1 files changed, 404 insertions, 39 deletions

diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 749bb08c4772..56c5570aadbe 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -133,12 +133,6 @@ enum nand_ecc_algo {
  */
 #define NAND_ECC_GENERIC_ERASED_CHECK	BIT(0)
 #define NAND_ECC_MAXIMIZE		BIT(1)
-/*
- * If your controller already sends the required NAND commands when
- * reading or writing a page, then the framework is not supposed to
- * send READ0 and SEQIN/PAGEPROG respectively.
- */
-#define NAND_ECC_CUSTOM_PAGE_ACCESS	BIT(2)
 
 /* Bit mask for flags passed to do_nand_read_ecc */
 #define NAND_GET_DEVICE		0x80
@@ -191,11 +185,6 @@ enum nand_ecc_algo {
 /* Non chip related options */
 /* This option skips the bbt scan during initialization. */
 #define NAND_SKIP_BBTSCAN	0x00010000
-/*
- * This option is defined if the board driver allocates its own buffers
- * (e.g. because it needs them DMA-coherent).
- */
-#define NAND_OWN_BUFFERS	0x00020000
 /* Chip may not exist, so silence any errors in scan */
 #define NAND_SCAN_SILENT_NODEV	0x00040000
 /*
@@ -525,6 +514,8 @@ static const struct nand_ecc_caps __name = {			\
  * @postpad:	padding information for syndrome based ECC generators
  * @options:	ECC specific options (see NAND_ECC_XXX flags defined above)
  * @priv:	pointer to private ECC control data
+ * @calc_buf:	buffer for calculated ECC, size is oobsize.
+ * @code_buf:	buffer for ECC read from flash, size is oobsize.
  * @hwctl:	function to control hardware ECC generator. Must only
  *		be provided if an hardware ECC is available
  * @calculate:	function for ECC calculation or readback from ECC hardware
@@ -575,6 +566,8 @@ struct nand_ecc_ctrl {
 	int postpad;
 	unsigned int options;
 	void *priv;
+	u8 *calc_buf;
+	u8 *code_buf;
 	void (*hwctl)(struct mtd_info *mtd, int mode);
 	int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
 			uint8_t *ecc_code);
@@ -602,26 +595,6 @@ struct nand_ecc_ctrl {
 			int page);
 };
 
-static inline int nand_standard_page_accessors(struct nand_ecc_ctrl *ecc)
-{
-	return !(ecc->options & NAND_ECC_CUSTOM_PAGE_ACCESS);
-}
-
-/**
- * struct nand_buffers - buffer structure for read/write
- * @ecccalc:	buffer pointer for calculated ECC, size is oobsize.
- * @ecccode:	buffer pointer for ECC read from flash, size is oobsize.
- * @databuf:	buffer pointer for data, size is (page size + oobsize).
- *
- * Do not change the order of buffers. databuf and oobrbuf must be in
- * consecutive order.
- */
-struct nand_buffers {
-	uint8_t	*ecccalc;
-	uint8_t	*ecccode;
-	uint8_t *databuf;
-};
-
 /**
  * struct nand_sdr_timings - SDR NAND chip timings
  *
@@ -762,6 +735,350 @@ struct nand_manufacturer_ops {
 };
 
 /**
+ * struct nand_op_cmd_instr - Definition of a command instruction
+ * @opcode: the command to issue in one cycle
+ */
+struct nand_op_cmd_instr {
+	u8 opcode;
+};
+
+/**
+ * struct nand_op_addr_instr - Definition of an address instruction
+ * @naddrs: length of the @addrs array
+ * @addrs: array containing the address cycles to issue
+ */
+struct nand_op_addr_instr {
+	unsigned int naddrs;
+	const u8 *addrs;
+};
+
+/**
+ * struct nand_op_data_instr - Definition of a data instruction
+ * @len: number of data bytes to move
+ * @in: buffer to fill when reading from the NAND chip
+ * @out: buffer to read from when writing to the NAND chip
+ * @force_8bit: force 8-bit access
+ *
+ * Please note that "in" and "out" are inverted from the ONFI specification
+ * and are from the controller perspective, so a "in" is a read from the NAND
+ * chip while a "out" is a write to the NAND chip.
+ */
+struct nand_op_data_instr {
+	unsigned int len;
+	union {
+		void *in;
+		const void *out;
+	} buf;
+	bool force_8bit;
+};
+
+/**
+ * struct nand_op_waitrdy_instr - Definition of a wait ready instruction
+ * @timeout_ms: maximum delay while waiting for the ready/busy pin in ms
+ */
+struct nand_op_waitrdy_instr {
+	unsigned int timeout_ms;
+};
+
+/**
+ * enum nand_op_instr_type - Definition of all instruction types
+ * @NAND_OP_CMD_INSTR: command instruction
+ * @NAND_OP_ADDR_INSTR: address instruction
+ * @NAND_OP_DATA_IN_INSTR: data in instruction
+ * @NAND_OP_DATA_OUT_INSTR: data out instruction
+ * @NAND_OP_WAITRDY_INSTR: wait ready instruction
+ */
+enum nand_op_instr_type {
+	NAND_OP_CMD_INSTR,
+	NAND_OP_ADDR_INSTR,
+	NAND_OP_DATA_IN_INSTR,
+	NAND_OP_DATA_OUT_INSTR,
+	NAND_OP_WAITRDY_INSTR,
+};
+
+/**
+ * struct nand_op_instr - Instruction object
+ * @type: the instruction type
+ * @cmd/@addr/@data/@waitrdy: extra data associated to the instruction.
+ *                            You'll have to use the appropriate element
+ *                            depending on @type
+ * @delay_ns: delay the controller should apply after the instruction has been
+ *	      issued on the bus. Most modern controllers have internal timings
+ *	      control logic, and in this case, the controller driver can ignore
+ *	      this field.
+ */
+struct nand_op_instr {
+	enum nand_op_instr_type type;
+	union {
+		struct nand_op_cmd_instr cmd;
+		struct nand_op_addr_instr addr;
+		struct nand_op_data_instr data;
+		struct nand_op_waitrdy_instr waitrdy;
+	} ctx;
+	unsigned int delay_ns;
+};
+
+/*
+ * Special handling must be done for the WAITRDY timeout parameter as it usually
+ * is either tPROG (after a prog), tR (before a read), tRST (during a reset) or
+ * tBERS (during an erase) which all of them are u64 values that cannot be
+ * divided by usual kernel macros and must be handled with the special
+ * DIV_ROUND_UP_ULL() macro.
+ */
+#define __DIVIDE(dividend, divisor) ({					\
+	sizeof(dividend) == sizeof(u32) ?				\
+		DIV_ROUND_UP(dividend, divisor) :			\
+		DIV_ROUND_UP_ULL(dividend, divisor);			\
+		})
+#define PSEC_TO_NSEC(x) __DIVIDE(x, 1000)
+#define PSEC_TO_MSEC(x) __DIVIDE(x, 1000000000)
+
+#define NAND_OP_CMD(id, ns)						\
+	{								\
+		.type = NAND_OP_CMD_INSTR,				\
+		.ctx.cmd.opcode = id,					\
+		.delay_ns = ns,						\
+	}
+
+#define NAND_OP_ADDR(ncycles, cycles, ns)				\
+	{								\
+		.type = NAND_OP_ADDR_INSTR,				\
+		.ctx.addr = {						\
+			.naddrs = ncycles,				\
+			.addrs = cycles,				\
+		},							\
+		.delay_ns = ns,						\
+	}
+
+#define NAND_OP_DATA_IN(l, b, ns)					\
+	{								\
+		.type = NAND_OP_DATA_IN_INSTR,				\
+		.ctx.data = {						\
+			.len = l,					\
+			.buf.in = b,					\
+			.force_8bit = false,				\
+		},							\
+		.delay_ns = ns,						\
+	}
+
+#define NAND_OP_DATA_OUT(l, b, ns)					\
+	{								\
+		.type = NAND_OP_DATA_OUT_INSTR,				\
+		.ctx.data = {						\
+			.len = l,					\
+			.buf.out = b,					\
+			.force_8bit = false,				\
+		},							\
+		.delay_ns = ns,						\
+	}
+
+#define NAND_OP_8BIT_DATA_IN(l, b, ns)					\
+	{								\
+		.type = NAND_OP_DATA_IN_INSTR,				\
+		.ctx.data = {						\
+			.len = l,					\
+			.buf.in = b,					\
+			.force_8bit = true,				\
+		},							\
+		.delay_ns = ns,						\
+	}
+
+#define NAND_OP_8BIT_DATA_OUT(l, b, ns)					\
+	{								\
+		.type = NAND_OP_DATA_OUT_INSTR,				\
+		.ctx.data = {						\
+			.len = l,					\
+			.buf.out = b,					\
+			.force_8bit = true,				\
+		},							\
+		.delay_ns = ns,						\
+	}
+
+#define NAND_OP_WAIT_RDY(tout_ms, ns)					\
+	{								\
+		.type = NAND_OP_WAITRDY_INSTR,				\
+		.ctx.waitrdy.timeout_ms = tout_ms,			\
+		.delay_ns = ns,						\
+	}
+
+/**
+ * struct nand_subop - a sub operation
+ * @instrs: array of instructions
+ * @ninstrs: length of the @instrs array
+ * @first_instr_start_off: offset to start from for the first instruction
+ *			   of the sub-operation
+ * @last_instr_end_off: offset to end at (excluded) for the last instruction
+ *			of the sub-operation
+ *
+ * Both @first_instr_start_off and @last_instr_end_off only apply to data or
+ * address instructions.
+ *
+ * When an operation cannot be handled as is by the NAND controller, it will
+ * be split by the parser into sub-operations which will be passed to the
+ * controller driver.
+ */
+struct nand_subop {
+	const struct nand_op_instr *instrs;
+	unsigned int ninstrs;
+	unsigned int first_instr_start_off;
+	unsigned int last_instr_end_off;
+};
+
+int nand_subop_get_addr_start_off(const struct nand_subop *subop,
+				  unsigned int op_id);
+int nand_subop_get_num_addr_cyc(const struct nand_subop *subop,
+				unsigned int op_id);
+int nand_subop_get_data_start_off(const struct nand_subop *subop,
+				  unsigned int op_id);
+int nand_subop_get_data_len(const struct nand_subop *subop,
+			    unsigned int op_id);
+
+/**
+ * struct nand_op_parser_addr_constraints - Constraints for address instructions
+ * @maxcycles: maximum number of address cycles the controller can issue in a
+ *	       single step
+ */
+struct nand_op_parser_addr_constraints {
+	unsigned int maxcycles;
+};
+
+/**
+ * struct nand_op_parser_data_constraints - Constraints for data instructions
+ * @maxlen: maximum data length that the controller can handle in a single step
+ */
+struct nand_op_parser_data_constraints {
+	unsigned int maxlen;
+};
+
+/**
+ * struct nand_op_parser_pattern_elem - One element of a pattern
+ * @type: the instructuction type
+ * @optional: whether this element of the pattern is optional or mandatory
+ * @addr/@data: address or data constraint (number of cycles or data length)
+ */
+struct nand_op_parser_pattern_elem {
+	enum nand_op_instr_type type;
+	bool optional;
+	union {
+		struct nand_op_parser_addr_constraints addr;
+		struct nand_op_parser_data_constraints data;
+	} ctx;
+};
+
+#define NAND_OP_PARSER_PAT_CMD_ELEM(_opt)			\
+	{							\
+		.type = NAND_OP_CMD_INSTR,			\
+		.optional = _opt,				\
+	}
+
+#define NAND_OP_PARSER_PAT_ADDR_ELEM(_opt, _maxcycles)		\
+	{							\
+		.type = NAND_OP_ADDR_INSTR,			\
+		.optional = _opt,				\
+		.ctx.addr.maxcycles = _maxcycles,		\
+	}
+
+#define NAND_OP_PARSER_PAT_DATA_IN_ELEM(_opt, _maxlen)		\
+	{							\
+		.type = NAND_OP_DATA_IN_INSTR,			\
+		.optional = _opt,				\
+		.ctx.data.maxlen = _maxlen,			\
+	}
+
+#define NAND_OP_PARSER_PAT_DATA_OUT_ELEM(_opt, _maxlen)		\
+	{							\
+		.type = NAND_OP_DATA_OUT_INSTR,			\
+		.optional = _opt,				\
+		.ctx.data.maxlen = _maxlen,			\
+	}
+
+#define NAND_OP_PARSER_PAT_WAITRDY_ELEM(_opt)			\
+	{							\
+		.type = NAND_OP_WAITRDY_INSTR,			\
+		.optional = _opt,				\
+	}
+
+/**
+ * struct nand_op_parser_pattern - NAND sub-operation pattern descriptor
+ * @elems: array of pattern elements
+ * @nelems: number of pattern elements in @elems array
+ * @exec: the function that will issue a sub-operation
+ *
+ * A pattern is a list of elements, each element reprensenting one instruction
+ * with its constraints. The pattern itself is used by the core to match NAND
+ * chip operation with NAND controller operations.
+ * Once a match between a NAND controller operation pattern and a NAND chip
+ * operation (or a sub-set of a NAND operation) is found, the pattern ->exec()
+ * hook is called so that the controller driver can issue the operation on the
+ * bus.
+ *
+ * Controller drivers should declare as many patterns as they support and pass
+ * this list of patterns (created with the help of the following macro) to
+ * the nand_op_parser_exec_op() helper.
+ */
+struct nand_op_parser_pattern {
+	const struct nand_op_parser_pattern_elem *elems;
+	unsigned int nelems;
+	int (*exec)(struct nand_chip *chip, const struct nand_subop *subop);
+};
+
+#define NAND_OP_PARSER_PATTERN(_exec, ...)							\
+	{											\
+		.exec = _exec,									\
+		.elems = (struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ },		\
+		.nelems = sizeof((struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ }) /	\
+			  sizeof(struct nand_op_parser_pattern_elem),				\
+	}
+
+/**
+ * struct nand_op_parser - NAND controller operation parser descriptor
+ * @patterns: array of supported patterns
+ * @npatterns: length of the @patterns array
+ *
+ * The parser descriptor is just an array of supported patterns which will be
+ * iterated by nand_op_parser_exec_op() everytime it tries to execute an
+ * NAND operation (or tries to determine if a specific operation is supported).
+ *
+ * It is worth mentioning that patterns will be tested in their declaration
+ * order, and the first match will be taken, so it's important to order patterns
+ * appropriately so that simple/inefficient patterns are placed at the end of
+ * the list. Usually, this is where you put single instruction patterns.
+ */
+struct nand_op_parser {
+	const struct nand_op_parser_pattern *patterns;
+	unsigned int npatterns;
+};
+
+#define NAND_OP_PARSER(...)									\
+	{											\
+		.patterns = (struct nand_op_parser_pattern[]) { __VA_ARGS__ },			\
+		.npatterns = sizeof((struct nand_op_parser_pattern[]) { __VA_ARGS__ }) /	\
+			     sizeof(struct nand_op_parser_pattern),				\
+	}
+
+/**
+ * struct nand_operation - NAND operation descriptor
+ * @instrs: array of instructions to execute
+ * @ninstrs: length of the @instrs array
+ *
+ * The actual operation structure that will be passed to chip->exec_op().
+ */
+struct nand_operation {
+	const struct nand_op_instr *instrs;
+	unsigned int ninstrs;
+};
+
+#define NAND_OPERATION(_instrs)					\
+	{							\
+		.instrs = _instrs,				\
+		.ninstrs = ARRAY_SIZE(_instrs),			\
+	}
+
+int nand_op_parser_exec_op(struct nand_chip *chip,
+			   const struct nand_op_parser *parser,
+			   const struct nand_operation *op, bool check_only);
+
+/**
  * struct nand_chip - NAND Private Flash Chip Data
  * @mtd:		MTD device registered to the MTD framework
  * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
@@ -787,10 +1104,13 @@ struct nand_manufacturer_ops {
  *			commands to the chip.
  * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
  *			ready.
+ * @exec_op:		controller specific method to execute NAND operations.
+ *			This method replaces ->cmdfunc(),
+ *			->{read,write}_{buf,byte,word}(), ->dev_ready() and
+ *			->waifunc().
  * @setup_read_retry:	[FLASHSPECIFIC] flash (vendor) specific function for
  *			setting the read-retry mode. Mostly needed for MLC NAND.
  * @ecc:		[BOARDSPECIFIC] ECC control structure
- * @buffers:		buffer structure for read/write
  * @buf_align:		minimum buffer alignment required by a platform
  * @hwcontrol:		platform-specific hardware control structure
  * @erase:		[REPLACEABLE] erase function
@@ -830,6 +1150,7 @@ struct nand_manufacturer_ops {
  * @numchips:		[INTERN] number of physical chips
  * @chipsize:		[INTERN] the size of one chip for multichip arrays
  * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
+ * @data_buf:		[INTERN] buffer for data, size is (page size + oobsize).
  * @pagebuf:		[INTERN] holds the pagenumber which is currently in
  *			data_buf.
  * @pagebuf_bitflips:	[INTERN] holds the bitflip count for the page which is
@@ -886,6 +1207,9 @@ struct nand_chip {
 	void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
 			int page_addr);
 	int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+	int (*exec_op)(struct nand_chip *chip,
+		       const struct nand_operation *op,
+		       bool check_only);
 	int (*erase)(struct mtd_info *mtd, int page);
 	int (*scan_bbt)(struct mtd_info *mtd);
 	int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -896,7 +1220,6 @@ struct nand_chip {
 	int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
 				    const struct nand_data_interface *conf);
 
-
 	int chip_delay;
 	unsigned int options;
 	unsigned int bbt_options;
@@ -908,6 +1231,7 @@ struct nand_chip {
 	int numchips;
 	uint64_t chipsize;
 	int pagemask;
+	u8 *data_buf;
 	int pagebuf;
 	unsigned int pagebuf_bitflips;
 	int subpagesize;
@@ -928,7 +1252,7 @@ struct nand_chip {
 	u16 max_bb_per_die;
 	u32 blocks_per_die;
 
-	struct nand_data_interface *data_interface;
+	struct nand_data_interface data_interface;
 
 	int read_retries;
 
@@ -938,7 +1262,6 @@ struct nand_chip {
 	struct nand_hw_control *controller;
 
 	struct nand_ecc_ctrl ecc;
-	struct nand_buffers *buffers;
 	unsigned long buf_align;
 	struct nand_hw_control hwcontrol;
 
@@ -956,6 +1279,15 @@ struct nand_chip {
 	} manufacturer;
 };
 
+static inline int nand_exec_op(struct nand_chip *chip,
+			       const struct nand_operation *op)
+{
+	if (!chip->exec_op)
+		return -ENOTSUPP;
+
+	return chip->exec_op(chip, op, false);
+}
+
 extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
 extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
 
@@ -1225,8 +1557,7 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
 	return le16_to_cpu(chip->onfi_params.src_sync_timing_mode);
 }
 
-int onfi_init_data_interface(struct nand_chip *chip,
-			     struct nand_data_interface *iface,
+int onfi_fill_data_interface(struct nand_chip *chip,
 			     enum nand_data_interface_type type,
 			     int timing_mode);
 
@@ -1269,8 +1600,6 @@ static inline int jedec_feature(struct nand_chip *chip)
 
 /* get timing characteristics from ONFI timing mode. */
 const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
-/* get data interface from ONFI timing mode 0, used after reset. */
-const struct nand_data_interface *nand_get_default_data_interface(void);
 
 int nand_check_erased_ecc_chunk(void *data, int datalen,
 				void *ecc, int ecclen,
@@ -1316,9 +1645,45 @@ int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 /* Reset and initialize a NAND device */
 int nand_reset(struct nand_chip *chip, int chipnr);
 
+/* NAND operation helpers */
+int nand_reset_op(struct nand_chip *chip);
+int nand_readid_op(struct nand_chip *chip, u8 addr, void *buf,
+		   unsigned int len);
+int nand_status_op(struct nand_chip *chip, u8 *status);
+int nand_exit_status_op(struct nand_chip *chip);
+int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock);
+int nand_read_page_op(struct nand_chip *chip, unsigned int page,
+		      unsigned int offset_in_page, void *buf, unsigned int len);
+int nand_change_read_column_op(struct nand_chip *chip,
+			       unsigned int offset_in_page, void *buf,
+			       unsigned int len, bool force_8bit);
+int nand_read_oob_op(struct nand_chip *chip, unsigned int page,
+		     unsigned int offset_in_page, void *buf, unsigned int len);
+int nand_prog_page_begin_op(struct nand_chip *chip, unsigned int page,
+			    unsigned int offset_in_page, const void *buf,
+			    unsigned int len);
+int nand_prog_page_end_op(struct nand_chip *chip);
+int nand_prog_page_op(struct nand_chip *chip, unsigned int page,
+		      unsigned int offset_in_page, const void *buf,
+		      unsigned int len);
+int nand_change_write_column_op(struct nand_chip *chip,
+				unsigned int offset_in_page, const void *buf,
+				unsigned int len, bool force_8bit);
+int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len,
+		      bool force_8bit);
+int nand_write_data_op(struct nand_chip *chip, const void *buf,
+		       unsigned int len, bool force_8bit);
+
 /* Free resources held by the NAND device */
 void nand_cleanup(struct nand_chip *chip);
 
 /* Default extended ID decoding function */
 void nand_decode_ext_id(struct nand_chip *chip);
+
+/*
+ * External helper for controller drivers that have to implement the WAITRDY
+ * instruction and have no physical pin to check it.
+ */
+int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms);
+
 #endif /* __LINUX_MTD_RAWNAND_H */