summaryrefslogtreecommitdiff
path: root/include/linux/videodev2.h
diff options
context:
space:
mode:
authorHans Verkuil <hans.verkuil@cisco.com>2012-04-24 09:25:18 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2012-05-18 16:36:27 -0300
commit06bba75d2a3e0bf558421b7548a6248ed5c7bfec (patch)
tree6ad5a78667c7e938588f23c3c813e75f954cd7f3 /include/linux/videodev2.h
parentdedb8cb1d64a118ac21eaabd941ac0b9acdd82fb (diff)
[media] videodev2.h: add enum/query/cap dv_timings ioctls
These new ioctls make it possible for the dv_timings API to replace the dv_preset API eventually. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'include/linux/videodev2.h')
-rw-r--r--include/linux/videodev2.h173
1 files changed, 149 insertions, 24 deletions
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index dc3e3ea28f99..13d84ed9d3a8 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -991,29 +991,56 @@ struct v4l2_dv_enum_preset {
* D V B T T I M I N G S
*/
-/* BT.656/BT.1120 timing data */
+/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
+ * @width: total width of the active video in pixels
+ * @height: total height of the active video in lines
+ * @interlaced: Interlaced or progressive
+ * @polarities: Positive or negative polarities
+ * @pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @hfrontporch:Horizontal front porch in pixels
+ * @hsync: Horizontal Sync length in pixels
+ * @hbackporch: Horizontal back porch in pixels
+ * @vfrontporch:Vertical front porch in lines
+ * @vsync: Vertical Sync length in lines
+ * @vbackporch: Vertical back porch in lines
+ * @il_vfrontporch:Vertical front porch for the even field
+ * (aka field 2) of interlaced field formats
+ * @il_vsync: Vertical Sync length for the even field
+ * (aka field 2) of interlaced field formats
+ * @il_vbackporch:Vertical back porch for the even field
+ * (aka field 2) of interlaced field formats
+ * @standards: Standards the timing belongs to
+ * @flags: Flags
+ * @reserved: Reserved fields, must be zeroed.
+ *
+ * A note regarding vertical interlaced timings: height refers to the total
+ * height of the active video frame (= two fields). The blanking timings refer
+ * to the blanking of each field. So the height of the total frame is
+ * calculated as follows:
+ *
+ * tot_height = height + vfrontporch + vsync + vbackporch +
+ * il_vfrontporch + il_vsync + il_vbackporch
+ *
+ * The active height of each field is height / 2.
+ */
struct v4l2_bt_timings {
- __u32 width; /* width in pixels */
- __u32 height; /* height in lines */
- __u32 interlaced; /* Interlaced or progressive */
- __u32 polarities; /* Positive or negative polarity */
- __u64 pixelclock; /* Pixel clock in HZ. Ex. 74.25MHz->74250000 */
- __u32 hfrontporch; /* Horizpontal front porch in pixels */
- __u32 hsync; /* Horizontal Sync length in pixels */
- __u32 hbackporch; /* Horizontal back porch in pixels */
- __u32 vfrontporch; /* Vertical front porch in pixels */
- __u32 vsync; /* Vertical Sync length in lines */
- __u32 vbackporch; /* Vertical back porch in lines */
- __u32 il_vfrontporch; /* Vertical front porch for bottom field of
- * interlaced field formats
- */
- __u32 il_vsync; /* Vertical sync length for bottom field of
- * interlaced field formats
- */
- __u32 il_vbackporch; /* Vertical back porch for bottom field of
- * interlaced field formats
- */
- __u32 reserved[16];
+ __u32 width;
+ __u32 height;
+ __u32 interlaced;
+ __u32 polarities;
+ __u64 pixelclock;
+ __u32 hfrontporch;
+ __u32 hsync;
+ __u32 hbackporch;
+ __u32 vfrontporch;
+ __u32 vsync;
+ __u32 vbackporch;
+ __u32 il_vfrontporch;
+ __u32 il_vsync;
+ __u32 il_vbackporch;
+ __u32 standards;
+ __u32 flags;
+ __u32 reserved[14];
} __attribute__ ((packed));
/* Interlaced or progressive format */
@@ -1024,8 +1051,42 @@ struct v4l2_bt_timings {
#define V4L2_DV_VSYNC_POS_POL 0x00000001
#define V4L2_DV_HSYNC_POS_POL 0x00000002
-
-/* DV timings */
+/* Timings standards */
+#define V4L2_DV_BT_STD_CEA861 (1 << 0) /* CEA-861 Digital TV Profile */
+#define V4L2_DV_BT_STD_DMT (1 << 1) /* VESA Discrete Monitor Timings */
+#define V4L2_DV_BT_STD_CVT (1 << 2) /* VESA Coordinated Video Timings */
+#define V4L2_DV_BT_STD_GTF (1 << 3) /* VESA Generalized Timings Formula */
+
+/* Flags */
+
+/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
+ GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
+ intervals are reduced, allowing a higher resolution over the same
+ bandwidth. This is a read-only flag. */
+#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0)
+/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
+ of six. These formats can be optionally played at 1 / 1.001 speed.
+ This is a read-only flag. */
+#define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1)
+/* CEA-861 specific: only valid for video transmitters, the flag is cleared
+ by receivers.
+ If the framerate of the format is a multiple of six, then the pixelclock
+ used to set up the transmitter is divided by 1.001 to make it compatible
+ with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
+ 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
+ such frequencies, then the flag will also be cleared. */
+#define V4L2_DV_FL_REDUCED_FPS (1 << 2)
+/* Specific to interlaced formats: if set, then field 1 is really one half-line
+ longer and field 2 is really one half-line shorter, so each field has
+ exactly the same number of half-lines. Whether half-lines can be detected
+ or used depends on the hardware. */
+#define V4L2_DV_FL_HALF_LINE (1 << 0)
+
+
+/** struct v4l2_dv_timings - DV timings
+ * @type: the type of the timings
+ * @bt: BT656/1120 timings
+ */
struct v4l2_dv_timings {
__u32 type;
union {
@@ -1037,6 +1098,64 @@ struct v4l2_dv_timings {
/* Values for the type field */
#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */
+
+/** struct v4l2_enum_dv_timings - DV timings enumeration
+ * @index: enumeration index
+ * @reserved: must be zeroed
+ * @timings: the timings for the given index
+ */
+struct v4l2_enum_dv_timings {
+ __u32 index;
+ __u32 reserved[3];
+ struct v4l2_dv_timings timings;
+};
+
+/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
+ * @min_width: width in pixels
+ * @max_width: width in pixels
+ * @min_height: height in lines
+ * @max_height: height in lines
+ * @min_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @max_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @standards: Supported standards
+ * @capabilities: Supported capabilities
+ * @reserved: Must be zeroed
+ */
+struct v4l2_bt_timings_cap {
+ __u32 min_width;
+ __u32 max_width;
+ __u32 min_height;
+ __u32 max_height;
+ __u64 min_pixelclock;
+ __u64 max_pixelclock;
+ __u32 standards;
+ __u32 capabilities;
+ __u32 reserved[16];
+} __attribute__ ((packed));
+
+/* Supports interlaced formats */
+#define V4L2_DV_BT_CAP_INTERLACED (1 << 0)
+/* Supports progressive formats */
+#define V4L2_DV_BT_CAP_PROGRESSIVE (1 << 1)
+/* Supports CVT/GTF reduced blanking */
+#define V4L2_DV_BT_CAP_REDUCED_BLANKING (1 << 2)
+/* Supports custom formats */
+#define V4L2_DV_BT_CAP_CUSTOM (1 << 3)
+
+/** struct v4l2_dv_timings_cap - DV timings capabilities
+ * @type: the type of the timings (same as in struct v4l2_dv_timings)
+ * @bt: the BT656/1120 timings capabilities
+ */
+struct v4l2_dv_timings_cap {
+ __u32 type;
+ __u32 reserved[3];
+ union {
+ struct v4l2_bt_timings_cap bt;
+ __u32 raw_data[32];
+ };
+};
+
+
/*
* V I D E O I N P U T S
*/
@@ -2513,6 +2632,12 @@ struct v4l2_create_buffers {
#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd)
#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd)
+/* Experimental, these three ioctls may change over the next couple of kernel
+ versions. */
+#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 96, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 97, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 98, struct v4l2_dv_timings_cap)
+
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */