ef9200f..689467448736 100644 --- a/arch/arm/boot/compressed/string.c +++ b/arch/arm/boot/compressed/string.c @@ -65,6 +65,15 @@ size_t strlen(const char *s) return sc - s; } +size_t strnlen(const char *s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + int memcmp(const void *cs, const void *ct, size_t count) { const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count; diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index 2b60b843ac5e..81c493156ce8 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -48,6 +48,13 @@ SECTIONS *(.rodata) *(.rodata.*) } + .data : { + /* + * The EFI stub always executes from RAM, and runs strictly before the + * decompressor, so we can make an exception for its r/w data, and keep it + */ + *(.data.efistub) + } .piggydata : { *(.piggydata) } |