diff options
| author | Tony Lindgren <tony@atomide.com> | 2016-03-30 10:36:06 -0700 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2016-03-30 10:36:06 -0700 |
| commit | 1809de7e7d37c585e01a1bcc583ea92b78fc759d (patch) | |
| tree | 76c5b35c2b04eafce86a1a729c02ab705eba44bc /arch/arm | |
| parent | ebf24414809200915b9ddf7f109bba7c278c8210 (diff) | |
| parent | 3ca4a238106dedc285193ee47f494a6584b6fd2f (diff) | |
Merge tag 'for-v4.6-rc/omap-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.6/fixes
ARM: OMAP2+: first hwmod fix for v4.6-rc
Fix a longstanding bug in the hwmod code that could cause
hardware SYSCONFIG register values to not match the kernel's
idea of what they should be, and that could result in lower
performance during IP block idle entry.
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-fixes-a-for-v4.6-rc/20160326231727/
Diffstat (limited to 'arch/arm')
695 files changed, 22871 insertions, 10633 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4f799e567fc8..cdfa6c2b7626 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -527,10 +527,10 @@ config ARCH_LPC32XX select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_LPC32XX + select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select HAVE_IDE select USE_OF help Support for the NXP LPC32XX family of processors @@ -547,6 +547,7 @@ config ARCH_PXA select CLKSRC_PXA select CLKSRC_MMIO select CLKSRC_OF + select CPU_XSCALE if !CPU_XSC3 select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE @@ -572,7 +573,6 @@ config ARCH_RPC select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT_MAP - select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -623,6 +623,7 @@ config ARCH_DAVINCI select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select CPU_ARM926T select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP @@ -724,6 +725,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-alpine/Kconfig" +source "arch/arm/mach-artpec/Kconfig" + source "arch/arm/mach-asm9260/Kconfig" source "arch/arm/mach-at91/Kconfig" @@ -879,10 +882,16 @@ config ARCH_STM32 select ARCH_HAS_RESET_CONTROLLER select ARMV7M_SYSTICK select CLKSRC_STM32 + select PINCTRL select RESET_CONTROLLER help Support for STMicroelectronics STM32 processors. +config MACH_STM32F429 + bool "STMicrolectronics STM32F429" + depends on ARCH_STM32 + default y + # Definitions to make life easier config ARCH_ACORN bool @@ -1212,7 +1221,6 @@ config PCI_HOST_ITE8152 select DMABOUNCE source "drivers/pci/Kconfig" -source "drivers/pci/pcie/Kconfig" source "drivers/pcmcia/Kconfig" @@ -1337,7 +1345,6 @@ config BIG_LITTLE config BL_SWITCHER bool "big.LITTLE switcher support" depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC - select ARM_CPU_SUSPEND select CPU_PM help The big.LITTLE "switcher" provides the core functionality to @@ -2111,7 +2118,8 @@ config ARCH_SUSPEND_POSSIBLE def_bool y config ARM_CPU_SUSPEND - def_bool PM_SLEEP + def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW + depends on ARCH_SUSPEND_POSSIBLE config ARCH_HIBERNATION_POSSIBLE bool diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index c6b6175d0203..1098e91d6d3f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1368,6 +1368,7 @@ config DEBUG_SIRFSOC_UART config DEBUG_LL_INCLUDE string default "debug/sa1100.S" if DEBUG_SA1100 + default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/at91.S" if DEBUG_AT91_UART default "debug/asm9260.S" if DEBUG_ASM9260_UART @@ -1656,6 +1657,14 @@ config DEBUG_UART_8250_WORD DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ DEBUG_BRCMSTB_UART +config DEBUG_UART_8250_PALMCHIP + bool "8250 UART is Palmchip BK-310x" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + help + Palmchip provides a UART implementation compatible with 16550 + except for having a different register layout. Say Y here if + the debug UART is of this type. + config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fe254108d1d9..8c3ce2ac44c4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -154,6 +154,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_ALPINE) += alpine +machine-$(CONFIG_ARCH_ARTPEC) += artpec machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm @@ -352,7 +353,6 @@ archclean: # My testing targets (bypasses dependencies) bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage -i zi:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ define archhelp diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9eca7aee927f..48fab15cfc02 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -88,7 +88,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) @$(kecho) ' Kernel: $@ is ready' -PHONY += initrd FORCE +PHONY += initrd initrd: @test "$(INITRD_PHYS)" != "" || \ (echo This machine does not support INITRD; exit -1) @@ -107,12 +107,4 @@ uinstall: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/uImage System.map "$(INSTALL_PATH)" -zi: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ - $(obj)/zImage System.map "$(INSTALL_PATH)" - -i: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ - $(obj)/Image System.map "$(INSTALL_PATH)" - subdir- := bootp compressed dts diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index 0714e0334e33..86b2f5d28240 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -3,11 +3,7 @@ bswapsdi2.S font.c lib1funcs.S hyp-stub.S -piggy.gzip -piggy.lzo -piggy.lzma -piggy.xzkern -piggy.lz4 +piggy_data vmlinux vmlinux.lds diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 4c23a68a0917..d50430c40045 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -66,11 +66,11 @@ endif CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" -suffix_$(CONFIG_KERNEL_GZIP) = gzip -suffix_$(CONFIG_KERNEL_LZO) = lzo -suffix_$(CONFIG_KERNEL_LZMA) = lzma -suffix_$(CONFIG_KERNEL_XZ) = xzkern -suffix_$(CONFIG_KERNEL_LZ4) = lz4 +compress-$(CONFIG_KERNEL_GZIP) = gzip +compress-$(CONFIG_KERNEL_LZO) = lzo +compress-$(CONFIG_KERNEL_LZMA) = lzma +compress-$(CONFIG_KERNEL_XZ) = xzkern +compress-$(CONFIG_KERNEL_LZ4) = lz4 # Borrowed libfdt files for the ATAG compatibility mode @@ -89,15 +89,12 @@ ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) OBJS += $(libfdt_objs) atags_to_fdt.o endif -targets := vmlinux vmlinux.lds \ - piggy.$(suffix_y) piggy.$(suffix_y).o \ - lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \ - bswapsdi2.S font.o font.c head.o misc.o $(OBJS) +targets := vmlinux vmlinux.lds piggy_data piggy.o \ + lib1funcs.o ashldi3.o bswapsdi2.o \ + head.o $(OBJS) -# Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ - lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ - hyp-stub.S +clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \ + $(libfdt) $(libfdt_hdrs) hyp-stub.S KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING @@ -106,6 +103,15 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif +# -fstack-protector-strong triggers protection checks in this code, +# but it is being used too early to link to meaningful stack_chk logic. +nossp_flags := $(call cc-option, -fno-stack-protector) +CFLAGS_atags_to_fdt.o := $(nossp_flags) +CFLAGS_fdt.o := $(nossp_flags) +CFLAGS_fdt_ro.o := $(nossp_flags) +CFLAGS_fdt_rw.o := $(nossp_flags) +CFLAGS_fdt_wip.o := $(nossp_flags) + ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -DZIMAGE @@ -169,22 +175,24 @@ fi efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \ $(bswapsdi2) $(efi-obj-y) FORCE @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) -$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE - $(call if_changed,$(suffix_y)) +$(obj)/piggy_data: $(obj)/../Image FORCE + $(call if_changed,$(compress-y)) -$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/piggy_data CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) +AFLAGS_hyp-stub.o := -Wa,-march=armv7-a + $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.S index a68adf91a165..f72088495f43 100644 --- a/arch/arm/boot/compressed/piggy.gzip.S +++ b/arch/arm/boot/compressed/piggy.S @@ -1,6 +1,6 @@ .section .piggydata,#alloc .globl input_data input_data: - .incbin "arch/arm/boot/compressed/piggy.gzip" + .incbin "arch/arm/boot/compressed/piggy_data" .globl input_data_end input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S deleted file mode 100644 index 3d9a575618a3..000000000000 --- a/arch/arm/boot/compressed/piggy.lz4.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lz4" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S deleted file mode 100644 index d7e69cffbc0a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzma.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzma" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S deleted file mode 100644 index a425ad95959a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzo.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzo" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S deleted file mode 100644 index 5703f300d027..000000000000 --- a/arch/arm/boot/compressed/piggy.xzkern.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.xzkern" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c index 36e53ef9200f..689467448736 100644 --- a/arch/arm/boot/compressed/string.c +++ b/arch/arm/boot/compressed/string.c @@ -65,6 +65,15 @@ size_t strlen(const char *s) return sc - s; } +size_t strnlen(const char *s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + int memcmp(const void *cs, const void *ct, size_t count) { const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70e8b26..95c1923ce6fa 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -2,6 +2,8 @@ ifeq ($(CONFIG_OF),y) dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb +dtb-$(CONFIG_MACH_ARTPEC6) += \ + artpec6-devboard.dtb dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC @@ -60,6 +62,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ + bcm2835-rpi-a.dtb \ bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ @@ -79,6 +82,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ + bcm47094-dlink-dir-885l.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012k.dtb @@ -156,7 +160,8 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \ dtb-$(CONFIG_ARCH_KEYSTONE) += \ k2hk-evm.dtb \ k2l-evm.dtb \ - k2e-evm.dtb + k2e-evm.dtb \ + keystone-k2g-evm.dtb dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-b3.dtb \ kirkwood-blackarmor-nas220.dtb \ @@ -189,9 +194,12 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-laplug.dtb \ + kirkwood-linkstation-lsqvl.dtb \ + kirkwood-linkstation-lsvl.dtb \ + kirkwood-linkstation-lswsxl.dtb \ + kirkwood-linkstation-lswvl.dtb \ + kirkwood-linkstation-lswxl.dtb \ kirkwood-lschlv2.dtb \ - kirkwood-lswvl.dtb \ - kirkwood-lswxl.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ @@ -317,12 +325,17 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ + imx6q-apalis-ixora.dtb \ imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ + imx6q-b450v3.dtb \ + imx6q-b650v3.dtb \ + imx6q-b850v3.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-dmo-edmqmx6.dtb \ + imx6q-evi.dtb \ imx6q-gk802.dtb \ imx6q-gw51xx.dtb \ imx6q-gw52xx.dtb \ @@ -332,6 +345,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ + imx6q-icore-rqs.dtb \ imx6q-nitrogen6x.dtb \ imx6q-nitrogen6_max.dtb \ imx6q-novena.dtb \ @@ -349,7 +363,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1110.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ - imx6q-wandboard-revb1.dtb + imx6q-wandboard-revb1.dtb \ + imx6qp-sabreauto.dtb \ + imx6qp-sabresd.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb @@ -460,6 +476,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ + omap3-sniper.dtb \ omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_TI81XX) += \ @@ -514,6 +531,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-linkstation-lsgl.dtb \ orion5x-linkstation-lswtgl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ @@ -524,6 +542,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-asus-nexus7-flo.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -611,6 +630,7 @@ dtb-$(CONFIG_ARCH_STI) += \ stih418-b2199.dtb dtb-$(CONFIG_ARCH_STM32)+= \ stm32f429-disco.dtb \ + stm32f469-disco.dtb \ stm32429i-eval.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ @@ -666,8 +686,10 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ + sun7i-a20-itead-ibox.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ + sun7i-a20-lamobo-r1.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ @@ -691,6 +713,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-ippo-q8h-v1.2.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ + sun8i-a83t-allwinner-h8homlet-v2.dtb \ + sun8i-a83t-cubietruck-plus.dtb \ sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -736,7 +760,9 @@ dtb-$(CONFIG_ARCH_U8500) += \ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld4-ref.dtb \ uniphier-ph1-ld6b-ref.dtb \ + uniphier-ph1-pro4-ace.dtb \ uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-pro4-sanji.dtb \ uniphier-ph1-sld3-ref.dtb \ uniphier-ph1-sld8-ref.dtb \ uniphier-proxstream2-gentil.dtb \ @@ -809,6 +835,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ + mt7623-evb.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index 9af2d60e9a7f..db8752fc480e 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -155,6 +155,16 @@ ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; bus-range = <0x00 0x00>; + msi-parent = <&msix>; + }; + + msix: msix@fbe00000 { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <96>; + al,msi-num-spis = <64>; }; }; }; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index ded1eb64ea52..6c667fb35449 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -236,7 +236,11 @@ status = "okay"; nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; ti,nand-xfer-type = "polled"; @@ -257,12 +261,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index f3db13d2d90e..0cc150b87b86 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -285,8 +285,10 @@ }; }; + +/include/ "tps65217.dtsi" + &tps { - compatible = "ti,tps65217"; /* * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only * mode") at poweroff. Most BeagleBone versions do not support RTC-only @@ -307,17 +309,12 @@ ti,pmic-shutdown-controller; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; regulator-name = "vdds_dpr"; regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -327,7 +324,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -337,25 +333,21 @@ }; ldo1_reg: regulator@3 { - reg = <3>; regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { - reg = <6>; regulator-name = "vdd_3v3a"; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index fda457b07e15..95461a28bc98 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -7,6 +7,7 @@ * published by the Free Software Foundation. */ #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Grinn AM335x ChiliSOM"; @@ -128,21 +129,16 @@ }; -&tps { - compatible = "ti,tps65217"; +/include/ "tps65217.dtsi" +&tps { regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; regulator-name = "vdds_dpr"; regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -152,7 +148,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -162,28 +157,24 @@ }; ldo1_reg: regulator@3 { - reg = <3>; regulator-name = "vio,vrtc,vdds"; regulator-boot-on; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; regulator-name = "vdd_3v3aux"; regulator-boot-on; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; regulator-name = "vdd_1v8"; regulator-boot-on; regulator-always-on; }; ldo4_reg: regulator@6 { - reg = <6>; regulator-name = "vdd_3v3d"; regulator-boot-on; regulator-always-on; @@ -218,7 +209,11 @@ pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -237,12 +232,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 42e9b665582a..e835644c5054 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "CompuLab CM-T335"; @@ -40,12 +41,51 @@ regulator-max-microvolt = <3300000>; }; + /* Regulator for WiFi */ + vwlan_fixed: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vwlan_fixed"; + gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */ + enable-active-high; + regulator-boot-off; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 0>; brightness-levels = <0 51 53 56 62 75 101 152 255>; default-brightness-level = <8>; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "cm-t335"; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Headphone", "Headphone Jack"; + + simple-audio-card,routing = + "Headphone Jack", "LHPOUT", + "Headphone Jack", "RHPOUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic Jack"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic23>; + system-clock-frequency = <12000000>; + }; + }; }; &am33xx_pinmux { @@ -134,6 +174,24 @@ >; }; + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* uart1_ctsn.dcan0_tx */ + AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) + /* uart1_rtsn.dcan0_rx */ + AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2) + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* uart1_rxd.dcan1_tx */ + AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) + /* uart1_txd.dcan1_rx */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2) + >; + }; + ecap0_pins: pinmux_ecap0_pins { pinctrl-single,pins = < /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ @@ -223,6 +281,21 @@ >; }; + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + /* spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0) + /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + /* spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0) + /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) + /* spi0_cs1.spi0_cs1 */ + AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0) + >; + }; + /* wl1271 bluetooth */ bluetooth_pins: pinmux_bluetooth_pins { pinctrl-single,pins = < @@ -230,6 +303,30 @@ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; + + /* TLV320AIC23B codec */ + mcasp1_pins: pinmux_mcasp1_pins { + pinctrl-single,pins = < + /* MII1_CRS.mcasp1_aclkx */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* MII1_RX_ER.mcasp1_fsx */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* MII1_COL.mcasp1_axr2 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* RMII1_REF_CLK.mcasp1_axr3 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) + >; + }; + + /* wl1271 WiFi */ + wifi_pins: pinmux_wifi_pins { + pinctrl-single,pins = < + /* EMU1.gpio3_8 - WiFi IRQ */ + AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) + /* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */ + AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) + >; + }; }; &uart0 { @@ -264,6 +361,13 @@ status = "okay"; compatible = "emmicro,em3027"; reg = <0x56>; }; + /* Audio codec */ + tlv320aic23: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; }; &usb { @@ -302,7 +406,11 @@ status = "okay"; pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -321,12 +429,9 @@ status = "okay"; gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ @@ -394,3 +499,70 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; }; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_pins>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; +}; + +/* Touschscreen and analog digital converter */ +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x01 0x10 0x23 0x32>; + ti,charge-delay = <0x400>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/* CPU audio */ +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 16 serializers */ + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; + + #sound-dai-cells= <0>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + ti,pindir-d0-out-d1-in = <1>; + /* WLS1271 WiFi */ + wlcore: wlcore@1 { + compatible = "ti,wl1271"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins>; + reg = <1>; + spi-max-frequency = <48000000>; + clock-xtal; + ref-clock-frequency = <38400000>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + vwlan-supply = <&vwlan_fixed>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 0d6a68ce434a..28b916210271 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -519,7 +519,11 @@ pinctrl-0 = <&nandflash_pins_s0>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -538,12 +542,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 54f113546ecc..6c3a9bf3638a 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -11,6 +11,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { cpus { @@ -129,7 +130,11 @@ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-width = <1>; @@ -147,12 +152,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 77559a1ded60..f313999c503e 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -375,15 +375,11 @@ wp-gpios = <&gpio3 18 0>; }; -&tps { - compatible = "ti,tps65217"; +#include "tps65217.dtsi" +&tps { regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* +1.5V voltage with ±4% tolerance */ regulator-min-microvolt = <1450000>; regulator-max-microvolt = <1550000>; @@ -392,7 +388,6 @@ }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <915000>; @@ -402,7 +397,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <915000>; @@ -412,7 +406,6 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* +1.8V voltage with ±4% tolerance */ regulator-min-microvolt = <1750000>; regulator-max-microvolt = <1870000>; @@ -421,7 +414,6 @@ }; ldo2_reg: regulator@4 { - reg = <4>; /* +3.3V voltage with ±4% tolerance */ regulator-min-microvolt = <3175000>; regulator-max-microvolt = <3430000>; @@ -430,7 +422,6 @@ }; ldo3_reg: regulator@5 { - reg = <5>; /* +1.8V voltage with ±4% tolerance */ regulator-min-microvolt = <1750000>; regulator-max-microvolt = <1870000>; @@ -439,7 +430,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* +3.3V voltage with ±4% tolerance */ regulator-min-microvolt = <3175000>; regulator-max-microvolt = <3430000>; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 471a3a70ea1f..8867aaaec54d 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -420,9 +420,9 @@ vin-supply = <&vbat>; }; -&tps { - compatible = "ti,tps65217"; +/include/ "tps65217.dtsi" +&tps { backlight { isel = <1>; /* ISET1 */ fdim = <200>; /* TPS65217_BL_FDIM_200HZ */ @@ -430,17 +430,12 @@ }; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* VDD_1V8 system supply */ regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -450,7 +445,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -460,21 +454,18 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* VRTC 1.8V always-on supply */ regulator-name = "vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; /* 3.3V rail */ regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; /* VDD_3V3A 3.3V rail */ regulator-name = "vdd_3v3a"; regulator-min-microvolt = <3300000>; @@ -482,7 +473,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* VDD_3V3B 3.3V rail */ regulator-name = "vdd_3v3b"; regulator-always-on; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index c20ae6c6f6c7..d4b7f3bd553f 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -8,6 +8,7 @@ */ #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Phytec AM335x phyCORE"; @@ -165,7 +166,11 @@ pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */ nandflash: nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-nand = "true"; @@ -184,13 +189,10 @@ gpmc,access-ns = <30>; gpmc,rd-cycle-ns = <30>; gpmc,wr-cycle-ns = <30>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <50>; gpmc,cycle2cycle-diffcsen; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 1b5b044fcd91..865de8500f1c 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -46,7 +46,7 @@ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; debounce-interval = <1000>; - gpio-key,wakeup; + wakeup-source; }; front_button { @@ -54,7 +54,7 @@ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; linux,code = <KEY_FRONT>; debounce-interval = <1000>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index d38edfa53bb9..a6efbe6eda3b 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -19,6 +19,10 @@ }; }; + chosen { + stdout-path = &uart0; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -63,12 +67,28 @@ default-brightness-level = <6>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* audio external oscillator */ + tlv320aic3x_mclk: oscillator@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; /* 24.576MHz */ + }; + }; + sound { compatible = "ti,da830-evm-audio"; ti,model = "AM335x-SL50"; ti,audio-codec = <&audio_codec>; ti,mcasp-controller = <&mcasp0>; - ti,codec-clock-rate = <12000000>; + + clocks = <&tlv320aic3x_mclk>; + clock-names = "mclk"; + ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", @@ -226,7 +246,7 @@ AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ >; }; @@ -375,19 +395,16 @@ pinctrl-0 = <&uart4_pins>; }; +#include "tps65217.dtsi" + &tps { - compatible = "ti,tps65217"; ti,pmic-shutdown-controller; interrupt-parent = <&intc>; interrupts = <7>; /* NNMI */ regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* VDDS_DDR */ regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -395,7 +412,6 @@ }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -405,7 +421,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -415,7 +430,6 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* VRTC / VIO / VDDS*/ regulator-always-on; regulator-min-microvolt = <1800000>; @@ -423,7 +437,6 @@ }; ldo2_reg: regulator@4 { - reg = <4>; /* VDD_3V3AUX */ regulator-always-on; regulator-min-microvolt = <3300000>; @@ -431,7 +444,6 @@ }; ldo3_reg: regulator@5 { - reg = <5>; /* VDD_1V8 */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -439,7 +451,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* VDD_3V3A */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 04885f9f959e..55ca9c7dcf6a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -439,6 +439,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; @@ -865,6 +866,8 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index df955ba4dc62..6e4f5af3d8f8 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -73,7 +73,7 @@ global_timer: timer@48240200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x48240200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -81,7 +81,7 @@ local_timer: timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x100>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -290,6 +290,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; @@ -893,21 +894,11 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; - am43xx_control_usb2phy1: control-phy@44e10620 { - compatible = "ti,control-phy-usb2-am437"; - reg = <0x44e10620 0x4>; - reg-names = "power"; - }; - - am43xx_control_usb2phy2: control-phy@0x44e10628 { - compatible = "ti,control-phy-usb2-am437"; - reg = <0x44e10628 0x4>; - reg-names = "power"; - }; - ocp2scp0: ocp2scp@483a8000 { compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; #address-cells = <1>; @@ -918,7 +909,7 @@ usb2_phy1: phy@483a8000 { compatible = "ti,am437x-usb2"; reg = <0x483a8000 0x8000>; - ctrl-module = <&am43xx_control_usb2phy1>; + syscon-phy-power = <&scm_conf 0x620>; clocks = <&usb_phy0_always_on_clk32k>, <&usb_otg_ss0_refclk960m>; clock-names = "wkupclk", "refclk"; @@ -937,7 +928,7 @@ usb2_phy2: phy@483e8000 { compatible = "ti,am437x-usb2"; reg = <0x483e8000 0x8000>; - ctrl-module = <&am43xx_control_usb2phy2>; + syscon-phy-power = <&scm_conf 0x628>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", "refclk"; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 8677f4cce9e9..9551c4713173 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -146,7 +146,11 @@ pinctrl-0 = <&nand_flash_x8>; ranges = <0 0 0x08000000 0x1000000>; nand@0,0 { - reg = <0 0 0>; + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; @@ -166,17 +170,12 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; - gpmc,wait-pin = <0>; - #address-cells = <1>; #size-cells = <1>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 64d43325bcbc..8889be1ca1c3 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -590,8 +590,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; @@ -599,7 +597,7 @@ * 0x264 represents the offset of padconf register of * gpio3_22 from am43xx_pinmux base. */ - interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, <&am43xx_pinmux 0x264>; interrupt-names = "tsc", "wakeup"; @@ -812,9 +810,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -833,11 +835,9 @@ gpmc,access-ns = <30>; gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 746fd2b17958..83dfafaaba1b 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -18,7 +18,7 @@ / { model = "TI AM43x EPOS EVM"; - compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; + compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43"; aliases { display0 = &lcd0; @@ -491,7 +491,7 @@ pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; - interrupts = <17 0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; @@ -561,9 +561,13 @@ status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -582,11 +586,9 @@ gpmc,access-ns = <30>; /* tCEA + 4*/ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 36c0fa6c362a..0a5fc5d02ce2 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -24,7 +24,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x80000000>; + reg = <0x0 0x80000000 0x0 0x80000000>; }; vdd_3v3: fixedregulator-vdd_3v3 { @@ -173,6 +173,8 @@ sound0_master: simple-audio-card,codec { sound-dai = <&tlv320aic3104>; + assigned-clocks = <&clkoutmux2_clk_mux>; + assigned-clock-parents = <&sys_clk2_dclk_div>; clocks = <&clkout2_clk>; }; }; @@ -560,8 +562,7 @@ extcon_usb2: tps659038_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; - ti,enable-id-detection; - id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; }; }; @@ -591,6 +592,11 @@ DRVDD-supply = <&vdd_3v3>; DVDD-supply = <&aic_dvdd>; }; + + eeprom: eeprom@50 { + compatible = "at,24c32"; + reg = <0x50>; + }; }; &i2c3 { @@ -796,6 +802,8 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mcasp3_pins_default>; pinctrl-1 = <&mcasp3_pins_sleep>; + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&sys_clkin2>; status = "okay"; op-mode = <0>; /* MCASP_IIS_MODE */ diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index c53882643ae9..14f912a1b4fd 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -21,7 +21,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */ + reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ }; leds { @@ -167,7 +167,7 @@ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; @@ -492,14 +492,14 @@ pinctrl-names = "default"; pinctrl-0 = <&qspi1_pins>; - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; spi_flash: spi_flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; /* CS0 */ - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; partition@0 { label = "uboot"; @@ -545,7 +545,7 @@ ti,debounce-tol = /bits/ 16 <10>; ti,debounce-rep = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; @@ -559,13 +559,13 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <0>; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; @@ -588,7 +588,7 @@ }; &usb2 { - dr_mode = "peripheral"; + dr_mode = "host"; }; &mcasp3 { diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 77bb8e17401a..988e99632d49 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -25,8 +25,8 @@ &dra7_pmx_core { uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; @@ -108,9 +108,9 @@ pinctrl-0 = <&i2c5_pins_default>; clock-frequency = <400000>; - eeprom_base: atmel@50 { + eeprom_base: atmel@54 { compatible = "atmel,24c08"; - reg = <0x50>; + reg = <0x54>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 1bc64cda819e..652d85b28aaa 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -53,6 +53,14 @@ regulator-boot-on; }; + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -106,6 +114,53 @@ clock-frequency = <0>; }; + flash@30000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x30000000 0x4000000>; + bank-width = <4>; + }; + + fpga_flash@38000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x38000000 0x800000>; + bank-width = <4>; + }; + + /* + * The "secure flash" contains things like the boot + * monitor so we don't want people to accidentally + * screw this up. Mark the device tree node disabled + * by default. + */ + secflash@3c000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x3c000000 0x4000000>; + bank-width = <4>; + status = "disabled"; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet@3a000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x3a000000 0x10000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb@3b000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x3b000000 0x20000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + port1-otg; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -176,6 +231,41 @@ label = "versatile:7"; default-state = "off"; }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; }; /* Primary DevChip GIC synthesized with the CPU */ @@ -297,6 +387,13 @@ clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; + + /* Direct-mapped development chip ROM */ + pb1176_rom@10200000 { + compatible = "direct-mapped"; + reg = <0x10200000 0x4000>; + bank-width = <1>; + }; }; /* These peripherals are inside the FPGA rather than the DevChip */ @@ -306,6 +403,27 @@ compatible = "simple-bus"; ranges; + i2c0: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + fpga_aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + fpga_mci: mmcsd@10005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x10005000 0x1000>; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index da755c9851a7..63d6a051839f 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -230,14 +230,14 @@ flash0@40000000 { /* 2 * 32MiB NOR Flash memory */ - compatible = "arm,vexpress-flash", "cfi-flash"; + compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; }; flash1@44000000 { // 2 * 32MiB NOR Flash memory - compatible = "arm,vexpress-flash", "cfi-flash"; + compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index bb280de511da..2364fc56ae13 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -168,6 +168,33 @@ spi-max-frequency = <50000000>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 3aa980ad64f0..d5e19cd4d256 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -200,7 +200,7 @@ &pinctrl { pwr_led_pin: pwr-led-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; stat_led_pins: stat-led-pins { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index faa474874cb8..11565752b9f6 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -297,7 +297,7 @@ backup_led_pin: backup-led-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; power_led_pin: power-led-pin { diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 836bcc07afc5..8ca7a4340c0f 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -339,7 +339,7 @@ fan_ctrl_high_pin: fan-ctrl-high-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; fan_alarm_pin: fan-alarm-pin { diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 7ccce7529b0c..cc952cf8ec30 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -529,7 +529,7 @@ }; sata@a0000 { - compatible = "marvell,orion-sata"; + compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 14>, <&gateclk 20>; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index acd5b1519edb..2d3fd6e76e2c 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -61,7 +61,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi1: spi@10680 { @@ -134,18 +135,27 @@ }; }; + /* CON3 */ ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; + bm,pool-short = <3>; }; + /* CON2 */ ethernet@34000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; + /* CON4 */ ethernet@70000 { pinctrl-names = "default"; @@ -157,6 +167,13 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <3>; + }; + + bm@c8000 { + status = "okay"; }; nfc: flash@d0000 { @@ -178,6 +195,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index c6e180eb3b11..c60206efb583 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -78,6 +78,9 @@ internal-regs { ethernet@30000 { phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <1>; status = "okay"; fixed-link { @@ -88,6 +91,9 @@ ethernet@34000 { phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + bm,pool-short = <1>; status = "okay"; fixed-link { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index ff47af57f091..ea93ed727030 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -66,7 +66,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi@10600 { @@ -99,6 +100,9 @@ status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; usb@58000 { @@ -109,6 +113,9 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; }; mdio@72004 { @@ -129,6 +136,10 @@ status = "okay"; }; + bm@c8000 { + status = "okay"; + }; + flash@d0000 { status = "okay"; num-cs = <1>; @@ -169,6 +180,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index cd316021d6ce..fd75e5e9550f 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -44,8 +44,8 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Marvell Armada 385 GP"; - compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; + model = "Marvell Armada 388 DB-88F6820-GP"; + compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380"; chosen { stdout-path = "serial0:115200n8"; @@ -60,7 +60,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi@10600 { @@ -133,6 +134,9 @@ status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; /* CON4 */ @@ -152,6 +156,9 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; }; @@ -186,6 +193,10 @@ }; }; + bm@c8000 { + status = "okay"; + }; + sata@e0000 { pinctrl-names = "default"; pinctrl-0 = <&sata2_pins>, <&sata3_pins>; @@ -229,17 +240,21 @@ /* CON5 */ usb3@f0000 { - vcc-supply = <®_usb2_1_vbus>; + usb-phy = <&usb2_1_phy>; status = "okay"; }; /* CON7 */ usb3@f8000 { - vcc-supply = <®_usb3_vbus>; + usb-phy = <&usb3_phy>; status = "okay"; }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; /* @@ -273,13 +288,22 @@ }; }; + usb2_1_phy: usb2_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb2_1_vbus>; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - regulator-always-on; gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; }; @@ -299,7 +323,6 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - regulator-always-on; gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; }; @@ -309,7 +332,7 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; }; @@ -318,7 +341,6 @@ regulator-name = "v5.0-sata0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata0>; }; @@ -327,7 +349,6 @@ regulator-name = "v12.0-sata0"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata0>; }; @@ -337,7 +358,7 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; }; @@ -346,7 +367,6 @@ regulator-name = "v5.0-sata1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata1>; }; @@ -355,7 +375,6 @@ regulator-name = "v12.0-sata1"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata1>; }; @@ -363,7 +382,7 @@ compatible = "regulator-fixed"; regulator-name = "pwr_en_sata2"; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; }; @@ -372,7 +391,6 @@ regulator-name = "v5.0-sata2"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata2>; }; @@ -381,7 +399,6 @@ regulator-name = "v12.0-sata2"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata2>; }; @@ -389,7 +406,7 @@ compatible = "regulator-fixed"; regulator-name = "pwr_en_sata3"; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; }; @@ -398,7 +415,6 @@ regulator-name = "v5.0-sata3"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata3>; }; @@ -407,7 +423,6 @@ regulator-name = "v12.0-sata3"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata3>; }; }; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 3f792a563c05..8c9842237b60 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -58,7 +58,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { ethernet@70000 { @@ -66,6 +67,9 @@ pinctrl-names = "default"; phy = <&phy_dedicated>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; status = "okay"; }; @@ -110,6 +114,15 @@ pinctrl-names = "default"; status = "okay"; }; + + bm@c8000 { + status = "okay"; + }; }; + + bm-bppi { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index e8b7f6726772..3312be6c82cc 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -429,6 +429,27 @@ reg = <0x22000 0x1000>; }; + /* + * As a special exception to the "order by + * register address" rule, the eth0 node is + * placed here to ensure that it gets + * registered as the first interface, since + * the network subsystem doesn't allow naming + * interfaces using DT aliases. Without this, + * the ordering of interfaces is different + * from the one used in U-Boot and the + * labeling of interfaces on the boards, which + * is very confusing for users. + */ + eth0: ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x4000>; + interrupts-extended = <&mpic 8>; + clocks = <&gateclk 4>; + tx-csum-limit = <9800>; + status = "disabled"; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -493,15 +514,6 @@ }; }; - eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x4000>; - interrupts-extended = <&mpic 8>; - clocks = <&gateclk 4>; - tx-csum-limit = <9800>; - status = "disabled"; - }; - mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; @@ -540,6 +552,14 @@ status = "disabled"; }; + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -618,6 +638,17 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 23fc670c0427..5c21b236721f 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -70,8 +70,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f774101416a5..62422a90aeb2 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -76,8 +76,9 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -181,21 +182,33 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + }; + + bm@c0000 { + status = "okay"; }; mvsdio@d4000 { @@ -229,6 +242,38 @@ spi-max-frequency = <20000000>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + + }; + }; + }; + }; + + bm-bppi { + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 4878d7353069..061f4237760e 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -95,8 +95,9 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -196,21 +197,29 @@ status = "okay"; phy = <&phy0>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; /* Front-side USB slot */ @@ -235,6 +244,10 @@ }; }; + bm@c0000 { + status = "okay"; + }; + nand@d0000 { status = "okay"; num-cs = <1>; @@ -243,5 +256,9 @@ nand-on-flash-bbt; }; }; + + bm-bppi { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 13cf69a8d0fb..8af463f26ea1 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -65,8 +65,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; @@ -152,6 +152,7 @@ nand-on-flash-bbt; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 6e9820e141f8..b89e6cf1271a 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -70,8 +70,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 6ab33837a2b6..6522b04f4a8e 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -68,8 +68,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 62175a8848bc..d19f44c70925 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -64,8 +64,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index a5db17782e08..ed3b889d16ce 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -65,9 +65,10 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000 + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -176,21 +177,29 @@ status = "okay"; phy = <&phy0>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; i2c@11000 { status = "okay"; @@ -219,6 +228,14 @@ usb@51000 { status = "okay"; }; + + bm@c0000 { + status = "okay"; + }; + }; + + bm-bppi { + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 2391b11dc546..d17dab0a6f51 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -78,8 +78,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index be23196829bb..553349c07f28 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -253,6 +253,14 @@ marvell,crypto-sram-size = <0x800>; }; + bm: bm@c0000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc0000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 @@ -291,6 +299,17 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts new file mode 100644 index 000000000000..f823ed382ac7 --- /dev/null +++ b/arch/arm/boot/dts/artpec6-devboard.dts @@ -0,0 +1,64 @@ +/* + * Axis ARTPEC-6 development board. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "artpec6.dtsi" + +/ { + model = "ARTPEC-6 development board"; + compatible = "axis,artpec6-dev-board", "axis,artpec6"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +ðernet { + status = "okay"; + + phy-handle = <&phy1>; + phy-mode = "gmii"; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + phy1: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi new file mode 100644 index 000000000000..30430162b886 --- /dev/null +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -0,0 +1,270 @@ +/* + * Device Tree Source for the Axis ARTPEC-6 SoC + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "axis,artpec6"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&pl310>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&pl310>; + }; + }; + + syscon { + compatible = "axis,artpec6-syscon", "syscon"; + reg = <0xf8000000 0x48>; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + psci_version = <0x84000000>; + cpu_on = <0x84000003>; + system_reset = <0x84000009>; + }; + + scu@faf00000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfaf00000 0x58>; + }; + + /* Main external clock driving CPU and peripherals */ + ext_clk: ext_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + /* PLL1 is used by CPU and some peripherals */ + pll1_clk: pll1_clk@f8000000 { + #clock-cells = <0>; + compatible = "axis,artpec6-pll1-clock"; + reg = <0xf8000000 4>; + clocks = <&ext_clk>; + }; + + cpu_clk: cpu_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&pll1_clk>; + clock-output-names = "cpu_clk"; + }; + + cpu_clkdiv2: cpu_clkdiv2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&cpu_clk>; + }; + + cpu_clkdiv4: cpu_clkdiv4 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&cpu_clk>; + }; + + apb_pclk: apb_pclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <8>; + clock-mult = <1>; + clocks = <&cpu_clk>; + clock-output-names = "apb_pclk"; + }; + + /* PLL2 is used by a number of peripherals, including UDL */ + pll2: pll2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <24>; + clocks = <&ext_clk>; + }; + + /* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */ + pll2div2: pll2div2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll2>; + }; + + pll2div12: pll2div12 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <12>; + clock-mult = <1>; + clocks = <&pll2>; + }; + + pll2div24: pll2div24 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&pll2>; + clock-output-names = "uart_clk"; + }; + + + gtimer@faf00200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xfaf00200 0x20>; + interrupts = <GIC_PPI 11 0xf01>; + clocks = <&cpu_clkdiv2>; + }; + + timer@faf00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xfaf00600 0x20>; + interrupts = <GIC_PPI 13 0xf04>; + clocks = <&cpu_clkdiv2>; + status = "disabled"; + }; + + intc: interrupt-controller@faf01000 { + interrupt-controller; + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >; + }; + + pl310: cache-controller@faf10000 { + compatible = "arm,pl310-cache"; + cache-unified; + cache-level = <2>; + reg = <0xfaf10000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <1 1 1>; + arm,filter-ranges = <0x0 0x80000000>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + }; + + amba@0 { + compatible = "simple-bus"; + #address-cells = <0x1>; + #size-cells = <0x1>; + interrupt-parent = <&intc>; + ranges; + dma-ranges = <0x80000000 0x00000000 0x40000000>; + dma-coherent; + + ethernet: ethernet@f8010000 { + clock-names = "phy_ref_clk", "apb_pclk"; + clocks = <&ext_clk>, <&apb_pclk>; + compatible = "snps,dwc-qos-ethernet-4.10"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf8010000 0x4000>; + + snps,write-requests = <2>; + snps,read-requests = <16>; + snps,txpbl = <8>; + snps,rxpbl = <2>; + + status = "disabled"; + }; + + uart0: serial@f8036000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8036000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart1: serial@f8037000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8037000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart2: serial@f8038000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8038000 0x1000>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart3: serial@f8039000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8039000 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 77ddff036409..21c780fab761 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -46,6 +46,7 @@ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -71,11 +72,20 @@ ahb { usb0: gadget@00300000 { + atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; usb1: ohci@00400000 { num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */ + &pioA 42 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; @@ -114,9 +124,15 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_default>; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + }; }; pdmic@f8018000 { @@ -261,7 +277,29 @@ }; }; + adc: adc@fc030000 { + vddana-supply = <&vdd_3v3_lp_reg>; + vref-supply = <&vdd_3v3_lp_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default>; + status = "okay"; + }; + pinctrl@fc038000 { + /* + * There is no real pinmux for ADC, if the pin + * is not requested by another peripheral then + * the muxing is done when channel is enabled. + * Requesting pins for ADC is GPIO is + * encouraged to prevent conflicts and to + * disable bias in order to be in the same + * state when the pin is not muxed to the adc. + */ + pinctrl_adc_default: adc_default { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PB28__FLEXCOM0_IO0>, <PIN_PB29__FLEXCOM0_IO1>; @@ -286,6 +324,18 @@ bias-disable; }; + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PB9__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PB0__GPIO>, + <PIN_PB5__GPIO>, + <PIN_PB6__GPIO>; + bias-pull-up; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PB14__GTXCK>, <PIN_PB15__GTXEN>, @@ -300,6 +350,11 @@ bias-disable; }; + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PC9__GPIO>; + bias-disable; + }; + pinctrl_pdmic_default: pdmic_default { pinmux = <PIN_PB26__PDMIC_DAT>, <PIN_PB27__PDMIC_CLK>; @@ -365,7 +420,54 @@ <PIN_PB12__UTXD3>; bias-disable; }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PB10__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA31__GPIO>; + bias-disable; + }; + }; }; }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + bp1 { + label = "PB_USER"; + gpios = <&pioA 41 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + red { + label = "red"; + gpios = <&pioA 38 GPIO_ACTIVE_LOW>; + }; + + green { + label = "green"; + gpios = <&pioA 37 GPIO_ACTIVE_LOW>; + }; + + blue { + label = "blue"; + gpios = <&pioA 32 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index ff888d21c786..f3e2b96c06a3 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -303,6 +303,7 @@ regulator-name = "mmc0-card-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; gpio_keys { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 131614f28e75..da84e65b56ef 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -86,10 +86,12 @@ macb0: ethernet@f8020000 { phy-mode = "rmii"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy0: ethernet-phy@1 { interrupt-parent = <&pioE>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; reg = <1>; }; }; @@ -152,6 +154,10 @@ atmel,pins = <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; + pinctrl_macb0_phy_irq: macb0_phy_irq_0 { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; }; }; }; @@ -262,5 +268,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_3v3_reg>; + regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 2d4a33100af6..4e98cda97403 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -160,8 +160,15 @@ }; macb0: ethernet@f8020000 { + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; }; mmc1: mmc@fc000000 { @@ -193,6 +200,10 @@ pinctrl@fc06a000 { board { + pinctrl_macb0_phy_irq: macb0_phy_irq { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index ca4ddf86817a..626c67d66626 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -215,7 +215,7 @@ }; panel: panel { - compatible = "qd,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40", "simple-panel"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi index ea288f0a1d39..a9d6d593fc8a 100644 --- a/arch/arm/boot/dts/axm55xx.dtsi +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -107,7 +107,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi index 32bcd45ef22b..80b6ba4ca50c 100644 --- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi @@ -121,4 +121,13 @@ clocks { clocks = <&osc>; clock-output-names = "keypad", "adc/touch", "pwm"; }; + + audiopll: audiopll { + #clock-cells = <1>; + compatible = "brcm,cygnus-audiopll"; + reg = <0x180aeb00 0x68>; + clocks = <&osc>; + clock-output-names = "audiopll", "ch0_audio", + "ch1_audio", "ch2_audio"; + }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 10bdef557ba0..def9e783b5c6 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -45,14 +45,14 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; @@ -62,24 +62,19 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + mpcore { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; #size-cells = <1>; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0x0>; - }; - }; - a9pll: arm_clk@00000 { #clock-cells = <0>; compatible = "brcm,nsp-armpll"; @@ -169,6 +164,18 @@ #address-cells = <1>; #size-cells = <1>; + gpioa: gpio@0020 { + compatible = "brcm,nsp-gpio-a"; + reg = <0x0020 0x70>, + <0x3f1c4 0x1c>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <32>; + interrupt-controller; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + uart0: serial@0300 { compatible = "ns16550a"; reg = <0x0300 0x100>; @@ -185,78 +192,6 @@ status = "disabled"; }; - pcie0: pcie@12000 { - compatible = "brcm,iproc-pcie"; - reg = <0x12000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; - - status = "disabled"; - }; - - pcie1: pcie@13000 { - compatible = "brcm,iproc-pcie"; - reg = <0x13000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; - - status = "disabled"; - }; - - pcie2: pcie@14000 { - compatible = "brcm,iproc-pcie"; - reg = <0x14000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; - - linux,pci-domain = <2>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; - - status = "disabled"; - }; - nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -271,6 +206,24 @@ brcm,nand-has-wp; }; + ccbtimer0: timer@34000 { + compatible = "arm,sp804"; + reg = <0x34000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + + ccbtimer1: timer@35000 { + compatible = "arm,sp804"; + reg = <0x35000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + i2c0: i2c@38000 { compatible = "brcm,iproc-i2c"; reg = <0x38000 0x50>; @@ -280,6 +233,14 @@ clock-frequency = <100000>; }; + watchdog@39000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x39000 0x1000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "wdogclk", "apb_pclk"; + }; + lcpll0: lcpll0@3f100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; @@ -306,4 +267,76 @@ <0x3f408 0x04>; }; }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie2: pcie@18014000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18014000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + + linux,pci-domain = <2>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; + + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts new file mode 100644 index 000000000000..ddbbbbd42dda --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -0,0 +1,24 @@ +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-a", "brcm,bcm2835"; + model = "Raspberry Pi Model A"; + + leds { + act { + gpios = <&gpio 16 1>; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + + /* I2S interface */ + i2s_alt2: i2s_alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 3afb9fefe2d1..76bdbcafab18 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/power/raspberrypi-power.h> + / { memory { reg = <0 0x10000000>; @@ -18,6 +20,12 @@ compatible = "raspberrypi,bcm2835-firmware"; mboxes = <&mailbox>; }; + + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; }; }; @@ -58,3 +66,11 @@ status = "okay"; bus-width = <4>; }; + +&pwm { + status = "okay"; +}; + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 971e741e5467..8aaf193711bf 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/pinctrl/bcm2835.h> #include <dt-bindings/clock/bcm2835.h> +#include <dt-bindings/clock/bcm2835-aux.h> #include "skeleton.dtsi" /* This include file covers the common peripherals and configuration between @@ -111,7 +112,7 @@ #interrupt-cells = <2>; }; - uart0: uart@7e201000 { + uart0: serial@7e201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; @@ -159,6 +160,44 @@ clocks = <&clocks BCM2835_CLOCK_VPU>; }; + uart1: serial@7e215040 { + compatible = "brcm,bcm2835-aux-uart"; + reg = <0x7e215040 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_UART>; + status = "disabled"; + }; + + spi1: spi@7e215080 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e215080 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@7e2150c0 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e2150c0 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@7e20c000 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c000 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + sdhci: sdhci@7e300000 { compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; @@ -187,7 +226,7 @@ status = "disabled"; }; - usb@7e980000 { + usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts new file mode 100644 index 000000000000..6c83538bc2d7 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -0,0 +1,111 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for D-Link DIR-885L + * + * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; + model = "D-Link DIR-885L"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + nand: nand@18028000 { + nandcs@0 { + partition@0 { + label = "firmware"; + reg = <0x00000000 0x08000000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + /* Switch: router / extender */ + extender { + label = "Extender"; + linux,code = <BTN_0>; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; + clock-frequency = <125000000>; +}; diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi index 4e42f30cb318..c0451051777e 100644 --- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -55,6 +55,7 @@ MATRIX_KEY(0x03, 0x04, KEY_F5) MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x09, KEY_F13) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index e070862b1038..cbc17b0794b1 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dm814x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DM8148 EVM"; @@ -35,6 +36,63 @@ phy-mode = "rgmii"; }; +&gpmc { + ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16aadwp"; + #address-cells = <1>; + #size-cells = <1>; + ti,nand-ecc-opt = "bch8"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0xf880000>; + }; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index 26001585673a..e0ea6a93a22e 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -41,11 +41,11 @@ reg = <0x0040>; }; - /* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */ + /* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */ auxosc_ck: auxosc_ck { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <27000000>; + clock-frequency = <22572900>; }; /* Optional 32768Hz crystal or clock on RTCOSC pins */ diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index a25cd51e39ab..4a6ce8c8bf8f 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -305,6 +305,13 @@ reg = <0x60000 0x1000>; }; + rtc: rtc@c0000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0xc0000 0x1000>; + interrupts = <75 76>; + ti,hwmods = "rtc"; + }; + mmc2: mmc@1d8000 { compatible = "ti,omap4-hsmmc"; ti,hwmods = "mmc2"; @@ -548,6 +555,20 @@ reg-names = "gmii-sel"; }; }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + ti,no-idle-on-init; + reg = <0x50000000 0x2000>; + interrupts = <100>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 169a85578fc9..f50348bdd857 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dm816x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DM8168 EVM"; @@ -85,8 +86,12 @@ ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; linux,mtd-name= "micron,mt29f2g16aadwp"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; @@ -106,12 +111,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; partition@0 { diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index c3b8811a3e58..d9309a016117 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -183,6 +183,8 @@ dma-names = "rxtx"; gpmc,num-cs = <6>; gpmc,num-waitpins = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; i2c1: i2c@48028000 { @@ -214,6 +216,13 @@ reg = <0x48200000 0x1000>; }; + rtc: rtc@480c0000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0x480c0000 0x1000>; + interrupts = <75 76>; + ti,hwmods = "rtc"; + }; + mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480c8000 0x2000>; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 79008069020d..f820573f4a4a 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dra62x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DRA62x J5 Eco EVM"; @@ -35,6 +36,63 @@ phy-mode = "rgmii"; }; +&gpmc { + ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16aadwp"; + #address-cells = <1>; + #size-cells = <1>; + ti,nand-ecc-opt = "bch8"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0xf880000>; + }; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi new file mode 100644 index 000000000000..1c39a8459b39 --- /dev/null +++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for DRA7x SoC DSPEVE thermal + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +dspeve_thermal: dspeve_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 3>; + + trips { + dspeve_crit: dspeve_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index cfc24e52244e..d9b87236019d 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -18,7 +18,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x60000000>; /* 1536 MB */ + reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; evm_3v3_sd: fixedregulator-sd { @@ -741,9 +741,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x16>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -766,7 +770,6 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi new file mode 100644 index 000000000000..dd74a5337d1f --- /dev/null +++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for DRA7x SoC IVA thermal + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +iva_thermal: iva_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 4>; + + trips { + iva_crit: iva_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c4d9175b90dc..13ac88279427 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -15,8 +15,8 @@ #define MAX_SOURCES 400 / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; @@ -57,10 +57,10 @@ compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>, - <0x48214000 0x2000>, - <0x48216000 0x2000>; + reg = <0x0 0x48211000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48214000 0x0 0x2000>, + <0x0 0x48216000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; interrupt-parent = <&gic>; }; @@ -69,7 +69,7 @@ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48281000 0x1000>; + reg = <0x0 0x48281000 0x0 0x1000>; interrupt-parent = <&gic>; }; @@ -96,10 +96,10 @@ compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0xc0000000>; ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x44000000 0x1000000>, - <0x45000000 0x1000>; + reg = <0x0 0x44000000 0x0 0x1000000>, + <0x0 0x45000000 0x0 0x1000>; interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -156,6 +156,11 @@ compatible = "syscon"; reg = <0x1c04 0x0020>; }; + + scm_conf_pcie: scm_conf@1c24 { + compatible = "syscon"; + reg = <0x1c24 0x0024>; + }; }; cm_core_aon: cm_core_aon@5000 { @@ -1168,14 +1173,6 @@ status = "disabled"; }; - omap_control_sata: control-phy@4a002374 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002374 0x4>; - reg-names = "power"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - }; - /* OCP2SCP3 */ ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp"; @@ -1190,7 +1187,7 @@ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_sata>; + syscon-phy-power = <&scm_conf 0x374>; clocks = <&sys_clkin1>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; syscon-pllreset = <&scm_conf 0x3fc>; @@ -1202,16 +1199,18 @@ reg = <0x4a094000 0x80>, /* phy_rx */ <0x4a094400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; - ctrl-module = <&omap_control_pcie1phy>; + syscon-phy-power = <&scm_conf_pcie 0x1c>; + syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy1_32khz>, <&optfclk_pciephy1_clk>, <&optfclk_pciephy1_div_clk>, - <&optfclk_pciephy_div>; + <&optfclk_pciephy_div>, + <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", - "div-clk", "phy-div"; + "div-clk", "phy-div", "sysclk"; #phy-cells = <0>; }; @@ -1220,16 +1219,18 @@ reg = <0x4a095000 0x80>, /* phy_rx */ <0x4a095400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; - ctrl-module = <&omap_control_pcie2phy>; + syscon-phy-power = <&scm_conf_pcie 0x20>; + syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy2_32khz>, <&optfclk_pciephy2_clk>, <&optfclk_pciephy2_div_clk>, - <&optfclk_pciephy_div>; + <&optfclk_pciephy_div>, + <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", - "div-clk", "phy-div"; + "div-clk", "phy-div", "sysclk"; #phy-cells = <0>; status = "disabled"; }; @@ -1245,23 +1246,6 @@ ti,hwmods = "sata"; }; - omap_control_pcie1phy: control-phy@0x4a003c40 { - compatible = "ti,control-phy-pcie"; - reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; - reg-names = "power", "control_sma", "pcie_pcs"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - }; - - omap_control_pcie2phy: control-pcie@0x4a003c44 { - compatible = "ti,control-phy-pcie"; - reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; - reg-names = "power", "control_sma", "pcie_pcs"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - status = "disabled"; - }; - rtc: rtc@48838000 { compatible = "ti,am3352-rtc"; reg = <0x48838000 0x100>; @@ -1271,24 +1255,6 @@ clocks = <&sys_32k_ck>; }; - omap_control_usb2phy1: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usb3phy1: control-phy@4a002370 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002370 0x4>; - reg-names = "power"; - }; - - omap_control_usb2phy2: control-phy@0x4a002e74 { - compatible = "ti,control-phy-usb2-dra7"; - reg = <0x4a002e74 0x4>; - reg-names = "power"; - }; - /* OCP2SCP1 */ ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; @@ -1301,7 +1267,7 @@ usb2_phy1: phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x400>; - ctrl-module = <&omap_control_usb2phy1>; + syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", @@ -1310,9 +1276,10 @@ }; usb2_phy2: phy@4a085000 { - compatible = "ti,omap-usb2"; + compatible = "ti,dra7x-usb2-phy2", + "ti,omap-usb2"; reg = <0x4a085000 0x400>; - ctrl-module = <&omap_control_usb2phy2>; + syscon-phy-power = <&scm_conf 0xe74>; clocks = <&usb_phy2_always_on_clk32k>, <&usb_otg_ss2_refclk960m>; clock-names = "wkupclk", @@ -1326,7 +1293,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb3phy1>; + syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, <&usb_otg_ss1_refclk960m>; @@ -1357,7 +1324,6 @@ "otg"; phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; maximum-speed = "super-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1385,7 +1351,6 @@ "otg"; phys = <&usb2_phy2>; phy-names = "usb2-phy"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1413,7 +1378,6 @@ interrupt-names = "peripheral", "host", "otg"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1438,6 +1402,8 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; @@ -1500,6 +1466,16 @@ 0x48485200 0x2E00>; #address-cells = <1>; #size-cells = <1>; + + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; + /* * rx_thresh_pend * rx_pend @@ -1603,6 +1579,8 @@ #include "omap4-cpu-thermal.dtsi" #include "omap5-gpu-thermal.dtsi" #include "omap5-core-thermal.dtsi" + #include "dra7-dspeve-thermal.dtsi" + #include "dra7-iva-thermal.dtsi" }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 00b12002c07c..6affe2d137da 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -17,7 +17,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1024 MB */ + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; aliases { @@ -492,13 +492,17 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_default>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: * SW5.1 (NAND_SELn) = ON (LOW) * SW5.9 (GPMC_WPN) = OFF (HIGH) */ + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -521,7 +525,6 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 8bcc47db1cd1..4220eeffc65a 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -76,7 +76,6 @@ interrupt-names = "peripheral", "host", "otg"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 357bedeebfac..d0bae06b7eb7 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -2146,4 +2146,28 @@ ti,bit-shift = <0>; reg = <0x558>; }; + + ehrpwm0_tbclk: ehrpwm0_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <20>; + reg = <0x0558>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <21>; + reg = <0x0558>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <22>; + reg = <0x0558>; + }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 57795da616cb..bcce6f50c93d 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -9,6 +9,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -53,8 +54,8 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; clocks@e0110000 { @@ -158,7 +159,7 @@ timer@e0180000 { compatible = "renesas,em-sti"; reg = <0xe0180000 0x54>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sti_sclk>; clock-names = "sclk"; }; @@ -166,7 +167,7 @@ uart0: serial@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usia_u0_sclk>; clock-names = "sclk"; }; @@ -174,7 +175,7 @@ uart1: serial@e1030000 { compatible = "renesas,em-uart"; reg = <0xe1030000 0x38>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u1_sclk>; clock-names = "sclk"; }; @@ -182,7 +183,7 @@ uart2: serial@e1040000 { compatible = "renesas,em-uart"; reg = <0xe1040000 0x38>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u2_sclk>; clock-names = "sclk"; }; @@ -190,7 +191,7 @@ uart3: serial@e1050000 { compatible = "renesas,em-uart"; reg = <0xe1050000 0x38>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u3_sclk>; clock-names = "sclk"; }; @@ -203,8 +204,8 @@ gpio0: gpio@e0050000 { compatible = "renesas,em-gio"; reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>, - <0 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; #gpio-cells = <2>; @@ -215,8 +216,8 @@ gpio1: gpio@e0050080 { compatible = "renesas,em-gio"; reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; #gpio-cells = <2>; @@ -227,8 +228,8 @@ gpio2: gpio@e0050100 { compatible = "renesas,em-gio"; reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; - interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, - <0 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; #gpio-cells = <2>; @@ -239,8 +240,8 @@ gpio3: gpio@e0050180 { compatible = "renesas,em-gio"; reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, - <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; #gpio-cells = <2>; @@ -251,8 +252,8 @@ gpio4: gpio@e0050200 { compatible = "renesas,em-gio"; reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>, - <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 128 31>; #gpio-cells = <2>; @@ -266,7 +267,7 @@ #size-cells = <0>; compatible = "renesas,iic-emev2"; reg = <0xe0070000 0x28>; - interrupts = <0 32 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; clocks = <&iic0_sclk>; clock-names = "sclk"; status = "disabled"; @@ -277,7 +278,7 @@ #size-cells = <0>; compatible = "renesas,iic-emev2"; reg = <0xe10a0000 0x28>; - interrupts = <0 33 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>; clocks = <&iic1_sclk>; clock-names = "sclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi new file mode 100644 index 000000000000..09a2040054ed --- /dev/null +++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi @@ -0,0 +1,27 @@ +/* + * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + soc { + compatible = "simple-bus"; + + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 443a35085846..9e2840b59ae8 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -43,7 +43,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -67,7 +67,7 @@ interrupt-parent = <&gpx1>; interrupts = <5 0>; reg = <0x25>; - wakeup; + wakeup-source; muic: max77836-muic { compatible = "maxim,max77836-muic"; @@ -185,7 +185,7 @@ interrupt-parent = <&gpx0>; interrupts = <7 0>; reg = <0x66>; - wakeup; + wakeup-source; s2mps14_osc: clocks { compatible = "samsung,s2mps14-clk"; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 3e64d5dcdd60..1f102f3a1ab1 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -43,7 +43,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -58,7 +58,7 @@ interrupt-parent = <&gpx1>; interrupts = <5 0>; reg = <0x25>; - wakeup; + wakeup-source; muic: max77836-muic { compatible = "maxim,max77836-muic"; @@ -246,7 +246,7 @@ interrupt-parent = <&gpx0>; interrupts = <7 0>; reg = <0x66>; - wakeup; + wakeup-source; s2mps14_osc: clocks { compatible = "samsung,s2mps14-clk"; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 18e3deffbf48..137f9015d4e8 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -19,6 +19,7 @@ #include "skeleton.dtsi" #include "exynos4-cpu-thermal.dtsi" +#include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos3250.h> / { @@ -152,20 +153,6 @@ interrupt-parent = <&gic>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* Reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; @@ -381,7 +368,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 045785c44c04..c679b3cc3c48 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -22,6 +22,7 @@ #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/clock/exynos-audss-clk.h> #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" / { interrupt-parent = <&gic>; @@ -76,6 +77,11 @@ reg = <0x10000000 0x100>; }; + sromc@12570000 { + compatible = "samsung,exynos-srom"; + reg = <0x12570000 0x14>; + }; + mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; @@ -158,20 +164,6 @@ interrupt-parent = <&gic>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; @@ -661,7 +653,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 5821ad87e32c..ad7394c1d67a 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -60,35 +60,35 @@ label = "Up"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; - gpio-key,wakeup; + wakeup-source; }; down { label = "Down"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; }; back { label = "Back"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; - gpio-key,wakeup; + wakeup-source; }; home { label = "Home"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; - gpio-key,wakeup; + wakeup-source; }; menu { label = "Menu"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 104cbb33d2bb..94ca7d36ab37 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -66,7 +66,7 @@ samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&keypad_rows &keypad_cols>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a50be640f1b0..1df2f0bc1d76 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -112,7 +112,7 @@ linux,code = <116>; label = "power"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; ok-key { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 4f5d37920c8d..9a75e3effbc9 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -92,7 +92,7 @@ linux,code = <171>; label = "config"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; camera-key { @@ -107,7 +107,7 @@ linux,code = <116>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; ok-key { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 395c3ca9601e..5e5d3fecb04c 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -35,7 +35,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index b44bb682e976..bf7b21b817e4 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -48,7 +48,7 @@ linux,code = <KEY_HOME>; label = "home key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 9e2e24c6177a..8bca699b7f20 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -423,7 +423,7 @@ samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <2>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-0 = <&keypad_rows &keypad_cols>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a130ab39fa77..a51069f3c03b 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -45,7 +45,7 @@ samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-0 = <&keypad_rows &keypad_cols>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index a6f78c3da935..ed017cc7b14f 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -119,7 +119,7 @@ linux,code = <116>; label = "power"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; key-ok { @@ -127,7 +127,7 @@ linux,code = <139>; label = "ok"; debounce-inteval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi index ad764842fff5..28b04b6795c9 100644 --- a/arch/arm/boot/dts/exynos4415.dtsi +++ b/arch/arm/boot/dts/exynos4415.dtsi @@ -380,7 +380,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index e2439e87ee4a..92313cac035e 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -14,6 +14,7 @@ */ #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" / { interrupt-parent = <&gic>; @@ -30,6 +31,11 @@ reg = <0x10000000 0x100>; }; + sromc@12250000 { + compatible = "samsung,exynos-srom"; + reg = <0x12250000 0x14>; + }; + combiner: interrupt-controller@10440000 { compatible = "samsung,exynos4210-combiner"; #interrupt-cells = <2>; @@ -88,20 +94,6 @@ status = "disabled"; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - fimd: fimd@14400000 { compatible = "samsung,exynos5250-fimd"; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index c000532c1444..8b2acc74aa76 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -34,42 +34,42 @@ label = "SW-TACT2"; gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; - gpio-key,wakeup; + wakeup-source; }; home { label = "SW-TACT3"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; - gpio-key,wakeup; + wakeup-source; }; up { label = "SW-TACT4"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; - gpio-key,wakeup; + wakeup-source; }; down { label = "SW-TACT5"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; }; back { label = "SW-TACT6"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; - gpio-key,wakeup; + wakeup-source; }; wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 5cb33ba5e296..95210ef6a6b5 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -37,7 +37,7 @@ label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -46,7 +46,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index c1edd6d038a9..0f500cb1eb2d 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -37,7 +37,7 @@ label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -46,7 +46,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 33e2d5f7315b..e653ae04015a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -674,7 +674,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; @@ -807,7 +807,7 @@ sss@10830000 { compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x10000>; + reg = <0x10830000 0x300>; interrupts = <0 112 0>; clocks = <&clock CLK_SSS>; clock-names = "secss"; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi new file mode 100644 index 000000000000..f9aa6bb55464 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -0,0 +1,406 @@ +/* + * Exynos5410 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Hardkernel Co., Ltd. + * http://www.hardkernel.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm5: gpm5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm7: gpm7 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy7: gpy7 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, + <24 0>, + <25 0>, + <25 1>, + <26 0>, + <26 1>, + <27 0>, + <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, + <28 1>, + <29 0>, + <29 1>, + <30 0>, + <30 1>, + <31 0>, + <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_1 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_2 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_3 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index cebeaab3abec..a731fbe28ebc 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5410.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung SMDK5410 board based on EXYNOS5410"; compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; @@ -61,6 +62,46 @@ disable-wp; }; +&pinctrl_0 { + srom_ctl: srom-ctl { + samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5", + "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3"; + samsung,pin-function = <2>; + samsung,pin-drv = <0>; + }; + + srom_ebi: srom-ebi { + samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3", + "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7", + "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3", + "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7", + "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3", + "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&sromc { + pinctrl-names = "default"; + pinctrl-0 = <&srom_ctl>, <&srom_ebi>; + + ethernet@3,0 { + compatible = "smsc,lan9115"; + reg = <3 0 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpx0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reg-io-width = <2>; + smsc,irq-push-pull; + smsc,force-internal-phy; + + samsung,srom-page-mode = <1>; + samsung,srom-timing = <9 12 1 9 1 1>; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index fad0779b1b6e..fa558674ac76 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -14,6 +14,7 @@ */ #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos5410.h> / { @@ -21,6 +22,10 @@ interrupt-parent = <&gic>; aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -97,25 +102,22 @@ reg = <0x10000000 0x100>; }; + sromc: sromc@12250000 { + compatible = "samsung,exynos-srom"; + reg = <0x12250000 0x14>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x04000000 0x20000 + 1 0 0x05000000 0x20000 + 2 0 0x06000000 0x20000 + 3 0 0x07000000 0x20000>; + }; + pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5410-pmu", "syscon"; reg = <0x10040000 0x5000>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0xB00>; @@ -205,6 +207,36 @@ status = "disabled"; }; + pinctrl_0: pinctrl@13400000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@14000000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x14000000 0x1000>; + interrupts = <0 46 0>; + }; + + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_3: pinctrl@03860000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; + uart0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; @@ -233,3 +265,5 @@ }; }; }; + +#include "exynos5410-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 4ecef6981d5c..a103ce8c3985 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> @@ -47,11 +48,19 @@ label = "SW-TACT1"; gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; - gpio-key,wakeup; + wakeup-source; }; }; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &usbdrd_dwc3_1 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi new file mode 100644 index 000000000000..5c052d7ff554 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -0,0 +1,126 @@ +/* + * SAMSUNG EXYNOS5420 SoC cpu device tree source + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This file provides desired ordering for Exynos5420 and Exynos5800 + * boards: CPU[0123] being the A15. + * + * The Exynos5420, 5422 and 5800 actually share the same CPU configuration + * but particular boards choose different booting order. + * + * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422 + * booting cluster (big or LITTLE) is chosen by IROM code by reading + * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting + * from the LITTLE: Cortex-A7. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + clocks = <&clock CLK_ARM_CLK>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clocks = <&clock CLK_KFC_CLK>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 35cfb07dc4bb..3981ddb25036 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -15,6 +15,7 @@ #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" / { model = "Google Peach Pit Rev 6+"; @@ -64,7 +65,7 @@ label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -73,7 +74,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -143,6 +144,14 @@ vdd-supply = <&ldo9_reg>; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index ac35aefd320f..0785fedf441e 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -89,6 +90,14 @@ }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 48a0a55314f5..7b99cb58d82d 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -50,75 +50,121 @@ usbdrdphy1 = &usbdrd_phy1; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + cluster_a15_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; }; - - cpu4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; }; - - cpu5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; }; - - cpu6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; + }; + }; - cpu7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + cluster_a7_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; }; }; + /* + * The 'cpus' node is not present here but instead it is provided + * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. + */ + cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; @@ -252,8 +298,10 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; - clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; - clock-names = "asb0", "asb1"; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK300_GSCL>, + <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; + clock-names = "oscclk", "clk0", "asb0", "asb1"; }; isp_pd: power-domain@10044020 { @@ -327,7 +375,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; @@ -859,7 +907,7 @@ sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x10000>; + reg = <0x10830000 0x300>; interrupts = <0 112 0>; clocks = <&clock CLK_SSS>; clock-names = "secss"; diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi index 2b289d7c0d13..3e4c4ad96d63 100644 --- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi @@ -16,7 +16,7 @@ thermal-zones { cpu0_thermal: cpu0-thermal { thermal-sensors = <&tmu_cpu0 0>; - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; trips { cpu_alert0: cpu-alert-0 { @@ -39,6 +39,23 @@ hysteresis = <0>; /* millicelsius */ type = "critical"; }; + /* + * Exyunos542x support only 4 trip-points + * so for these polling mode is required. + * Start polling at temperature level of last + * interrupt-driven trip: cpu_alert2 + */ + cpu_alert3: cpu-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert4: cpu-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + }; cooling-maps { map0 { @@ -53,6 +70,33 @@ trip = <&cpu_alert2>; cooling-device = <&fan0 2 3>; }; + /* + * When reaching cpu_alert3, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1500 MHz and 1100 MHz. + */ + map3 { + trip = <&cpu_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu_alert3>; + cooling-device = <&cpu4 0 2>; + }; + + /* + * When reaching cpu_alert4, reduce CPU + * further, down to 600 MHz (11 steps for big, + * 7 steps for LITTLE). + */ + map5 { + trip = <&cpu_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu_alert4>; + cooling-device = <&cpu4 3 11>; + }; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index b7f60c855459..bf3c6f1ec4ee 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -4,78 +4,122 @@ * Copyright (c) 2015 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The - * EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting - * from Cortex-A15 core. + * This file provides desired ordering for Exynos5422: CPU[0123] being the A7. * - * EXYNOS5422 based board files can include this file to provide cpu ordering - * which could boot a cortex-a7 from cpu0. + * The Exynos5420, 5422 and 5800 actually share the same CPU configuration + * but particular boards choose different booting order. + * + * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422 + * booting cluster (big or LITTLE) is chosen by IROM code by reading + * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting + * from the LITTLE: Cortex-A7. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&cpu0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; -&cpu1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clocks = <&clock CLK_KFC_CLK>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu4 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu5 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + clocks = <&clock CLK_ARM_CLK>; + reg = <0x0>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu6 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu7 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + cpu7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 9134217446b8..1bd507bfa750 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -67,6 +67,14 @@ <19200000>; }; +&cpu0 { + cpu-supply = <&buck6_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + &hdmi { status = "okay"; hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f18b51f2eeaa..b9342ec5b9cf 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -200,7 +200,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 064176f201e7..6e9edc1610c4 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -15,6 +15,7 @@ #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" +#include "exynos5420-cpus.dtsi" / { model = "Google Peach Pi Rev 10+"; @@ -63,7 +64,7 @@ label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -72,7 +73,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -143,6 +144,14 @@ vdd-supply = <&ldo9_reg>; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index c0bb3563cac1..8213016803e5 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -23,6 +23,114 @@ compatible = "samsung,exynos5800-clock"; }; +&cluster_a15_opp_table { + opp@1700000000 { + opp-microvolt = <1250000>; + }; + opp@1600000000 { + opp-microvolt = <1250000>; + }; + opp@1500000000 { + opp-microvolt = <1100000>; + }; + opp@1400000000 { + opp-microvolt = <1100000>; + }; + opp@1300000000 { + opp-microvolt = <1100000>; + }; + opp@1200000000 { + opp-microvolt = <1000000>; + }; + opp@1100000000 { + opp-microvolt = <1000000>; + }; + opp@1000000000 { + opp-microvolt = <1000000>; + }; + opp@900000000 { + opp-microvolt = <1000000>; + }; + opp@800000000 { + opp-microvolt = <900000>; + }; + opp@700000000 { + opp-microvolt = <900000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; +}; + +&cluster_a7_opp_table { + opp@1300000000 { + opp-microvolt = <1250000>; + }; + opp@1200000000 { + opp-microvolt = <1250000>; + }; + opp@1100000000 { + opp-microvolt = <1250000>; + }; + opp@1000000000 { + opp-microvolt = <1100000>; + }; + opp@900000000 { + opp-microvolt = <1100000>; + }; + opp@800000000 { + opp-microvolt = <1100000>; + }; + opp@700000000 { + opp-microvolt = <1000000>; + }; + opp@600000000 { + opp-microvolt = <1000000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; +}; + &mfc { compatible = "samsung,mfc-v8"; }; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index 6cbb62e5c6a9..c85d07e6db61 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -68,7 +68,7 @@ #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges = <0 0xfc000000 0x2000000>; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 33130f8461c3..4e9562f806a2 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -43,7 +43,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; uart0: uart@10001000 { diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index c52722b14e4a..fdcc23d203e5 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -34,7 +34,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; timer0: timer@00002000 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 1c6c07538a78..302d1168f424 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -569,7 +569,7 @@ }; }; - iio_hwmon { + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index ed1d0b4578ef..cda6907a27b9 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -30,7 +30,7 @@ label = "BP1"; gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index cde329e9b9e3..6b1f4bbe6ec6 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -269,13 +269,36 @@ status = "disabled"; }; - tsc: tsc@50030000 { - compatible = "fsl,imx25-adc", "fsl,imx21-tsc"; - reg = <0x50030000 0x4000>; + tscadc: tscadc@50030000 { + compatible = "fsl,imx25-tsadc"; + reg = <0x50030000 0xc>; interrupts = <46>; clocks = <&clks 119>; clock-names = "ipg"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; status = "disabled"; + + adc: adc@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + tsc: tcq@50030400 { + compatible = "fsl,imx25-tcq"; + reg = <0x50030400 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <0>; + fsl,wires = <4>; + status = "disabled"; + }; }; ssi1: ssi@50034000 { @@ -497,7 +520,8 @@ compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 70>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 0>; fsl,usbphy = <&usbphy0>; status = "disabled"; @@ -507,7 +531,8 @@ compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 70>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; status = "disabled"; @@ -516,8 +541,6 @@ usbmisc: usbmisc@53ff4600 { #index-cells = <1>; compatible = "fsl,imx25-usbmisc"; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; reg = <0x53ff4600 0x00f>; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 7ac4f1af16ac..1eaa131e2d18 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -225,7 +225,7 @@ label = "User button"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 927b391d2058..88594747f454 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -36,7 +36,7 @@ label = "SW3"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -49,7 +49,7 @@ label = "SW4"; gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 4ea89344a5ff..fd20e99c777e 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -130,7 +130,7 @@ compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <26000000>; }; }; @@ -202,7 +202,7 @@ 0x02020049 /* row 2, col 2, KEY_KP9 */ >; gpio-activelow; - linux,wakeup; + wakeup-source; debounce-delay-ms = <100>; col-scan-delay-us = <5000>; linux,no-autorepeat; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index fae7b9069fc4..f637ec900cc8 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1256,7 +1256,7 @@ }; }; - iio_hwmon { + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index 75b036700d31..4727bbb804e1 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -30,7 +30,7 @@ label = "BP1"; gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; linux,input-type = <1>; }; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index ed3dc3391d1c..14e1320d9f84 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -305,7 +305,8 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 73>; + clocks = <&clks 9>, <&clks 73>, <&clks 28>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 0>; fsl,usbphy = <&usbphy0>; status = "disabled"; @@ -315,7 +316,8 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 73>; + clocks = <&clks 9>, <&clks 73>, <&clks 28>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; dr_mode = "host"; @@ -325,8 +327,6 @@ usbmisc: usbmisc@53ff4600 { #index-cells = <1>; compatible = "fsl,imx35-usbmisc"; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; reg = <0x53ff4600 0x00f>; }; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 649befeb2cf9..018d24eb9965 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -107,7 +107,7 @@ label = "Power Button"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 321662f53e33..16fc69c69ab2 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -156,7 +156,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; cap-sdio-irq; - enable-sdio-wakeup; + wakeup-source; keep-power-in-suspend; max-frequency = <50000000>; no-1-8-v; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 34599c547459..d270df3e5891 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -41,7 +41,7 @@ label = "BP1"; gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; linux,code = <256>; - gpio-key,wakeup; + wakeup-source; linux,input-type = <1>; }; }; diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h index 9eb92abaeb6d..82eae3c8a3ce 100644 --- a/arch/arm/boot/dts/imx51-pinfunc.h +++ b/arch/arm/boot/dts/imx51-pinfunc.h @@ -536,7 +536,6 @@ #define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 0x2c4 0x6c4 0x000 0x3 0x0 #define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK 0x2c4 0x6c4 0x000 0x0 0x0 #define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 0x2c4 0x6c4 0x990 0x4 0x1 -#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK 0x2c8 0x6c8 0x000 0x2 0x0 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 0x2c8 0x6c8 0x000 0x2 0x0 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 0x2c8 0x6c8 0x000 0x3 0x0 #define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS 0x2c8 0x6c8 0x000 0x0 0x0 diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 3bc18835fb4b..4486bc47d140 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -69,21 +69,21 @@ label = "Home"; gpios = <&gpio5 10 0>; linux,code = <102>; /* KEY_HOME */ - gpio-key,wakeup; + wakeup-source; }; back { label = "Back"; gpios = <&gpio5 11 0>; linux,code = <158>; /* KEY_BACK */ - gpio-key,wakeup; + wakeup-source; }; program { label = "Program"; gpios = <&gpio5 12 0>; linux,code = <362>; /* KEY_PROGRAM */ - gpio-key,wakeup; + wakeup-source; }; volume-up { diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 53fd75c8ffcf..c05e7cfd0cbc 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -59,22 +59,22 @@ power { label = "Power Button"; - gpios = <&gpio1 8 0>; - linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; }; volume-up { label = "Volume Up"; - gpios = <&gpio2 14 0>; - linux,code = <115>; /* KEY_VOLUMEUP */ - gpio-key,wakeup; + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; }; volume-down { label = "Volume Down"; - gpios = <&gpio2 15 0>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ - gpio-key,wakeup; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 13e842b0c785..0ecb43d88522 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -231,7 +231,7 @@ interrupts = <26 0>; gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <660>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts index 64804719f0f4..3cf682a681f4 100644 --- a/arch/arm/boot/dts/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts @@ -101,7 +101,7 @@ interrupt-parent = <&gpio3>; interrupts = <23 0>; wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; }; @@ -126,7 +126,7 @@ interrupt-parent = <&gpio3>; interrupts = <22 0>; wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; }; @@ -183,13 +183,14 @@ status = "okay"; lvds0: lvds-channel@0 { - fsl,data-mapping = "jeida"; - fsl,data-width = <24>; + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; status = "okay"; display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { + native-mode = <&lvds0_timing0>; + + lvds0_timing0: hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -202,19 +203,36 @@ hsync-active = <0>; vsync-active = <0>; de-active = <1>; - pixelclk-active = <0>; + pixelclk-active = <1>; + }; + + lvds0_timing1: nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hsync-len = <60>; + hfront-porch = <50>; + vback-porch = <5>; + vsync-len = <13>; + vfront-porch = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; }; }; }; lvds1: lvds-channel@1 { - fsl,data-mapping = "jeida"; - fsl,data-width = <24>; + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; status = "okay"; display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { + native-mode = <&lvds1_timing0>; + + lvds1_timing0: hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -227,7 +245,7 @@ hsync-active = <0>; vsync-active = <0>; de-active = <1>; - pixelclk-active = <0>; + pixelclk-active = <1>; }; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index d3e50b22064f..bd3dfefa5778 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -37,7 +37,7 @@ compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <26000000>; }; }; @@ -50,7 +50,7 @@ label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index c275eecc9472..d35a5cdc3229 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -77,7 +77,7 @@ interrupt-parent = <&gpio3>; interrupts = <22 0>; wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts index f607d4f1d244..8c314eee4fdd 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts @@ -13,7 +13,7 @@ #include "imx6qdl-wandboard-revb1.dtsi" / { - model = "Wandboard i.MX6 Dual Lite Board"; + model = "Wandboard i.MX6 Dual Lite Board rev B1"; compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory { diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts new file mode 100644 index 000000000000..2cba82d0d859 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -0,0 +1,272 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6q.dtsi" +#include "imx6qdl-apalis.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board"; + compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", + "fsl,imx6q"; + + aliases { + i2c0 = &i2cddc; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + label = "Wake-Up"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + led4-green { + label = "LED_4_GREEN"; + gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + }; + + led4-red { + label = "LED_4_RED"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + led5-green { + label = "LED_5_GREEN"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + led5-red { + label = "LED_5_RED"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + ledpwm1 { + label = "PWM1"; + pwms = <&pwm1 0 50000>; + max-brightness = <255>; + }; + + ledpwm2 { + label = "PWM2"; + pwms = <&pwm2 0 50000>; + max-brightness = <255>; + }; + + ledpwm3 { + label = "PWM3"; + pwms = <&pwm3 0 50000>; + max-brightness = <255>; + }; + }; +}; + +&backlight { + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2cddc>; + status = "okay"; +}; + +&i2cddc { + status = "okay"; +}; + +/* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ +&i2c1 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&ldb { + status = "okay"; +}; + +&pcie { + /* active-low meaning opposite of regular PERST# active-low polarity */ + reset-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_otg_vbus { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sound_spdif { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +/* SD1 */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd_cd>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + /* + * Mux the Apalis GPIOs + * GPIO5, 6 used by optional fusion_F0710A kernel module + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 + &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 + &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 + &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 + >; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts new file mode 100644 index 000000000000..3101be5bafa7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -0,0 +1,88 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q-bx50v3.dtsi" + +/ { + model = "General Electric B450v3"; + compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q"; + + chosen { + stdout-path = &uart3; + }; + + panel-lvds0 { + compatible = "innolux,g121x1-l03"; + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ldb { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts new file mode 100644 index 000000000000..823f55ccb60f --- /dev/null +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -0,0 +1,88 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q-bx50v3.dtsi" + +/ { + model = "General Electric B650v3"; + compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q"; + + chosen { + stdout-path = &uart3; + }; + + panel-lvds0 { + compatible = "innolux,g121x1-l03"; + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ldb { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts new file mode 100644 index 000000000000..984d00000403 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -0,0 +1,157 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q-bx50v3.dtsi" + +/ { + model = "General Electric B850v3"; + compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q"; + + chosen { + stdout-path = &uart3; + }; + + panel-lvds0 { + compatible = "auo,b133htn01"; + backlight = <&backlight_lvds>; + ddc-i2c-bus = <&mux2_i2c2>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ldb { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + fsl,dual-channel; + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&i2c2 { + pca9547_ddc: mux@70 { + compatible = "nxp,pca9547"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + mux2_i2c1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + + mux2_i2c2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + + mux2_i2c3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + mux2_i2c4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + + mux2_i2c5: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + + mux2_i2c6: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + + mux2_i2c7: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + + mux2_i2c8: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&mux2_i2c1>; +}; + +&mux1_i2c1 { + ads7830@4a { + compatible = "ti,ads7830"; + reg = <0x4a>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi new file mode 100644 index 000000000000..8f6e6035f3f7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -0,0 +1,632 @@ +/* + * Support for imx6 based Advantech DMS-BA16 Qseven module + * + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_display>; + pwms = <&pwm1 0 5000000>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 101 102 103 104 105 106 107 108 109 + 110 111 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 128 129 + 130 131 132 133 134 135 136 137 138 139 + 140 141 142 143 144 145 146 147 148 149 + 150 151 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 168 169 + 170 171 172 173 174 175 176 177 178 179 + 180 181 182 183 184 185 186 187 188 189 + 190 191 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 208 209 + 210 211 212 213 214 215 216 217 218 219 + 220 221 222 223 224 225 226 227 228 229 + 230 231 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 248 249 + 250 251 252 253 254 255>; + default-brightness-level = <255>; + enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds_ppen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator-usbh1vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: n25q032@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "env"; + reg = <0xc0000 0x10000>; + }; + + partition@d0000 { + label = "spare"; + reg = <0xd0000 0x130000>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio7>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + onkey { + compatible = "dlg,da9063-onkey"; + }; + + regulators { + vdd_bcore1: bcore1 { + regulator-min-microvolt = <1420000>; + regulator-max-microvolt = <1420000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bcore2: bcore2 { + regulator-min-microvolt = <1420000>; + regulator-max-microvolt = <1420000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bpro: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bmem: bmem { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bio: bio { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bperi: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_ldo1: ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1860000>; + }; + + vdd_ldo2: ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1860000>; + }; + + vdd_ldo3: ldo3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3440000>; + }; + + vdd_ldo4: ldo4 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3440000>; + }; + + vdd_ldo5: ldo5 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo6: ldo6 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo7: ldo7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo8: ldo8 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo9: ldo9 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo10: ldo10 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo11: ldo11 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + rtc@32 { + compatible = "epson,rx8010"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x32>; + interrupt-parent = <&gpio4>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + vbus-supply = <®_usb_h1_vbus>; + reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>; + bus-width = <8>; + vmmc-supply = <&vdd_bperi>; + vqmmc-supply = <&vdd_bio>; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_display: dispgrp { + fsl,pins = < + /* BLEN_OUT */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + /* LVDS_PPEN_OUT */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* SPI1 CS */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_ecspi5: ecspi5grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* FEC Reset */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + /* AR8033 Interrupt */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* GPIO 0-7 */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0 + /* SUS_S3_OUT to CPLD */ + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe Reset */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* PCIe Wake */ + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + /* PMIC Interrupt */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + /* RTC_INT */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = < + /* HUB_RESET */ + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + /* uSDHC2 CD */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3_reset: usdhc3grp-reset { + fsl,pins = < + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + /* uSDHC4 CD */ + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + /* uSDHC4 SDIO PWR */ + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + /* uSDHC4 SDIO WP */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* uSDHC4 SDIO LED */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi new file mode 100644 index 000000000000..bb66dfd5294c --- /dev/null +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -0,0 +1,225 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6q-ba16.dtsi" + +/ { + clocks { + mclk: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <22000000>; + }; + }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1807"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + regulator-name = "3P3V_wlan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "fsl,imx6q-ba16-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-ba16-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&ecspi5 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5>; + status = "okay"; + + m25_eeprom: m25p80@0 { + compatible = "atmel,at25"; + spi-max-frequency = <20000000>; + size = <0x8000>; + pagesize = <64>; + reg = <0>; + address-width = <16>; + }; +}; + +&i2c1 { + pca9547: mux@70 { + compatible = "nxp,pca9547"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + mux1_i2c1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ads7830: ads7830@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + + mma8453: mma8453@1c { + compatible = "fsl,mma8453"; + reg = <0x1c>; + }; + }; + + mux1_i2c2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + + mpl3115: mpl3115@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + }; + + mux1_i2c3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + mux1_i2c4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&mclk>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_3p3v>; + }; + }; + + mux1_i2c5: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + pca9539: pca9539@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + mux1_i2c6: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + + mux1_i2c7: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + + mux1_i2c8: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + vmmc-supply = <®_wl18xx_vmmc>; + no-1-8-v; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts new file mode 100644 index 000000000000..4fa56019225e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -0,0 +1,502 @@ +/* + * Copyright 2016 United Western Technologies. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Uniwest Evi"; + compatible = "uniwest,imx6q-evi", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + reg_usbh1_vbus: regulator-usbhubreset { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_hubreset>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgvbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + panel { + compatible = "sharp,lq101k1ly04"; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>; + status = "okay"; +}; + +&ecspi3 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>, + <&gpio4 25 GPIO_ACTIVE_LOW>, + <&gpio4 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>; + status = "okay"; +}; + +&ecspi5 { + fsl,spi-num-chipselects = <4>; + cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>, + <&gpio1 13 GPIO_ACTIVE_LOW>, + <&gpio1 12 GPIO_ACTIVE_LOW>, + <&gpio2 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>; + status = "okay"; + + eeprom: m95m02@1 { + compatible = "st,m95m02", "atmel,at25"; + size = <262144>; + pagesize = <256>; + address-width = <24>; + spi-max-frequency = <5000000>; + reg = <1>; + }; + + pb_rtc: rtc@3 { + compatible = "nxp,rtc-pcf2123"; + spi-max-frequency = <2450000>; + spi-cs-high; + reg = <3>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpminand>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + clock-frequency = <100000>; + scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + status = "okay"; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0x0b>; + sbs,poll-retry-count = <100>; + sbs,i2c-retry-count = <100>; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + status = "okay"; +}; + +&weim { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; + fsl,weim-cs-gpr = <&gpr>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* pwr mcu alert irq */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* remainder ???? */ + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi1cs: ecspi1csgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068 + >; + }; + + pinctrl_ecspi3cs: ecspi3csgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0 + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 + >; + }; + + pinctrl_ecspi5: ecspi5grp { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1 + MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1 + MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1 + >; + }; + + pinctrl_ecspi5cs: ecspi5csgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + >; + }; + + pinctrl_gpminand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1 + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1 + >; + }; + + pinctrl_weimcs: weimcsgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 + >; + }; + + pinctrl_weimfpga: weimfpgagrp { + fsl,pins = < + /* weim misc */ + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1 + MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1 + MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1 + MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1 + MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1 + MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1 + /* weim data */ + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + /* weim address */ + MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1 + MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1 + MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0 + /* usbh1_b OC */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_usbh1_hubreset: usbh1hubresetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; + }; + + pinctrl_usbotgvbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 00bd63e63d0c..b715deb4ea46 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -44,7 +44,7 @@ label = "recovery"; gpios = <&gpio3 16 1>; linux,code = <0x198>; /* KEY_RESTART */ - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts new file mode 100644 index 000000000000..005318865f66 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 Amarula Solutions B.V. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore-rqs.dtsi" + +/ { + model = "Engicam i.CoreM6 Quad SOM"; + compatible = "engicam,imx6-icore-rqs", "fsl,imx6q"; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx-audio-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&i2c3 { + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 5645d52850a7..0da81bc2c68a 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -91,34 +91,25 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - reg_5p0v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; sound-sgtl5000 { @@ -205,6 +196,10 @@ }; &sata { + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <16>; + fsl,receive-eq-mdB = <3000>; status = "okay"; }; @@ -253,6 +248,9 @@ bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + voltage-ranges = <3300 3300>; + no-1-8-v; status = "okay"; }; @@ -263,6 +261,9 @@ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + voltage-ranges = <3300 3300>; + no-1-8-v; status = "okay"; }; @@ -270,163 +271,160 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + voltage-ranges = <3300 3300>; non-removable; no-1-8-v; status = "okay"; }; &iomuxc { - imx6q-tbs2910 { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059 + >; + }; - pinctrl_hdmi: hdmigrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; + pinctrl_gpio_fan: gpiofangrp { + fsl,pins = < + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_ir: irgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_sgtl5000: sgtl5000grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_ir: irgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059 + >; }; - gpio_fan { - pinctrl_gpio_fan: gpiofangrp { - fsl,pins = < - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059 + >; }; - gpio_leds { - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1 - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 88aa1e4c792d..2792da93db1f 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -77,7 +77,7 @@ interrupt-parent = <&gpio3>; interrupts = <22 0>; wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts index 20bf3c282623..9207d80f9cfb 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts @@ -13,7 +13,7 @@ #include "imx6qdl-wandboard-revb1.dtsi" / { - model = "Wandboard i.MX6 Quad Board"; + model = "Wandboard i.MX6 Quad Board rev B1"; compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 0d93c0e8f9ba..cd10c8de1904 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -22,7 +22,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; @@ -162,6 +162,7 @@ }; ipu2_di0_mipi: endpoint@2 { + remote-endpoint = <&mipi_mux_2>; }; ipu2_di0_lvds0: endpoint@3 { @@ -183,6 +184,7 @@ }; ipu2_di1_mipi: endpoint@2 { + remote-endpoint = <&mipi_mux_3>; }; ipu2_di1_lvds0: endpoint@3 { diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi new file mode 100644 index 000000000000..b33e5a95a0f0 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -0,0 +1,984 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Toradex Apalis iMX6Q/D Module"; + compatible = "toradex,apalis_imx6q", "fsl,imx6q"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + status = "disabled"; + }; + + /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */ + i2cddc: i2c@0 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_ddc>; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */ + &gpio2 30 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + status = "disabled"; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + /* on module USB hub */ + reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; + regulator-name = "usb_host_vbus_hub"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; + startup-delay-us = <2000>; + enable-active-high; + status = "okay"; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; + regulator-name = "usb_host_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_usb_host_vbus_hub>; + status = "disabled"; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6q-apalis-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; + + sound_spdif: sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + spdif-out; + status = "disabled"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +/* Apalis SPI1 */ +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "disabled"; +}; + +/* Apalis SPI2 */ +&ecspi2 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-handle = <ðphy>; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@7 { + interrupt-parent = <&gpio1>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + reg = <7>; + }; + }; +}; + +/* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier + * board) + */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; +}; + +/* + * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused) + */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_recovery>; + scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "disabled"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "disabled"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; + fsl,dte-mode; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + fsl,dte-mode; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_dte>; + fsl,dte-mode; + status = "disabled"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_dte>; + fsl,dte-mode; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "disabled"; +}; + +/* MMC1 */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vqmmc-supply = <®_3p3v>; + bus-width = <8>; + voltage-ranges = <3300 3300>; + status = "disabled"; +}; + +/* SD1 */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vqmmc-supply = <®_3p3v>; + bus-width = <4>; + voltage-ranges = <3300 3300>; + status = "disabled"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_3p3v>; + bus-width = <8>; + voltage-ranges = <3300 3300>; + non-removable; + status = "okay"; +}; + +&weim { + status = "disabled"; +}; + +&iomuxc { + /* pins used on module */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; + + pinctrl_apalis_gpio1: gpio2io04grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 + >; + }; + + pinctrl_apalis_gpio2: gpio2io05grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 + >; + }; + + pinctrl_apalis_gpio3: gpio2io06grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 + >; + }; + + pinctrl_apalis_gpio4: gpio2io07grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 + >; + }; + + pinctrl_apalis_gpio5: gpio6io10grp { + fsl,pins = < + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 + >; + }; + + pinctrl_apalis_gpio6: gpio6io09grp { + fsl,pins = < + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 + >; + }; + + pinctrl_apalis_gpio7: gpio1io02grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 + >; + }; + + pinctrl_apalis_gpio8: gpio1io06grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_cam_mclk: cammclkgrp { + fsl,pins = < + /* CAM sys_mclk */ + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1 + /* SPI1 cs */ + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + /* SPI2 cs */ + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Ethernet PHY reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + /* Ethernet PHY interrupt */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpio1io04grp { + fsl,pins = < + /* Power button */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c_ddc: gpioi2cddcgrp { + fsl,pins = < + /* DDC bitbang */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */ + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1 + >; + }; + + pinctrl_ipu1_lcdif: ipu1lcdifgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61 + /* DE */ + MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61 + /* HSync */ + MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61 + /* VSync */ + MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61 + MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61 + MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61 + MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61 + MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61 + MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61 + MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61 + MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61 + MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61 + MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61 + MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61 + MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61 + MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61 + MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61 + MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61 + MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61 + MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61 + MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61 + MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61 + MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61 + MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61 + MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61 + MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61 + MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61 + MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61 + >; + }; + + pinctrl_ipu2_vdac: ipu2vdacgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1 + MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1 + MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1 + MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1 + MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9 + MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9 + MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9 + MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9 + MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9 + MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9 + MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9 + MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9 + MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9 + MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9 + MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9 + MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9 + MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9 + MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9 + MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9 + MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9 + >; + }; + + pinctrl_mmc_cd: gpiommccdgrp { + fsl,pins = < + /* MMC1 CD */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { + fsl,pins = < + /* USBH_EN */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 + >; + }; + + pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp { + fsl,pins = < + /* USBH_HUB_EN */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 + >; + }; + + pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp { + fsl,pins = < + /* USBO1 power en */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 + >; + }; + + pinctrl_reset_moci: gpioresetmocigrp { + fsl,pins = < + /* RESET_MOCI control */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 + >; + }; + + pinctrl_sd_cd: gpiosdcdgrp { + fsl,pins = < + /* SD1 CD */ + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_touch_int: gpiotouchintgrp { + fsl,pins = < + /* STMPE811 interrupt */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_uart1_dce: uart1dcegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart1_dte: uart1dtegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 + >; + }; + + /* Additional DTR, DSR, DCD */ + pinctrl_uart1_ctrl: uart1ctrlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + + pinctrl_uart2_dce: uart2dcegrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart2_dte: uart2dtegrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4_dce: uart4dcegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart4_dte: uart4dtegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5_dce: uart5dcegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart5_dte: uart5dtegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 + MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 + MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071 + MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index e26ebeb5b45c..a8f3500ee522 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -94,7 +94,7 @@ label = "User button"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 5cd16f2178b8..9d7ab6cdc9a6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -320,13 +320,13 @@ pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; pinctrl_pwm4: pwm4grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 9fa8a10c7cc8..8dd74e98ffd6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -473,7 +473,7 @@ pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index e8375e173873..ec3fe7444e15 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -462,7 +462,7 @@ pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 66983dc5cbda..367cc49eea0d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -397,8 +397,9 @@ }; &pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; + pinctrl-names = "default", "state_dio"; + pinctrl-0 = <&pinctrl_pwm4_backlight>; + pinctrl-1 = <&pinctrl_pwm4_dio>; status = "okay"; }; @@ -573,12 +574,20 @@ >; }; - pinctrl_pwm4: pwm4grp { + pinctrl_pwm4_backlight: pwm4grpbacklight { fsl,pins = < + /* LVDS_PWM J6.5 */ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; + pinctrl_pwm4_dio: pwm4grpdio { + fsl,pins = < + /* DIO3 J16.4 */ + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index cca39f194017..f27f184558fb 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -262,7 +262,7 @@ pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 6dd0b764e036..d6c2358ffad4 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -48,7 +48,7 @@ ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio3 5 1>; + gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; }; @@ -67,7 +67,7 @@ reg_usbh1_vbus: usb-h1-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 0 0>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; regulator-name = "usb_h1_vbus"; @@ -78,7 +78,7 @@ reg_usbotg_vbus: usb-otg-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; regulator-name = "usb_otg_vbus"; @@ -253,7 +253,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>; - reset-gpio = <&gpio3 4 0>; + reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi new file mode 100644 index 000000000000..f8d945a56525 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -0,0 +1,411 @@ +/* + * Copyright (C) 2015 Amarula Solutions B.V. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx6qdl-clock.h> + +/ { + memory { + reg = <0x10000000 0x80000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sd3_vmmc: regulator-sd3-vmmc { + compatible = "regulator-fixed"; + regulator-name = "P3V3_SD3_SWITCHED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + reg_sd4_vmmc: regulator-sd4-vmmc { + compatible = "regulator-fixed"; + regulator-name = "P3V3_SD4_SWITCHED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>; + clock-names = "refclk"; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-handle = <ð_phy>; + phy-mode = "rgmii"; + status = "okay"; + + mdio { + eth_phy: ethernet-phy { + rxc-skew-ps = <1140>; + txc-skew-ps = <1140>; + txen-skew-ps = <600>; + rxdv-skew-ps = <240>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <600>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <240>; + txd0-skew-ps = <60>; + txd1-skew-ps = <60>; + txd2-skew-ps = <60>; + txd3-skew-ps = <240>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + disable-over-current; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + no-1-8-v; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmcc-supply = <®_sd3_vmmc>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + bus-witdh=<4>; + no-1-8-v; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc4>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + vmcc-supply = <®_sd4_vmmc>; + bus-witdh=<8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmux { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059 /* PCIe Reset */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1f059 /* HUB USB Reset */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1f059 /* CD */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f059 /* PWR */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B1 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B1 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17070 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10070 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4grp_100mhz { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170B1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100B1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4grp_200mhz { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170F9 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100F9 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 6d4069cc9419..86460e46d055 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -154,6 +154,7 @@ bus-width = <4>; mmc-pwrseq = <&usdhc1_pwrseq>; keep-power-in-suspend; + no-1-8-v; non-removable; vmmc-supply = <®_brcm>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index a35d54fd9cd3..dc74aa395ff5 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -138,7 +138,7 @@ label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; menu { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index caeed56b74a3..c6c590d1e940 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -119,7 +119,7 @@ label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; menu { diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 1a69a3420ac8..0f1aca450fe6 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -105,7 +105,7 @@ label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; menu { diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a6d445c17779..0b5c4de74485 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -79,21 +79,21 @@ power { label = "Power Button"; gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <KEY_POWER>; }; volume-up { label = "Volume Up"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <KEY_VOLUMEUP>; }; volume-down { label = "Volume Down"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <KEY_VOLUMEDOWN>; }; }; @@ -238,6 +238,7 @@ regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; + regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 13cb7ccfea44..efd06b576f1d 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -41,7 +41,7 @@ compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <26000000>; }; }; @@ -52,7 +52,7 @@ label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -227,6 +227,11 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; phy-supply = <®_3v3_etn>; @@ -276,7 +281,7 @@ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; touchscreen: tsc2007@48 { @@ -288,7 +293,7 @@ interrupts = <26 0>; gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <660>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 1211da894ee9..d3e54e40a017 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -34,6 +34,18 @@ gpio = <&gpio7 12 0>; }; }; + + sound { + compatible = "fsl,imx6q-udoo-ac97", + "fsl,imx-audio-ac97"; + model = "fsl,imx6q-udoo-ac97"; + audio-cpu = <&ssi1>; + audio-routing = + "RX", "Mic Jack", + "Headphone Jack", "TX"; + mux-int-port = <1>; + mux-ext-port = <6>; + }; }; &fec { @@ -109,6 +121,36 @@ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; + + pinctrl_ac97_running: ac97running { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_ac97_warm_reset: ac97warmreset { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_ac97_reset: ac97reset { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; }; }; @@ -132,3 +174,18 @@ non-removable; status = "okay"; }; + +&audmux { + status = "okay"; +}; + +&ssi1 { + cell-index = <0>; + fsl,mode = "ac97-slave"; + pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset"; + pinctrl-0 = <&pinctrl_ac97_running>; + pinctrl-1 = <&pinctrl_ac97_reset>; + pinctrl-2 = <&pinctrl_ac97_warm_reset>; + ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4f6ae921656f..b42822aa14f2 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -261,7 +261,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI1>, <&clks IMX6QDL_CLK_ECSPI1>; clock-names = "ipg", "per"; - dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dmas = <&sdma 3 8 1>, <&sdma 4 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -275,7 +275,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI2>, <&clks IMX6QDL_CLK_ECSPI2>; clock-names = "ipg", "per"; - dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dmas = <&sdma 5 8 1>, <&sdma 6 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -289,7 +289,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI3>, <&clks IMX6QDL_CLK_ECSPI3>; clock-names = "ipg", "per"; - dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dmas = <&sdma 7 8 1>, <&sdma 8 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -303,7 +303,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI4>, <&clks IMX6QDL_CLK_ECSPI4>; clock-names = "ipg", "per"; - dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dmas = <&sdma 9 8 1>, <&sdma 10 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -896,7 +896,6 @@ #size-cells = <1>; reg = <0x2100000 0x10000>; ranges = <0 0x2100000 0x10000>; - interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, <&clks IMX6QDL_CLK_CAAM_ACLK>, <&clks IMX6QDL_CLK_CAAM_IPG>, diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts new file mode 100644 index 000000000000..5ce3840d83d3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts @@ -0,0 +1,93 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6qdl-sabreauto.dtsi" + +/ { + model = "Freescale i.MX6 Quad Plus SABRE Automotive Board"; + compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp"; +}; + +&i2c2 { + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&iomuxc { + imx6qdl-sabreauto { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b018 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b018 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b018 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b018 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b018 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b018 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b018 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + }; +}; + +&pcie { + status = "disabled"; +}; + +&vgen3_reg { + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts new file mode 100644 index 000000000000..b23458062f5e --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts @@ -0,0 +1,93 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6qdl-sabresd.dtsi" + +/ { + model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board"; + compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; +}; + +&cpu0 { + arm-supply = <&sw2_reg>; +}; + +&iomuxc { + imx6qdl-sabresd { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + }; +}; + +&pcie { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi new file mode 100644 index 000000000000..1ada71437e49 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -0,0 +1,86 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6q.dtsi" + +/ { + soc { + ocram2: sram@00940000 { + compatible = "mmio-sram"; + reg = <0x00940000 0x20000>; + clocks = <&clks IMX6QDL_CLK_OCRAM>; + }; + + ocram3: sram@00960000 { + compatible = "mmio-sram"; + reg = <0x00960000 0x20000>; + clocks = <&clks IMX6QDL_CLK_OCRAM>; + }; + + ipu1: ipu@02400000 { + compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; + clocks = <&clks IMX6QDL_CLK_IPU1>, + <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>, + <&clks IMX6QDL_CLK_PRG0_APB>; + clock-names = "bus", + "di0", "di1", + "di0_sel", "di1_sel", + "ldb_di0", "ldb_di1", "prg"; + }; + + ipu2: ipu@02800000 { + compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; + clocks = <&clks IMX6QDL_CLK_IPU2>, + <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>, + <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>, + <&clks IMX6QDL_CLK_PRG1_APB>; + clock-names = "bus", + "di0", "di1", + "di0_sel", "di1_sel", + "ldb_di0", "ldb_di1", "prg"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 10c69963100f..058bcdceb81a 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -118,7 +118,7 @@ bus-width = <4>; non-removable; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; mmc-pwrseq = <&usdhc3_pwrseq>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 115f3fd78971..96ea936eeeb0 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -52,7 +52,7 @@ cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; vmmc-supply = <&vcc_sd3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 94ac4005d9cd..f1d37306e8bf 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -184,6 +184,13 @@ status = "okay"; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -283,7 +290,7 @@ non-removable; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; status = "okay"; }; @@ -296,7 +303,7 @@ cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; vmmc-supply = <&vcc_sd3>; status = "okay"; }; @@ -378,6 +385,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 + MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 6aaa5ec3d846..720728001d3c 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -8,7 +8,6 @@ /dts-v1/; -#include <dt-bindings/input/input.h> #include "imx6ul.dtsi" / { @@ -131,7 +130,7 @@ pinctrl-2 = <&pinctrl_usdhc1_200mhz>; cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; vmmc-supply = <®_sd1_vmmc>; status = "okay"; }; @@ -141,7 +140,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h index 20c7da1affce..0034eeb84542 100644 --- a/arch/arm/boot/dts/imx6ul-pinfunc.h +++ b/arch/arm/boot/dts/imx6ul-pinfunc.h @@ -14,925 +14,925 @@ * The pin function ID is a tuple of * <mux_reg conf_reg input_reg mux_mode input_val> */ -#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x0014 0x02a0 0x0000 5 0 -#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x0018 0x02a4 0x0000 5 0 +#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x0014 0x02a0 0x0000 5 0 +#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x0018 0x02a4 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x001c 0x02a8 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0020 0x02ac 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0024 0x02b0 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0028 0x02b4 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x002c 0x02b8 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0030 0x02bc 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0034 0x02c0 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0038 0x02c4 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x003c 0x02c8 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0040 0x02cc 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x001c 0x02a8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0020 0x02ac 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0024 0x02b0 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0028 0x02b4 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x002c 0x02b8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0030 0x02bc 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0034 0x02c0 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0038 0x02c4 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x003c 0x02c8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0040 0x02cc 0x0000 5 0 -#define MX6UL_PAD_JTAG_MOD__SJC_MOD 0x0044 0x02d0 0x0000 0 0 -#define MX6UL_PAD_JTAG_MOD__GPT2_CLK 0x0044 0x02d0 0x05a0 1 0 -#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT 0x0044 0x02d0 0x0000 2 0 -#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0 -#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0 -#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0 -#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0 -#define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0 -#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0 -#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0 -#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0 -#define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0 -#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0 -#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0 -#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0 -#define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0 -#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0 -#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x004c 0x02d8 0x05fc 2 0 -#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2 0x004c 0x02d8 0x0000 3 0 -#define MX6UL_PAD_JTAG_TDO__CCM_STOP 0x004c 0x02d8 0x0000 4 0 -#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x004c 0x02d8 0x0000 5 0 -#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT 0x004c 0x02d8 0x0000 6 0 -#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT 0x004c 0x02d8 0x0000 8 0 -#define MX6UL_PAD_JTAG_TDI__SJC_TDI 0x0050 0x02dc 0x0000 0 0 -#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1 0x0050 0x02dc 0x0000 1 0 -#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0050 0x02dc 0x05f8 2 0 -#define MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0050 0x02dc 0x0000 4 0 -#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0050 0x02dc 0x0000 5 0 -#define MX6UL_PAD_JTAG_TDI__MQS_LEFT 0x0050 0x02dc 0x0000 6 0 -#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL 0x0050 0x02dc 0x0000 8 0 -#define MX6UL_PAD_JTAG_TCK__SJC_TCK 0x0054 0x02e0 0x0000 0 0 -#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2 0x0054 0x02e0 0x0000 1 0 -#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x0000 2 0 -#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0 -#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0 -#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0 -#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0 -#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0 -#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0 -#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0 -#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0 -#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1 -#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0 -#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x005c 0x02e8 0x04b8 2 0 -#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1 0x005c 0x02e8 0x0574 3 0 -#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT 0x005c 0x02e8 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x005c 0x02e8 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN 0x005c 0x02e8 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET 0x005c 0x02e8 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B 0x005c 0x02e8 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x0060 0x02ec 0x05b0 0 1 -#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1 0x0060 0x02ec 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0060 0x02ec 0x0664 2 0 -#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2 0x0060 0x02ec 0x057c 3 0 -#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT 0x0060 0x02ec 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x0060 0x02ec 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT 0x0060 0x02ec 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET 0x0060 0x02ec 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x0060 0x02ec 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x0064 0x02f0 0x05a4 0 0 -#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2 0x0064 0x02f0 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR 0x0064 0x02f0 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0 -#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0 -#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0 -#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1 -#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0 -#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0 -#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1 -#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1 -#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x006c 0x02f8 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x006c 0x02f8 0x0644 8 2 -#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x0070 0x02fc 0x057c 0 1 -#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x0070 0x02fc 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID 0x0070 0x02fc 0x04bc 2 0 -#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD 0x0070 0x02fc 0x0530 3 0 -#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x0070 0x02fc 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x0070 0x02fc 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT 0x0070 0x02fc 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0070 0x02fc 0x0644 8 3 -#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x0070 0x02fc 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x0074 0x0300 0x0578 0 0 -#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x0074 0x0300 0x0580 1 0 -#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE 0x0074 0x0300 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK 0x0074 0x0300 0x0000 3 0 -#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP 0x0074 0x0300 0x069c 4 0 -#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0074 0x0300 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT 0x0074 0x0300 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B 0x0074 0x0300 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS 0x0074 0x0300 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS 0x0074 0x0300 0x0620 8 0 -#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0078 0x0304 0x0000 0 0 -#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0078 0x0304 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE 0x0078 0x0304 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK 0x0078 0x0304 0x0528 3 0 -#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B 0x0078 0x0304 0x0674 4 1 -#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0078 0x0304 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO07__CCM_STOP 0x0078 0x0304 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x0078 0x0304 0x0620 8 1 -#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS 0x0078 0x0304 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x007c 0x0308 0x0000 0 0 -#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x007c 0x0308 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT 0x007c 0x0308 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC 0x007c 0x0308 0x052c 3 1 -#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x007c 0x0308 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x007c 0x0308 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x007c 0x0308 0x04c0 6 1 -#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x007c 0x0308 0x0640 8 1 -#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS 0x007c 0x0308 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x0080 0x030c 0x0000 0 0 -#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x0080 0x030c 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN 0x0080 0x030c 0x0618 2 0 -#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC 0x0080 0x030c 0x0524 3 1 -#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B 0x0080 0x030c 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0080 0x030c 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B 0x0080 0x030c 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0080 0x030c 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS 0x0080 0x030c 0x0640 8 2 -#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0084 0x0310 0x0000 0 0 -#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x0084 0x0310 0x0624 0 2 -#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02 0x0084 0x0310 0x0000 1 0 -#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x0084 0x0310 0x05b4 2 0 -#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x0000 3 0 -#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1 0x0084 0x0310 0x0000 4 0 -#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16 0x0084 0x0310 0x0000 5 0 -#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT 0x0084 0x0310 0x0000 8 0 -#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0088 0x0314 0x0624 0 3 -#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0088 0x0314 0x0000 0 0 -#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03 0x0088 0x0314 0x0000 1 0 -#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x0088 0x0314 0x05b8 2 0 -#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x0000 3 0 -#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK 0x0088 0x0314 0x0594 4 0 -#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17 0x0088 0x0314 0x0000 5 0 -#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0000 8 0 -#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x008c 0x0318 0x0000 0 0 -#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x008c 0x0318 0x0620 0 2 -#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK 0x008c 0x0318 0x0000 1 0 -#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP 0x008c 0x0318 0x066c 2 1 -#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x0000 3 0 -#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN 0x008c 0x0318 0x0000 4 0 -#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x008c 0x0318 0x0000 5 0 -#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x0000 8 0 -#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0090 0x031c 0x0620 0 3 -#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x0090 0x031c 0x0000 0 0 -#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER 0x0090 0x031c 0x0000 1 0 -#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x0090 0x031c 0x0668 2 1 -#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x0000 3 0 -#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT 0x0090 0x031c 0x0000 4 0 -#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0090 0x031c 0x0000 5 0 -#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0000 8 0 -#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0094 0x0320 0x0000 0 0 -#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0094 0x0320 0x062c 0 0 -#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02 0x0094 0x0320 0x0000 1 0 -#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x0094 0x0320 0x05bc 2 0 -#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x0000 3 0 -#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1 -#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0 -#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0 -#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1 -#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0 -#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0 -#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x0098 0x0324 0x05c0 2 0 -#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x0000 3 0 -#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2 0x0098 0x0324 0x0590 4 0 -#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x0098 0x0324 0x0000 5 0 -#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE 0x0098 0x0324 0x0000 7 0 -#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0000 8 0 -#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x009c 0x0328 0x0000 0 0 -#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x009c 0x0328 0x0628 0 0 -#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS 0x009c 0x0328 0x0000 1 0 -#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x009c 0x0328 0x0000 2 0 -#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x0000 3 0 -#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2 0x009c 0x0328 0x0000 4 0 -#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x009c 0x0328 0x0000 5 0 -#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B 0x009c 0x0328 0x0000 7 0 -#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x0000 8 0 -#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x00a0 0x032c 0x0628 0 1 -#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x00a0 0x032c 0x0000 0 0 -#define MX6UL_PAD_UART2_RTS_B__ENET1_COL 0x00a0 0x032c 0x0000 1 0 -#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x00a0 0x032c 0x0588 2 0 -#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x0000 3 0 -#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3 0x00a0 0x032c 0x0000 4 0 -#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x00a0 0x032c 0x0000 5 0 -#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL 0x00a0 0x032c 0x0000 7 0 -#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0000 8 0 -#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x00a4 0x0330 0x0000 0 0 -#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0 -#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0 -#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0 -#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0 -#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0 -#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2 -#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0 -#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT 0x00a4 0x0330 0x0000 7 0 -#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x0000 8 0 -#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x00a8 0x0334 0x0634 0 1 -#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0 -#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0 -#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0 -#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0 -#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3 -#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0 -#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0 -#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT 0x00a8 0x0334 0x0000 8 0 -#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x00ac 0x0338 0x0000 0 0 -#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0 -#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0 -#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0 -#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0 -#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0 -#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0 -#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0 -#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x00b0 0x033c 0x0630 0 1 -#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0 -#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0 -#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0 -#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0 -#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0 -#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0 -#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0 -#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x00b4 0x0340 0x0000 0 0 -#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0 -#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0 -#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1 -#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0 -#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0 -#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0 -#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0000 8 0 -#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x00b8 0x0344 0x063c 0 1 -#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0 -#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0 -#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2 -#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0 -#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0 -#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0 -#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0 -#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0 -#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x0000 8 0 -#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0 -#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4 -#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0 -#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2 -#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0 -#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0 -#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5 -#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0 -#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0 -#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2 -#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0 -#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0 -#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0 -#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0000 8 0 -#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x00c4 0x0350 0x0000 0 0 -#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0 -#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0 -#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0 -#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0 -#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0 -#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0 -#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1 -#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0 -#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1 -#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0 -#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0 -#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0 -#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3 -#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0 -#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0 -#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0 -#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0 -#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0 -#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0 -#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4 -#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0 -#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1 -#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0 -#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0 -#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0 -#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0 -#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2 -#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0 -#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1 -#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0 -#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0 -#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0 -#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3 -#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0 -#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0 -#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0 -#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0 -#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0 -#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0 -#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0 -#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0 -#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0 -#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2 -#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0 -#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0000 8 0 -#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x00e0 0x036c 0x0000 0 0 -#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1 -#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0 -#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0 -#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0 -#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0000 8 0 -#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x00e4 0x0370 0x0000 0 0 -#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x00e4 0x0370 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX 0x00e4 0x0370 0x064c 1 1 -#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD 0x00e4 0x0370 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL 0x00e4 0x0370 0x05b4 3 1 -#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x00e4 0x0370 0x0578 4 1 -#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x00e4 0x0370 0x0000 5 0 -#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x00e4 0x0370 0x0000 6 0 -#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR 0x00e4 0x0370 0x0000 8 0 -#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0 -#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2 -#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1 -#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0 -#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0 -#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x00e8 0x0374 0x0000 6 0 -#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0000 8 0 -#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x00ec 0x0378 0x0000 0 0 -#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0x00ec 0x0378 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX 0x00ec 0x0378 0x0654 1 0 -#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B 0x00ec 0x0378 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL 0x00ec 0x0378 0x05bc 3 1 -#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26 0x00ec 0x0378 0x0000 4 0 -#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x00ec 0x0378 0x0000 5 0 -#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x00ec 0x0378 0x0000 6 0 -#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M 0x00ec 0x0378 0x0000 8 0 -#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x00f0 0x037c 0x0000 0 0 -#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0x00f0 0x037c 0x0654 1 1 -#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX 0x00f0 0x037c 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN 0x00f0 0x037c 0x0000 2 0 -#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA 0x00f0 0x037c 0x05c0 3 1 -#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0 -#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0 -#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0 -#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0 -#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0 -#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD 0x00f4 0x0380 0x0000 2 0 -#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x00f4 0x0380 0x0564 3 0 -#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03 0x00f4 0x0380 0x0000 4 0 -#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x00f4 0x0380 0x0000 5 0 -#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x00f4 0x0380 0x0000 6 0 -#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR 0x00f4 0x0380 0x0000 8 0 -#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0 -#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1 -#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0 -#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0 -#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0 -#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0 -#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x00f8 0x0384 0x0000 6 0 -#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0000 8 0 -#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00fc 0x0388 0x0000 0 0 -#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x00fc 0x0388 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS 0x00fc 0x0388 0x0658 1 0 -#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B 0x00fc 0x0388 0x0000 2 0 -#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x00fc 0x0388 0x0568 3 0 -#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00fc 0x0388 0x057c 4 2 -#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x00fc 0x0388 0x0000 5 0 -#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x00fc 0x0388 0x0000 6 0 -#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x0000 8 0 -#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x0100 0x038c 0x0000 0 0 -#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1 -#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0 -#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0 -#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0 -#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0 -#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY 0x0100 0x038c 0x0000 8 0 -#define MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x0104 0x0390 0x0000 0 0 -#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0 -#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0 -#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2 -#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0 -#define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0 -#define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0 -#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0 -#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x0108 0x0394 0x0000 0 0 -#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E 0x0108 0x0394 0x0000 1 0 -#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x0108 0x0394 0x063c 2 3 -#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0x0108 0x0394 0x0000 2 0 -#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC 0x0108 0x0394 0x060c 3 0 -#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B 0x0108 0x0394 0x0000 4 0 -#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x0108 0x0394 0x0000 5 0 -#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY 0x0108 0x0394 0x0000 8 0 -#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x010c 0x0398 0x05dc 0 0 -#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS 0x010c 0x0398 0x0000 1 0 -#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x010c 0x0398 0x0000 2 0 -#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS 0x010c 0x0398 0x0638 2 2 -#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK 0x010c 0x0398 0x0608 3 0 -#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB 0x010c 0x0398 0x0000 4 0 -#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x010c 0x0398 0x0000 5 0 -#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1 0x010c 0x0398 0x0000 8 0 -#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x0110 0x039c 0x0000 0 0 -#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1 -#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3 -#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0 -#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0 -#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0 -#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0 -#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0 -#define MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x0114 0x03a0 0x0000 0 0 -#define MX6UL_PAD_LCD_RESET__LCDIF_CS 0x0114 0x03a0 0x0000 1 0 -#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI 0x0114 0x03a0 0x0000 2 0 -#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA 0x0114 0x03a0 0x0000 3 0 -#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x0114 0x03a0 0x0000 4 0 -#define MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0114 0x03a0 0x0000 5 0 -#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2 -#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2 -#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01 0x011c 0x03a8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2 -#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02 0x0120 0x03ac 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2 -#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2 -#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04 0x0128 0x03b4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA 0x0128 0x03b4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3 -#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05 0x012c 0x03b8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1 0x012c 0x03b8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2 -#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06 0x0130 0x03bc 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2 0x0130 0x03bc 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3 -#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0 -#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07 0x0134 0x03c0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2 -#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1 -#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1 -#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2 -#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3 -#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA19__EIM_DATA11 0x0164 0x03f0 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x0164 0x03f0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27 0x0164 0x03f0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x0168 0x03f4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2 -#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0 -#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3 -#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0 -#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0 -#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0000 8 0 -#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0 -#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2 -#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0 -#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0 -#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0 -#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0 -#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0 -#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0 -#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2 -#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0 -#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0 -#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0 -#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0 -#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2 -#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2 -#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1 -#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2 -#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0190 0x041c 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x0190 0x041c 0x068c 1 1 -#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02 0x0190 0x041c 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x0190 0x041c 0x0564 3 1 -#define MX6UL_PAD_NAND_DATA04__EIM_AD12 0x0190 0x041c 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x0190 0x041c 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x0190 0x041c 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX 0x0190 0x041c 0x062c 8 2 -#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0194 0x0420 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x0194 0x0420 0x0690 1 1 -#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03 0x0194 0x0420 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x0194 0x0420 0x056c 3 1 -#define MX6UL_PAD_NAND_DATA05__EIM_AD13 0x0194 0x0420 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07 0x0194 0x0420 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x0194 0x0420 0x062c 8 3 -#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX 0x0194 0x0420 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0198 0x0424 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x0198 0x0424 0x0694 1 1 -#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK 0x0198 0x0424 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x0198 0x0424 0x0568 3 1 -#define MX6UL_PAD_NAND_DATA06__EIM_AD14 0x0198 0x0424 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x0198 0x0424 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x0198 0x0424 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS 0x0198 0x0424 0x0628 8 4 -#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1 -#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5 -#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS 0x019c 0x0428 0x0000 8 0 -#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x01a0 0x042c 0x0000 0 0 -#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x01a0 0x042c 0x0000 1 0 -#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS 0x01a0 0x042c 0x0000 2 0 -#define MX6UL_PAD_NAND_ALE__PWM3_OUT 0x01a0 0x042c 0x0000 3 0 -#define MX6UL_PAD_NAND_ALE__EIM_ADDR17 0x01a0 0x042c 0x0000 4 0 -#define MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x01a0 0x042c 0x0000 5 0 -#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1 0x01a0 0x042c 0x0000 8 0 -#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x01a4 0x0430 0x0000 0 0 -#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x01a4 0x0430 0x0000 1 0 -#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x01a4 0x0430 0x0000 2 0 -#define MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x01a4 0x0430 0x0000 3 0 -#define MX6UL_PAD_NAND_WP_B__EIM_BCLK 0x01a4 0x0430 0x0000 4 0 -#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x01a4 0x0430 0x0000 5 0 -#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY 0x01a4 0x0430 0x0000 8 0 -#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0 -#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0 -#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0 -#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0 -#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0 -#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0 -#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0 -#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX 0x01a8 0x0434 0x0634 8 2 -#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x01ac 0x0438 0x0000 0 0 -#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x01ac 0x0438 0x0000 1 0 -#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x01ac 0x0438 0x0000 2 0 -#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x01ac 0x0438 0x0554 3 1 -#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B 0x01ac 0x0438 0x0000 4 0 -#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x01ac 0x0438 0x0000 5 0 -#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x01ac 0x0438 0x0634 8 3 -#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX 0x01ac 0x0438 0x0000 8 0 -#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x01b0 0x043c 0x0000 0 0 -#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x01b0 0x043c 0x0000 1 0 -#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x01b0 0x043c 0x0000 2 0 -#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x01b0 0x043c 0x055c 3 1 -#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18 0x01b0 0x043c 0x0000 4 0 -#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x01b0 0x043c 0x0000 5 0 -#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x01b0 0x043c 0x0000 8 0 -#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS 0x01b0 0x043c 0x0630 8 2 -#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x01b4 0x0440 0x0000 0 0 -#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x01b4 0x0440 0x0000 1 0 -#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x01b4 0x0440 0x0000 2 0 -#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x01b4 0x0440 0x0558 3 1 -#define MX6UL_PAD_NAND_CLE__EIM_ADDR16 0x01b4 0x0440 0x0000 4 0 -#define MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x01b4 0x0440 0x0000 5 0 -#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x01b4 0x0440 0x0630 8 3 -#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS 0x01b4 0x0440 0x0000 8 0 -#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x01b8 0x0444 0x0000 0 0 -#define MX6UL_PAD_NAND_DQS__CSI_FIELD 0x01b8 0x0444 0x0530 1 1 -#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x01b8 0x0444 0x0000 2 0 -#define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0 -#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0 -#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0 -#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0 -#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x0000 8 0 -#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0 -#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0 -#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC 0x01bc 0x0448 0x0000 2 0 -#define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0 -#define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0 -#define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0 -#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0 -#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0 -#define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0 -#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0 -#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0 -#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3 -#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0 -#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0 -#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0000 8 0 -#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x01c4 0x0450 0x0000 0 0 -#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3 0x01c4 0x0450 0x0000 1 0 -#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC 0x01c4 0x0450 0x05fc 2 1 -#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX 0x01c4 0x0450 0x0000 3 0 -#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21 0x01c4 0x0450 0x0000 4 0 -#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x01c4 0x0450 0x0000 5 0 -#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x0000 8 0 -#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x01c8 0x0454 0x0000 0 0 -#define MX6UL_PAD_SD1_DATA1__GPT2_CLK 0x01c8 0x0454 0x05a0 1 1 -#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK 0x01c8 0x0454 0x05f8 2 1 -#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX 0x01c8 0x0454 0x0584 3 3 -#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22 0x01c8 0x0454 0x0000 4 0 -#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x01c8 0x0454 0x0000 5 0 -#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR 0x01c8 0x0454 0x0000 8 0 -#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x01cc 0x0458 0x0000 0 0 -#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1 0x01cc 0x0458 0x0598 1 1 -#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA 0x01cc 0x0458 0x05f4 2 1 -#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX 0x01cc 0x0458 0x0000 3 0 -#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23 0x01cc 0x0458 0x0000 4 0 -#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x01cc 0x0458 0x0000 5 0 -#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1 0x01cc 0x0458 0x0000 6 0 -#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0000 8 0 -#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x01d0 0x045c 0x0000 0 0 -#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2 0x01d0 0x045c 0x059c 1 1 -#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA 0x01d0 0x045c 0x0000 2 0 -#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX 0x01d0 0x045c 0x0588 3 3 -#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24 0x01d0 0x045c 0x0000 4 0 -#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x01d0 0x045c 0x0000 5 0 -#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2 0x01d0 0x045c 0x0000 6 0 -#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x0000 8 0 -#define MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x01d4 0x0460 0x0000 0 0 -#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B 0x01d4 0x0460 0x0674 1 0 -#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B 0x01d4 0x0460 0x0000 2 0 -#define MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x01d4 0x0460 0x05a8 3 0 -#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B 0x01d4 0x0460 0x0000 4 0 -#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x01d4 0x0460 0x0000 5 0 -#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL 0x01d4 0x0460 0x0000 6 0 -#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x01d4 0x0460 0x0000 8 0 -#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x01d4 0x0460 0x064c 8 0 -#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x01d8 0x0464 0x0528 0 1 -#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP 0x01d8 0x0464 0x069c 1 2 -#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B 0x01d8 0x0464 0x0000 2 0 -#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x01d8 0x0464 0x05a4 3 2 -#define MX6UL_PAD_CSI_PIXCLK__EIM_OE 0x01d8 0x0464 0x0000 4 0 -#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x01d8 0x0464 0x0000 5 0 -#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 0x01d8 0x0464 0x0000 6 0 -#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x01d8 0x0464 0x064c 8 3 -#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x01d8 0x0464 0x0000 8 0 -#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x01dc 0x0468 0x052c 0 0 -#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x01dc 0x0468 0x0670 1 0 -#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK 0x01dc 0x0468 0x0000 2 0 -#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x01dc 0x0468 0x05b0 3 0 -#define MX6UL_PAD_CSI_VSYNC__EIM_RW 0x01dc 0x0468 0x0000 4 0 -#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x01dc 0x0468 0x0000 5 0 -#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x01dc 0x0468 0x0000 6 0 -#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x01dc 0x0468 0x0648 8 0 -#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x01dc 0x0468 0x0000 8 0 -#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x01e0 0x046c 0x0524 0 0 -#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x01e0 0x046c 0x0678 1 0 -#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD 0x01e0 0x046c 0x0000 2 0 -#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x01e0 0x046c 0x05ac 3 0 -#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B 0x01e0 0x046c 0x0000 4 0 -#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x01e0 0x046c 0x0000 5 0 -#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x01e0 0x046c 0x0000 6 0 -#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x01e0 0x046c 0x0000 8 0 -#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x01e0 0x046c 0x0648 8 1 -#define MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x01e4 0x0470 0x04c4 0 0 -#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x01e4 0x0470 0x067c 1 0 -#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B 0x01e4 0x0470 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x01e4 0x0470 0x0544 3 0 -#define MX6UL_PAD_CSI_DATA00__EIM_AD00 0x01e4 0x0470 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x01e4 0x0470 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT 0x01e4 0x0470 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x01e4 0x0470 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX 0x01e4 0x0470 0x0644 8 0 -#define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0 -#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0 -#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0 -#define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1 -#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1 -#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x01ec 0x0478 0x0684 1 2 -#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD 0x01ec 0x0478 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x01ec 0x0478 0x054c 3 1 -#define MX6UL_PAD_CSI_DATA02__EIM_AD02 0x01ec 0x0478 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x01ec 0x0478 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC 0x01ec 0x0478 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01ec 0x0478 0x0640 8 5 -#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS 0x01ec 0x0478 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x01f0 0x047c 0x04cc 0 0 -#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x01f0 0x047c 0x0688 1 0 -#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0x01f0 0x047c 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x01f0 0x047c 0x0548 3 0 -#define MX6UL_PAD_CSI_DATA03__EIM_AD03 0x01f0 0x047c 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x01f0 0x047c 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK 0x01f0 0x047c 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS 0x01f0 0x047c 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS 0x01f0 0x047c 0x0640 8 0 -#define MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x01f4 0x0480 0x04dc 0 1 -#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4 0x01f4 0x0480 0x068c 1 2 -#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x01f4 0x0480 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x01f4 0x0480 0x0534 3 1 -#define MX6UL_PAD_CSI_DATA04__EIM_AD04 0x01f4 0x0480 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x01f4 0x0480 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x01f4 0x0480 0x05ec 6 1 -#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1 -#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2 -#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0 -#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1 -#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x01fc 0x0488 0x04e4 0 1 -#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6 0x01fc 0x0488 0x0694 1 2 -#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0x01fc 0x0488 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1 -#define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1 -#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2 -#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0x0200 0x048c 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0200 0x048c 0x0538 3 1 -#define MX6UL_PAD_CSI_DATA07__EIM_AD07 0x0200 0x048c 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0200 0x048c 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x0200 0x048c 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT 0x0200 0x048c 0x0000 8 0 +#define MX6UL_PAD_JTAG_MOD__SJC_MOD 0x0044 0x02d0 0x0000 0 0 +#define MX6UL_PAD_JTAG_MOD__GPT2_CLK 0x0044 0x02d0 0x05a0 1 0 +#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT 0x0044 0x02d0 0x0000 2 0 +#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0 +#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0 +#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0 +#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0 +#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0 +#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0 +#define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0 +#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0 +#define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0 +#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0 +#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x004c 0x02d8 0x05fc 2 0 +#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2 0x004c 0x02d8 0x0000 3 0 +#define MX6UL_PAD_JTAG_TDO__CCM_STOP 0x004c 0x02d8 0x0000 4 0 +#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x004c 0x02d8 0x0000 5 0 +#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT 0x004c 0x02d8 0x0000 6 0 +#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT 0x004c 0x02d8 0x0000 8 0 +#define MX6UL_PAD_JTAG_TDI__SJC_TDI 0x0050 0x02dc 0x0000 0 0 +#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1 0x0050 0x02dc 0x0000 1 0 +#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0050 0x02dc 0x05f8 2 0 +#define MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0050 0x02dc 0x0000 4 0 +#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0050 0x02dc 0x0000 5 0 +#define MX6UL_PAD_JTAG_TDI__MQS_LEFT 0x0050 0x02dc 0x0000 6 0 +#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL 0x0050 0x02dc 0x0000 8 0 +#define MX6UL_PAD_JTAG_TCK__SJC_TCK 0x0054 0x02e0 0x0000 0 0 +#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2 0x0054 0x02e0 0x0000 1 0 +#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x05f4 2 0 +#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0 +#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0 +#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0 +#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0 +#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0 +#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0 +#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1 +#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0 +#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x005c 0x02e8 0x04b8 2 0 +#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1 0x005c 0x02e8 0x0574 3 0 +#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT 0x005c 0x02e8 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x005c 0x02e8 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN 0x005c 0x02e8 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET 0x005c 0x02e8 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B 0x005c 0x02e8 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x0060 0x02ec 0x05b0 0 1 +#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1 0x0060 0x02ec 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0060 0x02ec 0x0664 2 0 +#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2 0x0060 0x02ec 0x057c 3 0 +#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT 0x0060 0x02ec 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x0060 0x02ec 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT 0x0060 0x02ec 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET 0x0060 0x02ec 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x0060 0x02ec 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x0064 0x02f0 0x05a4 0 0 +#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2 0x0064 0x02f0 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR 0x0064 0x02f0 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0 +#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0 +#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0 +#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1 +#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0 +#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0 +#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1 +#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1 +#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x006c 0x02f8 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x006c 0x02f8 0x0644 8 2 +#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x0070 0x02fc 0x057c 0 1 +#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x0070 0x02fc 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID 0x0070 0x02fc 0x04bc 2 0 +#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD 0x0070 0x02fc 0x0530 3 0 +#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x0070 0x02fc 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x0070 0x02fc 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT 0x0070 0x02fc 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0070 0x02fc 0x0644 8 3 +#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x0070 0x02fc 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x0074 0x0300 0x0578 0 0 +#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x0074 0x0300 0x0580 1 0 +#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE 0x0074 0x0300 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK 0x0074 0x0300 0x0000 3 0 +#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP 0x0074 0x0300 0x069c 4 0 +#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0074 0x0300 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT 0x0074 0x0300 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B 0x0074 0x0300 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS 0x0074 0x0300 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS 0x0074 0x0300 0x0620 8 0 +#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0078 0x0304 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0078 0x0304 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE 0x0078 0x0304 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK 0x0078 0x0304 0x0528 3 0 +#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B 0x0078 0x0304 0x0674 4 1 +#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0078 0x0304 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO07__CCM_STOP 0x0078 0x0304 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x0078 0x0304 0x0620 8 1 +#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS 0x0078 0x0304 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x007c 0x0308 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x007c 0x0308 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT 0x007c 0x0308 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC 0x007c 0x0308 0x052c 3 1 +#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x007c 0x0308 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x007c 0x0308 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x007c 0x0308 0x04c0 6 1 +#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x007c 0x0308 0x0640 8 1 +#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS 0x007c 0x0308 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x0080 0x030c 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x0080 0x030c 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN 0x0080 0x030c 0x0618 2 0 +#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC 0x0080 0x030c 0x0524 3 1 +#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B 0x0080 0x030c 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0080 0x030c 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B 0x0080 0x030c 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0080 0x030c 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS 0x0080 0x030c 0x0640 8 2 +#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0084 0x0310 0x0000 0 0 +#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x0084 0x0310 0x0624 0 2 +#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02 0x0084 0x0310 0x0000 1 0 +#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x0084 0x0310 0x05b4 2 0 +#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x04c4 3 1 +#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1 0x0084 0x0310 0x0000 4 0 +#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16 0x0084 0x0310 0x0000 5 0 +#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT 0x0084 0x0310 0x0000 8 0 +#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0088 0x0314 0x0624 0 3 +#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0088 0x0314 0x0000 0 0 +#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03 0x0088 0x0314 0x0000 1 0 +#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x0088 0x0314 0x05b8 2 0 +#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x04c8 3 1 +#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK 0x0088 0x0314 0x0594 4 0 +#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17 0x0088 0x0314 0x0000 5 0 +#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0618 8 1 +#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x008c 0x0318 0x0000 0 0 +#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x008c 0x0318 0x0620 0 2 +#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK 0x008c 0x0318 0x0000 1 0 +#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP 0x008c 0x0318 0x066c 2 1 +#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x04d8 3 0 +#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN 0x008c 0x0318 0x0000 4 0 +#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x008c 0x0318 0x0000 5 0 +#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x069c 8 1 +#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0090 0x031c 0x0620 0 3 +#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x0090 0x031c 0x0000 0 0 +#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER 0x0090 0x031c 0x0000 1 0 +#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x0090 0x031c 0x0668 2 1 +#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x04cc 3 1 +#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT 0x0090 0x031c 0x0000 4 0 +#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0090 0x031c 0x0000 5 0 +#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0674 8 2 +#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0094 0x0320 0x0000 0 0 +#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0094 0x0320 0x062c 0 0 +#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02 0x0094 0x0320 0x0000 1 0 +#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x0094 0x0320 0x05bc 2 0 +#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x04dc 3 0 +#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1 +#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0 +#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0 +#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1 +#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0 +#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0 +#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x0098 0x0324 0x05c0 2 0 +#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x04e0 3 0 +#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2 0x0098 0x0324 0x0590 4 0 +#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x0098 0x0324 0x0000 5 0 +#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE 0x0098 0x0324 0x0000 7 0 +#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0554 8 0 +#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x009c 0x0328 0x0000 0 0 +#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x009c 0x0328 0x0628 0 0 +#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS 0x009c 0x0328 0x0000 1 0 +#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x009c 0x0328 0x0000 2 0 +#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x04e4 3 0 +#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2 0x009c 0x0328 0x0000 4 0 +#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x009c 0x0328 0x0000 5 0 +#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B 0x009c 0x0328 0x0000 7 0 +#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x055c 8 0 +#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x00a0 0x032c 0x0628 0 1 +#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x00a0 0x032c 0x0000 0 0 +#define MX6UL_PAD_UART2_RTS_B__ENET1_COL 0x00a0 0x032c 0x0000 1 0 +#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x00a0 0x032c 0x0588 2 0 +#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x04e8 3 0 +#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3 0x00a0 0x032c 0x0000 4 0 +#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x00a0 0x032c 0x0000 5 0 +#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL 0x00a0 0x032c 0x0000 7 0 +#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0558 8 0 +#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x00a4 0x0330 0x0000 0 0 +#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0 +#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0 +#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0 +#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0 +#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0 +#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2 +#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0 +#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT 0x00a4 0x0330 0x0000 7 0 +#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x04b8 8 1 +#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x00a8 0x0334 0x0634 0 1 +#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0 +#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0 +#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0 +#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0 +#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3 +#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0 +#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0 +#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT 0x00a8 0x0334 0x0000 8 0 +#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x00ac 0x0338 0x0000 0 0 +#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0 +#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0 +#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0 +#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0 +#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0 +#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0 +#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0 +#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x00b0 0x033c 0x0630 0 1 +#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0 +#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0 +#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0 +#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0 +#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0 +#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0 +#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0 +#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x00b4 0x0340 0x0000 0 0 +#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0 +#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0 +#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1 +#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0 +#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0 +#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0 +#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0544 8 1 +#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x00b8 0x0344 0x063c 0 1 +#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0 +#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0 +#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2 +#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0 +#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0 +#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0 +#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0 +#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0 +#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x054c 8 0 +#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0 +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4 +#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0 +#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2 +#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0 +#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0 +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5 +#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0 +#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0 +#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2 +#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0 +#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0 +#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0 +#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0548 8 1 +#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x00c4 0x0350 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0 +#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1 +#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1 +#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3 +#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4 +#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1 +#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2 +#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1 +#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3 +#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0 +#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0 +#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2 +#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0594 8 1 +#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x00e0 0x036c 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1 +#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0590 8 1 +#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x00e4 0x0370 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x00e4 0x0370 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX 0x00e4 0x0370 0x064c 1 1 +#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD 0x00e4 0x0370 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL 0x00e4 0x0370 0x05b4 3 1 +#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x00e4 0x0370 0x0578 4 1 +#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x00e4 0x0370 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x00e4 0x0370 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR 0x00e4 0x0370 0x0000 8 0 +#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2 +#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1 +#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x00e8 0x0374 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0664 8 1 +#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x00ec 0x0378 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0x00ec 0x0378 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX 0x00ec 0x0378 0x0654 1 0 +#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B 0x00ec 0x0378 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL 0x00ec 0x0378 0x05bc 3 1 +#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26 0x00ec 0x0378 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x00ec 0x0378 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x00ec 0x0378 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M 0x00ec 0x0378 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x00f0 0x037c 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0x00f0 0x037c 0x0654 1 1 +#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX 0x00f0 0x037c 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN 0x00f0 0x037c 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA 0x00f0 0x037c 0x05c0 3 1 +#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0 +#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD 0x00f4 0x0380 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x00f4 0x0380 0x0564 3 0 +#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03 0x00f4 0x0380 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x00f4 0x0380 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x00f4 0x0380 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR 0x00f4 0x0380 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1 +#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0 +#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x00f8 0x0384 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0660 8 1 +#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00fc 0x0388 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x00fc 0x0388 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS 0x00fc 0x0388 0x0658 1 0 +#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B 0x00fc 0x0388 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x00fc 0x0388 0x0568 3 0 +#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00fc 0x0388 0x057c 4 2 +#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x00fc 0x0388 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x00fc 0x0388 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x04bc 8 1 +#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x0100 0x038c 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1 +#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0 +#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY 0x0100 0x038c 0x0000 8 0 +#define MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x0104 0x0390 0x0000 0 0 +#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0 +#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0 +#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2 +#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0 +#define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0 +#define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0 +#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0 +#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x0108 0x0394 0x0000 0 0 +#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E 0x0108 0x0394 0x0000 1 0 +#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x0108 0x0394 0x063c 2 3 +#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0x0108 0x0394 0x0000 2 0 +#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC 0x0108 0x0394 0x060c 3 0 +#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B 0x0108 0x0394 0x0000 4 0 +#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x0108 0x0394 0x0000 5 0 +#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY 0x0108 0x0394 0x0000 8 0 +#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x010c 0x0398 0x05dc 0 0 +#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS 0x010c 0x0398 0x0000 1 0 +#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x010c 0x0398 0x0000 2 0 +#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS 0x010c 0x0398 0x0638 2 2 +#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK 0x010c 0x0398 0x0608 3 0 +#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB 0x010c 0x0398 0x0000 4 0 +#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x010c 0x0398 0x0000 5 0 +#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1 0x010c 0x0398 0x0000 8 0 +#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x0110 0x039c 0x0000 0 0 +#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1 +#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3 +#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0 +#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0 +#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0 +#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0 +#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0 +#define MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x0114 0x03a0 0x0000 0 0 +#define MX6UL_PAD_LCD_RESET__LCDIF_CS 0x0114 0x03a0 0x0000 1 0 +#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI 0x0114 0x03a0 0x0000 2 0 +#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA 0x0114 0x03a0 0x0000 3 0 +#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x0114 0x03a0 0x0000 4 0 +#define MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0114 0x03a0 0x0000 5 0 +#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2 +#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2 +#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01 0x011c 0x03a8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x05ec 8 0 +#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2 +#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02 0x0120 0x03ac 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x05e8 8 0 +#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2 +#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2 +#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04 0x0128 0x03b4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA 0x0128 0x03b4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3 +#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05 0x012c 0x03b8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1 0x012c 0x03b8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2 +#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06 0x0130 0x03bc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2 0x0130 0x03bc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3 +#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0 +#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07 0x0134 0x03c0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2 +#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0584 8 2 +#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0588 8 2 +#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1 +#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1 +#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x068c 8 0 +#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0690 8 0 +#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2 +#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0694 8 0 +#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3 +#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0698 8 0 +#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0678 8 1 +#define MX6UL_PAD_LCD_DATA19__EIM_DATA11 0x0164 0x03f0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x0164 0x03f0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27 0x0164 0x03f0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0670 8 1 +#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x067c 8 1 +#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x0168 0x03f4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2 +#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0 +#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3 +#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0680 8 1 +#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0 +#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0684 8 0 +#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0 +#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0688 8 1 +#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0 +#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2 +#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0 +#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0 +#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0 +#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0 +#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0 +#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0 +#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2 +#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0 +#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0 +#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0 +#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0 +#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2 +#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2 +#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1 +#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2 +#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0190 0x041c 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x0190 0x041c 0x068c 1 1 +#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02 0x0190 0x041c 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x0190 0x041c 0x0564 3 1 +#define MX6UL_PAD_NAND_DATA04__EIM_AD12 0x0190 0x041c 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x0190 0x041c 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x0190 0x041c 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX 0x0190 0x041c 0x062c 8 2 +#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0194 0x0420 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x0194 0x0420 0x0690 1 1 +#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03 0x0194 0x0420 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x0194 0x0420 0x056c 3 1 +#define MX6UL_PAD_NAND_DATA05__EIM_AD13 0x0194 0x0420 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07 0x0194 0x0420 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x0194 0x0420 0x062c 8 3 +#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX 0x0194 0x0420 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0198 0x0424 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x0198 0x0424 0x0694 1 1 +#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK 0x0198 0x0424 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x0198 0x0424 0x0568 3 1 +#define MX6UL_PAD_NAND_DATA06__EIM_AD14 0x0198 0x0424 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x0198 0x0424 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x0198 0x0424 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS 0x0198 0x0424 0x0628 8 4 +#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1 +#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5 +#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS 0x019c 0x0428 0x0000 8 0 +#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x01a0 0x042c 0x0000 0 0 +#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x01a0 0x042c 0x0000 1 0 +#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS 0x01a0 0x042c 0x0000 2 0 +#define MX6UL_PAD_NAND_ALE__PWM3_OUT 0x01a0 0x042c 0x0000 3 0 +#define MX6UL_PAD_NAND_ALE__EIM_ADDR17 0x01a0 0x042c 0x0000 4 0 +#define MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x01a0 0x042c 0x0000 5 0 +#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1 0x01a0 0x042c 0x0000 8 0 +#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x01a4 0x0430 0x0000 0 0 +#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x01a4 0x0430 0x0000 1 0 +#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x01a4 0x0430 0x0000 2 0 +#define MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x01a4 0x0430 0x0000 3 0 +#define MX6UL_PAD_NAND_WP_B__EIM_BCLK 0x01a4 0x0430 0x0000 4 0 +#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x01a4 0x0430 0x0000 5 0 +#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY 0x01a4 0x0430 0x0000 8 0 +#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0 +#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0 +#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0 +#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0 +#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0 +#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0 +#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0 +#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX 0x01a8 0x0434 0x0634 8 2 +#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x01ac 0x0438 0x0000 0 0 +#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x01ac 0x0438 0x0000 1 0 +#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x01ac 0x0438 0x0000 2 0 +#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x01ac 0x0438 0x0554 3 1 +#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B 0x01ac 0x0438 0x0000 4 0 +#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x01ac 0x0438 0x0000 5 0 +#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x01ac 0x0438 0x0634 8 3 +#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX 0x01ac 0x0438 0x0000 8 0 +#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x01b0 0x043c 0x0000 0 0 +#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x01b0 0x043c 0x0000 1 0 +#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x01b0 0x043c 0x0000 2 0 +#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x01b0 0x043c 0x055c 3 1 +#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18 0x01b0 0x043c 0x0000 4 0 +#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x01b0 0x043c 0x0000 5 0 +#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x01b0 0x043c 0x0000 8 0 +#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS 0x01b0 0x043c 0x0630 8 2 +#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x01b4 0x0440 0x0000 0 0 +#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x01b4 0x0440 0x0000 1 0 +#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x01b4 0x0440 0x0000 2 0 +#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x01b4 0x0440 0x0558 3 1 +#define MX6UL_PAD_NAND_CLE__EIM_ADDR16 0x01b4 0x0440 0x0000 4 0 +#define MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x01b4 0x0440 0x0000 5 0 +#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x01b4 0x0440 0x0630 8 3 +#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS 0x01b4 0x0440 0x0000 8 0 +#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x01b8 0x0444 0x0000 0 0 +#define MX6UL_PAD_NAND_DQS__CSI_FIELD 0x01b8 0x0444 0x0530 1 1 +#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x01b8 0x0444 0x0000 2 0 +#define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0 +#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0 +#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0 +#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0 +#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x061c 8 1 +#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0 +#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0 +#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC 0x01bc 0x0448 0x0000 2 0 +#define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0 +#define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0 +#define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0 +#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0 +#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0 +#define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0 +#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0 +#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0 +#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3 +#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0 +#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0 +#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0664 8 2 +#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x01c4 0x0450 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3 0x01c4 0x0450 0x0000 1 0 +#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC 0x01c4 0x0450 0x05fc 2 1 +#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX 0x01c4 0x0450 0x0000 3 0 +#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21 0x01c4 0x0450 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x01c4 0x0450 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x04b8 8 2 +#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x01c8 0x0454 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA1__GPT2_CLK 0x01c8 0x0454 0x05a0 1 1 +#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK 0x01c8 0x0454 0x05f8 2 1 +#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX 0x01c8 0x0454 0x0584 3 3 +#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22 0x01c8 0x0454 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x01c8 0x0454 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR 0x01c8 0x0454 0x0000 8 0 +#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x01cc 0x0458 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1 0x01cc 0x0458 0x0598 1 1 +#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA 0x01cc 0x0458 0x05f4 2 1 +#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX 0x01cc 0x0458 0x0000 3 0 +#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23 0x01cc 0x0458 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x01cc 0x0458 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1 0x01cc 0x0458 0x0000 6 0 +#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0660 8 2 +#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x01d0 0x045c 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2 0x01d0 0x045c 0x059c 1 1 +#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA 0x01d0 0x045c 0x0000 2 0 +#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX 0x01d0 0x045c 0x0588 3 3 +#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24 0x01d0 0x045c 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x01d0 0x045c 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2 0x01d0 0x045c 0x0000 6 0 +#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x04bc 8 2 +#define MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x01d4 0x0460 0x0000 0 0 +#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B 0x01d4 0x0460 0x0674 1 0 +#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B 0x01d4 0x0460 0x0000 2 0 +#define MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x01d4 0x0460 0x05a8 3 0 +#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B 0x01d4 0x0460 0x0000 4 0 +#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x01d4 0x0460 0x0000 5 0 +#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL 0x01d4 0x0460 0x0000 6 0 +#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x01d4 0x0460 0x0000 8 0 +#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x01d4 0x0460 0x064c 8 0 +#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x01d8 0x0464 0x0528 0 1 +#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP 0x01d8 0x0464 0x069c 1 2 +#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B 0x01d8 0x0464 0x0000 2 0 +#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x01d8 0x0464 0x05a4 3 2 +#define MX6UL_PAD_CSI_PIXCLK__EIM_OE 0x01d8 0x0464 0x0000 4 0 +#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x01d8 0x0464 0x0000 5 0 +#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 0x01d8 0x0464 0x0000 6 0 +#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x01d8 0x0464 0x064c 8 3 +#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x01d8 0x0464 0x0000 8 0 +#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x01dc 0x0468 0x052c 0 0 +#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x01dc 0x0468 0x0670 1 0 +#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK 0x01dc 0x0468 0x0000 2 0 +#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x01dc 0x0468 0x05b0 3 0 +#define MX6UL_PAD_CSI_VSYNC__EIM_RW 0x01dc 0x0468 0x0000 4 0 +#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x01dc 0x0468 0x0000 5 0 +#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x01dc 0x0468 0x0000 6 0 +#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x01dc 0x0468 0x0648 8 0 +#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x01dc 0x0468 0x0000 8 0 +#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x01e0 0x046c 0x0524 0 0 +#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x01e0 0x046c 0x0678 1 0 +#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD 0x01e0 0x046c 0x0000 2 0 +#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x01e0 0x046c 0x05ac 3 0 +#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B 0x01e0 0x046c 0x0000 4 0 +#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x01e0 0x046c 0x0000 5 0 +#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x01e0 0x046c 0x0000 6 0 +#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x01e0 0x046c 0x0000 8 0 +#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x01e0 0x046c 0x0648 8 1 +#define MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x01e4 0x0470 0x04c4 0 0 +#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x01e4 0x0470 0x067c 1 0 +#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B 0x01e4 0x0470 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x01e4 0x0470 0x0544 3 0 +#define MX6UL_PAD_CSI_DATA00__EIM_AD00 0x01e4 0x0470 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x01e4 0x0470 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT 0x01e4 0x0470 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x01e4 0x0470 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX 0x01e4 0x0470 0x0644 8 0 +#define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0 +#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0 +#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1 +#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1 +#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x01ec 0x0478 0x0684 1 2 +#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD 0x01ec 0x0478 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x01ec 0x0478 0x054c 3 1 +#define MX6UL_PAD_CSI_DATA02__EIM_AD02 0x01ec 0x0478 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x01ec 0x0478 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC 0x01ec 0x0478 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01ec 0x0478 0x0640 8 5 +#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS 0x01ec 0x0478 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x01f0 0x047c 0x04cc 0 0 +#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x01f0 0x047c 0x0688 1 0 +#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0x01f0 0x047c 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x01f0 0x047c 0x0548 3 0 +#define MX6UL_PAD_CSI_DATA03__EIM_AD03 0x01f0 0x047c 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x01f0 0x047c 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK 0x01f0 0x047c 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS 0x01f0 0x047c 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS 0x01f0 0x047c 0x0640 8 0 +#define MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x01f4 0x0480 0x04dc 0 1 +#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4 0x01f4 0x0480 0x068c 1 2 +#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x01f4 0x0480 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x01f4 0x0480 0x0534 3 1 +#define MX6UL_PAD_CSI_DATA04__EIM_AD04 0x01f4 0x0480 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x01f4 0x0480 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x01f4 0x0480 0x05ec 6 1 +#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x066c 8 2 +#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1 +#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2 +#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1 +#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0668 8 2 +#define MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x01fc 0x0488 0x04e4 0 1 +#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6 0x01fc 0x0488 0x0694 1 2 +#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0x01fc 0x0488 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1 +#define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1 +#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2 +#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0x0200 0x048c 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0200 0x048c 0x0538 3 1 +#define MX6UL_PAD_CSI_DATA07__EIM_AD07 0x0200 0x048c 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0200 0x048c 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x0200 0x048c 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT 0x0200 0x048c 0x0000 8 0 #endif /* __DTS_IMX6UL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 99b646506fc9..71778992f03d 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx6ul-clock.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx6ul-pinfunc.h" #include "skeleton.dtsi" @@ -140,6 +141,39 @@ reg = <0x00900000 0x20000>; }; + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6UL_CLK_APBHDMA>; + }; + + gpmi: gpmi-nand@01806000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clks IMX6UL_CLK_GPMI_IO>, + <&clks IMX6UL_CLK_GPMI_APB>, + <&clks IMX6UL_CLK_GPMI_BCH>, + <&clks IMX6UL_CLK_GPMI_BCH_APB>, + <&clks IMX6UL_CLK_PER_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + aips1: aips-bus@02000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -234,6 +268,126 @@ clock-names = "ipg", "per"; status = "disabled"; }; + + sai1: sai@02028000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_SAI1_IPG>, + <&clks IMX6UL_CLK_SAI1>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma 35 24 0>, + <&sdma 36 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai2: sai@0202c000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_SAI2_IPG>, + <&clks IMX6UL_CLK_SAI2>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma 37 24 0>, + <&sdma 38 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@02030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_SAI3_IPG>, + <&clks IMX6UL_CLK_SAI3>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma 39 24 0>, + <&sdma 40 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + }; + + tsc: tsc@02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + status = "disabled"; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PWM1>, + <&clks IMX6UL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PWM2>, + <&clks IMX6UL_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PWM3>, + <&clks IMX6UL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PWM4>, + <&clks IMX6UL_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + can1: flexcan@02090000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, + <&clks IMX6UL_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can2: flexcan@02094000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN2_IPG>, + <&clks IMX6UL_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; }; gpt1: gpt@02098000 { @@ -317,6 +471,14 @@ status = "disabled"; }; + kpp: kpp@020b8000 { + compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_KPP>; + status = "disabled"; + }; + wdog1: wdog@020bc000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; @@ -487,49 +649,65 @@ compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_GPT2_BUS>, + <&clks IMX6UL_CLK_GPT2_SERIAL>; clock-names = "ipg", "per"; }; + sdma: sdma@020ec000 { + compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma", + "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_SDMA>, + <&clks IMX6UL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + pwm5: pwm@020f0000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f0000 0x4000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_PWM5>, + <&clks IMX6UL_CLK_PWM5>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm6: pwm@020f4000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f4000 0x4000>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_PWM6>, + <&clks IMX6UL_CLK_PWM6>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm7: pwm@020f8000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f8000 0x4000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_PWM7>, + <&clks IMX6UL_CLK_PWM7>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm8: pwm@020fc000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020fc000 0x4000>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_PWM8>, + <&clks IMX6UL_CLK_PWM8>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; }; @@ -590,17 +768,6 @@ status = "disabled"; }; - tsc: tsc@02040000 { - compatible = "fsl,imx6ul-tsc"; - reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_IPG>, - <&clks IMX6UL_CLK_ADC2>; - clock-names = "tsc", "adc"; - status = "disabled"; - }; - usdhc1: usdhc@02190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; @@ -672,6 +839,17 @@ reg = <0x021b0000 0x4000>; }; + lcdif: lcdif@021c8000 { + compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + reg = <0x021c8000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, + <&clks IMX6UL_CLK_LCDIF_APB>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + qspi: qspi@021e0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts index d63c597c0783..f8a868552707 100644 --- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts @@ -22,7 +22,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - enable-sdio-wakeup; + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index b2c453662905..b267f79e3059 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -296,7 +296,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - enable-sdio-wakeup; + wakeup-source; keep-power-in-suspend; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 25ad30978740..b5a50e0e7ff1 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -119,6 +119,15 @@ clock-output-names = "osc"; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + }; + etr@30086000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x30086000 0x1000>; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 3807d4f46ef7..b82f0e6d9a63 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -57,7 +57,7 @@ }; fpga { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts new file mode 100644 index 000000000000..5bfd9e7845f2 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -0,0 +1,32 @@ +/* + * Device Tree Source for K2G EVM + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; + +#include "keystone-k2g.dtsi" + +/ { + compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; + model = "Texas Instruments K2G General Purpose EVM"; + + memory { + device_type = "memory"; + reg = <0x00000008 0x00000000 0x00000000 0x80000000>; + }; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi new file mode 100644 index 000000000000..7ff2796ae925 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -0,0 +1,89 @@ +/* + * Device Tree Source for K2G SOC + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "ti,k2g","ti,keystone"; + model = "Texas Instruments K2G SoC"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + }; + + gic: interrupt-controller@02561000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x02561000 0x0 0x1000>, + <0x0 0x02562000 0x0 0x2000>, + <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02566000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,keystone","simple-bus"; + ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + + uart0: serial@02530c00 { + compatible = "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02530c00 0x100>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clock-frequency = <200000000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index bf4143c6cb8f..b84af3da8c84 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -14,7 +14,7 @@ #include "kirkwood-synology.dtsi" / { - model = "Synology DS111"; + model = "Synology DS112"; compatible = "synology,ds111", "marvell,kirkwood"; memory { diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi new file mode 100644 index 000000000000..6548e68a20d0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi @@ -0,0 +1,192 @@ +/* + * Device Tree common file for kirkwood-6282 based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" +#include "kirkwood-linkstation.dtsi" + +/ { + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_keys { + function-button { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + red-alarm-led { + label = "linkstation:red:alarm"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + }; + + red-function-led { + label = "linkstation:red:function"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + amber-info-led { + label = "linkstation:amber:info"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + + blue-function-led { + label = "linkstation:blue:function"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + + blue-power-led { + label = "linkstation:blue:power"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio0 17 GPIO_ACTIVE_LOW + &gpio0 16 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + regulators { + usb_power: regulator@1 { + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + + hdd_power0: regulator@2 { + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi new file mode 100644 index 000000000000..cf2e69f0d54f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi @@ -0,0 +1,186 @@ +/* + * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-linkstation.dtsi" + +/ { + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_keys { + function-button { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + red-alarm-led { + label = "linkstation:red:alarm"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + + red-function-led { + label = "linkstation:red:function"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + amber-info-led { + label = "linkstation:amber:info"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + blue-function-led { + label = "linkstation:blue:function"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + blue-power-led { + label = "linkstation:blue:power"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + usb_power: regulator@1 { + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + hdd_power0: regulator@2 { + gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts new file mode 100644 index 000000000000..6dc0df2969f0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts @@ -0,0 +1,135 @@ +/* + * Device Tree file for Buffalo Linkstation LS-QVL + * + * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net> + * + * Based on kirkwood-linkstation-lswvl.dts, + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-QVL"; + compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_hdderr2: pmx-led-hdderr2 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_led_hdderr3: pmx-led-hdderr3 { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1 + &pmx_led_hdderr2 + &pmx_led_hdderr3>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + }; + + red-hdderr2-led { + label = "linkstation:red:hdderr2"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + red-hdderr3-led { + label = "linkstation:red:hdderr3"; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts new file mode 100644 index 000000000000..edcba5c44b05 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts @@ -0,0 +1,57 @@ +/* + * Device Tree file for Buffalo Linkstation LS-VL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-VL"; + compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts new file mode 100644 index 000000000000..4b6450186af5 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts @@ -0,0 +1,57 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WSXL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-duo-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WSXL"; + compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts new file mode 100644 index 000000000000..954ec1d5b6dc --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts @@ -0,0 +1,112 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WVL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-WVL"; + compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts new file mode 100644 index 000000000000..ecd5c12a805d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts @@ -0,0 +1,116 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WXL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-duo-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WXL"; + compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi new file mode 100644 index 000000000000..69061b6e987b --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -0,0 +1,202 @@ +/* + * Device Tree common file for kirkwood based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p40", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_button_function &pmx_power_switch + &pmx_power_auto_switch>; + pinctrl-names = "default"; + + function-button { + label = "Function Button"; + linux,code = <KEY_OPTION>; + }; + + power-on-switch { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + }; + + power-auto-switch { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue>; + pinctrl-names = "default"; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + + hdd_power0: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts deleted file mode 100644 index 09eed3cea0af..000000000000 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Device Tree file for Buffalo Linkstation LS-WVL/VL - * - * Copyright (C) 2015, rogershimizu@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6282.dtsi" - -/ { - model = "Buffalo Linkstation LS-WVL/VL"; - compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory { /* 256 MB */ - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_power_hdd0: pmx-power-hdd0 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - pmx_led_hdderr0: pmx-led-hdderr0 { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_led_hdderr1: pmx-led-hdderr1 { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_led_function_red: pmx-led-function-red { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_button_function: pmx-button-function { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p40", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x60000>; - label = "uboot"; - read-only; - }; - - partition@60000 { - reg = <0x60000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@70000 { - reg = <0x70000 0x10000>; - label = "uboot_env"; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_function &pmx_power_switch - &pmx_power_auto_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Function Button"; - linux,code = <KEY_OPTION>; - gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; - gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; - }; - - button@3 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_led_function_blue - &pmx_led_hdderr0 - &pmx_led_hdderr1>; - pinctrl-names = "default"; - - led@1 { - label = "lswvl:red:alarm"; - gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; - }; - - led@2 { - label = "lswvl:red:func"; - gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; - }; - - led@3 { - label = "lswvl:amber:info"; - gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; - }; - - led@4 { - label = "lswvl:blue:func"; - gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; - }; - - led@5 { - label = "lswvl:blue:power"; - gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - led@6 { - label = "lswvl:red:hdderr0"; - gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; - }; - - led@7 { - label = "lswvl:red:hdderr1"; - gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - gpios = <&gpio0 17 GPIO_ACTIVE_LOW - &gpio0 16 GPIO_ACTIVE_LOW>; - - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; - }; - - restart_poweroff { - compatible = "restart-poweroff"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - hdd_power0: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - hdd_power1: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "HDD1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts deleted file mode 100644 index f5db16a08597..000000000000 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Device Tree file for Buffalo Linkstation LS-WXL/WSXL - * - * Copyright (C) 2015, rogershimizu@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Buffalo Linkstation LS-WXL/WSXL"; - compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_power_hdd0: pmx-power-hdd0 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_led_hdderr0: pmx-led-hdderr0 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_led_hdderr1: pmx-led-hdderr1 { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - pmx_led_function_red: pmx-led-function-red { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_button_function: pmx-button-function { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p40", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x60000>; - label = "uboot"; - read-only; - }; - - partition@60000 { - reg = <0x60000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@70000 { - reg = <0x70000 0x10000>; - label = "uboot_env"; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_function &pmx_power_switch - &pmx_power_auto_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Function Button"; - linux,code = <KEY_OPTION>; - gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; - gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; - }; - - button@3 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; - gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_led_function_blue - &pmx_led_hdderr0 - &pmx_led_hdderr1>; - pinctrl-names = "default"; - - led@1 { - label = "lswxl:blue:func"; - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; - }; - - led@2 { - label = "lswxl:red:alarm"; - gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; - }; - - led@3 { - label = "lswxl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - led@4 { - label = "lswxl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - }; - - led@5 { - label = "lswxl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - led@6 { - label = "lswxl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - - led@7 { - label = "lswxl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - gpios = <&gpio0 47 GPIO_ACTIVE_LOW - &gpio0 48 GPIO_ACTIVE_LOW>; - - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; - }; - - restart_poweroff { - compatible = "restart-poweroff"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; - }; - hdd_power0: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; - hdd_power1: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "HDD1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy1: ethernet-phy@8 { - device_type = "ethernet-phy"; - reg = <8>; - }; -}; - -ð1 { - status = "okay"; - - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts index 887b9c1fee43..96ff59d68f44 100644 --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts @@ -20,6 +20,9 @@ compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ocp@f1000000 { + audio-controller@a0000 { + status = "okay"; + }; i2c@11000 { status = "okay"; clock-frequency = <400000>; @@ -27,6 +30,7 @@ cs42l51: cs42l51@4a { compatible = "cirrus,cs42l51"; reg = <0x4a>; + #sound-dai-cells = <0>; }; }; }; @@ -37,7 +41,7 @@ simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { - sound-dai = <&audio0>; + sound-dai = <&audio0 0>; }; simple-audio-card,codec { diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index d3330dadf7ed..24f1d30970a0 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -40,7 +40,7 @@ pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; pinctrl-names = "default"; - pmx_select28: pmx-select-uart-sd { + pmx_select28: pmx-select-rs232-rs485 { marvell,pins = "mpp28"; marvell,function = "gpio"; }; @@ -48,7 +48,7 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; - pmx_select34: pmx-select-rs232-rs484 { + pmx_select34: pmx-select-uart-sd { marvell,pins = "mpp34"; marvell,function = "gpio"; }; @@ -65,6 +65,43 @@ status = "okay"; cd-gpios = <&gpio0 29 9>; }; + gpio@10100 { + p28 { + gpio-hog; + gpios = <28 GPIO_ACTIVE_HIGH>; + /* + * SelRS232or485 selects between RS-232 or RS-485 + * mode for the second UART. + * + * Low: RS-232 + * High: RS-485 + * + * To use the second UART, you need to change also + * the SelUARTorSD. + */ + output-low; + line-name = "SelRS232or485"; + }; + }; + gpio@10140 { + p2 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + /* + * SelUARTorSD selects between the second UART + * (serial@12100) and SD (mvsdio@90000). + * + * Low: UART + * High: SD + * + * When changing this line make sure the newly + * selected device node is enabled and the + * previously selected device node is disabled. + */ + output-high; /* Select SD by default */ + line-name = "SelUARTorSD"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts index 1db6f2c506cc..8082d64266a3 100644 --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -131,6 +131,7 @@ chip-delay = <40>; status = "okay"; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7b5a4a18f49c..7445a15e259d 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -381,7 +381,7 @@ audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts new file mode 100644 index 000000000000..da8598402ab8 --- /dev/null +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -0,0 +1,268 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "logicpd-som-lv.dtsi" +#include "omap-gpmc-smsc9221.dtsi" + +/ { + model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + + sysboot2 { + label = "gpio3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* gpio_111 / uP_GPIO_3 */ + linux,code = <BTN_0>; + wakeup-source; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3logic"; + ti,mcbsp = <&mcbsp2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &led_pins_wkup>; + + led1 { + label = "led1"; + gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* gpio133 */ + linux,default-trigger = "cpu0"; + }; + + led2 { + label = "led2"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* gpio11 */ + linux,default-trigger = "none"; + }; + }; +}; + +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +&vaux4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&mcbsp2 { + status = "okay"; +}; + +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +&gpmc { + ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&lan9221_pins>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; /* gpio_152 */ + reg = <1 0 0xff>; + }; +}; + +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&video_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins1>; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <16>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + video_reg: video_reg { + compatible = "regulator-fixed"; + regulator-name = "fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "28"; + status = "okay"; + /* default-on; */ + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_pin>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <2>; + vsync-len = <11>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + + bl: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&twl_pwm 0 5000000>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */ + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ + cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cap-power-off-card; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_xclkb.gpio_111 / uP_GPIO_3*/ + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */ + >; + }; + + lan9221_pins: pinmux_lan9221_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/ + >; + }; + + lcd_enable_pin: pinmux_lcd_enable_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ + >; + }; + + dss_dpi_pins1: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ + >; + }; +}; + +&omap3_pmx_wkup { + led_pins_wkup: pinmux_led_pins_wkup { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 / uP_GPIO_1 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ + >; + }; + + mmc1_cd: pinmux_mmc1_cd { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ + >; + }; +}; + + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb_otg_pins>; + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi new file mode 100644 index 000000000000..365f39ff58bb --- /dev/null +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -0,0 +1,265 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 3 0>; /* gpio_3 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ + }; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + linux,mtd-name = "micron,mt29f4g16abbda3w"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + gpmc,page-burst-access-ns = <5>; + gpmc,cycle2cycle-delay-ns = <50>; + + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */ + + x-loader@0 { + label = "x-loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "u-boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "u-boot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "fs"; + reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; + +&mmc3 { + interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + pinctrl-0 = <&mmc3_pins>; + pinctrl-names = "default"; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1273"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + ref-clock-frequency = <26000000>; + }; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; + + mmc3_pins: pinmux_mm3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ + >; + }; + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ + >; + }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + hsusb_otg_pins: pinmux_hsusb_otg_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + >; + }; + + +}; + +&omap3_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_reset_pin>; + hsusb2_reset_pin: pinmux_hsusb1_reset_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl { + twl_power: power { + compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index fb13f18c08cc..015f795a8d19 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -11,7 +11,7 @@ #include "omap-gpmc-smsc9221.dtsi" / { - model = "LogicPD Zoom DM3730 Torpedo Development Kit"; + model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; gpio_keys { @@ -71,6 +71,15 @@ linux,default-trigger = "none"; }; }; + + pwm10: dmtimer-pwm@10 { + compatible = "ti,omap-dmtimer-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + ti,timers = <&timer10>; + #pwm-cells = <3>; + }; + }; &vaux1 { @@ -93,7 +102,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; @@ -111,6 +121,7 @@ &dss { status = "ok"; vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&video_reg>; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins1>; port { @@ -126,13 +137,22 @@ display0 = &lcd0; }; + video_reg: video_reg { + pinctrl-names = "default"; + pinctrl-0 = <&panel_pwr_pins>; + compatible = "regulator-fixed"; + regulator-name = "fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + }; + lcd0: display@0 { compatible = "panel-dpi"; label = "15"; status = "okay"; /* default-on; */ pinctrl-names = "default"; - enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ port { lcd_in: endpoint { @@ -158,13 +178,13 @@ }; bl: backlight { - compatible = "gpio-backlight"; + compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&backlight_pins>; - - gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>, /* gpio_56 */ - <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ - default-on; + pwms = <&pwm10 0 5000000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ }; }; @@ -186,6 +206,12 @@ >; }; + pwm_pins: pinmux_pwm_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ + >; + }; + led_pins: pinmux_led_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ @@ -212,37 +238,60 @@ backlight_pins: pinmux_backlight_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */ - OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ + >; + }; + + isp_pins: pinmux_isp_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ + + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ + >; + }; + + panel_pwr_pins: pinmux_panel_pwr_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ >; }; dss_dpi_pins1: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ >; }; }; @@ -268,6 +317,24 @@ }; }; +&i2c2 { + mt9p031@48 { + compatible = "aptina,mt9p031"; + reg = <0x48>; + clocks = <&isp 0>; + vaa-supply = <&vaux4>; + vdd-supply = <&vaux4>; + vdd_io-supply = <&vaux4>; + port { + mt9p031_out: endpoint { + input-clock-frequency = <24000000>; + pixel-clock-frequency = <72000000>; + remote-endpoint = <&ccdc_ep>; + }; + }; + }; +}; + &i2c3 { touchscreen: tsc2004@48 { compatible = "ti,tsc2004"; @@ -289,12 +356,45 @@ }; }; +&mcspi1 { + at25@0 { + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; +}; + +&isp { + pinctrl-names = "default"; + pinctrl-0 = <&isp_pins>; + ports { + port@0 { + reg = <0>; + ccdc_ep: endpoint { + remote-endpoint = <&mt9p031_out>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + &uart1 { interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; }; /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ &usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb_otg_pins>; interface-type = <0>; usb-phy = <&usb2_phy>; phys = <&usb2_phy>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 7fed0bd4f3de..5e9a13c0eaf7 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -35,11 +35,15 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; gpmc,sync-clk-ps = <0>; @@ -110,14 +114,11 @@ &i2c3 { clock-frequency = <400000>; -}; - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; + at24@50 { + compatible = "at24,24c02"; + readonly; + reg = <0x50>; + }; }; /* @@ -143,6 +144,7 @@ interrupt-parent = <&gpio5>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; }; }; @@ -174,6 +176,31 @@ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ >; }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + hsusb_otg_pins: pinmux_hsusb_otg_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + >; + }; }; &uart2 { @@ -182,6 +209,11 @@ pinctrl-0 = <&uart2_pins>; }; +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + &omap3_pmx_core2 { mmc3_core2_pins: pinmux_mmc3_core2_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index c85cf979725e..c58d8da9ea2a 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -13,6 +13,9 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/lpc32xx-clock.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; @@ -28,6 +31,22 @@ }; }; + clocks { + xtal_32k: xtal_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k"; + }; + + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "xtal"; + }; + }; + ahb { #address-cells = <1>; #size-cells = <1>; @@ -41,20 +60,24 @@ slc: flash@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; + clocks = <&clk LPC32XX_CLK_SLC>; status = "disabled"; }; mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; reg = <0x200a8000 0x11000>; - interrupts = <11 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MLC>; status = "disabled"; }; dma: dma@31000000 { compatible = "arm,pl080", "arm,primecell"; reg = <0x31000000 0x1000>; - interrupts = <0x1c 0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_DMA>; + clock-names = "apb_pclk"; }; usb { @@ -69,43 +92,60 @@ ohci: ohci@0 { compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x0 0x300>; - interrupts = <0x3b 0>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_HOST>; status = "disabled"; }; usbd: usbd@0 { compatible = "nxp,lpc3220-udc"; reg = <0x0 0x300>; - interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + interrupts = <61 IRQ_TYPE_LEVEL_HIGH>, + <62 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <58 IRQ_TYPE_LEVEL_LOW>; + clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; status = "disabled"; }; i2cusb: i2c@300 { compatible = "nxp,pnx-i2c"; reg = <0x300 0x100>; - interrupts = <0x3f 0>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_I2C>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; }; + + usbclk: clock-controller@f00 { + compatible = "nxp,lpc3220-usb-clk"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + }; }; clcd: clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; - interrupts = <0x0e 0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_LCD>; + clock-names = "apb_pclk"; status = "disabled"; }; mac: ethernet@31060000 { compatible = "nxp,lpc-eth"; reg = <0x31060000 0x1000>; - interrupts = <0x1d 0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MAC>; }; emc: memory-controller@31080000 { compatible = "arm,pl175", "arm,primecell"; reg = <0x31080000 0x1000>; + clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>; + clock-names = "mpmcclk", "apb_pclk"; #address-cells = <1>; #size-cells = <1>; @@ -125,7 +165,9 @@ ssp0: ssp@20084000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; - interrupts = <0x14 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP0>; + clock-names = "apb_pclk"; }; spi1: spi@20088000 { @@ -136,7 +178,9 @@ ssp1: ssp@2008c000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; - interrupts = <0x15 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP1>; + clock-names = "apb_pclk"; }; spi2: spi@20090000 { @@ -152,7 +196,10 @@ sd: sd@20098000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; - interrupts = <0x0f 0>, <0x0d 0>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SD>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -166,55 +213,57 @@ /* actually, ns16550a w/ 64 byte fifos! */ compatible = "nxp,lpc3220-uart"; reg = <0x40090000 0x1000>; - interrupts = <9 0>; - clock-frequency = <13000000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART5>; status = "disabled"; }; uart3: serial@40080000 { compatible = "nxp,lpc3220-uart"; reg = <0x40080000 0x1000>; - interrupts = <7 0>; - clock-frequency = <13000000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART3>; status = "disabled"; }; uart4: serial@40088000 { compatible = "nxp,lpc3220-uart"; reg = <0x40088000 0x1000>; - interrupts = <8 0>; - clock-frequency = <13000000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART4>; status = "disabled"; }; uart6: serial@40098000 { compatible = "nxp,lpc3220-uart"; reg = <0x40098000 0x1000>; - interrupts = <10 0>; - clock-frequency = <13000000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART6>; status = "disabled"; }; i2c1: i2c@400A0000 { compatible = "nxp,pnx-i2c"; reg = <0x400A0000 0x100>; - interrupts = <0x33 0>; + interrupts = <51 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; + clocks = <&clk LPC32XX_CLK_I2C1>; }; i2c2: i2c@400A8000 { compatible = "nxp,pnx-i2c"; reg = <0x400A8000 0x100>; - interrupts = <0x32 0>; + interrupts = <50 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; + clocks = <&clk LPC32XX_CLK_I2C2>; }; mpwm: mpwm@400E8000 { @@ -231,6 +280,23 @@ compatible = "simple-bus"; ranges = <0x20000000 0x20000000 0x30000000>; + /* System Control Block */ + scb { + compatible = "simple-bus"; + ranges = <0x0 0x040004000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + clk: clock-controller@0 { + compatible = "nxp,lpc3220-clk"; + reg = <0x00 0x114>; + #clock-cells = <1>; + + clocks = <&xtal_32k>, <&xtal>; + clock-names = "xtal_32k", "xtal"; + }; + }; + /* * MIC Interrupt controller includes: * MIC @40008000 @@ -247,28 +313,29 @@ uart1: serial@40014000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart2: serial@40018000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; - interrupts = <25 0>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart7: serial@4001c000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x4001c000 0x1000>; - interrupts = <24 0>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; rtc: rtc@40024000 { compatible = "nxp,lpc3220-rtc"; reg = <0x40024000 0x1000>; - interrupts = <0x34 0>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_RTC>; }; gpio: gpio@40028000 { @@ -281,26 +348,33 @@ timer4: timer@4002C000 { compatible = "nxp,lpc3220-timer"; reg = <0x4002C000 0x1000>; - interrupts = <0x3 0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER4>; + clock-names = "timerclk"; status = "disabled"; }; timer5: timer@40030000 { compatible = "nxp,lpc3220-timer"; reg = <0x40030000 0x1000>; - interrupts = <0x4 0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER5>; + clock-names = "timerclk"; status = "disabled"; }; watchdog: watchdog@4003C000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; + clocks = <&clk LPC32XX_CLK_WDOG>; }; timer0: timer@40044000 { compatible = "nxp,lpc3220-timer"; reg = <0x40044000 0x1000>; - interrupts = <0x10 0>; + clocks = <&clk LPC32XX_CLK_TIMER0>; + clock-names = "timerclk"; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; }; /* @@ -313,53 +387,63 @@ adc: adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; - interrupts = <0x27 0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; tsc: tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; - interrupts = <0x27 0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; timer1: timer@4004C000 { compatible = "nxp,lpc3220-timer"; reg = <0x4004C000 0x1000>; - interrupts = <0x11 0>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER1>; + clock-names = "timerclk"; }; key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; - interrupts = <54 0>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; timer2: timer@40058000 { compatible = "nxp,lpc3220-timer"; reg = <0x40058000 0x1000>; - interrupts = <0x12 0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER2>; + clock-names = "timerclk"; status = "disabled"; }; pwm1: pwm@4005C000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; + clocks = <&clk LPC32XX_CLK_PWM1>; status = "disabled"; }; pwm2: pwm@4005C004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; + clocks = <&clk LPC32XX_CLK_PWM2>; status = "disabled"; }; timer3: timer@40060000 { compatible = "nxp,lpc3220-timer"; reg = <0x40060000 0x1000>; - interrupts = <0x13 0>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER3>; + clock-names = "timerclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 2c84ca236473..726372d3adc0 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -457,6 +457,18 @@ reg = <0x0 0x2d24000 0x0 0x4000>; }; + ptp_clock@2d10e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x0 0x2d10e00 0x0 0xb0>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xaaaaaaab>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <499999999>; + }; + enet0: ethernet@2d10000 { compatible = "fsl,etsec2"; device_type = "network"; @@ -560,5 +572,49 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; }; + + pcie@3400000 { + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + fsl,pcie-scfg = <&scfg 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie@3500000 { + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ + 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + fsl,pcie-scfg = <&scfg 1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h new file mode 100644 index 000000000000..e24ebc8d928e --- /dev/null +++ b/arch/arm/boot/dts/mt2701-pinfunc.h @@ -0,0 +1,735 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Biao Huang <biao.huang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DTS_MT2701_PINFUNC_H +#define __DTS_MT2701_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1) +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2) + +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1) +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2) + +#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1) + +#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1) + +#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1) + +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1) +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5) + +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7) + +#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1) +#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4) +#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7) + +#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1) +#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2) +#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4) +#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7) + +#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1) +#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2) +#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3) +#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4) +#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7) + +#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1) + +#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1) + +#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1) + +#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1) + +#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1) +#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2) +#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5) +#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7) + +#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1) +#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2) +#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7) + +#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1) +#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2) +#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4) +#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5) +#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6) +#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7) + +#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1) +#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2) +#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5) +#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6) +#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7) + +#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1) +#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2) +#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3) +#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4) +#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5) +#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6) +#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7) + +#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1) +#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2) +#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3) +#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4) +#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5) +#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6) +#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7) + +#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1) +#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3) +#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4) +#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5) +#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7) +#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10) + +#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1) +#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3) +#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4) +#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5) +#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7) +#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10) + +#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1) +#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3) +#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4) +#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7) +#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10) + +#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1) +#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3) +#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4) +#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7) + +#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1) +#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2) +#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3) +#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4) +#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5) +#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6) +#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7) + +#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1) +#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2) +#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3) +#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4) +#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6) +#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7) + +#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1) +#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3) +#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4) +#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6) +#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7) + +#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1) +#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2) +#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3) +#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4) +#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5) +#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7) +#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14) + +#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1) +#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2) +#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3) +#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4) +#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5) +#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6) +#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7) + +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7) + +#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1) +#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3) +#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5) +#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6) +#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7) + +#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7) + +#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7) + +#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1) +#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2) +#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3) +#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4) + +#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1) +#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2) +#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3) +#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4) + +#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1) +#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2) +#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4) + +#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1) +#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2) +#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4) + +#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1) +#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2) + +#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1) +#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2) + +#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1) +#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2) + +#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1) + +#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1) +#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2) + +#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1) +#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2) + +#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1) +#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2) +#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3) +#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6) +#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7) + +#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1) +#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3) +#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4) +#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5) +#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7) + +#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1) +#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3) +#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4) +#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7) + +#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1) +#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2) +#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3) +#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4) +#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5) +#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7) + +#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3) +#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7) + +#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1) + +#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1) + +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7) + +#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7) + +#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1) +#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3) +#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6) +#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7) + +#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1) + +#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1) + +#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1) + +#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1) + +#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1) +#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2) +#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5) + +#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1) +#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2) + +#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1) +#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2) + +#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1) +#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2) + +#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1) +#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2) +#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7) + +#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1) +#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7) + +#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0) +#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1) + +#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0) +#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1) + +#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0) +#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1) + +#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0) +#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1) + +#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0) +#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1) + +#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0) +#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1) + +#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0) +#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1) + +#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0) +#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1) + +#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0) +#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1) + +#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0) +#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1) + +#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1) +#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3) +#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4) + +#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1) +#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2) +#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3) +#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4) + +#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1) +#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2) +#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3) +#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4) + +#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1) +#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3) +#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4) + +#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7) + +#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7) + +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7) + +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7) + +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7) + +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7) + +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1) +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4) + +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1) +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4) + +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1) +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4) + +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1) +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4) + +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1) +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4) + +#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1) +#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4) + +#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1) +#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4) + +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1) +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4) + +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1) +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4) + +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1) +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4) + +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5) + +#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1) +#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4) +#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5) + +#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1) +#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4) +#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5) + +#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1) +#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4) +#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5) + +#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1) +#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4) +#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5) + +#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7) + +#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1) +#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3) +#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4) +#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7) + +#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7) + +#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7) + +#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1) + +#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0) +#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1) +#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2) +#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5) +#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7) +#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9) + +#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0) +#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1) +#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2) +#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5) +#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7) +#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9) + +#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0) +#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1) +#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2) +#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5) +#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7) + +#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0) +#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1) +#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2) +#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3) +#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5) +#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7) + +#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0) +#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1) +#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2) +#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3) +#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5) +#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7) + +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11) + +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11) + +#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7) + +#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0) +#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1) +#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2) + +#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0) +#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1) +#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2) + +#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0) +#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1) +#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2) + +#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0) +#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1) + +#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0) +#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1) + +#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0) +#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1) +#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2) +#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3) +#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4) +#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7) + +#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0) +#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1) +#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2) +#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3) +#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4) +#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7) + +#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0) +#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1) + +#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0) +#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1) + +#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0) + +#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0) +#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1) + +#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0) +#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1) + +#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9) + +#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9) +#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14) + +#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9) +#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14) + +#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9) +#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14) + +#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9) +#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14) + +#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9) +#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14) + +#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9) +#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14) + +#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9) + +#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9) + +#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9) + +#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9) + +#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9) + +#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0) +#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1) +#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7) + +#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0) +#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1) + +#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0) +#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1) +#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6) + +#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0) +#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1) +#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6) + +#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0) +#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1) +#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6) + +#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0) +#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1) +#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6) + +#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0) +#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1) + +#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0) +#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1) + +#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0) +#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1) + +#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0) +#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1) + +#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0) +#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1) + +#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0) +#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1) + +#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0) +#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1) + +#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0) +#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1) +#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6) + +#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0) +#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1) +#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6) + +#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0) +#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1) + +#endif /* __DTS_MT2701_PINFUNC_H */ diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 3766904b60f3..83437683aa60 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -23,6 +23,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu@0 { device_type = "cpu"; @@ -46,6 +47,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + system_clk: dummy13m { compatible = "fixed-clock"; clock-frequency = <13000000>; diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts new file mode 100644 index 000000000000..a9ee2d64c6f7 --- /dev/null +++ b/arch/arm/boot/dts/mt7623-evb.dts @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt7623.dtsi" + +/ { + model = "MediaTek MT7623 evaluation board"; + compatible = "mediatek,mt7623-evb", "mediatek,mt7623"; + + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0 0x80000000 0 0x40000000>; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi new file mode 100644 index 000000000000..fd2b614ae6f3 --- /dev/null +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -0,0 +1,147 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton64.dtsi" + +/ { + compatible = "mediatek,mt7623"; + interrupt-parent = <&sysirq>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "mediatek,mt6589-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt7623-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt7623-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x80>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt7623-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200100 0 0x1c>; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10211000 0 0x1000>, + <0 0x10212000 0 0x1000>, + <0 0x10214000 0 0x2000>, + <0 0x10216000 0 0x2000>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi new file mode 100644 index 000000000000..e211a3c47a76 --- /dev/null +++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi @@ -0,0 +1,72 @@ +/* + * Device Tree common file for gpio-fan on Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpio-fan,speed-map = + <0 3 + 1500 2 + 3250 1 + 5000 0>; + }; +}; + +&pinctrl { + pmx_fan_low: pmx-fan-low { + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi new file mode 100644 index 000000000000..68d75e79a360 --- /dev/null +++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi @@ -0,0 +1,105 @@ +/* + * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_switch>; + pinctrl-names = "default"; + + power-on-switch { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + }; + + power-auto-switch { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>; + pinctrl-names = "default"; + + blue-power-led { + label = "linkstation:blue:power"; + default-state = "keep"; + }; + + red-alarm-led { + label = "linkstation:red:alarm"; + }; + + amber-info-led { + label = "linkstation:amber:info"; + }; + }; +}; + +&pinctrl { + pmx_power_switch: pmx-power-switch { + marvell,function = "gpio"; + }; + + pmx_led_power: pmx-leds { + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 8ba465d57635..4602866792be 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -384,8 +384,11 @@ /* Chip select 0 */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* NAND I/O window, 4 bytes */ - interrupts = <20>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "ham1"; nand-bus-width = <16>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e5f7f5c92c1a..a8127bc31fd9 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -261,10 +261,14 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; gpmc,device-width = <1>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 86850bb311eb..b1b8ebf90c1c 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -204,7 +204,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index ac188657a95d..76056ba92ced 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -154,12 +154,16 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "hynix,h8kds0un0mer-4em"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 5e2d6433d939..ab9fb8f49ff3 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -492,7 +492,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 3caf062f882c..41f5d386f21f 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -18,6 +18,10 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; + chosen { + stdout-path = &uart3; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "igep2"; @@ -95,8 +99,12 @@ &gpmc { nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index d90f12c39307..d6f839cab649 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -210,8 +210,8 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>, - <5 0 0x2c000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */ + <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */ ethernet@gpmc { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 640f06603966..e94d9427450c 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -33,9 +33,28 @@ default-state = "off"; }; }; + + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ + }; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ @@ -47,6 +66,20 @@ }; &omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_core2_pins>; + + hsusb2_core2_pins: pinmux_hsusb2_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + leds_core2_pins: pinmux_leds_core2_pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ @@ -54,7 +87,19 @@ }; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; + +&gpmc { + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 540163025dd3..2f353dadfa40 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -97,12 +97,16 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>, - <1 0 0x08000000 0x01000000>; + ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */ + <1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 93f8dfe20f13..eff816e0bc0a 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -362,7 +362,11 @@ <7 0 0x15000000 0x01000000>; nand@0,0 { - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; /* no elm on omap3 */ diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index f2e213931e09..5c67429a4da7 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -53,3 +53,7 @@ }; }; }; + +&modem { + compatible = "nokia,n9-modem"; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 74d8f7eb5563..b3c26a96a726 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -65,50 +65,51 @@ camera_lens_cover { label = "Camera Lens Cover"; gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ - wakeup-source; + linux,input-type = <EV_SW>; + linux,code = <SW_CAMERA_LENS_COVER>; + linux,can-disable; }; camera_focus { label = "Camera Focus"; gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ - linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ - wakeup-source; + linux,code = <KEY_CAMERA_FOCUS>; + linux,can-disable; }; camera_capture { label = "Camera Capture"; gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ - linux,code = <0xd4>; /* KEY_CAMERA */ - wakeup-source; + linux,code = <KEY_CAMERA>; + linux,can-disable; }; lock_button { label = "Lock Button"; gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ - linux,code = <0x98>; /* KEY_SCREENLOCK */ - wakeup-source; + linux,code = <KEY_SCREENLOCK>; + linux,can-disable; }; keypad_slide { label = "Keypad Slide"; gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ - wakeup-source; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; }; proximity_sensor { label = "Proximity Sensor"; gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ + linux,input-type = <EV_SW>; + linux,code = <SW_FRONT_PROXIMITY>; + linux,can-disable; }; }; - isp1704: isp1704 { - compatible = "nxp,isp1704"; + isp1707: isp1707 { + compatible = "nxp,isp1707"; nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; usb-phy = <&usb2_phy>; }; @@ -522,6 +523,21 @@ amstaos,cover-comp-gain = <16>; }; + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + led-max-microamp = <50000>; + }; + indicator { + led-max-microamp = <17500>; + }; + }; + lp5523: lp5523@32 { compatible = "national,lp5523"; reg = <0x32>; @@ -618,7 +634,7 @@ ti,termination-current = <100>; ti,resistor-sense = <68>; - ti,usb-charger-detection = <&isp1704>; + ti,usb-charger-detection = <&isp1707>; }; }; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index a2c2b8d8dd2c..858a25048102 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -31,6 +31,14 @@ startup-delay-us = <150>; enable-active-high; }; + + vwlan_fixed: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VWLAN"; + gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ + enable-active-high; + regulator-boot-off; + }; }; &omap3_pmx_core { @@ -44,6 +52,55 @@ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ >; }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */ + OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */ + >; + }; + + ssi_pins: pinmux_ssi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + >; + }; + + ssi_pins_idle: pinmux_ssi_pins_idle { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */ + >; + }; + + modem_pins1: pinmux_modem_core1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ + >; + }; +}; + +&omap3_pmx_core2 { + modem_pins2: pinmux_modem_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */ + >; + }; }; &i2c1 { @@ -191,3 +248,39 @@ }; }; }; + +&ssi_port1 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&ssi_pins>; + pinctrl-1 = <&ssi_pins_idle>; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + + modem: hsi-client { + pinctrl-names = "default"; + pinctrl-0 = <&modem_pins1 &modem_pins2>; + + hsi-channel-ids = <0>, <1>, <2>, <3>; + hsi-channel-names = "mcsaab-control", + "speech-control", + "speech-data", + "mcsaab-data"; + hsi-speed-kbps = <96000>; + hsi-mode = "frame"; + hsi-flow = "synchronized"; + hsi-arb-mode = "round-robin"; + + interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */ + + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */ + <&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */ + <&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */ + gpio-names = "cmt_apeslpx", + "cmt_rst_rq", + "cmt_en"; + }; +}; + +&ssi_port2 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 0885b34d5d7d..7f219a9dc5be 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -17,6 +17,17 @@ compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; +&omap3_pmx_core { + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ + OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ + >; + }; +}; + &i2c2 { smia_1: camera@10 { compatible = "nokia,smia"; @@ -53,3 +64,25 @@ }; }; }; + +&mcspi4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + + wlcore: wlcore@0 { + compatible = "ti,wl1271"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + reg = <0>; + spi-max-frequency = <48000000>; + clock-xtal; + ref-clock-frequency = <38400000>; + interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */ + vwlan-supply = <&vwlan_fixed>; + }; +}; + +&modem { + compatible = "nokia,n950-modem"; +}; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index a29ad16cc9bb..de256fa8da48 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -226,8 +226,12 @@ ranges = <0 0 0x00000000 0x20000000>; nand@0,0 { + compatible = "ti,omap2-nand"; linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 0>; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 13e9d1f987af..bcf39d606b65 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -546,7 +546,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts new file mode 100644 index 000000000000..78a1184cb312 --- /dev/null +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "LG Optimus Black"; + compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ + >; + }; + + dp3t_sel_pins: pinmux_dp3t_sel_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4) /* gpio_161 */ + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* gpio_162 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; + + lp8720_en_pin: pinmux_lp8720_en_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4) /* gpio_37 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0) /* sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0) /* sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0) /* sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + + usb_otg_hs_pins: pinmux_usb_otg_hs_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7 */ + >; + }; +}; + +&omap3_pmx_wkup { + pinctrl-names = "default"; + + mmc1_cd_pin: pinmux_mmc1_cd_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4) /* gpio_10 */ + >; + }; +}; + +&gpio2 { + ti,no-reset-on-init; +}; + +&gpio5 { + ti,no-reset-on-init; +}; + +&gpio6 { + ti,no-reset-on-init; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &dp3t_sel_pins>; + + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; + + lp8720@7d { + pinctrl-names = "default"; + pinctrl-0 = <&lp8720_en_pin>; + + compatible = "ti,lp8720"; + reg = <0x7d>; + + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */ + + lp8720_ldo1: ldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>; + + vmmc-supply = <&lp8720_ldo1>; + cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */ + bus-width = <4>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + vmmc-supply = <&vmmc2>; + ti,non-removable; + bus-width = <8>; +}; + +&mmc3 { + status = "disabled"; +}; + +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_hs_pins>; + + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl_keypad { + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP) + MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN) + MATRIX_KEY(0x02, 0x00, KEY_SELECT) + >; +}; + +/* + * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3. + * When not powered, these sensors cause the I2C3 clock to stay low at all times, + * making it impossible to reach other devices on I2C3. + */ + +&vaux2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&vdac { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index ae5dbbd9d569..644d3c8ea66a 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -275,10 +275,14 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index d1ffabb7c74f..b41d07e8e765 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -723,6 +723,8 @@ gpmc,num-waitpins = <4>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; }; usb_otg_hs: usb_otg_hs@480ab000 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 16b0cdfbee9c..a0dc8d854142 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -103,10 +103,14 @@ }; nand@1,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,mt29f1g08abb"; #address-cells = <1>; #size-cells = <1>; - reg = <1 0 4>; /* CS1, offset 0, IO size 4 */ ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 4f6b2d5b1902..387dc31822fe 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -54,6 +54,12 @@ #size-cells = <0>; }; }; + + bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap34xx-bandgap"; + #thermal-sensor-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 86253de5a97a..f19c87bd6bf3 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -86,6 +86,12 @@ #size-cells = <0>; }; }; + + bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap36xx-bandgap"; + #thermal-sensor-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 888412c63f97..902657d6713b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -130,6 +130,16 @@ }; }; +&gpio8 { + /* TI trees use GPIO instead of msecure, see also muxing */ + p234 { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio8_234/msecure"; + }; +}; + &omap5_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -213,6 +223,13 @@ >; }; + /* TI trees use GPIO mode; msecure mode does not work reliably? */ + palmas_msecure_pins: palmas_msecure_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ + >; + }; + usbhost_pins: pinmux_usbhost_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ @@ -278,6 +295,12 @@ &usbhost_wkup_pins >; + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */ + >; + }; + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ @@ -345,6 +368,8 @@ interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; extcon_usb3: palmas_usb { compatible = "ti,palmas-usb-vid"; @@ -358,6 +383,14 @@ #clock-cells = <0>; }; + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + ti,backup-battery-chargeable; + ti,backup-battery-charge-high-current; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index ca3c17fde5a0..38805ebbe2ba 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -852,18 +852,6 @@ hw-caps-temp-alert; }; - omap_control_usb2phy: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usb3phy: control-phy@4a002370 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002370 0x4>; - reg-names = "power"; - }; - usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; @@ -885,7 +873,6 @@ phys = <&usb2_phy>, <&usb3_phy>; phy-names = "usb2-phy", "usb3-phy"; dr_mode = "peripheral"; - tx-fifo-resize; }; }; @@ -899,7 +886,7 @@ usb2_phy: usb2phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; - ctrl-module = <&omap_control_usb2phy>; + syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; @@ -911,7 +898,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb3phy>; + syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy_cm_clk32k>, <&sys_clkin>, <&usb_otg_ss_refclk960m>; @@ -967,14 +954,6 @@ #thermal-sensor-cells = <1>; }; - omap_control_sata: control-phy@4a002374 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002374 0x4>; - reg-names = "power"; - clocks = <&sys_clkin>; - clock-names = "sysclk"; - }; - /* OCP2SCP3 */ ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp"; @@ -989,7 +968,7 @@ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_sata>; + syscon-phy-power = <&scm_conf 0x374>; clocks = <&sys_clkin>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; #phy-cells = <0>; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts new file mode 100644 index 000000000000..1cf644bfd7ea --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -0,0 +1,87 @@ +/* + * Device Tree file for Buffalo Linkstation LS-GL + * (also known as Buffalo Linkstation Pro/Live) + * + * Copyright (C) 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c + * Copyright (C) Ronen Shitrit <rshitrit@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "orion5x-linkstation.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Buffalo Linkstation Pro/Live"; + compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; +}; + +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec912b4bf..0eead400f427 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com> + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -44,9 +45,10 @@ /dts-v1/; +#include "orion5x-linkstation.dtsi" +#include "mvebu-linkstation-gpio-simple.dtsi" +#include "mvebu-linkstation-fan.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "orion5x-mv88f5182.dtsi" / { model = "Buffalo Linkstation LS-WTGL"; @@ -57,217 +59,93 @@ reg = <0x00000000 0x4000000>; }; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, - <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, - <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; - - internal-regs { - pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - pmx_led_power: pmx-leds { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - - pmx_led_alarm: pmx-leds { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_led_info: pmx-leds { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - - pmx_power_hdd: pmx-power-hdd { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp12"; - marvell,function = "sata0"; - }; - - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp13"; - marvell,function = "sata1"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp8", "mpp10"; - marvell,function = "gpio"; - }; - }; - }; - }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; + power-on-switch { gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - button@2 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; + power-auto-switch { gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; }; gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_power &pmx_led_alarm - &pmx_led_info>; - pinctrl-names = "default"; - - led@1 { - label = "lswtgl:blue:power"; + blue-power-led { gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; }; - led@2 { - label = "lswtgl:red:alarm"; + red-alarm-led { gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; }; - led@3 { - label = "lswtgl:amber:info"; + amber-info-led { gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; }; gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW &gpio0 17 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +}; - restart_poweroff { - compatible = "restart-poweroff"; +&pinctrl { + pmx_led_power: pmx-leds { + marvell,pins = "mpp0"; + marvell,function = "gpio"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>; - pinctrl-names = "default"; + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; - hdd_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - }; + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; }; -}; -&mdio { - status = "okay"; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; - ethphy: ethernet-phy { - reg = <8>; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp8", "mpp10"; + marvell,function = "gpio"; }; -}; -ð { - status = "okay"; + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; - ethernet-port@0 { - phy-handle = <ðphy>; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp14"; + marvell,function = "gpio"; }; -}; -&ehci0 { - status = "okay"; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; }; -&i2c { - status = "okay"; - - rtc { - compatible = "ricoh,rs5c372a"; - reg = <0x32>; - }; +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; }; -&wdt { - status = "disabled"; +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; &sata { - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - status = "okay"; nr-ports = <2>; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi new file mode 100644 index 000000000000..ed456ab35fd8 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -0,0 +1,180 @@ +/* + * Device Tree common file for orion5x based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "orion5x-mv88f5182.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,function = "gpio"; + }; +}; + +&devbus_bootcs { + status = "okay"; + devbus,keep-config; + + flash@0 { + compatible = "jedec-flash"; + reg = <0 0x40000>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + header@0 { + reg = <0 0x30000>; + read-only; + }; + + uboot@30000 { + reg = <0x30000 0xF000>; + read-only; + }; + + uboot_env@3F000 { + reg = <0x3F000 0x1000>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c { + status = "okay"; + + rtc { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&wdt { + status = "disabled"; +}; + +&sata { + status = "okay"; + nr-ports = <1>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index 7d253bb6265a..a00d7ce7802b 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -25,6 +25,37 @@ reg = <0x80000000 0x4000000>; }; + regulators { + backlight_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "backlight_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 4 0>; + enable-active-high; + regulator-boot-on; + }; + + lcd_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lcd_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 0 0>; + enable-active-high; + regulator-boot-on; + }; + + sd_reg: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "sd_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 5 0>; + enable-active-high; + }; + }; + ahb { mac: ethernet@31060000 { phy-mode = "rmii"; @@ -140,6 +171,7 @@ cd-gpios = <&gpio 3 1 0>; cd-inverted; bus-width = <4>; + vmmc-supply = <&sd_reg>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 7f68a1ee7073..210192c38df3 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -13,6 +13,7 @@ interrupts = <25>; #dma-channels = <32>; #dma-cells = <2>; + #dma-requests = <75>; status = "okay"; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index cf6998a0804d..fec47bcd8292 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -12,6 +12,7 @@ interrupts = <25>; #dma-channels = <32>; #dma-cells = <2>; + #dma-requests = <100>; status = "okay"; }; @@ -30,7 +31,7 @@ reg = <0x43100000 90>; interrupts = <45>; clocks = <&clks CLK_NAND>; - dmas = <&pdma 97>; + dmas = <&pdma 97 3>; dma-names = "data"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts new file mode 100644 index 000000000000..c535b3f0e5cf --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -0,0 +1,276 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +/ { + model = "Asus Nexus7(flo)"; + compatible = "asus,nexus7-flo", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + volume_up { + label = "Volume Up"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEUP>; + }; + volume_down { + label = "Volume Down"; + gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + soc { + rpm@108000 { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + /* msm otg HSUSB_VDDCX */ + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + }; + + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + /* mipi_dsi.1-dsi1_pll_vdda */ + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* msm_otg-HSUSB_3p3 */ + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + /* msm_otg-HSUSB_1p8 */ + l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* msm_sdcc.1-sdc_vdd */ + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + /* mipi_dsi.1-dsi1_avdd */ + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + /* pwm_power for backlight */ + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + + /* camera, qdsp6 */ + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + lvs1 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16280000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; + + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 21095dad7741..35f1d46edded 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -37,6 +37,18 @@ bias-disable; }; }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; }; rpm@108000 { @@ -103,6 +115,11 @@ regulator-max-microvolt = <1900000>; bias-pull-down; }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + }; }; @@ -195,6 +212,16 @@ }; }; + pci@1b500000 { + status = "ok"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&v3p3_fixed>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index fd4d49ef9ef2..2eeb0904eaa7 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -9,6 +9,11 @@ aliases { serial0 = &gsbi7_serial; serial1 = &gsbi6_serial; + i2c0 = &gsbi1_i2c; + i2c1 = &gsbi2_i2c; + i2c2 = &gsbi3_i2c; + i2c3 = &gsbi4_i2c; + spi0 = &gsbi5_spi; }; chosen { @@ -157,7 +162,16 @@ gsbi3: gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; - i2c3: i2c@16280000 { + i2c@16280000 { + status = "okay"; + }; + }; + + gsbi@16300000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + /* CAM I2C MIPI-CSI connector */ + i2c@16380000 { status = "okay"; }; }; @@ -178,6 +192,16 @@ }; }; + gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + spi4: spi@1a280000 { + status = "okay"; + num-cs = <1>; + cs-gpios = <&tlmm_pinmux 53 0>; + }; + }; + gsbi@16500000 { status = "ok"; qcom,mode = <GSBI_PROT_UART_W_FC>; diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi new file mode 100644 index 000000000000..b57c59d5bc00 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -0,0 +1,208 @@ + +&tlmm_pinmux { + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + + ps_hold: ps_hold { + mux { + pins = "gpio78"; + function = "ps_hold"; + }; + }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c1_pins_sleep: i2c1_pins_sleep { + mux { + pins = "gpio20", "gpio21"; + function = "gpio"; + }; + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c2_pins: i2c2 { + mux { + pins = "gpio24", "gpio25"; + function = "gsbi2"; + }; + + pinconf { + pins = "gpio24", "gpio25"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c2_pins_sleep: i2c2_pins_sleep { + mux { + pins = "gpio24", "gpio25"; + function = "gpio"; + }; + + pinconf { + pins = "gpio24", "gpio25"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + }; + + pinconf { + pins = "gpio8", "gpio9"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c3_pins_sleep: i2c3_pins_sleep { + mux { + pins = "gpio8", "gpio9"; + function = "gpio"; + }; + pinconf { + pins = "gpio8", "gpio9"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c4_pins: i2c4 { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + }; + + pinconf { + pins = "gpio12", "gpio13"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c4_pins_sleep: i2c4_pins_sleep { + mux { + pins = "gpio12", "gpio13"; + function = "gpio"; + }; + pinconf { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + spi5_default: spi5_default { + pinmux { + pins = "gpio51", "gpio52", "gpio54"; + function = "gsbi5"; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio53"; + }; + + pinconf { + pins = "gpio51", "gpio52", "gpio54"; + drive-strength = <16>; + bias-disable; + }; + + pinconf_cs { + pins = "gpio53"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5_sleep { + pinmux { + function = "gpio"; + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + }; + + pinconf { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + i2c6_pins: i2c6 { + mux { + pins = "gpio16", "gpio17"; + function = "gsbi6"; + }; + + pinconf { + pins = "gpio16", "gpio17"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c6_pins_sleep: i2c6_pins_sleep { + mux { + pins = "gpio16", "gpio17"; + function = "gpio"; + }; + pinconf { + pins = "gpio16", "gpio17"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + gsbi6_uart_2pins: gsbi6_uart_2pins { + mux { + pins = "gpio14", "gpio15"; + function = "gsbi6"; + }; + }; + + gsbi6_uart_4pins: gsbi6_uart_4pins { + mux { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; + }; + }; + + gsbi7_uart_2pins: gsbi7_uart_2pins { + mux { + pins = "gpio82", "gpio83"; + function = "gsbi7"; + }; + }; + + gsbi7_uart_4pins: gsbi7_uart_4pins { + mux { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index ed521e85e208..65d0e8d98259 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -142,62 +142,6 @@ pinctrl-names = "default"; pinctrl-0 = <&ps_hold>; - - sdc4_gpios: sdc4-gpios { - pios { - pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; - function = "sdc4"; - }; - }; - - ps_hold: ps_hold { - mux { - pins = "gpio78"; - function = "ps_hold"; - }; - }; - - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - - i2c3_pins: i2c3 { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi3"; - }; - }; - - gsbi6_uart_2pins: gsbi6_uart_2pins { - mux { - pins = "gpio14", "gpio15"; - function = "gsbi6"; - }; - }; - - gsbi6_uart_4pins: gsbi6_uart_4pins { - mux { - pins = "gpio14", "gpio15", "gpio16", "gpio17"; - function = "gsbi6"; - }; - }; - - gsbi7_uart_2pins: gsbi7_uart_2pins { - mux { - pins = "gpio82", "gpio83"; - function = "gsbi7"; - }; - }; - - gsbi7_uart_4pins: gsbi7_uart_4pins { - mux { - pins = "gpio82", "gpio83", "gpio84", "gpio85"; - function = "gsbi7"; - }; - }; }; sfpb_wrapper_mutex: syscon@1200000 { @@ -281,10 +225,10 @@ syscon-tcsr = <&tcsr>; - i2c1: i2c@12460000 { + gsbi1_i2c: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins &i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; interrupts = <0 194 IRQ_TYPE_NONE>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; @@ -292,6 +236,7 @@ #address-cells = <1>; #size-cells = <0>; }; + }; gsbi2: gsbi@12480000 { @@ -307,9 +252,11 @@ syscon-tcsr = <&tcsr>; - i2c2: i2c@124a0000 { + gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; + pinctrl-0 = <&i2c2_pins &i2c2_pins_sleep>; + pinctrl-names = "default", "sleep"; interrupts = <0 196 IRQ_TYPE_NONE>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; @@ -328,15 +275,40 @@ #address-cells = <1>; #size-cells = <1>; ranges; - i2c3: i2c@16280000 { + gsbi3_i2c: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins &i2c3_pins_sleep>; + pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi4: gsbi@16300000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x03>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi4_i2c: i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c4_pins &i2c4_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16380000 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI4_QUP_CLK>, + <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; }; }; @@ -360,6 +332,19 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi5_spi: spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + pinctrl-0 = <&spi5_default &spi5_sleep>; + pinctrl-names = "default", "sleep"; + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; gsbi6: gsbi@16500000 { @@ -382,6 +367,17 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c6_pins &i2c6_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI6_QUP_CLK>, + <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + }; }; gsbi7: gsbi@16600000 { @@ -521,6 +517,11 @@ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; + rpmcc: clock-controller { + compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; + #clock-cells = <1>; + }; + regulators { compatible = "qcom,rpm-pm8921-regulators"; @@ -721,7 +722,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -823,3 +824,4 @@ }; }; }; +#include "qcom-apq8064-pins.dtsi" diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 08214cbae16d..a33a09f6821e 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -91,6 +91,20 @@ interrupts = <1 7 0xf04>; }; + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index fa698635eea0..2601a907947b 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -62,6 +62,18 @@ }; clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + sleep_clk: sleep_clk { compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index e5f7f33aa467..cd214030b84a 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -42,6 +42,26 @@ interrupts = <1 9 0x304>; }; + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -167,7 +187,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 51a40d84145c..da05e28a81a7 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -251,7 +251,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index dfdafdcb8aae..ef5330578431 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include "skeleton.dtsi" @@ -14,10 +14,50 @@ #size-cells = <1>; ranges; + mpss@08000000 { + reg = <0x08000000 0x5100000>; + no-map; + }; + + mba@00d100000 { + reg = <0x0d100000 0x100000>; + no-map; + }; + + reserved@0d200000 { + reg = <0x0d200000 0xa00000>; + no-map; + }; + + adsp@0dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; + }; + + venus@0f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + smem_region: smem@fa00000 { reg = <0xfa00000 0x200000>; no-map; }; + + tz@0fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; + }; + + efs@0fd600000 { + reg = <0x0fd60000 0x1a0000>; + no-map; + }; + + unused@0ff00000 { + reg = <0x0ff00000 0x10100000>; + no-map; + }; }; cpus { @@ -91,6 +131,20 @@ interrupts = <1 7 0xf04>; }; + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, @@ -109,6 +163,73 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupt-parent = <&intc>; + interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-2 = <&apcs 8 9>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + adsp_smsm: adsp@2 { + reg = <2>; + interrupts = <0 157 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -339,6 +460,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; }; spmi_bus: spmi@fc4cf000 { @@ -356,6 +479,16 @@ interrupt-controller; #interrupt-cells = <4>; }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; }; smd { diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 9f357f68713c..0512f645922e 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -11,7 +11,7 @@ pm8841_mpps: mpps@a000 { compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x400>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, @@ -22,7 +22,7 @@ temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index ca53a5947437..d95edb6f6265 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -12,15 +12,15 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000 0x100>, - <0x6100 0x100>; + reg = <0x6000>, + <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; pwrkey@800 { compatible = "qcom,pm8941-pwrkey"; - reg = <0x800 0x100>; + reg = <0x800>; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; @@ -28,7 +28,7 @@ charger@1000 { compatible = "qcom,pm8941-charger"; - reg = <0x1000 0x700>; + reg = <0x1000>; interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, @@ -49,7 +49,7 @@ pm8941_gpios: gpios@c000 { compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; - reg = <0xc000 0x2400>; + reg = <0xc000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, @@ -92,7 +92,7 @@ pm8941_mpps: mpps@a000 { compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x800>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, @@ -107,7 +107,7 @@ pm8941_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; io-channels = <&pm8941_vadc VADC_DIE_TEMP>; io-channel-names = "thermal"; @@ -116,7 +116,7 @@ pm8941_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; @@ -141,7 +141,7 @@ pm8941_iadc: iadc@3600 { compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; - reg = <0x3600 0x100>; + reg = <0x3600>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; @@ -161,7 +161,7 @@ pm8941_wled: wled@d800 { compatible = "qcom,pm8941-wled"; - reg = <0xd800 0x100>; + reg = <0xd800>; label = "backlight"; status = "disabled"; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 4657d7fb5bce..89e46ebef1bc 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -10,6 +10,7 @@ */ #include <dt-bindings/clock/r7s72100-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -152,12 +153,12 @@ scif0: serial@e8007000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007000 64>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>, - <0 191 IRQ_TYPE_LEVEL_HIGH>, - <0 192 IRQ_TYPE_LEVEL_HIGH>, - <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -165,12 +166,12 @@ scif1: serial@e8007800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007800 64>; - interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>, - <0 195 IRQ_TYPE_LEVEL_HIGH>, - <0 196 IRQ_TYPE_LEVEL_HIGH>, - <0 193 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -178,12 +179,12 @@ scif2: serial@e8008000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8008000 64>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>, - <0 200 IRQ_TYPE_LEVEL_HIGH>, - <0 197 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -191,12 +192,12 @@ scif3: serial@e8008800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8008800 64>; - interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>, - <0 203 IRQ_TYPE_LEVEL_HIGH>, - <0 204 IRQ_TYPE_LEVEL_HIGH>, - <0 201 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -204,12 +205,12 @@ scif4: serial@e8009000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8009000 64>; - interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>, - <0 207 IRQ_TYPE_LEVEL_HIGH>, - <0 208 IRQ_TYPE_LEVEL_HIGH>, - <0 205 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -217,12 +218,12 @@ scif5: serial@e8009800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8009800 64>; - interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>, - <0 211 IRQ_TYPE_LEVEL_HIGH>, - <0 212 IRQ_TYPE_LEVEL_HIGH>, - <0 209 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -230,12 +231,12 @@ scif6: serial@e800a000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe800a000 64>; - interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>, - <0 215 IRQ_TYPE_LEVEL_HIGH>, - <0 216 IRQ_TYPE_LEVEL_HIGH>, - <0 213 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -243,12 +244,12 @@ scif7: serial@e800a800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe800a800 64>; - interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>, - <0 219 IRQ_TYPE_LEVEL_HIGH>, - <0 220 IRQ_TYPE_LEVEL_HIGH>, - <0 217 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -256,9 +257,9 @@ spi0: spi@e800c800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800c800 0x24>; - interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>, - <0 239 IRQ_TYPE_LEVEL_HIGH>, - <0 240 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI0>; power-domains = <&cpg_clocks>; @@ -271,9 +272,9 @@ spi1: spi@e800d000 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800d000 0x24>; - interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>, - <0 242 IRQ_TYPE_LEVEL_HIGH>, - <0 243 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI1>; power-domains = <&cpg_clocks>; @@ -286,9 +287,9 @@ spi2: spi@e800d800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800d800 0x24>; - interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>, - <0 245 IRQ_TYPE_LEVEL_HIGH>, - <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI2>; power-domains = <&cpg_clocks>; @@ -301,9 +302,9 @@ spi3: spi@e800e000 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800e000 0x24>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>, - <0 248 IRQ_TYPE_LEVEL_HIGH>, - <0 249 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI3>; power-domains = <&cpg_clocks>; @@ -316,9 +317,9 @@ spi4: spi@e800e800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800e800 0x24>; - interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>, - <0 251 IRQ_TYPE_LEVEL_HIGH>, - <0 252 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI4>; power-domains = <&cpg_clocks>; @@ -342,14 +343,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee000 0x44>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, - <0 158 IRQ_TYPE_EDGE_RISING>, - <0 159 IRQ_TYPE_EDGE_RISING>, - <0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 164 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C0>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -361,14 +362,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee400 0x44>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 166 IRQ_TYPE_EDGE_RISING>, - <0 167 IRQ_TYPE_EDGE_RISING>, - <0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 169 IRQ_TYPE_LEVEL_HIGH>, - <0 170 IRQ_TYPE_LEVEL_HIGH>, - <0 171 IRQ_TYPE_LEVEL_HIGH>, - <0 172 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C1>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -380,14 +381,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee800 0x44>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>, - <0 174 IRQ_TYPE_EDGE_RISING>, - <0 175 IRQ_TYPE_EDGE_RISING>, - <0 176 IRQ_TYPE_LEVEL_HIGH>, - <0 177 IRQ_TYPE_LEVEL_HIGH>, - <0 178 IRQ_TYPE_LEVEL_HIGH>, - <0 179 IRQ_TYPE_LEVEL_HIGH>, - <0 180 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C2>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -399,14 +400,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfeec00 0x44>; - interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>, - <0 182 IRQ_TYPE_EDGE_RISING>, - <0 183 IRQ_TYPE_EDGE_RISING>, - <0 184 IRQ_TYPE_LEVEL_HIGH>, - <0 185 IRQ_TYPE_LEVEL_HIGH>, - <0 186 IRQ_TYPE_LEVEL_HIGH>, - <0 187 IRQ_TYPE_LEVEL_HIGH>, - <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C3>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -416,7 +417,7 @@ mtu2: timer@fcff0000 { compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; reg = <0xfcff0000 0x400>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tgi0a"; clocks = <&mstp3_clks R7S72100_CLK_MTU2>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index cb4f7b2798fe..6583a1dfca1f 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -29,6 +29,7 @@ reg = <0>; clock-frequency = <1500000000>; power-domains = <&pd_a2sl>; + next-level-cache = <&L2_CA15>; }; }; @@ -39,10 +40,26 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + clocks = <&cpg_clocks R8A73A4_CLK_Z>; + power-domains = <&pd_a3sm>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@1 { + compatible = "cache"; + clocks = <&cpg_clocks R8A73A4_CLK_Z2>; + power-domains = <&pd_a3km>; + cache-unified; + cache-level = <2>; }; dbsc1: memory-controller@e6790000 { @@ -69,27 +86,27 @@ dma0: dma-controller@e6700020 { compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH - 0 215 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -106,7 +123,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; - interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC5>; power-domains = <&pd_a3sp>; @@ -116,7 +133,7 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -131,38 +148,38 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 4 IRQ_TYPE_LEVEL_HIGH>, - <0 5 IRQ_TYPE_LEVEL_HIGH>, - <0 6 IRQ_TYPE_LEVEL_HIGH>, - <0 7 IRQ_TYPE_LEVEL_HIGH>, - <0 8 IRQ_TYPE_LEVEL_HIGH>, - <0 9 IRQ_TYPE_LEVEL_HIGH>, - <0 10 IRQ_TYPE_LEVEL_HIGH>, - <0 11 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>, - <0 18 IRQ_TYPE_LEVEL_HIGH>, - <0 19 IRQ_TYPE_LEVEL_HIGH>, - <0 20 IRQ_TYPE_LEVEL_HIGH>, - <0 21 IRQ_TYPE_LEVEL_HIGH>, - <0 22 IRQ_TYPE_LEVEL_HIGH>, - <0 23 IRQ_TYPE_LEVEL_HIGH>, - <0 24 IRQ_TYPE_LEVEL_HIGH>, - <0 25 IRQ_TYPE_LEVEL_HIGH>, - <0 26 IRQ_TYPE_LEVEL_HIGH>, - <0 27 IRQ_TYPE_LEVEL_HIGH>, - <0 28 IRQ_TYPE_LEVEL_HIGH>, - <0 29 IRQ_TYPE_LEVEL_HIGH>, - <0 30 IRQ_TYPE_LEVEL_HIGH>, - <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -172,32 +189,32 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>, - <0 35 IRQ_TYPE_LEVEL_HIGH>, - <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>, - <0 39 IRQ_TYPE_LEVEL_HIGH>, - <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>, - <0 43 IRQ_TYPE_LEVEL_HIGH>, - <0 44 IRQ_TYPE_LEVEL_HIGH>, - <0 45 IRQ_TYPE_LEVEL_HIGH>, - <0 46 IRQ_TYPE_LEVEL_HIGH>, - <0 47 IRQ_TYPE_LEVEL_HIGH>, - <0 48 IRQ_TYPE_LEVEL_HIGH>, - <0 49 IRQ_TYPE_LEVEL_HIGH>, - <0 50 IRQ_TYPE_LEVEL_HIGH>, - <0 51 IRQ_TYPE_LEVEL_HIGH>, - <0 52 IRQ_TYPE_LEVEL_HIGH>, - <0 53 IRQ_TYPE_LEVEL_HIGH>, - <0 54 IRQ_TYPE_LEVEL_HIGH>, - <0 55 IRQ_TYPE_LEVEL_HIGH>, - <0 56 IRQ_TYPE_LEVEL_HIGH>, - <0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -237,7 +254,7 @@ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; power-domains = <&pd_c5>; }; @@ -247,7 +264,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC0>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -258,7 +275,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -269,7 +286,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; - interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC2>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -280,7 +297,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; - interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC3>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -291,7 +308,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; - interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC4>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -302,7 +319,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC6>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -313,7 +330,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; - interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC7>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -324,7 +341,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A73A4_CLK_IIC8>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -333,9 +350,9 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -343,9 +360,9 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -353,9 +370,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c40000 0 0x100>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -363,9 +380,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c50000 0 0x100>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -373,9 +390,9 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -383,9 +400,9 @@ scifb3: serial@e6cf0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6cf0000 0 0x100>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_c4>; status = "disabled"; }; @@ -393,7 +410,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -403,7 +420,7 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; - interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -413,7 +430,7 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -423,7 +440,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -433,7 +450,7 @@ mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -449,7 +466,7 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; bsc: bus@fec10000 { diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 6ef954766eef..995fbda74b7a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/r8a7740-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -41,7 +42,7 @@ L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; - interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_a3sm>; arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; @@ -58,7 +59,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; }; ptm { @@ -69,7 +70,7 @@ cmt1: timer@e6138000 { compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48"; reg = <0xe6138000 0x170>; - interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -89,14 +90,14 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -111,14 +112,14 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -133,14 +134,14 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -155,14 +156,14 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -171,7 +172,7 @@ compatible = "renesas,gether-r8a7740"; reg = <0xe9a00000 0x800>, <0xe9a01800 0x800>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_GETHER>; power-domains = <&pd_a4s>; phy-mode = "mii"; @@ -185,10 +186,10 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; - interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_IIC0>; power-domains = <&pd_a4r>; status = "disabled"; @@ -199,10 +200,10 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; - interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH - 0 71 IRQ_TYPE_LEVEL_HIGH - 0 72 IRQ_TYPE_LEVEL_HIGH - 0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -211,9 +212,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -221,9 +222,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -231,9 +232,9 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -241,9 +242,9 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -251,9 +252,9 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -261,9 +262,9 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -271,9 +272,9 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -281,9 +282,9 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -291,9 +292,9 @@ scifb: serial@e6c30000 { compatible = "renesas,scifb-r8a7740", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -329,8 +330,8 @@ mmcif0: mmc@e6bd0000 { compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH - 0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_MMC>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -339,9 +340,9 @@ sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; - interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH - 0 118 IRQ_TYPE_LEVEL_HIGH - 0 119 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -352,9 +353,9 @@ sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; - interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH - 0 122 IRQ_TYPE_LEVEL_HIGH - 0 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI1>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -365,9 +366,9 @@ sdhi2: sd@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH - 0 126 IRQ_TYPE_LEVEL_HIGH - 0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7740_CLK_SDHI2>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -379,7 +380,7 @@ #sound-dai-cells = <1>; compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; reg = <0xfe1f0000 0x400>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 0x4>; clocks = <&mstp3_clks R8A7740_CLK_FSI>; power-domains = <&pd_a4mp>; status = "disabled"; @@ -388,9 +389,9 @@ tmu0: timer@fff80000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff80000 0x2c>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>, - <0 200 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU0>; clock-names = "fck"; power-domains = <&pd_a4r>; @@ -403,9 +404,9 @@ tmu1: timer@fff90000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff90000 0x2c>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>, - <0 171 IRQ_TYPE_LEVEL_HIGH>, - <0 172 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU1>; clock-names = "fck"; power-domains = <&pd_a4r>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index a52b359e2ae2..21e3b9dda2da 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -126,11 +126,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + mmc_pins: mmc { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; @@ -217,3 +225,8 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 791aafd310a5..f83a348fc07a 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -17,6 +17,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/r8a7778-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -51,7 +52,7 @@ ether: ethernet@fde00000 { compatible = "renesas,ether-r8a7778"; reg = <0xfde00000 0x400>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7778_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -79,17 +80,17 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -100,7 +101,7 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -111,7 +112,7 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -122,7 +123,7 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -133,7 +134,7 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 27>; @@ -151,7 +152,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -162,7 +163,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -173,7 +174,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -184,7 +185,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; - interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -193,9 +194,9 @@ tmu0: timer@ffd80000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd80000 0x30>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -208,9 +209,9 @@ tmu1: timer@ffd81000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd81000 0x30>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -223,9 +224,9 @@ tmu2: timer@ffd82000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd82000 0x30>; - interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -285,72 +286,84 @@ }; rcar_sound,ssi { - ssi3: ssi@3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi@3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; }; }; scif0: serial@ffe40000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe40000 0x100>; - interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF0>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif1: serial@ffe41000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe41000 0x100>; - interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF1>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif2: serial@ffe42000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe42000 0x100>; - interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF2>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif3: serial@ffe43000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe43000 0x100>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF3>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif4: serial@ffe44000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe44000 0x100>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF4>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif5: serial@ffe45000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe45000 0x100>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF5>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -358,7 +371,7 @@ mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; - interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_MMC>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -367,7 +380,7 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; - interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -376,7 +389,7 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -385,7 +398,7 @@ sdhi2: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -394,7 +407,7 @@ hspi0: spi@fffc7000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -405,7 +418,7 @@ hspi1: spi@fffc8000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -416,7 +429,7 @@ hspi2: spi@fffc6000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -437,6 +450,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@ffc80000 { compatible = "renesas,r8a7778-cpg-clocks"; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index fe396c8d58db..e111d35d02ae 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -165,6 +165,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { du0 { renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; @@ -176,6 +179,11 @@ }; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk_b"; + renesas,function = "scif_clk"; + }; + ethernet_pins: ethernet { intc { renesas,groups = "intc_irq1_b"; @@ -222,6 +230,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 6afa909865b5..a0cc08e6295b 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -74,7 +74,7 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -85,7 +85,7 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -96,7 +96,7 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -107,7 +107,7 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -118,7 +118,7 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -129,7 +129,7 @@ gpio5: gpio@ffc45000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; - interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -140,7 +140,7 @@ gpio6: gpio@ffc46000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; - interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 9>; @@ -159,10 +159,10 @@ <0xfe780044 4>, <0xfe780064 4>, <0xfe780000 4>; - interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; @@ -171,7 +171,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; - interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -182,7 +182,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; - interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -193,7 +193,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -204,68 +204,80 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; - interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; power-domains = <&cpg_clocks>; status = "disabled"; }; scif0: serial@ffe40000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe40000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF0>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif1: serial@ffe41000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe41000 0x100>; - interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF1>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif2: serial@ffe42000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe42000 0x100>; - interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF2>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif3: serial@ffe43000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe43000 0x100>; - interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF3>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif4: serial@ffe44000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe44000 0x100>; - interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF4>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif5: serial@ffe45000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe45000 0x100>; - interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF5>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -283,9 +295,9 @@ tmu0: timer@ffd80000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd80000 0x30>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -298,9 +310,9 @@ tmu1: timer@ffd81000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd81000 0x30>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -313,9 +325,9 @@ tmu2: timer@ffd82000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd82000 0x30>; - interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -328,7 +340,7 @@ sata: sata@fc600000 { compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&cpg_clocks>; }; @@ -336,7 +348,7 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -345,7 +357,7 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -354,7 +366,7 @@ sdhi2: sd@ffe4e000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -363,7 +375,7 @@ sdhi3: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -372,7 +384,7 @@ hspi0: spi@fffc7000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -383,7 +395,7 @@ hspi1: spi@fffc8000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -394,7 +406,7 @@ hspi2: spi@fffc6000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -405,7 +417,7 @@ du: display@fff80000 { compatible = "renesas,du-r8a7779"; reg = <0 0xfff80000 0 0x40000>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -441,6 +453,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: clocks@ffc80000 { compatible = "renesas,r8a7779-cpg-clocks"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 052dcee4790d..aa6ca92a9485 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -3,6 +3,7 @@ * * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. + * Copyright (C) 2015-2016 Renesas Electronics Corporation * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -49,6 +50,7 @@ aliases { serial0 = &scif0; serial1 = &scifa1; + i2c8 = "i2cexio"; }; chosen { @@ -252,6 +254,23 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + /* + * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. + * We use the I2C demuxer, so the desired IP core can be selected at runtime + * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). + * Note: For testing the I2C slave feature, it is convenient to connect this + * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and + * instantiate the slave device at runtime according to the documentation. + * You can then communicate with the slave via IIC3. + */ + i2cexio: i2c@8 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&iic0>, <&i2c0>; + i2c-bus-name = "i2c-exio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -291,6 +310,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; renesas,function = "du"; @@ -301,6 +323,11 @@ renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -342,6 +369,11 @@ renesas,function = "msiof1"; }; + i2c0_pins: i2c0 { + renesas,groups = "i2c0"; + renesas,function = "i2c0"; + }; + iic0_pins: iic0 { renesas,groups = "iic0"; renesas,function = "iic0"; @@ -485,6 +517,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &msiof1 { pinctrl-0 = <&msiof1_pins>; pinctrl-names = "default"; @@ -524,10 +561,14 @@ cpu0-supply = <&vdd_dvfs>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "i2c-exio"; +}; + &iic0 { - status = "okay"; pinctrl-0 = <&iic0_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-exio"; }; &iic1 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7dfd393bfc7e..38b706399a6b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -52,6 +52,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7790_CLK_Z>; clock-latency = <300000>; /* 300 us */ + next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -67,6 +68,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu2: cpu@2 { @@ -74,6 +76,7 @@ compatible = "arm,cortex-a15"; reg = <2>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu3: cpu@3 { @@ -81,6 +84,7 @@ compatible = "arm,cortex-a15"; reg = <3>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu4: cpu@4 { @@ -88,6 +92,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu5: cpu@5 { @@ -95,6 +100,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu6: cpu@6 { @@ -102,6 +108,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu7: cpu@7 { @@ -109,9 +116,41 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -121,13 +160,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -140,7 +179,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 30>; @@ -153,7 +192,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 30>; @@ -166,7 +205,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -179,7 +218,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -192,7 +231,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -202,27 +241,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -235,14 +277,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -257,10 +299,10 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7790_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -268,22 +310,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -299,22 +341,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -330,20 +372,20 @@ audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH - 0 320 IRQ_TYPE_LEVEL_HIGH - 0 321 IRQ_TYPE_LEVEL_HIGH - 0 322 IRQ_TYPE_LEVEL_HIGH - 0 323 IRQ_TYPE_LEVEL_HIGH - 0 324 IRQ_TYPE_LEVEL_HIGH - 0 325 IRQ_TYPE_LEVEL_HIGH - 0 326 IRQ_TYPE_LEVEL_HIGH - 0 327 IRQ_TYPE_LEVEL_HIGH - 0 328 IRQ_TYPE_LEVEL_HIGH - 0 329 IRQ_TYPE_LEVEL_HIGH - 0 330 IRQ_TYPE_LEVEL_HIGH - 0 331 IRQ_TYPE_LEVEL_HIGH - 0 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -359,20 +401,20 @@ audma1: dma-controller@ec720000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH - 0 333 IRQ_TYPE_LEVEL_HIGH - 0 334 IRQ_TYPE_LEVEL_HIGH - 0 335 IRQ_TYPE_LEVEL_HIGH - 0 336 IRQ_TYPE_LEVEL_HIGH - 0 337 IRQ_TYPE_LEVEL_HIGH - 0 338 IRQ_TYPE_LEVEL_HIGH - 0 339 IRQ_TYPE_LEVEL_HIGH - 0 340 IRQ_TYPE_LEVEL_HIGH - 0 341 IRQ_TYPE_LEVEL_HIGH - 0 342 IRQ_TYPE_LEVEL_HIGH - 0 343 IRQ_TYPE_LEVEL_HIGH - 0 344 IRQ_TYPE_LEVEL_HIGH - 0 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -388,8 +430,8 @@ usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH - 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; power-domains = <&cpg_clocks>; @@ -400,8 +442,8 @@ usb_dmac1: dma-controller@e65b0000 { compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH - 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; power-domains = <&cpg_clocks>; @@ -414,7 +456,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -426,7 +468,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -438,7 +480,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -450,7 +492,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -462,7 +504,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; @@ -475,7 +517,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; @@ -488,7 +530,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x425>; - interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; dmas = <&dmac0 0x69>, <&dmac0 0x6a>; dma-names = "tx", "rx"; @@ -501,7 +543,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; @@ -512,7 +554,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -525,7 +567,7 @@ mmcif1: mmc@ee220000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; dma-names = "tx", "rx"; @@ -543,7 +585,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x328>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; @@ -554,7 +596,7 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x328>; - interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; @@ -565,7 +607,7 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; @@ -576,7 +618,7 @@ sdhi3: sd@ee160000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; @@ -585,11 +627,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -597,11 +640,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -609,11 +653,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -621,11 +666,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -633,11 +679,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -645,11 +692,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -657,11 +705,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7790", "renesas,scif"; + compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -669,11 +719,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7790", "renesas,scif"; + compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -681,11 +733,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7790", "renesas,hscif"; + compatible = "renesas,hscif-r8a7790", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -693,11 +747,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7790", "renesas,hscif"; + compatible = "renesas,hscif-r8a7790", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -707,7 +763,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7790"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -717,9 +773,10 @@ }; avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7790"; + compatible = "renesas,etheravb-r8a7790", + "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -730,7 +787,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7790"; reg = <0 0xee300000 0 0x2000>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -739,16 +796,16 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7790"; reg = <0 0xee500000 0 0x2000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA1>; power-domains = <&cpg_clocks>; status = "disabled"; }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7790"; + compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; @@ -783,7 +840,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -792,7 +849,7 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -801,7 +858,7 @@ vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -810,7 +867,7 @@ vin3: video@e6ef3000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef3000 0 0x1000>; - interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -819,7 +876,7 @@ vsp1@fe920000 { compatible = "renesas,vsp1"; reg = <0 0xfe920000 0 0x8000>; - interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; power-domains = <&cpg_clocks>; @@ -832,7 +889,7 @@ vsp1@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; - interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; power-domains = <&cpg_clocks>; @@ -846,7 +903,7 @@ vsp1@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; - interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; power-domains = <&cpg_clocks>; @@ -860,7 +917,7 @@ vsp1@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; power-domains = <&cpg_clocks>; @@ -877,9 +934,9 @@ <0 0xfeb90000 0 0x1c>, <0 0xfeb94000 0 0x1c>; reg-names = "du", "lvds.0", "lvds.1"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>, - <0 269 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_DU0>, <&mstp7_clks R8A7790_CLK_DU1>, <&mstp7_clks R8A7790_CLK_DU2>, @@ -913,7 +970,7 @@ can0: can@e6e80000 { compatible = "renesas,can-r8a7790"; reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -924,7 +981,7 @@ can1: can@e6e88000 { compatible = "renesas,can-r8a7790"; reg = <0 0xe6e88000 0 0x1000>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -935,7 +992,7 @@ jpu: jpeg-codec@fe980000 { compatible = "renesas,jpu-r8a7790"; reg = <0 0xfe980000 0 0x10300>; - interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_JPU>; power-domains = <&cpg_clocks>; }; @@ -986,6 +1043,15 @@ clock-output-names = "audio_clk_c"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal_clk { compatible = "fixed-clock"; @@ -1401,7 +1467,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -1415,7 +1481,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e20000 0 0x0064>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; @@ -1428,7 +1494,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e10000 0 0x0064>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; @@ -1441,7 +1507,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e00000 0 0x0064>; - interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; @@ -1454,7 +1520,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6c90000 0 0x0064>; - interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; dma-names = "tx", "rx"; @@ -1467,7 +1533,7 @@ xhci: usb@ee000000 { compatible = "renesas,xhci-r8a7790"; reg = <0 0xee000000 0 0xc00>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; power-domains = <&cpg_clocks>; phys = <&usb2 1>; @@ -1476,11 +1542,11 @@ }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1491,9 +1557,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1511,11 +1577,11 @@ }; pci1: pci@ee0b0000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0b0000 0 0xc00>, <0 0xee0a0000 0 0x1100>; - interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1526,19 +1592,19 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; }; pci2: pci@ee0d0000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; bus-range = <2 2>; @@ -1547,9 +1613,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1567,7 +1633,7 @@ }; pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7790"; + compatible = "renesas,pcie-r8a7790", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; @@ -1580,12 +1646,12 @@ /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; - interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, - <0 117 IRQ_TYPE_LEVEL_HIGH>, - <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&cpg_clocks>; @@ -1664,52 +1730,52 @@ rcar_sound,src { src0: src@0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; src1: src@1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; src2: src@2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; src3: src@3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; src4: src@4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; src5: src@5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; src6: src@6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; src7: src@7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; src8: src@8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; src9: src@9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; }; @@ -1717,52 +1783,52 @@ rcar_sound,ssi { ssi0: ssi@0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi@1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi2: ssi@2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi3: ssi@3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi4: ssi@4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi5: ssi@5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi6: ssi@6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi7: ssi@7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi8: ssi@8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi9: ssi@9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; }; @@ -1772,8 +1838,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1781,7 +1847,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1789,8 +1855,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1798,7 +1864,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1806,8 +1872,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1815,7 +1881,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 45256f3cc835..0ad71b81d3a2 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -320,6 +320,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; @@ -340,6 +343,11 @@ renesas,function = "scif1"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -440,6 +448,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6713b1ea732b..6c08314427d6 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -8,6 +8,17 @@ * kind, whether express or implied. */ +/* + * SSI-AK4642 + * + * JP3: 2-1: AK4642 + * 2-3: ADV7511 + * + * This command is required before playback/capture: + * + * amixer set "LINEOUT Mixer DACL" on + */ + /dts-v1/; #include "r8a7791.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -78,6 +89,53 @@ states = <3300000 1 1800000 0>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x16_clk: x16-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x14_clk: x14-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&soundcodec>; + simple-audio-card,frame-master = <&soundcodec>; + + simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + soundcodec: simple-audio-card,codec { + sound-dai = <&ak4642>; + clocks = <&x14_clk>; + }; + }; }; &extal_clk { @@ -85,11 +143,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -139,6 +205,21 @@ renesas,groups = "can0_data"; renesas,function = "can0"; }; + + du_pins: du { + renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + renesas,function = "du"; + }; + + ssi_pins: sound { + renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + renesas,function = "ssi"; + }; + + audio_clk_pins: audio_clk { + renesas,groups = "audio_clk_a"; + renesas,function = "audio_clk"; + }; }; &scif0 { @@ -148,6 +229,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -229,6 +315,12 @@ status = "okay"; clock-frequency = <400000>; + ak4642: codec@12 { + compatible = "asahi-kasei,ak4642"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; @@ -241,6 +333,38 @@ }; }; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; &sata0 { @@ -283,7 +407,6 @@ pinctrl-names = "default"; status = "okay"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; }; &usbphy { @@ -304,3 +427,44 @@ status = "okay"; }; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&mstp7_clks R8A7791_CLK_DU0>, + <&mstp7_clks R8A7791_CLK_DU1>, + <&mstp7_clks R8A7791_CLK_LVDS0>, + <&x3_clk>, <&x16_clk>; + clock-names = "du.0", "du.1", "lvds.0", + "dclkin.0", "dclkin.1"; + + ports { + port@1 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; +}; + +&rcar_sound { + pinctrl-0 = <&ssi_pins &audio_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0>; + capture = <&ssi1>; + }; + }; +}; + +&ssi1 { + shared-pin; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 2a369ddcb6fd..6439f0569fe2 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -51,6 +51,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7791_CLK_Z>; clock-latency = <300000>; /* 300 us */ + next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -66,9 +67,35 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + next-level-cache = <&L2_CA15>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -78,13 +105,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -97,7 +124,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -110,7 +137,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -123,7 +150,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -136,7 +163,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -149,7 +176,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -162,7 +189,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 32>; @@ -175,7 +202,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055800 0 0x50>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 224 26>; @@ -185,27 +212,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7791", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -218,14 +248,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -240,16 +270,16 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7791_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -257,22 +287,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -288,22 +318,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -319,20 +349,20 @@ audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH - 0 320 IRQ_TYPE_LEVEL_HIGH - 0 321 IRQ_TYPE_LEVEL_HIGH - 0 322 IRQ_TYPE_LEVEL_HIGH - 0 323 IRQ_TYPE_LEVEL_HIGH - 0 324 IRQ_TYPE_LEVEL_HIGH - 0 325 IRQ_TYPE_LEVEL_HIGH - 0 326 IRQ_TYPE_LEVEL_HIGH - 0 327 IRQ_TYPE_LEVEL_HIGH - 0 328 IRQ_TYPE_LEVEL_HIGH - 0 329 IRQ_TYPE_LEVEL_HIGH - 0 330 IRQ_TYPE_LEVEL_HIGH - 0 331 IRQ_TYPE_LEVEL_HIGH - 0 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -348,20 +378,20 @@ audma1: dma-controller@ec720000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH - 0 333 IRQ_TYPE_LEVEL_HIGH - 0 334 IRQ_TYPE_LEVEL_HIGH - 0 335 IRQ_TYPE_LEVEL_HIGH - 0 336 IRQ_TYPE_LEVEL_HIGH - 0 337 IRQ_TYPE_LEVEL_HIGH - 0 338 IRQ_TYPE_LEVEL_HIGH - 0 339 IRQ_TYPE_LEVEL_HIGH - 0 340 IRQ_TYPE_LEVEL_HIGH - 0 341 IRQ_TYPE_LEVEL_HIGH - 0 342 IRQ_TYPE_LEVEL_HIGH - 0 343 IRQ_TYPE_LEVEL_HIGH - 0 344 IRQ_TYPE_LEVEL_HIGH - 0 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -377,8 +407,8 @@ usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH - 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; power-domains = <&cpg_clocks>; @@ -389,8 +419,8 @@ usb_dmac1: dma-controller@e65b0000 { compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH - 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; power-domains = <&cpg_clocks>; @@ -404,7 +434,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -416,7 +446,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -428,7 +458,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -440,7 +470,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -452,7 +482,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6520000 0 0x40>; - interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -465,7 +495,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6528000 0 0x40>; - interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -478,7 +508,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; @@ -491,7 +521,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; @@ -504,7 +534,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; @@ -520,7 +550,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -533,7 +563,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x328>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; @@ -544,7 +574,7 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; @@ -555,7 +585,7 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; @@ -564,11 +594,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -576,11 +607,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -588,11 +620,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -600,11 +633,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -612,11 +646,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -624,11 +659,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -636,11 +672,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -648,11 +685,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -660,11 +698,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -672,11 +711,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -684,11 +725,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -696,11 +739,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -708,11 +753,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -720,11 +767,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -732,11 +781,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -744,11 +795,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -756,11 +809,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -768,11 +823,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -782,7 +839,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7791"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -795,7 +852,7 @@ compatible = "renesas,etheravb-r8a7791", "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -806,7 +863,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7791"; reg = <0 0xee300000 0 0x2000>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -815,16 +872,16 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7791"; reg = <0 0xee500000 0 0x2000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA1>; power-domains = <&cpg_clocks>; status = "disabled"; }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7791"; + compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; @@ -859,7 +916,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -868,7 +925,7 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -877,7 +934,7 @@ vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -886,7 +943,7 @@ vsp1@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; - interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; power-domains = <&cpg_clocks>; @@ -900,7 +957,7 @@ vsp1@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; - interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; power-domains = <&cpg_clocks>; @@ -914,7 +971,7 @@ vsp1@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; power-domains = <&cpg_clocks>; @@ -930,8 +987,8 @@ reg = <0 0xfeb00000 0 0x40000>, <0 0xfeb90000 0 0x1c>; reg-names = "du", "lvds.0"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_DU0>, <&mstp7_clks R8A7791_CLK_DU1>, <&mstp7_clks R8A7791_CLK_LVDS0>; @@ -958,7 +1015,7 @@ can0: can@e6e80000 { compatible = "renesas,can-r8a7791"; reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -969,7 +1026,7 @@ can1: can@e6e88000 { compatible = "renesas,can-r8a7791"; reg = <0 0xe6e88000 0 0x1000>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -980,7 +1037,7 @@ jpu: jpeg-codec@fe980000 { compatible = "renesas,jpu-r8a7791"; reg = <0 0xfe980000 0 0x10300>; - interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_JPU>; power-domains = <&cpg_clocks>; }; @@ -1031,6 +1088,15 @@ status = "disabled"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal_clk { compatible = "fixed-clock"; @@ -1432,7 +1498,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -1446,7 +1512,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e20000 0 0x0064>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; @@ -1459,7 +1525,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e10000 0 0x0064>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; @@ -1472,7 +1538,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e00000 0 0x0064>; - interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; @@ -1485,7 +1551,7 @@ xhci: usb@ee000000 { compatible = "renesas,xhci-r8a7791"; reg = <0 0xee000000 0 0xc00>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; power-domains = <&cpg_clocks>; phys = <&usb2 1>; @@ -1494,11 +1560,11 @@ }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7791"; + compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1509,9 +1575,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1529,11 +1595,11 @@ }; pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7791"; + compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1544,9 +1610,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1564,7 +1630,7 @@ }; pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7791"; + compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; @@ -1577,12 +1643,12 @@ /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; - interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, - <0 117 IRQ_TYPE_LEVEL_HIGH>, - <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&cpg_clocks>; @@ -1592,8 +1658,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1601,7 +1667,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1609,8 +1675,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1618,7 +1684,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1626,8 +1692,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1635,7 +1701,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1643,8 +1709,8 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1721,52 +1787,52 @@ rcar_sound,src { src0: src@0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; src1: src@1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; src2: src@2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; src3: src@3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; src4: src@4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; src5: src@5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; src6: src@6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; src7: src@7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; src8: src@8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; src9: src@9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; }; @@ -1774,52 +1840,52 @@ rcar_sound,ssi { ssi0: ssi@0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi@1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi2: ssi@2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi3: ssi@3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi4: ssi@4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi5: ssi@5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi6: ssi@6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi7: ssi@7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi8: ssi@8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi9: ssi@9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index baa59fe84298..87e89ec9dd47 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -8,6 +8,34 @@ * kind, whether express or implied. */ +/* + * SSI-AK4643 + * + * SW1: 1: AK4643 + * 2: CN22 + * 3: ADV7511 + * + * This command is required when Playback/Capture + * + * amixer set "LINEOUT Mixer DACL" on + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + /dts-v1/; #include "r8a7793.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -31,6 +59,176 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + gpio-keys { + compatible = "gpio-keys"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; + }; + key-a { + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "SW30"; + wakeup-source; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "SW31"; + wakeup-source; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "SW32"; + wakeup-source; + debounce-interval = <20>; + }; + key-d { + gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_D>; + label = "SW33"; + wakeup-source; + debounce-interval = <20>; + }; + key-e { + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_E>; + label = "SW34"; + wakeup-source; + debounce-interval = <20>; + }; + key-f { + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F>; + label = "SW35"; + wakeup-source; + debounce-interval = <20>; + }; + key-g { + gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_G>; + label = "SW36"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + label = "LED6"; + }; + led7 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + label = "LED7"; + }; + led8 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + label = "LED8"; + }; + }; + + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + + rsnd_ak4643: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + clocks = <&audio_clock>; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&mstp7_clks R8A7793_CLK_DU0>, + <&mstp7_clks R8A7793_CLK_DU1>, + <&mstp7_clks R8A7793_CLK_LVDS0>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "lvds.0", + "dclkin.0", "dclkin.1"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + lvds_connector: endpoint { + }; + }; + }; }; &extal_clk { @@ -38,6 +236,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; + + du_pins: du { + renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + renesas,function = "du"; + }; + scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; @@ -48,6 +259,11 @@ renesas,function = "scif1"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -62,6 +278,16 @@ renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + sound_pins: sound { + renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + renesas,function = "ssi"; + }; + + sound_clk_pins: sound_clk { + renesas,groups = "audio_clk_a"; + renesas,function = "audio_clk"; + }; }; ðer { @@ -98,6 +324,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -136,3 +367,76 @@ }; }; }; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <100000>; + + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + eeprom@50 { + compatible = "renesas,r1ex24002", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + status = "okay"; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src2 &dvc0>; + capture = <&ssi1 &src3 &dvc1>; + }; + }; +}; + +&ssi1 { + shared-pin; +}; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index aef9e69d6c26..b48215945241 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -19,6 +19,15 @@ #size-cells = <2>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; spi0 = &qspi; }; @@ -42,9 +51,35 @@ < 937500 1000000>, < 750000 1000000>, < 375000 1000000>; + next-level-cache = <&L2_CA15>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -54,13 +89,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -73,7 +108,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -86,7 +121,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -99,7 +134,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -112,7 +147,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -125,7 +160,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -138,7 +173,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 32>; @@ -151,7 +186,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055800 0 0x50>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 224 26>; @@ -161,27 +196,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7793", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7793_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -194,14 +232,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -216,44 +254,39 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7793_CLK_IRQC>; power-domains = <&cpg_clocks>; }; - pfc: pfc@e6060000 { - compatible = "renesas,pfc-r8a7793"; - reg = <0 0xe6060000 0 0x250>; - }; - dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -269,22 +302,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -297,12 +330,190 @@ dma-channels = <15>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + /* The memory map in the User's Manual maps the cores to bus numbers */ + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C0>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C1>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C2>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C3>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C4>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C5>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_IIC0>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_IIC1>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7793"; + reg = <0 0xe6060000 0 0x250>; + }; + scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -310,11 +521,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -322,11 +534,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -334,11 +547,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -346,11 +560,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -358,11 +573,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -370,11 +586,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -382,11 +599,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -394,11 +612,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -406,11 +625,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -418,11 +639,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -430,11 +653,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -442,11 +667,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -454,11 +681,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -466,11 +695,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -478,11 +709,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -490,11 +723,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -502,11 +737,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -516,7 +753,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7793"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7793_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -528,7 +765,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7793", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -544,8 +781,8 @@ reg = <0 0xfeb00000 0 0x40000>, <0 0xfeb90000 0 0x1c>; reg-names = "du", "lvds.0"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_DU0>, <&mstp7_clks R8A7793_CLK_DU1>, <&mstp7_clks R8A7793_CLK_LVDS0>; @@ -583,6 +820,38 @@ clock-output-names = "extal"; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency clocks by + * default. Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_a"; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_b"; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_c"; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7793-cpg-clocks", @@ -671,6 +940,14 @@ clock-mult = <1>; clock-output-names = "p"; }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; rclk_clk: rclk_clk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; @@ -770,10 +1047,11 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&extal_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>; #clock-cells = <1>; - clock-indices = <R8A7793_CLK_THERMAL>; - clock-output-names = "thermal"; + clock-indices = <R8A7793_CLK_AUDIO_DMAC0 R8A7793_CLK_AUDIO_DMAC1 + R8A7793_CLK_THERMAL>; + clock-output-names = "audmac0", "audmac1", "thermal"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7793-mstp-clocks", @@ -820,19 +1098,61 @@ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cpg_clocks R8A7793_CLK_QSPI>; + <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>, + <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6 R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4 R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2 R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0 - R8A7793_CLK_QSPI_MOD + R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5 + R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4 + R8A7793_CLK_I2C3 R8A7793_CLK_I2C2 + R8A7793_CLK_I2C1 R8A7793_CLK_I2C0 >; clock-output-names = "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "qspi_mod"; + "qspi_mod", "i2c5", "i2c6", "i2c4", + "i2c3", "i2c2", "i2c1", "i2c0"; + }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>; + + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_SSI_ALL + R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5 + R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0 + R8A7793_CLK_SCU_ALL + R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0 + R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0 + R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5 + R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0 + >; + clock-output-names = + "ssi-all", + "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", + "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", + "scu-all", + "scu-dvc1", "scu-dvc0", + "scu-ctu1-mix1", "scu-ctu0-mix0", + "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", + "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -849,8 +1169,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -858,7 +1178,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -866,8 +1186,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -875,7 +1195,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -883,8 +1203,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -892,7 +1212,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -900,9 +1220,166 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7793", "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>, + <&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>, + <&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>, + <&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>, + <&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>, + <&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>, + <&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>, + <&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>, + <&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>, + <&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>, + <&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>, + <&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg_clocks>; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,src { + src0: src@0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 2394e4883786..ca9bc4fff287 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -103,6 +103,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; renesas,function = "du"; @@ -113,6 +116,11 @@ renesas,function = "scif2"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -138,6 +146,13 @@ status = "okay"; }; +&pfc { + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -197,3 +212,47 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "system"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "user"; + reg = <0x00080000 0x03f80000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 5153e3af25d9..66f077a3ca41 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -64,6 +64,61 @@ states = <3300000 1 1800000 0>; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -71,11 +126,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif2_pins: serial2 { renesas,groups = "scif2_data"; renesas,function = "scif2"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -129,6 +192,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -164,6 +232,38 @@ }; }; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio5>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; &mmcif0 { @@ -258,3 +358,25 @@ &usbphy { status = "okay"; }; + +&du { + status = "okay"; + + clocks = <&mstp7_clks R8A7794_CLK_DU0>, + <&mstp7_clks R8A7794_CLK_DU0>, + <&x2_clk>, <&x3_clk>; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 6c78f1fae90f..eacb2b291361 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -40,6 +40,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + next-level-cache = <&L2_CA7>; }; cpu1: cpu@1 { @@ -47,9 +48,16 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + next-level-cache = <&L2_CA7>; }; }; + L2_CA7: cache-controller@1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -59,13 +67,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -78,7 +86,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -91,7 +99,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -104,7 +112,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -117,7 +125,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -130,7 +138,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 28>; @@ -143,7 +151,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 26>; @@ -156,8 +164,8 @@ cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7794_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -170,14 +178,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -189,10 +197,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { @@ -200,16 +208,16 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7794_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -222,22 +230,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -253,22 +261,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -282,11 +290,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -294,11 +303,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -306,11 +316,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -318,11 +329,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -330,11 +342,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -342,11 +355,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -354,11 +368,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -366,11 +381,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -378,11 +394,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -390,11 +407,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -402,11 +421,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -414,11 +435,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -426,11 +449,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -438,11 +463,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -450,11 +477,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -462,11 +491,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -474,11 +505,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -486,11 +519,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -500,7 +535,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7794"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -509,11 +544,23 @@ status = "disabled"; }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7794", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C0>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -525,7 +572,7 @@ i2c1: i2c@e6518000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C1>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -537,7 +584,7 @@ i2c2: i2c@e6530000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C2>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -549,7 +596,7 @@ i2c3: i2c@e6540000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C3>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -561,7 +608,7 @@ i2c4: i2c@e6520000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6520000 0 0x40>; - interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C4>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -573,7 +620,7 @@ i2c5: i2c@e6528000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6528000 0 0x40>; - interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C5>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -585,7 +632,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -597,7 +644,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee100000 0 0x200>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -606,7 +653,7 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -615,7 +662,7 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -624,7 +671,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7794", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -638,7 +685,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7794"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -647,18 +694,18 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7794"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7794"; + compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -669,9 +716,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -689,11 +736,11 @@ }; pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7794"; + compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -704,9 +751,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -724,9 +771,9 @@ }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7794"; + compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; power-domains = <&cpg_clocks>; renesas,buswait = <4>; @@ -759,8 +806,8 @@ compatible = "renesas,du-r8a7794"; reg = <0 0xfeb00000 0 0x40000>; reg-names = "du"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_DU0>, <&mstp7_clks R8A7794_CLK_DU0>; clock-names = "du.0", "du.1"; @@ -797,6 +844,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7794-cpg-clocks", @@ -1068,13 +1124,14 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&p_clk>; + clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>; #clock-cells = <1>; clock-indices = < - R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER + R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 + R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER >; clock-output-names = - "vin1", "vin0", "ether"; + "vin1", "vin0", "etheravb", "ether"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1111,8 +1168,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1120,7 +1177,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1128,8 +1185,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1137,7 +1194,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1145,8 +1202,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1154,8 +1211,8 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 28a033666017..b3d6ec87f615 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -47,6 +47,20 @@ compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c1 { status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 992f9cadbc04..6251d109eff4 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -46,6 +46,58 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + leds: gpio-leds { + compatible = "gpio-leds"; + + work { + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + label = "kylin:red:led"; + pinctrl-names = "default"; + pinctrl-0 = <&led_ctl>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_wake_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - SDIO_RESET_L_WL_RST + * - SDIO_RESET_L_BT_EN + */ + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */ + <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,rt5616-codec"; + simple-audio-card,mclk-fs = <512>; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC1", "Microphone Jack", + "MIC2", "Microphone Jack", + "Microphone Jack", "micbias1", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -60,6 +112,20 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &emmc { status = "okay"; }; @@ -257,6 +323,19 @@ &i2c2 { status = "okay"; + + rt5616: rt5616@1b { + compatible = "rt5616"; + reg = <0x1b>; + clocks = <&cru SCLK_I2S_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; }; &sdio { @@ -264,13 +343,34 @@ broken-cd; bus-width = <4>; + cap-sd-highspeed; cap-sdio-irq; default-sample-phase = <90>; keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; non-removable; num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; +}; + +&uart0 { + status = "okay"; }; &uart2 { @@ -286,12 +386,30 @@ }; &pinctrl { + leds { + led_ctl: led-ctl { + rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>; }; }; + sdio { + bt_wake_h: bt-wake-h { + rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sleep { global_pwroff: global-pwroff { rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index b9567c1e0687..d0f4bb7e1e50 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -60,6 +60,7 @@ serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; + spi = &spi; }; memory { @@ -94,7 +95,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -105,6 +106,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC2>; clock-names = "apb_pclk"; }; @@ -161,7 +163,7 @@ }; usb_otg: usb@10180000 { - compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -176,7 +178,7 @@ }; usb_host: usb@101c0000 { - compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x101c0000 0x40000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -186,6 +188,27 @@ status = "disabled"; }; + emac: ethernet@10200000 { + compatible = "rockchip,rk3036-emac", "snps,arc-emac"; + reg = <0x10200000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + rockchip,grf = <&grf>; + clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref", "macclk"; + /* + * Fix the emac parent clock is DPLL instead of APLL. + * since that will cause some unstable things if the cpufreq + * is working. (e.g: the accurate 50MHz what mac_ref need) + */ + assigned-clocks = <&cru SCLK_MACPLL>; + assigned-clock-parents = <&cru PLL_DPLL>; + max-speed = <100>; + phy-mode = "rmii"; + status = "disabled"; + }; + sdmmc: dwmmc@10214000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -211,7 +234,7 @@ }; emmc: dwmmc@1021c000 { - compatible = "rockchip,rk3288-dw-mshc"; + compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x1021c000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; broken-cd; @@ -241,8 +264,8 @@ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; dmas = <&pdma 0>, <&pdma 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -327,7 +350,7 @@ }; i2c1: i2c@20056000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x20056000 0x1000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -340,7 +363,7 @@ }; i2c2: i2c@2005a000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x2005a000 0x1000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -395,7 +418,7 @@ }; i2c0: i2c@20072000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x20072000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -407,6 +430,21 @@ status = "disabled"; }; + spi: spi@20074000 { + compatible = "rockchip,rockchip-spi"; + reg = <0x20074000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>; + clock-names = "apb-pclk","spi_pclk"; + dmas = <&pdma 8>, <&pdma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3036-pinctrl"; rockchip,grf = <&grf>; @@ -556,6 +594,24 @@ }; }; + emac { + emac_xfer: emac-xfer { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */ + <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */ + <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */ + <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */ + <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */ + <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */ + <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */ + <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */ + }; + + emac_mdio: emac-mdio { + rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */ + <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */ + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, @@ -579,12 +635,12 @@ i2s { i2s_bus: i2s-bus { - rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>, - <1 1 RK_FUNC_1 &pcfg_pull_none>, - <1 2 RK_FUNC_1 &pcfg_pull_none>, - <1 3 RK_FUNC_1 &pcfg_pull_none>, - <1 4 RK_FUNC_1 &pcfg_pull_none>, - <1 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>, + <1 1 RK_FUNC_1 &pcfg_pull_default>, + <1 2 RK_FUNC_1 &pcfg_pull_default>, + <1 3 RK_FUNC_1 &pcfg_pull_default>, + <1 4 RK_FUNC_1 &pcfg_pull_default>, + <1 5 RK_FUNC_1 &pcfg_pull_default>; }; }; @@ -618,5 +674,29 @@ }; /* no rts / cts for uart2 */ }; + + spi { + spi_txd:spi-txd { + rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; + }; + + spi_rxd:spi-rxd { + rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>; + }; + + spi_clk:spi-clk { + rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>; + }; + + spi_cs0:spi-cs0 { + rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>; + + }; + + spi_cs1:spi-cs1 { + rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>; + + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 38c91a839795..6d2a5b3a84a8 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -53,6 +53,18 @@ reg = <0x60000000 0x40000000>; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vcc_sd0: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -74,7 +86,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; button@1 { @@ -82,7 +94,6 @@ linux,code = <104>; label = "GPIO Key Vol-"; linux,input-type = <1>; - gpio-key,wakeup = <0>; debounce-interval = <100>; }; /* VOL+ comes somehow thru the ADC */ @@ -203,6 +214,10 @@ disable-wp; }; +&pwm3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 7cdc308bfac5..a2b763e949b4 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -52,6 +52,18 @@ reg = <0x60000000 0x40000000>; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vcc_sd0: sdmmc-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -194,6 +206,10 @@ }; }; +&pwm3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 341c1f87936a..05533005a809 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -65,7 +65,7 @@ #size-cells = <0>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; @@ -74,6 +74,18 @@ }; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vsys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vsys"; @@ -431,6 +443,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + &saradc { vref-supply = <&vcc_25>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 58bac5053858..cb0a552e0b18 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -61,11 +61,13 @@ reg = <0x0>; operating-points = < /* kHz uV */ - 1008000 1075000 - 816000 1025000 - 600000 1025000 - 504000 1000000 - 312000 975000 + 1416000 1300000 + 1200000 1175000 + 1008000 1125000 + 816000 1125000 + 600000 1100000 + 504000 1100000 + 312000 1075000 >; clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -188,6 +190,16 @@ clock-names = "timer", "pclk"; }; + tsadc: tsadc@20060000 { + compatible = "rockchip,rk3066-tsadc"; + reg = <0x20060000 0x100>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "saradc", "apb_pclk"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + status = "disabled"; + }; + usbphy: phy { compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy"; rockchip,grf = <&grf>; @@ -200,6 +212,7 @@ reg = <0x17c>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -207,6 +220,7 @@ reg = <0x188>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 66fa87d1e2c2..0b6924c97b6b 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -63,7 +63,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 348d46b7ada5..9271833958f9 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -171,6 +171,7 @@ reg = <0x10c>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -178,6 +179,7 @@ reg = <0x11c>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi index 119ff12ab440..4dae42a01509 100644 --- a/arch/arm/boot/dts/rk3228.dtsi +++ b/arch/arm/boot/dts/rk3228.dtsi @@ -96,7 +96,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4faabdb65868..78d47f7d2938 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -110,7 +110,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 4e3fd9aefe34..98c586a43c73 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -91,7 +91,7 @@ #size-cells = <0>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; @@ -408,6 +408,11 @@ output-low; }; + pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { + bias-pull-up; + drive-strength = <12>; + }; + act8846 { pwr_hold: pwr-hold { rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; @@ -457,6 +462,25 @@ }; sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on firefly board so bump up to 12ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + sdmmc_pwr: sdmmc-pwr { rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 65c475642d5a..2ff9689d2e1b 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -74,7 +74,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 17f13c73fe5e..510a1d0d7abb 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -73,7 +73,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 1ece66f3e162..e1ee9f949035 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -61,6 +61,31 @@ clock-output-names = "ext_gmac"; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcc_io>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vccio_pmu>; + gpio30-supply = <&vccio_pmu>; + gpio1830 = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; + }; + + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <150>; + vin-supply = <&vcc_io>; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -85,6 +110,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index c5453a0b07fc..dd3ad2e93a6d 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -49,6 +49,22 @@ stdout-path = "serial2:115200n8"; }; + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + label = "rock2:green:state1"; + linux,default-trigger = "heartbeat"; + }; + + mmc { + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + label = "rock2:blue:state2"; + linux,default-trigger = "mmc0"; + }; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; @@ -70,6 +86,15 @@ #sound-dai-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + }; + vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -95,6 +120,21 @@ }; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -119,7 +159,7 @@ }; &i2c0 { - hym8563@51 { + hym8563: hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; @@ -161,6 +201,12 @@ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &spdif { diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 136d650dd05f..610769d99522 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -108,7 +108,7 @@ lid { label = "Lid"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <0>; /* SW_LID */ linux,input-type = <5>; /* EV_SW */ debounce-interval = <1>; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 9fce91ffff6f..412809c60d01 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -64,7 +64,7 @@ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <100>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -340,11 +340,6 @@ i2c-scl-rising-time-ns = <1000>; }; -&power { - assigned-clocks = <&cru SCLK_EDP_24M>; - assigned-clock-parents = <&xin24m>; -}; - &pwm1 { status = "okay"; }; @@ -421,7 +416,7 @@ status = "okay"; assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; - assigned-clock-parents = <&cru SCLK_OTGPHY0>; + assigned-clock-parents = <&usbphy0>; dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 8ac49f3efc17..31f7e20ef418 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -134,7 +134,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -145,6 +145,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC2>; clock-names = "apb_pclk"; }; @@ -155,6 +156,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; status = "disabled"; @@ -166,6 +168,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; }; @@ -630,6 +633,9 @@ #address-cells = <1>; #size-cells = <0>; + assigned-clocks = <&cru SCLK_EDP_24M>; + assigned-clock-parents = <&xin24m>; + /* * Note: Although SCLK_* are the working clocks * of device without including on the NOC, needed for @@ -815,6 +821,10 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopb>; }; + vopb_out_mipi: endpoint@2 { + reg = <2>; + remote-endpoint = <&mipi_in_vopb>; + }; }; }; @@ -848,6 +858,10 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopl>; }; + vopl_out_mipi: endpoint@2 { + reg = <2>; + remote-endpoint = <&mipi_in_vopl>; + }; }; }; @@ -861,6 +875,37 @@ status = "disabled"; }; + mipi_dsi: mipi@ff960000 { + compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0xff960000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; + clock-names = "ref", "pclk"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + }; + }; + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; @@ -926,6 +971,7 @@ reg = <0x320>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -933,6 +979,7 @@ reg = <0x334>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy2: usb-phy2 { @@ -940,6 +987,7 @@ reg = <0x348>; clocks = <&cru SCLK_OTGPHY2>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 99eeea70223b..99bbcc2c9b89 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -67,7 +67,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -78,6 +78,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA1>; clock-names = "apb_pclk"; }; @@ -88,6 +89,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA1>; clock-names = "apb_pclk"; status = "disabled"; @@ -99,6 +101,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA2>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index aa64faa72970..da24ab570b0e 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -257,7 +257,7 @@ linux,code = <KEY_POWER>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; }; @@ -268,7 +268,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index 3b76eeeb8410..0a33d402138e 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -239,7 +239,7 @@ linux,code = <KEY_POWER>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; }; @@ -250,7 +250,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index da7d210df670..54fcc3fc82e2 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -59,7 +59,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <8>; samsung,keypad-num-columns = <8>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 8344a0ee2b86..ffc36bd24d2f 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -130,7 +130,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; pdma0: dma@e0900000 { diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index 1afe24629d1f..b0c912feaa2f 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -90,7 +90,7 @@ #define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2) #define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1) #define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2) -#define PIN_PA15 14 +#define PIN_PA15 15 #define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) #define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1) #define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1) diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 3f750f6170f2..78996bdbd3df 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -88,12 +88,6 @@ #clock-cells = <0>; clock-frequency = <0>; }; - - adc_op_clk: adc_op_clk{ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - }; }; ns_sram: sram@00200000 { @@ -263,6 +257,44 @@ cache-level = <2>; }; + nand0: nand@80000000 { + compatible = "atmel,sama5d2-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = < /* EBI CS3 */ + 0x80000000 0x08000000 + /* SMC PMECC regs */ + 0xf8014070 0x00000490 + /* SMC PMECC Error Location regs */ + 0xf8014500 0x00000200 + /* ROM Galois tables */ + 0x00040000 0x00018000 + >; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + atmel,has-pmecc; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; + status = "disabled"; + + nfc@c0000000 { + compatible = "atmel,sama5d4-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < /* NFC Command Registers */ + 0xc0000000 0x08000000 + /* NFC HSMC regs */ + 0xf8014000 0x00000070 + /* NFC SRAM banks */ + 0x00100000 0x00100000 + >; + clocks = <&hsmc_clk>; + atmel,write-by-sram; + }; + }; + sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -880,6 +912,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>; + dma-names = "tx", "rx"; clocks = <&uart0_clk>; clock-names = "usart"; status = "disabled"; @@ -889,6 +928,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>; + dma-names = "tx", "rx"; clocks = <&uart1_clk>; clock-names = "usart"; status = "disabled"; @@ -898,6 +944,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(40))>; + dma-names = "tx", "rx"; clocks = <&uart2_clk>; clock-names = "usart"; status = "disabled"; @@ -1016,6 +1069,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(41))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(42))>; + dma-names = "tx", "rx"; clocks = <&uart3_clk>; clock-names = "usart"; status = "disabled"; @@ -1024,6 +1084,13 @@ uart4: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(43))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(44))>; + dma-names = "tx", "rx"; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&uart4_clk>; clock-names = "usart"; @@ -1085,6 +1152,18 @@ status = "disabled"; }; + adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + status = "disabled"; + }; + pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index b8032bca4621..db1151c18466 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1342,7 +1342,7 @@ dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 3a6056f9f0d2..bf825ca4f6f7 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -58,7 +58,7 @@ L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; - interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_a3sm>; arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; @@ -70,8 +70,8 @@ sbsc2: memory-controller@fb400000 { compatible = "renesas,sbsc-sh73a0"; reg = <0xfb400000 0x400>; - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; power-domains = <&pd_a4bc1>; }; @@ -79,22 +79,22 @@ sbsc1: memory-controller@fe400000 { compatible = "renesas,sbsc-sh73a0"; reg = <0xfe400000 0x400>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, - <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; power-domains = <&pd_a4bc0>; }; pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>, - <0 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; }; cmt1: timer@e6138000 { compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48"; reg = <0xe6138000 0x200>; - interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -113,14 +113,14 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH - 0 2 IRQ_TYPE_LEVEL_HIGH - 0 3 IRQ_TYPE_LEVEL_HIGH - 0 4 IRQ_TYPE_LEVEL_HIGH - 0 5 IRQ_TYPE_LEVEL_HIGH - 0 6 IRQ_TYPE_LEVEL_HIGH - 0 7 IRQ_TYPE_LEVEL_HIGH - 0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -135,14 +135,14 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH - 0 10 IRQ_TYPE_LEVEL_HIGH - 0 11 IRQ_TYPE_LEVEL_HIGH - 0 12 IRQ_TYPE_LEVEL_HIGH - 0 13 IRQ_TYPE_LEVEL_HIGH - 0 14 IRQ_TYPE_LEVEL_HIGH - 0 15 IRQ_TYPE_LEVEL_HIGH - 0 16 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -157,14 +157,14 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH - 0 18 IRQ_TYPE_LEVEL_HIGH - 0 19 IRQ_TYPE_LEVEL_HIGH - 0 20 IRQ_TYPE_LEVEL_HIGH - 0 21 IRQ_TYPE_LEVEL_HIGH - 0 22 IRQ_TYPE_LEVEL_HIGH - 0 23 IRQ_TYPE_LEVEL_HIGH - 0 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -179,14 +179,14 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH - 0 26 IRQ_TYPE_LEVEL_HIGH - 0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH - 0 31 IRQ_TYPE_LEVEL_HIGH - 0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -197,10 +197,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH - 0 168 IRQ_TYPE_LEVEL_HIGH - 0 169 IRQ_TYPE_LEVEL_HIGH - 0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks SH73A0_CLK_IIC0>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -211,10 +211,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; - interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH - 0 52 IRQ_TYPE_LEVEL_HIGH - 0 53 IRQ_TYPE_LEVEL_HIGH - 0 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -225,10 +225,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; - interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH - 0 172 IRQ_TYPE_LEVEL_HIGH - 0 173 IRQ_TYPE_LEVEL_HIGH - 0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_IIC2>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -239,10 +239,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; - interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH - 0 184 IRQ_TYPE_LEVEL_HIGH - 0 185 IRQ_TYPE_LEVEL_HIGH - 0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC3>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -253,10 +253,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH - 0 188 IRQ_TYPE_LEVEL_HIGH - 0 189 IRQ_TYPE_LEVEL_HIGH - 0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC4>; power-domains = <&pd_c5>; status = "disabled"; @@ -265,8 +265,8 @@ mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH - 0 141 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -276,7 +276,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e20000 0x0064>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -287,7 +287,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e10000 0x0064>; - interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -298,7 +298,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e00000 0x0064>; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -309,7 +309,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6c90000 0x0064>; - interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -320,9 +320,9 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; - interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH - 0 84 IRQ_TYPE_LEVEL_HIGH - 0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -333,8 +333,8 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH - 0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI1>; power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; @@ -345,8 +345,8 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH - 0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI2>; power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; @@ -357,9 +357,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -367,9 +367,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -377,9 +377,9 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -387,9 +387,9 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -397,9 +397,9 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -407,9 +407,9 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -417,9 +417,9 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -427,9 +427,9 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -437,9 +437,9 @@ scifb: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFB>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -579,7 +579,7 @@ #sound-dai-cells = <1>; compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2"; reg = <0xec230000 0x400>; - interrupts = <0 146 0x4>; + interrupts = <GIC_SPI 146 0x4>; power-domains = <&pd_a4mp>; status = "disabled"; }; @@ -591,7 +591,7 @@ #size-cells = <1>; ranges = <0 0 0x20000000>; reg = <0xfec10000 0x400>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&zb_clk>; power-domains = <&pd_a4s>; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 3ed4abdaaa9c..b89cbde3b289 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -69,7 +69,7 @@ ranges; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -656,6 +656,26 @@ status = "disabled"; }; + eccmgr: eccmgr@ffd08140 { + compatible = "altr,socfpga-ecc-manager"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + l2-ecc@ffd08140 { + compatible = "altr,socfpga-l2-ecc"; + reg = <0xffd08140 0x4>; + interrupts = <0 36 1>, <0 37 1>; + }; + + ocram-ecc@ffd08144 { + compatible = "altr,socfpga-ocram-ecc"; + reg = <0xffd08144 0x4>; + iram = <&ocram>; + interrupts = <0 178 1>, <0 179 1>; + }; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index cce9e50acf68..1c5e139e4d05 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -63,7 +63,7 @@ ranges; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index e48857249ce7..84101e4eebbf 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -161,7 +161,7 @@ linux,code = <0x100>; gpios = <&gpio0 7 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c611f5606dfe..6565f3cb866f 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -223,7 +223,7 @@ linux,code = <0x100>; gpios = <&gpio1 1 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 0aa6fef5ce22..0d0da1f65f0e 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -141,7 +141,7 @@ linux,code = <0x100>; gpios = <&stmpegpio 3 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; button@2 { @@ -149,7 +149,7 @@ linux,code = <0x200>; gpios = <&stmpegpio 2 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index b7b4211c5353..55f9d0cc90f3 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -37,7 +37,6 @@ }; soc { - /* Add Synaptics touch screen, TC35893 keypad etc here */ i2c@80004000 { tc35893@44 { compatible = "toshiba,tc35893"; @@ -159,6 +158,33 @@ vddio-supply = <&db8500_vsmps2_reg>; }; }; + + i2c@80110000 { + synaptics@4b { + /* Synaptics RMI4 TM1217 touchscreen */ + compatible = "syna,rmi4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4b>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&synaptics_tvk_mode>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + rmi-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; + }; + pinctrl { /* Pull up this GPIO pin */ tc35893 { @@ -212,6 +238,15 @@ }; }; }; + synaptics { + synaptics_tvk_mode: synaptics_tvk { + /* Touchscreen uses GPIO 84 */ + tvk_cfg1 { + pins = "GPIO84_C2"; + ste,config = <&gpio_in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index d0c743853318..e2be53343064 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -127,22 +127,14 @@ }; mmcsd_default_mode: mmcsd_default { mmcsd_default_cfg1 { - /* MCCLK */ - pins = "GPIO8_B10"; - ste,output = <0>; - }; - mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ - pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13", "GPIO23_D15"; - ste,output = <1>; - }; - mmcsd_default_cfg3 { - /* MCCMD, MCDAT3-0, MCMSFBCLK */ - pins = "GPIO9_A10", "GPIO11_B11", - "GPIO12_A11", "GPIO13_C12", - "GPIO14_B12", "GPIO24_C15"; - ste,input = <1>; + /* + * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 + * MCCMD, MCDAT3-0, MCMSFBCLK + */ + pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11", + "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12", + "GPIO16_C13", "GPIO23_D15", "GPIO24_C15"; + ste,output = <2>; }; }; }; @@ -729,7 +721,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -802,10 +794,21 @@ clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; - max-frequency = <48000000>; + max-frequency = <400000>; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + full-pwr-cycle; + /* + * The STw4811 circuit used with the Nomadik strictly + * requires that all of these signal direction pins be + * routed and used for its 4-bit levelshifter. + */ + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-dir-cmd; + st,sig-pin-fbclk; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 9c73ac2842ad..2f5107ffeef0 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -384,7 +384,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 6964fc9e97cf..6bfc5959dac3 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -58,18 +58,68 @@ }; memory { - reg = <0xc0000000 0x2000000>; + reg = <0x00000000 0x2000000>; }; aliases { serial0 = &usart1; }; + + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiog 6 1>; + linux,default-trigger = "heartbeat"; + }; + orange { + gpios = <&gpiog 7 1>; + }; + red { + gpios = <&gpiog 10 1>; + }; + blue { + gpios = <&gpiog 12 1>; + }; + }; + + usbotg_hs_phy: usbphy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 30>; + clock-names = "main_clk"; + }; }; &clk_hse { clock-frequency = <25000000>; }; +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_mii>; + pinctrl-names = "default"; + phy-mode = "mii-id"; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + &usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index f0b731db6f53..01408073dd53 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -64,6 +64,17 @@ aliases { serial0 = &usart1; }; + + leds { + compatible = "gpio-leds"; + red { + gpios = <&gpiog 14 0>; + }; + green { + gpios = <&gpiog 13 0>; + linux,default-trigger = "heartbeat"; + }; + }; }; &clk_hse { @@ -71,5 +82,7 @@ }; &usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 5e1e234e8c0a..35df462559ca 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -46,6 +46,7 @@ */ #include "armv7-m.dtsi" +#include <dt-bindings/pinctrl/stm32f429-pinfunc.h> / { clocks { @@ -57,6 +58,8 @@ }; soc { + dma-ranges = <0xc0000000 0x0 0x10000000>; + timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; @@ -168,6 +171,160 @@ status = "disabled"; }; + syscfg: system-config@40013800 { + compatible = "syscon"; + reg = <0x40013800 0x400>; + }; + + pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f429-pinctrl"; + ranges = <0 0x40020000 0x3000>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc 0 0>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc 0 1>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@40020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc 0 2>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@40020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc 0 3>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@40021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc 0 4>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@40021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc 0 5>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@40021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc 0 6>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@40021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc 0 7>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@40022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc 0 8>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@40022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc 0 9>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@40022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc 0 10>; + st,bank-name = "GPIOK"; + }; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32F429_PA9_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F429_PA10_FUNC_USART1_RX>; + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg_hs@0 { + pins { + pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, + <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>, + <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>, + <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>, + <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>, + <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>, + <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>, + <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>, + <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>, + <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>, + <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>, + <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + ethernet0_mii: mii@0 { + pins { + pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, + <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, + <STM32F429_PC2_FUNC_ETH_MII_TXD2>, + <STM32F429_PB8_FUNC_ETH_MII_TXD3>, + <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>, + <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>, + <STM32F429_PA2_FUNC_ETH_MDIO>, + <STM32F429_PC1_FUNC_ETH_MDC>, + <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>, + <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>, + <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>, + <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>, + <STM32F429_PH6_FUNC_ETH_MII_RXD2>, + <STM32F429_PH7_FUNC_ETH_MII_RXD3>; + slew-rate = <2>; + }; + }; + }; + rcc: rcc@40023810 { #clock-cells = <2>; compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; @@ -175,6 +332,62 @@ clocks = <&clk_hse>; }; + dma1: dma-controller@40026000 { + compatible = "st,stm32-dma"; + reg = <0x40026000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&rcc 0 21>; + #dma-cells = <4>; + }; + + dma2: dma-controller@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&rcc 0 22>; + #dma-cells = <4>; + st,mem2mem; + }; + + ethernet0: dwmac@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>, <62>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "tx-clk", "rx-clk"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + dma-ranges; + status = "disabled"; + }; + + usbotg_hs: usb@40040000 { + compatible = "snps,dwc2"; + dma-ranges; + reg = <0x40040000 0x40000>; + interrupts = <77>; + clocks = <&rcc 0 29>; + clock-names = "otg"; + status = "disabled"; + }; + rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts new file mode 100644 index 000000000000..e911af836471 --- /dev/null +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -0,0 +1,75 @@ +/* + * Copyright 2016 - Lee Jones <lee.jones@linaro.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f429.dtsi" + +/ { + model = "STMicroelectronics STM32F469i-DISCO board"; + compatible = "st,stm32f469i-disco", "st,stm32f469"; + + chosen { + bootargs = "root=/dev/ram rdinit=/linuxrc"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x800000>; + }; + + aliases { + serial0 = &usart3; + }; +}; + +&clk_hse { + clock-frequency = <8000000>; +}; + +&usart3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 53660894ea95..023b03efa5ff 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Chuwi V7 CW0825"; @@ -88,6 +89,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5306de4: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 43f58fbe161c..9103864fef90 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -87,6 +87,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb2_vbus { gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ status = "okay"; @@ -102,7 +126,17 @@ allwinner,pins = "PH6"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 77c31dab86b1..04b0d2d1ae6c 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -48,6 +48,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "INet-97F Rev 02"; @@ -93,6 +94,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index ca49b0d0ce1e..bba4f9cf9bf5 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -253,6 +253,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 985e15503378..4e798f014c99 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -1,5 +1,6 @@ /* * Copyright 2015 Josef Gajdusek <atx@atx.name> + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,22 +43,11 @@ /dts-v1/; #include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sunxi-itead-core-common.dtsi" / { model = "Iteaduino Plus A10"; compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ahci { @@ -65,18 +55,6 @@ status = "okay"; }; -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -89,12 +67,7 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - axp209: pmic@34 { - reg = <0x34>; interrupts = <0>; }; }; @@ -135,68 +108,13 @@ status = "okay"; }; -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - ®_ahci_5v { status = "okay"; }; -#include "axp209.dtsi" - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins_a>, <&spi0_cs0_pins_a>; status = "okay"; }; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index ddf0683cbc6a..ee46ea854832 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -44,6 +44,7 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "MK802"; @@ -84,7 +85,25 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb2_vbus_pin_mk802: usb2_vbus_pin@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; @@ -93,6 +112,10 @@ }; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -109,7 +132,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index 530ab28e9ca2..f6898c6b84d4 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -70,6 +70,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index b6ad7850fac6..1867af24ff52 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -709,6 +709,16 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc3_8bit_emmc_pins: mmc3@1 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + allwinner,function = "mmc3"; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index ea69fb8ad4d8..4ec0c8679b2e 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -61,12 +61,14 @@ }; /* eMMC on core board */ -&mmc2 { +&mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_emmc_pins>; + pinctrl-0 = <&mmc3_8bit_emmc_pins>; vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts new file mode 100644 index 000000000000..661c21d9bdbd --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-itead-core-common.dtsi" + +/ { + model = "Itead Ibox A20"; + compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_itead_core>; + + green { + label = "itead_core:green:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + blue { + label = "itead_core:blue:usr"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + axp209: pmic@34 { + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_itead_core: led_pins@0 { + allwinner,pins = "PH20","PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts new file mode 100644 index 000000000000..5ee43d8bf174 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -0,0 +1,287 @@ +/* + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Lamobo R1"; + compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart3; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_lamobo_r1>; + + green { + label = "lamobo_r1:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_lamobo_r1>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci_pwr_pin_a { + allwinner,pins = "PB3"; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + gmac_power_pin_lamobo_r1: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_lamobo_r1: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +#include "axp209.dtsi" + +®_ahci_5v { + gpio = <&pio 1 3 0>; /* PB3 */ + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index c9e648d17a1e..90ff4a267025 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -53,6 +53,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "mk808c"; @@ -125,6 +126,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -145,7 +170,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index c3c626b2cfa2..23aacce4d6c7 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -198,6 +198,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -219,6 +223,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ®_ahci_5v { @@ -254,6 +272,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -268,7 +290,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 6f88fb0ddbc7..7e05e09e61c7 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -381,7 +381,7 @@ allwinner,pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", - "PC15"; + "PC15", "PC16"; allwinner,function = "mmc2"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 13ce68f06dd6..fef6abc0a703 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -68,7 +68,7 @@ }; &lradc { - vref-supply = <®_vcc3v0>; + vref-supply = <®_dcdc1>; status = "okay"; button@200 { @@ -96,7 +96,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -106,13 +106,16 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; &mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; /* eMMC is missing pull-ups */ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; @@ -132,6 +135,76 @@ &r_rsb { status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; &uart0 { diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts new file mode 100644 index 000000000000..342e1d33fa1c --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; + compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644 index 000000000000..88b1e0970b8d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Cubietech Cubietruck Plus"; + compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi new file mode 100644 index 000000000000..d3473f81b12f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -0,0 +1,228 @@ +/* + * Copyright 2015 Vishnu Patekar + * + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + + cpu@100 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu@101 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu@102 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu@103 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* TODO: PRCM block has a mux for this. */ + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + /* + * This is called "internal OSC" in some places. + * It is an internal RC-based oscillator. + * TODO: Its controls are in the PRCM block. + */ + osc16M: osc16M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-output-names = "osc16M"; + }; + + osc16Md512: osc16Md512_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <512>; + clock-mult = <1>; + clocks = <&osc16M>; + clock-output-names = "osc16M-d512"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a83t-pinctrl"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01c20800 0x400>; + clocks = <&osc24M>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB9", "PB10"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index e67df590535f..79f40c3e6101 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/sun4i-a10.h> / { @@ -58,6 +59,62 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + status_led { + label = "orangepi-plus:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + + pwr_led { + label = "orangepi-plus:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + input-name = "sw4"; + + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw4@0 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL03"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &mmc0 { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 1524130e43c9..dadb7f60c062 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -276,6 +276,33 @@ clocks = <&osc24M>, <&pll6 1>, <&pll5>; clock-output-names = "mbus"; }; + + apb0: apb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01f01428 { + compatible = "allwinner,sun8i-h3-apb0-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01f01428 0x4>; + #clock-cells = <1>; + clocks = <&apb0>; + clock-indices = <0>, <1>; + clock-output-names = "apb0_pio", "apb0_ir"; + }; + + ir_clk: ir_clk@01f01454 { + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01f01454 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; }; soc { @@ -359,7 +386,7 @@ gpio-controller; #gpio-cells = <3>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; uart0_pins_a: uart0@0 { allwinner,pins = "PA4", "PA5"; @@ -493,5 +520,40 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; + + apb0_reset: reset@01f014b0 { + reg = <0x01f014b0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_reset 1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_reset 0>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ir_pins_a: ir@0 { + allwinner,pins = "PL11"; + allwinner,function = "s_cir_rx"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 1a69231d2da5..9d2b7e2f5975 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -56,7 +56,6 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - /* backlight is powered by AXP223 DC1SW */ }; chosen { @@ -67,7 +66,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -92,6 +91,82 @@ &r_rsb { status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; &r_uart { @@ -99,3 +174,7 @@ pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 382bd9fc5647..eb2ccd0a3bd5 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -111,9 +111,15 @@ vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + &r_ir { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index c0060e4f7379..d7a20d92b114 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -109,17 +109,6 @@ status = "okay"; }; -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; -}; - -&i2c3_pins_a { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; -}; - &ohci0 { status = "okay"; }; @@ -174,9 +163,15 @@ vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_optimus>; gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ @@ -206,17 +201,6 @@ status = "okay"; }; -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&uart4_pins_a { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; -}; - &usbphy1 { phy-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index e838f206f2a0..f68b3242b33a 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -543,7 +543,7 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, <&mmc0_clk 1>, <&mmc0_clk 2>; @@ -557,7 +557,7 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, <&mmc1_clk 1>, <&mmc1_clk 2>; @@ -571,7 +571,7 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, <&mmc2_clk 1>, <&mmc2_clk 2>; @@ -585,7 +585,7 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, <&mmc3_clk 1>, <&mmc3_clk 2>; @@ -704,7 +704,8 @@ mmc2_8bit_pins: mmc2_8bit { allwinner,pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15"; + "PC13", "PC14", "PC15", + "PC16"; allwinner,function = "mmc2"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi new file mode 100644 index 000000000000..2565d5137a17 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -0,0 +1,136 @@ +/* + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-common-regulators.dtsi" + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi new file mode 100644 index 000000000000..a63272422d76 --- /dev/null +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65217.pdf + */ + +&tps { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi index ea9301aaa461..61a095598206 100644 --- a/arch/arm/boot/dts/uniphier-common32.dtsi +++ b/arch/arm/boot/dts/uniphier-common32.dtsi @@ -45,6 +45,13 @@ /include/ "skeleton.dtsi" / { + clocks { + refclk: ref { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -52,12 +59,6 @@ ranges; interrupt-parent = <&intc>; - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -98,9 +99,17 @@ clocks = <&uart_clk>; }; - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + }; + + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; }; timer@60000200 { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts index f1e9d40149ab..ec94b7a661f2 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -72,14 +72,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 49 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index 34f0d8dcd814..dadd86070c98 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -173,6 +173,10 @@ }; +&refclk { + clock-frequency = <24576000>; +}; + &serial3 { interrupts = <0 29 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index 5baa9fc9c888..b8134c6e094b 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -74,14 +74,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 52 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts new file mode 100644 index 000000000000..d34358632bec --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts @@ -0,0 +1,113 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Ace Board + * + * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" + +/ { + model = "UniPhier PH1-Pro4 Ace Board"; + compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@54 { + compatible = "st,24c64"; + reg = <0x54>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts index 24626687d4df..95f631a3de35 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -74,14 +74,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 50 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts new file mode 100644 index 000000000000..7c3a1fcc9f3c --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts @@ -0,0 +1,108 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Sanji Board + * + * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" + +/ { + model = "UniPhier PH1-Pro4 Sanji Board"; + compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@54 { + compatible = "st,24c64"; + reg = <0x54>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index d78142fb35c4..20f3f2ae7fa4 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -195,6 +195,10 @@ }; }; +&refclk { + clock-frequency = <25000000>; +}; + &pinctrl { compatible = "socionext,ph1-pro4-pinctrl", "syscon"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 2f389ea75e01..24f6f664b269 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -189,6 +189,10 @@ }; }; +&refclk { + clock-frequency = <20000000>; +}; + &pinctrl { compatible = "socionext,ph1-pro5-pinctrl", "syscon"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts index b7a032156789..acb420492b36 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -73,14 +73,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 49 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 691a17d765c2..03292f443305 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -68,6 +68,12 @@ }; clocks { + refclk: ref { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -94,12 +100,6 @@ ranges; interrupt-parent = <&intc>; - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - timer@20000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20000200 0x20>; @@ -216,9 +216,17 @@ clock-frequency = <400000>; }; - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + }; + + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts index fc7250c61674..d594f40e7f76 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -72,14 +72,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 48 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 7d06a1c487d8..6bfd29a05575 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -172,6 +172,10 @@ }; }; +&refclk { + clock-frequency = <25000000>; +}; + &serial3 { interrupts = <0 29 4>; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index f67445f4f10d..24592798a368 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -63,6 +63,11 @@ function = "i2c3"; }; + pinctrl_i2c4: i2c4_grp { + groups = "i2c4"; + function = "i2c4"; + }; + pinctrl_uart0: uart0_grp { groups = "uart0"; function = "uart0"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts index 9d7ec5c204dd..bf2619e4d489 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts @@ -63,6 +63,7 @@ serial1 = &serial1; serial2 = &serial2; i2c0 = &i2c0; + i2c2 = &i2c2; i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; @@ -75,4 +76,13 @@ &i2c0 { status = "okay"; + + eeprom@54 { + compatible = "st,24c64"; + reg = <0x54>; + }; +}; + +&i2c2 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 6bd353f2d77e..4ac484c6ce4e 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -200,6 +200,10 @@ }; }; +&refclk { + clock-frequency = <25000000>; +}; + &pinctrl { compatible = "socionext,proxstream2-pinctrl", "syscon"; }; diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi index 3d29d2806cc0..f7df0881c5e0 100644 --- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -43,7 +43,7 @@ */ &i2c0 { - eeprom { + eeprom@50 { compatible = "microchip,24lc128"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index da271e3b922a..51ecc9b9c0ce 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -42,11 +42,15 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -&extbus { +&system_bus { + status = "okay"; + ranges = <1 0x00000000 0x42000000 0x02000000>; + support_card: support_card { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; ethsc: ethernet@00000000 { compatible = "smsc,lan9118", "smsc,lan9115"; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 6fd7efbead34..d23320af5ea7 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -148,7 +148,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 21b02874bea3..7a556b92e55c 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -66,7 +66,7 @@ }; iofpga@3,00000000 { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 3 0 0x200000>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index e712c0af149b..47e4a115adef 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -65,7 +65,7 @@ }; iofpga@7,00000000 { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 7 0 0x20000>; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index ed65e0f7dfc0..4d8b7f693535 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ / { @@ -18,38 +50,36 @@ clock-frequency = <16000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - sys_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - /* USBH_PEN */ - usbh_vbus_reg: regulator@1 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_reg>; - reg = <1>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; - vin-supply = <&sys_5v0_reg>; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */ + vin-supply = <®_5v0>; }; }; &bl { brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; + power-supply = <®_3v3>; status = "okay"; }; @@ -100,6 +130,10 @@ status = "okay"; }; +®_module_3v3 { + vin-supply = <®_3v3>; +}; + &uart0 { status = "okay"; }; @@ -113,7 +147,7 @@ }; &usbh1 { - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; &iomuxc { diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 6e556be42ccd..fda7f28101e1 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -1,26 +1,77 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ / { bl: backlight { compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; pwms = <&pwm0 0 5000000 0>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; status = "disabled"; }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_module_3v3_avdd: regulator-module-3v3-avdd { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &adc0 { status = "okay"; + vref-supply = <®_module_3v3_avdd>; }; &adc1 { status = "okay"; + vref-supply = <®_module_3v3_avdd>; }; &can0 { @@ -35,6 +86,13 @@ status = "disabled"; }; +&clks { + assigned-clocks = <&clks VF610_CLK_ENET_SEL>, + <&clks VF610_CLK_ENET_TS_SEL>; + assigned-clock-parents = <&clks VF610_CLK_ENET_50M>, + <&clks VF610_CLK_ENET_50M>; +}; + &dspi1 { bus-num = <1>; pinctrl-names = "default"; @@ -50,10 +108,12 @@ pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + disable-wp; }; &fec1 { phy-mode = "rmii"; + phy-supply = <®_module_3v3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; }; @@ -195,6 +255,12 @@ >; }; + pinctrl_gpio_bl_on: gpio_bl_on { + fsl,pins = < + VF610_PAD_PTC0__GPIO_45 0x22ef + >; + }; + pinctrl_i2c0: i2c0grp { fsl,pins = < VF610_PAD_PTB14__I2C0_SCL 0x37ff @@ -239,6 +305,8 @@ fsl,pins = < VF610_PAD_PTB10__UART0_TX 0x21a2 VF610_PAD_PTB11__UART0_RX 0x21a1 + VF610_PAD_PTB12__UART0_RTS 0x21a2 + VF610_PAD_PTB13__UART0_CTS 0x21a1 >; }; diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index c3173fc9e833..b3aeab58f718 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 84f091d1fcf2..3fe1f48c2aec 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf500.dtsi" diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index e976d2fa1527..9d372720ad3f 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2013 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -43,6 +75,15 @@ clocks = <&clks VF610_CLK_PLATFORM_BUS>; }; }; + + aips-bus@40080000 { + pmu@40089000 { + compatible = "arm,cortex-a5-pmu"; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a5_cpu>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index 10ebe99e2751..dbca4f86fdbb 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -14,4 +46,4 @@ / { model = "Toradex Colibri VF61 on Colibri Evaluation Board"; compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610"; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 2d7eab755210..ab4a29f95593 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf610.dtsi" diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 5438ee4be2ec..cdc100732514 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -1,10 +1,42 @@ /* * Copyright 2013 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -96,6 +128,10 @@ &clks { clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; + assigned-clocks = <&clks VF610_CLK_ENET_SEL>, + <&clks VF610_CLK_ENET_TS_SEL>; + assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>, + <&clks VF610_CLK_ENET_EXT>; }; &dspi0 { diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 58bc6e448be5..0cfc060f94d7 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2013 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf500.dtsi" diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a9ceb5bac40e..5c0975451d4e 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2013 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf610-pinfunc.h" @@ -16,6 +48,8 @@ aliases { can0 = &can0; can1 = &can1; + ethernet0 = &fec0; + ethernet1 = &fec1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -174,6 +208,34 @@ status = "disabled"; }; + sai0: sai@4002f000 { + compatible = "fsl,vf610-sai"; + reg = <0x4002f000 0x1000>; + interrupts = <84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI0>, + <&clks VF610_CLK_SAI0_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 17>, + <&edma0 0 16>; + status = "disabled"; + }; + + sai1: sai@40030000 { + compatible = "fsl,vf610-sai"; + reg = <0x40030000 0x1000>; + interrupts = <85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI1>, + <&clks VF610_CLK_SAI1_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 19>, + <&edma0 0 18>; + status = "disabled"; + }; + sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; @@ -188,6 +250,20 @@ status = "disabled"; }; + sai3: sai@40032000 { + compatible = "fsl,vf610-sai"; + reg = <0x40032000 0x1000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI3>, + <&clks VF610_CLK_SAI3_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 9>, + <&edma0 1 8>; + status = "disabled"; + }; + pit: pit@40037000 { compatible = "fsl,vf610-pit"; reg = <0x40037000 0x1000>; @@ -558,6 +634,24 @@ status = "disabled"; }; + dac0: dac@400cc000 { + compatible = "fsl,vf610-dac"; + reg = <0x400cc000 1000>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dac"; + clocks = <&clks VF610_CLK_DAC0>; + status = "disabled"; + }; + + dac1: dac@400cd000 { + compatible = "fsl,vf610-dac"; + reg = <0x400cd000 1000>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dac"; + clocks = <&clks VF610_CLK_DAC1>; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; @@ -629,5 +723,10 @@ status = "disabled"; }; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 16>, <&adc1 16>; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 9efd16cb2859..307ed201d658 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -34,7 +34,7 @@ }; chosen { - bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; + bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index cb64209bca08..e96959b2e67a 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -30,7 +30,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index abf5d238ae04..be6a986bbbd8 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -30,7 +30,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index b9f2522012e8..7250c1eac7f9 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -29,7 +29,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index 16c9cacd668d..d9e0f3e70671 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -29,10 +29,15 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; + usb_phy0: phy0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio0 46 1>; + }; }; &clkc { @@ -56,3 +61,9 @@ &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c index 2dc6da70ae59..d7ed252708c5 100644 --- a/arch/arm/common/icst.c +++ b/arch/arm/common/icst.c @@ -16,7 +16,7 @@ */ #include <linux/module.h> #include <linux/kernel.h> - +#include <asm/div64.h> #include <asm/hardware/icst.h> /* @@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div); unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) { - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); + u64 dividend = p->ref * 2 * (u64)(vco.v + 8); + u32 divisor = (vco.r + 2) * p->s2div[vco.s]; + + do_div(dividend, divisor); + return (unsigned long)dividend; } EXPORT_SYMBOL(icst_hz); @@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq) if (f > p->vco_min && f <= p->vco_max) break; + i++; } while (i < 8); if (i >= 8) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 3d224941b541..fb0a0a4dfea4 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1290,7 +1290,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv) struct sa1111_dev *dev = SA1111_DEV(_dev); struct sa1111_driver *drv = SA1111_DRV(_drv); - return dev->devid & drv->devid; + return !!(dev->devid & drv->devid); } static int sa1111_bus_suspend(struct device *dev, pm_message_t state) diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index e0df333202b8..9ba45ade5f48 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -69,7 +69,7 @@ static void __scoop_gpio_set(struct scoop_dev *sdev, static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; spin_lock_irqsave(&sdev->scoop_lock, flags); @@ -81,7 +81,7 @@ static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); /* XXX: I'm unsure, but it seems so */ return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1))); @@ -90,7 +90,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) static int scoop_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; unsigned short gpcr; @@ -108,7 +108,7 @@ static int scoop_gpio_direction_input(struct gpio_chip *chip, static int scoop_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; unsigned short gpcr; @@ -224,7 +224,7 @@ static int scoop_probe(struct platform_device *pdev) devptr->gpio.direction_input = scoop_gpio_direction_input; devptr->gpio.direction_output = scoop_gpio_direction_output; - ret = gpiochip_add(&devptr->gpio); + ret = gpiochip_add_data(&devptr->gpio, devptr); if (ret) goto err_gpio; } diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 72def201c4fd..1ef69fcbdf2e 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -6,13 +6,13 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y -CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y @@ -26,7 +26,6 @@ CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y CONFIG_CC_STACKPROTECTOR_REGULAR=y CONFIG_ARCH_MULTI_V6=y -# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y @@ -107,8 +106,10 @@ CONFIG_STAGING=y CONFIG_MAILBOX=y CONFIG_BCM2835_MBOX=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_RASPBERRYPI_POWER=y CONFIG_PWM=y CONFIG_PWM_BCM2835=y +CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -142,7 +143,5 @@ CONFIG_TEST_KSTRTOX=y CONFIG_KGDB=y CONFIG_KGDB_KDB=y CONFIG_STRICT_DEVMEM=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 18c311ae1113..0b9211b2b73b 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -166,7 +166,6 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA1=m diff --git a/arch/arm/configs/dram_0x00000000.config b/arch/arm/configs/dram_0x00000000.config new file mode 100644 index 000000000000..db96dcb420ce --- /dev/null +++ b/arch/arm/configs/dram_0x00000000.config @@ -0,0 +1 @@ +CONFIG_DRAM_BASE=0x00000000 diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 24dcd2bb1215..6ffd7e76f3ce 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -26,12 +26,14 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -193,7 +195,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8997=y CONFIG_RTC_DRV_MAX77686=y -CONFIG_RTC_DRV_MAX77802=y CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y @@ -238,7 +239,12 @@ CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_DEV_S5P=y +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRC_CCITT=y CONFIG_FONTS=y CONFIG_FONT_7x14=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index d3a8018639de..9083399a8ab1 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -6,6 +6,7 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y +CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -24,14 +25,12 @@ CONFIG_ARCH_MXC=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y -CONFIG_MACH_EUKREA_CPUIMX25SD=y -CONFIG_SOC_IMX25=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y -CONFIG_MACH_MXT_TD60=y CONFIG_MACH_IMX27_DT=y +CONFIG_SOC_IMX25=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -88,6 +87,7 @@ CONFIG_KEYBOARD_IMX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_MX25=y CONFIG_TOUCHSCREEN_MC13783=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m @@ -107,6 +107,7 @@ CONFIG_HWMON=m CONFIG_SENSORS_MC13783_ADC=m CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_MFD_MX25_TSADC=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -169,11 +170,11 @@ CONFIG_RTC_DRV_IMXDI=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y -CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y +CONFIG_IMX_SDMA=y # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y +CONFIG_IIO=y +CONFIG_FSL_MX25_ADC=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y @@ -187,6 +188,5 @@ CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 2d5253dcc226..978c5deeb47c 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -47,6 +47,7 @@ CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_IMX6=y CONFIG_SMP=y +CONFIG_ARM_PSCI=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_HIGHMEM=y @@ -56,6 +57,7 @@ CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_ARM_IMX6Q_CPUFREQ=y +CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=m @@ -71,7 +73,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_IPV6=y CONFIG_NETFILTER=y CONFIG_CAN=y CONFIG_CAN_FLEXCAN=y @@ -103,10 +104,13 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_NAND_VF610_NFC=y CONFIG_MTD_NAND_MXC=y CONFIG_MTD_SPI_NOR=y CONFIG_SPI_FSL_QUADSPI=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 @@ -144,7 +148,6 @@ CONFIG_USB_RTL8152=m CONFIG_USB_USBNET=m CONFIG_USB_NET_CDC_EEM=m CONFIG_BRCMFMAC=m -CONFIG_WL_TI=y CONFIG_WL12XX=m CONFIG_WLCORE_SDIO=m # CONFIG_WILINK_PLATFORM_DATA is not set @@ -163,6 +166,7 @@ CONFIG_TOUCHSCREEN_MC13783=y CONFIG_TOUCHSCREEN_TSC2007=y CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SX8654=y +CONFIG_TOUCHSCREEN_COLIBRI_VF50=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m @@ -172,7 +176,6 @@ CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y -CONFIG_HW_RANDOM=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set @@ -181,6 +184,7 @@ CONFIG_I2C_ALGOPCA=m CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y +CONFIG_SPI_FSL_DSPI=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y CONFIG_GPIO_PCA953X=y @@ -191,6 +195,7 @@ CONFIG_POWER_RESET_IMX=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y CONFIG_SENSORS_GPIO_FAN=y +CONFIG_SENSORS_IIO_HWMON=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_IMX_THERMAL=y @@ -226,7 +231,6 @@ CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_DW_HDMI_AHB_AUDIO=m CONFIG_DRM_IMX=y -CONFIG_DRM_IMX_FB_HELPER=y CONFIG_DRM_IMX_PARALLEL_DISPLAY=y CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_LDB=y @@ -270,6 +274,7 @@ CONFIG_USB_EHSET_TEST_FIXTURE=m CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y +CONFIG_USB_FSL_USB2=y CONFIG_USB_CONFIGFS=m CONFIG_USB_CONFIGFS_SERIAL=y CONFIG_USB_CONFIGFS_ACM=y @@ -295,6 +300,7 @@ CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y @@ -311,15 +317,18 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_RTC_DRV_SNVS=y CONFIG_DMADEVICES=y +CONFIG_FSL_EDMA=y CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y -CONFIG_FSL_EDMA=y CONFIG_STAGING=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_VF610_ADC=y CONFIG_PWM=y +CONFIG_PWM_FSL_FTM=y CONFIG_PWM_IMX=y +CONFIG_NVMEM=y +CONFIG_NVMEM_IMX_OCOTP=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -327,9 +336,6 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set @@ -364,6 +370,7 @@ CONFIG_PROVE_LOCKING=y # CONFIG_ARM_UNWIND is not set CONFIG_SECURITYFS=y CONFIG_CRYPTO_DEV_FSL_CAAM=y +CONFIG_CRYPTO_DEV_SAHARA=y CONFIG_CRC_CCITT=m CONFIG_CRC_T10DIF=y CONFIG_CRC7=m diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 4fa94a1f115b..652b7bd9e544 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -95,7 +95,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_NLS=y CONFIG_DEBUG_USER=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index c3058da631da..aa3af0a6b8f7 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -108,7 +108,6 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 9c93f5655248..0b02e4f43c6a 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -158,6 +158,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y +CONFIG_EEPROM_AT24=y CONFIG_SPI=y CONFIG_SPI_S3C24XX=y CONFIG_SPI_SPIDEV=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 1f9ca4737ef6..e11d99d529ee 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 +CONFIG_BLK_DEV_INITRD=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_KPROBES=y @@ -91,15 +92,15 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_NET_DSA_MV88E6171=y CONFIG_NET_DSA_MV88E6352=y CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y -CONFIG_MWL8K=m CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y +CONFIG_MWL8K=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 314f6be2dca2..28234906a064 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -16,6 +16,8 @@ CONFIG_ARCH_MULTI_V7=y # CONFIG_ARCH_MULTI_V4 is not set CONFIG_ARCH_VIRT=y CONFIG_ARCH_ALPINE=y +CONFIG_ARCH_ARTPEC=y +CONFIG_MACH_ARTPEC6=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -33,6 +35,7 @@ CONFIG_ARCH_BCM_NSP=y CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y @@ -182,6 +185,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_BRCMNAND=y +CONFIG_MTD_NAND_VF610_NFC=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_SPI_FSL_QUADSPI=m @@ -227,6 +231,7 @@ CONFIG_R8169=y CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y +CONFIG_SYNOPSYS_DWC_ETH_QOS=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y @@ -318,6 +323,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_AT91=m +CONFIG_I2C_BCM2835=y CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m @@ -341,6 +347,8 @@ CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=m CONFIG_SPI=y CONFIG_SPI_ATMEL=m +CONFIG_SPI_BCM2835=y +CONFIG_SPI_BCM2835AUX=y CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_FSL_DSPI=m @@ -363,6 +371,7 @@ CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y +CONFIG_PINCTRL_BCM2835=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y @@ -403,6 +412,7 @@ CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_RMOBILE=y CONFIG_POWER_AVS=y CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_SENSORS_NTC_THERMISTOR=m @@ -426,6 +436,7 @@ CONFIG_SUNXI_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y +CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y @@ -467,6 +478,7 @@ CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y +CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8973=y @@ -527,6 +539,7 @@ CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_VC4=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y @@ -559,6 +572,7 @@ CONFIG_SND_SOC_ROCKCHIP_RT5645=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_RSRC_CARD=m +CONFIG_SND_SUN4I_CODEC=m CONFIG_SND_SOC_SAMSUNG=m CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROIDX2=m @@ -577,6 +591,7 @@ CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y +CONFIG_USB_XHCI_RCAR=m CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MSM=m CONFIG_USB_EHCI_EXYNOS=y @@ -591,9 +606,12 @@ CONFIG_USB_OHCI_EXYNOS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SUNXI=m CONFIG_USB_DWC3=y CONFIG_USB_DWC2=m CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y CONFIG_KEYSTONE_USB_PHY=y @@ -603,6 +621,7 @@ CONFIG_USB_ISP1301=y CONFIG_USB_MSM_OTG=m CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y +CONFIG_USB_FSL_USB2=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_ETH=m CONFIG_MMC=y @@ -621,6 +640,7 @@ CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y +CONFIG_MMC_SDHCI_BCM2835=y CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y @@ -664,7 +684,6 @@ CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m -CONFIG_RTC_DRV_MAX77802=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_ST_LPC=y @@ -690,7 +709,7 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y -CONFIG_FSL_EDMA=m +CONFIG_FSL_EDMA=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y CONFIG_SH_DMAE=y @@ -703,6 +722,7 @@ CONFIG_PL330_DMA=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y CONFIG_MXS_DMA=y +CONFIG_DMA_BCM2835=y CONFIG_DMA_OMAP=y CONFIG_QCOM_BAM_DMA=y CONFIG_XILINX_VDMA=y @@ -749,8 +769,10 @@ CONFIG_IIO=y CONFIG_AT91_ADC=m CONFIG_BERLIN2_ADC=m CONFIG_EXYNOS_ADC=m +CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y CONFIG_AK8975=y +CONFIG_RASPBERRYPI_POWER=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_TCB=m @@ -763,6 +785,7 @@ CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y CONFIG_PWM_STI=m +CONFIG_PWM_BCM2835=y CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_PHY_BERLIN_USB=y @@ -779,6 +802,8 @@ CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_SAMSUNG_USB2=m CONFIG_NVMEM=y CONFIG_NVMEM_SUNXI_SID=y +CONFIG_BCM2835_MBOX=y +CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index af29780accdc..4562006aae68 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -92,7 +92,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_NET_DSA_MV88E6171=y CONFIG_NET_DSA_MV88E6352=y CONFIG_MV643XX_ETH=y @@ -137,6 +137,7 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_SOC_ALC5623=y +CONFIG_SND_SOC_CS42L51_I2C=y CONFIG_SND_SIMPLE_CARD=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index c6729bf0a8dd..dc5797a2efab 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_PXA3xx=y CONFIG_MTD_SPI_NOR=y +CONFIG_SRAM=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y @@ -109,6 +110,7 @@ CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index b47e7c6628c9..6e0f751be229 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -12,6 +12,7 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_IPC_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_MODULES=y @@ -141,9 +142,8 @@ CONFIG_IIO=y CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_PWM=y CONFIG_PWM_MXS=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y +CONFIG_NVMEM=y +CONFIG_NVMEM_MXS_OCOTP=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_FSCACHE=m @@ -178,7 +178,6 @@ CONFIG_PROVE_LOCKING=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_USER=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MXS_DCP=y CONFIG_CRC_ITU_T=m CONFIG_CRC7=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c5e1943e5427..156bc88b8523 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y +CONFIG_ARM_KERNMEM_PERMS=y CONFIG_ARM_ERRATA_411920=y CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y @@ -144,6 +145,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_TSL2550=m CONFIG_BMP085_I2C=m CONFIG_SRAM=y +CONFIG_EEPROM_AT24=m CONFIG_SENSORS_LIS3_I2C=m CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SCAN_ASYNC=y @@ -177,6 +179,7 @@ CONFIG_TI_CPTS=y CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=m +CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y @@ -276,6 +279,7 @@ CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS65910=y CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y @@ -286,28 +290,35 @@ CONFIG_REGULATOR_TPS65217=y CONFIG_REGULATOR_TPS65218=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_OMAP3=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_TVP5150=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP5_DSS_HDMI=y +CONFIG_FB_OMAP2_DSS_SDI=y +CONFIG_FB_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_DISPLAY_PANEL_DSI_CM=m -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m +CONFIG_FB_OMAP2_ENCODER_TFP410=m +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m +CONFIG_FB_OMAP2_CONNECTOR_DVI=m +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m +CONFIG_FB_OMAP2_PANEL_DPI=m +CONFIG_FB_OMAP2_PANEL_DSI_CM=m +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y @@ -354,6 +365,11 @@ CONFIG_USB_MUSB_DSPS=m CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_DWC3=m +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_TEST=m CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=m @@ -387,6 +403,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PWM=m +CONFIG_LEDS_PCA963X=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m @@ -404,7 +421,8 @@ CONFIG_RTC_DRV_OMAP=m CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y -# CONFIG_IOMMU_SUPPORT is not set +CONFIG_IOMMU_SUPPORT=y +CONFIG_OMAP_IOMMU=y CONFIG_EXTCON=m CONFIG_EXTCON_USB_GPIO=m CONFIG_EXTCON_PALMAS=m @@ -449,6 +467,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 5876ce7af130..6a5bc27538f1 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -86,7 +86,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_MV643XX_ETH=y CONFIG_MARVELL_PHY=y # CONFIG_INPUT_MOUSEDEV is not set diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 0cb724b5c639..dc5517eaf09f 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -378,6 +378,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_MAX7301=m +CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=m CONFIG_BATTERY_SBS=m diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig deleted file mode 100644 index 93efdcfcf98f..000000000000 --- a/arch/arm/configs/realview-smp_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_NO_HZ_FULL=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_REALVIEW=y -CONFIG_REALVIEW_DT=y -CONFIG_MACH_REALVIEW_EB=y -CONFIG_REALVIEW_EB_ARM1136=y -CONFIG_REALVIEW_EB_ARM1176=y -CONFIG_REALVIEW_EB_A9MP=y -CONFIG_REALVIEW_EB_ARM11MP=y -CONFIG_REALVIEW_EB_ARM11MP_REVB=y -CONFIG_MACH_REALVIEW_PB11MP=y -CONFIG_MACH_REALVIEW_PB1176=y -CONFIG_MACH_REALVIEW_PBA8=y -CONFIG_MACH_REALVIEW_PBX=y -CONFIG_SMP=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" -CONFIG_VFP=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_ROM=y -CONFIG_MTD_PHYSMAP=y -CONFIG_ARM_CHARLCD=y -CONFIG_NETDEVICES=y -CONFIG_SMC91X=y -CONFIG_SMSC911X=y -CONFIG_SMSC_PHY=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_AMBAKMI=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_VERSATILE=y -CONFIG_SPI=y -CONFIG_GPIOLIB=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -# CONFIG_SND_DRIVERS is not set -CONFIG_SND_ARMAACI=y -CONFIG_USB=y -CONFIG_USB_ISP1760=y -CONFIG_MMC=y -CONFIG_MMC_ARMMMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_VERSATILE=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PL031=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 8f56fb3ff51d..9e77dc7b828f 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -1,5 +1,6 @@ # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ_FULL=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_PERF_EVENTS=y @@ -21,6 +22,7 @@ CONFIG_MACH_REALVIEW_PB11MP=y CONFIG_MACH_REALVIEW_PB1176=y CONFIG_MACH_REALVIEW_PBA8=y CONFIG_MACH_REALVIEW_PBX=y +CONFIG_SMP=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -46,6 +48,8 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP=y CONFIG_ARM_CHARLCD=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_SMC91X=y CONFIG_SMSC911X=y @@ -74,6 +78,7 @@ CONFIG_SND_PCM_OSS=y # CONFIG_SND_DRIVERS is not set CONFIG_SND_ARMAACI=y CONFIG_USB=y +CONFIG_USB_STORAGE=y CONFIG_USB_ISP1760=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f3142369f594..b3ade552a2a5 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -290,6 +290,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y +CONFIG_EEPROM_AT24=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_S3C24XX=m diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index c11bab735125..afbda413d61a 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -187,6 +187,7 @@ CONFIG_AT_XDMAC=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y +CONFIG_AT91_SAMA5D2_ADC=y CONFIG_PWM=y CONFIG_PWM_ATMEL=y CONFIG_PWM_ATMEL_TCB=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 969738324a5d..b7b714c3958c 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -20,7 +20,6 @@ CONFIG_ARCH_R8A7791=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y -CONFIG_CPU_BPREDICT_DISABLE=y CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_754322=y CONFIG_PCI=y @@ -163,6 +162,8 @@ CONFIG_SND_SOC_RSRC_CARD=y CONFIG_SND_SOC_AK4642=y CONFIG_SND_SOC_WM8978=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_RCAR=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_R8A66597_HCD=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index f7f4e2e3cc33..753f1a5defc7 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_CPUSETS=y CONFIG_NAMESPACES=y +CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y @@ -107,4 +108,3 @@ CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set CONFIG_ENABLE_DEFAULT_TRACERS=y CONFIG_DEBUG_USER=y -CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index ec5250547d14..1e5ec2a0e4cf 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -52,6 +52,7 @@ CONFIG_SERIAL_STM32_CONSOLE=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_DMADEVICES=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index a9a81a714be4..81a1b92fd4e6 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -58,6 +58,7 @@ CONFIG_STMMAC_ETH=y # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_SUN4I_LRADC=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y @@ -92,15 +93,27 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_GPIO=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_RC_SUPPORT=y +CONFIG_RC_DEVICES=y +CONFIG_IR_SUNXI=y CONFIG_FB=y CONFIG_FB_SIMPLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SUN4I_CODEC=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 4bc870028035..0ada29d568ec 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -214,7 +214,6 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_USER=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=m diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b445a5d56f43..da3c0428507b 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -15,6 +15,7 @@ #include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <linux/module.h> +#include <crypto/xts.h> MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); @@ -152,6 +153,10 @@ static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm); int ret; + ret = xts_check_key(tfm, in_key, key_len); + if (ret) + return ret; + ret = ce_aes_expandkey(&ctx->key1, in_key, key_len / 2); if (!ret) ret = ce_aes_expandkey(&ctx->key2, &in_key[key_len / 2], @@ -364,7 +369,7 @@ static struct crypto_alg aes_algs[] = { { .cra_blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ce_aes_setkey, .encrypt = ecb_encrypt, .decrypt = ecb_decrypt, @@ -441,7 +446,7 @@ static struct crypto_alg aes_algs[] = { { .cra_ablkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ablk_set_key, .encrypt = ablk_encrypt, .decrypt = ablk_decrypt, diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c index 6d685298690e..0511a6cafe24 100644 --- a/arch/arm/crypto/aesbs-glue.c +++ b/arch/arm/crypto/aesbs-glue.c @@ -13,6 +13,7 @@ #include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <linux/module.h> +#include <crypto/xts.h> #include "aes_glue.h" @@ -89,6 +90,11 @@ static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, { struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm); int bits = key_len * 4; + int err; + + err = xts_check_key(tfm, in_key, key_len); + if (err) + return err; if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) { tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 16da6380eb85..55e0e3ea9cb6 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,6 +1,7 @@ generic-y += bitsperlong.h +generic-y += clkdev.h generic-y += cputime.h generic-y += current.h generic-y += early_ioremap.h @@ -23,7 +24,6 @@ generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h generic-y += seccomp.h -generic-y += sections.h generic-y += segment.h generic-y += sembuf.h generic-y += serial.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 7da5503c0591..e08d15184056 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void) u32 irqstat; asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat)); + dsb(sy); return irqstat; } diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index d5525bfc7e3e..9156fc303afd 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -491,7 +491,6 @@ static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; } #endif #ifdef CONFIG_DEBUG_RODATA -void mark_rodata_ro(void); void set_kernel_text_rw(void); void set_kernel_text_ro(void); #else diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h index 523315115478..524692f4acab 100644 --- a/arch/arm/include/asm/checksum.h +++ b/arch/arm/include/asm/checksum.h @@ -84,10 +84,10 @@ ip_fast_csum(const void *iph, unsigned int ihl) } static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) { - u32 lenprot = len | proto << 16; + u32 lenprot = len + proto; if (__builtin_constant_p(sum) && sum == 0) { __asm__( "adds %0, %1, %2 @ csum_tcpudp_nofold0 \n\t" @@ -121,8 +121,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, * returns a 16-bit checksum, already complemented */ static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) +csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) { return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); } @@ -144,8 +144,8 @@ __csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __ __be32 proto, __wsum sum); static inline __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len, - unsigned short proto, __wsum sum) +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, __u8 proto, __wsum sum) { return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len), htonl(proto), sum)); diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h deleted file mode 100644 index 4e8a4b27d7c7..000000000000 --- a/arch/arm/include/asm/clkdev.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/clkdev.h - * - * Copyright (C) 2008 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Helper for the clk API to assist looking up a struct clk. - */ -#ifndef __ASM_CLKDEV_H -#define __ASM_CLKDEV_H - -#include <linux/slab.h> - -#ifndef CONFIG_COMMON_CLK -#ifdef CONFIG_HAVE_MACH_CLKDEV -#include <mach/clkdev.h> -#else -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) -#endif -#endif - -static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) -{ - return kzalloc(size, GFP_KERNEL); -} - -#endif diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index e1f07764b0d6..7d919a9b32e5 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -74,7 +74,7 @@ static inline uint32_t __div64_32(uint64_t *n, uint32_t base) static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) { unsigned long long res; - unsigned int tmp = 0; + register unsigned int tmp asm("ip") = 0; if (!bias) { asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" @@ -90,12 +90,12 @@ static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) : "r" (m), "r" (n) : "cc"); } else { - asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" - "cmn %Q0, %Q1\n\t" - "adcs %R0, %R0, %R1\n\t" - "adc %Q0, %3, #0" - : "=&r" (res) - : "r" (m), "r" (n), "r" (tmp) + asm ( "umull %Q0, %R0, %Q2, %Q3\n\t" + "cmn %Q0, %Q2\n\t" + "adcs %R0, %R0, %R2\n\t" + "adc %Q0, %1, #0" + : "=&r" (res), "+&r" (tmp) + : "r" (m), "r" (n) : "cc"); } diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h index 5abaf5bbd985..bf1991263d2d 100644 --- a/arch/arm/include/asm/exception.h +++ b/arch/arm/include/asm/exception.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARM_EXCEPTION_H #define __ASM_ARM_EXCEPTION_H -#include <linux/ftrace.h> +#include <linux/interrupt.h> #define __exception __attribute__((section(".exception.text"))) #ifdef CONFIG_FUNCTION_GRAPH_TRACER diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 194c91b610ff..3d5a5cd071bd 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -19,38 +19,7 @@ #ifndef __ARM_KVM_ASM_H__ #define __ARM_KVM_ASM_H__ -/* 0 is reserved as an invalid value. */ -#define c0_MPIDR 1 /* MultiProcessor ID Register */ -#define c0_CSSELR 2 /* Cache Size Selection Register */ -#define c1_SCTLR 3 /* System Control Register */ -#define c1_ACTLR 4 /* Auxiliary Control Register */ -#define c1_CPACR 5 /* Coprocessor Access Control */ -#define c2_TTBR0 6 /* Translation Table Base Register 0 */ -#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */ -#define c2_TTBR1 8 /* Translation Table Base Register 1 */ -#define c2_TTBR1_high 9 /* TTBR1 top 32 bits */ -#define c2_TTBCR 10 /* Translation Table Base Control R. */ -#define c3_DACR 11 /* Domain Access Control Register */ -#define c5_DFSR 12 /* Data Fault Status Register */ -#define c5_IFSR 13 /* Instruction Fault Status Register */ -#define c5_ADFSR 14 /* Auxilary Data Fault Status R */ -#define c5_AIFSR 15 /* Auxilary Instrunction Fault Status R */ -#define c6_DFAR 16 /* Data Fault Address Register */ -#define c6_IFAR 17 /* Instruction Fault Address Register */ -#define c7_PAR 18 /* Physical Address Register */ -#define c7_PAR_high 19 /* PAR top 32 bits */ -#define c9_L2CTLR 20 /* Cortex A15/A7 L2 Control Register */ -#define c10_PRRR 21 /* Primary Region Remap Register */ -#define c10_NMRR 22 /* Normal Memory Remap Register */ -#define c12_VBAR 23 /* Vector Base Address Register */ -#define c13_CID 24 /* Context ID Register */ -#define c13_TID_URW 25 /* Thread ID, User R/W */ -#define c13_TID_URO 26 /* Thread ID, User R/O */ -#define c13_TID_PRIV 27 /* Thread ID, Privileged */ -#define c14_CNTKCTL 28 /* Timer Control Register (PL1) */ -#define c10_AMAIR0 29 /* Auxilary Memory Attribute Indirection Reg0 */ -#define c10_AMAIR1 30 /* Auxilary Memory Attribute Indirection Reg1 */ -#define NR_CP15_REGS 31 /* Number of regs (incl. invalid) */ +#include <asm/virt.h> #define ARM_EXCEPTION_RESET 0 #define ARM_EXCEPTION_UNDEFINED 1 @@ -79,6 +48,8 @@ #define rr_lo_hi(a1, a2) a1, a2 #endif +#define kvm_ksym_ref(kva) (kva) + #ifndef __ASSEMBLY__ struct kvm; struct kvm_vcpu; @@ -86,19 +57,15 @@ struct kvm_vcpu; extern char __kvm_hyp_init[]; extern char __kvm_hyp_init_end[]; -extern char __kvm_hyp_exit[]; -extern char __kvm_hyp_exit_end[]; - extern char __kvm_hyp_vector[]; -extern char __kvm_hyp_code_start[]; -extern char __kvm_hyp_code_end[]; - extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); + +extern void __init_stage2_translation(void); #endif #endif /* __ARM_KVM_ASM_H__ */ diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 3095df091ff8..ee5328fc4b06 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -68,12 +68,12 @@ static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu) static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu) { - return &vcpu->arch.regs.usr_regs.ARM_pc; + return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_pc; } static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu) { - return &vcpu->arch.regs.usr_regs.ARM_cpsr; + return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr; } static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) @@ -83,13 +83,13 @@ static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) static inline bool mode_has_spsr(struct kvm_vcpu *vcpu) { - unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK; + unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK; return (cpsr_mode > USR_MODE && cpsr_mode < SYSTEM_MODE); } static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu) { - unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK; + unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK; return cpsr_mode > USR_MODE;; } @@ -108,11 +108,6 @@ static inline phys_addr_t kvm_vcpu_get_fault_ipa(struct kvm_vcpu *vcpu) return ((phys_addr_t)vcpu->arch.fault.hpfar & HPFAR_MASK) << 8; } -static inline unsigned long kvm_vcpu_get_hyp_pc(struct kvm_vcpu *vcpu) -{ - return vcpu->arch.fault.hyp_pc; -} - static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu) { return kvm_vcpu_get_hsr(vcpu) & HSR_ISV; @@ -143,6 +138,11 @@ static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu) return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW; } +static inline bool kvm_vcpu_dabt_is_cm(struct kvm_vcpu *vcpu) +{ + return !!(kvm_vcpu_get_hsr(vcpu) & HSR_DABT_CM); +} + /* Get Access Size from a data abort */ static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu) { @@ -192,7 +192,7 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu) static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu) { - return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK; + return vcpu_cp15(vcpu, c0_MPIDR) & MPIDR_HWID_BITMASK; } static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu) diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index f9f27792d8ed..385070180c25 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -85,20 +85,61 @@ struct kvm_vcpu_fault_info { u32 hsr; /* Hyp Syndrome Register */ u32 hxfar; /* Hyp Data/Inst. Fault Address Register */ u32 hpfar; /* Hyp IPA Fault Address Register */ - u32 hyp_pc; /* PC when exception was taken from Hyp mode */ }; -typedef struct vfp_hard_struct kvm_cpu_context_t; +/* + * 0 is reserved as an invalid value. + * Order should be kept in sync with the save/restore code. + */ +enum vcpu_sysreg { + __INVALID_SYSREG__, + c0_MPIDR, /* MultiProcessor ID Register */ + c0_CSSELR, /* Cache Size Selection Register */ + c1_SCTLR, /* System Control Register */ + c1_ACTLR, /* Auxiliary Control Register */ + c1_CPACR, /* Coprocessor Access Control */ + c2_TTBR0, /* Translation Table Base Register 0 */ + c2_TTBR0_high, /* TTBR0 top 32 bits */ + c2_TTBR1, /* Translation Table Base Register 1 */ + c2_TTBR1_high, /* TTBR1 top 32 bits */ + c2_TTBCR, /* Translation Table Base Control R. */ + c3_DACR, /* Domain Access Control Register */ + c5_DFSR, /* Data Fault Status Register */ + c5_IFSR, /* Instruction Fault Status Register */ + c5_ADFSR, /* Auxilary Data Fault Status R */ + c5_AIFSR, /* Auxilary Instrunction Fault Status R */ + c6_DFAR, /* Data Fault Address Register */ + c6_IFAR, /* Instruction Fault Address Register */ + c7_PAR, /* Physical Address Register */ + c7_PAR_high, /* PAR top 32 bits */ + c9_L2CTLR, /* Cortex A15/A7 L2 Control Register */ + c10_PRRR, /* Primary Region Remap Register */ + c10_NMRR, /* Normal Memory Remap Register */ + c12_VBAR, /* Vector Base Address Register */ + c13_CID, /* Context ID Register */ + c13_TID_URW, /* Thread ID, User R/W */ + c13_TID_URO, /* Thread ID, User R/O */ + c13_TID_PRIV, /* Thread ID, Privileged */ + c14_CNTKCTL, /* Timer Control Register (PL1) */ + c10_AMAIR0, /* Auxilary Memory Attribute Indirection Reg0 */ + c10_AMAIR1, /* Auxilary Memory Attribute Indirection Reg1 */ + NR_CP15_REGS /* Number of regs (incl. invalid) */ +}; + +struct kvm_cpu_context { + struct kvm_regs gp_regs; + struct vfp_hard_struct vfp; + u32 cp15[NR_CP15_REGS]; +}; + +typedef struct kvm_cpu_context kvm_cpu_context_t; struct kvm_vcpu_arch { - struct kvm_regs regs; + struct kvm_cpu_context ctxt; int target; /* Processor target */ DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES); - /* System control coprocessor (cp15) */ - u32 cp15[NR_CP15_REGS]; - /* The CPU type we expose to the VM */ u32 midr; @@ -111,9 +152,6 @@ struct kvm_vcpu_arch { /* Exception Information */ struct kvm_vcpu_fault_info fault; - /* Floating point registers (VFP and Advanced SIMD/NEON) */ - struct vfp_hard_struct vfp_guest; - /* Host FP context */ kvm_cpu_context_t *host_cpu_context; @@ -158,12 +196,14 @@ struct kvm_vcpu_stat { u64 exits; }; +#define vcpu_cp15(v,r) (v)->arch.ctxt.cp15[r] + int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init); unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); -u64 kvm_call_hyp(void *hypfn, ...); +unsigned long kvm_call_hyp(void *hypfn, ...); void force_vm_exit(const cpumask_t *mask); #define KVM_ARCH_WANT_MMU_NOTIFIER @@ -220,6 +260,11 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr, kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); } +static inline void __cpu_init_stage2(void) +{ + kvm_call_hyp(__init_stage2_translation); +} + static inline int kvm_arch_dev_ioctl_check_extension(long ext) { return 0; @@ -242,5 +287,20 @@ static inline void kvm_arm_init_debug(void) {} static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {} +static inline int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} +static inline int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} +static inline int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h new file mode 100644 index 000000000000..f0e860761380 --- /dev/null +++ b/arch/arm/include/asm/kvm_hyp.h @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2015 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ARM_KVM_HYP_H__ +#define __ARM_KVM_HYP_H__ + +#include <linux/compiler.h> +#include <linux/kvm_host.h> +#include <asm/kvm_mmu.h> +#include <asm/vfp.h> + +#define __hyp_text __section(.hyp.text) notrace + +#define kern_hyp_va(v) (v) +#define hyp_kern_va(v) (v) + +#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \ + "mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32 +#define __ACCESS_CP15_64(Op1, CRm) \ + "mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64 +#define __ACCESS_VFP(CRn) \ + "mrc", "mcr", __stringify(p10, 7, %0, CRn, cr0, 0), u32 + +#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v))) +#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__) + +#define __read_sysreg(r, w, c, t) ({ \ + t __val; \ + asm volatile(r " " c : "=r" (__val)); \ + __val; \ +}) +#define read_sysreg(...) __read_sysreg(__VA_ARGS__) + +#define write_special(v, r) \ + asm volatile("msr " __stringify(r) ", %0" : : "r" (v)) +#define read_special(r) ({ \ + u32 __val; \ + asm volatile("mrs %0, " __stringify(r) : "=r" (__val)); \ + __val; \ +}) + +#define TTBR0 __ACCESS_CP15_64(0, c2) +#define TTBR1 __ACCESS_CP15_64(1, c2) +#define VTTBR __ACCESS_CP15_64(6, c2) +#define PAR __ACCESS_CP15_64(0, c7) +#define CNTV_CVAL __ACCESS_CP15_64(3, c14) +#define CNTVOFF __ACCESS_CP15_64(4, c14) + +#define MIDR __ACCESS_CP15(c0, 0, c0, 0) +#define CSSELR __ACCESS_CP15(c0, 2, c0, 0) +#define VPIDR __ACCESS_CP15(c0, 4, c0, 0) +#define VMPIDR __ACCESS_CP15(c0, 4, c0, 5) +#define SCTLR __ACCESS_CP15(c1, 0, c0, 0) +#define CPACR __ACCESS_CP15(c1, 0, c0, 2) +#define HCR __ACCESS_CP15(c1, 4, c1, 0) +#define HDCR __ACCESS_CP15(c1, 4, c1, 1) +#define HCPTR __ACCESS_CP15(c1, 4, c1, 2) +#define HSTR __ACCESS_CP15(c1, 4, c1, 3) +#define TTBCR __ACCESS_CP15(c2, 0, c0, 2) +#define HTCR __ACCESS_CP15(c2, 4, c0, 2) +#define VTCR __ACCESS_CP15(c2, 4, c1, 2) +#define DACR __ACCESS_CP15(c3, 0, c0, 0) +#define DFSR __ACCESS_CP15(c5, 0, c0, 0) +#define IFSR __ACCESS_CP15(c5, 0, c0, 1) +#define ADFSR __ACCESS_CP15(c5, 0, c1, 0) +#define AIFSR __ACCESS_CP15(c5, 0, c1, 1) +#define HSR __ACCESS_CP15(c5, 4, c2, 0) +#define DFAR __ACCESS_CP15(c6, 0, c0, 0) +#define IFAR __ACCESS_CP15(c6, 0, c0, 2) +#define HDFAR __ACCESS_CP15(c6, 4, c0, 0) +#define HIFAR __ACCESS_CP15(c6, 4, c0, 2) +#define HPFAR __ACCESS_CP15(c6, 4, c0, 4) +#define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0) +#define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0) +#define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0) +#define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4) +#define PRRR __ACCESS_CP15(c10, 0, c2, 0) +#define NMRR __ACCESS_CP15(c10, 0, c2, 1) +#define AMAIR0 __ACCESS_CP15(c10, 0, c3, 0) +#define AMAIR1 __ACCESS_CP15(c10, 0, c3, 1) +#define VBAR __ACCESS_CP15(c12, 0, c0, 0) +#define CID __ACCESS_CP15(c13, 0, c0, 1) +#define TID_URW __ACCESS_CP15(c13, 0, c0, 2) +#define TID_URO __ACCESS_CP15(c13, 0, c0, 3) +#define TID_PRIV __ACCESS_CP15(c13, 0, c0, 4) +#define HTPIDR __ACCESS_CP15(c13, 4, c0, 2) +#define CNTKCTL __ACCESS_CP15(c14, 0, c1, 0) +#define CNTV_CTL __ACCESS_CP15(c14, 0, c3, 1) +#define CNTHCTL __ACCESS_CP15(c14, 4, c1, 0) + +#define VFP_FPEXC __ACCESS_VFP(FPEXC) + +/* AArch64 compatibility macros, only for the timer so far */ +#define read_sysreg_el0(r) read_sysreg(r##_el0) +#define write_sysreg_el0(v, r) write_sysreg(v, r##_el0) + +#define cntv_ctl_el0 CNTV_CTL +#define cntv_cval_el0 CNTV_CVAL +#define cntvoff_el2 CNTVOFF +#define cnthctl_el2 CNTHCTL + +void __timer_save_state(struct kvm_vcpu *vcpu); +void __timer_restore_state(struct kvm_vcpu *vcpu); + +void __vgic_v2_save_state(struct kvm_vcpu *vcpu); +void __vgic_v2_restore_state(struct kvm_vcpu *vcpu); + +void __sysreg_save_state(struct kvm_cpu_context *ctxt); +void __sysreg_restore_state(struct kvm_cpu_context *ctxt); + +void asmlinkage __vfp_save_state(struct vfp_hard_struct *vfp); +void asmlinkage __vfp_restore_state(struct vfp_hard_struct *vfp); +static inline bool __vfp_enabled(void) +{ + return !(read_sysreg(HCPTR) & (HCPTR_TCP(11) | HCPTR_TCP(10))); +} + +void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt); +void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt); + +int asmlinkage __guest_enter(struct kvm_vcpu *vcpu, + struct kvm_cpu_context *host); +int asmlinkage __hyp_do_panic(const char *, int, u32); + +#endif /* __ARM_KVM_HYP_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index a520b7987a29..da44be9db4fa 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -179,7 +179,7 @@ struct kvm; static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu) { - return (vcpu->arch.cp15[c1_SCTLR] & 0b101) == 0b101; + return (vcpu_cp15(vcpu, c1_SCTLR) & 0b101) == 0b101; } static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index c79b57bf71c4..9427fd632552 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -134,6 +134,21 @@ */ #define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) +#ifdef CONFIG_XIP_KERNEL +/* + * When referencing data in RAM from the XIP region in a relative manner + * with the MMU off, we need the relative offset between the two physical + * addresses. The macro below achieves this, which is: + * __pa(v_data) - __xip_pa(v_text) + */ +#define PHYS_RELATIVE(v_data, v_text) \ + (((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \ + ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \ + CONFIG_XIP_PHYS_ADDR)) +#else +#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text)) +#endif + #ifndef __ASSEMBLY__ /* @@ -273,14 +288,14 @@ static inline void *phys_to_virt(phys_addr_t x) #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x))) #define pfn_to_kaddr(pfn) __va((phys_addr_t)(pfn) << PAGE_SHIFT) -extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x); +extern unsigned long (*arch_virt_to_idmap)(unsigned long x); /* * These are for systems that have a hardware interconnect supported alias of * physical memory for idmap purposes. Most cases should leave these - * untouched. + * untouched. Note: this can only return addresses less than 4GiB. */ -static inline phys_addr_t __virt_to_idmap(unsigned long x) +static inline unsigned long __virt_to_idmap(unsigned long x) { if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap) return arch_virt_to_idmap(x); @@ -303,20 +318,6 @@ static inline phys_addr_t __virt_to_idmap(unsigned long x) #define __bus_to_pfn(x) __phys_to_pfn(x) #endif -#ifdef CONFIG_VIRT_TO_BUS -#define virt_to_bus virt_to_bus -static inline __deprecated unsigned long virt_to_bus(void *x) -{ - return __virt_to_bus((unsigned long)x); -} - -#define bus_to_virt bus_to_virt -static inline __deprecated void *bus_to_virt(unsigned long x) -{ - return (void *)__bus_to_virt(x); -} -#endif - /* * Conversion between a struct page and a physical address. * diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 432ce8176498..fa5b42d44985 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -26,7 +26,12 @@ void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); -#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; }) +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + atomic64_set(&mm->context.id, 0); + return 0; +} #ifdef CONFIG_ARM_ERRATA_798181 void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm, @@ -85,7 +90,12 @@ static inline void finish_arch_post_lock_switch(void) #endif /* CONFIG_MMU */ -#define init_new_context(tsk,mm) 0 +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + return 0; +} + #endif /* CONFIG_CPU_HAS_ASID */ diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h index d1b162a18dcb..503f488053de 100644 --- a/arch/arm/include/asm/page-nommu.h +++ b/arch/arm/include/asm/page-nommu.h @@ -17,9 +17,6 @@ #define KTHREAD_SIZE PAGE_SIZE #endif -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - #define clear_page(page) memset((page), 0, PAGE_SIZE) #define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index a5635444ca41..057d381f4e57 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -2,9 +2,6 @@ #define ASMARM_PCI_H #ifdef __KERNEL__ -#include <asm-generic/pci-dma-compat.h> -#include <asm-generic/pci-bridge.h> - #include <asm/mach/pci.h> /* for pci_sys_data */ extern unsigned long pcibios_min_io; @@ -41,5 +38,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) } #endif /* __KERNEL__ */ - #endif diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h new file mode 100644 index 000000000000..803bbf2b20b8 --- /dev/null +++ b/arch/arm/include/asm/sections.h @@ -0,0 +1,8 @@ +#ifndef _ASM_ARM_SECTIONS_H +#define _ASM_ARM_SECTIONS_H + +#include <asm-generic/sections.h> + +extern char _exiprom[]; + +#endif /* _ASM_ARM_SECTIONS_H */ diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h index 00098615c6f0..73e5e8513751 100644 --- a/arch/arm/include/asm/sparsemem.h +++ b/arch/arm/include/asm/sparsemem.h @@ -15,10 +15,11 @@ * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000, * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26. * - * Define these in your mach/memory.h. + * These can be overridden in your mach/memory.h. */ -#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS) -#error Sparsemem is not supported on this platform +#if !defined(MAX_PHYSMEM_BITS) || !defined(SECTION_SIZE_BITS) +#define MAX_PHYSMEM_BITS 36 +#define SECTION_SIZE_BITS 28 #endif #endif diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 4371f45c5784..d4ceaf5f299b 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -74,6 +74,15 @@ static inline bool is_hyp_mode_mismatched(void) { return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH); } + +static inline bool is_kernel_in_hyp_mode(void) +{ + return false; +} + +/* The section containing the hypervisor text */ +extern char __hyp_text_start[]; +extern char __hyp_text_end[]; #endif #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index d769972db8cb..b6b962d70db9 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -33,6 +33,8 @@ #ifndef _ASM_ARM_XEN_HYPERCALL_H #define _ASM_ARM_XEN_HYPERCALL_H +#include <linux/bug.h> + #include <xen/interface/xen.h> #include <xen/interface/sched.h> #include <xen/interface/platform.h> diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h index 0375c8caa061..9408a994cc91 100644 --- a/arch/arm/include/asm/xen/page-coherent.h +++ b/arch/arm/include/asm/xen/page-coherent.h @@ -35,14 +35,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page, dma_addr_t dev_addr, unsigned long offset, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page); + unsigned long page_pfn = page_to_xen_pfn(page); + unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr); + unsigned long compound_pages = + (1<<compound_order(page)) * XEN_PFN_PER_PAGE; + bool local = (page_pfn <= dev_pfn) && + (dev_pfn - page_pfn < compound_pages); + /* - * Dom0 is mapped 1:1, while the Linux page can be spanned accross - * multiple Xen page, it's not possible to have a mix of local and - * foreign Xen page. So if the first xen_pfn == mfn the page is local - * otherwise it's a foreign page grant-mapped in dom0. If the page is - * local we can safely call the native dma_ops function, otherwise we - * call the xen specific function. + * Dom0 is mapped 1:1, while the Linux page can span across + * multiple Xen pages, it's not possible for it to contain a + * mix of local and foreign Xen pages. So if the first xen_pfn + * == mfn the page is local otherwise it's a foreign page + * grant-mapped in dom0. If the page is local we can safely + * call the native dma_ops function, otherwise we call the xen + * specific function. */ if (local) __generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs); diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 43243be94cfc..d4ae3b8e2426 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -15,7 +15,7 @@ #define AT91_IO_P2V(x) (x) #endif -#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) +#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ @@ -24,7 +24,7 @@ .macro addruart, rp, rv, tmp ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address) - ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address) + ldr \rv, =AT91_DEBUG_UART_VIRT @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S index 619d8cc1ac12..92c44760d656 100644 --- a/arch/arm/include/debug/imx.S +++ b/arch/arm/include/debug/imx.S @@ -11,6 +11,7 @@ * */ +#include <asm/assembler.h> #include "imx-uart.h" /* @@ -34,6 +35,7 @@ .endm .macro senduart,rd,rx + ARM_BE8(rev \rd, \rd) str \rd, [\rx, #0x40] @ TXDATA .endm @@ -42,6 +44,7 @@ .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #0x98] @ SR2 + ARM_BE8(rev \rd, \rd) tst \rd, #1 << 3 @ TXDC beq 1002b @ wait until transmit done .endm diff --git a/arch/arm/include/debug/palmchip.S b/arch/arm/include/debug/palmchip.S new file mode 100644 index 000000000000..6824b2d1c38e --- /dev/null +++ b/arch/arm/include/debug/palmchip.S @@ -0,0 +1,11 @@ +#include <linux/serial_reg.h> + +#undef UART_TX +#undef UART_LSR +#undef UART_MSR + +#define UART_TX 1 +#define UART_LSR 7 +#define UART_MSR 8 + +#include <debug/8250.S> diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index de86b9247564..060cb5b49bfd 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -20,9 +20,9 @@ #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define UART0_PHYS 0xE0000000 -#define UART0_VIRT 0xF0000000 +#define UART0_VIRT 0xF0800000 #define UART1_PHYS 0xE0001000 -#define UART1_VIRT 0xF0001000 +#define UART1_VIRT 0xF0801000 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) # define LL_UART_PADDR UART1_PHYS diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index ede692ffa32e..5dd2528e9e45 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -417,6 +417,7 @@ #define __NR_userfaultfd (__NR_SYSCALL_BASE+388) #define __NR_membarrier (__NR_SYSCALL_BASE+389) #define __NR_mlock2 (__NR_SYSCALL_BASE+390) +#define __NR_copy_file_range (__NR_SYSCALL_BASE+391) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 2c5f160be65e..ad325a8c7e1e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o +AFLAGS_hyp-stub.o :=-Wa,-march=armv7-a ifeq ($(CONFIG_ARM_PSCI),y) obj-$(CONFIG_SMP) += psci_smp.o endif diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 871b8267d211..27d05813ff09 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -170,41 +170,11 @@ int main(void) DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); BLANK(); #ifdef CONFIG_KVM_ARM_HOST - DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm)); - DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr)); - DEFINE(VCPU_CP15, offsetof(struct kvm_vcpu, arch.cp15)); - DEFINE(VCPU_VFP_GUEST, offsetof(struct kvm_vcpu, arch.vfp_guest)); - DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.host_cpu_context)); - DEFINE(VCPU_REGS, offsetof(struct kvm_vcpu, arch.regs)); - DEFINE(VCPU_USR_REGS, offsetof(struct kvm_vcpu, arch.regs.usr_regs)); - DEFINE(VCPU_SVC_REGS, offsetof(struct kvm_vcpu, arch.regs.svc_regs)); - DEFINE(VCPU_ABT_REGS, offsetof(struct kvm_vcpu, arch.regs.abt_regs)); - DEFINE(VCPU_UND_REGS, offsetof(struct kvm_vcpu, arch.regs.und_regs)); - DEFINE(VCPU_IRQ_REGS, offsetof(struct kvm_vcpu, arch.regs.irq_regs)); - DEFINE(VCPU_FIQ_REGS, offsetof(struct kvm_vcpu, arch.regs.fiq_regs)); - DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc)); - DEFINE(VCPU_CPSR, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr)); - DEFINE(VCPU_HCR, offsetof(struct kvm_vcpu, arch.hcr)); - DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines)); - DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.fault.hsr)); - DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.fault.hxfar)); - DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.fault.hpfar)); - DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.fault.hyp_pc)); - DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); - DEFINE(VGIC_V2_CPU_HCR, offsetof(struct vgic_cpu, vgic_v2.vgic_hcr)); - DEFINE(VGIC_V2_CPU_VMCR, offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr)); - DEFINE(VGIC_V2_CPU_MISR, offsetof(struct vgic_cpu, vgic_v2.vgic_misr)); - DEFINE(VGIC_V2_CPU_EISR, offsetof(struct vgic_cpu, vgic_v2.vgic_eisr)); - DEFINE(VGIC_V2_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr)); - DEFINE(VGIC_V2_CPU_APR, offsetof(struct vgic_cpu, vgic_v2.vgic_apr)); - DEFINE(VGIC_V2_CPU_LR, offsetof(struct vgic_cpu, vgic_v2.vgic_lr)); - DEFINE(VGIC_CPU_NR_LR, offsetof(struct vgic_cpu, nr_lr)); - DEFINE(VCPU_TIMER_CNTV_CTL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl)); - DEFINE(VCPU_TIMER_CNTV_CVAL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_cval)); - DEFINE(KVM_TIMER_CNTVOFF, offsetof(struct kvm, arch.timer.cntvoff)); - DEFINE(KVM_TIMER_ENABLED, offsetof(struct kvm, arch.timer.enabled)); - DEFINE(KVM_VGIC_VCTRL, offsetof(struct kvm, arch.vgic.vctrl_base)); - DEFINE(KVM_VTTBR, offsetof(struct kvm, arch.vttbr)); + DEFINE(VCPU_GUEST_CTXT, offsetof(struct kvm_vcpu, arch.ctxt)); + DEFINE(VCPU_HOST_CTXT, offsetof(struct kvm_vcpu, arch.host_cpu_context)); + DEFINE(CPU_CTXT_VFP, offsetof(struct kvm_cpu_context, vfp)); + DEFINE(CPU_CTXT_GP_REGS, offsetof(struct kvm_cpu_context, gp_regs)); + DEFINE(GP_REGS_USR, offsetof(struct kvm_regs, usr_regs)); #endif BLANK(); #ifdef CONFIG_VDSO diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index ac368bb068d1..dfc7cd6851ad 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -400,6 +400,7 @@ CALL(sys_userfaultfd) CALL(sys_membarrier) CALL(sys_mlock2) + CALL(sys_copy_file_range) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3ce377f7251f..e2550500486d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -1064,7 +1064,6 @@ ENDPROC(vector_\name) .endm .section .stubs, "ax", %progbits -__stubs_start: @ This must be the first word .word vector_swi @@ -1202,14 +1201,13 @@ vector_addrexcptn: .long __fiq_svc @ e .long __fiq_svc @ f - .globl vector_fiq_offset - .equ vector_fiq_offset, vector_fiq + .globl vector_fiq .section .vectors, "ax", %progbits -__vectors_start: +.L__vectors_start: W(b) vector_rst W(b) vector_und - W(ldr) pc, __vectors_start + 0x1000 + W(ldr) pc, .L__vectors_start + 0x1000 W(b) vector_pabt W(b) vector_dabt W(b) vector_addrexcptn diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c index a71501ff6f18..b09561a6d06a 100644 --- a/arch/arm/kernel/hibernate.c +++ b/arch/arm/kernel/hibernate.c @@ -62,7 +62,7 @@ static int notrace arch_save_image(unsigned long unused) ret = swsusp_save(); if (ret == 0) - _soft_restart(virt_to_phys(cpu_resume), false); + _soft_restart(virt_to_idmap(cpu_resume), false); return ret; } @@ -87,7 +87,7 @@ static void notrace arch_restore_image(void *unused) for (pbe = restore_pblist; pbe; pbe = pbe->next) copy_page(pbe->orig_address, pbe->address); - _soft_restart(virt_to_phys(cpu_resume), false); + _soft_restart(virt_to_idmap(cpu_resume), false); } static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 2a55373f49bf..0b1e4a93d67e 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -17,6 +17,7 @@ */ #include <linux/init.h> +#include <linux/irqchip/arm-gic-v3.h> #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/virt.h> @@ -161,6 +162,29 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE 1: #endif +#ifdef CONFIG_ARM_GIC_V3 + @ Check whether GICv3 system registers are available + mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 + ubfx r7, r7, #28, #4 + cmp r7, #1 + bne 2f + + @ Enable system register accesses + mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE + orr r7, r7, #(ICC_SRE_EL2_ENABLE | ICC_SRE_EL2_SRE) + mcr p15, 4, r7, c12, c9, 5 @ ICC_HSRE + isb + + @ SRE bit could be forced to 0 by firmware. + @ Check whether it sticks before accessing any other sysreg + mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE + tst r7, #ICC_SRE_EL2_SRE + beq 2f + mov r7, #0 + mcr p15, 4, r7, c12, c11, 0 @ ICH_HCR +2: +#endif + bx lr @ The boot CPU mode is left in r4. ENDPROC(__hyp_stub_install_secondary) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 1d45320ee125..ece04a457486 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -95,7 +95,7 @@ void __init init_IRQ(void) outer_cache.write_sec = machine_desc->l2c_write_sec; ret = l2x0_of_init(machine_desc->l2c_aux_val, machine_desc->l2c_aux_mask); - if (ret) + if (ret && ret != -ENODEV) pr_err("L2C: failed to init: %d\n", ret); } diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 8bf3b7c09888..59fd0e24c56b 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -143,10 +143,8 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { - unsigned long page_list; - unsigned long reboot_code_buffer_phys; - unsigned long reboot_entry = (unsigned long)relocate_new_kernel; - unsigned long reboot_entry_phys; + unsigned long page_list, reboot_entry_phys; + void (*reboot_entry)(void); void *reboot_code_buffer; /* @@ -159,9 +157,6 @@ void machine_kexec(struct kimage *image) page_list = image->head & PAGE_MASK; - /* we need both effective and real address here */ - reboot_code_buffer_phys = - page_to_pfn(image->control_code_page) << PAGE_SHIFT; reboot_code_buffer = page_address(image->control_code_page); /* Prepare parameters for reboot_code_buffer*/ @@ -174,10 +169,11 @@ void machine_kexec(struct kimage *image) /* copy our kernel relocation code to the control code page */ reboot_entry = fncpy(reboot_code_buffer, - reboot_entry, + &relocate_new_kernel, relocate_new_kernel_size); - reboot_entry_phys = (unsigned long)reboot_entry + - (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer); + + /* get the identity mapping physical address for the reboot code */ + reboot_entry_phys = virt_to_idmap(reboot_entry); pr_info("Bye!\n"); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index efdddcb97dd1..4f14b5ce6535 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -34,7 +34,7 @@ * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ #undef MODULES_VADDR -#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK) +#define MODULES_VADDR (((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK) #endif #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4152158f6e6a..15063851cd10 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -712,6 +712,11 @@ static const struct attribute_group *armv7_pmuv2_attr_groups[] = { #define ARMV7_EXCLUDE_USER (1 << 30) #define ARMV7_INCLUDE_HYP (1 << 27) +/* + * Secure debug enable reg + */ +#define ARMV7_SDER_SUNIDEN BIT(1) /* Permit non-invasive debug */ + static inline u32 armv7_pmnc_read(void) { u32 val; @@ -1094,7 +1099,13 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event, static void armv7pmu_reset(void *info) { struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; - u32 idx, nb_cnt = cpu_pmu->num_events; + u32 idx, nb_cnt = cpu_pmu->num_events, val; + + if (cpu_pmu->secure_access) { + asm volatile("mrc p15, 0, %0, c1, c1, 1" : "=r" (val)); + val |= ARMV7_SDER_SUNIDEN; + asm volatile("mcr p15, 0, %0, c1, c1, 1" : : "r" (val)); + } /* The counter and interrupt enable registers are unknown at reset. */ for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c index 38269358fd25..71a2ff9ec490 100644 --- a/arch/arm/kernel/reboot.c +++ b/arch/arm/kernel/reboot.c @@ -50,7 +50,7 @@ static void __soft_restart(void *addr) flush_cache_all(); /* Switch to the identity mapping. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset); + phys_reset = (phys_reset_t)virt_to_idmap(cpu_reset); phys_reset((unsigned long)addr); /* Should never get here. */ diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7d0cba6f1cc5..139791ed473d 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -176,13 +176,13 @@ static struct resource mem_res[] = { .name = "Kernel code", .start = 0, .end = 0, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_SYSTEM_RAM }, { .name = "Kernel data", .start = 0, .end = 0, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_SYSTEM_RAM } }; @@ -851,7 +851,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) res->name = "System RAM"; res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; request_resource(&iomem_resource, res); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 37312f6749f3..baee70267f29 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -409,7 +409,7 @@ asmlinkage void secondary_start_kernel(void) /* * OK, it's off to the idle thread for us */ - cpu_startup_entry(CPUHP_ONLINE); + cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); } void __init smp_cpus_done(unsigned int max_cpus) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 08b7847bf912..ec279d161b32 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -40,7 +40,7 @@ * to run the rebalance_domains for all idle cores and the cpu_capacity can be * updated during this sequence. */ -static DEFINE_PER_CPU(unsigned long, cpu_scale); +static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE; unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu) { @@ -306,8 +306,6 @@ void __init init_cpu_topology(void) cpu_topo->socket_id = -1; cpumask_clear(&cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); - - set_capacity_scale(cpu, SCHED_CAPACITY_SCALE); } smp_wmb(); diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S new file mode 100644 index 000000000000..cba1ec899a69 --- /dev/null +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -0,0 +1,316 @@ +/* ld script to make ARM Linux kernel + * taken from the i386 version by Russell King + * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> + */ + +#include <asm-generic/vmlinux.lds.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/memory.h> +#include <asm/page.h> + +#define PROC_INFO \ + . = ALIGN(4); \ + VMLINUX_SYMBOL(__proc_info_begin) = .; \ + *(.proc.info.init) \ + VMLINUX_SYMBOL(__proc_info_end) = .; + +#define IDMAP_TEXT \ + ALIGN_FUNCTION(); \ + VMLINUX_SYMBOL(__idmap_text_start) = .; \ + *(.idmap.text) \ + VMLINUX_SYMBOL(__idmap_text_end) = .; \ + . = ALIGN(PAGE_SIZE); \ + VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ + *(.hyp.idmap.text) \ + VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; + +#ifdef CONFIG_HOTPLUG_CPU +#define ARM_CPU_DISCARD(x) +#define ARM_CPU_KEEP(x) x +#else +#define ARM_CPU_DISCARD(x) x +#define ARM_CPU_KEEP(x) +#endif + +#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \ + defined(CONFIG_GENERIC_BUG) +#define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) +#else +#define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x +#endif + +OUTPUT_ARCH(arm) +ENTRY(stext) + +#ifndef __ARMEB__ +jiffies = jiffies_64; +#else +jiffies = jiffies_64 + 4; +#endif + +SECTIONS +{ + /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * + * unwind exit sections must be discarded before the rest of the + * unwind sections get included. + */ + /DISCARD/ : { + *(.ARM.exidx.exit.text) + *(.ARM.extab.exit.text) + ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) + ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL +#ifndef CONFIG_MMU + *(.text.fixup) + *(__ex_table) +#endif +#ifndef CONFIG_SMP_ON_UP + *(.alt.smp.init) +#endif + *(.discard) + *(.discard.*) + } + + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); + _xiprom = .; /* XIP ROM area to be mapped */ + + .head.text : { + _text = .; + HEAD_TEXT + } + + .text : { /* Real text segment */ + _stext = .; /* Text and read-only data */ + IDMAP_TEXT + __exception_text_start = .; + *(.exception.text) + __exception_text_end = .; + IRQENTRY_TEXT + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.gnu.warning) + *(.glue_7) + *(.glue_7t) + . = ALIGN(4); + *(.got) /* Global offset table */ + ARM_CPU_KEEP(PROC_INFO) + } + + RO_DATA(PAGE_SIZE) + + . = ALIGN(4); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; +#ifdef CONFIG_MMU + *(__ex_table) +#endif + __stop___ex_table = .; + } + +#ifdef CONFIG_ARM_UNWIND + /* + * Stack unwinding tables + */ + . = ALIGN(8); + .ARM.unwind_idx : { + __start_unwind_idx = .; + *(.ARM.exidx*) + __stop_unwind_idx = .; + } + .ARM.unwind_tab : { + __start_unwind_tab = .; + *(.ARM.extab*) + __stop_unwind_tab = .; + } +#endif + + NOTES + + _etext = .; /* End of text and rodata section */ + + /* + * The vectors and stubs are relocatable code, and the + * only thing that matters is their relative offsets + */ + __vectors_start = .; + .vectors 0xffff0000 : AT(__vectors_start) { + *(.vectors) + } + . = __vectors_start + SIZEOF(.vectors); + __vectors_end = .; + + __stubs_start = .; + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { + *(.stubs) + } + . = __stubs_start + SIZEOF(.stubs); + __stubs_end = .; + + PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors)); + + INIT_TEXT_SECTION(8) + .exit.text : { + ARM_EXIT_KEEP(EXIT_TEXT) + } + .init.proc.info : { + ARM_CPU_DISCARD(PROC_INFO) + } + .init.arch.info : { + __arch_info_begin = .; + *(.arch.info.init) + __arch_info_end = .; + } + .init.tagtable : { + __tagtable_begin = .; + *(.taglist.init) + __tagtable_end = .; + } +#ifdef CONFIG_SMP_ON_UP + .init.smpalt : { + __smpalt_begin = .; + *(.alt.smp.init) + __smpalt_end = .; + } +#endif + .init.pv_table : { + __pv_table_begin = .; + *(.pv_table) + __pv_table_end = .; + } + .init.data : { + INIT_SETUP(16) + INIT_CALLS + CON_INITCALL + SECURITY_INITCALL + INIT_RAM_FS + } + +#ifdef CONFIG_SMP + PERCPU_SECTION(L1_CACHE_BYTES) +#endif + + _exiprom = .; /* End of XIP ROM area */ + __data_loc = ALIGN(4); /* location in binary */ + . = PAGE_OFFSET + TEXT_OFFSET; + + .data : AT(__data_loc) { + _data = .; /* address in memory */ + _sdata = .; + + /* + * first, the init task union, aligned + * to an 8192 byte boundary. + */ + INIT_TASK_DATA(THREAD_SIZE) + + . = ALIGN(PAGE_SIZE); + __init_begin = .; + INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) + . = ALIGN(PAGE_SIZE); + __init_end = .; + + NOSAVE_DATA + CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) + READ_MOSTLY_DATA(L1_CACHE_BYTES) + + /* + * and the usual data section + */ + DATA_DATA + CONSTRUCTORS + + _edata = .; + } + _edata_loc = __data_loc + SIZEOF(.data); + +#ifdef CONFIG_HAVE_TCM + /* + * We align everything to a page boundary so we can + * free it after init has commenced and TCM contents have + * been copied to its destination. + */ + .tcm_start : { + . = ALIGN(PAGE_SIZE); + __tcm_start = .; + __itcm_start = .; + } + + /* + * Link these to the ITCM RAM + * Put VMA to the TCM address and LMA to the common RAM + * and we'll upload the contents from RAM to TCM and free + * the used RAM after that. + */ + .text_itcm ITCM_OFFSET : AT(__itcm_start) + { + __sitcm_text = .; + *(.tcm.text) + *(.tcm.rodata) + . = ALIGN(4); + __eitcm_text = .; + } + + /* + * Reset the dot pointer, this is needed to create the + * relative __dtcm_start below (to be used as extern in code). + */ + . = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm); + + .dtcm_start : { + __dtcm_start = .; + } + + /* TODO: add remainder of ITCM as well, that can be used for data! */ + .data_dtcm DTCM_OFFSET : AT(__dtcm_start) + { + . = ALIGN(4); + __sdtcm_data = .; + *(.tcm.data) + . = ALIGN(4); + __edtcm_data = .; + } + + /* Reset the dot pointer or the linker gets confused */ + . = ADDR(.dtcm_start) + SIZEOF(.data_dtcm); + + /* End marker for freeing TCM copy in linked object */ + .tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){ + . = ALIGN(PAGE_SIZE); + __tcm_end = .; + } +#endif + + BSS_SECTION(0, 0, 0) + _end = .; + + STABS_DEBUG +} + +/* + * These must never be empty + * If you have to comment these two assert statements out, your + * binutils is too old (for other reasons as well) + */ +ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") +ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") + +/* + * The HYP init code can't be more than a page long, + * and should not cross a page boundary. + * The above comment applies as well. + */ +ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, + "HYP init code too big or misaligned") diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 8b60fde5ce48..e2c6da096cef 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -3,14 +3,16 @@ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> */ +#ifdef CONFIG_XIP_KERNEL +#include "vmlinux-xip.lds.S" +#else + #include <asm-generic/vmlinux.lds.h> #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/page.h> -#ifdef CONFIG_ARM_KERNMEM_PERMS #include <asm/pgtable.h> -#endif #define PROC_INFO \ . = ALIGN(4); \ @@ -18,6 +20,11 @@ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; +#define HYPERVISOR_TEXT \ + VMLINUX_SYMBOL(__hyp_text_start) = .; \ + *(.hyp.text) \ + VMLINUX_SYMBOL(__hyp_text_end) = .; + #define IDMAP_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__idmap_text_start) = .; \ @@ -84,17 +91,13 @@ SECTIONS *(.discard.*) } -#ifdef CONFIG_XIP_KERNEL - . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); -#else . = PAGE_OFFSET + TEXT_OFFSET; -#endif .head.text : { _text = .; HEAD_TEXT } -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); #endif @@ -105,9 +108,11 @@ SECTIONS *(.exception.text) __exception_text_end = .; IRQENTRY_TEXT + SOFTIRQENTRY_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT + HYPERVISOR_TEXT KPROBES_TEXT *(.gnu.warning) *(.glue_7) @@ -117,7 +122,7 @@ SECTIONS ARM_CPU_KEEP(PROC_INFO) } -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_DEBUG_ALIGN_RODATA . = ALIGN(1<<SECTION_SHIFT); #endif RO_DATA(PAGE_SIZE) @@ -152,32 +157,33 @@ SECTIONS _etext = .; /* End of text and rodata section */ -#ifndef CONFIG_XIP_KERNEL -# ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); -# else +#else . = ALIGN(PAGE_SIZE); -# endif - __init_begin = .; #endif + __init_begin = .; + /* * The vectors and stubs are relocatable code, and the * only thing that matters is their relative offsets */ __vectors_start = .; - .vectors 0 : AT(__vectors_start) { + .vectors 0xffff0000 : AT(__vectors_start) { *(.vectors) } . = __vectors_start + SIZEOF(.vectors); __vectors_end = .; __stubs_start = .; - .stubs 0x1000 : AT(__stubs_start) { + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { *(.stubs) } . = __stubs_start + SIZEOF(.stubs); __stubs_end = .; + PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors)); + INIT_TEXT_SECTION(8) .exit.text : { ARM_EXIT_KEEP(EXIT_TEXT) @@ -208,37 +214,28 @@ SECTIONS __pv_table_end = .; } .init.data : { -#ifndef CONFIG_XIP_KERNEL INIT_DATA -#endif INIT_SETUP(16) INIT_CALLS CON_INITCALL SECURITY_INITCALL INIT_RAM_FS } -#ifndef CONFIG_XIP_KERNEL .exit.data : { ARM_EXIT_KEEP(EXIT_DATA) } -#endif #ifdef CONFIG_SMP PERCPU_SECTION(L1_CACHE_BYTES) #endif -#ifdef CONFIG_XIP_KERNEL - __data_loc = ALIGN(4); /* location in binary */ - . = PAGE_OFFSET + TEXT_OFFSET; -#else -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); #else . = ALIGN(THREAD_SIZE); #endif __init_end = .; __data_loc = .; -#endif .data : AT(__data_loc) { _data = .; /* address in memory */ @@ -250,15 +247,6 @@ SECTIONS */ INIT_TASK_DATA(THREAD_SIZE) -#ifdef CONFIG_XIP_KERNEL - . = ALIGN(PAGE_SIZE); - __init_begin = .; - INIT_DATA - ARM_EXIT_KEEP(EXIT_DATA) - . = ALIGN(PAGE_SIZE); - __init_end = .; -#endif - NOSAVE_DATA CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) READ_MOSTLY_DATA(L1_CACHE_BYTES) @@ -336,6 +324,15 @@ SECTIONS STABS_DEBUG } +#ifdef CONFIG_DEBUG_RODATA +/* + * Without CONFIG_DEBUG_ALIGN_RODATA, __start_rodata_section_aligned will + * be the first section-aligned location after __start_rodata. Otherwise, + * it will be equal to __start_rodata. + */ +__start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT); +#endif + /* * These must never be empty * If you have to comment these two assert statements out, your @@ -351,3 +348,5 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") */ ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, "HYP init code too big or misaligned") + +#endif /* CONFIG_XIP_KERNEL */ diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index c5eef02c52ba..eb1bf4309c13 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -17,6 +17,7 @@ AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) KVM := ../../../virt/kvm kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o +obj-$(CONFIG_KVM_ARM_HOST) += hyp/ obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index dda1959f0dde..6accd66d26f0 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -28,6 +28,7 @@ #include <linux/sched.h> #include <linux/kvm.h> #include <trace/events/kvm.h> +#include <kvm/arm_pmu.h> #define CREATE_TRACE_POINTS #include "trace.h" @@ -265,6 +266,7 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) kvm_mmu_free_memory_caches(vcpu); kvm_timer_vcpu_terminate(vcpu); kvm_vgic_vcpu_destroy(vcpu); + kvm_pmu_vcpu_destroy(vcpu); kmem_cache_free(kvm_vcpu_cache, vcpu); } @@ -320,6 +322,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) vcpu->cpu = -1; kvm_arm_set_running_vcpu(NULL); + kvm_timer_vcpu_put(vcpu); } int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, @@ -370,7 +373,9 @@ static void exit_vm_noop(void *info) void force_vm_exit(const cpumask_t *mask) { + preempt_disable(); smp_call_function_many(mask, exit_vm_noop, NULL, true); + preempt_enable(); } /** @@ -506,18 +511,18 @@ static void kvm_arm_resume_guest(struct kvm *kvm) struct kvm_vcpu *vcpu; kvm_for_each_vcpu(i, vcpu, kvm) { - wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu); vcpu->arch.pause = false; - wake_up_interruptible(wq); + swake_up(wq); } } static void vcpu_sleep(struct kvm_vcpu *vcpu) { - wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu); - wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && + swait_event_interruptible(*wq, ((!vcpu->arch.power_off) && (!vcpu->arch.pause))); } @@ -577,6 +582,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) * non-preemptible context. */ preempt_disable(); + kvm_pmu_flush_hwstate(vcpu); kvm_timer_flush_hwstate(vcpu); kvm_vgic_flush_hwstate(vcpu); @@ -593,6 +599,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || vcpu->arch.power_off || vcpu->arch.pause) { local_irq_enable(); + kvm_pmu_sync_hwstate(vcpu); kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); preempt_enable(); @@ -642,10 +649,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); /* - * We must sync the timer state before the vgic state so that - * the vgic can properly sample the updated state of the + * We must sync the PMU and timer state before the vgic state so + * that the vgic can properly sample the updated state of the * interrupt line. */ + kvm_pmu_sync_hwstate(vcpu); kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); @@ -823,11 +831,54 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu, return 0; } +static int kvm_arm_vcpu_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_set_attr(vcpu, attr); + break; + } + + return ret; +} + +static int kvm_arm_vcpu_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_get_attr(vcpu, attr); + break; + } + + return ret; +} + +static int kvm_arm_vcpu_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_has_attr(vcpu, attr); + break; + } + + return ret; +} + long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { struct kvm_vcpu *vcpu = filp->private_data; void __user *argp = (void __user *)arg; + struct kvm_device_attr attr; switch (ioctl) { case KVM_ARM_VCPU_INIT: { @@ -870,6 +921,21 @@ long kvm_arch_vcpu_ioctl(struct file *filp, return -E2BIG; return kvm_arm_copy_reg_indices(vcpu, user_list->reg); } + case KVM_SET_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_set_attr(vcpu, &attr); + } + case KVM_GET_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_get_attr(vcpu, &attr); + } + case KVM_HAS_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_has_attr(vcpu, &attr); + } default: return -EINVAL; } @@ -967,6 +1033,11 @@ long kvm_arch_vm_ioctl(struct file *filp, } } +static void cpu_init_stage2(void *dummy) +{ + __cpu_init_stage2(); +} + static void cpu_init_hyp_mode(void *dummy) { phys_addr_t boot_pgd_ptr; @@ -982,9 +1053,10 @@ static void cpu_init_hyp_mode(void *dummy) pgd_ptr = kvm_mmu_get_httbr(); stack_page = __this_cpu_read(kvm_arm_hyp_stack_page); hyp_stack_ptr = stack_page + PAGE_SIZE; - vector_ptr = (unsigned long)__kvm_hyp_vector; + vector_ptr = (unsigned long)kvm_ksym_ref(__kvm_hyp_vector); __cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr); + __cpu_init_stage2(); kvm_arm_init_debug(); } @@ -1035,6 +1107,82 @@ static inline void hyp_cpu_pm_init(void) } #endif +static void teardown_common_resources(void) +{ + free_percpu(kvm_host_cpu_state); +} + +static int init_common_resources(void) +{ + kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t); + if (!kvm_host_cpu_state) { + kvm_err("Cannot allocate host CPU state\n"); + return -ENOMEM; + } + + return 0; +} + +static int init_subsystems(void) +{ + int err; + + /* + * Init HYP view of VGIC + */ + err = kvm_vgic_hyp_init(); + switch (err) { + case 0: + vgic_present = true; + break; + case -ENODEV: + case -ENXIO: + vgic_present = false; + break; + default: + return err; + } + + /* + * Init HYP architected timer support + */ + err = kvm_timer_hyp_init(); + if (err) + return err; + + kvm_perf_init(); + kvm_coproc_table_init(); + + return 0; +} + +static void teardown_hyp_mode(void) +{ + int cpu; + + if (is_kernel_in_hyp_mode()) + return; + + free_hyp_pgds(); + for_each_possible_cpu(cpu) + free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); +} + +static int init_vhe_mode(void) +{ + /* + * Execute the init code on each CPU. + */ + on_each_cpu(cpu_init_stage2, NULL, 1); + + /* set size of VMID supported by CPU */ + kvm_vmid_bits = kvm_get_vmid_bits(); + kvm_info("%d-bit VMID\n", kvm_vmid_bits); + + kvm_info("VHE mode initialized successfully\n"); + return 0; +} + /** * Inits Hyp-mode on all online CPUs */ @@ -1065,7 +1213,7 @@ static int init_hyp_mode(void) stack_page = __get_free_page(GFP_KERNEL); if (!stack_page) { err = -ENOMEM; - goto out_free_stack_pages; + goto out_err; } per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page; @@ -1074,16 +1222,18 @@ static int init_hyp_mode(void) /* * Map the Hyp-code called directly from the host */ - err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end); + err = create_hyp_mappings(kvm_ksym_ref(__hyp_text_start), + kvm_ksym_ref(__hyp_text_end)); if (err) { kvm_err("Cannot map world-switch code\n"); - goto out_free_mappings; + goto out_err; } - err = create_hyp_mappings(__start_rodata, __end_rodata); + err = create_hyp_mappings(kvm_ksym_ref(__start_rodata), + kvm_ksym_ref(__end_rodata)); if (err) { kvm_err("Cannot map rodata section\n"); - goto out_free_mappings; + goto out_err; } /* @@ -1095,20 +1245,10 @@ static int init_hyp_mode(void) if (err) { kvm_err("Cannot map hyp stack\n"); - goto out_free_mappings; + goto out_err; } } - /* - * Map the host CPU structures - */ - kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t); - if (!kvm_host_cpu_state) { - err = -ENOMEM; - kvm_err("Cannot allocate host CPU state\n"); - goto out_free_mappings; - } - for_each_possible_cpu(cpu) { kvm_cpu_context_t *cpu_ctxt; @@ -1117,7 +1257,7 @@ static int init_hyp_mode(void) if (err) { kvm_err("Cannot map host CPU state: %d\n", err); - goto out_free_context; + goto out_err; } } @@ -1126,34 +1266,22 @@ static int init_hyp_mode(void) */ on_each_cpu(cpu_init_hyp_mode, NULL, 1); - /* - * Init HYP view of VGIC - */ - err = kvm_vgic_hyp_init(); - switch (err) { - case 0: - vgic_present = true; - break; - case -ENODEV: - case -ENXIO: - vgic_present = false; - break; - default: - goto out_free_context; - } - - /* - * Init HYP architected timer support - */ - err = kvm_timer_hyp_init(); - if (err) - goto out_free_context; - #ifndef CONFIG_HOTPLUG_CPU free_boot_hyp_pgd(); #endif - kvm_perf_init(); + cpu_notifier_register_begin(); + + err = __register_cpu_notifier(&hyp_init_cpu_nb); + + cpu_notifier_register_done(); + + if (err) { + kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); + goto out_err; + } + + hyp_cpu_pm_init(); /* set size of VMID supported by CPU */ kvm_vmid_bits = kvm_get_vmid_bits(); @@ -1162,14 +1290,9 @@ static int init_hyp_mode(void) kvm_info("Hyp mode initialized successfully\n"); return 0; -out_free_context: - free_percpu(kvm_host_cpu_state); -out_free_mappings: - free_hyp_pgds(); -out_free_stack_pages: - for_each_possible_cpu(cpu) - free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); + out_err: + teardown_hyp_mode(); kvm_err("error initializing Hyp mode: %d\n", err); return err; } @@ -1213,26 +1336,27 @@ int kvm_arch_init(void *opaque) } } - cpu_notifier_register_begin(); - - err = init_hyp_mode(); + err = init_common_resources(); if (err) - goto out_err; + return err; - err = __register_cpu_notifier(&hyp_init_cpu_nb); - if (err) { - kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); + if (is_kernel_in_hyp_mode()) + err = init_vhe_mode(); + else + err = init_hyp_mode(); + if (err) goto out_err; - } - - cpu_notifier_register_done(); - hyp_cpu_pm_init(); + err = init_subsystems(); + if (err) + goto out_hyp; - kvm_coproc_table_init(); return 0; + +out_hyp: + teardown_hyp_mode(); out_err: - cpu_notifier_register_done(); + teardown_common_resources(); return err; } diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index f3d88dc388bc..1bb2b79c01ff 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -16,6 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +#include <linux/bsearch.h> #include <linux/mm.h> #include <linux/kvm_host.h> #include <linux/uaccess.h> @@ -54,8 +56,8 @@ static inline void vcpu_cp15_reg64_set(struct kvm_vcpu *vcpu, const struct coproc_reg *r, u64 val) { - vcpu->arch.cp15[r->reg] = val & 0xffffffff; - vcpu->arch.cp15[r->reg + 1] = val >> 32; + vcpu_cp15(vcpu, r->reg) = val & 0xffffffff; + vcpu_cp15(vcpu, r->reg + 1) = val >> 32; } static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, @@ -63,9 +65,9 @@ static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, { u64 val; - val = vcpu->arch.cp15[r->reg + 1]; + val = vcpu_cp15(vcpu, r->reg + 1); val = val << 32; - val = val | vcpu->arch.cp15[r->reg]; + val = val | vcpu_cp15(vcpu, r->reg); return val; } @@ -104,7 +106,7 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) * vcpu_id, but we read the 'U' bit from the underlying * hardware directly. */ - vcpu->arch.cp15[c0_MPIDR] = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) | + vcpu_cp15(vcpu, c0_MPIDR) = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) | ((vcpu->vcpu_id >> 2) << MPIDR_LEVEL_BITS) | (vcpu->vcpu_id & 3)); } @@ -117,7 +119,7 @@ static bool access_actlr(struct kvm_vcpu *vcpu, if (p->is_write) return ignore_write(vcpu, p); - *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR]; + *vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c1_ACTLR); return true; } @@ -139,7 +141,7 @@ static bool access_l2ctlr(struct kvm_vcpu *vcpu, if (p->is_write) return ignore_write(vcpu, p); - *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR]; + *vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c9_L2CTLR); return true; } @@ -156,7 +158,7 @@ static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) ncores = min(ncores, 3U); l2ctlr |= (ncores & 3) << 24; - vcpu->arch.cp15[c9_L2CTLR] = l2ctlr; + vcpu_cp15(vcpu, c9_L2CTLR) = l2ctlr; } static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) @@ -171,7 +173,7 @@ static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) else actlr &= ~(1U << 6); - vcpu->arch.cp15[c1_ACTLR] = actlr; + vcpu_cp15(vcpu, c1_ACTLR) = actlr; } /* @@ -218,9 +220,9 @@ bool access_vm_reg(struct kvm_vcpu *vcpu, BUG_ON(!p->is_write); - vcpu->arch.cp15[r->reg] = *vcpu_reg(vcpu, p->Rt1); + vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt1); if (p->is_64bit) - vcpu->arch.cp15[r->reg + 1] = *vcpu_reg(vcpu, p->Rt2); + vcpu_cp15(vcpu, r->reg + 1) = *vcpu_reg(vcpu, p->Rt2); kvm_toggle_cache(vcpu, was_enabled); return true; @@ -381,17 +383,26 @@ static const struct coproc_reg cp15_regs[] = { { CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar}, }; +static int check_reg_table(const struct coproc_reg *table, unsigned int n) +{ + unsigned int i; + + for (i = 1; i < n; i++) { + if (cmp_reg(&table[i-1], &table[i]) >= 0) { + kvm_err("reg table %p out of order (%d)\n", table, i - 1); + return 1; + } + } + + return 0; +} + /* Target specific emulation tables */ static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS]; void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table) { - unsigned int i; - - for (i = 1; i < table->num; i++) - BUG_ON(cmp_reg(&table->table[i-1], - &table->table[i]) >= 0); - + BUG_ON(check_reg_table(table->table, table->num)); target_tables[table->target] = table; } @@ -405,29 +416,32 @@ static const struct coproc_reg *get_target_table(unsigned target, size_t *num) return table->table; } +#define reg_to_match_value(x) \ + ({ \ + unsigned long val; \ + val = (x)->CRn << 11; \ + val |= (x)->CRm << 7; \ + val |= (x)->Op1 << 4; \ + val |= (x)->Op2 << 1; \ + val |= !(x)->is_64bit; \ + val; \ + }) + +static int match_reg(const void *key, const void *elt) +{ + const unsigned long pval = (unsigned long)key; + const struct coproc_reg *r = elt; + + return pval - reg_to_match_value(r); +} + static const struct coproc_reg *find_reg(const struct coproc_params *params, const struct coproc_reg table[], unsigned int num) { - unsigned int i; - - for (i = 0; i < num; i++) { - const struct coproc_reg *r = &table[i]; - - if (params->is_64bit != r->is_64) - continue; - if (params->CRn != r->CRn) - continue; - if (params->CRm != r->CRm) - continue; - if (params->Op1 != r->Op1) - continue; - if (params->Op2 != r->Op2) - continue; + unsigned long pval = reg_to_match_value(params); - return r; - } - return NULL; + return bsearch((void *)pval, table, num, sizeof(table[0]), match_reg); } static int emulate_cp15(struct kvm_vcpu *vcpu, @@ -645,6 +659,9 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 0), Op1( 0), Op2( 3), is32, NULL, get_TLBTR }, { CRn( 0), CRm( 0), Op1( 0), Op2( 6), is32, NULL, get_REVIDR }, + { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR }, + { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 0), is32, NULL, get_ID_PFR0 }, { CRn( 0), CRm( 1), Op1( 0), Op2( 1), is32, NULL, get_ID_PFR1 }, { CRn( 0), CRm( 1), Op1( 0), Op2( 2), is32, NULL, get_ID_DFR0 }, @@ -660,9 +677,6 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 2), Op1( 0), Op2( 3), is32, NULL, get_ID_ISAR3 }, { CRn( 0), CRm( 2), Op1( 0), Op2( 4), is32, NULL, get_ID_ISAR4 }, { CRn( 0), CRm( 2), Op1( 0), Op2( 5), is32, NULL, get_ID_ISAR5 }, - - { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR }, - { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, }; /* @@ -901,7 +915,7 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) if (vfpid < num_fp_regs()) { if (KVM_REG_SIZE(id) != 8) return -ENOENT; - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid], + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpregs[vfpid], id); } @@ -911,13 +925,13 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) switch (vfpid) { case KVM_REG_ARM_VFP_FPEXC: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpexc, id); case KVM_REG_ARM_VFP_FPSCR: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpscr, id); case KVM_REG_ARM_VFP_FPINST: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst, id); case KVM_REG_ARM_VFP_FPINST2: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst2, id); case KVM_REG_ARM_VFP_MVFR0: val = fmrx(MVFR0); return reg_to_user(uaddr, &val, id); @@ -945,7 +959,7 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) if (vfpid < num_fp_regs()) { if (KVM_REG_SIZE(id) != 8) return -ENOENT; - return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid], + return reg_from_user(&vcpu->arch.ctxt.vfp.fpregs[vfpid], uaddr, id); } @@ -955,13 +969,13 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) switch (vfpid) { case KVM_REG_ARM_VFP_FPEXC: - return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpexc, uaddr, id); case KVM_REG_ARM_VFP_FPSCR: - return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpscr, uaddr, id); case KVM_REG_ARM_VFP_FPINST: - return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst, uaddr, id); case KVM_REG_ARM_VFP_FPINST2: - return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst2, uaddr, id); /* These are invariant. */ case KVM_REG_ARM_VFP_MVFR0: if (reg_from_user(&val, uaddr, id)) @@ -1030,7 +1044,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) val = vcpu_cp15_reg64_get(vcpu, r); ret = reg_to_user(uaddr, &val, reg->id); } else if (KVM_REG_SIZE(reg->id) == 4) { - ret = reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); + ret = reg_to_user(uaddr, &vcpu_cp15(vcpu, r->reg), reg->id); } return ret; @@ -1060,7 +1074,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) if (!ret) vcpu_cp15_reg64_set(vcpu, r, val); } else if (KVM_REG_SIZE(reg->id) == 4) { - ret = reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); + ret = reg_from_user(&vcpu_cp15(vcpu, r->reg), uaddr, reg->id); } return ret; @@ -1096,7 +1110,7 @@ static int write_demux_regids(u64 __user *uindices) static u64 cp15_to_index(const struct coproc_reg *reg) { u64 val = KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT); - if (reg->is_64) { + if (reg->is_64bit) { val |= KVM_REG_SIZE_U64; val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); /* @@ -1210,8 +1224,8 @@ void kvm_coproc_table_init(void) unsigned int i; /* Make sure tables are unique and in order. */ - for (i = 1; i < ARRAY_SIZE(cp15_regs); i++) - BUG_ON(cmp_reg(&cp15_regs[i-1], &cp15_regs[i]) >= 0); + BUG_ON(check_reg_table(cp15_regs, ARRAY_SIZE(cp15_regs))); + BUG_ON(check_reg_table(invariant_cp15, ARRAY_SIZE(invariant_cp15))); /* We abuse the reset function to overwrite the table itself. */ for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++) @@ -1248,7 +1262,7 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) const struct coproc_reg *table; /* Catch someone adding a register without putting in reset entry. */ - memset(vcpu->arch.cp15, 0x42, sizeof(vcpu->arch.cp15)); + memset(vcpu->arch.ctxt.cp15, 0x42, sizeof(vcpu->arch.ctxt.cp15)); /* Generic chip reset first (so target could override). */ reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs)); @@ -1257,6 +1271,6 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) reset_coproc_regs(vcpu, table, num); for (num = 1; num < NR_CP15_REGS; num++) - if (vcpu->arch.cp15[num] == 0x42424242) - panic("Didn't reset vcpu->arch.cp15[%zi]", num); + if (vcpu_cp15(vcpu, num) == 0x42424242) + panic("Didn't reset vcpu_cp15(vcpu, %zi)", num); } diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h index 88d24a3a9778..eef1759c2b65 100644 --- a/arch/arm/kvm/coproc.h +++ b/arch/arm/kvm/coproc.h @@ -37,7 +37,7 @@ struct coproc_reg { unsigned long Op1; unsigned long Op2; - bool is_64; + bool is_64bit; /* Trapped access from guest, if non-NULL. */ bool (*access)(struct kvm_vcpu *, @@ -47,7 +47,7 @@ struct coproc_reg { /* Initialization for vcpu. */ void (*reset)(struct kvm_vcpu *, const struct coproc_reg *); - /* Index into vcpu->arch.cp15[], or 0 if we don't need to save it. */ + /* Index into vcpu_cp15(vcpu, ...), or 0 if we don't need to save it. */ unsigned long reg; /* Value (usually reset value) */ @@ -104,25 +104,25 @@ static inline void reset_unknown(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15)); - vcpu->arch.cp15[r->reg] = 0xdecafbad; + BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); + vcpu_cp15(vcpu, r->reg) = 0xdecafbad; } static inline void reset_val(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15)); - vcpu->arch.cp15[r->reg] = r->val; + BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); + vcpu_cp15(vcpu, r->reg) = r->val; } static inline void reset_unknown64(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.cp15)); + BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); - vcpu->arch.cp15[r->reg] = 0xdecafbad; - vcpu->arch.cp15[r->reg+1] = 0xd0c0ffee; + vcpu_cp15(vcpu, r->reg) = 0xdecafbad; + vcpu_cp15(vcpu, r->reg+1) = 0xd0c0ffee; } static inline int cmp_reg(const struct coproc_reg *i1, @@ -141,7 +141,7 @@ static inline int cmp_reg(const struct coproc_reg *i1, return i1->Op1 - i2->Op1; if (i1->Op2 != i2->Op2) return i1->Op2 - i2->Op2; - return i2->is_64 - i1->is_64; + return i2->is_64bit - i1->is_64bit; } @@ -150,8 +150,8 @@ static inline int cmp_reg(const struct coproc_reg *i1, #define CRm64(_x) .CRn = _x, .CRm = 0 #define Op1(_x) .Op1 = _x #define Op2(_x) .Op2 = _x -#define is64 .is_64 = true -#define is32 .is_64 = false +#define is64 .is_64bit = true +#define is32 .is_64bit = false bool access_vm_reg(struct kvm_vcpu *vcpu, const struct coproc_params *p, diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index dc99159857b4..a494def3f195 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -112,7 +112,7 @@ static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = { */ unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) { - unsigned long *reg_array = (unsigned long *)&vcpu->arch.regs; + unsigned long *reg_array = (unsigned long *)&vcpu->arch.ctxt.gp_regs; unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { @@ -147,15 +147,15 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu) unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { case SVC_MODE: - return &vcpu->arch.regs.KVM_ARM_SVC_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_SVC_spsr; case ABT_MODE: - return &vcpu->arch.regs.KVM_ARM_ABT_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_ABT_spsr; case UND_MODE: - return &vcpu->arch.regs.KVM_ARM_UND_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_UND_spsr; case IRQ_MODE: - return &vcpu->arch.regs.KVM_ARM_IRQ_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_IRQ_spsr; case FIQ_MODE: - return &vcpu->arch.regs.KVM_ARM_FIQ_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_FIQ_spsr; default: BUG(); } @@ -266,8 +266,8 @@ void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr) static u32 exc_vector_base(struct kvm_vcpu *vcpu) { - u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; - u32 vbar = vcpu->arch.cp15[c12_VBAR]; + u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); + u32 vbar = vcpu_cp15(vcpu, c12_VBAR); if (sctlr & SCTLR_V) return 0xffff0000; @@ -282,7 +282,7 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu) static void kvm_update_psr(struct kvm_vcpu *vcpu, unsigned long mode) { unsigned long cpsr = *vcpu_cpsr(vcpu); - u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; + u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | mode; @@ -357,22 +357,22 @@ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) if (is_pabt) { /* Set IFAR and IFSR */ - vcpu->arch.cp15[c6_IFAR] = addr; - is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31); + vcpu_cp15(vcpu, c6_IFAR) = addr; + is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); /* Always give debug fault for now - should give guest a clue */ if (is_lpae) - vcpu->arch.cp15[c5_IFSR] = 1 << 9 | 0x22; + vcpu_cp15(vcpu, c5_IFSR) = 1 << 9 | 0x22; else - vcpu->arch.cp15[c5_IFSR] = 2; + vcpu_cp15(vcpu, c5_IFSR) = 2; } else { /* !iabt */ /* Set DFAR and DFSR */ - vcpu->arch.cp15[c6_DFAR] = addr; - is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31); + vcpu_cp15(vcpu, c6_DFAR) = addr; + is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); /* Always give debug fault for now - should give guest a clue */ if (is_lpae) - vcpu->arch.cp15[c5_DFSR] = 1 << 9 | 0x22; + vcpu_cp15(vcpu, c5_DFSR) = 1 << 9 | 0x22; else - vcpu->arch.cp15[c5_DFSR] = 2; + vcpu_cp15(vcpu, c5_DFSR) = 2; } } diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 5fa69d7bae58..9093ed0f8b2a 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -25,7 +25,6 @@ #include <asm/cputype.h> #include <asm/uaccess.h> #include <asm/kvm.h> -#include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> #include <asm/kvm_coproc.h> @@ -55,7 +54,7 @@ static u64 core_reg_offset_from_id(u64 id) static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { u32 __user *uaddr = (u32 __user *)(long)reg->addr; - struct kvm_regs *regs = &vcpu->arch.regs; + struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs; u64 off; if (KVM_REG_SIZE(reg->id) != 4) @@ -72,7 +71,7 @@ static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { u32 __user *uaddr = (u32 __user *)(long)reg->addr; - struct kvm_regs *regs = &vcpu->arch.regs; + struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs; u64 off, val; if (KVM_REG_SIZE(reg->id) != 4) @@ -161,7 +160,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) u64 val; val = kvm_arm_timer_get_reg(vcpu, reg->id); - return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)); + return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0; } static unsigned long num_core_regs(void) diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 3ede90d8b20b..3f1ef0dbc899 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -147,13 +147,6 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, switch (exception_index) { case ARM_EXCEPTION_IRQ: return 1; - case ARM_EXCEPTION_UNDEFINED: - kvm_err("Undefined exception in Hyp mode at: %#08lx\n", - kvm_vcpu_get_hyp_pc(vcpu)); - BUG(); - panic("KVM: Hypervisor undefined exception!\n"); - case ARM_EXCEPTION_DATA_ABORT: - case ARM_EXCEPTION_PREF_ABORT: case ARM_EXCEPTION_HVC: /* * See ARM ARM B1.14.1: "Hyp traps on instructions diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile new file mode 100644 index 000000000000..8dfa5f7f9290 --- /dev/null +++ b/arch/arm/kvm/hyp/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for Kernel-based Virtual Machine module, HYP part +# + +KVM=../../../../virt/kvm + +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o + +obj-$(CONFIG_KVM_ARM_HOST) += tlb.o +obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += vfp.o +obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += entry.o +obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o +obj-$(CONFIG_KVM_ARM_HOST) += switch.o +obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o diff --git a/arch/arm/kvm/hyp/banked-sr.c b/arch/arm/kvm/hyp/banked-sr.c new file mode 100644 index 000000000000..111bda8cdebd --- /dev/null +++ b/arch/arm/kvm/hyp/banked-sr.c @@ -0,0 +1,77 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +__asm__(".arch_extension virt"); + +void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt) +{ + ctxt->gp_regs.usr_regs.ARM_sp = read_special(SP_usr); + ctxt->gp_regs.usr_regs.ARM_pc = read_special(ELR_hyp); + ctxt->gp_regs.usr_regs.ARM_cpsr = read_special(SPSR); + ctxt->gp_regs.KVM_ARM_SVC_sp = read_special(SP_svc); + ctxt->gp_regs.KVM_ARM_SVC_lr = read_special(LR_svc); + ctxt->gp_regs.KVM_ARM_SVC_spsr = read_special(SPSR_svc); + ctxt->gp_regs.KVM_ARM_ABT_sp = read_special(SP_abt); + ctxt->gp_regs.KVM_ARM_ABT_lr = read_special(LR_abt); + ctxt->gp_regs.KVM_ARM_ABT_spsr = read_special(SPSR_abt); + ctxt->gp_regs.KVM_ARM_UND_sp = read_special(SP_und); + ctxt->gp_regs.KVM_ARM_UND_lr = read_special(LR_und); + ctxt->gp_regs.KVM_ARM_UND_spsr = read_special(SPSR_und); + ctxt->gp_regs.KVM_ARM_IRQ_sp = read_special(SP_irq); + ctxt->gp_regs.KVM_ARM_IRQ_lr = read_special(LR_irq); + ctxt->gp_regs.KVM_ARM_IRQ_spsr = read_special(SPSR_irq); + ctxt->gp_regs.KVM_ARM_FIQ_r8 = read_special(R8_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_r9 = read_special(R9_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_r10 = read_special(R10_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_fp = read_special(R11_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_ip = read_special(R12_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_sp = read_special(SP_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_lr = read_special(LR_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_spsr = read_special(SPSR_fiq); +} + +void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt) +{ + write_special(ctxt->gp_regs.usr_regs.ARM_sp, SP_usr); + write_special(ctxt->gp_regs.usr_regs.ARM_pc, ELR_hyp); + write_special(ctxt->gp_regs.usr_regs.ARM_cpsr, SPSR_cxsf); + write_special(ctxt->gp_regs.KVM_ARM_SVC_sp, SP_svc); + write_special(ctxt->gp_regs.KVM_ARM_SVC_lr, LR_svc); + write_special(ctxt->gp_regs.KVM_ARM_SVC_spsr, SPSR_svc); + write_special(ctxt->gp_regs.KVM_ARM_ABT_sp, SP_abt); + write_special(ctxt->gp_regs.KVM_ARM_ABT_lr, LR_abt); + write_special(ctxt->gp_regs.KVM_ARM_ABT_spsr, SPSR_abt); + write_special(ctxt->gp_regs.KVM_ARM_UND_sp, SP_und); + write_special(ctxt->gp_regs.KVM_ARM_UND_lr, LR_und); + write_special(ctxt->gp_regs.KVM_ARM_UND_spsr, SPSR_und); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_sp, SP_irq); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_lr, LR_irq); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_spsr, SPSR_irq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r8, R8_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r9, R9_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r10, R10_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_fp, R11_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_ip, R12_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_sp, SP_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_lr, LR_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_spsr, SPSR_fiq); +} diff --git a/arch/arm/kvm/hyp/cp15-sr.c b/arch/arm/kvm/hyp/cp15-sr.c new file mode 100644 index 000000000000..c4782812714c --- /dev/null +++ b/arch/arm/kvm/hyp/cp15-sr.c @@ -0,0 +1,84 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +static u64 *cp15_64(struct kvm_cpu_context *ctxt, int idx) +{ + return (u64 *)(ctxt->cp15 + idx); +} + +void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt) +{ + ctxt->cp15[c0_MPIDR] = read_sysreg(VMPIDR); + ctxt->cp15[c0_CSSELR] = read_sysreg(CSSELR); + ctxt->cp15[c1_SCTLR] = read_sysreg(SCTLR); + ctxt->cp15[c1_CPACR] = read_sysreg(CPACR); + *cp15_64(ctxt, c2_TTBR0) = read_sysreg(TTBR0); + *cp15_64(ctxt, c2_TTBR1) = read_sysreg(TTBR1); + ctxt->cp15[c2_TTBCR] = read_sysreg(TTBCR); + ctxt->cp15[c3_DACR] = read_sysreg(DACR); + ctxt->cp15[c5_DFSR] = read_sysreg(DFSR); + ctxt->cp15[c5_IFSR] = read_sysreg(IFSR); + ctxt->cp15[c5_ADFSR] = read_sysreg(ADFSR); + ctxt->cp15[c5_AIFSR] = read_sysreg(AIFSR); + ctxt->cp15[c6_DFAR] = read_sysreg(DFAR); + ctxt->cp15[c6_IFAR] = read_sysreg(IFAR); + *cp15_64(ctxt, c7_PAR) = read_sysreg(PAR); + ctxt->cp15[c10_PRRR] = read_sysreg(PRRR); + ctxt->cp15[c10_NMRR] = read_sysreg(NMRR); + ctxt->cp15[c10_AMAIR0] = read_sysreg(AMAIR0); + ctxt->cp15[c10_AMAIR1] = read_sysreg(AMAIR1); + ctxt->cp15[c12_VBAR] = read_sysreg(VBAR); + ctxt->cp15[c13_CID] = read_sysreg(CID); + ctxt->cp15[c13_TID_URW] = read_sysreg(TID_URW); + ctxt->cp15[c13_TID_URO] = read_sysreg(TID_URO); + ctxt->cp15[c13_TID_PRIV] = read_sysreg(TID_PRIV); + ctxt->cp15[c14_CNTKCTL] = read_sysreg(CNTKCTL); +} + +void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt) +{ + write_sysreg(ctxt->cp15[c0_MPIDR], VMPIDR); + write_sysreg(ctxt->cp15[c0_CSSELR], CSSELR); + write_sysreg(ctxt->cp15[c1_SCTLR], SCTLR); + write_sysreg(ctxt->cp15[c1_CPACR], CPACR); + write_sysreg(*cp15_64(ctxt, c2_TTBR0), TTBR0); + write_sysreg(*cp15_64(ctxt, c2_TTBR1), TTBR1); + write_sysreg(ctxt->cp15[c2_TTBCR], TTBCR); + write_sysreg(ctxt->cp15[c3_DACR], DACR); + write_sysreg(ctxt->cp15[c5_DFSR], DFSR); + write_sysreg(ctxt->cp15[c5_IFSR], IFSR); + write_sysreg(ctxt->cp15[c5_ADFSR], ADFSR); + write_sysreg(ctxt->cp15[c5_AIFSR], AIFSR); + write_sysreg(ctxt->cp15[c6_DFAR], DFAR); + write_sysreg(ctxt->cp15[c6_IFAR], IFAR); + write_sysreg(*cp15_64(ctxt, c7_PAR), PAR); + write_sysreg(ctxt->cp15[c10_PRRR], PRRR); + write_sysreg(ctxt->cp15[c10_NMRR], NMRR); + write_sysreg(ctxt->cp15[c10_AMAIR0], AMAIR0); + write_sysreg(ctxt->cp15[c10_AMAIR1], AMAIR1); + write_sysreg(ctxt->cp15[c12_VBAR], VBAR); + write_sysreg(ctxt->cp15[c13_CID], CID); + write_sysreg(ctxt->cp15[c13_TID_URW], TID_URW); + write_sysreg(ctxt->cp15[c13_TID_URO], TID_URO); + write_sysreg(ctxt->cp15[c13_TID_PRIV], TID_PRIV); + write_sysreg(ctxt->cp15[c14_CNTKCTL], CNTKCTL); +} diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S new file mode 100644 index 000000000000..21c238871c9e --- /dev/null +++ b/arch/arm/kvm/hyp/entry.S @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2016 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/kvm_arm.h> + + .arch_extension virt + + .text + .pushsection .hyp.text, "ax" + +#define USR_REGS_OFFSET (CPU_CTXT_GP_REGS + GP_REGS_USR) + +/* int __guest_enter(struct kvm_vcpu *vcpu, struct kvm_cpu_context *host) */ +ENTRY(__guest_enter) + @ Save host registers + add r1, r1, #(USR_REGS_OFFSET + S_R4) + stm r1!, {r4-r12} + str lr, [r1, #4] @ Skip SP_usr (already saved) + + @ Restore guest registers + add r0, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0) + ldr lr, [r0, #S_LR] + ldm r0, {r0-r12} + + clrex + eret +ENDPROC(__guest_enter) + +ENTRY(__guest_exit) + /* + * return convention: + * guest r0, r1, r2 saved on the stack + * r0: vcpu pointer + * r1: exception code + */ + + add r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R3) + stm r2!, {r3-r12} + str lr, [r2, #4] + add r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0) + pop {r3, r4, r5} @ r0, r1, r2 + stm r2, {r3-r5} + + ldr r0, [r0, #VCPU_HOST_CTXT] + add r0, r0, #(USR_REGS_OFFSET + S_R4) + ldm r0!, {r4-r12} + ldr lr, [r0, #4] + + mov r0, r1 + bx lr +ENDPROC(__guest_exit) + +/* + * If VFPv3 support is not available, then we will not switch the VFP + * registers; however cp10 and cp11 accesses will still trap and fallback + * to the regular coprocessor emulation code, which currently will + * inject an undefined exception to the guest. + */ +#ifdef CONFIG_VFPv3 +ENTRY(__vfp_guest_restore) + push {r3, r4, lr} + + @ NEON/VFP used. Turn on VFP access. + mrc p15, 4, r1, c1, c1, 2 @ HCPTR + bic r1, r1, #(HCPTR_TCP(10) | HCPTR_TCP(11)) + mcr p15, 4, r1, c1, c1, 2 @ HCPTR + isb + + @ Switch VFP/NEON hardware state to the guest's + mov r4, r0 + ldr r0, [r0, #VCPU_HOST_CTXT] + add r0, r0, #CPU_CTXT_VFP + bl __vfp_save_state + add r0, r4, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP) + bl __vfp_restore_state + + pop {r3, r4, lr} + pop {r0, r1, r2} + clrex + eret +ENDPROC(__vfp_guest_restore) +#endif + + .popsection + diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S new file mode 100644 index 000000000000..78091383a5d9 --- /dev/null +++ b/arch/arm/kvm/hyp/hyp-entry.S @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/linkage.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_asm.h> + + .arch_extension virt + + .text + .pushsection .hyp.text, "ax" + +.macro load_vcpu reg + mrc p15, 4, \reg, c13, c0, 2 @ HTPIDR +.endm + +/******************************************************************** + * Hypervisor exception vector and handlers + * + * + * The KVM/ARM Hypervisor ABI is defined as follows: + * + * Entry to Hyp mode from the host kernel will happen _only_ when an HVC + * instruction is issued since all traps are disabled when running the host + * kernel as per the Hyp-mode initialization at boot time. + * + * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc + * below) when the HVC instruction is called from SVC mode (i.e. a guest or the + * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC + * instructions are called from within Hyp-mode. + * + * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): + * Switching to Hyp mode is done through a simple HVC #0 instruction. The + * exception vector code will check that the HVC comes from VMID==0. + * - r0 contains a pointer to a HYP function + * - r1, r2, and r3 contain arguments to the above function. + * - The HYP function will be called with its arguments in r0, r1 and r2. + * On HYP function return, we return directly to SVC. + * + * Note that the above is used to execute code in Hyp-mode from a host-kernel + * point of view, and is a different concept from performing a world-switch and + * executing guest code SVC mode (with a VMID != 0). + */ + + .align 5 +__kvm_hyp_vector: + .global __kvm_hyp_vector + + @ Hyp-mode exception vector + W(b) hyp_reset + W(b) hyp_undef + W(b) hyp_svc + W(b) hyp_pabt + W(b) hyp_dabt + W(b) hyp_hvc + W(b) hyp_irq + W(b) hyp_fiq + +.macro invalid_vector label, cause + .align +\label: mov r0, #\cause + b __hyp_panic +.endm + + invalid_vector hyp_reset ARM_EXCEPTION_RESET + invalid_vector hyp_undef ARM_EXCEPTION_UNDEFINED + invalid_vector hyp_svc ARM_EXCEPTION_SOFTWARE + invalid_vector hyp_pabt ARM_EXCEPTION_PREF_ABORT + invalid_vector hyp_dabt ARM_EXCEPTION_DATA_ABORT + invalid_vector hyp_fiq ARM_EXCEPTION_FIQ + +ENTRY(__hyp_do_panic) + mrs lr, cpsr + bic lr, lr, #MODE_MASK + orr lr, lr, #SVC_MODE +THUMB( orr lr, lr, #PSR_T_BIT ) + msr spsr_cxsf, lr + ldr lr, =panic + msr ELR_hyp, lr + ldr lr, =kvm_call_hyp + clrex + eret +ENDPROC(__hyp_do_panic) + +hyp_hvc: + /* + * Getting here is either because of a trap from a guest, + * or from executing HVC from the host kernel, which means + * "do something in Hyp mode". + */ + push {r0, r1, r2} + + @ Check syndrome register + mrc p15, 4, r1, c5, c2, 0 @ HSR + lsr r0, r1, #HSR_EC_SHIFT + cmp r0, #HSR_EC_HVC + bne guest_trap @ Not HVC instr. + + /* + * Let's check if the HVC came from VMID 0 and allow simple + * switch to Hyp mode + */ + mrrc p15, 6, r0, r2, c2 + lsr r2, r2, #16 + and r2, r2, #0xff + cmp r2, #0 + bne guest_trap @ Guest called HVC + + /* + * Getting here means host called HVC, we shift parameters and branch + * to Hyp function. + */ + pop {r0, r1, r2} + + /* Check for __hyp_get_vectors */ + cmp r0, #-1 + mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR + beq 1f + + push {lr} + + mov lr, r0 + mov r0, r1 + mov r1, r2 + mov r2, r3 + +THUMB( orr lr, #1) + blx lr @ Call the HYP function + + pop {lr} +1: eret + +guest_trap: + load_vcpu r0 @ Load VCPU pointer to r0 + +#ifdef CONFIG_VFPv3 + @ Check for a VFP access + lsr r1, r1, #HSR_EC_SHIFT + cmp r1, #HSR_EC_CP_0_13 + beq __vfp_guest_restore +#endif + + mov r1, #ARM_EXCEPTION_HVC + b __guest_exit + +hyp_irq: + push {r0, r1, r2} + mov r1, #ARM_EXCEPTION_IRQ + load_vcpu r0 @ Load VCPU pointer to r0 + b __guest_exit + + .ltorg + + .popsection diff --git a/arch/arm/kvm/hyp/s2-setup.c b/arch/arm/kvm/hyp/s2-setup.c new file mode 100644 index 000000000000..7be39af2ed6c --- /dev/null +++ b/arch/arm/kvm/hyp/s2-setup.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2016 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/types.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_hyp.h> + +void __hyp_text __init_stage2_translation(void) +{ + u64 val; + + val = read_sysreg(VTCR) & ~VTCR_MASK; + + val |= read_sysreg(HTCR) & VTCR_HTCR_SH; + val |= KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S; + + write_sysreg(val, VTCR); +} diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c new file mode 100644 index 000000000000..b13caa90cd44 --- /dev/null +++ b/arch/arm/kvm/hyp/switch.c @@ -0,0 +1,232 @@ +/* + * Copyright (C) 2015 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_asm.h> +#include <asm/kvm_hyp.h> + +__asm__(".arch_extension virt"); + +/* + * Activate the traps, saving the host's fpexc register before + * overwriting it. We'll restore it on VM exit. + */ +static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host) +{ + u32 val; + + /* + * We are about to set HCPTR.TCP10/11 to trap all floating point + * register accesses to HYP, however, the ARM ARM clearly states that + * traps are only taken to HYP if the operation would not otherwise + * trap to SVC. Therefore, always make sure that for 32-bit guests, + * we set FPEXC.EN to prevent traps to SVC, when setting the TCP bits. + */ + val = read_sysreg(VFP_FPEXC); + *fpexc_host = val; + if (!(val & FPEXC_EN)) { + write_sysreg(val | FPEXC_EN, VFP_FPEXC); + isb(); + } + + write_sysreg(vcpu->arch.hcr | vcpu->arch.irq_lines, HCR); + /* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */ + write_sysreg(HSTR_T(15), HSTR); + write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR); + val = read_sysreg(HDCR); + write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR); +} + +static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) +{ + u32 val; + + write_sysreg(0, HCR); + write_sysreg(0, HSTR); + val = read_sysreg(HDCR); + write_sysreg(val & ~(HDCR_TPM | HDCR_TPMCR), HDCR); + write_sysreg(0, HCPTR); +} + +static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(vcpu->kvm); + write_sysreg(kvm->arch.vttbr, VTTBR); + write_sysreg(vcpu->arch.midr, VPIDR); +} + +static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu) +{ + write_sysreg(0, VTTBR); + write_sysreg(read_sysreg(MIDR), VPIDR); +} + +static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu) +{ + __vgic_v2_save_state(vcpu); +} + +static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu) +{ + __vgic_v2_restore_state(vcpu); +} + +static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) +{ + u32 hsr = read_sysreg(HSR); + u8 ec = hsr >> HSR_EC_SHIFT; + u32 hpfar, far; + + vcpu->arch.fault.hsr = hsr; + + if (ec == HSR_EC_IABT) + far = read_sysreg(HIFAR); + else if (ec == HSR_EC_DABT) + far = read_sysreg(HDFAR); + else + return true; + + /* + * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: + * + * Abort on the stage 2 translation for a memory access from a + * Non-secure PL1 or PL0 mode: + * + * For any Access flag fault or Translation fault, and also for any + * Permission fault on the stage 2 translation of a memory access + * made as part of a translation table walk for a stage 1 translation, + * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR + * is UNKNOWN. + */ + if (!(hsr & HSR_DABT_S1PTW) && (hsr & HSR_FSC_TYPE) == FSC_PERM) { + u64 par, tmp; + + par = read_sysreg(PAR); + write_sysreg(far, ATS1CPR); + isb(); + + tmp = read_sysreg(PAR); + write_sysreg(par, PAR); + + if (unlikely(tmp & 1)) + return false; /* Translation failed, back to guest */ + + hpfar = ((tmp >> 12) & ((1UL << 28) - 1)) << 4; + } else { + hpfar = read_sysreg(HPFAR); + } + + vcpu->arch.fault.hxfar = far; + vcpu->arch.fault.hpfar = hpfar; + return true; +} + +static int __hyp_text __guest_run(struct kvm_vcpu *vcpu) +{ + struct kvm_cpu_context *host_ctxt; + struct kvm_cpu_context *guest_ctxt; + bool fp_enabled; + u64 exit_code; + u32 fpexc; + + vcpu = kern_hyp_va(vcpu); + write_sysreg(vcpu, HTPIDR); + + host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + guest_ctxt = &vcpu->arch.ctxt; + + __sysreg_save_state(host_ctxt); + __banked_save_state(host_ctxt); + + __activate_traps(vcpu, &fpexc); + __activate_vm(vcpu); + + __vgic_restore_state(vcpu); + __timer_restore_state(vcpu); + + __sysreg_restore_state(guest_ctxt); + __banked_restore_state(guest_ctxt); + + /* Jump in the fire! */ +again: + exit_code = __guest_enter(vcpu, host_ctxt); + /* And we're baaack! */ + + if (exit_code == ARM_EXCEPTION_HVC && !__populate_fault_info(vcpu)) + goto again; + + fp_enabled = __vfp_enabled(); + + __banked_save_state(guest_ctxt); + __sysreg_save_state(guest_ctxt); + __timer_save_state(vcpu); + __vgic_save_state(vcpu); + + __deactivate_traps(vcpu); + __deactivate_vm(vcpu); + + __banked_restore_state(host_ctxt); + __sysreg_restore_state(host_ctxt); + + if (fp_enabled) { + __vfp_save_state(&guest_ctxt->vfp); + __vfp_restore_state(&host_ctxt->vfp); + } + + write_sysreg(fpexc, VFP_FPEXC); + + return exit_code; +} + +__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu); + +static const char * const __hyp_panic_string[] = { + [ARM_EXCEPTION_RESET] = "\nHYP panic: RST PC:%08x CPSR:%08x", + [ARM_EXCEPTION_UNDEFINED] = "\nHYP panic: UNDEF PC:%08x CPSR:%08x", + [ARM_EXCEPTION_SOFTWARE] = "\nHYP panic: SVC PC:%08x CPSR:%08x", + [ARM_EXCEPTION_PREF_ABORT] = "\nHYP panic: PABRT PC:%08x CPSR:%08x", + [ARM_EXCEPTION_DATA_ABORT] = "\nHYP panic: DABRT PC:%08x ADDR:%08x", + [ARM_EXCEPTION_IRQ] = "\nHYP panic: IRQ PC:%08x CPSR:%08x", + [ARM_EXCEPTION_FIQ] = "\nHYP panic: FIQ PC:%08x CPSR:%08x", + [ARM_EXCEPTION_HVC] = "\nHYP panic: HVC PC:%08x CPSR:%08x", +}; + +void __hyp_text __noreturn __hyp_panic(int cause) +{ + u32 elr = read_special(ELR_hyp); + u32 val; + + if (cause == ARM_EXCEPTION_DATA_ABORT) + val = read_sysreg(HDFAR); + else + val = read_special(SPSR); + + if (read_sysreg(VTTBR)) { + struct kvm_vcpu *vcpu; + struct kvm_cpu_context *host_ctxt; + + vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR); + host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + __deactivate_traps(vcpu); + __deactivate_vm(vcpu); + __sysreg_restore_state(host_ctxt); + } + + /* Call panic for real */ + __hyp_do_panic(__hyp_panic_string[cause], elr, val); + + unreachable(); +} diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c new file mode 100644 index 000000000000..a2636001e616 --- /dev/null +++ b/arch/arm/kvm/hyp/tlb.c @@ -0,0 +1,70 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +/** + * Flush per-VMID TLBs + * + * __kvm_tlb_flush_vmid(struct kvm *kvm); + * + * We rely on the hardware to broadcast the TLB invalidation to all CPUs + * inside the inner-shareable domain (which is the case for all v7 + * implementations). If we come across a non-IS SMP implementation, we'll + * have to use an IPI based mechanism. Until then, we stick to the simple + * hardware assisted version. + * + * As v7 does not support flushing per IPA, just nuke the whole TLB + * instead, ignoring the ipa value. + */ +static void __hyp_text __tlb_flush_vmid(struct kvm *kvm) +{ + dsb(ishst); + + /* Switch to requested VMID */ + kvm = kern_hyp_va(kvm); + write_sysreg(kvm->arch.vttbr, VTTBR); + isb(); + + write_sysreg(0, TLBIALLIS); + dsb(ish); + isb(); + + write_sysreg(0, VTTBR); +} + +__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm); + +static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) +{ + __tlb_flush_vmid(kvm); +} + +__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, + phys_addr_t ipa); + +static void __hyp_text __tlb_flush_vm_context(void) +{ + write_sysreg(0, TLBIALLNSNHIS); + write_sysreg(0, ICIALLUIS); + dsb(ish); +} + +__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void); diff --git a/arch/arm/kvm/hyp/vfp.S b/arch/arm/kvm/hyp/vfp.S new file mode 100644 index 000000000000..7c297e87eb8b --- /dev/null +++ b/arch/arm/kvm/hyp/vfp.S @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/linkage.h> +#include <asm/vfpmacros.h> + + .text + .pushsection .hyp.text, "ax" + +/* void __vfp_save_state(struct vfp_hard_struct *vfp); */ +ENTRY(__vfp_save_state) + push {r4, r5} + VFPFMRX r1, FPEXC + + @ Make sure *really* VFP is enabled so we can touch the registers. + orr r5, r1, #FPEXC_EN + tst r5, #FPEXC_EX @ Check for VFP Subarchitecture + bic r5, r5, #FPEXC_EX @ FPEXC_EX disable + VFPFMXR FPEXC, r5 + isb + + VFPFMRX r2, FPSCR + beq 1f + + @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so + @ we only need to save them if FPEXC_EX is set. + VFPFMRX r3, FPINST + tst r5, #FPEXC_FP2V + VFPFMRX r4, FPINST2, ne @ vmrsne +1: + VFPFSTMIA r0, r5 @ Save VFP registers + stm r0, {r1-r4} @ Save FPEXC, FPSCR, FPINST, FPINST2 + pop {r4, r5} + bx lr +ENDPROC(__vfp_save_state) + +/* void __vfp_restore_state(struct vfp_hard_struct *vfp); + * Assume FPEXC_EN is on and FPEXC_EX is off */ +ENTRY(__vfp_restore_state) + VFPFLDMIA r0, r1 @ Load VFP registers + ldm r0, {r0-r3} @ Load FPEXC, FPSCR, FPINST, FPINST2 + + VFPFMXR FPSCR, r1 + tst r0, #FPEXC_EX @ Check for VFP Subarchitecture + beq 1f + VFPFMXR FPINST, r2 + tst r0, #FPEXC_FP2V + VFPFMXR FPINST2, r3, ne +1: + VFPFMXR FPEXC, r0 @ FPEXC (last, in case !EN) + bx lr +ENDPROC(__vfp_restore_state) + + .popsection diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 3988e72d16ff..1f9ae17476f9 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -84,14 +84,6 @@ __do_hyp_init: orr r0, r0, r1 mcr p15, 4, r0, c2, c0, 2 @ HTCR - mrc p15, 4, r1, c2, c1, 2 @ VTCR - ldr r2, =VTCR_MASK - bic r1, r1, r2 - bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits - orr r1, r0, r1 - orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S) - mcr p15, 4, r1, c2, c1, 2 @ VTCR - @ Use the same memory attributes for hyp. accesses as the kernel @ (copy MAIRx ro HMAIRx). mrc p15, 0, r0, c10, c2, 0 diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 900ef6dd8f72..b1bd316f14c0 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -17,211 +17,14 @@ */ #include <linux/linkage.h> -#include <linux/const.h> -#include <asm/unified.h> -#include <asm/page.h> -#include <asm/ptrace.h> -#include <asm/asm-offsets.h> -#include <asm/kvm_asm.h> -#include <asm/kvm_arm.h> -#include <asm/vfpmacros.h> -#include "interrupts_head.S" .text -__kvm_hyp_code_start: - .globl __kvm_hyp_code_start - -/******************************************************************** - * Flush per-VMID TLBs - * - * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); - * - * We rely on the hardware to broadcast the TLB invalidation to all CPUs - * inside the inner-shareable domain (which is the case for all v7 - * implementations). If we come across a non-IS SMP implementation, we'll - * have to use an IPI based mechanism. Until then, we stick to the simple - * hardware assisted version. - * - * As v7 does not support flushing per IPA, just nuke the whole TLB - * instead, ignoring the ipa value. - */ -ENTRY(__kvm_tlb_flush_vmid_ipa) - push {r2, r3} - - dsb ishst - add r0, r0, #KVM_VTTBR - ldrd r2, r3, [r0] - mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR - isb - mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) - dsb ish - isb - mov r2, #0 - mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Back to VMID #0 - isb @ Not necessary if followed by eret - - pop {r2, r3} - bx lr -ENDPROC(__kvm_tlb_flush_vmid_ipa) - -/** - * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs - * - * Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address - * parameter - */ - -ENTRY(__kvm_tlb_flush_vmid) - b __kvm_tlb_flush_vmid_ipa -ENDPROC(__kvm_tlb_flush_vmid) - -/******************************************************************** - * Flush TLBs and instruction caches of all CPUs inside the inner-shareable - * domain, for all VMIDs - * - * void __kvm_flush_vm_context(void); - */ -ENTRY(__kvm_flush_vm_context) - mov r0, #0 @ rn parameter for c15 flushes is SBZ - - /* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */ - mcr p15, 4, r0, c8, c3, 4 - /* Invalidate instruction caches Inner Shareable (ICIALLUIS) */ - mcr p15, 0, r0, c7, c1, 0 - dsb ish - isb @ Not necessary if followed by eret - - bx lr -ENDPROC(__kvm_flush_vm_context) - - -/******************************************************************** - * Hypervisor world-switch code - * - * - * int __kvm_vcpu_run(struct kvm_vcpu *vcpu) - */ -ENTRY(__kvm_vcpu_run) - @ Save the vcpu pointer - mcr p15, 4, vcpu, c13, c0, 2 @ HTPIDR - - save_host_regs - - restore_vgic_state - restore_timer_state - - @ Store hardware CP15 state and load guest state - read_cp15_state store_to_vcpu = 0 - write_cp15_state read_from_vcpu = 1 - - @ If the host kernel has not been configured with VFPv3 support, - @ then it is safer if we deny guests from using it as well. -#ifdef CONFIG_VFPv3 - @ Set FPEXC_EN so the guest doesn't trap floating point instructions - VFPFMRX r2, FPEXC @ VMRS - push {r2} - orr r2, r2, #FPEXC_EN - VFPFMXR FPEXC, r2 @ VMSR -#endif - - @ Configure Hyp-role - configure_hyp_role vmentry - - @ Trap coprocessor CRx accesses - set_hstr vmentry - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) - set_hdcr vmentry - - @ Write configured ID register into MIDR alias - ldr r1, [vcpu, #VCPU_MIDR] - mcr p15, 4, r1, c0, c0, 0 - - @ Write guest view of MPIDR into VMPIDR - ldr r1, [vcpu, #CP15_OFFSET(c0_MPIDR)] - mcr p15, 4, r1, c0, c0, 5 - - @ Set up guest memory translation - ldr r1, [vcpu, #VCPU_KVM] - add r1, r1, #KVM_VTTBR - ldrd r2, r3, [r1] - mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR - - @ We're all done, just restore the GPRs and go to the guest - restore_guest_regs - clrex @ Clear exclusive monitor - eret - -__kvm_vcpu_return: - /* - * return convention: - * guest r0, r1, r2 saved on the stack - * r0: vcpu pointer - * r1: exception code - */ - save_guest_regs - - @ Set VMID == 0 - mov r2, #0 - mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Write VTTBR - - @ Don't trap coprocessor accesses for host kernel - set_hstr vmexit - set_hdcr vmexit - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore - -#ifdef CONFIG_VFPv3 - @ Switch VFP/NEON hardware state to the host's - add r7, vcpu, #VCPU_VFP_GUEST - store_vfp_state r7 - add r7, vcpu, #VCPU_VFP_HOST - ldr r7, [r7] - restore_vfp_state r7 - -after_vfp_restore: - @ Restore FPEXC_EN which we clobbered on entry - pop {r2} - VFPFMXR FPEXC, r2 -#else -after_vfp_restore: -#endif - - @ Reset Hyp-role - configure_hyp_role vmexit - - @ Let host read hardware MIDR - mrc p15, 0, r2, c0, c0, 0 - mcr p15, 4, r2, c0, c0, 0 - - @ Back to hardware MPIDR - mrc p15, 0, r2, c0, c0, 5 - mcr p15, 4, r2, c0, c0, 5 - - @ Store guest CP15 state and restore host state - read_cp15_state store_to_vcpu = 1 - write_cp15_state read_from_vcpu = 0 - - save_timer_state - save_vgic_state - - restore_host_regs - clrex @ Clear exclusive monitor -#ifndef CONFIG_CPU_ENDIAN_BE8 - mov r0, r1 @ Return the return code - mov r1, #0 @ Clear upper bits in return value -#else - @ r1 already has return code - mov r0, #0 @ Clear upper bits in return value -#endif /* CONFIG_CPU_ENDIAN_BE8 */ - bx lr @ return to IOCTL - /******************************************************************** * Call function in Hyp mode * * - * u64 kvm_call_hyp(void *hypfn, ...); + * unsigned long kvm_call_hyp(void *hypfn, ...); * * This is not really a variadic function in the classic C-way and care must * be taken when calling this to ensure parameters are passed in registers @@ -232,7 +35,7 @@ after_vfp_restore: * passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the * function pointer can be passed). The function being called must be mapped * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are - * passed in r0 and r1. + * passed in r0 (strictly 32bit). * * A function pointer with a value of 0xffffffff has a special meaning, * and is used to implement __hyp_get_vectors in the same way as in @@ -246,281 +49,4 @@ after_vfp_restore: ENTRY(kvm_call_hyp) hvc #0 bx lr - -/******************************************************************** - * Hypervisor exception vector and handlers - * - * - * The KVM/ARM Hypervisor ABI is defined as follows: - * - * Entry to Hyp mode from the host kernel will happen _only_ when an HVC - * instruction is issued since all traps are disabled when running the host - * kernel as per the Hyp-mode initialization at boot time. - * - * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc - * below) when the HVC instruction is called from SVC mode (i.e. a guest or the - * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC - * instructions are called from within Hyp-mode. - * - * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): - * Switching to Hyp mode is done through a simple HVC #0 instruction. The - * exception vector code will check that the HVC comes from VMID==0 and if - * so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - * - r0 contains a pointer to a HYP function - * - r1, r2, and r3 contain arguments to the above function. - * - The HYP function will be called with its arguments in r0, r1 and r2. - * On HYP function return, we return directly to SVC. - * - * Note that the above is used to execute code in Hyp-mode from a host-kernel - * point of view, and is a different concept from performing a world-switch and - * executing guest code SVC mode (with a VMID != 0). - */ - -/* Handle undef, svc, pabt, or dabt by crashing with a user notice */ -.macro bad_exception exception_code, panic_str - push {r0-r2} - mrrc p15, 6, r0, r1, c2 @ Read VTTBR - lsr r1, r1, #16 - ands r1, r1, #0xff - beq 99f - - load_vcpu @ Load VCPU pointer - .if \exception_code == ARM_EXCEPTION_DATA_ABORT - mrc p15, 4, r2, c5, c2, 0 @ HSR - mrc p15, 4, r1, c6, c0, 0 @ HDFAR - str r2, [vcpu, #VCPU_HSR] - str r1, [vcpu, #VCPU_HxFAR] - .endif - .if \exception_code == ARM_EXCEPTION_PREF_ABORT - mrc p15, 4, r2, c5, c2, 0 @ HSR - mrc p15, 4, r1, c6, c0, 2 @ HIFAR - str r2, [vcpu, #VCPU_HSR] - str r1, [vcpu, #VCPU_HxFAR] - .endif - mov r1, #\exception_code - b __kvm_vcpu_return - - @ We were in the host already. Let's craft a panic-ing return to SVC. -99: mrs r2, cpsr - bic r2, r2, #MODE_MASK - orr r2, r2, #SVC_MODE -THUMB( orr r2, r2, #PSR_T_BIT ) - msr spsr_cxsf, r2 - mrs r1, ELR_hyp - ldr r2, =panic - msr ELR_hyp, r2 - ldr r0, =\panic_str - clrex @ Clear exclusive monitor - eret -.endm - - .text - - .align 5 -__kvm_hyp_vector: - .globl __kvm_hyp_vector - - @ Hyp-mode exception vector - W(b) hyp_reset - W(b) hyp_undef - W(b) hyp_svc - W(b) hyp_pabt - W(b) hyp_dabt - W(b) hyp_hvc - W(b) hyp_irq - W(b) hyp_fiq - - .align -hyp_reset: - b hyp_reset - - .align -hyp_undef: - bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str - - .align -hyp_svc: - bad_exception ARM_EXCEPTION_HVC, svc_die_str - - .align -hyp_pabt: - bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str - - .align -hyp_dabt: - bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str - - .align -hyp_hvc: - /* - * Getting here is either becuase of a trap from a guest or from calling - * HVC from the host kernel, which means "switch to Hyp mode". - */ - push {r0, r1, r2} - - @ Check syndrome register - mrc p15, 4, r1, c5, c2, 0 @ HSR - lsr r0, r1, #HSR_EC_SHIFT - cmp r0, #HSR_EC_HVC - bne guest_trap @ Not HVC instr. - - /* - * Let's check if the HVC came from VMID 0 and allow simple - * switch to Hyp mode - */ - mrrc p15, 6, r0, r2, c2 - lsr r2, r2, #16 - and r2, r2, #0xff - cmp r2, #0 - bne guest_trap @ Guest called HVC - - /* - * Getting here means host called HVC, we shift parameters and branch - * to Hyp function. - */ - pop {r0, r1, r2} - - /* Check for __hyp_get_vectors */ - cmp r0, #-1 - mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR - beq 1f - - push {lr} - mrs lr, SPSR - push {lr} - - mov lr, r0 - mov r0, r1 - mov r1, r2 - mov r2, r3 - -THUMB( orr lr, #1) - blx lr @ Call the HYP function - - pop {lr} - msr SPSR_csxf, lr - pop {lr} -1: eret - -guest_trap: - load_vcpu @ Load VCPU pointer to r0 - str r1, [vcpu, #VCPU_HSR] - - @ Check if we need the fault information - lsr r1, r1, #HSR_EC_SHIFT -#ifdef CONFIG_VFPv3 - cmp r1, #HSR_EC_CP_0_13 - beq switch_to_guest_vfp -#endif - cmp r1, #HSR_EC_IABT - mrceq p15, 4, r2, c6, c0, 2 @ HIFAR - beq 2f - cmp r1, #HSR_EC_DABT - bne 1f - mrc p15, 4, r2, c6, c0, 0 @ HDFAR - -2: str r2, [vcpu, #VCPU_HxFAR] - - /* - * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: - * - * Abort on the stage 2 translation for a memory access from a - * Non-secure PL1 or PL0 mode: - * - * For any Access flag fault or Translation fault, and also for any - * Permission fault on the stage 2 translation of a memory access - * made as part of a translation table walk for a stage 1 translation, - * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR - * is UNKNOWN. - */ - - /* Check for permission fault, and S1PTW */ - mrc p15, 4, r1, c5, c2, 0 @ HSR - and r0, r1, #HSR_FSC_TYPE - cmp r0, #FSC_PERM - tsteq r1, #(1 << 7) @ S1PTW - mrcne p15, 4, r2, c6, c0, 4 @ HPFAR - bne 3f - - /* Preserve PAR */ - mrrc p15, 0, r0, r1, c7 @ PAR - push {r0, r1} - - /* Resolve IPA using the xFAR */ - mcr p15, 0, r2, c7, c8, 0 @ ATS1CPR - isb - mrrc p15, 0, r0, r1, c7 @ PAR - tst r0, #1 - bne 4f @ Failed translation - ubfx r2, r0, #12, #20 - lsl r2, r2, #4 - orr r2, r2, r1, lsl #24 - - /* Restore PAR */ - pop {r0, r1} - mcrr p15, 0, r0, r1, c7 @ PAR - -3: load_vcpu @ Load VCPU pointer to r0 - str r2, [r0, #VCPU_HPFAR] - -1: mov r1, #ARM_EXCEPTION_HVC - b __kvm_vcpu_return - -4: pop {r0, r1} @ Failed translation, return to guest - mcrr p15, 0, r0, r1, c7 @ PAR - clrex - pop {r0, r1, r2} - eret - -/* - * If VFPv3 support is not available, then we will not switch the VFP - * registers; however cp10 and cp11 accesses will still trap and fallback - * to the regular coprocessor emulation code, which currently will - * inject an undefined exception to the guest. - */ -#ifdef CONFIG_VFPv3 -switch_to_guest_vfp: - push {r3-r7} - - @ NEON/VFP used. Turn on VFP access. - set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) - - @ Switch VFP/NEON hardware state to the guest's - add r7, r0, #VCPU_VFP_HOST - ldr r7, [r7] - store_vfp_state r7 - add r7, r0, #VCPU_VFP_GUEST - restore_vfp_state r7 - - pop {r3-r7} - pop {r0-r2} - clrex - eret -#endif - - .align -hyp_irq: - push {r0, r1, r2} - mov r1, #ARM_EXCEPTION_IRQ - load_vcpu @ Load VCPU pointer to r0 - b __kvm_vcpu_return - - .align -hyp_fiq: - b hyp_fiq - - .ltorg - -__kvm_hyp_code_end: - .globl __kvm_hyp_code_end - - .section ".rodata" - -und_die_str: - .ascii "unexpected undefined exception in Hyp mode at: %#08x\n" -pabt_die_str: - .ascii "unexpected prefetch abort in Hyp mode at: %#08x\n" -dabt_die_str: - .ascii "unexpected data abort in Hyp mode at: %#08x\n" -svc_die_str: - .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x\n" +ENDPROC(kvm_call_hyp) diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S deleted file mode 100644 index 51a59504bef4..000000000000 --- a/arch/arm/kvm/interrupts_head.S +++ /dev/null @@ -1,648 +0,0 @@ -#include <linux/irqchip/arm-gic.h> -#include <asm/assembler.h> - -#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) -#define VCPU_USR_SP (VCPU_USR_REG(13)) -#define VCPU_USR_LR (VCPU_USR_REG(14)) -#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4)) - -/* - * Many of these macros need to access the VCPU structure, which is always - * held in r0. These macros should never clobber r1, as it is used to hold the - * exception code on the return path (except of course the macro that switches - * all the registers before the final jump to the VM). - */ -vcpu .req r0 @ vcpu pointer always in r0 - -/* Clobbers {r2-r6} */ -.macro store_vfp_state vfp_base - @ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions - VFPFMRX r2, FPEXC - @ Make sure VFP is enabled so we can touch the registers. - orr r6, r2, #FPEXC_EN - VFPFMXR FPEXC, r6 - - VFPFMRX r3, FPSCR - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so - @ we only need to save them if FPEXC_EX is set. - VFPFMRX r4, FPINST - tst r2, #FPEXC_FP2V - VFPFMRX r5, FPINST2, ne @ vmrsne - bic r6, r2, #FPEXC_EX @ FPEXC_EX disable - VFPFMXR FPEXC, r6 -1: - VFPFSTMIA \vfp_base, r6 @ Save VFP registers - stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2 -.endm - -/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */ -.macro restore_vfp_state vfp_base - VFPFLDMIA \vfp_base, r6 @ Load VFP registers - ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2 - - VFPFMXR FPSCR, r3 - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - VFPFMXR FPINST, r4 - tst r2, #FPEXC_FP2V - VFPFMXR FPINST2, r5, ne -1: - VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN) -.endm - -/* These are simply for the macros to work - value don't have meaning */ -.equ usr, 0 -.equ svc, 1 -.equ abt, 2 -.equ und, 3 -.equ irq, 4 -.equ fiq, 5 - -.macro push_host_regs_mode mode - mrs r2, SP_\mode - mrs r3, LR_\mode - mrs r4, SPSR_\mode - push {r2, r3, r4} -.endm - -/* - * Store all host persistent registers on the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro save_host_regs - /* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */ - mrs r2, ELR_hyp - push {r2} - - /* usr regs */ - push {r4-r12} @ r0-r3 are always clobbered - mrs r2, SP_usr - mov r3, lr - push {r2, r3} - - push_host_regs_mode svc - push_host_regs_mode abt - push_host_regs_mode und - push_host_regs_mode irq - - /* fiq regs */ - mrs r2, r8_fiq - mrs r3, r9_fiq - mrs r4, r10_fiq - mrs r5, r11_fiq - mrs r6, r12_fiq - mrs r7, SP_fiq - mrs r8, LR_fiq - mrs r9, SPSR_fiq - push {r2-r9} -.endm - -.macro pop_host_regs_mode mode - pop {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all host registers from the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro restore_host_regs - pop {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - pop_host_regs_mode irq - pop_host_regs_mode und - pop_host_regs_mode abt - pop_host_regs_mode svc - - pop {r2, r3} - msr SP_usr, r2 - mov lr, r3 - pop {r4-r12} - - pop {r2} - msr ELR_hyp, r2 -.endm - -/* - * Restore SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r1, r2, r3, r4. - */ -.macro restore_guest_regs_mode mode, offset - add r1, vcpu, \offset - ldm r1, {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all guest registers from the vcpu struct. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers *all* registers. - */ -.macro restore_guest_regs - restore_guest_regs_mode svc, #VCPU_SVC_REGS - restore_guest_regs_mode abt, #VCPU_ABT_REGS - restore_guest_regs_mode und, #VCPU_UND_REGS - restore_guest_regs_mode irq, #VCPU_IRQ_REGS - - add r1, vcpu, #VCPU_FIQ_REGS - ldm r1, {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - @ Load return state - ldr r2, [vcpu, #VCPU_PC] - ldr r3, [vcpu, #VCPU_CPSR] - msr ELR_hyp, r2 - msr SPSR_cxsf, r3 - - @ Load user registers - ldr r2, [vcpu, #VCPU_USR_SP] - ldr r3, [vcpu, #VCPU_USR_LR] - msr SP_usr, r2 - mov lr, r3 - add vcpu, vcpu, #(VCPU_USR_REGS) - ldm vcpu, {r0-r12} -.endm - -/* - * Save SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs_mode mode, offset - add r2, vcpu, \offset - mrs r3, SP_\mode - mrs r4, LR_\mode - mrs r5, SPSR_\mode - stm r2, {r3, r4, r5} -.endm - -/* - * Save all guest registers to the vcpu struct - * Expects guest's r0, r1, r2 on the stack. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs - @ Store usr registers - add r2, vcpu, #VCPU_USR_REG(3) - stm r2, {r3-r12} - add r2, vcpu, #VCPU_USR_REG(0) - pop {r3, r4, r5} @ r0, r1, r2 - stm r2, {r3, r4, r5} - mrs r2, SP_usr - mov r3, lr - str r2, [vcpu, #VCPU_USR_SP] - str r3, [vcpu, #VCPU_USR_LR] - - @ Store return state - mrs r2, ELR_hyp - mrs r3, spsr - str r2, [vcpu, #VCPU_PC] - str r3, [vcpu, #VCPU_CPSR] - - @ Store other guest registers - save_guest_regs_mode svc, #VCPU_SVC_REGS - save_guest_regs_mode abt, #VCPU_ABT_REGS - save_guest_regs_mode und, #VCPU_UND_REGS - save_guest_regs_mode irq, #VCPU_IRQ_REGS -.endm - -/* Reads cp15 registers from hardware and stores them in memory - * @store_to_vcpu: If 0, registers are written in-order to the stack, - * otherwise to the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2 - r12 - */ -.macro read_cp15_state store_to_vcpu - mrc p15, 0, r2, c1, c0, 0 @ SCTLR - mrc p15, 0, r3, c1, c0, 2 @ CPACR - mrc p15, 0, r4, c2, c0, 2 @ TTBCR - mrc p15, 0, r5, c3, c0, 0 @ DACR - mrrc p15, 0, r6, r7, c2 @ TTBR 0 - mrrc p15, 1, r8, r9, c2 @ TTBR 1 - mrc p15, 0, r10, c10, c2, 0 @ PRRR - mrc p15, 0, r11, c10, c2, 1 @ NMRR - mrc p15, 2, r12, c0, c0, 0 @ CSSELR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - str r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - str r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r2, vcpu, #CP15_OFFSET(c2_TTBR0) - strd r6, r7, [r2] - add r2, vcpu, #CP15_OFFSET(c2_TTBR1) - strd r8, r9, [r2] - str r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - str r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mrc p15, 0, r2, c13, c0, 1 @ CID - mrc p15, 0, r3, c13, c0, 2 @ TID_URW - mrc p15, 0, r4, c13, c0, 3 @ TID_URO - mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV - mrc p15, 0, r6, c5, c0, 0 @ DFSR - mrc p15, 0, r7, c5, c0, 1 @ IFSR - mrc p15, 0, r8, c5, c1, 0 @ ADFSR - mrc p15, 0, r9, c5, c1, 1 @ AIFSR - mrc p15, 0, r10, c6, c0, 0 @ DFAR - mrc p15, 0, r11, c6, c0, 2 @ IFAR - mrc p15, 0, r12, c12, c0, 0 @ VBAR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c13_CID)] - str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - str r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - str r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - str r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - str r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - str r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL - mrrc p15, 0, r4, r5, c7 @ PAR - mrc p15, 0, r6, c10, c3, 0 @ AMAIR0 - mrc p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \store_to_vcpu == 0 - push {r2,r4-r7} - .else - str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - strd r4, r5, [r12] - str r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - str r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif -.endm - -/* - * Reads cp15 registers from memory and writes them to hardware - * @read_from_vcpu: If 0, registers are read in-order from the stack, - * otherwise from the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - */ -.macro write_cp15_state read_from_vcpu - .if \read_from_vcpu == 0 - pop {r2,r4-r7} - .else - ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - ldrd r4, r5, [r12] - ldr r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - ldr r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif - - mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL - mcrr p15, 0, r4, r5, c7 @ PAR - mcr p15, 0, r6, c10, c3, 0 @ AMAIR0 - mcr p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c13_CID)] - ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mcr p15, 0, r2, c13, c0, 1 @ CID - mcr p15, 0, r3, c13, c0, 2 @ TID_URW - mcr p15, 0, r4, c13, c0, 3 @ TID_URO - mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV - mcr p15, 0, r6, c5, c0, 0 @ DFSR - mcr p15, 0, r7, c5, c0, 1 @ IFSR - mcr p15, 0, r8, c5, c1, 0 @ ADFSR - mcr p15, 0, r9, c5, c1, 1 @ AIFSR - mcr p15, 0, r10, c6, c0, 0 @ DFAR - mcr p15, 0, r11, c6, c0, 2 @ IFAR - mcr p15, 0, r12, c12, c0, 0 @ VBAR - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r12, vcpu, #CP15_OFFSET(c2_TTBR0) - ldrd r6, r7, [r12] - add r12, vcpu, #CP15_OFFSET(c2_TTBR1) - ldrd r8, r9, [r12] - ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mcr p15, 0, r2, c1, c0, 0 @ SCTLR - mcr p15, 0, r3, c1, c0, 2 @ CPACR - mcr p15, 0, r4, c2, c0, 2 @ TTBCR - mcr p15, 0, r5, c3, c0, 0 @ DACR - mcrr p15, 0, r6, r7, c2 @ TTBR 0 - mcrr p15, 1, r8, r9, c2 @ TTBR 1 - mcr p15, 0, r10, c10, c2, 0 @ PRRR - mcr p15, 0, r11, c10, c2, 1 @ NMRR - mcr p15, 2, r12, c0, c0, 0 @ CSSELR -.endm - -/* - * Save the VGIC CPU state into memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro save_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* Save all interesting registers */ - ldr r4, [r2, #GICH_VMCR] - ldr r5, [r2, #GICH_MISR] - ldr r6, [r2, #GICH_EISR0] - ldr r7, [r2, #GICH_EISR1] - ldr r8, [r2, #GICH_ELRSR0] - ldr r9, [r2, #GICH_ELRSR1] - ldr r10, [r2, #GICH_APR] -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r5, r5 ) -ARM_BE8(rev r6, r6 ) -ARM_BE8(rev r7, r7 ) -ARM_BE8(rev r8, r8 ) -ARM_BE8(rev r9, r9 ) -ARM_BE8(rev r10, r10 ) - - str r4, [r11, #VGIC_V2_CPU_VMCR] - str r5, [r11, #VGIC_V2_CPU_MISR] -#ifdef CONFIG_CPU_ENDIAN_BE8 - str r6, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r7, [r11, #VGIC_V2_CPU_EISR] - str r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)] - str r9, [r11, #VGIC_V2_CPU_ELRSR] -#else - str r6, [r11, #VGIC_V2_CPU_EISR] - str r7, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r8, [r11, #VGIC_V2_CPU_ELRSR] - str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)] -#endif - str r10, [r11, #VGIC_V2_CPU_APR] - - /* Clear GICH_HCR */ - mov r5, #0 - str r5, [r2, #GICH_HCR] - - /* Save list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r2], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r3], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -/* - * Restore the VGIC CPU state from memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro restore_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* We only restore a minimal set of registers */ - ldr r3, [r11, #VGIC_V2_CPU_HCR] - ldr r4, [r11, #VGIC_V2_CPU_VMCR] - ldr r8, [r11, #VGIC_V2_CPU_APR] -ARM_BE8(rev r3, r3 ) -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r8, r8 ) - - str r3, [r2, #GICH_HCR] - str r4, [r2, #GICH_VMCR] - str r8, [r2, #GICH_APR] - - /* Restore list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r3], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r2], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -#define CNTHCTL_PL1PCTEN (1 << 0) -#define CNTHCTL_PL1PCEN (1 << 1) - -/* - * Save the timer state onto the VCPU and allow physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro save_timer_state - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL - str r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - - isb - - mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - strd r2, r3, [r5] - - @ Ensure host CNTVCT == CNTPCT - mov r2, #0 - mcrr p15, 4, r2, r2, c14 @ CNTVOFF - -1: - mov r2, #0 @ Clear ENABLE - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL - - @ Allow physical timer/counter access for the host - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN) - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL -.endm - -/* - * Load the timer state from the VCPU and deny physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro restore_timer_state - @ Disallow physical timer access for the guest - @ Physical counter access is allowed - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #CNTHCTL_PL1PCTEN - bic r2, r2, #CNTHCTL_PL1PCEN - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL - - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - ldr r2, [r4, #KVM_TIMER_CNTVOFF] - ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] - mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF - - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - ldrd r2, r3, [r5] - mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - isb - - ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - and r2, r2, #3 - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL -1: -.endm - -.equ vmentry, 0 -.equ vmexit, 1 - -/* Configures the HSTR (Hyp System Trap Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hstr operation - mrc p15, 4, r2, c1, c1, 3 - ldr r3, =HSTR_T(15) - .if \operation == vmentry - orr r2, r2, r3 @ Trap CR{15} - .else - bic r2, r2, r3 @ Don't trap any CRx accesses - .endif - mcr p15, 4, r2, c1, c1, 3 -.endm - -/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return - * (hardware reset value is 0). Keep previous value in r2. - * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if - * VFP wasn't already enabled (always executed on vmtrap). - * If a label is specified with vmexit, it is branched to if VFP wasn't - * enabled. - */ -.macro set_hcptr operation, mask, label = none - mrc p15, 4, r2, c1, c1, 2 - ldr r3, =\mask - .if \operation == vmentry - orr r3, r2, r3 @ Trap coproc-accesses defined in mask - .else - bic r3, r2, r3 @ Don't trap defined coproc-accesses - .endif - mcr p15, 4, r3, c1, c1, 2 - .if \operation != vmentry - .if \operation == vmexit - tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11)) - beq 1f - .endif - isb - .if \label != none - b \label - .endif -1: - .endif -.endm - -/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hdcr operation - mrc p15, 4, r2, c1, c1, 1 - ldr r3, =(HDCR_TPM|HDCR_TPMCR) - .if \operation == vmentry - orr r2, r2, r3 @ Trap some perfmon accesses - .else - bic r2, r2, r3 @ Don't trap any perfmon accesses - .endif - mcr p15, 4, r2, c1, c1, 1 -.endm - -/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */ -.macro configure_hyp_role operation - .if \operation == vmentry - ldr r2, [vcpu, #VCPU_HCR] - ldr r3, [vcpu, #VCPU_IRQ_LINES] - orr r2, r2, r3 - .else - mov r2, #0 - .endif - mcr p15, 4, r2, c1, c1, 0 @ HCR -.endm - -.macro load_vcpu - mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR -.endm diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 7f33b2056ae6..0f6600f05137 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -206,7 +206,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, run->mmio.is_write = is_write; run->mmio.phys_addr = fault_ipa; run->mmio.len = len; - memcpy(run->mmio.data, data_buf, len); + if (is_write) + memcpy(run->mmio.data, data_buf, len); if (!ret) { /* We handled the access successfully in the kernel. */ diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index aba61fd3697a..58dbd5c439df 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -28,6 +28,7 @@ #include <asm/kvm_mmio.h> #include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> +#include <asm/virt.h> #include "trace.h" @@ -598,6 +599,9 @@ int create_hyp_mappings(void *from, void *to) unsigned long start = KERN_TO_HYP((unsigned long)from); unsigned long end = KERN_TO_HYP((unsigned long)to); + if (is_kernel_in_hyp_mode()) + return 0; + start = start & PAGE_MASK; end = PAGE_ALIGN(end); @@ -630,6 +634,9 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) unsigned long start = KERN_TO_HYP((unsigned long)from); unsigned long end = KERN_TO_HYP((unsigned long)to); + if (is_kernel_in_hyp_mode()) + return 0; + /* Check for a valid kernel IO mapping */ if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1)) return -EINVAL; @@ -1431,6 +1438,22 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) } /* + * Check for a cache maintenance operation. Since we + * ended-up here, we know it is outside of any memory + * slot. But we can't find out if that is for a device, + * or if the guest is just being stupid. The only thing + * we know for sure is that this range cannot be cached. + * + * So let's assume that the guest is just being + * cautious, and skip the instruction. + */ + if (kvm_vcpu_dabt_is_cm(vcpu)) { + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + ret = 1; + goto out_unlock; + } + + /* * The IPA is reported as [MAX:12], so we need to * complement it with the bottom 12 bits from the * faulting VA. This is always 12 bits, irrespective diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index a9b3b905e661..c2b131527a64 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -70,7 +70,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) { struct kvm *kvm = source_vcpu->kvm; struct kvm_vcpu *vcpu = NULL; - wait_queue_head_t *wq; + struct swait_queue_head *wq; unsigned long cpu_id; unsigned long context_id; phys_addr_t target_pc; @@ -119,7 +119,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) smp_mb(); /* Make sure the above is visible */ wq = kvm_arch_vcpu_wq(vcpu); - wake_up_interruptible(wq); + swake_up(wq); return PSCI_RET_SUCCESS; } diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index eeb85858d6bb..0048b5a62a50 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -71,7 +71,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) } /* Reset core registers */ - memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs)); + memcpy(&vcpu->arch.ctxt.gp_regs, reset_regs, sizeof(vcpu->arch.ctxt.gp_regs)); /* Reset CP15 registers */ kvm_reset_coprocs(vcpu); diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig index 5c2d54f59f53..b41838a58ae4 100644 --- a/arch/arm/mach-alpine/Kconfig +++ b/arch/arm/mach-alpine/Kconfig @@ -1,6 +1,7 @@ config ARCH_ALPINE bool "Annapurna Labs Alpine platform" depends on ARCH_MULTI_V7 + select ALPINE_MSI select ARM_AMBA select ARM_GIC select GENERIC_IRQ_CHIP diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig new file mode 100644 index 000000000000..6cbe5a2eabab --- /dev/null +++ b/arch/arm/mach-artpec/Kconfig @@ -0,0 +1,20 @@ +menuconfig ARCH_ARTPEC + bool "Axis Communications ARM based ARTPEC SoCs" + depends on ARCH_MULTI_V7 + +if ARCH_ARTPEC + +config MACH_ARTPEC6 + bool "Axis ARTPEC-6 ARM Cortex A9 Platform" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + help + Support for Axis ARTPEC-6 ARM Cortex A9 Platform + +endif diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile new file mode 100644 index 000000000000..78325f0c859c --- /dev/null +++ b/arch/arm/mach-artpec/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MACH_ARTPEC6) := board-artpec6.o diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c new file mode 100644 index 000000000000..71513df3374e --- /dev/null +++ b/arch/arm/mach-artpec/board-artpec6.c @@ -0,0 +1,72 @@ +/* + * ARTPEC-6 device support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/amba/bus.h> +#include <linux/clocksource.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/mfd/syscon.h> +#include <linux/of_platform.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/smp.h> +#include <asm/smp_scu.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/psci.h> +#include <linux/arm-smccc.h> + + +#define ARTPEC6_DMACFG_REGNUM 0x10 +#define ARTPEC6_DMACFG_UARTS_BURST 0xff + +#define SECURE_OP_L2C_WRITEREG 0xb4000001 + +static void __init artpec6_init_machine(void) +{ + struct regmap *regmap; + + regmap = syscon_regmap_lookup_by_compatible("axis,artpec6-syscon"); + + if (!IS_ERR(regmap)) { + /* Use PL011 DMA Burst Request signal instead of DMA + * Single Request + */ + regmap_write(regmap, ARTPEC6_DMACFG_REGNUM, + ARTPEC6_DMACFG_UARTS_BURST); + }; + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg) +{ + struct arm_smccc_res res; + + arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0, + 0, 0, 0, 0, &res); + + WARN_ON(res.a0); +} + +static const char * const artpec6_dt_match[] = { + "axis,artpec6", + NULL +}; + +DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform") + .l2c_aux_val = 0x0C000000, + .l2c_aux_mask = 0xF3FFFFFF, + .l2c_write_sec = artpec6_l2c310_write_sec, + .init_machine = artpec6_init_machine, + .dt_compat = artpec6_dt_match, +MACHINE_END diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 23be2e433097..08047afdf38e 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -104,6 +104,7 @@ config HAVE_AT91_USB_CLK config COMMON_CLK_AT91 bool select COMMON_CLK + select MFD_SYSCON config HAVE_AT91_SMD bool diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index c1a7c6cc00e1..63b4fa25b48a 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -12,7 +12,6 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <asm/system_misc.h> #include "generic.h" #include "soc.h" @@ -33,7 +32,6 @@ static void __init at91rm9200_dt_device_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); - arm_pm_idle = at91rm9200_idle; at91rm9200_pm_init(); } diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index 7eb64f763034..cada2a6412b3 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -62,8 +62,6 @@ static void __init at91sam9_common_init(void) soc_dev = soc_device_to_device(soc); of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); - - arm_pm_idle = at91sam9_idle; } static void __init at91sam9_dt_device_init(void) diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index b0fa7dc7286d..28ca57a2060f 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -11,27 +11,18 @@ #ifndef _AT91_GENERIC_H #define _AT91_GENERIC_H -#include <linux/of.h> -#include <linux/reboot.h> - - /* Map io */ -extern void __init at91_map_io(void); -extern void __init at91_alt_map_io(void); - -/* idle */ -extern void at91rm9200_idle(void); -extern void at91sam9_idle(void); - #ifdef CONFIG_PM extern void __init at91rm9200_pm_init(void); extern void __init at91sam9260_pm_init(void); extern void __init at91sam9g45_pm_init(void); extern void __init at91sam9x5_pm_init(void); +extern void __init sama5_pm_init(void); #else static inline void __init at91rm9200_pm_init(void) { } static inline void __init at91sam9260_pm_init(void) { } static inline void __init at91sam9g45_pm_init(void) { } static inline void __init at91sam9x5_pm_init(void) { } +static inline void __init sama5_pm_init(void) { } #endif #endif /* _AT91_GENERIC_H */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 23726fb31741..f06270198bf1 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -31,10 +31,13 @@ #include <asm/mach/irq.h> #include <asm/fncpy.h> #include <asm/cacheflush.h> +#include <asm/system_misc.h> #include "generic.h" #include "pm.h" +static void __iomem *pmc; + /* * FIXME: this is needed to communicate between the pinctrl driver and * the PM implementation in the machine. Possibly part of the PM @@ -87,7 +90,7 @@ static int at91_pm_verify_clocks(void) unsigned long scsr; int i; - scsr = at91_pmc_read(AT91_PMC_SCSR); + scsr = readl(pmc + AT91_PMC_SCSR); /* USB must not be using PLLB */ if ((scsr & at91_pm_data.uhp_udp_mask) != 0) { @@ -101,8 +104,7 @@ static int at91_pm_verify_clocks(void) if ((scsr & (AT91_PMC_PCK0 << i)) == 0) continue; - - css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; + css = readl(pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS; if (css != AT91_PMC_CSS_SLOW) { pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); return 0; @@ -145,8 +147,8 @@ static void at91_pm_suspend(suspend_state_t state) flush_cache_all(); outer_disable(); - at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0], - at91_ramc_base[1], pm_data); + at91_suspend_sram_fn(pmc, at91_ramc_base[0], + at91_ramc_base[1], pm_data); outer_resume(); } @@ -353,6 +355,21 @@ static __init void at91_dt_ramc(void) at91_pm_set_standby(standby); } +void at91rm9200_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR); +} + +void at91sam9_idle(void) +{ + writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR); + cpu_do_idle(); +} + static void __init at91_pm_sram_init(void) { struct gen_pool *sram_pool; @@ -399,13 +416,36 @@ static void __init at91_pm_sram_init(void) &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); } -static void __init at91_pm_init(void) +static const struct of_device_id atmel_pmc_ids[] __initconst = { + { .compatible = "atmel,at91rm9200-pmc" }, + { .compatible = "atmel,at91sam9260-pmc" }, + { .compatible = "atmel,at91sam9g45-pmc" }, + { .compatible = "atmel,at91sam9n12-pmc" }, + { .compatible = "atmel,at91sam9x5-pmc" }, + { .compatible = "atmel,sama5d3-pmc" }, + { .compatible = "atmel,sama5d2-pmc" }, + { /* sentinel */ }, +}; + +static void __init at91_pm_init(void (*pm_idle)(void)) { - at91_pm_sram_init(); + struct device_node *pmc_np; if (at91_cpuidle_device.dev.platform_data) platform_device_register(&at91_cpuidle_device); + pmc_np = of_find_matching_node(NULL, atmel_pmc_ids); + pmc = of_iomap(pmc_np, 0); + if (!pmc) { + pr_err("AT91: PM not supported, PMC not found\n"); + return; + } + + if (pm_idle) + arm_pm_idle = pm_idle; + + at91_pm_sram_init(); + if (at91_suspend_sram_fn) suspend_set_ops(&at91_pm_ops); else @@ -424,7 +464,7 @@ void __init at91rm9200_pm_init(void) at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP; at91_pm_data.memctrl = AT91_MEMCTRL_MC; - at91_pm_init(); + at91_pm_init(at91rm9200_idle); } void __init at91sam9260_pm_init(void) @@ -432,7 +472,7 @@ void __init at91sam9260_pm_init(void) at91_dt_ramc(); at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC; at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP; - return at91_pm_init(); + at91_pm_init(at91sam9_idle); } void __init at91sam9g45_pm_init(void) @@ -440,7 +480,7 @@ void __init at91sam9g45_pm_init(void) at91_dt_ramc(); at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP; at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR; - return at91_pm_init(); + at91_pm_init(at91sam9_idle); } void __init at91sam9x5_pm_init(void) @@ -448,5 +488,13 @@ void __init at91sam9x5_pm_init(void) at91_dt_ramc(); at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP; at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR; - return at91_pm_init(); + at91_pm_init(at91sam9_idle); +} + +void __init sama5_pm_init(void) +{ + at91_dt_ramc(); + at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP; + at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR; + at91_pm_init(NULL); } diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index d9cf6799aec0..df8fdf1cf66d 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -51,7 +51,7 @@ static void __init sama5_dt_device_init(void) soc_dev = soc_device_to_device(soc); of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); - at91sam9x5_pm_init(); + sama5_pm_init(); } static const char *const sama5_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c index de061ec5a479..41dcf5d65630 100644 --- a/arch/arm/mach-bcm/bcm63xx_pmb.c +++ b/arch/arm/mach-bcm/bcm63xx_pmb.c @@ -92,7 +92,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn, unsigned int *cpu, unsigned int *addr) { - struct device_node *pmb_dn; struct of_phandle_args args; int ret; @@ -109,7 +108,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn, return ret; } - pmb_dn = args.np; if (args.args_count != 2) { pr_err("reset-controller does not conform to reset-cells\n"); return -EINVAL; diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 575defcc53f9..cfae9c71fb74 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -283,7 +283,7 @@ static const struct smp_operations bcm_smp_ops __initconst = { CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", &bcm_smp_ops); -struct smp_operations nsp_smp_ops __initdata = { +static const struct smp_operations nsp_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, .smp_boot_secondary = nsp_boot_secondary, }; diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot deleted file mode 100644 index d079de0b6e3b..000000000000 --- a/arch/arm/mach-cns3xxx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00C00000 diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h index a0f5b60662ae..a642ba5feb64 100644 --- a/arch/arm/mach-cns3xxx/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/cns3xxx.h @@ -162,13 +162,11 @@ #define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ #define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ -#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 #define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */ #define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000 #define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */ -#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000 #define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */ #define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000 @@ -177,16 +175,13 @@ #define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000 #define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */ -#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000 #define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */ -#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000 #define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */ #define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000 #define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */ -#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000 #define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */ #define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000 @@ -195,7 +190,6 @@ #define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000 #define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */ -#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000 /* * Testchip peripheral and fpga gic regions diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 47905a50e075..318394ed5c7a 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -220,13 +220,13 @@ static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci, u32 mask = (0x1ull << (size * 8)) - 1; int shift = (where % 4) * 8; - v = readl_relaxed(base + (where & 0xffc)); + v = readl_relaxed(base); v &= ~(mask << shift); v |= (val & mask) << shift; - writel_relaxed(v, base + (where & 0xffc)); - readl_relaxed(base + (where & 0xffc)); + writel_relaxed(v, base); + readl_relaxed(base); } static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bcaf1d025505..36c8f5324e43 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -9,7 +9,6 @@ config CP_INTC config ARCH_DAVINCI_DMx bool - select CPU_ARM926T menu "TI DaVinci Implementations" @@ -32,7 +31,7 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" - depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR + depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE @@ -40,13 +39,12 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" - depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR + depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX select CP_INTC config ARCH_DAVINCI_DA8XX bool - select CPU_ARM926T config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" @@ -58,7 +56,7 @@ comment "DaVinci Board Type" config MACH_DA8XX_DT bool "Support DA8XX platforms using device tree" default y - depends on ARCH_DAVINCI_DA8XX + depends on ARCH_DAVINCI_DA850 select PINCTRL help Say y here to include support for TI DaVinci DA850 based using @@ -68,8 +66,6 @@ config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x depends on ARCH_DAVINCI_DM644x - select EEPROM_AT24 - select I2C help Configure this option to specify the whether the board used for development is a DM644x EVM @@ -77,8 +73,6 @@ config MACH_DAVINCI_EVM config MACH_SFFSDR bool "Lyrtech SFFSDR" depends on ARCH_DAVINCI_DM644x - select EEPROM_AT24 - select I2C help Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. @@ -109,8 +103,6 @@ config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x - select EEPROM_AT24 - select I2C select MACH_DAVINCI_DM6467TEVM help Configure this option to specify the whether the board used @@ -123,8 +115,6 @@ config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 depends on ARCH_DAVINCI_DM365 - select EEPROM_AT24 - select I2C help Configure this option to specify whether the board used for development is a DM365 EVM @@ -133,9 +123,7 @@ config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 - select EEPROM_AT24 - select GPIO_PCF857X - select I2C + select GPIO_PCF857X if I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -204,8 +192,6 @@ endchoice config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 - select EEPROM_AT24 - select I2C help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 7a20507a3eef..68cc09907828 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -267,7 +267,7 @@ static struct platform_device rtc_dev = { static struct snd_platform_data dm644x_evm_snd_data; /*----------------------------------------------------------------------*/ - +#ifdef CONFIG_I2C /* * I2C GPIO expanders */ @@ -612,6 +612,7 @@ static void __init evm_init_i2c(void) i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } +#endif #define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) @@ -780,7 +781,9 @@ static __init void davinci_evm_init(void) pr_warn("%s: Cannot configure AEMIF\n", __func__); +#ifdef CONFIG_I2C evm_leds[7].default_trigger = "nand-disk"; +#endif if (HAS_NOR) pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n"); } else if (HAS_NOR) @@ -789,9 +792,10 @@ static __init void davinci_evm_init(void) platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); +#ifdef CONFIG_I2C evm_init_i2c(); - davinci_setup_mmc(0, &dm6446evm_mmc_config); +#endif dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg); davinci_serial_init(dm644x_serial_device); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index ee6ab7e8d3b0..f702d4fc8eb8 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -121,6 +121,7 @@ static struct platform_device davinci_nand_device = { #define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) +#ifdef CONFIG_I2C /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) #define DM646X_EVM_ATA_PWD BIT(1) @@ -316,6 +317,7 @@ static struct at24_platform_data eeprom_info = { .setup = davinci_get_mac_addr, .context = (void *)0x7f00, }; +#endif static u8 dm646x_iis_serializer_direction[] = { TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE, @@ -346,6 +348,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { }, }; +#ifdef CONFIG_I2C static struct i2c_client *cpld_client; static int cpld_video_probe(struct i2c_client *client, @@ -710,6 +713,7 @@ static void __init evm_init_i2c(void) evm_init_cpld(); evm_init_video(); } +#endif #define DM6467T_EVM_REF_FREQ 33000000 @@ -764,7 +768,10 @@ static __init void evm_init(void) if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); +#ifdef CONFIG_I2C evm_init_i2c(); +#endif + davinci_serial_init(dm646x_serial_device); dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index de1316bf643a..d97c588550ad 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -51,6 +51,7 @@ struct factory_config { static struct factory_config factory_config; +#ifdef CONFIG_CPU_FREQ struct part_no_info { const char *part_no; /* part number string of interest */ int max_freq; /* khz */ @@ -87,7 +88,6 @@ static struct part_no_info mityomapl138_pn_info[] = { }, }; -#ifdef CONFIG_CPU_FREQ static void mityomapl138_cpufreq_init(const char *partnum) { int i, ret; @@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum) static void mityomapl138_cpufreq_init(const char *partnum) { } #endif -static void read_factory_config(struct memory_accessor *a, void *context) +static void read_factory_config(struct nvmem_device *nvmem, void *context) { int ret; const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; - ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); + ret = nvmem_device_read(nvmem, 0, sizeof(factory_config), + &factory_config); if (ret != sizeof(struct factory_config)) { pr_warn("Read Factory Config Failed: %d\n", ret); goto bad_config; diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index a794f6d9d444..f55ef2ef2f92 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info); void __iomem *davinci_intc_base; int davinci_intc_type; -void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) { char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; off_t offset = (off_t)context; /* Read MAC addr from EEPROM */ - if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index e88b7a5cde99..725e693639d2 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -17,6 +17,7 @@ #include <linux/ahci_platform.h> #include <linux/clk.h> #include <linux/reboot.h> +#include <linux/dmaengine.h> #include <mach/cputype.h> #include <mach/common.h> @@ -233,16 +234,54 @@ static const struct platform_device_info da850_edma1_device __initconst = { .size_data = sizeof(da850_edma1_pdata), }; +static const struct dma_slave_map da830_edma_map[] = { + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, + { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, + { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, + { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, + { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, +}; + int __init da830_register_edma(struct edma_rsv_info *rsv) { struct platform_device *edma_pdev; da8xx_edma0_pdata.rsv = rsv; + da8xx_edma0_pdata.slave_map = da830_edma_map; + da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } +static const struct dma_slave_map da850_edma0_map[] = { + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) }, + { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, + { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, + { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, +}; + +static const struct dma_slave_map da850_edma1_map[] = { + { "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) }, + { "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) }, +}; + int __init da850_register_edma(struct edma_rsv_info *rsv[2]) { struct platform_device *edma_pdev; @@ -252,11 +291,18 @@ int __init da850_register_edma(struct edma_rsv_info *rsv[2]) da850_edma1_pdata.rsv = rsv[1]; } + da8xx_edma0_pdata.slave_map = da850_edma0_map; + da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); if (IS_ERR(edma_pdev)) { pr_warn("%s: Failed to register eDMA0\n", __func__); return PTR_ERR(edma_pdev); } + + da850_edma1_pdata.slave_map = da850_edma1_map; + da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map); + edma_pdev = platform_device_register_full(&da850_edma1_device); return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index c7c1458df23c..a0ecf499c2f2 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,6 +13,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -576,9 +577,28 @@ static s8 queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm355_edma_map[] = { + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) }, + { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) }, + { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, + { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, + { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, + { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, +}; + static struct edma_soc_info dm355_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm355_edma_map, + .slavecnt = ARRAY_SIZE(dm355_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 01843fbcc9ea..384d3674dd9b 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -17,6 +17,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -862,9 +863,30 @@ static s8 dm365_queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm365_edma_map[] = { + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, + { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, + { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, + { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, +}; + static struct edma_soc_info dm365_edma_pdata = { .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, + .slave_map = dm365_edma_map, + .slavecnt = ARRAY_SIZE(dm365_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index b28071ae3a57..b4b3a8b9ca20 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> +#include <linux/dmaengine.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -505,9 +506,20 @@ static s8 queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm644x_edma_map[] = { + { "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, +}; + static struct edma_soc_info dm644x_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm644x_edma_map, + .slavecnt = ARRAY_SIZE(dm644x_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index cf80786e2471..a43db0f5fbaa 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -9,6 +9,7 @@ * or implied. */ #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -540,9 +541,19 @@ static s8 dm646x_queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm646x_edma_map[] = { + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) }, + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) }, + { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) }, + { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) }, +}; + static struct edma_soc_info dm646x_edma_pdata = { .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm646x_edma_map, + .slavecnt = ARRAY_SIZE(dm646x_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 8fb97b93b6bb..53b456a5bbe0 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -30,7 +30,7 @@ u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ -static void putc(char c) +static inline void putc(char c) { if (!uart) return; diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index d8c439c89ea9..0bd6d894c597 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -8,7 +8,7 @@ config DOVE_LEGACY config MACH_DOVE_DB bool "Marvell DB-MV88AP510 Development Board" select DOVE_LEGACY - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell DB-MV88AP510 Development Board. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 652a0bb11578..207fa2c737a6 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -5,7 +5,7 @@ # # Licensed under GPLv2 -# Configuration options for the EXYNOS4 +# Configuration options for the EXYNOS menuconfig ARCH_EXYNOS bool "Samsung EXYNOS" @@ -17,6 +17,7 @@ menuconfig ARCH_EXYNOS select ARM_GIC select COMMON_CLK_SAMSUNG select EXYNOS_THERMAL + select EXYNOS_PMU select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -25,8 +26,10 @@ menuconfig ARCH_EXYNOS select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS if PM select S5P_DEV_MFC + select SOC_SAMSUNG select SRAM select THERMAL + select THERMAL_OF select MFD_SYSCON select CLKSRC_EXYNOS_MCT select POWER_RESET diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 2f306767cdfe..34d29df3e006 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -9,7 +9,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree) # Core -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o obj-$(CONFIG_PM_SLEEP) += suspend.o diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot deleted file mode 100644 index b9862e22bf10..000000000000 --- a/arch/arm/mach-exynos/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x40008000 -params_phys-y := 0x40000100 diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index e349a038976d..5365bf1f586a 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,7 +12,6 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H -#include <linux/of.h> #include <linux/platform_data/cpuidle-exynos.h> #define EXYNOS3250_SOC_ID 0xE3472000 diff --git a/arch/arm/mach-exynos/exynos-pmu.h b/arch/arm/mach-exynos/exynos-pmu.h deleted file mode 100644 index a2ab0d52b230..000000000000 --- a/arch/arm/mach-exynos/exynos-pmu.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header for EXYNOS PMU Driver support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __EXYNOS_PMU_H -#define __EXYNOS_PMU_H - -enum sys_powerdown { - SYS_AFTR, - SYS_LPA, - SYS_SLEEP, - NUM_SYS_POWERDOWN, -}; - -extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); - -#endif /* __EXYNOS_PMU_H */ diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 1c47aee31e9c..bbf51a46f772 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -11,29 +11,23 @@ #include <linux/init.h> #include <linux/io.h> -#include <linux/kernel.h> -#include <linux/serial_s3c.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/pm_domain.h> #include <linux/irqchip.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/memory.h> #include <mach/map.h> #include "common.h" #include "mfc.h" -#include "regs-pmu.h" - -void __iomem *pmu_base_addr; static struct map_desc exynos4_iodesc[] __initdata = { { @@ -70,11 +64,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), - .length = 144 * SZ_1K, - .type = MT_DEVICE, }, }; @@ -230,6 +219,10 @@ static const struct of_device_id exynos_cpufreq_matches[] = { { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, +#ifndef CONFIG_BL_SWITCHER + { .compatible = "samsung,exynos5420", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos5800", .data = "cpufreq-dt" }, +#endif { /* sentinel */ } }; diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 111cfbf66fdb..1bfd1b0bd9dc 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -20,8 +20,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/suspend.h> -#include <mach/map.h> - #include "common.h" #include "smc.h" diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index de3ae59e1cfb..c88325d56743 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -2,7 +2,7 @@ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * EXYNOS4 - Memory map definitions + * EXYNOS - Memory map definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,30 +14,18 @@ #include <plat/map-base.h> -/* - * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x10000) - #include <plat/map-s5p.h> #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_CMU 0x10030000 -#define EXYNOS5_PA_CMU 0x10010000 #define EXYNOS4_PA_DMC0 0x10400000 #define EXYNOS4_PA_DMC1 0x10410000 #define EXYNOS4_PA_COREPERI 0x10500000 -#define EXYNOS4_PA_L2CC 0x10502000 #define EXYNOS4_PA_SROMC 0x12570000 #define EXYNOS5_PA_SROMC 0x12250000 -/* Compatibility UART */ - -#define EXYNOS5440_PA_UART0 0x000B0000 - #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 56978199c479..f086bf615b29 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -16,13 +16,13 @@ #include <linux/io.h> #include <linux/of_address.h> #include <linux/syscore_ops.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cputype.h> #include <asm/cp15.h> #include <asm/mcpm.h> #include <asm/smp_plat.h> -#include "regs-pmu.h" #include "common.h" #define EXYNOS5420_CPUS_PER_CLUSTER 4 diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 5bd9559786ba..85c3be63d644 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -15,11 +15,11 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/delay.h> -#include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> #include <linux/of_address.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/cp15.h> @@ -30,7 +30,6 @@ #include <mach/map.h> #include "common.h" -#include "regs-pmu.h" extern void exynos4_secondary_startup(void); diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 9c1506b499bc..c43b776a51a3 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -17,7 +17,9 @@ #include <linux/suspend.h> #include <linux/cpu_pm.h> #include <linux/io.h> -#include <linux/err.h> +#include <linux/of.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> +#include <linux/soc/samsung/exynos-pmu.h> #include <asm/firmware.h> #include <asm/smp_scu.h> @@ -26,11 +28,7 @@ #include <mach/map.h> -#include <plat/pm-common.h> - #include "common.h" -#include "exynos-pmu.h" -#include "regs-pmu.h" static inline void __iomem *exynos_boot_vector_addr(void) { diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c deleted file mode 100644 index dbf9fe98d479..000000000000 --- a/arch/arm/mach-exynos/pmu.c +++ /dev/null @@ -1,967 +0,0 @@ -/* - * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS - CPU PMU(Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <asm/cputype.h> - -#include "exynos-pmu.h" -#include "regs-pmu.h" - -#define PMU_TABLE_END (-1U) - -struct exynos_pmu_conf { - unsigned int offset; - u8 val[NUM_SYS_POWERDOWN]; -}; - -struct exynos_pmu_data { - const struct exynos_pmu_conf *pmu_config; - const struct exynos_pmu_conf *pmu_config_extra; - - void (*pmu_init)(void); - void (*powerdown_conf)(enum sys_powerdown); - void (*powerdown_conf_extra)(enum sys_powerdown); -}; - -struct exynos_pmu_context { - struct device *dev; - const struct exynos_pmu_data *pmu_data; -}; - -static void __iomem *pmu_base_addr; -static struct exynos_pmu_context *pmu_context; - -static inline void pmu_raw_writel(u32 val, u32 offset) -{ - writel_relaxed(val, pmu_base_addr + offset); -} - -static inline u32 pmu_raw_readl(u32 offset) -{ - return readl_relaxed(pmu_base_addr + offset); -} - -static struct exynos_pmu_conf exynos3250_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */ - { EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} }, - { EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4210_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } }, - { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } }, - { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, - { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4x12_pmu_config[] = { - { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, - { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } }, - /* XXX_OPTION register should be set other field */ - { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } }, - { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, - { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4412_pmu_config[] = { - { S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE3_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE3, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL3, { 0x0, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos5250_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_FSYS_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } }, - { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_USBOTG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_G2D_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_USBDRD_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SDMMC_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_CSSYS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SECSS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_ROTATOR_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_JPEG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_JPEG_MEM_OPTION, { 0x10, 0x10, 0x0} }, - { EXYNOS5_HSI_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_MCUIOP_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SATA_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { PMU_TABLE_END,}, -}; - -static struct exynos_pmu_conf exynos5420_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_ARM_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_ARM_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x0} }, - { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5420_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} }, - { EXYNOS5420_G2D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_MSC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_FSYS_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_FSYS2_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_PSGEN_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_PERIC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_WCORE_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { PMU_TABLE_END,}, -}; - -static unsigned int const exynos3250_list_feed[] = { - EXYNOS3_ARM_CORE_OPTION(0), - EXYNOS3_ARM_CORE_OPTION(1), - EXYNOS3_ARM_CORE_OPTION(2), - EXYNOS3_ARM_CORE_OPTION(3), - EXYNOS3_ARM_COMMON_OPTION, - EXYNOS3_TOP_PWR_OPTION, - EXYNOS3_CORE_TOP_PWR_OPTION, - S5P_CAM_OPTION, - S5P_MFC_OPTION, - S5P_G3D_OPTION, - S5P_LCD0_OPTION, - S5P_ISP_OPTION, -}; - -static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode) -{ - unsigned int i; - unsigned int tmp; - - /* Enable only SC_FEEDBACK */ - for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) { - tmp = pmu_raw_readl(exynos3250_list_feed[i]); - tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER); - tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK; - pmu_raw_writel(tmp, exynos3250_list_feed[i]); - } - - if (mode != SYS_SLEEP) - return; - - pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION); - pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION); - pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION); - pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION, - EXYNOS3_EXT_REGULATOR_COREBLK_DURATION); -} - -static unsigned int const exynos5_list_both_cnt_feed[] = { - EXYNOS5_ARM_CORE0_OPTION, - EXYNOS5_ARM_CORE1_OPTION, - EXYNOS5_ARM_COMMON_OPTION, - EXYNOS5_GSCL_OPTION, - EXYNOS5_ISP_OPTION, - EXYNOS5_MFC_OPTION, - EXYNOS5_G3D_OPTION, - EXYNOS5_DISP1_OPTION, - EXYNOS5_MAU_OPTION, - EXYNOS5_TOP_PWR_OPTION, - EXYNOS5_TOP_PWR_SYSMEM_OPTION, -}; - -static unsigned int const exynos5_list_disable_wfi_wfe[] = { - EXYNOS5_ARM_CORE1_OPTION, - EXYNOS5_FSYS_ARM_OPTION, - EXYNOS5_ISP_ARM_OPTION, -}; - -static unsigned int const exynos5420_list_disable_pmu_reg[] = { - EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, - EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, - EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, - EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, -}; - -static void exynos5420_powerdown_conf(enum sys_powerdown mode) -{ - u32 this_cluster; - - this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1); - - /* - * set the cluster id to IROM register to ensure that we wake - * up with the current cluster. - */ - pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2); -} - - -static void exynos5_powerdown_conf(enum sys_powerdown mode) -{ - unsigned int i; - unsigned int tmp; - - /* - * Enable both SC_FEEDBACK and SC_COUNTER - */ - for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) { - tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]); - tmp |= (EXYNOS5_USE_SC_FEEDBACK | - EXYNOS5_USE_SC_COUNTER); - pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]); - } - - /* - * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable - */ - tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION); - tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION); - - /* - * Disable WFI/WFE on XXX_OPTION - */ - for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) { - tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]); - tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE | - EXYNOS5_OPTION_USE_STANDBYWFI); - pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]); - } -} - -void exynos_sys_powerdown_conf(enum sys_powerdown mode) -{ - unsigned int i; - const struct exynos_pmu_data *pmu_data; - - if (!pmu_context) - return; - - pmu_data = pmu_context->pmu_data; - - if (pmu_data->powerdown_conf) - pmu_data->powerdown_conf(mode); - - if (pmu_data->pmu_config) { - for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++) - pmu_raw_writel(pmu_data->pmu_config[i].val[mode], - pmu_data->pmu_config[i].offset); - } - - if (pmu_data->powerdown_conf_extra) - pmu_data->powerdown_conf_extra(mode); - - if (pmu_data->pmu_config_extra) { - for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++) - pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode], - pmu_data->pmu_config_extra[i].offset); - } -} - -static void exynos3250_pmu_init(void) -{ - unsigned int value; - - /* - * To prevent from issuing new bus request form L2 memory system - * If core status is power down, should be set '1' to L2 power down - */ - value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION); - value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION); - - /* Enable USE_STANDBY_WFI for all CORE */ - pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); - - /* - * Set PSHOLD port for output high - */ - value = pmu_raw_readl(S5P_PS_HOLD_CONTROL); - value |= S5P_PS_HOLD_OUTPUT_HIGH; - pmu_raw_writel(value, S5P_PS_HOLD_CONTROL); - - /* - * Enable signal for PSHOLD port - */ - value = pmu_raw_readl(S5P_PS_HOLD_CONTROL); - value |= S5P_PS_HOLD_EN; - pmu_raw_writel(value, S5P_PS_HOLD_CONTROL); -} - -static void exynos5250_pmu_init(void) -{ - unsigned int value; - /* - * When SYS_WDTRESET is set, watchdog timer reset request - * is ignored by power management unit. - */ - value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE); - value &= ~EXYNOS5_SYS_WDTRESET; - pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE); - - value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST); - value &= ~EXYNOS5_SYS_WDTRESET; - pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST); -} - -static void exynos5420_pmu_init(void) -{ - unsigned int value; - int i; - - /* - * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers - * for local power blocks to Low initially as per Table 8-4: - * "System-Level Power-Down Configuration Registers". - */ - for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++) - pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]); - - /* Enable USE_STANDBY_WFI for all CORE */ - pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); - - value = pmu_raw_readl(EXYNOS_L2_OPTION(0)); - value &= ~EXYNOS5_USE_RETENTION; - pmu_raw_writel(value, EXYNOS_L2_OPTION(0)); - - value = pmu_raw_readl(EXYNOS_L2_OPTION(1)); - value &= ~EXYNOS5_USE_RETENTION; - pmu_raw_writel(value, EXYNOS_L2_OPTION(1)); - - /* - * If L2_COMMON is turned off, clocks related to ATB async - * bridge are gated. Thus, when ISP power is gated, LPI - * may get stuck. - */ - value = pmu_raw_readl(EXYNOS5420_LPI_MASK); - value |= EXYNOS5420_ATB_ISP_ARM; - pmu_raw_writel(value, EXYNOS5420_LPI_MASK); - - value = pmu_raw_readl(EXYNOS5420_LPI_MASK1); - value |= EXYNOS5420_ATB_KFC; - pmu_raw_writel(value, EXYNOS5420_LPI_MASK1); - - /* Prevent issue of new bus request from L2 memory */ - value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION); - value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION); - - value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION); - value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION); - - /* This setting is to reduce suspend/resume time */ - pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3); - - /* Serialized CPU wakeup of Eagle */ - pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE); - - pmu_raw_writel(SPREAD_USE_STANDWFI, - EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI); - - pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER); - pr_info("EXYNOS5420 PMU initialized\n"); -} - -static const struct exynos_pmu_data exynos3250_pmu_data = { - .pmu_config = exynos3250_pmu_config, - .pmu_init = exynos3250_pmu_init, - .powerdown_conf_extra = exynos3250_powerdown_conf_extra, -}; - -static const struct exynos_pmu_data exynos4210_pmu_data = { - .pmu_config = exynos4210_pmu_config, -}; - -static const struct exynos_pmu_data exynos4212_pmu_data = { - .pmu_config = exynos4x12_pmu_config, -}; - -static const struct exynos_pmu_data exynos4412_pmu_data = { - .pmu_config = exynos4x12_pmu_config, - .pmu_config_extra = exynos4412_pmu_config, -}; - -static const struct exynos_pmu_data exynos5250_pmu_data = { - .pmu_config = exynos5250_pmu_config, - .pmu_init = exynos5250_pmu_init, - .powerdown_conf = exynos5_powerdown_conf, -}; - -static const struct exynos_pmu_data exynos5420_pmu_data = { - .pmu_config = exynos5420_pmu_config, - .pmu_init = exynos5420_pmu_init, - .powerdown_conf = exynos5420_powerdown_conf, -}; - -/* - * PMU platform driver and devicetree bindings. - */ -static const struct of_device_id exynos_pmu_of_device_ids[] = { - { - .compatible = "samsung,exynos3250-pmu", - .data = &exynos3250_pmu_data, - }, { - .compatible = "samsung,exynos4210-pmu", - .data = &exynos4210_pmu_data, - }, { - .compatible = "samsung,exynos4212-pmu", - .data = &exynos4212_pmu_data, - }, { - .compatible = "samsung,exynos4412-pmu", - .data = &exynos4412_pmu_data, - }, { - .compatible = "samsung,exynos5250-pmu", - .data = &exynos5250_pmu_data, - }, { - .compatible = "samsung,exynos5420-pmu", - .data = &exynos5420_pmu_data, - }, - { /*sentinel*/ }, -}; - -static int exynos_pmu_probe(struct platform_device *pdev) -{ - const struct of_device_id *match; - struct device *dev = &pdev->dev; - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - pmu_base_addr = devm_ioremap_resource(dev, res); - if (IS_ERR(pmu_base_addr)) - return PTR_ERR(pmu_base_addr); - - pmu_context = devm_kzalloc(&pdev->dev, - sizeof(struct exynos_pmu_context), - GFP_KERNEL); - if (!pmu_context) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - pmu_context->dev = dev; - - match = of_match_node(exynos_pmu_of_device_ids, dev->of_node); - - pmu_context->pmu_data = match->data; - - if (pmu_context->pmu_data->pmu_init) - pmu_context->pmu_data->pmu_init(); - - platform_set_drvdata(pdev, pmu_context); - - dev_dbg(dev, "Exynos PMU Driver probe done\n"); - return 0; -} - -static struct platform_driver exynos_pmu_driver = { - .driver = { - .name = "exynos-pmu", - .of_match_table = exynos_pmu_of_device_ids, - }, - .probe = exynos_pmu_probe, -}; - -static int __init exynos_pmu_init(void) -{ - return platform_driver_register(&exynos_pmu_driver); - -} -postcore_initcall(exynos_pmu_init); diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h deleted file mode 100644 index 5e4f4c23b06a..000000000000 --- a/arch/arm/mach-exynos/regs-pmu.h +++ /dev/null @@ -1,693 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - Power management unit definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_PMU_H -#define __ASM_ARCH_REGS_PMU_H __FILE__ - -#define S5P_CENTRAL_SEQ_CONFIGURATION 0x0200 - -#define S5P_CENTRAL_LOWPWR_CFG (1 << 16) - -#define S5P_CENTRAL_SEQ_OPTION 0x0208 - -#define S5P_USE_STANDBY_WFI0 (1 << 16) -#define S5P_USE_STANDBY_WFI1 (1 << 17) -#define S5P_USE_STANDBY_WFI2 (1 << 19) -#define S5P_USE_STANDBY_WFI3 (1 << 20) -#define S5P_USE_STANDBY_WFE0 (1 << 24) -#define S5P_USE_STANDBY_WFE1 (1 << 25) -#define S5P_USE_STANDBY_WFE2 (1 << 27) -#define S5P_USE_STANDBY_WFE3 (1 << 28) - -#define S5P_USE_STANDBY_WFI_ALL \ - (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \ - S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \ - S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \ - S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3) - -#define S5P_USE_DELAYED_RESET_ASSERTION BIT(12) - -#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n) -#define EXYNOS_WAKEUP_FROM_LOWPWR (1 << 28) -#define EXYNOS_SWRESET 0x0400 -#define EXYNOS5440_SWRESET 0x00C4 - -#define S5P_WAKEUP_STAT 0x0600 -#define S5P_EINT_WAKEUP_MASK 0x0604 -#define S5P_WAKEUP_MASK 0x0608 -#define S5P_WAKEUP_MASK2 0x0614 - -#define S5P_INFORM0 0x0800 -#define S5P_INFORM1 0x0804 -#define S5P_INFORM5 0x0814 -#define S5P_INFORM6 0x0818 -#define S5P_INFORM7 0x081C -#define S5P_PMU_SPARE2 0x0908 -#define S5P_PMU_SPARE3 0x090C - -#define EXYNOS_IROM_DATA2 0x0988 -#define S5P_ARM_CORE0_LOWPWR 0x1000 -#define S5P_DIS_IRQ_CORE0 0x1004 -#define S5P_DIS_IRQ_CENTRAL0 0x1008 -#define S5P_ARM_CORE1_LOWPWR 0x1010 -#define S5P_DIS_IRQ_CORE1 0x1014 -#define S5P_DIS_IRQ_CENTRAL1 0x1018 -#define S5P_ARM_COMMON_LOWPWR 0x1080 -#define S5P_L2_0_LOWPWR 0x10C0 -#define S5P_L2_1_LOWPWR 0x10C4 -#define S5P_CMU_ACLKSTOP_LOWPWR 0x1100 -#define S5P_CMU_SCLKSTOP_LOWPWR 0x1104 -#define S5P_CMU_RESET_LOWPWR 0x110C -#define S5P_APLL_SYSCLK_LOWPWR 0x1120 -#define S5P_MPLL_SYSCLK_LOWPWR 0x1124 -#define S5P_VPLL_SYSCLK_LOWPWR 0x1128 -#define S5P_EPLL_SYSCLK_LOWPWR 0x112C -#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR 0x1138 -#define S5P_CMU_RESET_GPSALIVE_LOWPWR 0x113C -#define S5P_CMU_CLKSTOP_CAM_LOWPWR 0x1140 -#define S5P_CMU_CLKSTOP_TV_LOWPWR 0x1144 -#define S5P_CMU_CLKSTOP_MFC_LOWPWR 0x1148 -#define S5P_CMU_CLKSTOP_G3D_LOWPWR 0x114C -#define S5P_CMU_CLKSTOP_LCD0_LOWPWR 0x1150 -#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR 0x1158 -#define S5P_CMU_CLKSTOP_GPS_LOWPWR 0x115C -#define S5P_CMU_RESET_CAM_LOWPWR 0x1160 -#define S5P_CMU_RESET_TV_LOWPWR 0x1164 -#define S5P_CMU_RESET_MFC_LOWPWR 0x1168 -#define S5P_CMU_RESET_G3D_LOWPWR 0x116C -#define S5P_CMU_RESET_LCD0_LOWPWR 0x1170 -#define S5P_CMU_RESET_MAUDIO_LOWPWR 0x1178 -#define S5P_CMU_RESET_GPS_LOWPWR 0x117C -#define S5P_TOP_BUS_LOWPWR 0x1180 -#define S5P_TOP_RETENTION_LOWPWR 0x1184 -#define S5P_TOP_PWR_LOWPWR 0x1188 -#define S5P_LOGIC_RESET_LOWPWR 0x11A0 -#define S5P_ONENAND_MEM_LOWPWR 0x11C0 -#define S5P_G2D_ACP_MEM_LOWPWR 0x11C8 -#define S5P_USBOTG_MEM_LOWPWR 0x11CC -#define S5P_HSMMC_MEM_LOWPWR 0x11D0 -#define S5P_CSSYS_MEM_LOWPWR 0x11D4 -#define S5P_SECSS_MEM_LOWPWR 0x11D8 -#define S5P_PAD_RETENTION_DRAM_LOWPWR 0x1200 -#define S5P_PAD_RETENTION_MAUDIO_LOWPWR 0x1204 -#define S5P_PAD_RETENTION_GPIO_LOWPWR 0x1220 -#define S5P_PAD_RETENTION_UART_LOWPWR 0x1224 -#define S5P_PAD_RETENTION_MMCA_LOWPWR 0x1228 -#define S5P_PAD_RETENTION_MMCB_LOWPWR 0x122C -#define S5P_PAD_RETENTION_EBIA_LOWPWR 0x1230 -#define S5P_PAD_RETENTION_EBIB_LOWPWR 0x1234 -#define S5P_PAD_RETENTION_ISOLATION_LOWPWR 0x1240 -#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR 0x1260 -#define S5P_XUSBXTI_LOWPWR 0x1280 -#define S5P_XXTI_LOWPWR 0x1284 -#define S5P_EXT_REGULATOR_LOWPWR 0x12C0 -#define S5P_GPIO_MODE_LOWPWR 0x1300 -#define S5P_GPIO_MODE_MAUDIO_LOWPWR 0x1340 -#define S5P_CAM_LOWPWR 0x1380 -#define S5P_TV_LOWPWR 0x1384 -#define S5P_MFC_LOWPWR 0x1388 -#define S5P_G3D_LOWPWR 0x138C -#define S5P_LCD0_LOWPWR 0x1390 -#define S5P_MAUDIO_LOWPWR 0x1398 -#define S5P_GPS_LOWPWR 0x139C -#define S5P_GPS_ALIVE_LOWPWR 0x13A0 - -#define EXYNOS_ARM_CORE0_CONFIGURATION 0x2000 -#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \ - (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) -#define EXYNOS_ARM_CORE_STATUS(_nr) \ - (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_ARM_CORE_OPTION(_nr) \ - (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_ARM_COMMON_CONFIGURATION 0x2500 -#define EXYNOS_COMMON_CONFIGURATION(_nr) \ - (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr))) -#define EXYNOS_COMMON_STATUS(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_COMMON_OPTION(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_CORE_LOCAL_PWR_EN 0x3 - -#define EXYNOS_ARM_COMMON_STATUS 0x2504 -#define EXYNOS_COMMON_OPTION(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_ARM_L2_CONFIGURATION 0x2600 -#define EXYNOS_L2_CONFIGURATION(_nr) \ - (EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80)) -#define EXYNOS_L2_STATUS(_nr) \ - (EXYNOS_L2_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_L2_OPTION(_nr) \ - (EXYNOS_L2_CONFIGURATION(_nr) + 0x8) -#define EXYNOS_L2_COMMON_PWR_EN 0x3 - -#define EXYNOS_ARM_CORE_X_STATUS_OFFSET 0x4 - -#define EXYNOS5_APLL_SYSCLK_CONFIGURATION 0x2A00 -#define EXYNOS5_APLL_SYSCLK_STATUS 0x2A04 - -#define EXYNOS5_ARM_L2_OPTION 0x2608 -#define EXYNOS5_USE_RETENTION BIT(4) - -#define EXYNOS5_L2RSTDISABLE_VALUE BIT(3) - -#define S5P_PAD_RET_MAUDIO_OPTION 0x3028 -#define S5P_PAD_RET_MMC2_OPTION 0x30c8 -#define S5P_PAD_RET_GPIO_OPTION 0x3108 -#define S5P_PAD_RET_UART_OPTION 0x3128 -#define S5P_PAD_RET_MMCA_OPTION 0x3148 -#define S5P_PAD_RET_MMCB_OPTION 0x3168 -#define S5P_PAD_RET_EBIA_OPTION 0x3188 -#define S5P_PAD_RET_EBIB_OPTION 0x31A8 -#define S5P_PAD_RET_SPI_OPTION 0x31c8 - -#define S5P_PS_HOLD_CONTROL 0x330C -#define S5P_PS_HOLD_EN (1 << 31) -#define S5P_PS_HOLD_OUTPUT_HIGH (3 << 8) - -#define S5P_CAM_OPTION 0x3C08 -#define S5P_MFC_OPTION 0x3C48 -#define S5P_G3D_OPTION 0x3C68 -#define S5P_LCD0_OPTION 0x3C88 -#define S5P_LCD1_OPTION 0x3CA8 -#define S5P_ISP_OPTION S5P_LCD1_OPTION - -#define S5P_CORE_LOCAL_PWR_EN 0x3 -#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8) -#define S5P_CORE_AUTOWAKEUP_EN (1 << 31) - -/* Only for EXYNOS4210 */ -#define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 -#define S5P_CMU_RESET_LCD1_LOWPWR 0x1174 -#define S5P_MODIMIF_MEM_LOWPWR 0x11C4 -#define S5P_PCIE_MEM_LOWPWR 0x11E0 -#define S5P_SATA_MEM_LOWPWR 0x11E4 -#define S5P_LCD1_LOWPWR 0x1394 - -/* Only for EXYNOS4x12 */ -#define S5P_ISP_ARM_LOWPWR 0x1050 -#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR 0x1054 -#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR 0x1058 -#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR 0x1110 -#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR 0x1114 -#define S5P_CMU_RESET_COREBLK_LOWPWR 0x111C -#define S5P_MPLLUSER_SYSCLK_LOWPWR 0x1130 -#define S5P_CMU_CLKSTOP_ISP_LOWPWR 0x1154 -#define S5P_CMU_RESET_ISP_LOWPWR 0x1174 -#define S5P_TOP_BUS_COREBLK_LOWPWR 0x1190 -#define S5P_TOP_RETENTION_COREBLK_LOWPWR 0x1194 -#define S5P_TOP_PWR_COREBLK_LOWPWR 0x1198 -#define S5P_OSCCLK_GATE_LOWPWR 0x11A4 -#define S5P_LOGIC_RESET_COREBLK_LOWPWR 0x11B0 -#define S5P_OSCCLK_GATE_COREBLK_LOWPWR 0x11B4 -#define S5P_HSI_MEM_LOWPWR 0x11C4 -#define S5P_ROTATOR_MEM_LOWPWR 0x11DC -#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR 0x123C -#define S5P_PAD_ISOLATION_COREBLK_LOWPWR 0x1250 -#define S5P_GPIO_MODE_COREBLK_LOWPWR 0x1320 -#define S5P_TOP_ASB_RESET_LOWPWR 0x1344 -#define S5P_TOP_ASB_ISOLATION_LOWPWR 0x1348 -#define S5P_ISP_LOWPWR 0x1394 -#define S5P_DRAM_FREQ_DOWN_LOWPWR 0x13B0 -#define S5P_DDRPHY_DLLOFF_LOWPWR 0x13B4 -#define S5P_CMU_SYSCLK_ISP_LOWPWR 0x13B8 -#define S5P_CMU_SYSCLK_GPS_LOWPWR 0x13BC -#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR 0x13C0 - -#define S5P_ARM_L2_0_OPTION 0x2608 -#define S5P_ARM_L2_1_OPTION 0x2628 -#define S5P_ONENAND_MEM_OPTION 0x2E08 -#define S5P_HSI_MEM_OPTION 0x2E28 -#define S5P_G2D_ACP_MEM_OPTION 0x2E48 -#define S5P_USBOTG_MEM_OPTION 0x2E68 -#define S5P_HSMMC_MEM_OPTION 0x2E88 -#define S5P_CSSYS_MEM_OPTION 0x2EA8 -#define S5P_SECSS_MEM_OPTION 0x2EC8 -#define S5P_ROTATOR_MEM_OPTION 0x2F48 - -/* Only for EXYNOS4412 */ -#define S5P_ARM_CORE2_LOWPWR 0x1020 -#define S5P_DIS_IRQ_CORE2 0x1024 -#define S5P_DIS_IRQ_CENTRAL2 0x1028 -#define S5P_ARM_CORE3_LOWPWR 0x1030 -#define S5P_DIS_IRQ_CORE3 0x1034 -#define S5P_DIS_IRQ_CENTRAL3 0x1038 - -/* Only for EXYNOS3XXX */ -#define EXYNOS3_ARM_CORE0_SYS_PWR_REG 0x1000 -#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004 -#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008 -#define EXYNOS3_ARM_CORE1_SYS_PWR_REG 0x1010 -#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014 -#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018 -#define EXYNOS3_ISP_ARM_SYS_PWR_REG 0x1050 -#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS3_ARM_COMMON_SYS_PWR_REG 0x1080 -#define EXYNOS3_ARM_L2_SYS_PWR_REG 0x10C0 -#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG 0x1100 -#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG 0x1104 -#define EXYNOS3_CMU_RESET_SYS_PWR_REG 0x110C -#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG 0x1110 -#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG 0x1114 -#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG 0x111C -#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG 0x1120 -#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG 0x1124 -#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG 0x1128 -#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG 0x112C -#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1130 -#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1134 -#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG 0x1138 -#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140 -#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148 -#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C -#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150 -#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1154 -#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158 -#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG 0x1160 -#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG 0x1168 -#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG 0x116C -#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG 0x1170 -#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG 0x1174 -#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178 -#define EXYNOS3_TOP_BUS_SYS_PWR_REG 0x1180 -#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG 0x1184 -#define EXYNOS3_TOP_PWR_SYS_PWR_REG 0x1188 -#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG 0x1190 -#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG 0x1194 -#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG 0x1198 -#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG 0x11A0 -#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG 0x11A4 -#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG 0x11B0 -#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG 0x11B4 -#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 -#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204 -#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG 0x1208 -#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1218 -#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 -#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG 0x1224 -#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1228 -#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG 0x122C -#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 -#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 -#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1238 -#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG 0x1240 -#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG 0x1260 -#define EXYNOS3_XUSBXTI_SYS_PWR_REG 0x1280 -#define EXYNOS3_XXTI_SYS_PWR_REG 0x1284 -#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG 0x12C0 -#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG 0x12C4 -#define EXYNOS3_GPIO_MODE_SYS_PWR_REG 0x1300 -#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340 -#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG 0x1344 -#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348 -#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG 0x1350 -#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG 0x1354 -#define EXYNOS3_CAM_SYS_PWR_REG 0x1380 -#define EXYNOS3_MFC_SYS_PWR_REG 0x1388 -#define EXYNOS3_G3D_SYS_PWR_REG 0x138C -#define EXYNOS3_LCD0_SYS_PWR_REG 0x1390 -#define EXYNOS3_ISP_SYS_PWR_REG 0x1394 -#define EXYNOS3_MAUDIO_SYS_PWR_REG 0x1398 -#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG 0x13B0 -#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG 0x13B4 -#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG 0x13B8 -#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG 0x13C0 -#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG 0x13C4 -#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG 0x13C8 - -#define EXYNOS3_ARM_CORE0_OPTION 0x2008 -#define EXYNOS3_ARM_CORE_OPTION(_nr) \ - (EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80)) - -#define EXYNOS3_ARM_COMMON_OPTION 0x2408 -#define EXYNOS3_ARM_L2_OPTION 0x2608 -#define EXYNOS3_TOP_PWR_OPTION 0x2C48 -#define EXYNOS3_CORE_TOP_PWR_OPTION 0x2CA8 -#define EXYNOS3_XUSBXTI_DURATION 0x341C -#define EXYNOS3_XXTI_DURATION 0x343C -#define EXYNOS3_EXT_REGULATOR_DURATION 0x361C -#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION 0x363C -#define XUSBXTI_DURATION 0x00000BB8 -#define XXTI_DURATION XUSBXTI_DURATION -#define EXT_REGULATOR_DURATION 0x00001D4C -#define EXT_REGULATOR_COREBLK_DURATION EXT_REGULATOR_DURATION - -/* for XXX_OPTION */ -#define EXYNOS3_OPTION_USE_SC_COUNTER (1 << 0) -#define EXYNOS3_OPTION_USE_SC_FEEDBACK (1 << 1) -#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7) - -/* For EXYNOS5 */ - -#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408 -#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C - -#define EXYNOS5_USE_RETENTION BIT(4) -#define EXYNOS5_SYS_WDTRESET (1 << 20) - -#define EXYNOS5_ARM_CORE0_SYS_PWR_REG 0x1000 -#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004 -#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008 -#define EXYNOS5_ARM_CORE1_SYS_PWR_REG 0x1010 -#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014 -#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018 -#define EXYNOS5_FSYS_ARM_SYS_PWR_REG 0x1040 -#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG 0x1048 -#define EXYNOS5_ISP_ARM_SYS_PWR_REG 0x1050 -#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS5_ARM_COMMON_SYS_PWR_REG 0x1080 -#define EXYNOS5_ARM_L2_SYS_PWR_REG 0x10C0 -#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG 0x1100 -#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG 0x1104 -#define EXYNOS5_CMU_RESET_SYS_PWR_REG 0x110C -#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG 0x1120 -#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG 0x1124 -#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG 0x112C -#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG 0x1130 -#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG 0x1134 -#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG 0x1138 -#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG 0x1140 -#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG 0x1144 -#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG 0x1148 -#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG 0x114C -#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG 0x1150 -#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG 0x1154 -#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1164 -#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1170 -#define EXYNOS5_TOP_BUS_SYS_PWR_REG 0x1180 -#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG 0x1184 -#define EXYNOS5_TOP_PWR_SYS_PWR_REG 0x1188 -#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG 0x1190 -#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG 0x1194 -#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG 0x1198 -#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG 0x11A0 -#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG 0x11A4 -#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG 0x11B0 -#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG 0x11B4 -#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG 0x11C0 -#define EXYNOS5_G2D_MEM_SYS_PWR_REG 0x11C8 -#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG 0x11CC -#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG 0x11D0 -#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG 0x11D4 -#define EXYNOS5_SECSS_MEM_SYS_PWR_REG 0x11D8 -#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG 0x11DC -#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG 0x11E0 -#define EXYNOS5_INTROM_MEM_SYS_PWR_REG 0x11E4 -#define EXYNOS5_JPEG_MEM_SYS_PWR_REG 0x11E8 -#define EXYNOS5_HSI_MEM_SYS_PWR_REG 0x11EC -#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG 0x11F4 -#define EXYNOS5_SATA_MEM_SYS_PWR_REG 0x11FC -#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 -#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG 0x1204 -#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG 0x1208 -#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 -#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG 0x1224 -#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228 -#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C -#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 -#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 -#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG 0x1238 -#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG 0x123C -#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG 0x1240 -#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG 0x1250 -#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG 0x1260 -#define EXYNOS5_XUSBXTI_SYS_PWR_REG 0x1280 -#define EXYNOS5_XXTI_SYS_PWR_REG 0x1284 -#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG 0x12C0 -#define EXYNOS5_GPIO_MODE_SYS_PWR_REG 0x1300 -#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG 0x1320 -#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG 0x1340 -#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG 0x1344 -#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348 -#define EXYNOS5_GSCL_SYS_PWR_REG 0x1400 -#define EXYNOS5_ISP_SYS_PWR_REG 0x1404 -#define EXYNOS5_MFC_SYS_PWR_REG 0x1408 -#define EXYNOS5_G3D_SYS_PWR_REG 0x140C -#define EXYNOS5_DISP1_SYS_PWR_REG 0x1414 -#define EXYNOS5_MAU_SYS_PWR_REG 0x1418 -#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG 0x1480 -#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1484 -#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1488 -#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x148C -#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1494 -#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1498 -#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG 0x14C0 -#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG 0x14C4 -#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG 0x14C8 -#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG 0x14CC -#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D4 -#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D8 -#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG 0x1580 -#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG 0x1584 -#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG 0x1588 -#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG 0x158C -#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG 0x1594 -#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG 0x1598 - -#define EXYNOS5_ARM_CORE0_OPTION 0x2008 -#define EXYNOS5_ARM_CORE1_OPTION 0x2088 -#define EXYNOS5_FSYS_ARM_OPTION 0x2208 -#define EXYNOS5_ISP_ARM_OPTION 0x2288 -#define EXYNOS5_ARM_COMMON_OPTION 0x2408 -#define EXYNOS5_ARM_L2_OPTION 0x2608 -#define EXYNOS5_TOP_PWR_OPTION 0x2C48 -#define EXYNOS5_TOP_PWR_SYSMEM_OPTION 0x2CC8 -#define EXYNOS5_JPEG_MEM_OPTION 0x2F48 -#define EXYNOS5_GSCL_OPTION 0x4008 -#define EXYNOS5_ISP_OPTION 0x4028 -#define EXYNOS5_MFC_OPTION 0x4048 -#define EXYNOS5_G3D_OPTION 0x4068 -#define EXYNOS5_DISP1_OPTION 0x40A8 -#define EXYNOS5_MAU_OPTION 0x40C8 - -#define EXYNOS5_USE_SC_FEEDBACK (1 << 1) -#define EXYNOS5_USE_SC_COUNTER (1 << 0) - -#define EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7) - -#define EXYNOS5_OPTION_USE_STANDBYWFE (1 << 24) -#define EXYNOS5_OPTION_USE_STANDBYWFI (1 << 16) - -#define EXYNOS5_OPTION_USE_RETENTION (1 << 4) - -#define EXYNOS5420_SWRESET_KFC_SEL 0x3 - -/* Only for EXYNOS5420 */ -#define EXYNOS5420_ISP_ARM_OPTION 0x2488 -#define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3) - -#define EXYNOS5420_LPI_MASK 0x0004 -#define EXYNOS5420_LPI_MASK1 0x0008 -#define EXYNOS5420_UFS BIT(8) -#define EXYNOS5420_ATB_KFC BIT(13) -#define EXYNOS5420_ATB_ISP_ARM BIT(19) -#define EXYNOS5420_EMULATION BIT(31) -#define ATB_ISP_ARM BIT(12) -#define ATB_KFC BIT(13) -#define ATB_NOC BIT(14) - -#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE 0x0100 -#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI 0x0104 -#define EXYNOS5420_UP_SCHEDULER 0x0120 -#define SPREAD_ENABLE 0xF -#define SPREAD_USE_STANDWFI 0xF - -#define EXYNOS5420_KFC_CORE_RESET0 BIT(8) -#define EXYNOS5420_KFC_ETM_RESET0 BIT(20) - -#define EXYNOS5420_KFC_CORE_RESET(_nr) \ - ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr)) - -#define EXYNOS5420_BB_CON1 0x0784 -#define EXYNOS5420_BB_SEL_EN BIT(31) -#define EXYNOS5420_BB_PMOS_EN BIT(7) -#define EXYNOS5420_BB_1300X 0XF - -#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020 -#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024 -#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028 -#define EXYNOS5420_ARM_CORE3_SYS_PWR_REG 0x1030 -#define EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG 0x1034 -#define EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG 0x1038 -#define EXYNOS5420_KFC_CORE0_SYS_PWR_REG 0x1040 -#define EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG 0x1044 -#define EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG 0x1048 -#define EXYNOS5420_KFC_CORE1_SYS_PWR_REG 0x1050 -#define EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS5420_KFC_CORE2_SYS_PWR_REG 0x1060 -#define EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG 0x1064 -#define EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG 0x1068 -#define EXYNOS5420_KFC_CORE3_SYS_PWR_REG 0x1070 -#define EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG 0x1074 -#define EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG 0x1078 -#define EXYNOS5420_ISP_ARM_SYS_PWR_REG 0x1090 -#define EXYNOS5420_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1094 -#define EXYNOS5420_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1098 -#define EXYNOS5420_ARM_COMMON_SYS_PWR_REG 0x10A0 -#define EXYNOS5420_KFC_COMMON_SYS_PWR_REG 0x10B0 -#define EXYNOS5420_KFC_L2_SYS_PWR_REG 0x10D0 -#define EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG 0x1158 -#define EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG 0x115C -#define EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG 0x1160 -#define EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG 0x1174 -#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG 0x1178 -#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG 0x11B8 -#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG 0x11BC -#define EXYNOS5420_ONENANDXL_MEM_SYS_PWR 0x11C0 -#define EXYNOS5420_USBDEV_MEM_SYS_PWR 0x11CC -#define EXYNOS5420_USBDEV1_MEM_SYS_PWR 0x11D0 -#define EXYNOS5420_SDMMC_MEM_SYS_PWR 0x11D4 -#define EXYNOS5420_CSSYS_MEM_SYS_PWR 0x11D8 -#define EXYNOS5420_SECSS_MEM_SYS_PWR 0x11DC -#define EXYNOS5420_ROTATOR_MEM_SYS_PWR 0x11E0 -#define EXYNOS5420_INTRAM_MEM_SYS_PWR 0x11E4 -#define EXYNOS5420_INTROM_MEM_SYS_PWR 0x11E8 -#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1208 -#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1210 -#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG 0x1214 -#define EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1218 -#define EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG 0x121C -#define EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1220 -#define EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG 0x1224 -#define EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1228 -#define EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG 0x122C -#define EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG 0x1230 -#define EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG 0x1234 -#define EXYNOS5420_DISP1_SYS_PWR_REG 0x1410 -#define EXYNOS5420_MAU_SYS_PWR_REG 0x1414 -#define EXYNOS5420_G2D_SYS_PWR_REG 0x1418 -#define EXYNOS5420_MSC_SYS_PWR_REG 0x141C -#define EXYNOS5420_FSYS_SYS_PWR_REG 0x1420 -#define EXYNOS5420_FSYS2_SYS_PWR_REG 0x1424 -#define EXYNOS5420_PSGEN_SYS_PWR_REG 0x1428 -#define EXYNOS5420_PERIC_SYS_PWR_REG 0x142C -#define EXYNOS5420_WCORE_SYS_PWR_REG 0x1430 -#define EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1490 -#define EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1494 -#define EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG 0x1498 -#define EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG 0x149C -#define EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG 0x14A0 -#define EXYNOS5420_CMU_CLKSTOP_FSYS2_SYS_PWR_REG 0x14A4 -#define EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG 0x14A8 -#define EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG 0x14AC -#define EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG 0x14B0 -#define EXYNOS5420_CMU_SYSCLK_TOPPWR_SYS_PWR_REG 0x14BC -#define EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D0 -#define EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D4 -#define EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG 0x14D8 -#define EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG 0x14DC -#define EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG 0x14E0 -#define EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG 0x14E4 -#define EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG 0x14E8 -#define EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG 0x14EC -#define EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG 0x14F0 -#define EXYNOS5420_CMU_SYSCLK_SYSMEM_TOPPWR_SYS_PWR_REG 0x14F4 -#define EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG 0x1570 -#define EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG 0x1574 -#define EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG 0x1578 -#define EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG 0x157C -#define EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG 0x1590 -#define EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG 0x1594 -#define EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG 0x1598 -#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG 0x159C -#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG 0x15A0 -#define EXYNOS5420_SFR_AXI_CGDIS1 0x15E4 -#define EXYNOS_ARM_CORE2_CONFIGURATION 0x2100 -#define EXYNOS5420_ARM_CORE2_OPTION 0x2108 -#define EXYNOS_ARM_CORE3_CONFIGURATION 0x2180 -#define EXYNOS5420_ARM_CORE3_OPTION 0x2188 -#define EXYNOS5420_ARM_COMMON_STATUS 0x2504 -#define EXYNOS5420_ARM_COMMON_OPTION 0x2508 -#define EXYNOS5420_KFC_COMMON_STATUS 0x2584 -#define EXYNOS5420_KFC_COMMON_OPTION 0x2588 -#define EXYNOS5420_LOGIC_RESET_DURATION3 0x2D1C - -#define EXYNOS5420_PAD_RET_GPIO_OPTION 0x30C8 -#define EXYNOS5420_PAD_RET_UART_OPTION 0x30E8 -#define EXYNOS5420_PAD_RET_MMCA_OPTION 0x3108 -#define EXYNOS5420_PAD_RET_MMCB_OPTION 0x3128 -#define EXYNOS5420_PAD_RET_MMCC_OPTION 0x3148 -#define EXYNOS5420_PAD_RET_HSI_OPTION 0x3168 -#define EXYNOS5420_PAD_RET_SPI_OPTION 0x31C8 -#define EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION 0x31E8 -#define EXYNOS_PAD_RET_DRAM_OPTION 0x3008 -#define EXYNOS_PAD_RET_MAUDIO_OPTION 0x3028 -#define EXYNOS_PAD_RET_JTAG_OPTION 0x3048 -#define EXYNOS_PAD_RET_GPIO_OPTION 0x3108 -#define EXYNOS_PAD_RET_UART_OPTION 0x3128 -#define EXYNOS_PAD_RET_MMCA_OPTION 0x3148 -#define EXYNOS_PAD_RET_MMCB_OPTION 0x3168 -#define EXYNOS_PAD_RET_EBIA_OPTION 0x3188 -#define EXYNOS_PAD_RET_EBIB_OPTION 0x31A8 - -#define EXYNOS_PS_HOLD_CONTROL 0x330C - -/* For SYS_PWR_REG */ -#define EXYNOS_SYS_PWR_CFG BIT(0) - -#define EXYNOS5420_MFC_CONFIGURATION 0x4060 -#define EXYNOS5420_MFC_STATUS 0x4064 -#define EXYNOS5420_MFC_OPTION 0x4068 -#define EXYNOS5420_G3D_CONFIGURATION 0x4080 -#define EXYNOS5420_G3D_STATUS 0x4084 -#define EXYNOS5420_G3D_OPTION 0x4088 -#define EXYNOS5420_DISP0_CONFIGURATION 0x40A0 -#define EXYNOS5420_DISP0_STATUS 0x40A4 -#define EXYNOS5420_DISP0_OPTION 0x40A8 -#define EXYNOS5420_DISP1_CONFIGURATION 0x40C0 -#define EXYNOS5420_DISP1_STATUS 0x40C4 -#define EXYNOS5420_DISP1_OPTION 0x40C8 -#define EXYNOS5420_MAU_CONFIGURATION 0x40E0 -#define EXYNOS5420_MAU_STATUS 0x40E4 -#define EXYNOS5420_MAU_OPTION 0x40E8 -#define EXYNOS5420_FSYS2_OPTION 0x4168 -#define EXYNOS5420_PSGEN_OPTION 0x4188 - -/* For EXYNOS_CENTRAL_SEQ_OPTION */ -#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0 BIT(16) -#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1 BUT(17) -#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0 BIT(24) -#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1 BIT(25) - -#define EXYNOS5420_ARM_USE_STANDBY_WFI0 BIT(4) -#define EXYNOS5420_ARM_USE_STANDBY_WFI1 BIT(5) -#define EXYNOS5420_ARM_USE_STANDBY_WFI2 BIT(6) -#define EXYNOS5420_ARM_USE_STANDBY_WFI3 BIT(7) -#define EXYNOS5420_KFC_USE_STANDBY_WFI0 BIT(8) -#define EXYNOS5420_KFC_USE_STANDBY_WFI1 BIT(9) -#define EXYNOS5420_KFC_USE_STANDBY_WFI2 BIT(10) -#define EXYNOS5420_KFC_USE_STANDBY_WFI3 BIT(11) -#define EXYNOS5420_ARM_USE_STANDBY_WFE0 BIT(16) -#define EXYNOS5420_ARM_USE_STANDBY_WFE1 BIT(17) -#define EXYNOS5420_ARM_USE_STANDBY_WFE2 BIT(18) -#define EXYNOS5420_ARM_USE_STANDBY_WFE3 BIT(19) -#define EXYNOS5420_KFC_USE_STANDBY_WFE0 BIT(20) -#define EXYNOS5420_KFC_USE_STANDBY_WFE1 BIT(21) -#define EXYNOS5420_KFC_USE_STANDBY_WFE2 BIT(22) -#define EXYNOS5420_KFC_USE_STANDBY_WFE3 BIT(23) - -#define DUR_WAIT_RESET 0xF - -#define EXYNOS5420_USE_STANDBY_WFI_ALL (EXYNOS5420_ARM_USE_STANDBY_WFI0 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI1 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI2 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI3 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI0 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI1 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI2 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI3) - -#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c index 0b04b6b0fa30..8ef1f3ee4e98 100644 --- a/arch/arm/mach-exynos/s5p-dev-mfc.c +++ b/arch/arm/mach-exynos/s5p-dev-mfc.c @@ -9,7 +9,6 @@ */ #include <linux/kernel.h> -#include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/memblock.h> diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index c169cc3049aa..fee2b003e662 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -24,6 +24,8 @@ #include <linux/of_address.h> #include <linux/err.h> #include <linux/regulator/machine.h> +#include <linux/soc/samsung/exynos-pmu.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -35,8 +37,6 @@ #include <plat/pm-common.h> #include "common.h" -#include "exynos-pmu.h" -#include "regs-pmu.h" #include "regs-srom.h" #define REG_TABLE_END (-1U) diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index 07152d00fc50..cbbdd84cf49a 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -68,7 +68,6 @@ config ARCH_NETWINDER select ISA select ISA_DMA select PCI - select VIRT_TO_BUS help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index 2478d9f4d92d..469a76ea0459 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -17,7 +17,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -227,5 +227,5 @@ void __init gemini_gpio_init(void) (void *)i); } - BUG_ON(gpiochip_add(&gemini_gpio_chip)); + BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL)); } diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index 16496a071ecb..cda330c93d61 100644 --- a/arch/arm/mach-imx/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -94,8 +94,8 @@ static void mxc_expio_irq_handler(struct irq_desc *desc) /* irq = gpio irq number */ desc->irq_data.chip->irq_mask(&desc->irq_data); - imr_val = __raw_readw(brd_io + INTR_MASK_REG); - int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + imr_val = imx_readw(brd_io + INTR_MASK_REG); + int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val; expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { @@ -117,17 +117,17 @@ static void expio_mask_irq(struct irq_data *d) u16 reg; u32 expio = d->hwirq; - reg = __raw_readw(brd_io + INTR_MASK_REG); + reg = imx_readw(brd_io + INTR_MASK_REG); reg |= (1 << expio); - __raw_writew(reg, brd_io + INTR_MASK_REG); + imx_writew(reg, brd_io + INTR_MASK_REG); } static void expio_ack_irq(struct irq_data *d) { u32 expio = d->hwirq; - __raw_writew(1 << expio, brd_io + INTR_RESET_REG); - __raw_writew(0, brd_io + INTR_RESET_REG); + imx_writew(1 << expio, brd_io + INTR_RESET_REG); + imx_writew(0, brd_io + INTR_RESET_REG); expio_mask_irq(d); } @@ -136,9 +136,9 @@ static void expio_unmask_irq(struct irq_data *d) u16 reg; u32 expio = d->hwirq; - reg = __raw_readw(brd_io + INTR_MASK_REG); + reg = imx_readw(brd_io + INTR_MASK_REG); reg &= ~(1 << expio); - __raw_writew(reg, brd_io + INTR_MASK_REG); + imx_writew(reg, brd_io + INTR_MASK_REG); } static struct irq_chip expio_irq_chip = { @@ -162,9 +162,9 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio) if (brd_io == NULL) return -ENOMEM; - if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || - (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || - (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { pr_info("3-Stack Debug board not detected\n"); iounmap(brd_io); brd_io = NULL; @@ -181,10 +181,10 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio) gpio_direction_input(intr_gpio); /* disable the interrupt and clear the status */ - __raw_writew(0, brd_io + INTR_MASK_REG); - __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); - __raw_writew(0, brd_io + INTR_RESET_REG); - __raw_writew(0x1F, brd_io + INTR_MASK_REG); + imx_writew(0, brd_io + INTR_MASK_REG); + imx_writew(0xFFFF, brd_io + INTR_RESET_REG); + imx_writew(0, brd_io + INTR_RESET_REG); + imx_writew(0x1F, brd_io + INTR_MASK_REG); irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); WARN_ON(irq_base < 0); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 15df34fbdf44..8973fae25436 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -2,7 +2,7 @@ menuconfig ARCH_MXC bool "Freescale i.MX family" depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M select ARCH_REQUIRE_GPIOLIB - select ARM_CPU_SUSPEND if PM + select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_IMX_GPT select GENERIC_IRQ_CHIP select PINCTRL @@ -511,6 +511,7 @@ config SOC_IMX53 config SOC_IMX6 bool + select ARM_CPU_SUSPEND if PM select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_GIC @@ -561,6 +562,7 @@ config SOC_IMX7D bool "i.MX7 Dual support" select PINCTRL_IMX7D select ARM_GIC + select HAVE_ARM_ARCH_TIMER select HAVE_IMX_ANATOP select HAVE_IMX_MMDC select HAVE_IMX_SRC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index fb689d813b09..9fbe624a5ef9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -3,7 +3,7 @@ obj-y := cpu.o system.o irq-common.o obj-$(CONFIG_SOC_IMX1) += mm-imx1.o obj-$(CONFIG_SOC_IMX21) += mm-imx21.o -obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o +obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 231bb250c571..649a84c251ad 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -129,7 +129,14 @@ void __init imx_init_revision_from_anatop(void) switch (digprog & 0xff) { case 0: - revision = IMX_CHIP_REVISION_1_0; + /* + * For i.MX6QP, most of the code for i.MX6Q can be resued, + * so internally, we identify it as i.MX6Q Rev 2.0 + */ + if (digprog >> 8 & 0x01) + revision = IMX_CHIP_REVISION_2_0; + else + revision = IMX_CHIP_REVISION_1_0; break; case 1: revision = IMX_CHIP_REVISION_1_1; @@ -151,7 +158,14 @@ void __init imx_init_revision_from_anatop(void) revision = IMX_CHIP_REVISION_1_5; break; default: - revision = IMX_CHIP_REVISION_UNKNOWN; + /* + * Fail back to return raw register value instead of 0xff. + * It will be easy to know version information in SOC if it + * can't be recognized by known version. And some chip's (i.MX7D) + * digprog value match linux version format, so it needn't map + * again and we can use register value directly. + */ + revision = digprog & 0xff; } mxc_set_cpu_type(digprog >> 16 & 0xff); diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 1a8932335b21..7fa176e792bd 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -66,12 +66,12 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type) return -EINVAL; if (irq < AVIC_NUM_IRQS / 2) { - irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); + irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); + imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); } else { irq -= AVIC_NUM_IRQS / 2; - irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); + irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); + imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); } return 0; @@ -94,8 +94,8 @@ static void avic_irq_suspend(struct irq_data *d) struct irq_chip_type *ct = gc->chip_types; int idx = d->hwirq >> 5; - avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask); - __raw_writel(gc->wake_active, avic_base + ct->regs.mask); + avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask); + imx_writel(gc->wake_active, avic_base + ct->regs.mask); } static void avic_irq_resume(struct irq_data *d) @@ -104,7 +104,7 @@ static void avic_irq_resume(struct irq_data *d) struct irq_chip_type *ct = gc->chip_types; int idx = d->hwirq >> 5; - __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); + imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); } #else @@ -140,7 +140,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) u32 nivector; do { - nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16; + nivector = imx_readl(avic_base + AVIC_NIVECSR) >> 16; if (nivector == 0xffff) break; @@ -164,16 +164,16 @@ void __init mxc_init_irq(void __iomem *irqbase) /* put the AVIC into the reset value with * all interrupts disabled */ - __raw_writel(0, avic_base + AVIC_INTCNTL); - __raw_writel(0x1f, avic_base + AVIC_NIMASK); + imx_writel(0, avic_base + AVIC_INTCNTL); + imx_writel(0x1f, avic_base + AVIC_NIMASK); /* disable all interrupts */ - __raw_writel(0, avic_base + AVIC_INTENABLEH); - __raw_writel(0, avic_base + AVIC_INTENABLEL); + imx_writel(0, avic_base + AVIC_INTENABLEH); + imx_writel(0, avic_base + AVIC_INTENABLEL); /* all IRQ no FIQ */ - __raw_writel(0, avic_base + AVIC_INTTYPEH); - __raw_writel(0, avic_base + AVIC_INTTYPEL); + imx_writel(0, avic_base + AVIC_INTTYPEH); + imx_writel(0, avic_base + AVIC_INTTYPEL); irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); WARN_ON(irq_base < 0); @@ -188,7 +188,7 @@ void __init mxc_init_irq(void __iomem *irqbase) /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) - __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); + imx_writel(0, avic_base + AVIC_NIPRIORITY(i)); set_handle_irq(avic_handle_irq); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 32b83f09da18..58a38464480d 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -66,6 +66,7 @@ void imx_gpc_check_dt(void); void imx_gpc_set_arm_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); +void imx25_pm_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index fe8d36f7e30e..8d2ae4091465 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -39,8 +39,7 @@ static int mx27_read_cpu_rev(void) * the silicon revision very early we read it here to * avoid any further hooks */ - val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR - + SYS_CHIP_ID)); + val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF); diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index fde1860a2521..3daf1959a2f0 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -39,7 +39,7 @@ static int mx31_read_cpu_rev(void) u32 i, srev; /* read SREV register from IIM module */ - srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); + srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); srev &= 0xff; for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index ec3aaa098c17..8a54234df23b 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -20,7 +20,7 @@ static int mx35_read_cpu_rev(void) { u32 rev; - rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); + rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: return IMX_CHIP_REVISION_1_0; diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 5b0f752d5507..6a96b7cf468f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -45,20 +45,20 @@ void __init imx_set_aips(void __iomem *base) * Set all MPROTx to be non-bufferable, trusted for R/W, * not forced to user-mode. */ - __raw_writel(0x77777777, base + 0x0); - __raw_writel(0x77777777, base + 0x4); + imx_writel(0x77777777, base + 0x0); + imx_writel(0x77777777, base + 0x4); /* * Set all OPACRx to be non-bufferable, to not require * supervisor privilege level for access, allow for * write access and untrusted master access. */ - __raw_writel(0x0, base + 0x40); - __raw_writel(0x0, base + 0x44); - __raw_writel(0x0, base + 0x48); - __raw_writel(0x0, base + 0x4C); - reg = __raw_readl(base + 0x50) & 0x00FFFFFF; - __raw_writel(reg, base + 0x50); + imx_writel(0x0, base + 0x40); + imx_writel(0x0, base + 0x44); + imx_writel(0x0, base + 0x48); + imx_writel(0x0, base + 0x4C); + reg = imx_readl(base + 0x50) & 0x00FFFFFF; + imx_writel(reg, base + 0x50); } void __init imx_aips_allow_unprivileged_access( diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c index 08ce20771bb3..fb9a73a57d00 100644 --- a/arch/arm/mach-imx/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -64,23 +64,23 @@ static inline void epit_irq_disable(void) { u32 val; - val = __raw_readl(timer_base + EPITCR); + val = imx_readl(timer_base + EPITCR); val &= ~EPITCR_OCIEN; - __raw_writel(val, timer_base + EPITCR); + imx_writel(val, timer_base + EPITCR); } static inline void epit_irq_enable(void) { u32 val; - val = __raw_readl(timer_base + EPITCR); + val = imx_readl(timer_base + EPITCR); val |= EPITCR_OCIEN; - __raw_writel(val, timer_base + EPITCR); + imx_writel(val, timer_base + EPITCR); } static void epit_irq_acknowledge(void) { - __raw_writel(EPITSR_OCIF, timer_base + EPITSR); + imx_writel(EPITSR_OCIF, timer_base + EPITSR); } static int __init epit_clocksource_init(struct clk *timer_clk) @@ -98,9 +98,9 @@ static int epit_set_next_event(unsigned long evt, { unsigned long tcmp; - tcmp = __raw_readl(timer_base + EPITCNR); + tcmp = imx_readl(timer_base + EPITCNR); - __raw_writel(tcmp - evt, timer_base + EPITCMPR); + imx_writel(tcmp - evt, timer_base + EPITCMPR); return 0; } @@ -213,11 +213,11 @@ void __init epit_timer_init(void __iomem *base, int irq) /* * Initialise to a known state (all timers off, and timing reset) */ - __raw_writel(0x0, timer_base + EPITCR); + imx_writel(0x0, timer_base + EPITCR); - __raw_writel(0xffffffff, timer_base + EPITLR); - __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, - timer_base + EPITCR); + imx_writel(0xffffffff, timer_base + EPITLR); + imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, + timer_base + EPITCR); /* init and register the timer to the framework */ epit_clocksource_init(timer_clk); diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index cfc696b972f3..fd8720532471 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -374,8 +374,13 @@ static struct pu_domain imx6q_pu_domain = { .name = "PU", .power_off = imx6q_pm_pu_power_off, .power_on = imx6q_pm_pu_power_on, - .power_off_latency_ns = 25000, - .power_on_latency_ns = 2000000, + .states = { + [0] = { + .power_off_latency_ns = 25000, + .power_on_latency_ns = 2000000, + }, + }, + .state_count = 1, }, }; diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index b5e976816b63..6c28d28b3c64 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> diag_reg_offset: .word g_diag_reg - . @@ -25,6 +26,7 @@ diag_reg_offset: .endm ENTRY(v7_secondary_startup) +ARM_BE8(setend be) @ go BE8 if entered LE set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 0b5ba4bf572a..3982e91b2f3e 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -57,10 +57,10 @@ void mxc_iomux_mode(unsigned int pin_mode) spin_lock(&gpio_mux_lock); - l = __raw_readl(reg); + l = imx_readl(reg); l &= ~(0xff << (field * 8)); l |= mode << (field * 8); - __raw_writel(l, reg); + imx_writel(l, reg); spin_unlock(&gpio_mux_lock); } @@ -82,10 +82,10 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) spin_lock(&gpio_mux_lock); - l = __raw_readl(reg); + l = imx_readl(reg); l &= ~(0x1ff << (field * 10)); l |= config << (field * 10); - __raw_writel(l, reg); + imx_writel(l, reg); spin_unlock(&gpio_mux_lock); } @@ -163,12 +163,12 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) u32 l; spin_lock(&gpio_mux_lock); - l = __raw_readl(IOMUXGPR); + l = imx_readl(IOMUXGPR); if (en) l |= gp; else l &= ~gp; - __raw_writel(l, IOMUXGPR); + imx_writel(l, IOMUXGPR); spin_unlock(&gpio_mux_lock); } diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index ecd543664644..7aa90c863ad9 100644 --- a/arch/arm/mach-imx/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c @@ -38,12 +38,12 @@ static unsigned imx_iomuxv1_numports; static inline unsigned long imx_iomuxv1_readl(unsigned offset) { - return __raw_readl(imx_iomuxv1_baseaddr + offset); + return imx_readl(imx_iomuxv1_baseaddr + offset); } static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) { - __raw_writel(val, imx_iomuxv1_baseaddr + offset); + imx_writel(val, imx_iomuxv1_baseaddr + offset); } static inline void imx_iomuxv1_rmwl(unsigned offset, diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index a53b2e64f98d..ca59d5f2ec92 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -45,13 +45,13 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; if (mux_ctrl_ofs) - __raw_writel(mux_mode, base + mux_ctrl_ofs); + imx_writel(mux_mode, base + mux_ctrl_ofs); if (sel_input_ofs) - __raw_writel(sel_input, base + sel_input_ofs); + imx_writel(sel_input, base + sel_input_ofs); if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) - __raw_writel(pad_ctrl, base + pad_ctrl_ofs); + imx_writel(pad_ctrl, base + pad_ctrl_ofs); return 0; } diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index f2060523ba48..eaee47a2fcc0 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -525,8 +525,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | - (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); + imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30), + mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c index 9379fd0a7b4d..32dcb5e99e23 100644 --- a/arch/arm/mach-imx/mach-imx25.c +++ b/arch/arm/mach-imx/mach-imx25.c @@ -41,6 +41,7 @@ static const char * const imx25_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .init_early = imx25_init_early, + .init_late = imx25_pm_init, .init_irq = mx25_init_irq, .dt_compat = imx25_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index b015129e4045..6883fbaf9484 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -40,11 +40,10 @@ static void __init imx51_ipu_mipi_setup(void) WARN_ON(!hsc_addr); /* setup MIPI module to legacy mode */ - __raw_writel(0xf00, hsc_addr); + imx_writel(0xf00, hsc_addr); /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ - __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff, - hsc_addr + 0x800); + imx_writel(imx_readl(hsc_addr + 0x800) | 0x30ff, hsc_addr + 0x800); iounmap(hsc_addr); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 3878494bd118..cb27d566d5ab 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -266,8 +266,11 @@ static void __init imx6q_init_machine(void) { struct device *parent; - imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", - imx_get_soc_revision()); + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0) + imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0); + else + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx_get_soc_revision()); parent = imx_soc_device_init(); if (parent == NULL) @@ -399,6 +402,7 @@ static void __init imx6q_init_irq(void) static const char * const imx6q_dt_compat[] __initconst = { "fsl,imx6dl", "fsl,imx6q", + "fsl,imx6qp", NULL, }; diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index eb1c3477c48a..a4c389eae31a 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -13,6 +13,8 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#include <linux/gpio/driver.h> +/* Needed for gpio_to_irq() */ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> @@ -202,9 +204,9 @@ static struct i2c_board_info mx27ads_i2c_devices[] = { static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value) { if (value) - __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); + imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); else - __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); + imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) @@ -243,7 +245,7 @@ static void __init mx27ads_regulator_init(void) vchip->ngpio = 1; vchip->direction_output = vgpio_dir_out; vchip->set = vgpio_set; - gpiochip_add(vchip); + gpiochip_add_data(vchip, NULL); platform_device_register_data(NULL, "reg-fixed-voltage", PLATFORM_DEVID_AUTO, @@ -364,7 +366,7 @@ static void __init mx27ads_timer_init(void) { unsigned long fref = 26000000; - if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) + if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) fref = 27000000; mx27_clocks_init(fref); diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 2b147e4bf9c9..4f2c56d44ba1 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -160,8 +160,8 @@ static void mx31ads_expio_irq_handler(struct irq_desc *desc) u32 int_valid; u32 expio_irq; - imr_val = __raw_readw(PBC_INTMASK_SET_REG); - int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val; + imr_val = imx_readw(PBC_INTMASK_SET_REG); + int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val; expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { @@ -180,8 +180,8 @@ static void expio_mask_irq(struct irq_data *d) { u32 expio = d->hwirq; /* mask the interrupt */ - __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG); - __raw_readw(PBC_INTMASK_CLEAR_REG); + imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG); + imx_readw(PBC_INTMASK_CLEAR_REG); } /* @@ -192,7 +192,7 @@ static void expio_ack_irq(struct irq_data *d) { u32 expio = d->hwirq; /* clear the interrupt status */ - __raw_writew(1 << expio, PBC_INTSTATUS_REG); + imx_writew(1 << expio, PBC_INTSTATUS_REG); } /* @@ -203,7 +203,7 @@ static void expio_unmask_irq(struct irq_data *d) { u32 expio = d->hwirq; /* unmask the interrupt */ - __raw_writew(1 << expio, PBC_INTMASK_SET_REG); + imx_writew(1 << expio, PBC_INTMASK_SET_REG); } static struct irq_chip expio_irq_chip = { @@ -226,8 +226,8 @@ static void __init mx31ads_init_expio(void) mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ - __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); - __raw_writew(0xFFFF, PBC_INTSTATUS_REG); + imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); + imx_writew(0xFFFF, PBC_INTSTATUS_REG); irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); WARN_ON(irq_base < 0); diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index bb6f8a52a6b8..4f2d99888afd 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -509,7 +509,7 @@ static void mx31moboard_poweroff(void) mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); - __raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); + imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); } static int mx31moboard_baseboard; diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 5c2764604727..34df64f133ed 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -190,9 +190,9 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); - __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); - __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index a5b1af6d7441..d32704256781 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -193,4 +193,9 @@ extern struct cpu_op *(*get_cpu_op)(int *op); #define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) #define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) +#define imx_readl readl_relaxed +#define imx_readw readw_relaxed +#define imx_writel writel_relaxed +#define imx_writew writew_relaxed + #endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c new file mode 100644 index 000000000000..8bba9fcd96f6 --- /dev/null +++ b/arch/arm/mach-imx/pm-imx25.c @@ -0,0 +1,37 @@ +/* + * Copyright 2016 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> + +static int imx25_suspend_enter(suspend_state_t state) +{ + if (!IS_ENABLED(CONFIG_PM)) + return 0; + + switch (state) { + case PM_SUSPEND_MEM: + cpu_do_idle(); + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct platform_suspend_ops imx25_suspend_ops = { + .enter = imx25_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +void __init imx25_pm_init(void) +{ + suspend_set_ops(&imx25_suspend_ops); +} diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 56d02d064fbf..43096c8990d4 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -19,9 +19,9 @@ static int mx27_suspend_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: /* Clear MPEN and SPEN to disable MPLL/SPLL */ - cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); cscr &= 0xFFFFFFFC; - __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); /* Executes WFI */ cpu_do_idle(); break; diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c index 6a07006ff0f4..94c0898751d8 100644 --- a/arch/arm/mach-imx/pm-imx3.c +++ b/arch/arm/mach-imx/pm-imx3.c @@ -22,14 +22,14 @@ */ void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode) { - int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR); + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); reg &= ~MXC_CCM_CCMR_LPM_MASK; switch (mode) { case MX3_WAIT: if (cpu_is_mx35()) reg |= MXC_CCM_CCMR_LPM_WAIT_MX35; - __raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); break; default: pr_err("Unknown cpu power mode: %d\n", mode); diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 532d4b08276d..868781fd460c 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -153,15 +153,15 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) int stop_mode = 0; /* always allow platform to issue a deep sleep mode request */ - plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) & + plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) & ~(MXC_CORTEXA8_PLAT_LPC_DSM); - ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) & + ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK); - arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) & + arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR); - empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) & + empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR); - empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) & + empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR); switch (mode) { @@ -196,17 +196,17 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) return; } - __raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC); - __raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR); - __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR); - __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR); + imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC); + imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR); + imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR); + imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR); if (stop_mode) { empgc0 |= MXC_SRPGCR_PCR; empgc1 |= MXC_SRPGCR_PCR; - __raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); + imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); } } @@ -228,8 +228,8 @@ static int mx5_suspend_enter(suspend_state_t state) flush_cache_all(); /*clear the EMPGC0/1 bits */ - __raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); + imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); if (imx5_suspend_in_ocram_fn) imx5_suspend_in_ocram_fn(suspend_ocram_base); diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 4470376af5f8..58924b3844df 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -561,13 +561,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) goto put_node; pl310_cache_map_failed: - iounmap(&pm_info->gpc_base.vbase); + iounmap(pm_info->gpc_base.vbase); gpc_map_failed: - iounmap(&pm_info->iomuxc_base.vbase); + iounmap(pm_info->iomuxc_base.vbase); iomuxc_map_failed: - iounmap(&pm_info->src_base.vbase); + iounmap(pm_info->src_base.vbase); src_map_failed: - iounmap(&pm_info->mmdc_base.vbase); + iounmap(pm_info->mmdc_base.vbase); put_node: of_node_put(node); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 45f7f4e0a447..70b083fe934a 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -73,7 +73,7 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev, return 0; } -static struct reset_control_ops imx_src_ops = { +static const struct reset_control_ops imx_src_ops = { .reset = imx_src_reset_module, }; diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 51c35013b673..105d1ce4ed9d 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -54,7 +54,7 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) wcr_enable = (1 << 2); /* Assert SRS signal */ - __raw_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); /* * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be * written twice), we add another two writes to ensure there must be at @@ -62,8 +62,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) * the target check here, since the writes shouldn't be a huge burden * for other platforms. */ - __raw_writew(wcr_enable, wdog_base); - __raw_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); /* wait for reset to assert... */ mdelay(500); @@ -106,6 +106,9 @@ void __init imx_init_l2cache(void) goto out; } + if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN) + goto skip_if_enabled; + /* Configure the L2 PREFETCH and POWER registers */ val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); val |= 0x70800000; @@ -122,6 +125,7 @@ void __init imx_init_l2cache(void) val &= ~(1 << 30 | 1 << 23); writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); +skip_if_enabled: iounmap(l2x0_base); of_node_put(np); diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 4de65eeda1eb..ae23d50f7861 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -65,10 +65,10 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) return -EINVAL; mask = 1U << (irq & 0x1F); - value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask; + value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask; if (type) value &= ~mask; - __raw_writel(value, tzic_base + TZIC_INTSEC0(index)); + imx_writel(value, tzic_base + TZIC_INTSEC0(index)); return 0; } @@ -82,15 +82,15 @@ static void tzic_irq_suspend(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); int idx = d->hwirq >> 5; - __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); + imx_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); } static void tzic_irq_resume(struct irq_data *d) { int idx = d->hwirq >> 5; - __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)), - tzic_base + TZIC_WAKEUP0(idx)); + imx_writel(imx_readl(tzic_base + TZIC_ENSET0(idx)), + tzic_base + TZIC_WAKEUP0(idx)); } #else @@ -135,8 +135,8 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) handled = 0; for (i = 0; i < 4; i++) { - stat = __raw_readl(tzic_base + TZIC_HIPND(i)) & - __raw_readl(tzic_base + TZIC_INTSEC0(i)); + stat = imx_readl(tzic_base + TZIC_HIPND(i)) & + imx_readl(tzic_base + TZIC_INTSEC0(i)); while (stat) { handled = 1; @@ -166,18 +166,18 @@ void __init tzic_init_irq(void) /* put the TZIC into the reset value with * all interrupts disabled */ - i = __raw_readl(tzic_base + TZIC_INTCNTL); + i = imx_readl(tzic_base + TZIC_INTCNTL); - __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL); - __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK); - __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL); + imx_writel(0x80010001, tzic_base + TZIC_INTCNTL); + imx_writel(0x1f, tzic_base + TZIC_PRIOMASK); + imx_writel(0x02, tzic_base + TZIC_SYNCCTRL); for (i = 0; i < 4; i++) - __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); + imx_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); /* disable all interrupts */ for (i = 0; i < 4; i++) - __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); + imx_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); /* all IRQ no FIQ Warning :: No selection */ @@ -214,13 +214,13 @@ int tzic_enable_wake(void) { unsigned int i; - __raw_writel(1, tzic_base + TZIC_DSMINT); - if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) + imx_writel(1, tzic_base + TZIC_DSMINT); + if (unlikely(imx_readl(tzic_base + TZIC_DSMINT) == 0)) return -EAGAIN; for (i = 0; i < 4; i++) - __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)), - tzic_base + TZIC_WAKEUP0(i)); + imx_writel(imx_readl(tzic_base + TZIC_ENSET0(i)), + tzic_base + TZIC_WAKEUP0(i)); return 0; } diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index b01bdc9baf89..b2a85ba13f08 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -2,22 +2,16 @@ menuconfig ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA - select ARM_PATCH_PHYS_VIRT if MMU - select AUTO_ZRELADDR - select COMMON_CLK select COMMON_CLK_VERSATILE - select GENERIC_CLOCKEVENTS select HAVE_TCM select ICST select MFD_SYSCON - select MULTI_IRQ_HANDLER select PLAT_VERSATILE select POWER_RESET select POWER_RESET_VERSATILE select POWER_SUPPLY select SOC_INTEGRATOR_CM select SPARSE_IRQ - select USE_OF select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. diff --git a/arch/arm/mach-integrator/Makefile.boot b/arch/arm/mach-integrator/Makefile.boot deleted file mode 100644 index ff0a4b5b0a82..000000000000 --- a/arch/arm/mach-integrator/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 1cb6f2f02880..26874f608ca9 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -27,7 +27,7 @@ #include <linux/clockchips.h> #include <linux/io.h> #include <linux/export.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <linux/cpu.h> #include <linux/pci.h> #include <linux/sched_clock.h> @@ -461,7 +461,7 @@ void __init ixp4xx_sys_init(void) platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); - gpiochip_add(&ixp4xx_gpio_chip); + gpiochip_add_data(&ixp4xx_gpio_chip, NULL); if (cpu_is_ixp46x()) { int region; diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index c5bae9c035d5..b7ddd27419c2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -395,204 +395,6 @@ #define CRP_AD_CBE_BESL 20 #define CRP_AD_CBE_WRITE 0x00010000 - -/* - * USB Device Controller - * - * These are used by the USB gadget driver, so they don't follow the - * IXP4XX_ naming convetions. - * - */ -# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x))) - -/* UDC Undocumented - Reserved1 */ -#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004) -/* UDC Undocumented - Reserved2 */ -#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008) -/* UDC Undocumented - Reserved3 */ -#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C) -/* UDC Control Register */ -#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) -/* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010) -/* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014) -/* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018) -/* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C) -/* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020) -/* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024) -/* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028) -/* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C) -/* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030) -/* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034) -/* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038) -/* UDC Endpoint 11 (IN) Control/Status Register */ -#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C) -/* UDC Endpoint 12 (OUT) Control/Status Register */ -#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040) -/* UDC Endpoint 13 (IN) Control/Status Register */ -#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044) -/* UDC Endpoint 14 (OUT) Control/Status Register */ -#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048) -/* UDC Endpoint 15 (Interrupt) Control/Status Register */ -#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C) -/* UDC Frame Number Register High */ -#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060) -/* UDC Frame Number Register Low */ -#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064) -/* UDC Byte Count Reg 2 */ -#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068) -/* UDC Byte Count Reg 4 */ -#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c) -/* UDC Byte Count Reg 7 */ -#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070) -/* UDC Byte Count Reg 9 */ -#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074) -/* UDC Byte Count Reg 12 */ -#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078) -/* UDC Byte Count Reg 14 */ -#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c) -/* UDC Endpoint 0 Data Register */ -#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080) -/* UDC Endpoint 1 Data Register */ -#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100) -/* UDC Endpoint 2 Data Register */ -#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180) -/* UDC Endpoint 3 Data Register */ -#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200) -/* UDC Endpoint 4 Data Register */ -#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400) -/* UDC Endpoint 5 Data Register */ -#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0) -/* UDC Endpoint 6 Data Register */ -#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600) -/* UDC Endpoint 7 Data Register */ -#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680) -/* UDC Endpoint 8 Data Register */ -#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700) -/* UDC Endpoint 9 Data Register */ -#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900) -/* UDC Endpoint 10 Data Register */ -#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0) -/* UDC Endpoint 11 Data Register */ -#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00) -/* UDC Endpoint 12 Data Register */ -#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80) -/* UDC Endpoint 13 Data Register */ -#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00) -/* UDC Endpoint 14 Data Register */ -#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00) -/* UDC Endpoint 15 Data Register */ -#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0) -/* UDC Interrupt Control Register 0 */ -#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050) -/* UDC Interrupt Control Register 1 */ -#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054) -/* UDC Status Interrupt Register 0 */ -#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058) -/* UDC Status Interrupt Register 1 */ -#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C) - -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ /* "fuse" bits of IXP_EXP_CFG2 */ diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot deleted file mode 100644 index f3835c43af61..000000000000 --- a/arch/arm/mach-keystone/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y := 0x80008000 diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index c279293f084c..e6b9cb1e6709 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -63,7 +63,7 @@ static void __init keystone_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static phys_addr_t keystone_virt_to_idmap(unsigned long x) +static unsigned long keystone_virt_to_idmap(unsigned long x) { return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START; } @@ -100,6 +100,7 @@ static const char *const keystone_match[] __initconst = { "ti,k2hk", "ti,k2e", "ti,k2l", + "ti,k2g", "ti,keystone", NULL, }; diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index 1f4f2f4f25bb..478ebd1f2b0f 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -80,7 +80,7 @@ static void __init og_pci_bus_reset(void) #define S8250_VIRT 0xf4000000 #define S8250_SIZE 0x00100000 -static struct __initdata map_desc og_io_desc[] = { +static struct map_desc og_io_desc[] __initdata = { { .virtual = S8250_VIRT, .pfn = __phys_to_pfn(S8250_PHYS), diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c index 474a050da85b..7a1c4caa1ab5 100644 --- a/arch/arm/mach-ks8695/cpu.c +++ b/arch/arm/mach-ks8695/cpu.c @@ -34,7 +34,7 @@ #include <mach/regs-misc.h> -static struct __initdata map_desc ks8695_io_desc[] = { +static struct map_desc ks8695_io_desc[] __initdata = { { .virtual = (unsigned long)KS8695_IO_VA, .pfn = __phys_to_pfn(KS8695_IO_PA), diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h index c089a1aea674..a001c7c34df2 100644 --- a/arch/arm/mach-ks8695/include/mach/uncompress.h +++ b/arch/arm/mach-ks8695/include/mach/uncompress.h @@ -17,7 +17,7 @@ #include <linux/io.h> #include <mach/regs-uart.h> -static void putc(char c) +static inline void putc(char c) { while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE)) barrier(); diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index f5db805ab958..c70709ada692 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -2,7 +2,6 @@ # Makefile for the linux kernel. # -obj-y := timer.o irq.o common.o serial.o clock.o +obj-y := irq.o common.o serial.o obj-y += pm.o suspend.o obj-y += phy3250.o - diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c deleted file mode 100644 index 661c8f4b2310..000000000000 --- a/arch/arm/mach-lpc32xx/clock.c +++ /dev/null @@ -1,1284 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/clock.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * LPC32xx clock management driver overview - * - * The LPC32XX contains a number of high level system clocks that can be - * generated from different sources. These system clocks are used to - * generate the CPU and bus rates and the individual peripheral clocks in - * the system. When Linux is started by the boot loader, the system - * clocks are already running. Stopping a system clock during normal - * Linux operation should never be attempted, as peripherals that require - * those clocks will quit working (ie, DRAM). - * - * The LPC32xx high level clock tree looks as follows. Clocks marked with - * an asterisk are always on and cannot be disabled. Clocks marked with - * an ampersand can only be disabled in CPU suspend mode. Clocks marked - * with a caret are always on if it is the selected clock for the SYSCLK - * source. The clock that isn't used for SYSCLK can be enabled and - * disabled normally. - * 32KHz oscillator* - * / | \ - * RTC* PLL397^ TOUCH - * / - * Main oscillator^ / - * | \ / - * | SYSCLK& - * | \ - * | \ - * USB_PLL HCLK_PLL& - * | | | - * USB host/device PCLK& | - * | | - * Peripherals - * - * The CPU and chip bus rates are derived from the HCLK PLL, which can - * generate various clock rates up to 266MHz and beyond. The internal bus - * rates (PCLK and HCLK) are generated from dividers based on the HCLK - * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate, - * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high - * level clocks are based on either HCLK or PCLK, but have their own - * dividers as part of the IP itself. Because of this, the system clock - * rates should not be changed. - * - * The HCLK PLL is clocked from SYSCLK, which can be derived from the - * main oscillator or PLL397. PLL397 generates a rate that is 397 times - * the 32KHz oscillator rate. The main oscillator runs at the selected - * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate - * is normally 13MHz, but depends on the selection of external crystals - * or oscillators. If USB operation is required, the main oscillator must - * be used in the system. - * - * Switching SYSCLK between sources during normal Linux operation is not - * supported. SYSCLK is preset in the bootloader. Because of the - * complexities of clock management during clock frequency changes, - * there are some limitations to the clock driver explained below: - * - The PLL397 and main oscillator can be enabled and disabled by the - * clk_enable() and clk_disable() functions unless SYSCLK is based - * on that clock. This allows the other oscillator that isn't driving - * the HCLK PLL to be used as another system clock that can be routed - * to an external pin. - * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with - * this driver. - * - HCLK and PCLK rates cannot be changed as part of this driver. - * - Most peripherals have their own dividers are part of the peripheral - * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates - * will also impact the individual peripheral rates. - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "clock.h" -#include "common.h" - -static DEFINE_SPINLOCK(global_clkregs_lock); - -static int usb_pll_enable, usb_pll_valid; - -static struct clk clk_armpll; -static struct clk clk_usbpll; - -/* - * Post divider values for PLLs based on selected register value - */ -static const u32 pll_postdivs[4] = {1, 2, 4, 8}; - -static unsigned long local_return_parent_rate(struct clk *clk) -{ - /* - * If a clock has a rate of 0, then it inherits it's parent - * clock rate - */ - while (clk->rate == 0) - clk = clk->parent; - - return clk->rate; -} - -/* 32KHz clock has a fixed rate and is not stoppable */ -static struct clk osc_32KHz = { - .rate = LPC32XX_CLOCK_OSC_FREQ, - .get_rate = local_return_parent_rate, -}; - -static int local_pll397_enable(struct clk *clk, int enable) -{ - u32 reg; - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL); - - if (enable == 0) { - reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; - __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); - } else { - /* Enable PLL397 */ - reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; - __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); - - /* Wait for PLL397 lock */ - while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & - LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) && - time_before(jiffies, timeout)) - cpu_relax(); - - if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & - LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) - return -ENODEV; - } - - return 0; -} - -static int local_oscmain_enable(struct clk *clk, int enable) -{ - u32 reg; - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL); - - if (enable == 0) { - reg |= LPC32XX_CLKPWR_MOSC_DISABLE; - __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); - } else { - /* Enable main oscillator */ - reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE; - __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); - - /* Wait for main oscillator to start */ - while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & - LPC32XX_CLKPWR_MOSC_DISABLE) != 0) && - time_before(jiffies, timeout)) - cpu_relax(); - - if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & - LPC32XX_CLKPWR_MOSC_DISABLE) != 0) - return -ENODEV; - } - - return 0; -} - -static struct clk osc_pll397 = { - .parent = &osc_32KHz, - .enable = local_pll397_enable, - .rate = LPC32XX_CLOCK_OSC_FREQ * 397, - .get_rate = local_return_parent_rate, -}; - -static struct clk osc_main = { - .enable = local_oscmain_enable, - .rate = LPC32XX_MAIN_OSC_FREQ, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_sys; - -/* - * Convert a PLL register value to a PLL output frequency - */ -u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval) -{ - struct clk_pll_setup pllcfg; - - pllcfg.cco_bypass_b15 = 0; - pllcfg.direct_output_b14 = 0; - pllcfg.fdbk_div_ctrl_b13 = 0; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0) - pllcfg.cco_bypass_b15 = 1; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0) - pllcfg.direct_output_b14 = 1; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0) - pllcfg.fdbk_div_ctrl_b13 = 1; - pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF); - pllcfg.pll_n = 1 + ((regval >> 9) & 0x3); - pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)]; - - return clk_check_pll_setup(inputclk, &pllcfg); -} - -/* - * Setup the HCLK PLL with a PLL structure - */ -static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup) -{ - u32 tv, tmp = 0; - - if (PllSetup->analog_on != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP; - if (PllSetup->cco_bypass_b15 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS; - if (PllSetup->direct_output_b14 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS; - if (PllSetup->fdbk_div_ctrl_b13 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK; - - tv = ffs(PllSetup->pll_p) - 1; - if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3)) - return 0; - - tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv); - tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1); - tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1); - - return tmp; -} - -/* - * Update the ARM core PLL frequency rate variable from the actual PLL setting - */ -static void local_update_armpll_rate(void) -{ - u32 clkin, pllreg; - - clkin = clk_armpll.parent->rate; - pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; - - clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg); -} - -/* - * Find a PLL configuration for the selected input frequency - */ -static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq, - struct clk_pll_setup *pllsetup) -{ - u32 ifreq, freqtol, m, n, p, fclkout; - - /* Determine frequency tolerance limits */ - freqtol = target_freq / 250; - ifreq = pllin_freq; - - /* Is direct bypass mode possible? */ - if (abs(pllin_freq - target_freq) <= freqtol) { - pllsetup->analog_on = 0; - pllsetup->cco_bypass_b15 = 1; - pllsetup->direct_output_b14 = 1; - pllsetup->fdbk_div_ctrl_b13 = 1; - pllsetup->pll_p = pll_postdivs[0]; - pllsetup->pll_n = 1; - pllsetup->pll_m = 1; - return clk_check_pll_setup(ifreq, pllsetup); - } else if (target_freq <= ifreq) { - pllsetup->analog_on = 0; - pllsetup->cco_bypass_b15 = 1; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 1; - pllsetup->pll_n = 1; - pllsetup->pll_m = 1; - for (p = 0; p <= 3; p++) { - pllsetup->pll_p = pll_postdivs[p]; - fclkout = clk_check_pll_setup(ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - - /* Is direct mode possible? */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 1; - pllsetup->fdbk_div_ctrl_b13 = 0; - pllsetup->pll_p = pll_postdivs[0]; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - /* Compute output frequency for this value */ - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup(ifreq, - pllsetup); - if (abs(target_freq - fclkout) <= - freqtol) - return fclkout; - } - } - - /* Is integer mode possible? */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 1; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - for (p = 0; p < 4; p++) { - /* Compute output frequency */ - pllsetup->pll_p = pll_postdivs[p]; - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup( - ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - } - - /* Try non-integer mode */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 0; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - for (p = 0; p < 4; p++) { - /* Compute output frequency */ - pllsetup->pll_p = pll_postdivs[p]; - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup( - ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - } - - return 0; -} - -static struct clk clk_armpll = { - .parent = &clk_sys, - .get_rate = local_return_parent_rate, -}; - -/* - * Setup the USB PLL with a PLL structure - */ -static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup) -{ - u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF; - reg |= tmp; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - return clk_check_pll_setup(clk_usbpll.parent->rate, - pHCLKPllSetup); -} - -static int local_usbpll_enable(struct clk *clk, int enable) -{ - u32 reg; - int ret = 0; - unsigned long timeout = jiffies + msecs_to_jiffies(20); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - - __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 | - LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), - LPC32XX_CLKPWR_USB_CTRL); - __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1, - LPC32XX_CLKPWR_USB_CTRL); - - if (enable && usb_pll_valid && usb_pll_enable) { - ret = -ENODEV; - /* - * If the PLL rate has been previously set, then the rate - * in the PLL register is valid and can be enabled here. - * Otherwise, it needs to be enabled as part of setrate. - */ - - /* - * Gate clock into PLL - */ - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - /* - * Enable PLL - */ - reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - /* - * Wait for PLL to lock - */ - while (time_before(jiffies, timeout) && (ret == -ENODEV)) { - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) - ret = 0; - else - udelay(10); - } - - /* - * Gate clock from PLL if PLL is locked - */ - if (ret == 0) { - __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2, - LPC32XX_CLKPWR_USB_CTRL); - } else { - __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | - LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), - LPC32XX_CLKPWR_USB_CTRL); - } - } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) { - usb_pll_valid = 0; - usb_pll_enable = 0; - } - - return ret; -} - -static unsigned long local_usbpll_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 clkin, usbdiv; - struct clk_pll_setup pllsetup; - - /* - * Unlike other clocks, this clock has a KHz input rate, so bump - * it up to work with the PLL function - */ - rate = rate * 1000; - - clkin = clk->get_rate(clk); - usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & - LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; - clkin = clkin / usbdiv; - - /* Try to find a good rate setup */ - if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) - return 0; - - return clk_check_pll_setup(clkin, &pllsetup); -} - -static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -ENODEV; - u32 clkin, usbdiv; - struct clk_pll_setup pllsetup; - - /* - * Unlike other clocks, this clock has a KHz input rate, so bump - * it up to work with the PLL function - */ - rate = rate * 1000; - - clkin = clk->get_rate(clk->parent); - usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & - LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; - clkin = clkin / usbdiv; - - /* Try to find a good rate setup */ - if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) - return -EINVAL; - - /* - * Disable PLL clocks during PLL change - */ - local_usbpll_enable(clk, 0); - pllsetup.analog_on = 0; - local_clk_usbpll_setup(&pllsetup); - - /* - * Start USB PLL and check PLL status - */ - - usb_pll_valid = 1; - usb_pll_enable = 1; - - ret = local_usbpll_enable(clk, 1); - if (ret >= 0) - clk->rate = clk_check_pll_setup(clkin, &pllsetup); - - return ret; -} - -static struct clk clk_usbpll = { - .parent = &osc_main, - .set_rate = local_usbpll_set_rate, - .enable = local_usbpll_enable, - .rate = 48000, /* In KHz */ - .get_rate = local_return_parent_rate, - .round_rate = local_usbpll_round_rate, -}; - -static u32 clk_get_hclk_div(void) -{ - static const u32 hclkdivs[4] = {1, 2, 4, 4}; - return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW( - __raw_readl(LPC32XX_CLKPWR_HCLK_DIV))]; -} - -static struct clk clk_hclk = { - .parent = &clk_armpll, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_pclk = { - .parent = &clk_armpll, - .get_rate = local_return_parent_rate, -}; - -static int local_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - tmp = __raw_readl(clk->enable_reg); - - if (enable == 0) - tmp &= ~clk->enable_mask; - else - tmp |= clk->enable_mask; - - __raw_writel(tmp, clk->enable_reg); - - return 0; -} - -/* Peripheral clock sources */ -static struct clk clk_timer0 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer1 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer2 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer3 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_mpwm = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_wdt = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMER_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_PWMCLK_WDOG_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_vfp9 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_DEBUG_CTRL, - .enable_mask = LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_dma = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_DMA_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_pwm = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN | - LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK | - LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) | - LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN | - LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK | - LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1), - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart3 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart4 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart5 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart6 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c2 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = io_p2v(LPC32XX_USB_BASE + 0xFF4), - .enable_mask = 0x4, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_ssp0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_ssp1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_kscan = { - .parent = &osc_32KHz, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_KEY_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_nand = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN | - LPC32XX_CLKPWR_NANDCLK_SEL_SLC, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_nand_mlc = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN | - LPC32XX_CLKPWR_NANDCLK_DMA_INT | - LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2s0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2s1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN | - LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_net = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_MACCLK_CTRL, - .enable_mask = (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN | - LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN | - LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN), - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_rtc = { - .parent = &osc_32KHz, - .rate = 1, /* 1 Hz */ - .get_rate = local_return_parent_rate, -}; - -static int local_usb_enable(struct clk *clk, int enable) -{ - u32 tmp; - - if (enable) { - /* Set up I2C pull levels */ - tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); - tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE; - __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); - } - - return local_onoff_enable(clk, enable); -} - -static struct clk clk_usbd = { - .parent = &clk_usbpll, - .enable = local_usb_enable, - .enable_reg = LPC32XX_CLKPWR_USB_CTRL, - .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN, - .get_rate = local_return_parent_rate, -}; - -#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \ - LPC32XX_USB_OTG_I2C_CLOCK_ON) - -static int local_usb_otg_enable(struct clk *clk, int enable) -{ - int to = 1000; - - if (enable) { - __raw_writel(clk->enable_mask, clk->enable_reg); - - while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & - clk->enable_mask) != clk->enable_mask) && (to > 0)) - to--; - } else { - __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg); - - while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & - OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0)) - to--; - } - - if (to) - return 0; - else - return -1; -} - -static struct clk clk_usb_otg_dev = { - .parent = &clk_usbpll, - .enable = local_usb_otg_enable, - .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, - .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | - LPC32XX_USB_OTG_OTG_CLOCK_ON | - LPC32XX_USB_OTG_DEV_CLOCK_ON | - LPC32XX_USB_OTG_I2C_CLOCK_ON, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_usb_otg_host = { - .parent = &clk_usbpll, - .enable = local_usb_otg_enable, - .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, - .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | - LPC32XX_USB_OTG_OTG_CLOCK_ON | - LPC32XX_USB_OTG_HOST_CLOCK_ON | - LPC32XX_USB_OTG_I2C_CLOCK_ON, - .get_rate = local_return_parent_rate, -}; - -static int tsc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - /* Make sure 32KHz clock is the selected clock */ - tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; - __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - - if (enable == 0) - __raw_writel(0, clk->enable_reg); - else - __raw_writel(clk->enable_mask, clk->enable_reg); - - return 0; -} - -static struct clk clk_tsc = { - .parent = &osc_32KHz, - .enable = tsc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static int adc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - u32 divider; - - /* Use PERIPH_CLOCK */ - tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; - /* - * Set clock divider so that we have equal to or less than - * 4.5MHz clock at ADC - */ - divider = clk->get_rate(clk) / 4500000 + 1; - tmp |= divider; - __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - - /* synchronize rate of this clock w/ actual HW setting */ - clk->rate = clk->get_rate(clk->parent) / divider; - - if (enable == 0) - __raw_writel(0, clk->enable_reg); - else - __raw_writel(clk->enable_mask, clk->enable_reg); - - return 0; -} - -static struct clk clk_adc = { - .parent = &clk_pclk, - .enable = adc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static int mmc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS); - - /* If rate is 0, disable clock */ - if (enable != 0) - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN; - - __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - - return 0; -} - -static unsigned long mmc_get_rate(struct clk *clk) -{ - u32 div, rate, oldclk; - - /* The MMC clock must be on when accessing an MMC register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN, - LPC32XX_CLKPWR_MS_CTRL); - div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL); - - /* Get the parent clock rate */ - rate = clk->parent->get_rate(clk->parent); - - /* Get the MMC controller clock divider value */ - div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - - if (!div) - div = 1; - - return rate / div; -} - -static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long div, prate; - - /* Get the parent clock rate */ - prate = clk->parent->get_rate(clk->parent); - - if (rate >= prate) - return prate; - - div = prate / rate; - if (div > 0xf) - div = 0xf; - - return prate / div; -} - -static int mmc_set_rate(struct clk *clk, unsigned long rate) -{ - u32 tmp; - unsigned long prate, div, crate = mmc_round_rate(clk, rate); - - prate = clk->parent->get_rate(clk->parent); - - div = prate / crate; - - /* The MMC clock must be on when accessing an MMC register */ - tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) | - LPC32XX_CLKPWR_MSCARD_SDCARD_EN; - __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - - return 0; -} - -static struct clk clk_mmc = { - .parent = &clk_armpll, - .set_rate = mmc_set_rate, - .get_rate = mmc_get_rate, - .round_rate = mmc_round_rate, - .enable = mmc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_MS_CTRL, - .enable_mask = LPC32XX_CLKPWR_MSCARD_SDCARD_EN, -}; - -static unsigned long clcd_get_rate(struct clk *clk) -{ - u32 tmp, div, rate, oldclk; - - /* The LCD clock must be on when accessing an LCD register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, - LPC32XX_CLKPWR_LCDCLK_CTRL); - tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); - __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); - - rate = clk->parent->get_rate(clk->parent); - - /* Only supports internal clocking */ - if (tmp & TIM2_BCD) - return rate; - - div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22); - tmp = rate / (2 + div); - - return tmp; -} - -static int clcd_set_rate(struct clk *clk, unsigned long rate) -{ - u32 tmp, prate, div, oldclk; - - /* The LCD clock must be on when accessing an LCD register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, - LPC32XX_CLKPWR_LCDCLK_CTRL); - - tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD; - prate = clk->parent->get_rate(clk->parent); - - if (rate < prate) { - /* Find closest divider */ - div = prate / rate; - if (div >= 2) { - div -= 2; - tmp &= ~TIM2_BCD; - } - - tmp &= ~(0xF800001F); - tmp |= (div & 0x1F); - tmp |= (((div >> 5) & 0x1F) << 27); - } - - __raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); - __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); - - return 0; -} - -static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate) -{ - u32 prate, div; - - prate = clk->parent->get_rate(clk->parent); - - if (rate >= prate) - rate = prate; - else { - div = prate / rate; - if (div > 0x3ff) - div = 0x3ff; - - rate = prate / div; - } - - return rate; -} - -static struct clk clk_lcd = { - .parent = &clk_hclk, - .set_rate = clcd_set_rate, - .get_rate = clcd_get_rate, - .round_rate = clcd_round_rate, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_LCDCLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN, -}; - -static void local_clk_disable(struct clk *clk) -{ - /* Don't attempt to disable clock if it has no users */ - if (clk->usecount > 0) { - clk->usecount--; - - /* Only disable clock when it has no more users */ - if ((clk->usecount == 0) && (clk->enable)) - clk->enable(clk, 0); - - /* Check parent clocks, they may need to be disabled too */ - if (clk->parent) - local_clk_disable(clk->parent); - } -} - -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - /* Enable parent clocks first and update use counts */ - if (clk->parent) - ret = local_clk_enable(clk->parent); - - if (!ret) { - /* Only enable clock if it's currently disabled */ - if ((clk->usecount == 0) && (clk->enable)) - ret = clk->enable(clk, 1); - - if (!ret) - clk->usecount++; - else if (clk->parent) - local_clk_disable(clk->parent); - } - - return ret; -} - -/* - * clk_enable - inform the system when the clock source should be running. - */ -int clk_enable(struct clk *clk) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&global_clkregs_lock, flags); - ret = local_clk_enable(clk); - spin_unlock_irqrestore(&global_clkregs_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* - * clk_disable - inform the system when the clock source is no longer required - */ -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&global_clkregs_lock, flags); - local_clk_disable(clk); - spin_unlock_irqrestore(&global_clkregs_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/* - * clk_get_rate - obtain the current clock rate (in Hz) for a clock source - */ -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->get_rate(clk); -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * clk_set_rate - set the clock rate for a clock source - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - /* - * Most system clocks can only be enabled or disabled, with - * the actual rate set as part of the peripheral dividers - * instead of high level clock control - */ - if (clk->set_rate) - ret = clk->set_rate(clk, rate); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* - * clk_round_rate - adjust a rate to the exact rate a clock can provide - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk->round_rate) - rate = clk->round_rate(clk, rate); - else - rate = clk->get_rate(clk); - - return rate; -} -EXPORT_SYMBOL(clk_round_rate); - -/* - * clk_set_parent - set the parent clock source for this clock - */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - /* Clock re-parenting is not supported */ - return -EINVAL; -} -EXPORT_SYMBOL(clk_set_parent); - -/* - * clk_get_parent - get the parent clock source for this clock - */ -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -static struct clk_lookup lookups[] = { - CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz), - CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397), - CLKDEV_INIT(NULL, "osc_main", &osc_main), - CLKDEV_INIT(NULL, "sys_ck", &clk_sys), - CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll), - CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll), - CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk), - CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk), - CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0), - CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1), - CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2), - CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3), - CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9), - CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), - CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), - CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), - CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm), - CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), - CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), - CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), - CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6), - CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0), - CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1), - CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2), - CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0), - CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1), - CLKDEV_INIT("40050000.key", NULL, &clk_kscan), - CLKDEV_INIT("20020000.flash", NULL, &clk_nand), - CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc), - CLKDEV_INIT("40048000.adc", NULL, &clk_adc), - CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0), - CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1), - CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc), - CLKDEV_INIT("20098000.sd", NULL, &clk_mmc), - CLKDEV_INIT("31060000.ethernet", NULL, &clk_net), - CLKDEV_INIT("dev:clcd", NULL, &clk_lcd), - CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd), - CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd), - CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev), - CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host), - CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc), -}; - -static int __init clk_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - /* - * Setup muxed SYSCLK for HCLK PLL base -this selects the - * parent clock used for the ARM PLL and is used to derive - * the many system clock rates in the device. - */ - if (clk_is_sysclk_mainosc() != 0) - clk_sys.parent = &osc_main; - else - clk_sys.parent = &osc_pll397; - - clk_sys.rate = clk_sys.parent->rate; - - /* Compute the current ARM PLL and USB PLL frequencies */ - local_update_armpll_rate(); - - /* Compute HCLK and PCLK bus rates */ - clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div(); - clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div(); - - /* - * Enable system clocks - this step is somewhat formal, as the - * clocks are already running, but it does get the clock data - * inline with the actual system state. Never disable these - * clocks as they will only stop if the system is going to sleep. - * In that case, the chip/system power management functions will - * handle clock gating. - */ - if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk)) - printk(KERN_ERR "Error enabling system HCLK and PCLK\n"); - - /* - * Timers 0 and 1 were enabled and are being used by the high - * resolution tick function prior to this driver being initialized. - * Tag them now as used. - */ - if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1)) - printk(KERN_ERR "Error enabling timer tick clocks\n"); - - return 0; -} -core_initcall(clk_init); - diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 716e83eb1db8..5b7a1e78c3a5 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -194,21 +194,6 @@ void __init lpc32xx_map_io(void) iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc)); } -void lpc23xx_restart(enum reboot_mode mode, const char *cmd) -{ - /* Make sure WDT clocks are enabled */ - __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, - LPC32XX_CLKPWR_TIMER_CLK_CTRL); - - /* Instant assert of RESETOUT_N with pulse length 1mS */ - __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18)); - __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC)); - - /* Wait for watchdog to reset system */ - while (1) - ; -} - static int __init lpc32xx_check_uid(void) { u32 uid[4]; diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 1cd8853b2f9b..2d90801ed1e1 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -30,7 +30,6 @@ extern void lpc32xx_timer_init(void); extern void __init lpc32xx_init_irq(void); extern void __init lpc32xx_map_io(void); extern void __init lpc32xx_serial_init(void); -extern void lpc23xx_restart(enum reboot_mode, const char *); /* diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 77d6b1bab278..b2f9e226febe 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -36,7 +36,6 @@ #include <linux/clk.h> #include <linux/mtd/lpc32xx_slc.h> #include <linux/mtd/lpc32xx_mlc.h> -#include <linux/platform_data/gpio-lpc32xx.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -48,13 +47,6 @@ #include "common.h" /* - * Mapped GPIOLIB GPIOs - */ -#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) -#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) -#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5) - -/* * AMBA LCD controller */ static struct clcd_panel conn_lcd_panel = { @@ -86,8 +78,8 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb) { dma_addr_t dma; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, - PANEL_SIZE, &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; @@ -97,59 +89,25 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb) fb->fb.fix.smem_len = PANEL_SIZE; fb->panel = &conn_lcd_panel; - if (gpio_request(LCD_POWER_GPIO, "LCD power")) - printk(KERN_ERR "Error requesting gpio %u", - LCD_POWER_GPIO); - else if (gpio_direction_output(LCD_POWER_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - LCD_POWER_GPIO); - - if (gpio_request(BKL_POWER_GPIO, "LCD backlight power")) - printk(KERN_ERR "Error requesting gpio %u", - BKL_POWER_GPIO); - else if (gpio_direction_output(BKL_POWER_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - BKL_POWER_GPIO); - return 0; } static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } static void lpc32xx_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); -} - -/* - * On some early LCD modules (1307.0), the backlight logic is inverted. - * For those board variants, swap the disable and enable states for - * BKL_POWER_GPIO. -*/ -static void clcd_disable(struct clcd_fb *fb) -{ - gpio_set_value(BKL_POWER_GPIO, 0); - gpio_set_value(LCD_POWER_GPIO, 0); -} - -static void clcd_enable(struct clcd_fb *fb) -{ - gpio_set_value(BKL_POWER_GPIO, 1); - gpio_set_value(LCD_POWER_GPIO, 1); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } static struct clcd_board lpc32xx_clcd_data = { .name = "Phytec LCD", .check = clcdfb_check, .decode = clcdfb_decode, - .disable = clcd_disable, - .enable = clcd_enable, .setup = lpc32xx_clcd_setup, .mmap = lpc32xx_clcd_mmap, .remove = lpc32xx_clcd_remove, @@ -188,20 +146,9 @@ static struct pl08x_platform_data pl08x_pd = { .mem_buses = PL08X_AHB1, }; -static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios) -{ - /* Only on and off are supported */ - if (ios->power_mode == MMC_POWER_OFF) - gpio_set_value(MMC_PWR_ENABLE_GPIO, 0); - else - gpio_set_value(MMC_PWR_ENABLE_GPIO, 1); - return 0; -} - static struct mmci_platform_data lpc32xx_mmci_data = { .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | MMC_VDD_33_34, - .ios_handler = mmc_handle_ios, }; static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { @@ -260,8 +207,6 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)") .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, - .init_time = lpc32xx_timer_init, .init_machine = lpc3250_machine_init, .dt_compat = lpc32xx_dt_compat, - .restart = lpc23xx_restart, MACHINE_END diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 05621a29fba2..1931229a1eaa 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -76,9 +76,6 @@ void __init lpc32xx_serial_init(void) unsigned int puart; int i, j; - /* UART clocks are off, let clock driver manage them */ - __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL); - for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { clk = clk_get(NULL, uartinit_data[i].uart_ck_name); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c deleted file mode 100644 index ff3499d1fb1a..000000000000 --- a/arch/arm/mach-lpc32xx/timer.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/timer.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2009 - 2010 NXP Semiconductors - * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven - * Ed Schouten <e.schouten@fontys.nl> - * Laurens Timmermans <l.timmermans@fontys.nl> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/time.h> -#include <linux/err.h> -#include <linux/clockchips.h> - -#include <asm/mach/time.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "common.h" - -static int lpc32xx_clkevt_next_event(unsigned long delta, - struct clock_event_device *dev) -{ - __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, - LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, - LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - - return 0; -} - -static int lpc32xx_shutdown(struct clock_event_device *evt) -{ - /* - * Disable the timer. When using oneshot, we must also - * disable the timer to wait for the first call to - * set_next_event(). - */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - return 0; -} - -static struct clock_event_device lpc32xx_clkevt = { - .name = "lpc32xx_clkevt", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = lpc32xx_clkevt_next_event, - .set_state_shutdown = lpc32xx_shutdown, - .set_state_oneshot = lpc32xx_shutdown, -}; - -static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &lpc32xx_clkevt; - - /* Clear match */ - __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), - LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction lpc32xx_timer_irq = { - .name = "LPC32XX Timer Tick", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = lpc32xx_timer_interrupt, -}; - -/* - * The clock management driver isn't initialized at this point, so the - * clocks need to be enabled here manually and then tagged as used in - * the clock driver initialization - */ -void __init lpc32xx_timer_init(void) -{ - u32 clkrate, pllreg; - - /* Enable timer clock */ - __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN | - LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, - LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1); - - /* - * The clock driver isn't initialized at this point. So determine if - * the SYSCLK is driven from the PLL397 or main oscillator and then use - * it to compute the PLL frequency and the PCLK divider to get the base - * timer rates. This rate is needed to compute the tick rate. - */ - if (clk_is_sysclk_mainosc() != 0) - clkrate = LPC32XX_MAIN_OSC_FREQ; - else - clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ; - - /* Get ARM HCLKPLL register and convert it into a frequency */ - pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; - clkrate = clk_get_pllrate_from_reg(clkrate, pllreg); - - /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */ - clkrate = clkrate / clk_get_pclk_div(); - - /* Initial timer setup */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), - LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) | - LPC32XX_TIMER_CNTR_MCR_STOP(0) | - LPC32XX_TIMER_CNTR_MCR_RESET(0), - LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); - - /* Setup tick interrupt */ - setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); - - /* Setup the clockevent structure. */ - lpc32xx_clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1); - - /* Use timer1 as clock source. */ - __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, - LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, - LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - - clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE), - "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up); -} diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 0abcc51afff5..8ced4ad94af0 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -18,6 +18,10 @@ config MACH_MT6592 bool "MediaTek MT6592 SoCs support" default ARCH_MEDIATEK +config MACH_MT7623 + bool "MediaTek MT7623 SoCs support" + default ARCH_MEDIATEK + config MACH_MT8127 bool "MediaTek MT8127 SoCs support" default ARCH_MEDIATEK diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index 2f9f09ac51bd..9c2e38d30f47 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -47,6 +47,7 @@ static const char * const mediatek_board_dt_compat[] = { "mediatek,mt2701", "mediatek,mt6589", "mediatek,mt6592", + "mediatek,mt7623", "mediatek,mt8127", "mediatek,mt8135", NULL, diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c index a1b07eeaaf5b..b821e34474b6 100644 --- a/arch/arm/mach-mediatek/platsmp.c +++ b/arch/arm/mach-mediatek/platsmp.c @@ -44,13 +44,21 @@ static const struct mtk_smp_boot_info mtk_mt6589_boot = { { 0x38, 0x3c, 0x40 }, }; +static const struct mtk_smp_boot_info mtk_mt7623_boot = { + 0x10202000, 0x34, + { 0x534c4131, 0x4c415332, 0x41534c33 }, + { 0x38, 0x3c, 0x40 }, +}; + static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot }, { .compatible = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot }, + { .compatible = "mediatek,mt2701", .data = &mtk_mt8135_tz_boot }, }; static const struct of_device_id mtk_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot }, + { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot }, }; static void __iomem *mtk_smp_base; diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot deleted file mode 100644 index 5edf03e2beed..000000000000 --- a/arch/arm/mach-mmp/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ - zreladdr-y += 0x00008000 diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index a32575fa3fba..c32f85559c65 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MV78XX0 - bool "Marvell MV78xx0" if ARCH_MULTI_V5 + bool "Marvell MV78xx0" + depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select MVEBU_MBUS diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-mv78xx0/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index a1a04df9c05c..99cc93900a24 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -405,9 +405,8 @@ void __init mv78xx0_init(void) printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); -#ifdef CONFIG_CACHE_FEROCEON_L2 - feroceon_l2_init(is_l2_writethrough()); -#endif + if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2)) + feroceon_l2_init(is_l2_writethrough()); /* Setup root of clk tree */ clk_init(); diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 64e3d2ce9a07..348044ea650c 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -3,7 +3,6 @@ menuconfig ARCH_MVEBU depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO - select GENERIC_IRQ_CHIP select PINCTRL select PLAT_ORION select SOC_BUS @@ -29,9 +28,11 @@ config MACH_ARMADA_370 bool "Marvell Armada 370 boards" depends on ARCH_MULTI_V7 select ARMADA_370_CLK + select ARMADA_370_XP_IRQ select CPU_PJ4B select MACH_MVEBU_V7 select PINCTRL_ARMADA_370 + select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 370 SoC with device tree. @@ -39,6 +40,7 @@ config MACH_ARMADA_370 config MACH_ARMADA_375 bool "Marvell Armada 375 boards" depends on ARCH_MULTI_V7 + select ARMADA_370_XP_IRQ select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC @@ -48,6 +50,7 @@ config MACH_ARMADA_375 select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 + select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 375 SoC with device tree. @@ -58,12 +61,14 @@ config MACH_ARMADA_38X select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC + select ARMADA_370_XP_IRQ select ARMADA_38X_CLK select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X + select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 380/385 SoC with device tree. @@ -72,6 +77,7 @@ config MACH_ARMADA_39X bool "Marvell Armada 39x boards" depends on ARCH_MULTI_V7 select ARM_GIC + select ARMADA_370_XP_IRQ select ARMADA_39X_CLK select CACHE_L2X0 select HAVE_ARM_SCU @@ -86,6 +92,7 @@ config MACH_ARMADA_39X config MACH_ARMADA_XP bool "Marvell Armada XP boards" depends on ARCH_MULTI_V7 + select ARMADA_370_XP_IRQ select ARMADA_XP_CLK select CPU_PJ4B select MACH_MVEBU_V7 diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 55348ee5a352..7e989d61159c 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -107,7 +107,7 @@ static struct notifier_block mvebu_hwcc_nb = { .notifier_call = mvebu_hwcc_notifier, }; -static struct notifier_block mvebu_hwcc_pci_nb = { +static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = { .notifier_call = mvebu_hwcc_notifier, }; diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index f9597b701028..46c742d3bd41 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -140,6 +140,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) panic("Cannot find 'marvell,bootrom' compatible node"); err = of_address_to_resource(node, 0, &res); + of_node_put(node); if (err < 0) panic("Cannot get 'bootrom' node address"); diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig index 3d90ef19be2b..2da8e5dfcf24 100644 --- a/arch/arm/mach-netx/Kconfig +++ b/arch/arm/mach-netx/Kconfig @@ -3,20 +3,17 @@ menu "NetX Implementations" config MACH_NXDKN bool "Enable Hilscher nxdkn Eval Board support" - depends on ARCH_NETX help Board support for the Hilscher NetX Eval Board config MACH_NXDB500 bool "Enable Hilscher nxdb500 Eval Board support" - depends on ARCH_NETX select ARM_AMBA help Board support for the Hilscher nxdb500 Eval Board config MACH_NXEB500HMI bool "Enable Hilscher nxeb500hmi Eval Board support" - depends on ARCH_NETX select ARM_AMBA help Board support for the Hilscher nxeb500hmi Eval Board diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index d122ee6ab991..8814ee5e98fd 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -42,8 +42,8 @@ int netx_clcd_setup(struct clcd_fb *fb) fb->panel = netx_panel; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, 1024*1024, - &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; @@ -57,16 +57,14 @@ int netx_clcd_setup(struct clcd_fb *fb) int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } void netx_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h index 5cb1051b5831..033875dbc32b 100644 --- a/arch/arm/mach-netx/include/mach/uncompress.h +++ b/arch/arm/mach-netx/include/mach/uncompress.h @@ -40,7 +40,7 @@ #define FR_BUSY (1<<3) #define FR_TXFF (1<<5) -static void putc(char c) +static inline void putc(char c) { unsigned long base; diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-nspire/Makefile.boot +++ /dev/null diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c index abea12617b17..ea0e5b2ca1cd 100644 --- a/arch/arm/mach-nspire/clcd.c +++ b/arch/arm/mach-nspire/clcd.c @@ -90,8 +90,8 @@ int nspire_clcd_setup(struct clcd_fb *fb) panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8; panel_size = ALIGN(panel_size, PAGE_SIZE); - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, - panel_size, &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, panel_size, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { pr_err("CLCD: unable to map framebuffer\n"); @@ -107,13 +107,12 @@ int nspire_clcd_setup(struct clcd_fb *fb) int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } void nspire_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 7b02ed218a42..f6ba589cd312 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,6 +25,7 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/omap-dma.h> #include <mach/tc.h> @@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = { .num_res = 1, }; +/* OMAP730, OMAP850 */ +static const struct dma_slave_map omap7xx_sdma_map[] = { + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) }, + { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) }, + { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) }, + { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) }, + { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) }, + { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) }, + { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) }, + { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) }, + { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) }, +}; + +/* OMAP1510, OMAP1610*/ +static const struct dma_slave_map omap1xxx_sdma_map[] = { + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) }, + { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) }, + { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) }, + { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) }, + { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) }, + { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) }, + { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) }, + { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) }, + { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) }, + { "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) }, + { "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) }, +}; + static struct omap_system_dma_plat_info dma_plat_info __initdata = { .reg_map = reg_map, .channel_stride = 0x40, @@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void) p.dma_attr = d; p.errata = configure_dma_errata(); + if (cpu_is_omap7xx()) { + p.slave_map = omap7xx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map); + } else { + p.slave_map = omap1xxx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map); + } + ret = platform_device_add_data(pdev, &p, sizeof(p)); if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index 4869633de8cd..9cca6a56788f 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -45,7 +45,7 @@ static void set_omap_uart_info(unsigned char port) *uart_info = port; } -static void putc(int c) +static inline void putc(int c) { if (!uart_base) return; diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot deleted file mode 100644 index b03e562acc60..000000000000 --- a/arch/arm/mach-omap2/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 809827265fb3..bab814d2f37d 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -18,6 +18,7 @@ #include <asm/setup.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include "common.h" @@ -77,12 +78,31 @@ static const char *const n900_boards_compat[] __initconst = { NULL, }; +/* Set system_rev from atags */ +static void __init rx51_set_system_rev(const struct tag *tags) +{ + const struct tag *tag; + + if (tags->hdr.tag != ATAG_CORE) + return; + + for_each_tag(tag, tags) { + if (tag->hdr.tag == ATAG_REVISION) { + system_rev = tag->u.revision.rev; + break; + } + } +} + /* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags, * save them while the data is still not overwritten */ static void __init rx51_reserve(void) { - save_atags((const struct tag *)(PAGE_OFFSET + 0x100)); + const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100); + + save_atags(tags); + rx51_set_system_rev(tags); omap_reserve(); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9cda974a3009..d7f1d69daf6d 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -66,32 +65,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) -static inline void __init omap_init_mbox(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - struct omap_mbox_pdata *pdata; - - oh = omap_hwmod_lookup("mailbox"); - if (!oh) { - pr_err("%s: unable to find hwmod\n", __func__); - return; - } - if (!oh->dev_attr) { - pr_err("%s: hwmod doesn't have valid attrs\n", __func__); - return; - } - - pdata = (struct omap_mbox_pdata *)oh->dev_attr; - pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); - WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", - __func__, PTR_ERR(pdev)); -} -#else -static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP2PLUS_MBOX */ - static inline void omap_init_sti(void) {} #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) @@ -229,7 +202,6 @@ static int __init omap2_init_devices(void) * please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_mbox(); omap_init_mcspi(); omap_init_sham(); omap_init_aes(); diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 1ed4be184a29..e58c13a9bea5 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/of.h> #include <linux/omap-dma.h> @@ -203,6 +204,108 @@ static unsigned configure_dma_errata(void) return errata; } +static const struct dma_slave_map omap24xx_sdma_map[] = { + { "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) }, + { "omap-aes", "tx", SDMA_FILTER_PARAM(9) }, + { "omap-aes", "rx", SDMA_FILTER_PARAM(10) }, + { "omap-sham", "rx", SDMA_FILTER_PARAM(13) }, + { "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) }, + { "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) }, + { "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) }, + { "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) }, + { "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) }, + { "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) }, + { "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) }, + { "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) }, + { "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) }, + { "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) }, + { "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) }, + { "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) }, + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) }, + { "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) }, + { "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) }, + { "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) }, + { "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) }, + { "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) }, + { "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) }, + { "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) }, + { "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) }, + { "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) }, + { "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) }, + { "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) }, + { "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) }, + { "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) }, + { "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) }, + { "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) }, + { "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) }, + { "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) }, + { "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) }, + { "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) }, + { "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) }, + { "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) }, + { "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) }, +}; + +static const struct dma_slave_map omap3xxx_sdma_map[] = { + { "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) }, + { "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) }, + { "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) }, + { "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) }, + { "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) }, + { "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) }, + { "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) }, + { "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) }, + { "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) }, + { "omap_i2c.3", "tx", SDMA_FILTER_PARAM(25) }, + { "omap_i2c.3", "rx", SDMA_FILTER_PARAM(26) }, + { "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) }, + { "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) }, + { "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) }, + { "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) }, + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) }, + { "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) }, + { "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) }, + { "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) }, + { "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) }, + { "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) }, + { "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) }, + { "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) }, + { "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) }, + { "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) }, + { "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) }, + { "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) }, + { "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) }, + { "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) }, + { "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) }, + { "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) }, + { "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) }, + { "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) }, + { "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) }, + { "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) }, + { "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) }, + { "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) }, + { "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) }, + { "omap-aes", "tx", SDMA_FILTER_PARAM(65) }, + { "omap-aes", "rx", SDMA_FILTER_PARAM(66) }, + { "omap-sham", "rx", SDMA_FILTER_PARAM(69) }, + { "omap2_mcspi.3", "tx0", SDMA_FILTER_PARAM(70) }, + { "omap2_mcspi.3", "rx0", SDMA_FILTER_PARAM(71) }, + { "omap_hsmmc.2", "tx", SDMA_FILTER_PARAM(77) }, + { "omap_hsmmc.2", "rx", SDMA_FILTER_PARAM(78) }, + { "omap_uart.3", "tx", SDMA_FILTER_PARAM(81) }, + { "omap_uart.3", "rx", SDMA_FILTER_PARAM(82) }, +}; + static struct omap_system_dma_plat_info dma_plat_info __initdata = { .reg_map = reg_map, .channel_stride = 0x60, @@ -231,6 +334,20 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr; p.errata = configure_dma_errata(); + if (!of_have_populated_dt()) { + if (soc_is_omap24xx()) { + p.slave_map = omap24xx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap24xx_sdma_map); + } else if (soc_is_omap34xx() || soc_is_omap3630()) { + p.slave_map = omap3xxx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap3xxx_sdma_map); + } else { + pr_err("%s: The legacy DMA map is not provided!\n", + __func__); + return -ENODEV; + } + } + pdev = omap_device_build(name, 0, oh, &p, sizeof(p)); if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 7b76ce01c21d..8633c703546a 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base) static void set_onenand_cfg(void __iomem *onenand_base) { - u32 reg; + u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; if (onenand_flags & ONENAND_FLAG_SYNCREAD) @@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); } @@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) } } + onenand_async.sync_write = true; omap2_onenand_calc_async_timings(&t); ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 0437537751bc..f7ff3b9dad87 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb, { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od; + int err; switch (event) { case BUS_NOTIFY_DEL_DEVICE: if (pdev->archdata.od) omap_device_delete(pdev->archdata.od); break; + case BUS_NOTIFY_UNBOUND_DRIVER: + od = to_omap_device(pdev); + if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) { + dev_info(dev, "enabled after unload, idling\n"); + err = omap_device_idle(pdev); + if (err) + dev_err(dev, "failed to idle\n"); + } + break; case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); @@ -602,8 +612,10 @@ static int _od_runtime_resume(struct device *dev) int ret; ret = omap_device_enable(pdev); - if (ret) + if (ret) { + dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n"); return ret; + } return pm_generic_runtime_resume(dev); } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e9f65fec55c0..2af6ff63e3b4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If the cached value is the same as the new value, skip the write */ - if (oh->_sysc_cache != v) - _write_sysconfig(v, oh); + _write_sysconfig(v, oh); /* * Set the autoidle bit only after setting the smartidle bit @@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - _write_sysconfig(v, oh); + /* If the cached value is the same as the new value, skip the write */ + if (oh->_sysc_cache != v) + _write_sysconfig(v, oh); } /** @@ -2200,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh) */ static int _idle(struct omap_hwmod *oh) { + if (oh->flags & HWMOD_NO_IDLE) { + oh->_int_flags |= _HWMOD_SKIP_ENABLE; + return 0; + } + pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -2504,6 +2509,8 @@ static int __init _init(struct omap_hwmod *oh, void *data) oh->flags |= HWMOD_INIT_NO_RESET; if (of_find_property(np, "ti,no-idle-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_IDLE; + if (of_find_property(np, "ti,no-idle", NULL)) + oh->flags |= HWMOD_NO_IDLE; } oh->_state = _HWMOD_STATE_INITIALIZED; @@ -2630,7 +2637,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh) * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data - * it should be set by the core code as a runtime flag during startup */ - if ((oh->flags & HWMOD_INIT_NO_IDLE) && + if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) && (postsetup_state == _HWMOD_STATE_IDLE)) { oh->_int_flags |= _HWMOD_SKIP_ENABLE; postsetup_state = _HWMOD_STATE_ENABLED; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 76bce11c85a4..7c7a31169475 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -525,6 +525,8 @@ struct omap_hwmod_omap4_prcm { * or idled. * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to * operate and they need to be handled at the same time as the main_clk. + * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain + * IPs like CPSW on DRA7, where clocks to this module cannot be disabled. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -541,6 +543,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) #define HWMOD_RECONFIG_IO_CHAIN (1 << 13) #define HWMOD_OPT_CLKS_NEEDED (1 << 14) +#define HWMOD_NO_IDLE (1 << 15) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index e97a894b5f88..97fd399202dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -1020,9 +1020,21 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *am43xx_rtc_hwmod_ocp_ifs[] __initdata = { + &am33xx_l4_wkup__rtc, + NULL, +}; + int __init am43xx_hwmod_init(void) { + int ret; + omap_hwmod_am43xx_reg(); omap_hwmod_init(); - return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs); + ret = omap_hwmod_register_links(am43xx_hwmod_ocp_ifs); + + if (!ret && of_machine_is_compatible("ti,am4372")) + ret = omap_hwmod_register_links(am43xx_rtc_hwmod_ocp_ifs); + + return ret; } diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index b61355e2a771..9442d89bd229 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -430,6 +430,67 @@ static struct omap_hwmod dra7xx_dma_system_hwmod = { }; /* + * 'tpcc' class + * + */ +static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = { + .name = "tpcc", +}; + +static struct omap_hwmod dra7xx_tpcc_hwmod = { + .name = "tpcc", + .class = &dra7xx_tpcc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET, + }, + }, +}; + +/* + * 'tptc' class + * + */ +static struct omap_hwmod_class dra7xx_tptc_hwmod_class = { + .name = "tptc", +}; + +/* tptc0 */ +static struct omap_hwmod dra7xx_tptc0_hwmod = { + .name = "tptc0", + .class = &dra7xx_tptc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* tptc1 */ +static struct omap_hwmod dra7xx_tptc1_hwmod = { + .name = "tptc1", + .class = &dra7xx_tptc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* * 'dss' class * */ @@ -1526,8 +1587,31 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * */ +/* + * As noted in documentation for _reset() in omap_hwmod.c, the stock reset + * functionality of OMAP HWMOD layer does not deassert the hardreset lines + * associated with an IP automatically leaving the driver to handle that + * by itself. This does not work for PCIeSS which needs the reset lines + * deasserted for the driver to start accessing registers. + * + * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset + * lines after asserting them. + */ +static int dra7xx_pciess_reset(struct omap_hwmod *oh) +{ + int i; + + for (i = 0; i < oh->rst_lines_cnt; i++) { + omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name); + omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name); + } + + return 0; +} + static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { .name = "pcie", + .reset = dra7xx_pciess_reset, }; /* pcie1 */ @@ -2563,6 +2647,30 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l3_main_1 -> tpcc */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tpcc_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l3_main_1 -> tptc0 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tptc0_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l3_main_1 -> tptc1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tptc1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = { { .name = "family", @@ -3380,6 +3488,9 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__mcasp3, &dra7xx_gmac__mdio, &dra7xx_l4_cfg__dma_system, + &dra7xx_l3_main_1__tpcc, + &dra7xx_l3_main_1__tptc0, + &dra7xx_l3_main_1__tptc1, &dra7xx_l3_main_1__dss, &dra7xx_l3_main_1__dispc, &dra7xx_l3_main_1__hdmi, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 743a2a2183a0..df8327713d06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -228,6 +228,42 @@ static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = { .user = OCP_USER_MPU, }; +/* RTC */ +static struct omap_hwmod_class_sysconfig ti81xx_rtc_sysc = { + .rev_offs = 0x74, + .sysc_offs = 0x78, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | + SIDLE_SMART | SIDLE_SMART_WKUP, + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class ti81xx_rtc_hwmod_class = { + .name = "rtc", + .sysc = &ti81xx_rtc_sysc, +}; + +struct omap_hwmod ti81xx_rtc_hwmod = { + .name = "rtc", + .class = &ti81xx_rtc_hwmod_class, + .clkdm_name = "alwon_l3s_clkdm", + .flags = HWMOD_NO_IDLEST, + .main_clk = "sysclk18_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_RTC_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if ti81xx_l4_ls__rtc = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &ti81xx_rtc_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + /* UART common */ static struct omap_hwmod_class_sysconfig uart_sysc = { .rev_offs = 0x50, @@ -1383,6 +1419,7 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__mcspi1, &dm814x_l4_ls__mmc1, &dm814x_l4_ls__mmc2, + &ti81xx_l4_ls__rtc, &dm81xx_alwon_l3_fast__tpcc, &dm81xx_alwon_l3_fast__tptc0, &dm81xx_alwon_l3_fast__tptc1, @@ -1422,6 +1459,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__gpio1, &dm81xx_l4_ls__gpio2, &dm81xx_l4_ls__elm, + &ti81xx_l4_ls__rtc, &dm816x_l4_ls__mmc1, &dm816x_l4_ls__timer1, &dm816x_l4_ls__timer2, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index e781e4fae13a..a935d28443da 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -23,6 +23,8 @@ #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> #include <linux/platform_data/wkup_m3.h> +#include <linux/platform_data/pwm_omap_dmtimer.h> +#include <plat/dmtimer.h> #include "common.h" #include "common-board-devices.h" @@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } +/* Dual mode timer PWM callbacks platdata */ +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) +struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { + .request_by_node = omap_dm_timer_request_by_node, + .free = omap_dm_timer_free, + .enable = omap_dm_timer_enable, + .disable = omap_dm_timer_disable, + .get_fclk = omap_dm_timer_get_fclk, + .start = omap_dm_timer_start, + .stop = omap_dm_timer_stop, + .set_load = omap_dm_timer_set_load, + .set_match = omap_dm_timer_set_match, + .set_pwm = omap_dm_timer_set_pwm, + .set_prescaler = omap_dm_timer_set_prescaler, + .write_counter = omap_dm_timer_write_counter, +}; +#endif + /* * Few boards still need auxdata populated before we populate * the dev entries in of_platform_populate(). @@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", &wkup_m3_data), #endif +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) + OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata), +#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", &omap4_iommu_pdata), diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index f164c6b32ce2..8e072de89fed 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -252,7 +252,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, info = omap_serial_default_info; oh = uart->oh; - name = DRIVER_NAME; + name = OMAP_SERIAL_DRIVER_NAME; omap_up.dma_enabled = info->dma_enabled; omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index eafd120b53f1..1b9f0520dea9 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 - adrl r2, l2dis_3630 @ may be too distant for plain adr - str r1, [r2] + adrl r3, l2dis_3630_offset @ may be too distant for plain adr + ldr r2, [r3] @ value for offset + str r1, [r2, r3] @ write to l2dis_3630 ldmfd sp!, {pc} @ restore regs and return ENDPROC(enable_omap3630_toggle_l2_on_restore) - .text -/* Function to call rom code to save secure ram context */ +/* + * Function to call rom code to save secure ram context. This gets + * relocated to SRAM, so it can be all in .data section. Otherwise + * we need to initialize api_params separately. + */ + .data .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack @@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context) ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context + .text + /* * ====================== * == Idle entry point == @@ -289,12 +296,6 @@ wait_sdrc_ready: bic r5, r5, #0x40 str r5, [r4] -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - is_dll_in_lock_mode: /* Is dll in lock mode? */ ldr r4, sdrc_dlla_ctrl @@ -302,11 +303,7 @@ is_dll_in_lock_mode: tst r5, #0x4 bne exit_nonoff_modes @ Return if locked /* wait till dll locks */ - adr r7, kick_counter wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] ldr r4, sdrc_dlla_status /* Wait 20uS for lock */ mov r6, #8 @@ -330,9 +327,6 @@ kick_dll: orr r6, r6, #(1<<3) @ enable dll str r6, [r4] dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter b wait_dll_lock_timed exit_nonoff_modes: @@ -360,15 +354,6 @@ sdrc_dlla_status: .word SDRC_DLLA_STATUS_V sdrc_dlla_ctrl: .word SDRC_DLLA_CTRL_V - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 - ENTRY(omap3_do_wfi_sz) .word . - omap3_do_wfi @@ -437,7 +422,9 @@ ENTRY(omap3_restore) cmp r2, #0x0 @ Check if target power state was OFF or RET bne logic_l1_restore - ldr r0, l2dis_3630 + adr r1, l2dis_3630_offset @ address for offset + ldr r0, [r1] @ value for offset + ldr r0, [r1, r0] @ value at l2dis_3630 cmp r0, #0x1 @ should we disable L2 on 3630? bne skipl2dis mrc p15, 0, r0, c1, c0, 1 @@ -449,12 +436,14 @@ skipl2dis: and r1, #0x700 cmp r1, #0x300 beq l2_inv_gp + adr r0, l2_inv_api_params_offset + ldr r3, [r0] + add r3, r3, r0 @ r3 points to dummy parameters mov r0, #40 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff - adr r3, l2_inv_api_params @ r3 points to dummy parameters dsb @ data write barrier dmb @ data memory barrier smc #1 @ call SMI monitor (smi #1) @@ -488,8 +477,8 @@ skipl2dis: b logic_l1_restore .align -l2_inv_api_params: - .word 0x1, 0x00 +l2_inv_api_params_offset: + .long l2_inv_api_params - . l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalidate L2 @@ -506,7 +495,9 @@ l2_inv_gp: mov r12, #0x2 smc #0 @ Call SMI monitor (smieq) logic_l1_restore: - ldr r1, l2dis_3630 + adr r0, l2dis_3630_offset @ adress for offset + ldr r1, [r0] @ value for offset + ldr r1, [r0, r1] @ value at l2dis_3630 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 bne skipl2reen mrc p15, 0, r1, c1, c0, 1 @@ -535,9 +526,17 @@ control_stat: .word CONTROL_STAT control_mem_rta: .word CONTROL_MEM_RTA_CTRL +l2dis_3630_offset: + .long l2dis_3630 - . + + .data l2dis_3630: .word 0 + .data +l2_inv_api_params: + .word 0x1, 0x00 + /* * Internal functions */ diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9b09d85d811a..c7a3b4aab4b5 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -29,12 +29,6 @@ dsb .endm -ppa_zero_params: - .word 0x0 - -ppa_por_params: - .word 1, 0 - #ifdef CONFIG_ARCH_OMAP4 /* @@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume) beq skip_ns_smp_enable ppa_actrl_retry: mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX - adr r3, ppa_zero_params @ Pointer to parameters + adr r1, ppa_zero_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_zero_params mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag mov r6, #0xff @@ -303,7 +299,9 @@ skip_ns_smp_enable: ldr r0, =OMAP4_PPA_L2_POR_INDEX ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] - adr r3, ppa_por_params + adr r1, ppa_por_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_por_params str r4, [r3, #0x04] mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag @@ -328,6 +326,8 @@ skip_l2en: #endif b cpu_resume @ Jump to generic resume +ppa_por_params_offset: + .long ppa_por_params - . ENDPROC(omap4_cpu_resume) #endif /* CONFIG_ARCH_OMAP4 */ @@ -380,4 +380,13 @@ ENTRY(omap_do_wfi) nop ldmfd sp!, {pc} +ppa_zero_params_offset: + .long ppa_zero_params - . ENDPROC(omap_do_wfi) + + .data +ppa_zero_params: + .word 0 + +ppa_por_params: + .word 1, 0 diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 79ca3c3eb2af..70df8f6cddcc 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -181,6 +181,14 @@ static inline int is_ti ##class (void) \ return (GET_TI_CLASS == (id)) ? 1 : 0; \ } +#define GET_DRA_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_DRA_CLASS(class, id) \ +static inline int is_dra ##class (void) \ +{ \ + return (GET_DRA_CLASS == (id)) ? 1 : 0; \ +} + #define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) #define IS_OMAP_SUBCLASS(subclass, id) \ @@ -201,6 +209,12 @@ static inline int is_am ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } +#define IS_DRA_SUBCLASS(subclass, id) \ +static inline int is_dra ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_CLASS(44xx, 0x44) @@ -210,6 +224,7 @@ IS_AM_CLASS(33xx, 0x33) IS_AM_CLASS(43xx, 0x43) IS_TI_CLASS(81xx, 0x81) +IS_DRA_CLASS(7xx, 0x7) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) @@ -224,6 +239,8 @@ IS_TI_SUBCLASS(816x, 0x816) IS_TI_SUBCLASS(814x, 0x814) IS_AM_SUBCLASS(335x, 0x335) IS_AM_SUBCLASS(437x, 0x437) +IS_DRA_SUBCLASS(75x, 0x75) +IS_DRA_SUBCLASS(72x, 0x72) #define soc_is_omap24xx() 0 #define soc_is_omap242x() 0 @@ -397,9 +414,9 @@ IS_OMAP_TYPE(3430, 0x3430) #undef soc_is_dra7xx #undef soc_is_dra74x #undef soc_is_dra72x -#define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7")) -#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74")) -#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72")) +#define soc_is_dra7xx() is_dra7xx() +#define soc_is_dra74x() is_dra75x() +#define soc_is_dra72x() is_dra72x() #endif /* Various silicon revisions for omap2 */ diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a9ad95f000a1..a2af15822fcb 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -28,14 +28,14 @@ config ARCH_ORION5X_DT config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-2 (88F5281) Development Board config MACH_RD88F5182 bool "Marvell Orion-NAS Reference Design" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2 @@ -43,14 +43,14 @@ config MACH_RD88F5182 config MACH_RD88F5182_DT bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)" select ARCH_ORION5X_DT - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2, Flattened Device Tree. config MACH_KUROBOX_PRO bool "KuroBox Pro" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the KuroBox Pro platform. @@ -58,7 +58,7 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" select GENERIC_NET_UTILS - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the D-Link DNS-323 platform. @@ -78,7 +78,7 @@ config MACH_TERASTATION_PRO2 config MACH_LINKSTATION_PRO bool "Buffalo Linkstation Pro/Live" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation Pro/Live platform. Both v1 and @@ -86,7 +86,7 @@ config MACH_LINKSTATION_PRO config MACH_LINKSTATION_LSCHL bool "Buffalo Linkstation Live v3 (LS-CHL)" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation Live v3 (LS-CHL) platform. @@ -100,7 +100,7 @@ config MACH_LINKSTATION_MINI config MACH_LINKSTATION_LS_HGL bool "Buffalo Linkstation LS-HGL" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation LS-HGL platform. @@ -139,7 +139,7 @@ config MACH_D2NET_DT config MACH_NET2BIG bool "LaCie 2Big Network" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the LaCie 2Big Network NAS. diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-orion5x/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index f998eb1c698e..0cf4426183cf 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_SIRF bool "CSR SiRF" depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP select NO_IOPORT_MAP diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot deleted file mode 100644 index c77a4883a4ee..000000000000 --- a/arch/arm/mach-prima2/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f09683687963..7ee4652b4c61 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -297,7 +297,6 @@ config MACH_MAGICIAN config MACH_MIOA701 bool "Mitac Mio A701 Support" - select GPIO_SYSFS select IWMMXT select PXA27x help @@ -529,7 +528,7 @@ config MACH_TOSA config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" - depends on MACH_TOSA + depends on MACH_TOSA && NET select RFKILL help This is a simple driver that is able to control diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 37d8d85662f0..913a319c7b00 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -1203,6 +1203,7 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) static struct mmp_dma_platdata pxa_dma_pdata = { .dma_channels = 0, + .nb_requestors = 0, }; static struct resource pxa_dma_resource[] = { @@ -1231,7 +1232,7 @@ static struct platform_device pxa2xx_pxa_dma = { .resource = pxa_dma_resource, }; -void __init pxa2xx_set_dmac_info(int nb_channels) +void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors) { pxa_dma_pdata.dma_channels = nb_channels; pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata); diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 0b00b226f54b..e838b11fb8c7 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -57,7 +57,7 @@ struct gpio_vbus_mach_info e7xx_udc_info = { .gpio_pullup_inverted = 1 }; -static struct platform_device e7xx_gpio_vbus = { +static struct platform_device e7xx_gpio_vbus __maybe_unused = { .name = "gpio-vbus", .id = -1, .dev = { @@ -126,7 +126,7 @@ struct resource eseries_tmio_resources[] = { }; /* Some e-series hardware cannot control the 32K clock */ -static void __init eseries_register_clks(void) +static void __init __maybe_unused eseries_register_clks(void) { clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768); } diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 6815a9357774..9c5b2fb054f9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void) { int timeout = 500; - if (!(OSCC & OSCC_OOK)) + if (!(readl(OSCC) & OSCC_OOK)) pr_warn("32kHz clock was not on. Bootloader may need to be updated\n"); else return; - OSCC |= OSCC_OON; + writel(readl(OSCC) | OSCC_OON, OSCC); do { - if (OSCC & OSCC_OOK) + if (readl(OSCC) & OSCC_OOK) break; udelay(1); } while (--timeout); diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h index 1b80a4805a60..e69de29bb2d1 100644 --- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h +++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h @@ -1,163 +0,0 @@ -#ifndef _ASM_ARCH_PXA25X_UDC_H -#define _ASM_ARCH_PXA25X_UDC_H - -#ifdef _ASM_ARCH_PXA27X_UDC_H -#error "You can't include both PXA25x and PXA27x UDC support" -#endif - -#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ -#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ -#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -/* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -/* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -/* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -/* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -/* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ -#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ -#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ -#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ -#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ -#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ -#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ -#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ -#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ -#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ -#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ -#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ -#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ -#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ -#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ -#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ -#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ -#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ -#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ -#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ -#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ -#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ -#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ -#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ - -#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index f1dd62946b36..5537d5601d70 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -134,10 +134,10 @@ /* * PXA2xx specific Core clock definitions */ -#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ -#define CKEN __REG(0x41300004) /* Clock Enable Register */ -#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ +#define CCCR io_p2v(0x41300000) /* Core Clock Configuration Register */ +#define CCSR io_p2v(0x4130000C) /* Core Clock Status Register */ +#define CKEN io_p2v(0x41300004) /* Clock Enable Register */ +#define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index f4d48d20754e..888bf7ade15a 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -18,7 +18,7 @@ /* * Oscillator Configuration Register (OSCC) */ -#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ +#define OSCC io_p2v(0x41350000) /* Oscillator Configuration Register */ #define OSCC_PEN (1 << 11) /* 13MHz POUT */ diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h index 51558bcee999..3aab90d8d2b7 100644 --- a/arch/arm/mach-pxa/pm.h +++ b/arch/arm/mach-pxa/pm.h @@ -29,6 +29,9 @@ extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); extern void pxa_pm_finish(void); +extern const char pm_enter_standby_start[], pm_enter_standby_end[]; +extern int pxa3xx_finish_suspend(unsigned long); + /* NOTE: this is for PM debugging on Lubbock, it's really a big * ugly, but let's keep the crap minimum here, instead of direct * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index 8e0e62ccdced..f128133a8f30 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -19,42 +19,18 @@ #include "generic.h" #ifdef CONFIG_PXA3xx -static const struct of_dev_auxdata const pxa3xx_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, "pxa2xx-uart.0", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, "pxa2xx-uart.1", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL), - OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL), - OF_DEV_AUXDATA("intel,pxa3xx-gpio", 0x40e00000, "pxa3xx-gpio", NULL), - OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL), - OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL), - OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL), - OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand", NULL), - {} -}; - -static void __init pxa3xx_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - pxa3xx_auxdata_lookup, NULL); -} - static const char *const pxa3xx_dt_board_compat[] __initconst = { "marvell,pxa300", "marvell,pxa310", "marvell,pxa320", NULL, }; -#endif -#ifdef CONFIG_PXA3xx DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)") .map_io = pxa3xx_map_io, .init_irq = pxa3xx_dt_init_irq, .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, .restart = pxa_restart, - .init_machine = pxa3xx_dt_init, .dt_compat = pxa3xx_dt_board_compat, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index a177bf45feef..823504f48f80 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -206,7 +206,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - pxa2xx_set_dmac_info(16); + pxa2xx_set_dmac_info(16, 40); pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 8dfd1755c659..2eaa341dd3f8 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -132,7 +132,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) #ifndef CONFIG_IWMMXT u64 acc0; - asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mra %Q0, %R0, acc0" : "=r" (acc0)); #endif /* ensure voltage-change sequencer not initiated, which hangs */ @@ -151,7 +152,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: cpu_suspend(pwrmode, pxa27x_finish_suspend); #ifndef CONFIG_IWMMXT - asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mar acc0, %Q0, %R0" : "=r" (acc0)); #endif break; } @@ -309,7 +311,7 @@ static int __init pxa27x_init(void) if (!of_have_populated_dt()) { pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info); - pxa2xx_set_dmac_info(32); + pxa2xx_set_dmac_info(32, 75); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index a1c4c888f246..3c9184d1d6b9 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -68,7 +68,6 @@ static unsigned long wakeup_src; */ static void pxa3xx_cpu_standby(unsigned int pwrmode) { - extern const char pm_enter_standby_start[], pm_enter_standby_end[]; void (*fn)(unsigned int) = (void __force *)(sram + 0x8000); memcpy_toio(sram + 0x8000, pm_enter_standby_start, @@ -103,11 +102,10 @@ static void pxa3xx_cpu_pm_suspend(void) #ifndef CONFIG_IWMMXT u64 acc0; - asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mra %Q0, %R0, acc0" : "=r" (acc0)); #endif - extern int pxa3xx_finish_suspend(unsigned long); - /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); CKENB |= 1 << (CKEN_HSIO2 & 0x1f); @@ -133,7 +131,8 @@ static void pxa3xx_cpu_pm_suspend(void) AD3ER = 0; #ifndef CONFIG_IWMMXT - asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mar acc0, %Q0, %R0" : "=r" (acc0)); #endif } @@ -450,7 +449,7 @@ static int __init pxa3xx_init(void) if (of_have_populated_dt()) return 0; - pxa2xx_set_dmac_info(32); + pxa2xx_set_dmac_info(32, 100); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) return ret; diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8347d87a713d..5a941bd3dbed 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -18,12 +18,13 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/property.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/smsc911x.h> #include <linux/input.h> -#include <linux/rotary_encoder.h> #include <linux/gpio_keys.h> #include <linux/input/eeti_ts.h> #include <linux/leds.h> @@ -366,22 +367,31 @@ static struct pxaohci_platform_data raumfeld_ohci_info = { * Rotary encoder input device */ -static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = { - .steps = 24, - .axis = REL_X, - .relative_axis = 1, - .gpio_a = GPIO_VOLENC_A, - .gpio_b = GPIO_VOLENC_B, - .inverted_a = 1, - .inverted_b = 0, +static struct gpiod_lookup_table raumfeld_rotary_gpios_table = { + .dev_id = "rotary-encoder.0", + .table = { + GPIO_LOOKUP_IDX("gpio-0", + GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-0", + GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct property_entry raumfeld_rotary_properties[] = { + PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24), + PROPERTY_ENTRY_INTEGER("linux,axis", u32, REL_X), + PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis", u32, 1), + { }, +}; + +static struct property_set raumfeld_rotary_property_set = { + .properties = raumfeld_rotary_properties, }; static struct platform_device rotary_encoder_device = { .name = "rotary-encoder", .id = 0, - .dev = { - .platform_data = &raumfeld_rotary_encoder_info, - } }; /** @@ -1051,7 +1061,12 @@ static void __init __maybe_unused raumfeld_controller_init(void) int ret; pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); + + gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); + device_add_property_set(&rotary_encoder_device.dev, + &raumfeld_rotary_property_set); platform_device_register(&rotary_encoder_device); + spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); @@ -1086,6 +1101,10 @@ static void __init __maybe_unused raumfeld_speaker_init(void) i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); platform_device_register(&smc91x_device); + + gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); + device_add_property_set(&rotary_encoder_device.dev, + &raumfeld_rotary_property_set); platform_device_register(&rotary_encoder_device); raumfeld_audio_init(); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 825f903ab77e..d9578bc49fdc 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -201,7 +201,7 @@ static void __init spitz_scoop_init(void) } /* Power control is shared with between one of the CF slots and SD */ -static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) +static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) { unsigned short cpr; unsigned long flags; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 515b7ddda8aa..3b94ecfb9426 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -910,7 +910,7 @@ static void __init zeus_map_io(void) PMCR = PSPR = 0; /* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */ - OSCC |= OSCC_OON; + writel(readl(OSCC) | OSCC_OON, OSCC); /* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...). * float chip selects and PCMCIA */ diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index def40a0dd60c..70ab4a25a5f8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_REALVIEW - bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 + bool "ARM Ltd. RealView family" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 select ARM_AMBA select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot deleted file mode 100644 index d2c3d788f688..000000000000 --- a/arch/arm/mach-realview/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ -ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70800000 -else - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 -endif diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c index 65585392655b..6964e8876061 100644 --- a/arch/arm/mach-realview/platsmp-dt.c +++ b/arch/arm/mach-realview/platsmp-dt.c @@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus) virt_to_phys(versatile_secondary_startup)); } -struct smp_operations realview_dt_smp_ops __initdata = { +static const struct smp_operations realview_dt_smp_ops __initconst = { .smp_prepare_cpus = realview_smp_prepare_cpus, .smp_secondary_init = versatile_secondary_init, .smp_boot_secondary = versatile_boot_secondary, diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index 0fd4b0b8ef22..654a6f3f2547 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -76,7 +76,7 @@ int white; /* * This does not append a newline */ -static void putc(int c) +static inline void putc(int c) { extern void ll_write_char(char *, char c, char white); int x,y; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index ef68ecb27396..b91aee406c74 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -15,6 +15,7 @@ config PLAT_S3C24XX select NO_IOPORT_MAP select S3C_DEV_NAND select IRQ_DOMAIN + select COMMON_CLK help Base platform code for any Samsung S3C24XX device @@ -405,7 +406,7 @@ config MACH_S3C2416_DT endif # CPU_S3C2416 -if CPU_S3C2440 +if CPU_S3C2440 || CPU_S3C2442 config S3C2440_XTAL_12000000 bool @@ -432,6 +433,9 @@ config S3C2440_PLL_16934400 default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. +endif + +if CPU_S3C2440 comment "S3C2440 Boards" @@ -460,7 +464,6 @@ config MACH_AT2440EVB config MACH_MINI2440 bool "MINI2440 development board" - select EEPROM_AT24 if I2C select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h index 5dd1db4e2677..235c53647aa4 100644 --- a/arch/arm/mach-s3c24xx/include/mach/io.h +++ b/arch/arm/mach-s3c24xx/include/mach/io.h @@ -190,7 +190,7 @@ DECLARE_IO(int,l,"") result; \ }) -#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port))) +#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port))) #define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) #define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h index 444793f0f5f1..adc39043aa21 100644 --- a/arch/arm/mach-s3c24xx/include/mach/map.h +++ b/arch/arm/mach-s3c24xx/include/mach/map.h @@ -14,13 +14,6 @@ #define __ASM_ARCH_MAP_H #include <plat/map-base.h> - -/* - * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x4000) - #include <plat/map-s3c.h> /* @@ -34,9 +27,6 @@ #define S3C2410_PA_MEMCTRL (0x48000000) #define S3C24XX_SZ_MEMCTRL SZ_1M -/* UARTs */ -#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) - /* Timers */ #define S3C2410_PA_TIMER (0x51000000) #define S3C24XX_SZ_TIMER SZ_1M @@ -157,7 +147,6 @@ #define S3C_PA_FB S3C2443_PA_FB #define S3C_PA_IIC S3C2410_PA_IIC -#define S3C_PA_UART S3C24XX_PA_UART #define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0 #define S3C_PA_HSMMC1 S3C2443_PA_HSMMC diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 6d1e0b9c5b27..27ae6877550f 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -154,6 +154,7 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = { #define ADC_NOM_CHG_DETECT_1A 6 #define ADC_NOM_CHG_DETECT_USB 43 +#ifdef CONFIG_PCF50633_ADC static void gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) { @@ -174,6 +175,7 @@ gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) pcf50633_mbc_usb_curlim_set(pcf, ma); } +#endif static struct delayed_work gta02_charger_work; static int gta02_usb_vbus_draw; diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 9f54300df4b3..7ed78619217c 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -664,7 +664,7 @@ static void __init h1940_map_io(void) /* Add latch gpio chip, set latch initial value */ h1940_latch_control(0, 0); - WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); + WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL)); } static void __init h1940_init_time(void) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 7c0c420c3016..e5c1888fc67b 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -3,7 +3,8 @@ # # Licensed under GPLv2 menuconfig ARCH_S3C64XX - bool "Samsung S3C64XX" if ARCH_MULTI_V6 + bool "Samsung S3C64XX" + depends on ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot deleted file mode 100644 index c642333af3ed..000000000000 --- a/arch/arm/mach-s3c64xx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x50008000 -params_phys-y := 0x50000100 diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 8a894ee3ee76..92ec8c3b42b9 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -216,7 +216,7 @@ static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = { REGULATOR_SUPPLY("AVDD", "0-001b"), }; -static struct regulator_init_data smdk6410_b_pwr_5v_data = { +static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = { .constraints = { .always_on = 1, }, @@ -300,7 +300,7 @@ static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = { }; /* VDDARM, BUCK1 on J5 */ -static struct regulator_init_data smdk6410_vddarm = { +static struct regulator_init_data __maybe_unused smdk6410_vddarm = { .constraints = { .name = "PVDD_ARM", .min_uV = 1000000, @@ -313,7 +313,7 @@ static struct regulator_init_data smdk6410_vddarm = { }; /* VDD_INT, BUCK2 on J5 */ -static struct regulator_init_data smdk6410_vddint = { +static struct regulator_init_data __maybe_unused smdk6410_vddint = { .constraints = { .name = "PVDD_INT", .min_uV = 1000000, @@ -324,7 +324,7 @@ static struct regulator_init_data smdk6410_vddint = { }; /* VDD_HI, LDO3 on J5 */ -static struct regulator_init_data smdk6410_vddhi = { +static struct regulator_init_data __maybe_unused smdk6410_vddhi = { .constraints = { .name = "PVDD_HI", .always_on = 1, @@ -332,7 +332,7 @@ static struct regulator_init_data smdk6410_vddhi = { }; /* VDD_PLL, LDO2 on J5 */ -static struct regulator_init_data smdk6410_vddpll = { +static struct regulator_init_data __maybe_unused smdk6410_vddpll = { .constraints = { .name = "PVDD_PLL", .always_on = 1, @@ -340,7 +340,7 @@ static struct regulator_init_data smdk6410_vddpll = { }; /* VDD_UH_MMC, LDO5 on J5 */ -static struct regulator_init_data smdk6410_vdduh_mmc = { +static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = { .constraints = { .name = "PVDD_UH+PVDD_MMC", .always_on = 1, @@ -348,7 +348,7 @@ static struct regulator_init_data smdk6410_vdduh_mmc = { }; /* VCCM3BT, LDO8 on J5 */ -static struct regulator_init_data smdk6410_vccmc3bt = { +static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = { .constraints = { .name = "PVCCM3BT", .always_on = 1, @@ -356,7 +356,7 @@ static struct regulator_init_data smdk6410_vccmc3bt = { }; /* VCCM2MTV, LDO11 on J5 */ -static struct regulator_init_data smdk6410_vccm2mtv = { +static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = { .constraints = { .name = "PVCCM2MTV", .always_on = 1, @@ -364,7 +364,7 @@ static struct regulator_init_data smdk6410_vccm2mtv = { }; /* VDD_LCD, LDO12 on J5 */ -static struct regulator_init_data smdk6410_vddlcd = { +static struct regulator_init_data __maybe_unused smdk6410_vddlcd = { .constraints = { .name = "PVDD_LCD", .always_on = 1, @@ -372,7 +372,7 @@ static struct regulator_init_data smdk6410_vddlcd = { }; /* VDD_OTGI, LDO9 on J5 */ -static struct regulator_init_data smdk6410_vddotgi = { +static struct regulator_init_data __maybe_unused smdk6410_vddotgi = { .constraints = { .name = "PVDD_OTGI", .always_on = 1, @@ -380,7 +380,7 @@ static struct regulator_init_data smdk6410_vddotgi = { }; /* VDD_OTG, LDO14 on J5 */ -static struct regulator_init_data smdk6410_vddotg = { +static struct regulator_init_data __maybe_unused smdk6410_vddotg = { .constraints = { .name = "PVDD_OTG", .always_on = 1, @@ -388,7 +388,7 @@ static struct regulator_init_data smdk6410_vddotg = { }; /* VDD_ALIVE, LDO15 on J5 */ -static struct regulator_init_data smdk6410_vddalive = { +static struct regulator_init_data __maybe_unused smdk6410_vddalive = { .constraints = { .name = "PVDD_ALIVE", .always_on = 1, @@ -396,7 +396,7 @@ static struct regulator_init_data smdk6410_vddalive = { }; /* VDD_AUDIO, VLDO_AUDIO on J5 */ -static struct regulator_init_data smdk6410_vddaudio = { +static struct regulator_init_data __maybe_unused smdk6410_vddaudio = { .constraints = { .name = "PVDD_AUDIO", .always_on = 1, @@ -406,7 +406,7 @@ static struct regulator_init_data smdk6410_vddaudio = { #ifdef CONFIG_SMDK6410_WM1190_EV1 /* S3C64xx internal logic & PLL */ -static struct regulator_init_data wm8350_dcdc1_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = { .constraints = { .name = "PVDD_INT+PVDD_PLL", .min_uV = 1200000, @@ -417,7 +417,7 @@ static struct regulator_init_data wm8350_dcdc1_data = { }; /* Memory */ -static struct regulator_init_data wm8350_dcdc3_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = { .constraints = { .name = "PVDD_MEM", .min_uV = 1800000, @@ -437,7 +437,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { REGULATOR_SUPPLY("DVDD", "0-001b"), }; -static struct regulator_init_data wm8350_dcdc4_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = { .constraints = { .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV", .min_uV = 3000000, @@ -449,7 +449,7 @@ static struct regulator_init_data wm8350_dcdc4_data = { }; /* OTGi/1190-EV1 HPVDD & AVDD */ -static struct regulator_init_data wm8350_ldo4_data = { +static struct regulator_init_data __maybe_unused wm8350_ldo4_data = { .constraints = { .name = "PVDD_OTGI+HPVDD+AVDD", .min_uV = 1200000, @@ -537,7 +537,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = { .max_uA = 27554, }; -static struct regulator_init_data wm1192_dcdc3 = { +static struct regulator_init_data __maybe_unused wm1192_dcdc3 = { .constraints = { .name = "PVDD_MEM+PVDD_GPS", .always_on = 1, @@ -548,7 +548,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = { REGULATOR_SUPPLY("DVDD", "0-001b"), /* WM8580 */ }; -static struct regulator_init_data wm1192_ldo1 = { +static struct regulator_init_data __maybe_unused wm1192_ldo1 = { .constraints = { .name = "PVDD_LCD+PVDD_EXT", .always_on = 1, diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h index 73093dc89829..a1a041b9740b 100644 --- a/arch/arm/mach-sa1100/include/mach/uncompress.h +++ b/arch/arm/mach-sa1100/include/mach/uncompress.h @@ -19,7 +19,7 @@ #define UART(x) (*(volatile unsigned long *)(serial_port + (x))) -static void putc(int c) +static inline void putc(int c) { unsigned long serial_port; diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index d8965c682d2f..bb3ca9c763de 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -15,7 +15,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -369,7 +369,7 @@ static int __init simpad_init(void) cs3_gpio.get = cs3_gpio_get; cs3_gpio.direction_input = cs3_gpio_direction_input; cs3_gpio.direction_output = cs3_gpio_direction_output; - ret = gpiochip_add(&cs3_gpio); + ret = gpiochip_add_data(&cs3_gpio, NULL); if (ret) printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device"); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index cd5f171f83ce..f2bc5c353119 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -6,28 +6,30 @@ config ARCH_SHMOBILE_MULTI config PM_RCAR bool - select PM_GENERIC_DOMAINS if PM + select PM + select PM_GENERIC_DOMAINS config PM_RMOBILE bool + select PM select PM_GENERIC_DOMAINS config ARCH_RCAR_GEN1 bool - select PM_RCAR if PM || SMP + select PM_RCAR select RENESAS_INTC_IRQPIN select SYS_SUPPORTS_SH_TMU config ARCH_RCAR_GEN2 bool - select PM_RCAR if PM || SMP + select PM_RCAR select RENESAS_IRQC select SYS_SUPPORTS_SH_CMT select PCI_DOMAINS if PCI config ARCH_RMOBILE bool - select PM_RMOBILE if PM + select PM_RMOBILE select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -55,7 +57,8 @@ config ARCH_EMEV2 config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" - select PM_GENERIC_DOMAINS if PM + select PM + select PM_GENERIC_DOMAINS select SYS_SUPPORTS_SH_MTU2 config ARCH_R8A73A4 @@ -99,6 +102,4 @@ config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" select ARCH_RMOBILE select RENESAS_INTC_IRQPIN - -comment "Renesas ARM SoCs System Configuration" endif diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 9cb11215ceba..5464b7a75e30 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -4,7 +4,6 @@ extern void shmobile_init_delay(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; -extern unsigned long shmobile_boot_arg; extern unsigned long shmobile_boot_size; extern void shmobile_smp_boot(void); extern void shmobile_smp_sleep(void); @@ -12,7 +11,8 @@ extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern bool shmobile_smp_cpu_can_disable(unsigned int cpu); extern void shmobile_boot_scu(void); -extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); +extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, + unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); extern struct platform_suspend_ops shmobile_suspend_ops; @@ -31,8 +31,6 @@ int shmobile_cpufreq_init(void); static inline int shmobile_cpufreq_init(void) { return 0; } #endif -extern void __iomem *shmobile_scu_base; - static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c index 57fbff024dcd..634d701c56a7 100644 --- a/arch/arm/mach-shmobile/cpufreq.c +++ b/arch/arm/mach-shmobile/cpufreq.c @@ -10,6 +10,8 @@ #include <linux/platform_device.h> +#include "common.h" + int __init shmobile_cpufreq_init(void) { platform_device_register_simple("cpufreq-dt", -1, NULL, 0); diff --git a/arch/arm/mach-shmobile/emev2.h b/arch/arm/mach-shmobile/emev2.h new file mode 100644 index 000000000000..916d25f6780e --- /dev/null +++ b/arch/arm/mach-shmobile/emev2.h @@ -0,0 +1,6 @@ +#ifndef __ASM_EMEV2_H__ +#define __ASM_EMEV2_H__ + +extern const struct smp_operations emev2_smp_ops; + +#endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index fa5248c52399..936d7011c314 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -27,7 +27,7 @@ */ ENTRY(shmobile_boot_scu) @ r0 = SCU base address - mrc p15, 0, r1, c0, c0, 5 @ read MIPDR + mrc p15, 0, r1, c0, c0, 5 @ read MPIDR and r1, r1, #3 @ mask out cpu ID lsl r1, r1, #3 @ we will shift by cpu_id * 8 bits ldr r2, [r0, #8] @ SCU Power Status Register @@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu) b secondary_startup ENDPROC(shmobile_boot_scu) - - .text - .align 2 - .globl shmobile_scu_base -shmobile_scu_base: - .space 4 diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 330c1fc63197..32e0bf6e3ccb 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -24,7 +24,6 @@ .arm .align 12 ENTRY(shmobile_boot_vector) - ldr r0, 2f ldr r1, 1f bx r1 @@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector) .globl shmobile_boot_fn shmobile_boot_fn: 1: .space 4 - .globl shmobile_boot_arg -shmobile_boot_arg: -2: .space 4 .globl shmobile_boot_size shmobile_boot_size: .long . - shmobile_boot_vector @@ -46,13 +42,15 @@ shmobile_boot_size: */ ENTRY(shmobile_smp_boot) - @ r0 = MPIDR_HWID_BITMASK mrc p15, 0, r1, c0, c0, 5 @ r1 = MPIDR - and r0, r1, r0 @ r0 = cpu_logical_map() value + and r0, r1, #0xffffff @ MPIDR_HWID_BITMASK + @ r0 = cpu_logical_map() value mov r1, #0 @ r1 = CPU index - adr r5, 1f @ array of per-cpu mpidr values - adr r6, 2f @ array of per-cpu functions - adr r7, 3f @ array of per-cpu arguments + adr r2, 1f + ldmia r2, {r5, r6, r7} + add r5, r5, r2 @ array of per-cpu mpidr values + add r6, r6, r2 @ array of per-cpu functions + add r7, r7, r2 @ array of per-cpu arguments shmobile_smp_boot_find_mpidr: ldr r8, [r5, r1, lsl #2] @@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep) b shmobile_smp_boot ENDPROC(shmobile_smp_sleep) + .align 2 +1: .long shmobile_smp_mpidr - . + .long shmobile_smp_fn - 1b + .long shmobile_smp_arg - 1b + + .bss .globl shmobile_smp_mpidr shmobile_smp_mpidr: -1: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_fn shmobile_smp_fn: -2: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_arg shmobile_smp_arg: -3: .space NR_CPUS * 4 + .space NR_CPUS * 4 diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 911884f7e28b..aba75c89f9c1 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* perform per-cpu setup */ apmu_parse_cfg(apmu_init_cpu, apmu_config, num); diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index 64663110ab6c..8d478f1da265 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -17,6 +17,10 @@ #include <asm/smp_scu.h> #include "common.h" + +static phys_addr_t shmobile_scu_base_phys; +static void __iomem *shmobile_scu_base; + static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, unsigned long action, void *hcpu) { @@ -26,7 +30,7 @@ static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, case CPU_UP_PREPARE: /* For this particular CPU register SCU SMP boot vector */ shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu), - (unsigned long)shmobile_scu_base); + shmobile_scu_base_phys); break; }; @@ -37,13 +41,15 @@ static struct notifier_block shmobile_smp_scu_notifier = { .notifier_call = shmobile_smp_scu_notifier_call, }; -void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus) +void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, + unsigned int max_cpus) { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* enable SCU and cache coherency on booting CPU */ + shmobile_scu_base_phys = scu_base_phys; + shmobile_scu_base = ioremap(scu_base_phys, PAGE_SIZE); scu_enable(shmobile_scu_base); scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index 46d0a1ddce75..c0b05e9e6442 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -12,7 +12,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include <linux/clk/shmobile.h> +#include <linux/clk/renesas.h> #include <linux/console.h> #include <linux/delay.h> #include <linux/of.h> diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 10b7cb5dcb3a..3c99aaf65325 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -18,35 +18,17 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" - -static struct map_desc emev2_io_desc[] __initdata = { -#ifdef CONFIG_SMP - /* 2M mapping for SCU + L2 controller */ - { - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0x1e000000), - .length = SZ_2M, - .type = MT_DEVICE - }, -#endif -}; -static void __init emev2_map_io(void) -{ - iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); -} +#include "common.h" +#include "emev2.h" static const char *const emev2_boards_compat_dt[] __initconst = { "renesas,emev2", NULL, }; -extern const struct smp_operations emev2_smp_ops; - DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), - .map_io = emev2_map_io, .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .dt_compat = emev2_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 0c8f80c5b04d..db6dbfbaf9f1 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -23,41 +23,9 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/hardware/cache-l2x0.h> #include "common.h" -static struct map_desc r8a7740_io_desc[] __initdata = { - /* - * for CPGA/INTC/PFC - * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 160 << 20, - .type = MT_DEVICE_NONSHARED - }, -#ifdef CONFIG_CACHE_L2X0 - /* - * for l2x0_init() - * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000 - */ - { - .virtual = 0xf0002000, - .pfn = __phys_to_pfn(0xf0100000), - .length = PAGE_SIZE, - .type = MT_DEVICE_NONSHARED - }, -#endif -}; - -static void __init r8a7740_map_io(void) -{ - debug_ll_io_init(); - iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); -} - /* * r8a7740 chip has lasting errata on MERAM buffer. * this is work-around for it. @@ -110,10 +78,6 @@ static void __init r8a7740_generic_init(void) { r8a7740_meram_workaround(); -#ifdef CONFIG_CACHE_L2X0 - /* Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); -#endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -123,7 +87,8 @@ static const char *const r8a7740_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") - .map_io = r8a7740_map_io, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = r8a7740_generic_init, diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index fab95d1271bc..cf236db686a9 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include <linux/clk/shmobile.h> +#include <linux/clk/renesas.h> #include <linux/io.h> #include <linux/irqchip.h> diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 1e572a903f8e..0007ff51d180 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -14,7 +14,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <linux/clk/shmobile.h> +#include <linux/clk/renesas.h> #include <linux/clocksource.h> #include <linux/init.h> #include <linux/irq.h> diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 9eccde3c7b13..1c6fd11c2f82 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include <linux/clk/shmobile.h> +#include <linux/clk/renesas.h> #include <linux/clocksource.h> #include <linux/device.h> #include <linux/dma-contiguous.h> @@ -182,8 +182,6 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname, return 0; } -struct cma *rcar_gen2_dma_contiguous; - void __init rcar_gen2_reserve(void) { struct memory_reserve_config mrc; @@ -194,8 +192,11 @@ void __init rcar_gen2_reserve(void) of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); #ifdef CONFIG_DMA_CMA - if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) + if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) { + static struct cma *rcar_gen2_dma_contiguous; + dma_contiguous_reserve_area(mrc.size, mrc.base, 0, &rcar_gen2_dma_contiguous, true); + } #endif } diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index adbac6963f2b..3a732199cf5e 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -21,7 +21,9 @@ #include <linux/delay.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> + #include "common.h" +#include "emev2.h" #define EMEV2_SCU_BASE 0x1e000000 #define EMEV2_SMU_BASE 0xe0110000 @@ -45,8 +47,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) } /* setup EMEV2 specific SCU bits */ - shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(EMEV2_SCU_BASE, max_cpus); } const struct smp_operations emev2_smp_ops __initconst = { diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index b854fe2095ad..f5c31fbc10b2 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -92,12 +92,9 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { /* Map the reset vector (in headsmp-scu.S, headsmp.S) */ __raw_writel(__pa(shmobile_boot_vector), AVECR); - shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); - shmobile_boot_arg = (unsigned long)shmobile_scu_base; /* setup r8a7779 specific SCU bits */ - shmobile_scu_base = IOMEM(R8A7779_SCU_BASE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus); r8a7779_pm_init(); diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index ee1a4b70604b..41137404382e 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -52,8 +52,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(__pa(shmobile_boot_vector), SBAR); /* setup sh73a0 specific SCU bits */ - shmobile_scu_base = IOMEM(SH73A0_SCU_BASE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(SH73A0_SCU_BASE, max_cpus); } const struct smp_operations sh73a0_smp_ops __initconst = { diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index 5d92b5dd486b..74b30bade2c1 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -17,6 +17,8 @@ #include <asm/io.h> #include <asm/system_misc.h> +#include "common.h" + static int shmobile_suspend_default_enter(suspend_state_t suspend_state) { cpu_do_idle(); diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index c17d4d3881ff..ad008e4b0c49 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -18,6 +18,8 @@ #include <linux/delay.h> #include <linux/of_address.h> +#include "common.h" + static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, unsigned int mult, unsigned int div) { diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index b8f9e238e4ab..ed15db19e561 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -5,3 +5,5 @@ obj-y := socfpga.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_SOCFPGA_SUSPEND) += pm.o self-refresh.o +obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o +obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 5bc6ea87cdf7..575195be6687 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -36,6 +36,8 @@ extern void socfpga_init_clocks(void); extern void socfpga_sysmgr_init(void); +void socfpga_init_l2_ecc(void); +void socfpga_init_ocram_ecc(void); extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c new file mode 100644 index 000000000000..e3907ab58d05 --- /dev/null +++ b/arch/arm/mach-socfpga/l2_cache.c @@ -0,0 +1,41 @@ +/* + * Copyright Altera Corporation (C) 2016. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> + +void socfpga_init_l2_ecc(void) +{ + struct device_node *np; + void __iomem *mapped_l2_edac_addr; + + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-l2-ecc"); + if (!np) { + pr_err("Unable to find socfpga-l2-ecc in dtb\n"); + return; + } + + mapped_l2_edac_addr = of_iomap(np, 0); + of_node_put(np); + if (!mapped_l2_edac_addr) { + pr_err("Unable to find L2 ECC mapping in dtb\n"); + return; + } + + /* Enable ECC */ + writel(0x01, mapped_l2_edac_addr); + iounmap(mapped_l2_edac_addr); +} diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c new file mode 100644 index 000000000000..60ec643ac2be --- /dev/null +++ b/arch/arm/mach-socfpga/ocram.c @@ -0,0 +1,49 @@ +/* + * Copyright Altera Corporation (C) 2016. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/io.h> +#include <linux/genalloc.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#define ALTR_OCRAM_CLEAR_ECC 0x00000018 +#define ALTR_OCRAM_ECC_EN 0x00000019 + +void socfpga_init_ocram_ecc(void) +{ + struct device_node *np; + void __iomem *mapped_ocr_edac_addr; + + /* Find the OCRAM EDAC device tree node */ + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc"); + if (!np) { + pr_err("Unable to find socfpga-ocram-ecc\n"); + return; + } + + mapped_ocr_edac_addr = of_iomap(np, 0); + of_node_put(np); + if (!mapped_ocr_edac_addr) { + pr_err("Unable to map OCRAM ecc regs.\n"); + return; + } + + /* Clear any pending OCRAM ECC interrupts, then enable ECC */ + writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr); + writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr); + + iounmap(mapped_ocr_edac_addr); +} diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index cbb0a54df80a..07945748b571 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -94,6 +94,7 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus) scu_enable(socfpga_scu_base_addr); } +#ifdef CONFIG_HOTPLUG_CPU /* * platform-specific code to shutdown a CPU * @@ -116,6 +117,7 @@ static int socfpga_cpu_kill(unsigned int cpu) { return 1; } +#endif static const struct smp_operations socfpga_smp_ops __initconst = { .smp_prepare_cpus = socfpga_smp_prepare_cpus, diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index a1c0efaa8794..7e0aad2ec3d1 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -59,6 +59,11 @@ static void __init socfpga_init_irq(void) { irqchip_init(); socfpga_sysmgr_init(); + if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C)) + socfpga_init_l2_ecc(); + + if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) + socfpga_init_ocram_ecc(); } static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-spear/Makefile.boot b/arch/arm/mach-spear/Makefile.boot deleted file mode 100644 index 4674a4c221db..000000000000 --- a/arch/arm/mach-spear/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c index f2ad7723d034..ceee47735eec 100644 --- a/arch/arm/mach-stm32/board-dt.c +++ b/arch/arm/mach-stm32/board-dt.c @@ -10,6 +10,7 @@ static const char *const stm32_compat[] __initconst = { "st,stm32f429", + "st,stm32f469", NULL }; diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index c2be98f38e73..3c156190a1d4 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -69,6 +69,7 @@ MACHINE_END static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-a23", "allwinner,sun8i-a33", + "allwinner,sun8i-a83t", "allwinner,sun8i-h3", NULL, }; diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig index d6a3714b096e..ebe15b93bbe8 100644 --- a/arch/arm/mach-tango/Kconfig +++ b/arch/arm/mach-tango/Kconfig @@ -1,5 +1,6 @@ config ARCH_TANGO - bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7 + bool "Sigma Designs Tango4 (SMP87xx)" + depends on ARCH_MULTI_V7 # Cortex-A9 MPCore r3p0, PL310 r3p2 select ARCH_HAS_HOLES_MEMORYMODEL select ARM_ERRATA_754322 diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c index a18d5a34e2f5..a21f55e000d2 100644 --- a/arch/arm/mach-tango/platsmp.c +++ b/arch/arm/mach-tango/platsmp.c @@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -static struct smp_operations tango_smp_ops __initdata = { +static const struct smp_operations tango_smp_ops __initconst = { .smp_boot_secondary = tango_boot_secondary, }; diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 49d1110cff53..52db8bf7e153 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -17,23 +17,25 @@ * */ +#include <linux/property.h> #include <linux/gpio/machine.h> #include <linux/platform_device.h> -#include <linux/rfkill-gpio.h> #include "board.h" -static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = { - .name = "wifi_rfkill", - .type = RFKILL_TYPE_WLAN, +static struct property_entry __initdata wifi_rfkill_prop[] = { + PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), + PROPERTY_ENTRY_STRING("type", "wlan"), + { }, +}; + +static struct property_set __initdata wifi_rfkill_pset = { + .properties = wifi_rfkill_prop, }; static struct platform_device wifi_rfkill_device = { .name = "rfkill_gpio", .id = -1, - .dev = { - .platform_data = &wifi_rfkill_platform_data, - }, }; static struct gpiod_lookup_table wifi_gpio_lookup = { @@ -47,6 +49,7 @@ static struct gpiod_lookup_table wifi_gpio_lookup = { void __init tegra_paz00_wifikill_init(void) { + platform_device_add_properties(&wifi_rfkill_device, &wifi_rfkill_pset); gpiod_add_lookup_table(&wifi_gpio_lookup); platform_device_register(&wifi_rfkill_device); } diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot deleted file mode 100644 index 87811de0bd94..000000000000 --- a/arch/arm/mach-u300/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x48008000 -params_phys-y := 0x48000100 -# This isn't used. -#initrd_phys-y := 0x48800000 diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index e1cfc1d6e2f4..69141357afe8 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -30,7 +30,7 @@ * The secondary CPUs check this register from the boot ROM for the jump * destination. After that, it can be reused as a scratch register. */ -#define UNIPHIER_SBC_ROM_BOOT_RSV2 0x1208 +#define UNIPHIER_SMPCTRL_ROM_RSV2 0x208 static void __iomem *uniphier_smp_rom_boot_rsv2; static unsigned int uniphier_smp_max_cpus; @@ -98,16 +98,24 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) phys_addr_t rom_rsv2_phys; int ret; - np = of_find_compatible_node(NULL, NULL, - "socionext,uniphier-system-bus-controller"); - ret = of_address_to_resource(np, 1, &res); - if (ret) { - pr_err("failed to get resource of system-bus-controller\n"); - return ret; + np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl"); + of_node_put(np); + ret = of_address_to_resource(np, 0, &res); + if (!ret) { + rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2; + } else { + /* try old binding too */ + np = of_find_compatible_node(NULL, NULL, + "socionext,uniphier-system-bus-controller"); + of_node_put(np); + ret = of_address_to_resource(np, 1, &res); + if (ret) { + pr_err("failed to get resource of SMP control\n"); + return ret; + } + rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2; } - rom_rsv2_phys = res.start + UNIPHIER_SBC_ROM_BOOT_RSV2; - ret = uniphier_smp_copy_trampoline(rom_rsv2_phys); if (ret) return ret; diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-ux500/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index a0ffaad1fb61..a557955472ea 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -76,17 +76,19 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { static const char *db8500_read_soc_id(void) { void __iomem *uid; + const char *retstr; uid = ioremap(U8500_BB_UID_BASE, 0x20); if (!uid) return NULL; /* Throw these device-specific numbers into the entropy pool */ add_device_randomness(uid, 0x14); - return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+0), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); iounmap(uid); + return retstr; } static struct device * __init db8500_soc_device_init(void) diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index e40f777ccf7d..b0cc26284fc9 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -8,8 +8,11 @@ config ARCH_VERSATILE select COMMON_CLK_VERSATILE select CPU_ARM926T select ICST + select MFD_SYSCON select MIGHT_HAVE_PCI select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE select VERSATILE_FPGA_IRQ help This enables support for ARM Ltd Versatile board. diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index c44871851255..dff1c0595b67 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -52,8 +52,6 @@ * Versatile Registers * ------------------------------------------------------------------------ */ -#define VERSATILE_SYS_LOCK_OFFSET 0x20 -#define VERSATILE_SYS_RESETCTL_OFFSET 0x40 #define VERSATILE_SYS_PCICTL_OFFSET 0x44 #define VERSATILE_SYS_MCI_OFFSET 0x48 #define VERSATILE_SYS_FLASH_OFFSET 0x4C @@ -345,18 +343,6 @@ static void __init versatile_init_early(void) __io_address(VERSATILE_SCTL_BASE)); } -static void versatile_restart(enum reboot_mode mode, const char *cmd) -{ - u32 val; - - val = readl(versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET); - val |= 0x105; - - writel(0xa05f, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET); - writel(val, versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET); - writel(0, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET); -} - static void __init versatile_dt_pci_init(void) { u32 val; @@ -420,5 +406,4 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") .init_early = versatile_init_early, .init_machine = versatile_dt_init, .dt_compat = versatile_dt_match, - .restart = versatile_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c index ba05aec7ea4b..55d1a00dbd28 100644 --- a/arch/arm/mach-w90x900/gpio.c +++ b/arch/arm/mach-w90x900/gpio.c @@ -20,7 +20,7 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> @@ -30,7 +30,6 @@ #define GPIO_IN (0x0C) #define GROUPINERV (0x10) #define GPIO_GPIO(Nb) (0x00000001 << (Nb)) -#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip) #define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \ { \ @@ -53,7 +52,7 @@ struct nuc900_gpio_chip { static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_IN; unsigned int regval; @@ -65,7 +64,7 @@ static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset) static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT; unsigned int regval; unsigned long flags; @@ -86,7 +85,7 @@ static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val) static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR; unsigned int regval; unsigned long flags; @@ -104,7 +103,7 @@ static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset) static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT; void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR; unsigned int regval; @@ -149,6 +148,6 @@ void __init nuc900_init_gpio(int nr_group) gpio_chip = &nuc900_gpio[i]; spin_lock_init(&gpio_chip->gpio_lock); gpio_chip->regbase = GPIO_BASE + i * GROUPINERV; - gpiochip_add(&gpio_chip->chip); + gpiochip_add_data(&gpio_chip->chip, gpio_chip); } } diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 4b7c324ff664..3855ecebda6e 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -27,7 +27,7 @@ #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) static volatile u32 * const uart_base = (u32 *)UART0_PA; -static void putc(int ch) +static inline void putc(int ch) { /* Check THRE and TEMT bits before we transmit the character. */ diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-zynq/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 6f39d03cc27e..860ffb663f02 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -150,8 +150,6 @@ out: static void __init zynq_timer_init(void) { - zynq_early_slcr_init(); - zynq_clock_init(); of_clk_init(NULL); clocksource_probe(); @@ -186,6 +184,7 @@ static void __init zynq_map_io(void) static void __init zynq_irq_init(void) { + zynq_early_slcr_init(); irqchip_init(); } diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index 26320ebf3493..f0292a30e6f6 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -28,6 +28,7 @@ #define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */ #define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */ #define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */ +#define SLCR_L2C_RAM 0xA1C /* L2C_RAM in AR#54190 */ #define SLCR_UNLOCK_MAGIC 0xDF0D #define SLCR_A9_CPU_CLKSTOP 0x10 @@ -227,6 +228,9 @@ int __init zynq_early_slcr_init(void) /* unlock the SLCR so that registers can be changed */ zynq_slcr_unlock(); + /* See AR#54190 design advisory */ + regmap_update_bits(zynq_slcr_regmap, SLCR_L2C_RAM, 0x70707, 0x20202); + register_restart_handler(&zynq_slcr_restart_nb); pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 549f6d3aec5b..55347662e5ed 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1037,24 +1037,26 @@ config ARCH_SUPPORTS_BIG_ENDIAN This option specifies the architecture can support big endian operation. -config ARM_KERNMEM_PERMS - bool "Restrict kernel memory permissions" - depends on MMU - help - If this is set, kernel memory other than kernel text (and rodata) - will be made non-executable. The tradeoff is that each region is - padded to section-size (1MiB) boundaries (because their permissions - are different and splitting the 1M pages into 4K ones causes TLB - performance problems), wasting memory. - config DEBUG_RODATA bool "Make kernel text and rodata read-only" - depends on ARM_KERNMEM_PERMS + depends on MMU && !XIP_KERNEL + default y if CPU_V7 + help + If this is set, kernel text and rodata memory will be made + read-only, and non-text kernel memory will be made non-executable. + The tradeoff is that each region is padded to section-size (1MiB) + boundaries (because their permissions are different and splitting + the 1M pages into 4K ones causes TLB performance problems), which + can waste memory. + +config DEBUG_ALIGN_RODATA + bool "Make rodata strictly non-executable" + depends on DEBUG_RODATA default y help - If this is set, kernel text and rodata will be made read-only. This - is to help catch accidental or malicious attempts to change the - kernel's executable code. Additionally splits rodata from kernel - text so it can be made explicitly non-executable. This creates - another section-size padded region, so it can waste more memory - space while gaining the read-only protections. + If this is set, rodata will be made explicitly non-executable. This + provides protection on the rare chance that attackers might find and + use ROP gadgets that exist in the rodata section. This adds an + additional section-aligned split of rodata from kernel text so it + can be made explicitly non-executable. This padding may waste memory + space to gain the additional protection. diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index 1e373d268c04..88255bea65e4 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -22,6 +22,11 @@ #include <asm/cputype.h> #include <asm/hardware/cache-tauros2.h> +/* CP15 PJ4 Control configuration register */ +#define CCR_L2C_PREFETCH_DISABLE BIT(24) +#define CCR_L2C_ECC_ENABLE BIT(23) +#define CCR_L2C_WAY7_4_DISABLE BIT(21) +#define CCR_L2C_BURST8_ENABLE BIT(20) /* * When Tauros2 is used on a CPU that supports the v7 hierarchical @@ -182,18 +187,18 @@ static void enable_extra_feature(unsigned int features) u = read_extra_features(); if (features & CACHE_TAUROS2_PREFETCH_ON) - u &= ~0x01000000; + u &= ~CCR_L2C_PREFETCH_DISABLE; else - u |= 0x01000000; + u |= CCR_L2C_PREFETCH_DISABLE; pr_info("Tauros2: %s L2 prefetch.\n", (features & CACHE_TAUROS2_PREFETCH_ON) ? "Enabling" : "Disabling"); if (features & CACHE_TAUROS2_LINEFILL_BURST8) - u |= 0x00100000; + u |= CCR_L2C_BURST8_ENABLE; else - u &= ~0x00100000; - pr_info("Tauros2: %s line fill burt8.\n", + u &= ~CCR_L2C_BURST8_ENABLE; + pr_info("Tauros2: %s burst8 line fill.\n", (features & CACHE_TAUROS2_LINEFILL_BURST8) ? "Enabling" : "Disabling"); @@ -287,16 +292,15 @@ void __init tauros2_init(unsigned int features) node = of_find_matching_node(NULL, tauros2_ids); if (!node) { pr_info("Not found marvell,tauros2-cache, disable it\n"); - return; + } else { + ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f); + if (ret) { + pr_info("Not found marvell,tauros-cache-features property, " + "disable extra features\n"); + features = 0; + } else + features = f; } - - ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f); - if (ret) { - pr_info("Not found marvell,tauros-cache-features property, " - "disable extra features\n"); - features = 0; - } else - features = f; #endif tauros2_internal_init(features); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0eca3812527e..deac58d5f1f7 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -42,6 +42,55 @@ #include "dma.h" #include "mm.h" +struct arm_dma_alloc_args { + struct device *dev; + size_t size; + gfp_t gfp; + pgprot_t prot; + const void *caller; + bool want_vaddr; +}; + +struct arm_dma_free_args { + struct device *dev; + size_t size; + void *cpu_addr; + struct page *page; + bool want_vaddr; +}; + +struct arm_dma_allocator { + void *(*alloc)(struct arm_dma_alloc_args *args, + struct page **ret_page); + void (*free)(struct arm_dma_free_args *args); +}; + +struct arm_dma_buffer { + struct list_head list; + void *virt; + struct arm_dma_allocator *allocator; +}; + +static LIST_HEAD(arm_dma_bufs); +static DEFINE_SPINLOCK(arm_dma_bufs_lock); + +static struct arm_dma_buffer *arm_dma_buffer_find(void *virt) +{ + struct arm_dma_buffer *buf, *found = NULL; + unsigned long flags; + + spin_lock_irqsave(&arm_dma_bufs_lock, flags); + list_for_each_entry(buf, &arm_dma_bufs, list) { + if (buf->virt == virt) { + list_del(&buf->list); + found = buf; + break; + } + } + spin_unlock_irqrestore(&arm_dma_bufs_lock, flags); + return found; +} + /* * The DMA API is built upon the notion of "buffer ownership". A buffer * is either exclusively owned by the CPU (and therefore may be accessed @@ -592,7 +641,7 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv) NULL #define __alloc_from_pool(size, ret_page) NULL #define __alloc_from_contiguous(dev, size, prot, ret, c, wv) NULL -#define __free_from_pool(cpu_addr, size) 0 +#define __free_from_pool(cpu_addr, size) do { } while (0) #define __free_from_contiguous(dev, page, cpu_addr, size, wv) do { } while (0) #define __dma_free_remap(cpu_addr, size) do { } while (0) @@ -610,7 +659,78 @@ static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp, return page_address(page); } +static void *simple_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_simple_buffer(args->dev, args->size, args->gfp, + ret_page); +} + +static void simple_allocator_free(struct arm_dma_free_args *args) +{ + __dma_free_buffer(args->page, args->size); +} +static struct arm_dma_allocator simple_allocator = { + .alloc = simple_allocator_alloc, + .free = simple_allocator_free, +}; + +static void *cma_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_from_contiguous(args->dev, args->size, args->prot, + ret_page, args->caller, + args->want_vaddr); +} + +static void cma_allocator_free(struct arm_dma_free_args *args) +{ + __free_from_contiguous(args->dev, args->page, args->cpu_addr, + args->size, args->want_vaddr); +} + +static struct arm_dma_allocator cma_allocator = { + .alloc = cma_allocator_alloc, + .free = cma_allocator_free, +}; + +static void *pool_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_from_pool(args->size, ret_page); +} + +static void pool_allocator_free(struct arm_dma_free_args *args) +{ + __free_from_pool(args->cpu_addr, args->size); +} + +static struct arm_dma_allocator pool_allocator = { + .alloc = pool_allocator_alloc, + .free = pool_allocator_free, +}; + +static void *remap_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_remap_buffer(args->dev, args->size, args->gfp, + args->prot, ret_page, args->caller, + args->want_vaddr); +} + +static void remap_allocator_free(struct arm_dma_free_args *args) +{ + if (args->want_vaddr) + __dma_free_remap(args->cpu_addr, args->size); + + __dma_free_buffer(args->page, args->size); +} + +static struct arm_dma_allocator remap_allocator = { + .alloc = remap_allocator_alloc, + .free = remap_allocator_free, +}; static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, @@ -619,7 +739,16 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, u64 mask = get_coherent_dma_mask(dev); struct page *page = NULL; void *addr; - bool want_vaddr; + bool allowblock, cma; + struct arm_dma_buffer *buf; + struct arm_dma_alloc_args args = { + .dev = dev, + .size = PAGE_ALIGN(size), + .gfp = gfp, + .prot = prot, + .caller = caller, + .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs), + }; #ifdef CONFIG_DMA_API_DEBUG u64 limit = (mask + 1) & ~mask; @@ -633,6 +762,10 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (!mask) return NULL; + buf = kzalloc(sizeof(*buf), gfp); + if (!buf) + return NULL; + if (mask < 0xffffffffULL) gfp |= GFP_DMA; @@ -644,28 +777,37 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, * platform; see CONFIG_HUGETLBFS. */ gfp &= ~(__GFP_COMP); + args.gfp = gfp; *handle = DMA_ERROR_CODE; - size = PAGE_ALIGN(size); - want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs); - - if (nommu()) - addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (dev_get_cma_area(dev) && (gfp & __GFP_DIRECT_RECLAIM)) - addr = __alloc_from_contiguous(dev, size, prot, &page, - caller, want_vaddr); - else if (is_coherent) - addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (!gfpflags_allow_blocking(gfp)) - addr = __alloc_from_pool(size, &page); + allowblock = gfpflags_allow_blocking(gfp); + cma = allowblock ? dev_get_cma_area(dev) : false; + + if (cma) + buf->allocator = &cma_allocator; + else if (nommu() || is_coherent) + buf->allocator = &simple_allocator; + else if (allowblock) + buf->allocator = &remap_allocator; else - addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, - caller, want_vaddr); + buf->allocator = &pool_allocator; + + addr = buf->allocator->alloc(&args, &page); + + if (page) { + unsigned long flags; - if (page) *handle = pfn_to_dma(dev, page_to_pfn(page)); + buf->virt = args.want_vaddr ? addr : page; + + spin_lock_irqsave(&arm_dma_bufs_lock, flags); + list_add(&buf->list, &arm_dma_bufs); + spin_unlock_irqrestore(&arm_dma_bufs_lock, flags); + } else { + kfree(buf); + } - return want_vaddr ? addr : page; + return args.want_vaddr ? addr : page; } /* @@ -741,25 +883,21 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, bool is_coherent) { struct page *page = pfn_to_page(dma_to_pfn(dev, handle)); - bool want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs); - - size = PAGE_ALIGN(size); - - if (nommu()) { - __dma_free_buffer(page, size); - } else if (!is_coherent && __free_from_pool(cpu_addr, size)) { + struct arm_dma_buffer *buf; + struct arm_dma_free_args args = { + .dev = dev, + .size = PAGE_ALIGN(size), + .cpu_addr = cpu_addr, + .page = page, + .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs), + }; + + buf = arm_dma_buffer_find(cpu_addr); + if (WARN(!buf, "Freeing invalid buffer %p\n", cpu_addr)) return; - } else if (!dev_get_cma_area(dev)) { - if (want_vaddr && !is_coherent) - __dma_free_remap(cpu_addr, size); - __dma_free_buffer(page, size); - } else { - /* - * Non-atomic allocations cannot be freed with IRQs disabled - */ - WARN_ON(irqs_disabled()); - __free_from_contiguous(dev, page, cpu_addr, size, want_vaddr); - } + + buf->allocator->free(&args); + kfree(buf); } void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, @@ -1122,6 +1260,9 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, spin_unlock_irqrestore(&mapping->lock, flags); } +/* We'll try 2M, 1M, 64K, and finally 4K; array must end with 0! */ +static const int iommu_order_array[] = { 9, 8, 4, 0 }; + static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t gfp, struct dma_attrs *attrs) { @@ -1129,6 +1270,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, int count = size >> PAGE_SHIFT; int array_size = count * sizeof(struct page *); int i = 0; + int order_idx = 0; if (array_size <= PAGE_SIZE) pages = kzalloc(array_size, GFP_KERNEL); @@ -1154,6 +1296,10 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, return pages; } + /* Go straight to 4K chunks if caller says it's OK. */ + if (dma_get_attr(DMA_ATTR_ALLOC_SINGLE_PAGES, attrs)) + order_idx = ARRAY_SIZE(iommu_order_array) - 1; + /* * IOMMU can map any pages, so himem can also be used here */ @@ -1162,22 +1308,24 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, while (count) { int j, order; - for (order = __fls(count); order > 0; --order) { - /* - * We do not want OOM killer to be invoked as long - * as we can fall back to single pages, so we force - * __GFP_NORETRY for orders higher than zero. - */ - pages[i] = alloc_pages(gfp | __GFP_NORETRY, order); - if (pages[i]) - break; + order = iommu_order_array[order_idx]; + + /* Drop down when we get small */ + if (__fls(count) < order) { + order_idx++; + continue; } - if (!pages[i]) { - /* - * Fall back to single page allocation. - * Might invoke OOM killer as last resort. - */ + if (order) { + /* See if it's easy to allocate a high-order chunk */ + pages[i] = alloc_pages(gfp | __GFP_NORETRY, order); + + /* Go down a notch at first sign of pressure */ + if (!pages[i]) { + order_idx++; + continue; + } + } else { pages[i] = alloc_pages(gfp, 0); if (!pages[i]) goto error; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index daafcf121ce0..ad5841856007 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -346,7 +346,7 @@ retry: up_read(&mm->mmap_sem); /* - * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR + * Handle the "normal" case first - VM_FAULT_MAJOR */ if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) return 0; diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index d65909697165..bd274a05b8ff 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -15,7 +15,7 @@ * page tables. */ pgd_t *idmap_pgd; -phys_addr_t (*arch_virt_to_idmap) (unsigned long x); +unsigned long (*arch_virt_to_idmap)(unsigned long x); #ifdef CONFIG_ARM_LPAE static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 49bd08178008..370581aeb871 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -572,8 +572,9 @@ void __init mem_init(void) } } -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA struct section_perm { + const char *name; unsigned long start; unsigned long end; pmdval_t mask; @@ -581,9 +582,13 @@ struct section_perm { pmdval_t clear; }; +/* First section-aligned location at or after __start_rodata. */ +extern char __start_rodata_section_aligned[]; + static struct section_perm nx_perms[] = { /* Make pages tables, etc before _stext RW (set NX). */ { + .name = "pre-text NX", .start = PAGE_OFFSET, .end = (unsigned long)_stext, .mask = ~PMD_SECT_XN, @@ -591,26 +596,26 @@ static struct section_perm nx_perms[] = { }, /* Make init RW (set NX). */ { + .name = "init NX", .start = (unsigned long)__init_begin, .end = (unsigned long)_sdata, .mask = ~PMD_SECT_XN, .prot = PMD_SECT_XN, }, -#ifdef CONFIG_DEBUG_RODATA /* Make rodata NX (set RO in ro_perms below). */ { - .start = (unsigned long)__start_rodata, + .name = "rodata NX", + .start = (unsigned long)__start_rodata_section_aligned, .end = (unsigned long)__init_begin, .mask = ~PMD_SECT_XN, .prot = PMD_SECT_XN, }, -#endif }; -#ifdef CONFIG_DEBUG_RODATA static struct section_perm ro_perms[] = { /* Make kernel code and rodata RX (set RO). */ { + .name = "text/rodata RO", .start = (unsigned long)_stext, .end = (unsigned long)__init_begin, #ifdef CONFIG_ARM_LPAE @@ -623,7 +628,6 @@ static struct section_perm ro_perms[] = { #endif }, }; -#endif /* * Updates section permissions only for the current mm (sections are @@ -670,8 +674,8 @@ void set_section_perms(struct section_perm *perms, int n, bool set, for (i = 0; i < n; i++) { if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) || !IS_ALIGNED(perms[i].end, SECTION_SIZE)) { - pr_err("BUG: section %lx-%lx not aligned to %lx\n", - perms[i].start, perms[i].end, + pr_err("BUG: %s section %lx-%lx not aligned to %lx\n", + perms[i].name, perms[i].start, perms[i].end, SECTION_SIZE); continue; } @@ -712,7 +716,6 @@ void fix_kernmem_perms(void) stop_machine(__fix_kernmem_perms, NULL, NULL); } -#ifdef CONFIG_DEBUG_RODATA int __mark_rodata_ro(void *unused) { update_sections_early(ro_perms, ARRAY_SIZE(ro_perms)); @@ -735,11 +738,10 @@ void set_kernel_text_ro(void) set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true, current->active_mm); } -#endif /* CONFIG_DEBUG_RODATA */ #else static inline void fix_kernmem_perms(void) { } -#endif /* CONFIG_ARM_KERNMEM_PERMS */ +#endif /* CONFIG_DEBUG_RODATA */ void free_tcmmem(void) { diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 4b4058db0781..66353caa35b9 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -173,7 +173,7 @@ unsigned long arch_mmap_rnd(void) { unsigned long rnd; - rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1); + rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1); return rnd << PAGE_SHIFT; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 434d76f0b363..62f4d01941f7 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -732,7 +732,7 @@ static void *__init late_alloc(unsigned long sz) return ptr; } -static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr, +static pte_t * __init arm_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot, void *(*alloc)(unsigned long sz)) { @@ -747,7 +747,7 @@ static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr, static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) { - return pte_alloc(pmd, addr, prot, early_alloc); + return arm_pte_alloc(pmd, addr, prot, early_alloc); } static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, @@ -756,7 +756,7 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, void *(*alloc)(unsigned long sz), bool ng) { - pte_t *pte = pte_alloc(pmd, addr, type->prot_l1, alloc); + pte_t *pte = arm_pte_alloc(pmd, addr, type->prot_l1, alloc); do { set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), ng ? PTE_EXT_NG : 0); @@ -1253,7 +1253,7 @@ static inline void prepare_page_table(void) #ifdef CONFIG_XIP_KERNEL /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK; + addr = ((unsigned long)_exiprom + PMD_SIZE - 1) & PMD_MASK; #endif for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); @@ -1335,7 +1335,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc) #ifdef CONFIG_XIP_KERNEL map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); map.virtual = MODULES_VADDR; - map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; + map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK; map.type = MT_ROM; create_mapping(&map); #endif @@ -1426,7 +1426,11 @@ static void __init kmap_init(void) static void __init map_lowmem(void) { struct memblock_region *reg; +#ifdef CONFIG_XIP_KERNEL + phys_addr_t kernel_x_start = round_down(__pa(_sdata), SECTION_SIZE); +#else phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE); +#endif phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE); /* Map all the lowmem memory banks. */ diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c index cf30daff8932..d19b1ad29b07 100644 --- a/arch/arm/mm/pageattr.c +++ b/arch/arm/mm/pageattr.c @@ -49,6 +49,9 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } + if (!numpages) + return 0; + if (start < MODULES_VADDR || start >= MODULES_END) return -EINVAL; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index e683db1b90a3..b8d477321730 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -80,7 +80,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm) if (!new_pmd) goto no_pmd; - new_pte = pte_alloc_map(mm, NULL, new_pmd, 0); + new_pte = pte_alloc_map(mm, new_pmd, 0); if (!new_pte) goto no_pte; diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0f92d575a304..0f8963a7e7d9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -487,7 +487,7 @@ __errata_finish: .align 2 __v7_setup_stack_ptr: - .word __v7_setup_stack - . + .word PHYS_RELATIVE(__v7_setup_stack, .) ENDPROC(__v7_setup) .bss diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 7bd22d8e5b11..f74069386c13 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -154,8 +154,7 @@ err_out: */ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); if (orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK) || orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK)) @@ -166,8 +165,7 @@ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; if (!orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK)) @@ -182,8 +180,7 @@ static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) static int orion_gpio_get(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); int val; if (readl(GPIO_IO_CONF(ochip)) & (1 << pin)) { @@ -198,8 +195,7 @@ static int orion_gpio_get(struct gpio_chip *chip, unsigned pin) static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; if (!orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK)) @@ -216,8 +212,7 @@ orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value) static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; spin_lock_irqsave(&ochip->lock, flags); @@ -227,8 +222,7 @@ static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value) static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); return irq_create_mapping(ochip->domain, ochip->secondary_irq_base + pin); @@ -445,8 +439,8 @@ static void gpio_irq_handler(struct irq_desc *desc) static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk; int i; @@ -567,7 +561,7 @@ void __init orion_gpio_init(struct device_node *np, ochip->mask_offset = mask_offset; ochip->secondary_irq_base = secondary_irq_base; - gpiochip_add(&ochip->chip); + gpiochip_add_data(&ochip->chip, ochip); /* * Mask and clear GPIO interrupts. diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 8085a8aac812..ffb93db68e9c 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/sched_clock.h> #include <plat/time.h> +#include <asm/delay.h> /* * MBus bridge block registers. @@ -188,6 +189,15 @@ orion_time_set_base(void __iomem *_timer_base) timer_base = _timer_base; } +static unsigned long orion_delay_timer_read(void) +{ + return ~readl(timer_base + TIMER0_VAL_OFF); +} + +static struct delay_timer orion_delay_timer = { + .read_current_timer = orion_delay_timer_read, +}; + void __init orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, unsigned int irq, unsigned int tclk) @@ -202,6 +212,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, ticks_per_jiffy = (tclk + HZ/2) / HZ; + orion_delay_timer.freq = tclk; + register_current_timer_delay(&orion_delay_timer); + /* * Set scale and timer for sched_clock. */ diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h index 28848b344e2d..ceba3e4184fc 100644 --- a/arch/arm/plat-pxa/include/plat/dma.h +++ b/arch/arm/plat-pxa/include/plat/dma.h @@ -95,6 +95,6 @@ static inline int pxad_toggle_reserved_channel(int legacy_channel) } #endif -extern void __init pxa2xx_set_dmac_info(int nb_channels); +extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors); #endif /* __PLAT_DMA_H */ diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index efa6e85619ad..daf3db9f0058 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -422,8 +422,7 @@ static int s3c_adc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int s3c_adc_suspend(struct device *dev) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct adc_device *adc = platform_get_drvdata(pdev); unsigned long flags; u32 con; @@ -444,8 +443,7 @@ static int s3c_adc_suspend(struct device *dev) static int s3c_adc_resume(struct device *dev) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct adc_device *adc = platform_get_drvdata(pdev); enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data; int ret; diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index b53d4ff3befb..84baa16f4c0b 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -727,15 +727,6 @@ static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set) return -ENOMEM; } - if (set->ecc_layout) { - ptr = kmemdup(set->ecc_layout, - sizeof(struct nand_ecclayout), GFP_KERNEL); - set->ecc_layout = ptr; - - if (!ptr) - return -ENOMEM; - } - return 0; } diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h index c0c70a895ca8..6feedd47d875 100644 --- a/arch/arm/plat-samsung/include/plat/map-s3c.h +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -27,10 +27,6 @@ #define S3C2410_PA_UART (0x50000000) #define S3C24XX_PA_UART S3C2410_PA_UART -#ifndef S3C_UART_OFFSET -#define S3C_UART_OFFSET (0x400) -#endif - /* * GPIO ports * diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index f5cf2bd208e0..4ec9a7050185 100644 --- a/arch/arm/plat-samsung/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -23,7 +23,6 @@ #define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) #define S5P_VA_SCU S5P_VA_COREPERI(0x0) -#define S5P_VA_TWD S5P_VA_COREPERI(0x600) #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) @@ -31,10 +30,6 @@ #define VA_VIC2 VA_VIC(2) #define VA_VIC3 VA_VIC(3) -#ifndef S3C_UART_OFFSET -#define S3C_UART_OFFSET (0x400) -#endif - #include <plat/map-s3c.h> #endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 04aff2c31b46..70f2f699bed3 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -53,8 +53,8 @@ static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) if (ptr->child != NULL) s3c_pm_run_res(ptr->child, fn, arg); - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { + if ((ptr->flags & IORESOURCE_SYSTEM_RAM) + == IORESOURCE_SYSTEM_RAM) { S3C_PMDBG("Found system RAM at %08lx..%08lx\n", (unsigned long)ptr->start, (unsigned long)ptr->end); diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 49b8ef91584a..98b9b8e9f698 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -1,8 +1,5 @@ if PLAT_VERSATILE -config PLAT_VERSATILE_CLOCK - bool - config PLAT_VERSATILE_SCHED_CLOCK bool diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 03c4900ac3f4..bff3ba889882 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,5 +1,4 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/clock.c b/arch/arm/plat-versatile/clock.c deleted file mode 100644 index 5c8b6564fdc2..000000000000 --- a/arch/arm/plat-versatile/clock.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/arm/plat-versatile/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/hardware/icst.h> - -#include <mach/clkdev.h> - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - long ret = -EIO; - if (clk->ops && clk->ops->round) - ret = clk->ops->round(clk, rate); - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - if (clk->ops && clk->ops->set) - ret = clk->ops->set(clk, rate); - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -long icst_clk_round(struct clk *clk, unsigned long rate) -{ - struct icst_vco vco; - vco = icst_hz_to_vco(clk->params, rate); - return icst_hz(clk->params, vco); -} -EXPORT_SYMBOL(icst_clk_round); - -int icst_clk_set(struct clk *clk, unsigned long rate) -{ - struct icst_vco vco; - - vco = icst_hz_to_vco(clk->params, rate); - clk->rate = icst_hz(clk->params, vco); - clk->ops->setvco(clk, vco); - - return 0; -} -EXPORT_SYMBOL(icst_clk_set); diff --git a/arch/arm/vdso/vdso.S b/arch/arm/vdso/vdso.S index b2b97e3e7bab..a62a7b64f49c 100644 --- a/arch/arm/vdso/vdso.S +++ b/arch/arm/vdso/vdso.S @@ -23,9 +23,8 @@ #include <linux/const.h> #include <asm/page.h> - __PAGE_ALIGNED_DATA - .globl vdso_start, vdso_end + .section .data..ro_after_init .balign PAGE_SIZE vdso_start: .incbin "arch/arm/vdso/vdso.so" |