summaryrefslogtreecommitdiff
path: root/net/ceph/mon_client.c
AgeCommit message (Collapse)Author
2017-11-13ceph: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> [idryomov@gmail.com: amended "Older OSDs" comment] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-06ceph: more accurate statfsDouglas Fuller
Improve accuracy of statfs reporting for Ceph filesystems comprising exactly one data pool. In this case, the Ceph monitor can now report the space usage for the single data pool instead of the global data for the entire Ceph cluster. Include support for this message in mon_client and leverage it in ceph/super. Signed-off-by: Douglas Fuller <dfuller@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: support SERVER_JEWEL feature bitsIlya Dryomov
Only MON_STATEFUL_SUB, really. MON_ROUTE_OSDMAP and OSDSUBOP_NO_SNAPCONTEXT are irrelevant. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-23libceph: drop version variable from ceph_monmap_decode()Ilya Dryomov
It's set but not used: CEPH_FEATURE_MONNAMES feature bit isn't advertised, which guarantees a v1 MonMap. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2016-12-12libceph: no need for GFP_NOFS in ceph_monc_init()Ilya Dryomov
It's called during inital setup, when everything should be allocated with GFP_KERNEL. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-08-24libceph: support for blacklisting clientsDouglas Fuller
Reuse ceph_mon_generic_request infrastructure for sending monitor commands. In particular, add support for 'blacklist add' to prevent other, non-responsive clients from making further updates. Signed-off-by: Douglas Fuller <dfuller@redhat.com> [idryomov@gmail.com: refactor, misc fixes throughout] Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org>
2016-08-08libceph: make cancel_generic_request() staticWei Yongjun
Fixes the following sparse warning: net/ceph/mon_client.c:577:6: warning: symbol 'cancel_generic_request' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-07-28libceph: fsmap.user subscription supportYan, Zheng
Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: support for subscribing to "mdsmap.<id>" mapsIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: replace ceph_monc_request_next_osdmap()Ilya Dryomov
... with a wrapper around maybe_request_map() - no need for two osdmap-specific functions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: async MON client generic requestsIlya Dryomov
For map check, we are going to need to send CEPH_MSG_MON_GET_VERSION messages asynchronously and get a callback on completion. Refactor MON client to allow firing off generic requests asynchronously and add an async variant of ceph_monc_get_version(). ceph_monc_do_statfs() is switched over and remains sync. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: handle_one_map()Ilya Dryomov
Separate osdmap handling from decoding and iterating over a bag of maps in a fresh MOSDMap message. This sets up the scene for the updated OSD client. Of particular importance here is the addition of pi->was_full, which can be used to answer "did this pool go full -> not-full in this map?". This is the key bit for supporting pool quotas. We won't be able to downgrade map_sem for much longer, so drop downgrade_write(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: DEFINE_RB_FUNCS macroIlya Dryomov
Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: nuke unused fields and functionsIlya Dryomov
Either unused or useless: osdmap->mkfs_epoch osd->o_marked_for_keepalive monc->num_generic_requests osdc->map_waiters osdc->last_requested_map osdc->timeout_tid osd_req_op_cls_response_data() osdmap_apply_incremental() @msgr arg Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: behave in mon_fault() if cur_mon < 0Ilya Dryomov
This can happen if __close_session() in ceph_monc_stop() races with a connection reset. We need to ignore such faults, otherwise it's likely we would take !hunting, call __schedule_delayed() and end up with delayed_work() executing on invalid memory, among other things. The (two!) con->private tests are useless, as nothing ever clears con->private. Nuke them. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: reschedule tick in mon_fault()Ilya Dryomov
Doing __schedule_delayed() in the hunting branch is pointless, as the tick will have already been scheduled by then. What we need to do instead is *reschedule* it in the !hunting branch, after reopen_session() changes hunt_mult, which affects the delay. This helps with spacing out connection attempts and avoiding things like two back-to-back attempts followed by a longer period of waiting around. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: introduce and switch to reopen_session()Ilya Dryomov
hunting is now set in __open_session() and cleared in finish_hunting(), instead of all around. The "session lost" message is printed not only on connection resets, but also on keepalive timeouts. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: monc hunt rate is 3s with backoff up to 30sIlya Dryomov
Unless we are in the process of setting up a client (i.e. connecting to the monitor cluster for the first time), apply a backoff: every time we want to reopen a session, increase our timeout by a multiple (currently 2); when we complete the connection, reduce that multipler by 50%. Mirrors ceph.git commit 794c86fd289bd62a35ed14368fa096c46736e9a2. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: monc ping rate is 10sIlya Dryomov
Split ping interval and ping timeout: ping interval is 10s; keepalive timeout is 30s. Make monc_ping_timeout a constant while at it - it's not actually exported as a mount option (and the rest of tick-related settings won't be either), so it's got no place in ceph_options. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: pick a different monitor when reconnectingIlya Dryomov
Don't try to reconnect to the same monitor when we fail to establish a session within a timeout or it's lost. For that, pick_new_mon() needs to see the old value of cur_mon, so don't clear it in __close_session() - all calls to __close_session() but one are followed by __open_session() anyway. __open_session() is only called when a new session needs to be established, so the "already open?" branch, which is now in the way, is simply dropped. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: revamp subs code, switch to SUBSCRIBE2 protocolIlya Dryomov
It is currently hard-coded in the mon_client that mdsmap and monmap subs are continuous, while osdmap sub is always "onetime". To better handle full clusters/pools in the osd_client, we need to be able to issue continuous osdmap subs. Revamp subs code to allow us to specify for each sub whether it should be continuous or not. Although not strictly required for the above, switch to SUBSCRIBE2 protocol while at it, eliminating the ambiguity between a request for "every map since X" and a request for "just the latest" when we don't have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now required - it's been supported since pre-argonaut (2010). Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling in before we validate the epoch and successfully install the new map can mess up mon_client sub state. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: decouple hunting and subs managementIlya Dryomov
Coupling hunting state with subscribe state is not a good idea. Clear hunting when we complete the authentication handshake. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: move debugfs initialization into __ceph_open_session()Ilya Dryomov
Our debugfs dir name is a concatenation of cluster fsid and client unique ID ("global_id"). It used to be the case that we learned global_id first, nowadays we always learn fsid first - the monmap is sent before any auth replies are. ceph_debugfs_client_init() call in ceph_monc_handle_map() is therefore never executed and can be removed. Its counterpart in handle_auth_reply() doesn't really belong there either: having to do monc->client and unlocking early to work around lockdep is a testament to that. Move it into __ceph_open_session(), where it can be called unconditionally. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-01-21libceph: remove outdated commentIlya Dryomov
MClientMount{,Ack} are long gone. The receipt of bare monmap doesn't actually indicate a mount success as we are yet to authenticate at that point in time. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-09-08libceph: use keepalive2 to verify the mon session is aliveYan, Zheng
Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-06-25libceph: a couple tweaks for wait loopsIlya Dryomov
- return -ETIMEDOUT instead of -EIO in case of timeout - wait_event_interruptible_timeout() returns time left until timeout and since it can be almost LONG_MAX we had better assign it to long Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-06-25libceph: store timeouts in jiffies, verify user inputIlya Dryomov
There are currently three libceph-level timeouts that the user can specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of these are in seconds and no checking is done on user input: negative values are accepted, we multiply them all by HZ which may or may not overflow, arbitrarily large jiffies then get added together, etc. There is also a bug in the way mount_timeout=0 is handled. It's supposed to mean "infinite timeout", but that's not how wait.h APIs treat it and so __ceph_open_session() for example will busy loop without much chance of being interrupted if none of ceph-mons are there. Fix all this by verifying user input, storing timeouts capped by msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies() helper for all user-specified waits to handle infinite timeouts correctly. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-02-19libceph: use mon_client.c/put_generic_request() moreIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2015-02-19libceph: nuke pool op infrastructureIlya Dryomov
On Mon, Dec 22, 2014 at 5:35 PM, Sage Weil <sage@newdream.net> wrote: > On Mon, 22 Dec 2014, Ilya Dryomov wrote: >> Actually, pool op stuff has been unused for over two years - looks like >> it was added for rbd create_snap and that got ripped out in 2012. It's >> unlikely we'd ever need to manage pools or snaps from the kernel client >> so I think it makes sense to nuke it. Sage? > > Yep! Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2015-01-08libceph: fix sparse endianness warningsIlya Dryomov
The only real issue is the one in auth_x.c and it came with 3.19-rc1 merge. Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-14libceph: Convert pr_warning to pr_warnJoe Perches
Use the more common pr_warn. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-09-10libceph: gracefully handle large reply messages from the monSage Weil
We preallocate a few of the message types we get back from the mon. If we get a larger message than we are expecting, fall back to trying to allocate a new one instead of blindly using the one we have. CC: stable@vger.kernel.org Signed-off-by: Sage Weil <sage@redhat.com> Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-06-06libceph: add ceph_monc_wait_osdmap()Ilya Dryomov
Add ceph_monc_wait_osdmap(), which will block until the osdmap with the specified epoch is received or timeout occurs. Export both of these as they are going to be needed by rbd. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-06-06libceph: mon_get_version request infrastructureIlya Dryomov
Add support for mon_get_version requests to libceph. This reuses much of the ceph_mon_generic_request infrastructure, with one exception. Older OSDs don't set mon_get_version reply hdr->tid even if the original request had a non-zero tid, which makes it impossible to lookup ceph_mon_generic_request contexts by tid in get_generic_reply() for such replies. As a workaround, we allocate a reply message on the reply path. This can probably interfere with revoke, but I don't see a better way. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-14libceph: rename ceph_msg::front_max to front_alloc_lenIlya Dryomov
Rename front_max field of struct ceph_msg to front_alloc_len to make its purpose more clear. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01libceph: wrap auth ops in wrapper functionsSage Weil
Use wrapper functions that check whether the auth op exists so that callers do not need a bunch of conditional checks. Simplifies the external interface. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-25libceph: eliminate sparse warningsAlex Elder
Eliminate most of the problems in the libceph code that cause sparse to issue warnings. - Convert functions that are never referenced externally to have static scope. - Pass NULL rather than 0 for a pointer argument in one spot in ceph_monc_delete_snapid() This partially resolves: http://tracker.ceph.com/issues/4184 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01libceph: Fix sparse warningIulius Curt
Make ceph_monc_do_poolop() static to remove the following sparse warning: * net/ceph/mon_client.c:616:5: warning: symbol 'ceph_monc_do_poolop' was not declared. Should it be static? Also drops the 'ceph_monc_' prefix, now being a private function. Signed-off-by: Iulius Curt <icurt@ixiacom.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-10-01libceph: remove unused monc->have_fsidSage Weil
This is unused; use monc->client->have_fsid. Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-20libceph: delay debugfs initialization until we learn global_idSage Weil
The debugfs directory includes the cluster fsid and our unique global_id. We need to delay the initialization of the debug entry until we have learned both the fsid and our global_id from the monitor or else the second client can't create its debugfs entry and will fail (and multiple client instances aren't properly reflected in debugfs). Reported by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30libceph: revoke mon_client messages on session restartSage Weil
Revoke all mon_client messages when we shut down the old connection. This is mostly moot since we are re-using the same ceph_connection, but it is cleaner. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-05libceph: initialize mon_client con only onceSage Weil
Do not re-initialize the con on every connection attempt. When we ceph_con_close, there may still be work queued on the socket (e.g., to close it), and re-initializing will clobber the work_struct state. Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-05libceph: set peer name on con_open, not initSage Weil
The peer name may change on each open attempt, even when the connection is reused. Signed-off-by: Sage Weil <sage@inktank.com>
2012-06-15Merge tag 'v3.5-rc1'Sage Weil
Linux 3.5-rc1 Conflicts: net/ceph/messenger.c
2012-06-15libceph: flush msgr queue during mon_client shutdownSage Weil
We need to flush the msgr workqueue during mon_client shutdown to ensure that any work affecting our embedded ceph_connection is finished so that we can be safely destroyed. Previously, we were flushing the work queue after osd_client shutdown and before mon_client shutdown to ensure that any osd connection refs to authorizers are flushed. Remove the redundant flush, and document in the comment that the mon_client flush is needed to cover that case as well. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06libceph: make ceph_con_revoke() a msg operationAlex Elder
ceph_con_revoke() is passed both a message and a ceph connection. Now that any message associated with a connection holds a pointer to that connection, there's no need to provide the connection when revoking a message. This has the added benefit of precluding the possibility of the providing the wrong connection pointer. If the message's connection pointer is null, it is not being tracked by any connection, so revoking it is a no-op. This is supported as a convenience for upper layers, so they can revoke a message that is not actually "in flight." Rename the function ceph_msg_revoke() to reflect that it is really an operation on a message, not a connection. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06libceph: tweak ceph_alloc_msg()Alex Elder
The function ceph_alloc_msg() is only used to allocate a message that will be assigned to a connection's in_msg pointer. Rename the function so this implied usage is more clear. In addition, make that assignment inside the function (again, since that's precisely what it's intended to be used for). This allows us to return what is now provided via the passed-in address of a "skip" variable. The return type is now Boolean to be explicit that there are only two possible outcomes. Make sure the result of an ->alloc_msg method call always sets the value of *skip properly. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06libceph: fully initialize connection in con_init()Alex Elder
Move the initialization of a ceph connection's private pointer, operations vector pointer, and peer name information into ceph_con_init(). Rearrange the arguments so the connection pointer is first. Hide the byte-swapping of the peer entity number inside ceph_con_init() Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06libceph: init monitor connection when openingAlex Elder
Hold off initializing a monitor client's connection until just before it gets opened for use. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>