summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2014-08-23 10:11:26 +0100
committerShawn Guo <shawn.guo@freescale.com>2014-08-25 19:11:16 +0800
commitf9908c178c273728166ccc21544821a42015f81d (patch)
tree69d5fab611f141b4fd6f4b439201a4627454f464 /arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
parent090727b880ff3c56e333f267cc24ab076f3bc096 (diff)
ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration
Hummingboard has no over current hardware, so disable the over current detection for both ports. Cubox-i has over current hardware, so appropriately configure this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-cubox-i.dtsi')
-rw-r--r--arch/arm/boot/dts/imx6qdl-cubox-i.dtsi17
1 files changed, 13 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index e8e781656b3f..298d0fdf8ebe 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -130,16 +130,23 @@
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
+ pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+ fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+ };
+
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
};
- pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+ pinctrl_cubox_i_usbotg: cubox-i-usbotg {
/*
- * The Cubox-i pulls this low, but as it's pointless
+ * The Cubox-i pulls ID low, but as it's pointless
* leaving it as a pull-up, even if it is just 10uA.
*/
- fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ >;
};
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@
};
&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
vbus-supply = <&reg_usbh1_vbus>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+ pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};