summaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends
AgeCommit message (Collapse)Author
2017-11-30media: dvb-frontends: complete kernel-doc markupsMauro Carvalho Chehab
For the dvb-frontends that are now part of the documentation, complete the kernel-doc markups, in order for them to be properly used at the driver's kAPI documentation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30media: dvb_frontends: fix kernel-doc macrosMauro Carvalho Chehab
Now, the Kernel checks for kernel_doc format issues. Weird enough, it didn't get any of those troubles. Shssst! Well, let's fix it, as a preventive way to avoid having hundreds of new warnings on some next Linux version. Tested by adding all files under dvb-frontends that have "/**" on them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30media: drivers: remove "/**" from non-kernel-doc commentsMauro Carvalho Chehab
Several comments are wrongly tagged as kernel-doc, causing those warnings: drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq' drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp' drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand * on line 652 - I thought it was a doc line drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op' drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module. on line 301 - I thought it was a doc line drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id' drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface' drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration on line 432 - I thought it was a doc line drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen' drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv ' drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei ' drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame on line 150 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size on line 356 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size on line 369 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer on line 395 - I thought it was a doc line drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe' drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f' drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb ' drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; ' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency' drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv' drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv' drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt' drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30media: ix2505v: get rid of /** commentsMauro Carvalho Chehab
As warned: drivers/media/dvb-frontends/ix2505v.c:24: warning: cannot understand function prototype: 'int ix2505v_debug; ' drivers/media/dvb-frontends/ix2505v.c:59: warning: No description found for parameter 'state' drivers/media/dvb-frontends/ix2505v.c:128: warning: No description found for parameter 'fe' None of the comments there are kernel-doc. So, remove them with: perl -pi -e 's,\/\*\*,/*,g' drivers/media/dvb-frontends/ix2505v.c Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: drxj and drxk: don't produce kernel-doc warningsMauro Carvalho Chehab
Those drivers use a different notation for comments. While it is not worth converting to kernel-doc, removing it is also not an option. So, just replace /** by /* and be happy :-) Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-15Merge tag 'media/v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...
2017-11-07media: drxd: make const array fastIncrDecLUT staticColin Ian King
Don't populate array fastIncrDecLUT on the stack but instead make it static. Makes the object code smaller by over 360 bytes: text data bss dec hex filename 32680 944 64 33688 8398 drxd_hard.o text data bss dec hex filename 32223 1040 64 33327 822f drxd_hard.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-11media: dvb_frontend: get rid of get_property() callbackMauro Carvalho Chehab
Only lg2160 implement gets_property, but there's no need for that, as no other driver calls this callback, as get_frontend() does the same, and set_frontend() also calls lg2160 get_frontend(). So, get rid of it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11media: stv6110: get rid of a srate dead codeMauro Carvalho Chehab
The stv6110 has a weird code that checks if get_property and set_property ioctls are defined. If they're, it initializes a "srate" var from properties cache. Otherwise, it sets to 15MBaud, with won't make any sense. Thankfully, it seems that someone else discovered the issue in the past, as "srate" is currently not used anywhere! So, get rid of that really weird dead code logic. Reported-by: Honza Petrous <jpetrous@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11media: stv0288: get rid of set_property boilerplateMauro Carvalho Chehab
This driver doesn't implement support for set_property(). Yet, it implements a boilerplate for it. Get rid of it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23media: fix media Kconfig help syntax issuesHans Verkuil
The help text should be indented by at least two spaces after the 'help' separator. This is both good practice and the media_build system for building media drivers makes this assumption. I went through all Kconfigs under drivers/media and fixed any bad help sections. This makes it conform to the common practice and should fix problems with 'make menuconfig' when using media_build. This is due to a "WARNING" message that media_build can insert in the Kconfig and that assumes the help text is indented by at least two spaces. If not, then the Kconfig becomes invalid and 'make menuconfig' fails. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Thomas Kaiser <linux-dvb@kaiser-linux.li> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23media: lgdt3306a: Use ARRAY_SIZE macroThomas Meyer
Use ARRAY_SIZE macro, rather than explicitly coding some variant of it yourself. Found with: find -type f -name "*.c" -o -name "*.h" | xargs perl -p -i -e 's/\bsizeof\s*\(\s*(\w+)\s*\)\s*\ /\s*sizeof\s*\(\s*\1\s*\[\s*0\s*\]\s*\) /ARRAY_SIZE(\1)/g' and manual check/verification. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23media: dvb-frontends/mxl5xx: declare LIST_HEAD(mxllist) staticDaniel Scheller
Fixes one sparse warning: mxl5xx.c:46:1: warning: symbol 'mxllist' was not declared. Should it be static? Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23media: dvb-frontends: delete jump targetsMarkus Elfring
* Return directly after a call of the function "kzalloc" failed at the beginning. * Move a bit of exception handling code into an if branch. * Delete jump targets which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23media: drivers: Adjust checks for null pointersMarkus Elfring
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23media: drivers: improve a size determinationMarkus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. [mchehab@s-opensoure.com: merge similar patches into one] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23media: drivers: delete unnecessary variable initialisationsMarkus Elfring
The variables will be set to an appropriate value before usage. Thus omit the explicit initialisation at the beginning. [mchehab@s-opensource.com: fold similar patches into one] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23media: drivers: delete error messages for failed memory allocationMarkus Elfring
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: fold several similar patches into one] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23media: dvb: i2c transfers over usb cannot be done from stackSean Young
Since commit 29d2fef8be11 ("usb: catch attempts to submit urbs with a vmalloc'd transfer buffer"), the AverMedia AverTV DVB-T USB 2.0 (a800) fails to probe. Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: mn88473: reset stream ID reg if no PLP givenOlli Salonen
If the PLP given is NO_STREAM_ID_FILTER (~0u) don't try to set that into the PLP register. Set PLP to 0 instead. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: mn88472: reset stream ID reg if no PLP givenOlli Salonen
If the PLP given is NO_STREAM_ID_FILTER (~0u) don't try to set that into the PLP register. Set PLP to 0 instead. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib8000: remove some bogus dead codeDan Carpenter
This function is broken. It sets the wrong front_end to NULL. But it's not used, so let's just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib9000: delete some unused broken codeDan Carpenter
The dib9000_remove_slave_frontend() function isn't used. I was reviewing it because my static checker claims it writes one element beyond the end of the array. That's a false positive. What it actually does is, if there are two or more front ends, then it prints a debug message to say that it removed the first one, stored in state->fe[1], and then it "removes" (scare quotes on purpose) the second one, stored in state->fe[2]. Deleting a front end from the middle is not really supported and breaks code like dib9000_release() which assumes the first NULL front end marks the end of the list. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib0090: fix duplicated code for different branchesGustavo A. R. Silva
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Addresses-Coverity-ID: 1226795 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-frontends/stv0367: remove QAM_AUTO from ddb_fe_opsDaniel Scheller
Since the cab_* codepath doesn't recognize QAM_AUTO, don't announce that it is supported when it really isn't. Fixes ie. w_scan from unconditionally using QAM_AUTO on DVB-C scans. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-frontends/stv0910: change minsymrate to 100Ksyms/sDaniel Scheller
The demodulator supports symbol rates as low as 100Ksyms/s - the demod setup in start() already handles such low symbol rates and reviewers of stv0910 equipped cards even found and tested transponders with SRs in that range. So, announce this in the fe_ops. Cc: Ralph Metzler <rjkm@metzlerbros.de> Cc: Richard Scobie <r.scobie@clear.net.nz> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-frontends/stv0910: release lock on gate_ctrl() failureDaniel Scheller
Whenever write_reg() fails to open/close the demod's I2C gate, release the lock to avoid deadlocking situations. If I2c gate open failed, there's no need to hold a lock, and if close fails, the mutex_unlock() at the end of the function is never reached, leaving the mutex_lock in locked state, which in turn will cause potential for deadlocks. Thus, release the lock on failure. While we're touching gate_ctrl(), add some explanation about the need for locking and the shared I2C bus/gate. Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: isl6421: add checks for current overflowJemma Denson
This Kaffeine's BZ: https://bugs.kde.org/show_bug.cgi?id=374693 affects SkyStar S2 PCI DVB-S/S2 rev 3.3 device. It could be due to a Kernel bug. While checking the Isil 6421, comparing with its manual, available at: http://www.intersil.com/content/dam/Intersil/documents/isl6/isl6421a.pdf It was noticed that, if the output load is highly capacitive, a different approach is recomended when energizing the LNBf. Also, it is possible to detect if a current overload is happening, by checking an special flag. Add support for it. Tested on Skystar S2. Changes respect override_or option so should still work fine on cx88 based cards which disable dynamic current limit. Changes since v1: v2 - fixed incorrect checking of i2c return values v3 - fix if logic to check if dcl needs re-enabling - respect override_or values which aim to disable dcl - only do long sleep on overload if dcl enabled - add short sleep before re-enabling dcl - only check overload and potentially return EINVAL if device is on v4 - revert v3 sleep logic changes to remove tuning delays Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jemma Denson <jdenson@gmail.com>
2017-08-20media: stv6111: return NULL instead of plain integerDaniel Scheller
Fixes: stv6111.c:665:24: warning: Using plain integer as NULL pointer Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: stv0910: declare global list_head stvlist staticDaniel Scheller
Cleans up smatch warning: symbol 'stvlist' was not declared. Should it be static? Patch originally submitted by Colin Ian King <colin.king@canonical.com>, remainder after the merge of all other stv0910 fixes. Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/cxd2841er: update moddesc wrt new chip supportDaniel Scheller
Since the driver now recognizes and supports more chip variants, reflect this fact in the module description accordingly. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv0910: fix mask for scramblingcode setupDaniel Scheller
The scrambling code has 4 bits. Fix the mask accordingly. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv0910: fix FE_HAS_LOCK check order in tune()Daniel Scheller
It should first read the status and then check if FE has lock. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends: MaxLinear MxL5xx DVB-S/S2 tuner-demodulator driverDaniel Scheller
This adds the frontend driver for the MaxLinear MxL5xx family of tuner- demodulators, as used on Digital Devices MaxS4/8 four/eight-tuner cards. The driver was picked from the dddvb vendor driver package and - judging solely from the diff - has undergone a 100% rework: - Silly #define's used to pass multiple values to functions were expanded. This resulted in macro/register names not being usable anymore for such occurences, but makes the code WAY more read-, understand- and maintainable. - CamelCase was changed to kernel_case - All typedef were removed - Overall code style was fixed, besides >80char lines in _defs.h and _regs.h, checkpatch is happy. - Also, signal stat acquisition was made to comply with the DVB API ways to do these things. Permission to reuse and mainline the driver code was formally granted by Ralph Metzler <rjkm@metzlerbros.de>. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv{0910,6111}: constify tablesDaniel Scheller
Mark lookup tables and fe_ops things const so the compiler can put them into .rodata. While at it, improve name and identifier strings (moddesc, fe_ops). Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv6111: cosmetics: comments fixup, miscDaniel Scheller
Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv6111: coding style cleanupDaniel Scheller
Fix up all remainders reported by checkpatch-strict. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv0910: cosmetics: fixup comments, miscDaniel Scheller
Fix up block comment style, whitespaces, c++ style comments et al. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv0910: further coding style cleanupDaniel Scheller
Fixes up all remainders reported by "checkpatch.pl --strict" Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv0910: implement diseqc_send_burstDaniel Scheller
This implements the diseqc_send_burst frontend op to support sending mini-DISEQC bursts. Picked up from dddvb's driver package where this specific block was disabled via #if 0/#endif, but is still working according to feedback from upstream, so add it. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: dvb-frontends/stv0910: fix STR assignment, remove unneeded varDaniel Scheller
According to the documentation, FE_SCALE_DECIBEL values should be assigned to .svalue and not .uvalue, so let's do this. While at it, remove the unneeded strength var from read_signal_strength(). Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: dvb-frontends: mb86a16: remove useless variables in signal_det()Gustavo A. R. Silva
Remove useless variables wait_t and wait_sym and code related. Also, fix some coding style issues. Addresses-Coverity-ID: 1226947 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: dvb-frontends/stv0367: improve QAM fe_statusDaniel Scheller
While cab_state->state gives a quite accurate indication of the demod signal status, it might be incorrect if cab_algo() wasn't able to determine the exact status, with cab_algo() being the only place where this status was updated from, and it is only called upon tuning to new parameters passed to set_frontend(). Thus, the status will be wrong until the demod is retuned. With the cab_signal_type parsing in read_status(), this results in unusual fe_states like FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK, which, while userspace applications check for FE_HAS_LOCK and work fine, leads to missing CNR or UCB stats. Fix this by re-reading CAB_FSM_STATUS and updating cab_state->state() in read_status(). While at it, refactor the fsm/qamfeclock and the fsm->signaltype parsing into separate functions to make things cleaner and deduplicate code. Also, assume full QAM FEC lock equals full FE_STATUS. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: dib0090: make const array dib0090_tuning_table_cband_7090e_aci staticColin Ian King
Don't populate array dib0090_tuning_table_cband_7090e_aci on the stack but instead make it static. Makes the object code smaller by over 180 bytes: Before: text data bss dec hex filename 40052 7320 192 47564 b9cc dib0090.o After: text data bss dec hex filename 39780 7408 192 47380 b914 dib0090.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: drxj: make several const arrays staticColin Ian King
Don't populate const arrays on the stack but instead make them static. Makes the object code smaller by over 1800 bytes: Before: text data bss dec hex filename 94100 9160 0 103260 1935c drxj.o After: text data bss dec hex filename 91044 10400 0 101444 18c44 drxj.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: drxd: make const arrays slowIncrDecLUT and fastIncrDecLUT staticColin Ian King
Don't populate arrays slowIncrDecLUT and fastIncrDecLUT on the stack but instead make them static. Makes the object code smaller by over 100 bytes: text data bss dec hex filename 27776 832 64 28672 7000 drxd_hard.o text data bss dec hex filename 27530 976 64 28570 6f9a drxd_hard.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: dvb-frontends/cxd2841er: do sleep on delivery system changeDaniel Scheller
Discovered using w_scan when scanning DVB-T/T2: When w_scan goes from -T to -T2, it does so without stopping the frontend using .sleep. Due to this, the demod operation mode isn't re-setup, but as it still is in STATE_ACTIVE_TC, PLP and T2 Profile are set up, but only retune_active() is called, leaving the demod in T mode, thus not operable on any T2 frequency. Fix this by putting the demod to sleep if priv->system isn't equal to p->delsys. To properly accomplish this, sleep_tc() is split into sleep_tc() and shutdown_tc(), where sleep_tc() will only perform the sleep operation, while shutdown_tc() additionally performs the full demod shutdown (to keep the behaviour when the .sleep FE_OP is called). Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: dvb-frontends/cxd2841er: make several arrays staticColin Ian King
Don't populate arrays on the stack but make them static. Makes the object code smaller: Before: text data bss dec hex filename 89299 21704 64 111067 1b1db cxd2841er.o After: text data bss dec hex filename 85823 23432 64 109319 1ab07 cxd2841er.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: cx24123: constify i2c_algorithm structureGustavo A. R. Silva
Check for i2c_algorithm structures that are only stored in the algo field of an i2c_adapter structure. This field is declared const, so i2c_algorithm structures that have this property can be declared as const also. This issue was identified using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct i2c_algorithm i@p = { ... }; @ok@ identifier r.i; struct i2c_adapter e; position p; @@ e.algo = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct i2c_algorithm i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>