summaryrefslogtreecommitdiff
path: root/drivers/ata/libata-eh.c
AgeCommit message (Collapse)Author
2017-11-15Merge branch 'for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting or alarming. Other than a new power saving mode addition to ahci and crash fix on a tracepoint, all changes are trivial or device-specific" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode. ata: sata_dwc_460ex: Propagate platform device ID to DMA driver ata: fixes kernel crash while tracing ata_eh_link_autopsy event ata: pata_pdc2027x: Fix space before '[' error. libata: fix spelling mistake: 'ambigious' -> 'ambiguous' ata: ceva: Add SMMU support for SATA IP ata: ceva: Correct the suspend and resume logic for SATA ata: ceva: Correct the AXI bus configuration for SATA ports ata: ceva: Add CCI support for SATA if CCI is enabled ata: ceva: Make RxWaterMark value as module parameter ata: ceva: Disable Device Sleep capability ata: ceva: Add gen 3 mode support in driver ata: ceva: Move sata port phy oob settings to device-tree devicetree: bindings: Add sata port phy config parameters in ahci-ceva ata: mark expected switch fall-throughs ata: sata_mv: remove a redundant assignment to pointer ehi ahci: Add support for Cavium's fifth generation SATA controller ata: sata_rcar: Use of_device_get_match_data() helper libata: make ata_port_type const libata: make static arrays const, reduces object code size ...
2017-11-03ata: fixes kernel crash while tracing ata_eh_link_autopsy eventRameshwar Prasad Sahu
When tracing ata link error event, the kernel crashes when the disk is removed due to NULL pointer access by trace_ata_eh_link_autopsy API. This occurs as the dev is NULL when the disk disappeared. This patch fixes this crash by calling trace_ata_eh_link_autopsy only if "dev" is not NULL. v2 changes: Removed direct passing "link" pointer instead of "dev" in trace API. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 255c03d15a29 ("libata: Add tracepoints") Cc: stable@vger.kernel.org # v4.1+
2017-10-23ata: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. In cases where a "drop through" comment was already in place, I replaced it with a proper "fall through" comment, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-10-17libata: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org Link: https://lkml.kernel.org/r/20171005004842.GA23011@beast
2017-09-18libata: Add new med_power_with_dipm link_power_management_policy settingHans de Goede
As described by Matthew Garret quite a while back: https://mjg59.dreamwidth.org/34868.html Intel CPUs starting with the Haswell generation need SATA links to power down for the "package" part of the CPU to reach low power-states like PC7 / P8 which bring a significant power-saving with them. The default max_performance lpm policy does not allow for these high PC states, both the medium_power and min_power policies do allow this. The min_power policy saves significantly more power, but there are some reports of some disks / SSDs not liking min_power leading to system crashes and in some cases even data corruption has been reported. Matthew has found a document documenting the default settings of Intel's IRST Windows driver with which most laptops ship: https://www-ssl.intel.com/content/dam/doc/reference-guide/sata-devices-implementation-recommendations.pdf Matthew wrote a patch changing med_power to match those defaults, but that never got anywhere as some people where reporting issues with the patch-set that patch was a part of. This commit is another attempt to make the default IRST driver settings available under Linux, but instead of changing medium_power and potentially introducing regressions, this commit adds a new med_power_with_dipm setting which is identical to the existing medium_power accept that it enables dipm on top, which makes it match the Windows IRST driver settings, which should hopefully be safe to use on most devices. The med_power_with_dipm setting is close to min_power, except that: a) It does not use host-initiated slumber mode (ASP not set), but it does allow device-initiated slumber b) It does not enable DevSlp mode On my T440s test laptop I get the following power savings when idle: medium_power 0.9W med_power_with_dipm 1.2W min_power 1.2W Suggested-by: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-08-21Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Removal of spin_unlock_wait() - SRCU updates - Torture-test updates - Documentation updates - Miscellaneous fixes - CPU-hotplug fixes - Miscellaneous non-RCU fixes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-17drivers/ata: Replace spin_unlock_wait() with lock/unlock pairPaul E. McKenney
There is no agreed-upon definition of spin_unlock_wait()'s semantics, and it appears that all callers could do just as well with a lock/unlock pair. This commit therefore eliminates the spin_unlock_wait() call and associated else-clause and hoists the then-clause's lock and unlock out of the "if" statement. This should be safe from a performance perspective because according to Tejun there should be few if any drivers that don't set their own error handler. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <linux-ide@vger.kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-31libata: fix a couple of doc build warningsJonathan Corbet
The kerneldoc comments for a couple of functions in drivers/ata/libata-eh.c had fallen behind the current implementation, resulting in these doc build warnings: ./drivers/ata/libata-eh.c:1449: warning: No description found for parameter 'link' ./drivers/ata/libata-eh.c:1449: warning: Excess function parameter 'ap' description in 'ata_eh_done' ./drivers/ata/libata-eh.c:1590: warning: No description found for parameter 'qc' ./drivers/ata/libata-eh.c:1590: warning: Excess function parameter 'dev' description in 'ata_eh_request_sense' Update the comments and make the warnings go away. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-15libata: remove unused rc in ata_eh_handle_port_resumeKefeng Wang
Remove unused variable ‘rc’. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-05libata: move ata_read_log_page to libata-core.cChristoph Hellwig
It is core functionality, and only one of the users is in the EH code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-05-16ata: update references for libata documentationMauro Carvalho Chehab
The libata documentation is now using ReST. Update references to it to point to the new place. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-02-27scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-21Merge branch 'for-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Bartlomiej added pata_falcon - Christoph is trying to remove use of static 4k buf. It's still WIP - config cleanup around HAS_DMA - other fixes and driver-specific changes * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits) ata: pata_of_platform: using of_property_read_u32() helper pata_atiixp: Don't use unconnected secondary port on SB600/SB700 libata-sff: Don't scan disabled ports when checking for legacy mode. pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode() ahci: qoriq: added ls2088a platforms support ahci: qoriq: report error when ecc register address is missing in dts ahci: qoriq: added a condition to enable dma coherence Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf" ahci: imx: fix building without hwmon or thermal ata: add Atari Falcon PATA controller driver ata: pass queued command to ->sff_data_xfer method ata: allow subsystem to be used on m68k arch libata: switch to dynamic allocation instead of ata_scsi_rbuf libata: don't call ata_scsi_rbuf_fill for command without a response buffer libata: call ->scsi_done from ata_scsi_simulate libata: remove the done callback from ata_scsi_args libata: move struct ata_scsi_args to libata-scsi.c libata: avoid global response buffer in atapi_qc_complete libata-eh: Use switch() instead of sparse array for protocol strings ata: sata_mv: Convert to devm_ioremap_resource() ...
2017-02-06scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-09libata-eh: Use switch() instead of sparse array for protocol stringsGeert Uytterhoeven
Replace the sparse 256-pointer array for looking up protocol strings by a switch() statement to reduce kernel size. According to bloat-o-meter, this saves 910 bytes on m68k (32-bit), and 1892 bytes on arm64 (64-bit). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-26Merge branch 'for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "libata saw quite a bit of activities in this cycle: - SMR drive support still being worked on - bug fixes and improvements to misc SCSI command emulation - some low level driver updates" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits) libata-scsi: better style in ata_msense_*() AHCI: Clear GHC.IS to prevent unexpectly asserting INTx ata: sata_dwc_460ex: remove redundant dev_err call ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_* libata: remove ATA_PROT_FLAG_DATA libata: remove ata_is_nodata ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48} libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat libata-scsi: Fix ZBC management out command translation libata-scsi: Fix translation of REPORT ZONES command ata: Handle ATA NCQ NO-DATA commands correctly libata-eh: decode all taskfile protocols ata: fixup ATA_PROT_NODATA libsas: use ata_is_ncq() and ata_has_dma() accessors libata: use ata_is_ncq() accessors libata: return boolean values from ata_is_* libata-scsi: avoid repeated calculation of number of TRIM ranges libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control() libata-scsi: fix D_SENSE bit relection in control mode page ...
2016-07-15ata: Handle ATA NCQ NO-DATA commands correctlyHannes Reinecke
Add a new taskfile protocol ATA_PROT_NCQ_NODATA to handle ATA NCQ NO-DATA commands correctly. And fixup ata_scsi_zbc_out_xlat() to use it. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14libata-eh: decode all taskfile protocolsHannes Reinecke
Some taskfile protocol values where missing in ata_eh_link_report(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14ata: fixup ATA_PROT_NODATAHannes Reinecke
The taskfile protocol is a numeric value, and can not be ORed. Currently this is harmless as the protocol is always zeroed before, but if it ever has a non-zero value the ORing would create incorrect results. Signed-off-by: Hannes Reinecke <hare@suse.de> [hch: updated patch description] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-18Merge remote-tracking branch 'mkp-scsi/4.7/scsi-fixes' into fixesJames Bottomley
2016-06-08scsi: fix race between simultaneous decrements of ->host_failedWei Fang
sas_ata_strategy_handler() adds the works of the ata error handler to system_unbound_wq. This workqueue asynchronously runs work items, so the ata error handler will be performed concurrently on different CPUs. In this case, ->host_failed will be decreased simultaneously in scsi_eh_finish_cmd() on different CPUs, and become abnormal. It will lead to permanently inequality between ->host_failed and ->host_busy, and scsi error handler thread won't start running. IO errors after that won't be handled. Since all scmds must have been handled in the strategy handler, just remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after the strategy handler to fix this race. Fixes: 50824d6c5657 ("[SCSI] libsas: async ata-eh") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <fangwei1@huawei.com> Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-09libata: Implement ZBC OUT translationHannes Reinecke
ZAC drives implement a 'ZAC Management Out' command template, which maps onto the ZBC OUT command. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: implement ZBC IN translationHannes Reinecke
ZAC drives implement a 'ZAC Management In' command template, which maps onto the ZBC IN command. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: do not attempt to retrieve sense code twiceHannes Reinecke
Do not call ata_request_sense() if the sense code is already present. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04libata: Implement control mode page to select sense formatHannes Reinecke
Implement MODE SELECT for the control mode page to allow the OS to switch to descriptor sense. tj: Dropped s/sb/cmd->sense_buffer/ in ata_gen_ata_sense(). Added @dev description to ata_msense_ctl_mode(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04libata: evaluate SCSI sense codeHannes Reinecke
Whenever a sense code is set it would need to be evaluated to update the error mask. tj: Cosmetic formatting updates. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04libata-eh: Set 'information' field for autosenseHannes Reinecke
If NCQ autosense or the sense data reporting feature is enabled the LBA of the offending command should be stored in the sense data 'information' field. tj: s/(u64)-1/U64_MAX/ Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04libata: Implement support for sense data reportingHannes Reinecke
ACS-4 defines a sense data reporting feature set. This patch implements support for it. tj: Cosmetic formatting updates. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04libata: Implement NCQ autosenseHannes Reinecke
Some newer devices support NCQ autosense (cf ACS-4), so we should be using it to retrieve the sense code and speed up recovery. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-07libata-eh.c: Introduce new ata port flag for controller which lockup on read ↵Andreas Werner
log page Some controller lockup on a ata_read_log_page. Add new ata port flag ATA_FLAG_NO_LOG_PAGE which can used to blacklist a controller. If this flag is set, any attempt to read a log page returns an error without actually issuing the command. Signed-off-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-03Revert "libata: Implement NCQ autosense"Tejun Heo
This reverts commit 42b966fbf35da9c87f08d98f9b8978edf9e717cf. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
2015-08-03Revert "libata: Implement support for sense data reporting"Tejun Heo
This reverts commit fe7173c206de63fc28475ee6ae42ff95c05692de. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by later changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
2015-08-03Revert "libata-eh: Set 'information' field for autosense"Tejun Heo
This reverts commit a1524f226a02aa6edebd90ae0752e97cfd78b159. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
2015-06-25Merge branch 'for-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - a number of libata core changes to better support NCQ TRIM. - ahci now supports MSI-X in single IRQ mode to support a new controller which doesn't implement MSI or INTX. - ahci now supports edge-triggered IRQ mode to support a new controller which for some odd reason did edge-triggered IRQ. - the usual controller support additions and changes. * 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (27 commits) libata: Do not blacklist Micron M500DC ata: ahci_mvebu: add suspend/resume support ahci, msix: Fix build error for !PCI_MSI ahci: Add support for Cavium's ThunderX host controller ahci: Add generic MSI-X support for single interrupts to SATA PCI driver libata: finally use __initconst in ata_parse_force_one() drivers: ata: add support for Ceva sata host controller devicetree:bindings: add devicetree bindings for ceva ahci ahci: added support for Freescale AHCI sata ahci: Store irq number in struct ahci_host_priv ahci: Move interrupt enablement code to a separate function Doc: libata: Fix spelling typo found in libata.xml ata:sata_nv - Change 1 to true for bool type variable. ata: add Broadcom AHCI SATA3 driver for STB chips Documentation: devicetree: add Broadcom SATA binding libata: Fix regression when the NCQ Send and Receive log page is absent ata: hpt366: fix constant cast warning ata: ahci_xgene: potential NULL dereference in probe ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller. libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch. ...
2015-05-21libata: Fix regression when the NCQ Send and Receive log page is absentMartin K. Petersen
Commit 5d3abf8ff67f ("libata: Fall back to unqueued READ LOG EXT if the DMA variant fails") allowed us to fall back to the unqueued READ LOG variant if the queued version failed. However, if the device did not support the page at all we would end up looping due to a merge snafu. Ensure we only take the fallback path once. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-05libata: Fall back to unqueued READ LOG EXT if the DMA variant failsMartin K. Petersen
Some devices advertise support for the READ/WRITE LOG DMA EXT commands but fail when we try to issue them. This can lead to queued TRIM being unintentionally disabled since the relevant feature flag is located in a general purpose log page. Fall back to unqueued READ LOG EXT if the DMA variant fails while reading a log page. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-25libata: Ignore spurious PHY event on LPM policy changeGabriele Mazzotta
When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13 Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2015-03-27libata: Add tracepointsHannes Reinecke
Add some tracepoints for ata_qc_issue, ata_qc_complete, and ata_eh_link_autopsy. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27libata-eh: Set 'information' field for autosenseHannes Reinecke
If NCQ autosense or the sense data reporting feature is enabled the LBA of the offending command should be stored in the sense data 'information' field. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27libata: Implement support for sense data reportingHannes Reinecke
ACS-4 defines a sense data reporting feature set. This patch implements support for it. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27libata: Implement NCQ autosenseHannes Reinecke
Some newer devices support NCQ autosense (cf ACS-4), so we should be using it to retrieve the sense code and speed up recovery. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27libata: whitespace cleanup in ata_get_cmd_descript()Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27libata: use READ_LOG_DMA_EXTHannes Reinecke
If READ_LOG_DMA_EXT is supported we should try to use it for reading the log pages. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas, megaraid_sas, ses) plus an assortment of minor updates. There's also an update to ufs which adds new phy drivers and finally a new logging infrastructure for SCSI" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits) scsi_logging: return void for dev_printk() functions scsi: print single-character strings with seq_putc scsi: merge consecutive seq_puts calls scsi: replace seq_printf with seq_puts aha152x: replace seq_printf with seq_puts advansys: replace seq_printf with seq_puts scsi: remove SPRINTF macro sg: remove an unused variable hpsa: Use local workqueues instead of system workqueues hpsa: add in P840ar controller model name hpsa: add in gen9 controller model names hpsa: detect and report failures changing controller transport modes hpsa: shorten the wait for the CISS doorbell mode change ack hpsa: refactor duplicated scan completion code into a new routine hpsa: move SG descriptor set-up out of hpsa_scatter_gather() hpsa: do not use function pointers in fast path command submission hpsa: print CDBs instead of kernel virtual addresses for uncommon errors hpsa: do not use a void pointer for scsi_cmd field of struct CommandList hpsa: return failed from device reset/abort handlers hpsa: check for ctlr lockup after command allocation in main io path ...
2015-01-20libata: fixup oops in ata_eh_link_report()Hannes Reinecke
We should only try to evaluate the cdb if this is an ATAPI device, for any other device the 'cdb' field and the cdb_len has no meaning. Fixes: cbba5b0ee4c6c2fc8b78a21d0900099d480cf2e9 Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tejun Heo <tj@kernel.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09libata: use __scsi_format_command()Hannes Reinecke
libata already uses an internal buffer, so we should be using __scsi_format_command() here. Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-07libata: Remove FIXME comment in atapi_eh_request_senseNicholas Krause
Remove the FIXME comment in atapi_eh_request_sense () asking whether memset of sense buffer is necessary. The buffer may be partially or fully filled by the device. We want it to be cleared. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-05libata: export ata_get_cmd_descript()Andy Shevchenko
The driver sata_dwc_460ex is using this symbol. To build it as a module we have to have the symbol exported. This patch adds EXPORT_SYMBOL_GPL() macro for that. tj: Updated to use EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() as the only known user is an in-tree driver. Suggested by Sergei. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
2014-11-05libata: Implement ATA_DEV_ZACHannes Reinecke
Add new ATA device type for ZAC devices. Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-15libata: EH should handle AMNF error condition as a media errorAlexey Asemov
libata-eh.c should handle AMNF error condition (error byte bit 0, usually code 0x01) in libata-eh.c along with UNC as a media error so SCSI stack can handle it properly (translation code 0x01 is already present in libata-scsi.c) but was never passed down due to lack of handling in EH. While using linux-based machine (AMD 6550M-based notebook, PCI IDs for the controller are 1022:7801 subsys 1025:059d) and ddrescue to salvage data from failing hard drive (WD7500BPVT 2.5" 750G SATA2), I've found that pure AMNF 0x01 error code generates generic "device error" that is retried several times by SCSI stack instead of "media error" that is passed up to software. So we may assume deprecated AMNF error code is surely not dead yet, and it's better for it to be handled properly. As we may see it is used by modern enough devices, and used properly: drive returned AMNF only when IDs for track cannot be read completely due to dying head or positioning, otherwise it returned UNC(orrectables). Not handling it causes wrong generic error code ("device error") reporting down the stack, can damage failing drives further because of excessive retries, and slows salvaging down a lot. Also, there is handling code in libata-scsi.c for 0x01 AMNF error already. https://bugzilla.kernel.org/show_bug.cgi?id=80031 tj: Shortened $SUBJ and moved its content to the first paragraph. Signed-off-by: Alexey Asemov <alex@alex-at.ru> Signed-off-by: Tejun Heo <tj@kernel.org>