summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CREDITS1
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio9
-rw-r--r--Documentation/devicetree/bindings/iio/accel/mma8452.txt4
-rw-r--r--Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt28
-rw-r--r--Documentation/devicetree/bindings/iio/adc/mcp3422.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt22
-rw-r--r--Documentation/devicetree/bindings/iio/health/max30100.txt8
-rw-r--r--Documentation/devicetree/bindings/iio/light/opt3001.txt26
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--MAINTAINERS6
-rw-r--r--drivers/iio/accel/Kconfig2
-rw-r--r--drivers/iio/accel/mma8452.c206
-rw-r--r--drivers/iio/accel/st_accel_core.c16
-rw-r--r--drivers/iio/adc/Kconfig16
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/at91-sama5d2_adc.c508
-rw-r--r--drivers/iio/adc/axp288_adc.c2
-rw-r--r--drivers/iio/adc/mcp320x.c31
-rw-r--r--drivers/iio/adc/mcp3422.c7
-rw-r--r--drivers/iio/chemical/Kconfig13
-rw-r--r--drivers/iio/chemical/Makefile1
-rw-r--r--drivers/iio/chemical/atlas-ph-sensor.c511
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c6
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.h8
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_trigger.c52
-rw-r--r--drivers/iio/dac/Kconfig14
-rw-r--r--drivers/iio/dac/Makefile1
-rw-r--r--drivers/iio/dac/ad5761.c430
-rw-r--r--drivers/iio/dac/mcp4725.c87
-rw-r--r--drivers/iio/gyro/st_gyro_core.c15
-rw-r--r--drivers/iio/health/max30100.c81
-rw-r--r--drivers/iio/humidity/Kconfig6
-rw-r--r--drivers/iio/humidity/dht11.c77
-rw-r--r--drivers/iio/humidity/si7005.c1
-rw-r--r--drivers/iio/humidity/si7020.c1
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c5
-rw-r--r--drivers/iio/industrialio-core.c1
-rw-r--r--drivers/iio/light/opt3001.c156
-rw-r--r--drivers/iio/magnetometer/ak8975.c4
-rw-r--r--drivers/iio/magnetometer/st_magn_core.c4
-rw-r--r--drivers/iio/pressure/Kconfig41
-rw-r--r--drivers/iio/pressure/Makefile2
-rw-r--r--drivers/iio/pressure/mpl115.c66
-rw-r--r--drivers/iio/pressure/mpl115.h24
-rw-r--r--drivers/iio/pressure/mpl115_i2c.c67
-rw-r--r--drivers/iio/pressure/mpl115_spi.c106
-rw-r--r--drivers/iio/pressure/st_pressure_core.c8
-rw-r--r--drivers/staging/iio/Documentation/sysfs-bus-iio-light28
-rw-r--r--drivers/staging/iio/adc/ad7192.c2
-rw-r--r--drivers/staging/iio/cdc/ad7150.c34
-rw-r--r--include/linux/iio/common/st_sensors.h4
-rw-r--r--include/linux/platform_data/ad5761.h44
-rw-r--r--include/uapi/linux/iio/types.h1
53 files changed, 2531 insertions, 265 deletions
diff --git a/CREDITS b/CREDITS
index a3887b59b9f9..4312cd076b5b 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3054,6 +3054,7 @@ D: PLX USB338x driver
D: PCA9634 driver
D: Option GTM671WFS
D: Fintek F81216A
+D: AD5761 iio driver
D: Various kernel hacks
S: Qtechnology A/S
S: Valby Langgade 142
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 0439c2aaf741..80c6fce9935b 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -497,7 +497,9 @@ Description:
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+ 125kohm_to_gnd: connected to ground via an 125kOhm resistor,
500kohm_to_gnd: connected to ground via a 500kOhm resistor,
+ 640kohm_to_gnd: connected to ground via a 640kOhm resistor,
three_state: left floating.
For a list of available output power down options read
outX_powerdown_mode_available. If Y is not present the
@@ -1491,3 +1493,10 @@ Description:
This ABI is especially applicable for humidity sensors
to heatup the device and get rid of any condensation
in some humidity environment
+
+What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw
+KernelVersion: 4.5
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled no offset etc.) pH reading of a substance as a negative
+ base-10 logarithm of hydrodium ions in a litre of water.
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
index 3c10e8581144..165937e1ac1c 100644
--- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -1,8 +1,10 @@
-Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
+Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC
+triaxial accelerometer
Required properties:
- compatible: should contain one of
+ * "fsl,mma8451"
* "fsl,mma8452"
* "fsl,mma8453"
* "fsl,mma8652"
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
new file mode 100644
index 000000000000..3223684a643b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -0,0 +1,28 @@
+* AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+Required properties:
+ - compatible: Should be "atmel,sama5d2-adc".
+ - reg: Should contain ADC registers location and length.
+ - interrupts: Should contain the IRQ line for the ADC.
+ - clocks: phandle to device clock.
+ - clock-names: Must be "adc_clk".
+ - vref-supply: Supply used as reference for conversions.
+ - vddana-supply: Supply for the adc device.
+ - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC.
+ - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC.
+ - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC.
+
+Example:
+
+adc: adc@fc030000 {
+ compatible = "atmel,sama5d2-adc";
+ reg = <0xfc030000 0x100>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&adc_clk>;
+ clock-names = "adc_clk";
+ atmel,min-sample-rate-hz = <200000>;
+ atmel,max-sample-rate-hz = <20000000>;
+ atmel,startup-time-ms = <4>;
+ vddana-supply = <&vdd_3v3_lp_reg>;
+ vref-supply = <&vdd_3v3_lp_reg>;
+}
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
index dcae4ccfcc52..82bcce07255d 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
@@ -6,6 +6,7 @@ Required properties:
"microchip,mcp3422" or
"microchip,mcp3423" or
"microchip,mcp3424" or
+ "microchip,mcp3425" or
"microchip,mcp3426" or
"microchip,mcp3427" or
"microchip,mcp3428"
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
new file mode 100644
index 000000000000..cffa1907463a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
@@ -0,0 +1,22 @@
+* Atlas Scientific pH-SM OEM sensor
+
+http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
+
+Required properties:
+
+ - compatible: must be "atlas,ph-sm"
+ - reg: the I2C address of the sensor
+ - interrupt-parent: should be the phandle for the interrupt controller
+ - interrupts: the sole interrupt generated by the device
+
+ Refer to interrupt-controller/interrupts.txt for generic interrupt client
+ node bindings.
+
+Example:
+
+atlas@65 {
+ compatible = "atlas,ph-sm";
+ reg = <0x65>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 2>;
+};
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
index f6fbac66ad06..295a9edfa4fd 100644
--- a/Documentation/devicetree/bindings/iio/health/max30100.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30100.txt
@@ -11,11 +11,19 @@ Required properties:
Refer to interrupt-controller/interrupts.txt for generic
interrupt client node bindings.
+Optional properties:
+ - maxim,led-current-microamp: configuration for LED current in microamperes
+ while the engine is running. First indexed value is the configuration for
+ the RED LED, and second value is for the IR LED.
+
+ Refer to the datasheet for the allowed current values.
+
Example:
max30100@057 {
compatible = "maxim,max30100";
reg = <57>;
+ maxim,led-current-microamp = <24000 50000>;
interrupt-parent = <&gpio1>;
interrupts = <16 2>;
};
diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
new file mode 100644
index 000000000000..eac30d508849
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
@@ -0,0 +1,26 @@
+* Texas Instruments OPT3001 Ambient Light Sensor
+
+The driver supports interrupt-driven and interrupt-less operation, depending
+on whether an interrupt property has been populated into the DT. Note that
+the optional generation of IIO events on rising/falling light threshold changes
+requires the use of interrupts. Without interrupts, only the simple reading
+of the current light value is supported through the IIO API.
+
+http://www.ti.com/product/opt3001
+
+Required properties:
+ - compatible: should be "ti,opt3001"
+ - reg: the I2C address of the sensor
+
+Optional properties:
+ - interrupt-parent: should be the phandle for the interrupt controller
+ - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
+
+Example:
+
+opt3001@44 {
+ compatible = "ti,opt3001";
+ reg = <0x44>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 72e2c5a2b327..44ddc980b085 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -28,6 +28,7 @@ arm ARM Ltd.
armadeus ARMadeus Systems SARL
artesyn Artesyn Embedded Technologies Inc.
asahi-kasei Asahi Kasei Corp.
+atlas Atlas Scientific LLC
atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
diff --git a/MAINTAINERS b/MAINTAINERS
index 79f7eb25ecd8..369f6aefc189 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1945,6 +1945,12 @@ M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/tty/serial/atmel_serial.c
+ATMEL SAMA5D2 ADC DRIVER
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+F: drivers/iio/adc/at91-sama5d2_adc.c
+
ATMEL Audio ALSA driver
M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index edc29b173f6c..d9feaa3c1fb8 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -143,7 +143,7 @@ config MMA8452
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the following Freescale 3-axis
- accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
+ accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
To compile this driver as a module, choose M here: the module
will be called mma8452.
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index ccc632a7cf01..7f4994f32a90 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1,6 +1,7 @@
/*
* mma8452.c - Support for following Freescale 3-axis accelerometers:
*
+ * MMA8451Q (14 bit)
* MMA8452Q (12 bit)
* MMA8453Q (10 bit)
* MMA8652FC (12 bit)
@@ -15,7 +16,7 @@
*
* 7-bit I2C slave address 0x1c/0x1d (pin selectable)
*
- * TODO: orientation / freefall events, autosleep
+ * TODO: orientation events, autosleep
*/
#include <linux/module.h>
@@ -85,8 +86,9 @@
#define MMA8452_INT_FF_MT BIT(2)
#define MMA8452_INT_TRANS BIT(5)
-#define MMA8452_DEVICE_ID 0x2a
-#define MMA8453_DEVICE_ID 0x3a
+#define MMA8451_DEVICE_ID 0x1a
+#define MMA8452_DEVICE_ID 0x2a
+#define MMA8453_DEVICE_ID 0x3a
#define MMA8652_DEVICE_ID 0x4a
#define MMA8653_DEVICE_ID 0x5a
@@ -416,6 +418,51 @@ fail:
return ret;
}
+/* returns >0 if in freefall mode, 0 if not or <0 if an error occured */
+static int mma8452_freefall_mode_enabled(struct mma8452_data *data)
+{
+ int val;
+ const struct mma_chip_info *chip = data->chip_info;
+
+ val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
+ if (val < 0)
+ return val;
+
+ return !(val & MMA8452_FF_MT_CFG_OAE);
+}
+
+static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state)
+{
+ int val;
+ const struct mma_chip_info *chip = data->chip_info;
+
+ if ((state && mma8452_freefall_mode_enabled(data)) ||
+ (!state && !(mma8452_freefall_mode_enabled(data))))
+ return 0;
+
+ val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
+ if (val < 0)
+ return val;
+
+ if (state) {
+ val |= BIT(idx_x + chip->ev_cfg_chan_shift);
+ val |= BIT(idx_y + chip->ev_cfg_chan_shift);
+ val |= BIT(idx_z + chip->ev_cfg_chan_shift);
+ val &= ~MMA8452_FF_MT_CFG_OAE;
+ } else {
+ val &= ~BIT(idx_x + chip->ev_cfg_chan_shift);
+ val &= ~BIT(idx_y + chip->ev_cfg_chan_shift);
+ val &= ~BIT(idx_z + chip->ev_cfg_chan_shift);
+ val |= MMA8452_FF_MT_CFG_OAE;
+ }
+
+ val = mma8452_change_config(data, chip->ev_cfg, val);
+ if (val)
+ return val;
+
+ return 0;
+}
+
static int mma8452_set_hp_filter_frequency(struct mma8452_data *data,
int val, int val2)
{
@@ -609,12 +656,22 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev,
const struct mma_chip_info *chip = data->chip_info;
int ret;
- ret = i2c_smbus_read_byte_data(data->client,
- data->chip_info->ev_cfg);
- if (ret < 0)
- return ret;
+ switch (dir) {
+ case IIO_EV_DIR_FALLING:
+ return mma8452_freefall_mode_enabled(data);
+ case IIO_EV_DIR_RISING:
+ if (mma8452_freefall_mode_enabled(data))
+ return 0;
+
+ ret = i2c_smbus_read_byte_data(data->client,
+ data->chip_info->ev_cfg);
+ if (ret < 0)
+ return ret;
- return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift));
+ return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift));
+ default:
+ return -EINVAL;
+ }
}
static int mma8452_write_event_config(struct iio_dev *indio_dev,
@@ -627,19 +684,35 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
const struct mma_chip_info *chip = data->chip_info;
int val;
- val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
- if (val < 0)
- return val;
+ switch (dir) {
+ case IIO_EV_DIR_FALLING:
+ return mma8452_set_freefall_mode(data, state);
+ case IIO_EV_DIR_RISING:
+ val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
+ if (val < 0)
+ return val;
+
+ if (state) {
+ if (mma8452_freefall_mode_enabled(data)) {
+ val &= ~BIT(idx_x + chip->ev_cfg_chan_shift);
+ val &= ~BIT(idx_y + chip->ev_cfg_chan_shift);
+ val &= ~BIT(idx_z + chip->ev_cfg_chan_shift);
+ val |= MMA8452_FF_MT_CFG_OAE;
+ }
+ val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift);
+ } else {
+ if (mma8452_freefall_mode_enabled(data))
+ return 0;
- if (state)
- val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift);
- else
- val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
+ val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
+ }
- val |= chip->ev_cfg_ele;
- val |= MMA8452_FF_MT_CFG_OAE;
+ val |= chip->ev_cfg_ele;
- return mma8452_change_config(data, chip->ev_cfg, val);
+ return mma8452_change_config(data, chip->ev_cfg, val);
+ default:
+ return -EINVAL;
+ }
}
static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
@@ -652,6 +725,16 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
if (src < 0)
return;
+ if (mma8452_freefall_mode_enabled(data)) {
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_AND_Y_AND_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_FALLING),
+ ts);
+ return;
+ }
+
if (src & data->chip_info->ev_src_xe)
iio_push_event(indio_dev,
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
@@ -745,6 +828,27 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev,
return 0;
}
+static const struct iio_event_spec mma8452_freefall_event[] = {
+ {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD) |
+ BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB)
+ },
+};
+
+static const struct iio_event_spec mma8652_freefall_event[] = {
+ {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD)
+ },
+};
+
static const struct iio_event_spec mma8452_transient_event[] = {
{
.type = IIO_EV_TYPE_MAG,
@@ -781,6 +885,24 @@ static struct attribute_group mma8452_event_attribute_group = {
.attrs = mma8452_event_attributes,
};
+#define MMA8452_FREEFALL_CHANNEL(modifier) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = modifier, \
+ .scan_index = -1, \
+ .event_spec = mma8452_freefall_event, \
+ .num_event_specs = ARRAY_SIZE(mma8452_freefall_event), \
+}
+
+#define MMA8652_FREEFALL_CHANNEL(modifier) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = modifier, \
+ .scan_index = -1, \
+ .event_spec = mma8652_freefall_event, \
+ .num_event_specs = ARRAY_SIZE(mma8652_freefall_event), \
+}
+
#define MMA8452_CHANNEL(axis, idx, bits) { \
.type = IIO_ACCEL, \
.modified = 1, \
@@ -822,11 +944,20 @@ static struct attribute_group mma8452_event_attribute_group = {
.num_event_specs = ARRAY_SIZE(mma8452_motion_event), \
}
+static const struct iio_chan_spec mma8451_channels[] = {
+ MMA8452_CHANNEL(X, idx_x, 14),
+ MMA8452_CHANNEL(Y, idx_y, 14),
+ MMA8452_CHANNEL(Z, idx_z, 14),
+ IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
+};
+
static const struct iio_chan_spec mma8452_channels[] = {
MMA8452_CHANNEL(X, idx_x, 12),
MMA8452_CHANNEL(Y, idx_y, 12),
MMA8452_CHANNEL(Z, idx_z, 12),
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
};
static const struct iio_chan_spec mma8453_channels[] = {
@@ -834,6 +965,7 @@ static const struct iio_chan_spec mma8453_channels[] = {
MMA8452_CHANNEL(Y, idx_y, 10),
MMA8452_CHANNEL(Z, idx_z, 10),
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
};
static const struct iio_chan_spec mma8652_channels[] = {
@@ -841,6 +973,7 @@ static const struct iio_chan_spec mma8652_channels[] = {
MMA8652_CHANNEL(Y, idx_y, 12),
MMA8652_CHANNEL(Z, idx_z, 12),
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
};
static const struct iio_chan_spec mma8653_channels[] = {
@@ -848,9 +981,11 @@ static const struct iio_chan_spec mma8653_channels[] = {
MMA8652_CHANNEL(Y, idx_y, 10),
MMA8652_CHANNEL(Z, idx_z, 10),
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+ MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
};
enum {
+ mma8451,
mma8452,
mma8453,
mma8652,
@@ -858,17 +993,34 @@ enum {
};
static const struct mma_chip_info mma_chip_info_table[] = {
- [mma8452] = {
- .chip_id = MMA8452_DEVICE_ID,
- .channels = mma8452_channels,
- .num_channels = ARRAY_SIZE(mma8452_channels),
+ [mma8451] = {
+ .chip_id = MMA8451_DEVICE_ID,
+ .channels = mma8451_channels,
+ .num_channels = ARRAY_SIZE(mma8451_channels),
/*
* Hardware has fullscale of -2G, -4G, -8G corresponding to
- * raw value -2048 for 12 bit or -512 for 10 bit.
+ * raw value -8192 for 14 bit, -2048 for 12 bit or -512 for 10
+ * bit.
* The userspace interface uses m/s^2 and we declare micro units
* So scale factor for 12 bit here is given by:
- * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
+ * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
*/
+ .mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} },
+ .ev_cfg = MMA8452_TRANSIENT_CFG,
+ .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
+ .ev_cfg_chan_shift = 1,
+ .ev_src = MMA8452_TRANSIENT_SRC,
+ .ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
+ .ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
+ .ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
+ .ev_ths = MMA8452_TRANSIENT_THS,
+ .ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
+ .ev_count = MMA8452_TRANSIENT_COUNT,
+ },
+ [mma8452] = {
+ .chip_id = MMA8452_DEVICE_ID,
+ .channels = mma8452_channels,
+ .num_channels = ARRAY_SIZE(mma8452_channels),
.mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} },
.ev_cfg = MMA8452_TRANSIENT_CFG,
.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
@@ -1049,6 +1201,7 @@ static int mma8452_reset(struct i2c_client *client)
}
static const struct of_device_id mma8452_dt_ids[] = {
+ { .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] },
{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
{ .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] },
@@ -1085,6 +1238,7 @@ static int mma8452_probe(struct i2c_client *client,
return ret;
switch (ret) {
+ case MMA8451_DEVICE_ID:
case MMA8452_DEVICE_ID:
case MMA8453_DEVICE_ID:
case MMA8652_DEVICE_ID:
@@ -1190,6 +1344,10 @@ static int mma8452_probe(struct i2c_client *client,
if (ret < 0)
goto buffer_cleanup;
+ ret = mma8452_set_freefall_mode(data, false);
+ if (ret)
+ return ret;
+
return 0;
buffer_cleanup:
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 70f042797f15..a03a1417dd63 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -67,6 +67,8 @@
#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10
#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08
+#define ST_ACCEL_1_IHL_IRQ_ADDR 0x25
+#define ST_ACCEL_1_IHL_IRQ_MASK 0x02
#define ST_ACCEL_1_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 2 */
@@ -92,6 +94,8 @@
#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02
#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10
+#define ST_ACCEL_2_IHL_IRQ_ADDR 0x22
+#define ST_ACCEL_2_IHL_IRQ_MASK 0x80
#define ST_ACCEL_2_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 3 */
@@ -125,6 +129,8 @@
#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80
#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00
+#define ST_ACCEL_3_IHL_IRQ_ADDR 0x23
+#define ST_ACCEL_3_IHL_IRQ_MASK 0x40
#define ST_ACCEL_3_IG1_EN_ADDR 0x23
#define ST_ACCEL_3_IG1_EN_MASK 0x08
#define ST_ACCEL_3_MULTIREAD_BIT false
@@ -169,6 +175,8 @@
#define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22
#define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04
#define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20
+#define ST_ACCEL_5_IHL_IRQ_ADDR 0x22
+#define ST_ACCEL_5_IHL_IRQ_MASK 0x80
#define ST_ACCEL_5_IG1_EN_ADDR 0x21
#define ST_ACCEL_5_IG1_EN_MASK 0x08
#define ST_ACCEL_5_MULTIREAD_BIT false
@@ -292,6 +300,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
+ .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
},
.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
.bootime = 2,
@@ -355,6 +365,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR,
+ .mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK,
},
.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
.bootime = 2,
@@ -430,6 +442,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR,
+ .mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK,
.ig1 = {
.en_addr = ST_ACCEL_3_IG1_EN_ADDR,
.en_mask = ST_ACCEL_3_IG1_EN_MASK,
@@ -537,6 +551,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr = ST_ACCEL_5_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR,
+ .mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK,
},
.multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
.bootime = 2, /* guess */
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 605ff42c4631..60673b40f2c3 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -131,6 +131,16 @@ config AT91_ADC
To compile this driver as a module, choose M here: the module will be
called at91_adc.
+config AT91_SAMA5D2_ADC
+ tristate "Atmel AT91 SAMA5D2 ADC"
+ depends on ARCH_AT91 || COMPILE_TEST
+ help
+ Say yes here to build support for Atmel SAMA5D2 ADC which is
+ available on SAMA5D2 SoC family.
+
+ To compile this driver as a module, choose M here: the module will be
+ called at91-sama5d2_adc.
+
config AXP288_ADC
tristate "X-Powers AXP288 ADC driver"
depends on MFD_AXP20X
@@ -265,11 +275,11 @@ config MCP320X
called mcp320x.
config MCP3422
- tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
+ tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver"
depends on I2C
help
- Say yes here to build support for Microchip Technology's
- MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
+ Say yes here to build support for Microchip Technology's MCP3421
+ MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428
analog to digital converters.
This driver can also be built as a module. If so, the module will be
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 6435780e9b71..fb57e12dbde2 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD799X) += ad799x.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
new file mode 100644
index 000000000000..dbee13ad33a3
--- /dev/null
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -0,0 +1,508 @@
+/*
+ * Atmel ADC driver for SAMA5D2 devices and compatible.
+ *
+ * Copyright (C) 2015 Atmel,
+ * 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/regulator/consumer.h>
+
+/* Control Register */
+#define AT91_SAMA5D2_CR 0x00
+/* Software Reset */
+#define AT91_SAMA5D2_CR_SWRST BIT(0)
+/* Start Conversion */
+#define AT91_SAMA5D2_CR_START BIT(1)
+/* Touchscreen Calibration */
+#define AT91_SAMA5D2_CR_TSCALIB BIT(2)
+/* Comparison Restart */
+#define AT91_SAMA5D2_CR_CMPRST BIT(4)
+
+/* Mode Register */
+#define AT91_SAMA5D2_MR 0x04
+/* Trigger Selection */
+#define AT91_SAMA5D2_MR_TRGSEL(v) ((v) << 1)
+/* ADTRG */
+#define AT91_SAMA5D2_MR_TRGSEL_TRIG0 0
+/* TIOA0 */
+#define AT91_SAMA5D2_MR_TRGSEL_TRIG1 1
+/* TIOA1 */
+#define AT91_SAMA5D2_MR_TRGSEL_TRIG2 2
+/* TIOA2 */
+#define AT91_SAMA5D2_MR_TRGSEL_TRIG3 3
+/* PWM event line 0 */
+#define AT91_SAMA5D2_MR_TRGSEL_TRIG4 4
+/* PWM event line 1 */
+#define AT91_SAMA5D2_MR_TRGSEL_TRIG5 5
+/* TIOA3 */
+#define AT91_SAMA5D2_MR_TRGSEL_TRIG6 6
+/* RTCOUT0 */
+#define AT91_SAMA5D2_MR_TRGSEL_TRIG7 7
+/* Sleep Mode */
+#define AT91_SAMA5D2_MR_SLEEP BIT(5)
+/* Fast Wake Up */
+#define AT91_SAMA5D2_MR_FWUP BIT(6)
+/* Prescaler Rate Selection */
+#define AT91_SAMA5D2_MR_PRESCAL(v) ((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET)
+#define AT91_SAMA5D2_MR_PRESCAL_OFFSET 8
+#define AT91_SAMA5D2_MR_PRESCAL_MAX 0xff
+/* Startup Time */
+#define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16)
+/* Analog Change */
+#define AT91_SAMA5D2_MR_ANACH BIT(23)
+/* Tracking Time */
+#define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24)
+#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff
+/* Transfer Time */
+#define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28)
+#define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3
+/* Use Sequence Enable */
+#define AT91_SAMA5D2_MR_USEQ BIT(31)
+
+/* Channel Sequence Register 1 */
+#define AT91_SAMA5D2_SEQR1 0x08
+/* Channel Sequence Register 2 */
+#define AT91_SAMA5D2_SEQR2 0x0c
+/* Channel Enable Register */
+#define AT91_SAMA5D2_CHER 0x10
+/* Channel Disable Register */
+#define AT91_SAMA5D2_CHDR 0x14
+/* Channel Status Register */
+#define AT91_SAMA5D2_CHSR 0x18
+/* Last Converted Data Register */
+#define AT91_SAMA5D2_LCDR 0x20
+/* Interrupt Enable Register */
+#define AT91_SAMA5D2_IER 0x24
+/* Interrupt Disable Register */
+#define AT91_SAMA5D2_IDR 0x28
+/* Interrupt Mask Register */
+#define AT91_SAMA5D2_IMR 0x2c
+/* Interrupt Status Register */
+#define AT91_SAMA5D2_ISR 0x30
+/* Last Channel Trigger Mode Register */
+#define AT91_SAMA5D2_LCTMR 0x34
+/* Last Channel Compare Window Register */
+#define AT91_SAMA5D2_LCCWR 0x38
+/* Overrun Status Register */
+#define AT91_SAMA5D2_OVER 0x3c
+/* Extended Mode Register */
+#define AT91_SAMA5D2_EMR 0x40
+/* Compare Window Register */
+#define AT91_SAMA5D2_CWR 0x44
+/* Channel Gain Register */
+#define AT91_SAMA5D2_CGR 0x48
+/* Channel Offset Register */
+#define AT91_SAMA5D2_COR 0x4c
+/* Channel Data Register 0 */
+#define AT91_SAMA5D2_CDR0 0x50
+/* Analog Control Register */
+#define AT91_SAMA5D2_ACR 0x94
+/* Touchscreen Mode Register */
+#define AT91_SAMA5D2_TSMR 0xb0
+/* Touchscreen X Position Register */
+#define AT91_SAMA5D2_XPOSR 0xb4
+/* Touchscreen Y Position Register */
+#define AT91_SAMA5D2_YPOSR 0xb8
+/* Touchscreen Pressure Register */
+#define AT91_SAMA5D2_PRESSR 0xbc
+/* Trigger Register */
+#define AT91_SAMA5D2_TRGR 0xc0
+/* Correction Select Register */
+#define AT91_SAMA5D2_COSR 0xd0
+/* Correction Value Register */
+#define AT91_SAMA5D2_CVR 0xd4
+/* Channel Error Correction Register */
+#define AT91_SAMA5D2_CECR 0xd8
+/* Write Protection Mode Register */
+#define AT91_SAMA5D2_WPMR 0xe4
+/* Write Protection Status Register */
+#define AT91_SAMA5D2_WPSR 0xe8
+/* Version Register */
+#define AT91_SAMA5D2_VERSION 0xfc
+
+#define AT91_AT91_SAMA5D2_CHAN(num, addr) \
+ { \
+ .type = IIO_VOLTAGE, \
+ .channel = num, \
+ .address = addr, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 12, \
+ }, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+ .datasheet_name = "CH"#num, \
+ .indexed = 1, \
+ }
+
+#define at91_adc_readl(st, reg) readl_relaxed(st->base + reg)
+#define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg)
+
+struct at91_adc_soc_info {
+ unsigned startup_time;
+ unsigned min_sample_rate;
+ unsigned max_sample_rate;
+};
+
+struct at91_adc_state {
+ void __iomem *base;
+ int irq;
+ struct clk *per_clk;
+ struct regulator *reg;
+ struct regulator *vref;
+ int vref_uv;
+ const struct iio_chan_spec *chan;
+ bool conversion_done;
+ u32 conversion_value;
+ struct at91_adc_soc_info soc_info;
+ wait_queue_head_t wq_data_available;
+ /*
+ * lock to prevent concurrent 'single conversion' requests through
+ * sysfs.
+ */
+ struct mutex lock;
+};
+
+static const struct iio_chan_spec at91_adc_channels[] = {
+ AT91_AT91_SAMA5D2_CHAN(0, 0x50),
+ AT91_AT91_SAMA5D2_CHAN(1, 0x54),
+ AT91_AT91_SAMA5D2_CHAN(2, 0x58),
+ AT91_AT91_SAMA5D2_CHAN(3, 0x5c),
+ AT91_AT91_SAMA5D2_CHAN(4, 0x60),
+ AT91_AT91_SAMA5D2_CHAN(5, 0x64),
+ AT91_AT91_SAMA5D2_CHAN(6, 0x68),
+ AT91_AT91_SAMA5D2_CHAN(7, 0x6c),
+ AT91_AT91_SAMA5D2_CHAN(8, 0x70),
+ AT91_AT91_SAMA5D2_CHAN(9, 0x74),
+ AT91_AT91_SAMA5D2_CHAN(10, 0x78),
+ AT91_AT91_SAMA5D2_CHAN(11, 0x7c),
+};
+
+static unsigned at91_adc_startup_time(unsigned startup_time_min,
+ unsigned adc_clk_khz)
+{
+ const unsigned startup_lookup[] = {
+ 0, 8, 16, 24,
+ 64, 80, 96, 112,
+ 512, 576, 640, 704,
+ 768, 832, 896, 960
+ };
+ unsigned ticks_min, i;
+
+ /*
+ * Since the adc frequency is checked before, there is no reason
+ * to not meet the startup time constraint.
+ */
+
+ ticks_min = startup_time_min * adc_clk_khz / 1000;
+ for (i = 0; i < ARRAY_SIZE(startup_lookup); i++)
+ if (startup_lookup[i] > ticks_min)
+ break;
+
+ return i;
+}
+
+static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
+{
+ struct iio_dev *indio_dev = iio_priv_to_dev(st);
+ unsigned f_per, prescal, startup;
+
+ f_per = clk_get_rate(st->per_clk);
+ prescal = (f_per / (2 * freq)) - 1;
+
+ startup = at91_adc_startup_time(st->soc_info.startup_time,
+ freq / 1000);
+
+ at91_adc_writel(st, AT91_SAMA5D2_MR,
+ AT91_SAMA5D2_MR_TRANSFER(2)
+ | AT91_SAMA5D2_MR_STARTUP(startup)
+ | AT91_SAMA5D2_MR_PRESCAL(prescal));
+
+ dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
+ freq, startup, prescal);
+}
+
+static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st)
+{
+ unsigned f_adc, f_per = clk_get_rate(st->per_clk);
+ unsigned mr, prescal;
+
+ mr = at91_adc_readl(st, AT91_SAMA5D2_MR);
+ prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET)
+ & AT91_SAMA5D2_MR_PRESCAL_MAX;
+ f_adc = f_per / (2 * (prescal + 1));
+
+ return f_adc;
+}
+
+static irqreturn_t at91_adc_interrupt(int irq, void *private)
+{
+ struct iio_dev *indio = private;
+ struct at91_adc_state *st = iio_priv(indio);
+ u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR);
+ u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR);
+
+ if (status & imr) {
+ st->conversion_value = at91_adc_readl(st, st->chan->address);
+ st->conversion_done = true;
+ wake_up_interruptible(&st->wq_data_available);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int at91_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct at91_adc_state *st = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&st->lock);
+
+ st->chan = chan;
+
+ at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel));
+ at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel));
+ at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START);
+
+ ret = wait_event_interruptible_timeout(st->wq_data_available,
+ st->conversion_done,
+ msecs_to_jiffies(1000));
+ if (ret == 0)
+ ret = -ETIMEDOUT;
+
+ if (ret > 0) {
+ *val = st->conversion_value;
+ ret = IIO_VAL_INT;
+ st->conversion_done = false;
+ }
+
+ at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel));
+ at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel));
+
+ mutex_unlock(&st->lock);
+ return ret;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = st->vref_uv / 1000;
+ *val2 = chan->scan_type.realbits;
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = at91_adc_get_sample_freq(st);
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int at91_adc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct at91_adc_state *st = iio_priv(indio_dev);
+
+ if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ if (val < st->soc_info.min_sample_rate ||
+ val > st->soc_info.max_sample_rate)
+ return -EINVAL;
+
+ at91_adc_setup_samp_freq(st, val);
+
+ return 0;
+}
+
+static const struct iio_info at91_adc_info = {
+ .read_raw = &at91_adc_read_raw,
+ .write_raw = &at91_adc_write_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int at91_adc_probe(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev;
+ struct at91_adc_state *st;
+ struct resource *res;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &at91_adc_info;
+ indio_dev->channels = at91_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels);
+
+ st = iio_priv(indio_dev);
+
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "atmel,min-sample-rate-hz",
+ &st->soc_info.min_sample_rate);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "invalid or missing value for atmel,min-sample-rate-hz\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "atmel,max-sample-rate-hz",
+ &st->soc_info.max_sample_rate);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "invalid or missing value for atmel,max-sample-rate-hz\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms",
+ &st->soc_info.startup_time);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "invalid or missing value for atmel,startup-time-ms\n");
+ return ret;
+ }
+
+ init_waitqueue_head(&st->wq_data_available);
+ mutex_init(&st->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ st->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(st->base))
+ return PTR_ERR(st->base);
+
+ st->irq = platform_get_irq(pdev, 0);
+ if (st->irq <= 0) {
+ if (!st->irq)
+ st->irq = -ENXIO;
+
+ return st->irq;
+ }
+
+ st->per_clk = devm_clk_get(&pdev->dev, "adc_clk");
+ if (IS_ERR(st->per_clk))
+ return PTR_ERR(st->per_clk);
+
+ st->reg = devm_regulator_get(&pdev->dev, "vddana");
+ if (IS_ERR(st->reg))
+ return PTR_ERR(st->reg);
+
+ st->vref = devm_regulator_get(&pdev->dev, "vref");
+ if (IS_ERR(st->vref))
+ return PTR_ERR(st->vref);
+
+ ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0,
+ pdev->dev.driver->name, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = regulator_enable(st->reg);
+ if (ret)
+ return ret;
+
+ ret = regulator_enable(st->vref);
+ if (ret)
+ goto reg_disable;
+
+ st->vref_uv = regulator_get_voltage(st->vref);
+ if (st->vref_uv <= 0) {
+ ret = -EINVAL;
+ goto vref_disable;
+ }
+
+ at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
+ at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
+
+ at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
+
+ ret = clk_prepare_enable(st->per_clk);
+ if (ret)
+ goto vref_disable;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ goto per_clk_disable_unprepare;
+
+ dev_info(&pdev->dev, "version: %x\n",
+ readl_relaxed(st->base + AT91_SAMA5D2_VERSION));
+
+ return 0;
+
+per_clk_disable_unprepare:
+ clk_disable_unprepare(st->per_clk);
+vref_disable:
+ regulator_disable(st->vref);
+reg_disable:
+ regulator_disable(st->reg);
+ return ret;
+}
+
+static int at91_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct at91_adc_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ clk_disable_unprepare(st->per_clk);
+
+ regulator_disable(st->vref);
+ regulator_disable(st->reg);
+
+ return 0;
+}
+
+static const struct of_device_id at91_adc_dt_match[] = {
+ {
+ .compatible = "atmel,sama5d2-adc",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, at91_adc_dt_match);
+
+static struct platform_driver at91_adc_driver = {
+ .probe = at91_adc_probe,
+ .remove = at91_adc_remove,
+ .driver = {
+ .name = "at91-sama5d2_adc",
+ .of_match_table = at91_adc_dt_match,
+ },
+};
+module_platform_driver(at91_adc_driver)
+
+MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
+MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 0c904edd6c00..7fd24949c0c1 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -46,7 +46,7 @@ struct axp288_adc_info {
struct regmap *regmap;
};
-static const struct iio_chan_spec const axp288_adc_channels[] = {
+static const struct iio_chan_spec axp288_adc_channels[] = {
{
.indexed = 1,
.type = IIO_TEMP,
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index d1c05f6eed18..a850ca7d1eda 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -187,26 +187,27 @@ out:
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
}
-#define MCP320X_VOLTAGE_CHANNEL_DIFF(num) \
+#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \
{ \
.type = IIO_VOLTAGE, \
.indexed = 1, \
- .channel = (num * 2), \
- .channel2 = (num * 2 + 1), \
- .address = (num * 2), \
+ .channel = (chan1), \
+ .channel2 = (chan2), \
+ .address = (chan1), \
.differential = 1, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
}
static const struct iio_chan_spec mcp3201_channels[] = {
- MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
};
static const struct iio_chan_spec mcp3202_channels[] = {
MCP320X_VOLTAGE_CHANNEL(0),
MCP320X_VOLTAGE_CHANNEL(1),
- MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
};
static const struct iio_chan_spec mcp3204_channels[] = {
@@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = {
MCP320X_VOLTAGE_CHANNEL(1),
MCP320X_VOLTAGE_CHANNEL(2),
MCP320X_VOLTAGE_CHANNEL(3),
- MCP320X_VOLTAGE_CHANNEL_DIFF(0),
- MCP320X_VOLTAGE_CHANNEL_DIFF(1),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
};
static const struct iio_chan_spec mcp3208_channels[] = {
@@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = {
MCP320X_VOLTAGE_CHANNEL(5),
MCP320X_VOLTAGE_CHANNEL(6),
MCP320X_VOLTAGE_CHANNEL(7),
- MCP320X_VOLTAGE_CHANNEL_DIFF(0),
- MCP320X_VOLTAGE_CHANNEL_DIFF(1),
- MCP320X_VOLTAGE_CHANNEL_DIFF(2),
- MCP320X_VOLTAGE_CHANNEL_DIFF(3),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6),
};
static const struct iio_info mcp320x_info = {
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 6eca7aea8a37..ebad83e3fbf7 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -1,11 +1,12 @@
/*
- * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family
+ * mcp3422.c - driver for the Microchip mcp3421/2/3/4/5/6/7/8 chip family
*
* Copyright (C) 2013, Angelo Compagnucci
* Author: Angelo Compagnucci <angelo.compagnucci@gmail.com>
*
* Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf
* http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/22072b.pdf
*
* This driver exports the value of analog input voltage to sysfs, the
* voltage unit is nV.
@@ -357,6 +358,7 @@ static int mcp3422_probe(struct i2c_client *client,
switch (adc->id) {
case 1:
+ case 5:
indio_dev->channels = mcp3421_channels;
indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels);
break;
@@ -395,6 +397,7 @@ static const struct i2c_device_id mcp3422_id[] = {
{ "mcp3422", 2 },
{ "mcp3423", 3 },
{ "mcp3424", 4 },
+ { "mcp3425", 5 },
{ "mcp3426", 6 },
{ "mcp3427", 7 },
{ "mcp3428", 8 },
@@ -421,5 +424,5 @@ static struct i2c_driver mcp3422_driver = {
module_i2c_driver(mcp3422_driver);
MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
-MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver");
+MODULE_DESCRIPTION("Microchip mcp3421/2/3/4/5/6/7/8 driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index f16de61be46d..ce7cd1370f74 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -4,6 +4,19 @@
menu "Chemical Sensors"
+config ATLAS_PH_SENSOR
+ tristate "Atlas Scientific OEM pH-SM sensor"
+ depends on I2C
+ select REGMAP_I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say Y here to build I2C interface support for the Atlas
+ Scientific OEM pH-SM sensor.
+
+ To compile this driver as module, choose M here: the
+ module will be called atlas-ph-sensor.
+
config IAQCORE
tristate "AMS iAQ-Core VOC sensors"
depends on I2C
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index 167861fadfab..b02202b41289 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -3,5 +3,6 @@
#
# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-ph-sensor.o
obj-$(CONFIG_IAQCORE) += ams-iaq-core.o
obj-$(CONFIG_VZ89X) += vz89x.o
diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
new file mode 100644
index 000000000000..06cd49cbfae1
--- /dev/null
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
@@ -0,0 +1,511 @@
+/*
+ * atlas-ph-sensor.c - Support for Atlas Scientific OEM pH-SM sensor
+ *
+ * Copyright (C) 2015 Matt Ranostay <mranostay@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/irq_work.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/pm_runtime.h>
+
+#define ATLAS_REGMAP_NAME "atlas_ph_regmap"
+#define ATLAS_DRV_NAME "atlas_ph"
+
+#define ATLAS_REG_DEV_TYPE 0x00
+#define ATLAS_REG_DEV_VERSION 0x01
+
+#define ATLAS_REG_INT_CONTROL 0x04
+#define ATLAS_REG_INT_CONTROL_EN BIT(3)
+
+#define ATLAS_REG_PWR_CONTROL 0x06
+
+#define ATLAS_REG_CALIB_STATUS 0x0d
+#define ATLAS_REG_CALIB_STATUS_MASK 0x07
+#define ATLAS_REG_CALIB_STATUS_LOW BIT(0)
+#define ATLAS_REG_CALIB_STATUS_MID BIT(1)
+#define ATLAS_REG_CALIB_STATUS_HIGH BIT(2)
+
+#define ATLAS_REG_TEMP_DATA 0x0e
+#define ATLAS_REG_PH_DATA 0x16
+
+#define ATLAS_PH_INT_TIME_IN_US 450000
+
+struct atlas_data {
+ struct i2c_client *client;
+ struct iio_trigger *trig;
+ struct regmap *regmap;
+ struct irq_work work;
+
+ __be32 buffer[4]; /* 32-bit pH data + 32-bit pad + 64-bit timestamp */
+};
+
+static const struct regmap_range atlas_volatile_ranges[] = {
+ regmap_reg_range(ATLAS_REG_INT_CONTROL, ATLAS_REG_INT_CONTROL),
+ regmap_reg_range(ATLAS_REG_CALIB_STATUS, ATLAS_REG_CALIB_STATUS),
+ regmap_reg_range(ATLAS_REG_TEMP_DATA, ATLAS_REG_TEMP_DATA + 4),
+ regmap_reg_range(ATLAS_REG_PH_DATA, ATLAS_REG_PH_DATA + 4),
+};
+
+static const struct regmap_access_table atlas_volatile_table = {
+ .yes_ranges = atlas_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(atlas_volatile_ranges),
+};
+
+static const struct regmap_config atlas_regmap_config = {
+ .name = ATLAS_REGMAP_NAME,
+
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .volatile_table = &atlas_volatile_table,
+ .max_register = ATLAS_REG_PH_DATA + 4,
+ .cache_type = REGCACHE_FLAT,
+};
+
+static const struct iio_chan_spec atlas_channels[] = {
+ {
+ .type = IIO_PH,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 32,
+ .storagebits = 32,
+ .endianness = IIO_BE,
+ },
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(1),
+ {
+ .type = IIO_TEMP,
+ .address = ATLAS_REG_TEMP_DATA,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .output = 1,
+ .scan_index = -1
+ },
+};
+
+static int atlas_set_powermode(struct atlas_data *data, int on)
+{
+ return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on);
+}
+
+static int atlas_set_interrupt(struct atlas_data *data, bool state)
+{
+ return regmap_update_bits(data->regmap, ATLAS_REG_INT_CONTROL,
+ ATLAS_REG_INT_CONTROL_EN,
+ state ? ATLAS_REG_INT_CONTROL_EN : 0);
+}
+
+static int atlas_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct atlas_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = iio_triggered_buffer_postenable(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_get_sync(&data->client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&data->client->dev);
+ return ret;
+ }
+
+ return atlas_set_interrupt(data, true);
+}
+
+static int atlas_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct atlas_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = iio_triggered_buffer_predisable(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = atlas_set_interrupt(data, false);
+ if (ret)
+ return ret;
+
+ pm_runtime_mark_last_busy(&data->client->dev);
+ return pm_runtime_put_autosuspend(&data->client->dev);
+}
+
+static const struct iio_trigger_ops atlas_interrupt_trigger_ops = {
+ .owner = THIS_MODULE,
+};
+
+static const struct iio_buffer_setup_ops atlas_buffer_setup_ops = {
+ .postenable = atlas_buffer_postenable,
+ .predisable = atlas_buffer_predisable,
+};
+
+static void atlas_work_handler(struct irq_work *work)
+{
+ struct atlas_data *data = container_of(work, struct atlas_data, work);
+
+ iio_trigger_poll(data->trig);
+}
+
+static irqreturn_t atlas_trigger_handler(int irq, void *private)
+{
+ struct iio_poll_func *pf = private;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct atlas_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(data->client, ATLAS_REG_PH_DATA,
+ sizeof(data->buffer[0]), (u8 *) &data->buffer);
+
+ if (ret > 0)
+ iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+ iio_get_time_ns());
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t atlas_interrupt_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct atlas_data *data = iio_priv(indio_dev);
+
+ irq_work_queue(&data->work);
+
+ return IRQ_HANDLED;
+}
+
+static int atlas_read_ph_measurement(struct atlas_data *data, __be32 *val)
+{
+ struct device *dev = &data->client->dev;
+ int suspended = pm_runtime_suspended(dev);
+ int ret;
+
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(dev);
+ return ret;
+ }
+
+ if (suspended)
+ usleep_range(ATLAS_PH_INT_TIME_IN_US,
+ ATLAS_PH_INT_TIME_IN_US + 100000);
+
+ ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA,
+ (u8 *) val, sizeof(*val));
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return ret;
+}
+
+static int atlas_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct atlas_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW: {
+ int ret;
+ __be32 reg;
+
+ switch (chan->type) {
+ case IIO_TEMP:
+ ret = regmap_bulk_read(data->regmap, chan->address,
+ (u8 *) &reg, sizeof(reg));
+ break;
+ case IIO_PH:
+ mutex_lock(&indio_dev->mlock);
+
+ if (iio_buffer_enabled(indio_dev))
+ ret = -EBUSY;
+ else
+ ret = atlas_read_ph_measurement(data, &reg);
+
+ mutex_unlock(&indio_dev->mlock);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ if (!ret) {
+ *val = be32_to_cpu(reg);
+ ret = IIO_VAL_INT;
+ }
+ return ret;
+ }
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = 1; /* 0.01 */
+ *val2 = 100;
+ break;
+ case IIO_PH:
+ *val = 1; /* 0.001 */
+ *val2 = 1000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return IIO_VAL_FRACTIONAL;
+ }
+
+ return -EINVAL;
+}
+
+static int atlas_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct atlas_data *data = iio_priv(indio_dev);
+ __be32 reg = cpu_to_be32(val);
+
+ if (val2 != 0 || val < 0 || val > 20000)
+ return -EINVAL;
+
+ if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_TEMP)
+ return -EINVAL;
+
+ return regmap_bulk_write(data->regmap, chan->address,
+ &reg, sizeof(reg));
+}
+
+static const struct iio_info atlas_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = atlas_read_raw,
+ .write_raw = atlas_write_raw,
+};
+
+static int atlas_check_calibration(struct atlas_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(data->regmap, ATLAS_REG_CALIB_STATUS, &val);
+ if (ret)
+ return ret;
+
+ if (!(val & ATLAS_REG_CALIB_STATUS_MASK)) {
+ dev_warn(dev, "device has not been calibrated\n");
+ return 0;
+ }
+
+ if (!(val & ATLAS_REG_CALIB_STATUS_LOW))
+ dev_warn(dev, "device missing low point calibration\n");
+
+ if (!(val & ATLAS_REG_CALIB_STATUS_MID))
+ dev_warn(dev, "device missing mid point calibration\n");
+
+ if (!(val & ATLAS_REG_CALIB_STATUS_HIGH))
+ dev_warn(dev, "device missing high point calibration\n");
+
+ return 0;
+};
+
+static int atlas_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct atlas_data *data;
+ struct iio_trigger *trig;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ indio_dev->info = &atlas_info;
+ indio_dev->name = ATLAS_DRV_NAME;
+ indio_dev->channels = atlas_channels;
+ indio_dev->num_channels = ARRAY_SIZE(atlas_channels);
+ indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE;
+ indio_dev->dev.parent = &client->dev;
+
+ trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
+ indio_dev->name, indio_dev->id);
+
+ if (!trig)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ data->trig = trig;
+ trig->dev.parent = indio_dev->dev.parent;
+ trig->ops = &atlas_interrupt_trigger_ops;
+ iio_trigger_set_drvdata(trig, indio_dev);
+
+ i2c_set_clientdata(client, indio_dev);
+
+ data->regmap = devm_regmap_init_i2c(client, &atlas_regmap_config);
+ if (IS_ERR(data->regmap)) {
+ dev_err(&client->dev, "regmap initialization failed\n");
+ return PTR_ERR(data->regmap);
+ }
+
+ ret = pm_runtime_set_active(&client->dev);
+ if (ret)
+ return ret;
+
+ if (client->irq <= 0) {
+ dev_err(&client->dev, "no valid irq defined\n");
+ return -EINVAL;
+ }
+
+ ret = atlas_check_calibration(data);
+ if (ret)
+ return ret;
+
+ ret = iio_trigger_register(trig);
+ if (ret) {
+ dev_err(&client->dev, "failed to register trigger\n");
+ return ret;
+ }
+
+ ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &atlas_trigger_handler, &atlas_buffer_setup_ops);
+ if (ret) {
+ dev_err(&client->dev, "cannot setup iio trigger\n");
+ goto unregister_trigger;
+ }
+
+ init_irq_work(&data->work, atlas_work_handler);
+
+ /* interrupt pin toggles on new conversion */
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, atlas_interrupt_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "atlas_irq",
+ indio_dev);
+ if (ret) {
+ dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
+ goto unregister_buffer;
+ }
+
+ ret = atlas_set_powermode(data, 1);
+ if (ret) {
+ dev_err(&client->dev, "cannot power device on");
+ goto unregister_buffer;
+ }
+
+ pm_runtime_enable(&client->dev);
+ pm_runtime_set_autosuspend_delay(&client->dev, 2500);
+ pm_runtime_use_autosuspend(&client->dev);
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(&client->dev, "unable to register device\n");
+ goto unregister_pm;
+ }
+
+ return 0;
+
+unregister_pm:
+ pm_runtime_disable(&client->dev);
+ atlas_set_powermode(data, 0);
+
+unregister_buffer:
+ iio_triggered_buffer_cleanup(indio_dev);
+
+unregister_trigger:
+ iio_trigger_unregister(data->trig);
+
+ return ret;
+}
+
+static int atlas_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct atlas_data *data = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+ iio_trigger_unregister(data->trig);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+ pm_runtime_put_noidle(&client->dev);
+
+ return atlas_set_powermode(data, 0);
+}
+
+#ifdef CONFIG_PM
+static int atlas_runtime_suspend(struct device *dev)
+{
+ struct atlas_data *data =
+ iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+ return atlas_set_powermode(data, 0);
+}
+
+static int atlas_runtime_resume(struct device *dev)
+{
+ struct atlas_data *data =
+ iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+ return atlas_set_powermode(data, 1);
+}
+#endif
+
+static const struct dev_pm_ops atlas_pm_ops = {
+ SET_RUNTIME_PM_OPS(atlas_runtime_suspend,
+ atlas_runtime_resume, NULL)
+};
+
+static const struct i2c_device_id atlas_id[] = {
+ { "atlas-ph-sm", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, atlas_id);
+
+static const struct of_device_id atlas_dt_ids[] = {
+ { .compatible = "atlas,ph-sm" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, atlas_dt_ids);
+
+static struct i2c_driver atlas_driver = {
+ .driver = {
+ .name = ATLAS_DRV_NAME,
+ .of_match_table = of_match_ptr(atlas_dt_ids),
+ .pm = &atlas_pm_ops,
+ },
+ .probe = atlas_probe,
+ .remove = atlas_remove,
+ .id_table = atlas_id,
+};
+module_i2c_driver(atlas_driver);
+
+MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>");
+MODULE_DESCRIPTION("Atlas Scientific pH-SM sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 8447c31e27f2..f5a2d445d0c0 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -18,13 +18,15 @@
#include <asm/unaligned.h>
#include <linux/iio/common/st_sensors.h>
+#include "st_sensors_core.h"
+
static inline u32 st_sensors_get_unaligned_le24(const u8 *p)
{
return (s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8;
}
-static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
- u8 reg_addr, u8 mask, u8 data)
+int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
+ u8 reg_addr, u8 mask, u8 data)
{
int err;
u8 new_data;
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.h b/drivers/iio/common/st_sensors/st_sensors_core.h
new file mode 100644
index 000000000000..cd88098ff6f1
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_core.h
@@ -0,0 +1,8 @@
+/*
+ * Local functions in the ST Sensors core
+ */
+#ifndef __ST_SENSORS_CORE_H
+#define __ST_SENSORS_CORE_H
+int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
+ u8 reg_addr, u8 mask, u8 data);
+#endif
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 3e907040c2c7..6a8c98327945 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -14,32 +14,65 @@
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
#include <linux/interrupt.h>
-
#include <linux/iio/common/st_sensors.h>
-
+#include "st_sensors_core.h"
int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops)
{
- int err;
+ int err, irq;
struct st_sensor_data *sdata = iio_priv(indio_dev);
+ unsigned long irq_trig;
sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name);
if (sdata->trig == NULL) {
- err = -ENOMEM;
dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n");
- goto iio_trigger_alloc_error;
+ return -ENOMEM;
}
- err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
+ irq = sdata->get_irq_data_ready(indio_dev);
+ irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+ /*
+ * If the IRQ is triggered on falling edge, we need to mark the
+ * interrupt as active low, if the hardware supports this.
+ */
+ if (irq_trig == IRQF_TRIGGER_FALLING) {
+ if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
+ dev_err(&indio_dev->dev,
+ "falling edge specified for IRQ but hardware "
+ "only support rising edge, will request "
+ "rising edge\n");
+ irq_trig = IRQF_TRIGGER_RISING;
+ } else {
+ /* Set up INT active low i.e. falling edge */
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sdata->sensor_settings->drdy_irq.addr_ihl,
+ sdata->sensor_settings->drdy_irq.mask_ihl, 1);
+ if (err < 0)
+ goto iio_trigger_free;
+ dev_info(&indio_dev->dev,
+ "interrupts on the falling edge\n");
+ }
+ } else if (irq_trig == IRQF_TRIGGER_RISING) {
+ dev_info(&indio_dev->dev,
+ "interrupts on the rising edge\n");
+
+ } else {
+ dev_err(&indio_dev->dev,
+ "unsupported IRQ trigger specified (%lx), only "
+ "rising and falling edges supported, enforce "
+ "rising edge\n", irq_trig);
+ irq_trig = IRQF_TRIGGER_RISING;
+ }
+ err = request_threaded_irq(irq,
iio_trigger_generic_data_rdy_poll,
NULL,
- IRQF_TRIGGER_RISING,
+ irq_trig,
sdata->trig->name,
sdata->trig);
if (err) {
dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n");
- goto request_irq_error;
+ goto iio_trigger_free;
}
iio_trigger_set_drvdata(sdata->trig, indio_dev);
@@ -57,9 +90,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
iio_trigger_register_error:
free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
-request_irq_error:
+iio_trigger_free:
iio_trigger_free(sdata->trig);
-iio_trigger_alloc_error:
return err;
}
EXPORT_SYMBOL(st_sensors_allocate_trigger);
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index e701e28fb1cd..5dc71505da61 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -111,6 +111,16 @@ config AD5755
To compile this driver as a module, choose M here: the
module will be called ad5755.
+config AD5761
+ tristate "Analog Devices AD5761/61R/21/21R DAC driver"
+ depends on SPI_MASTER
+ help
+ Say yes here to build support for Analog Devices AD5761, AD5761R, AD5721,
+ AD5721R Digital to Analog Converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad5761.
+
config AD5764
tristate "Analog Devices AD5764/64R/44/44R DAC driver"
depends on SPI_MASTER
@@ -176,11 +186,11 @@ config MAX5821
10 bits DAC.
config MCP4725
- tristate "MCP4725 DAC driver"
+ tristate "MCP4725/6 DAC driver"
depends on I2C
---help---
Say Y here if you want to build a driver for the Microchip
- MCP 4725 12-bit digital-to-analog converter (DAC) with I2C
+ MCP 4725/6 12-bit digital-to-analog converter (DAC) with I2C
interface.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 63ae05633e0c..cb525b53fc7b 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_AD5504) += ad5504.o
obj-$(CONFIG_AD5446) += ad5446.o
obj-$(CONFIG_AD5449) += ad5449.o
obj-$(CONFIG_AD5755) += ad5755.o
+obj-$(CONFIG_AD5761) += ad5761.o
obj-$(CONFIG_AD5764) += ad5764.o
obj-$(CONFIG_AD5791) += ad5791.o
obj-$(CONFIG_AD5686) += ad5686.o
diff --git a/drivers/iio/dac/ad5761.c b/drivers/iio/dac/ad5761.c
new file mode 100644
index 000000000000..d6510d6928b3
--- /dev/null
+++ b/drivers/iio/dac/ad5761.c
@@ -0,0 +1,430 @@
+/*
+ * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter
+ *
+ * Copyright 2016 Qtechnology A/S
+ * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ *
+ * Licensed under the GPL-2.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/bitops.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/regulator/consumer.h>
+#include <linux/platform_data/ad5761.h>
+
+#define AD5761_ADDR(addr) ((addr & 0xf) << 16)
+#define AD5761_ADDR_NOOP 0x0
+#define AD5761_ADDR_DAC_WRITE 0x3
+#define AD5761_ADDR_CTRL_WRITE_REG 0x4
+#define AD5761_ADDR_SW_DATA_RESET 0x7
+#define AD5761_ADDR_DAC_READ 0xb
+#define AD5761_ADDR_CTRL_READ_REG 0xc
+#define AD5761_ADDR_SW_FULL_RESET 0xf
+
+#define AD5761_CTRL_USE_INTVREF BIT(5)
+#define AD5761_CTRL_ETS BIT(6)
+
+/**
+ * struct ad5761_chip_info - chip specific information
+ * @int_vref: Value of the internal reference voltage in mV - 0 if external
+ * reference voltage is used
+ * @channel: channel specification
+*/
+
+struct ad5761_chip_info {
+ unsigned long int_vref;
+ const struct iio_chan_spec channel;
+};
+
+struct ad5761_range_params {
+ int m;
+ int c;
+};
+
+enum ad5761_supported_device_ids {
+ ID_AD5721,
+ ID_AD5721R,
+ ID_AD5761,
+ ID_AD5761R,
+};
+
+/**
+ * struct ad5761_state - driver instance specific data
+ * @spi: spi_device
+ * @vref_reg: reference voltage regulator
+ * @use_intref: true when the internal voltage reference is used
+ * @vref: actual voltage reference in mVolts
+ * @range: output range mode used
+ * @data: cache aligned spi buffer
+ */
+struct ad5761_state {
+ struct spi_device *spi;
+ struct regulator *vref_reg;
+
+ bool use_intref;
+ int vref;
+ enum ad5761_voltage_range range;
+
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ union {
+ __be32 d32;
+ u8 d8[4];
+ } data[3] ____cacheline_aligned;
+};
+
+static const struct ad5761_range_params ad5761_range_params[] = {
+ [AD5761_VOLTAGE_RANGE_M10V_10V] = {
+ .m = 80,
+ .c = 40,
+ },
+ [AD5761_VOLTAGE_RANGE_0V_10V] = {
+ .m = 40,
+ .c = 0,
+ },
+ [AD5761_VOLTAGE_RANGE_M5V_5V] = {
+ .m = 40,
+ .c = 20,
+ },
+ [AD5761_VOLTAGE_RANGE_0V_5V] = {
+ .m = 20,
+ .c = 0,
+ },
+ [AD5761_VOLTAGE_RANGE_M2V5_7V5] = {
+ .m = 40,
+ .c = 10,
+ },
+ [AD5761_VOLTAGE_RANGE_M3V_3V] = {
+ .m = 24,
+ .c = 12,
+ },
+ [AD5761_VOLTAGE_RANGE_0V_16V] = {
+ .m = 64,
+ .c = 0,
+ },
+ [AD5761_VOLTAGE_RANGE_0V_20V] = {
+ .m = 80,
+ .c = 0,
+ },
+};
+
+static int _ad5761_spi_write(struct ad5761_state *st, u8 addr, u16 val)
+{
+ st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr) | val);
+
+ return spi_write(st->spi, &st->data[0].d8[1], 3);
+}
+
+static int ad5761_spi_write(struct iio_dev *indio_dev, u8 addr, u16 val)
+{
+ struct ad5761_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+ ret = _ad5761_spi_write(st, addr, val);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int _ad5761_spi_read(struct ad5761_state *st, u8 addr, u16 *val)
+{
+ int ret;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = &st->data[0].d8[1],
+ .bits_per_word = 8,
+ .len = 3,
+ .cs_change = true,
+ }, {
+ .tx_buf = &st->data[1].d8[1],
+ .rx_buf = &st->data[2].d8[1],
+ .bits_per_word = 8,
+ .len = 3,
+ },
+ };
+
+ st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr));
+ st->data[1].d32 = cpu_to_be32(AD5761_ADDR(AD5761_ADDR_NOOP));
+
+ ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers));
+
+ *val = be32_to_cpu(st->data[2].d32);
+
+ return ret;
+}
+
+static int ad5761_spi_read(struct iio_dev *indio_dev, u8 addr, u16 *val)
+{
+ struct ad5761_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+ ret = _ad5761_spi_read(st, addr, val);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int ad5761_spi_set_range(struct ad5761_state *st,
+ enum ad5761_voltage_range range)
+{
+ u16 aux;
+ int ret;
+
+ aux = (range & 0x7) | AD5761_CTRL_ETS;
+
+ if (st->use_intref)
+ aux |= AD5761_CTRL_USE_INTVREF;
+
+ ret = _ad5761_spi_write(st, AD5761_ADDR_SW_FULL_RESET, 0);
+ if (ret)
+ return ret;
+
+ ret = _ad5761_spi_write(st, AD5761_ADDR_CTRL_WRITE_REG, aux);
+ if (ret)
+ return ret;
+
+ st->range = range;
+
+ return 0;
+}
+
+static int ad5761_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct ad5761_state *st;
+ int ret;
+ u16 aux;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = ad5761_spi_read(indio_dev, AD5761_ADDR_DAC_READ, &aux);
+ if (ret)
+ return ret;
+ *val = aux >> chan->scan_type.shift;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ st = iio_priv(indio_dev);
+ *val = st->vref * ad5761_range_params[st->range].m;
+ *val /= 10;
+ *val2 = chan->scan_type.realbits;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_CHAN_INFO_OFFSET:
+ st = iio_priv(indio_dev);
+ *val = -(1 << chan->scan_type.realbits);
+ *val *= ad5761_range_params[st->range].c;
+ *val /= ad5761_range_params[st->range].m;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad5761_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ u16 aux;
+
+ if (mask != IIO_CHAN_INFO_RAW)
+ return -EINVAL;
+
+ if (val2 || (val << chan->scan_type.shift) > 0xffff || val < 0)
+ return -EINVAL;
+
+ aux = val << chan->scan_type.shift;
+
+ return ad5761_spi_write(indio_dev, AD5761_ADDR_DAC_WRITE, aux);
+}
+
+static const struct iio_info ad5761_info = {
+ .read_raw = &ad5761_read_raw,
+ .write_raw = &ad5761_write_raw,
+ .driver_module = THIS_MODULE,
+};
+
+#define AD5761_CHAN(_bits) { \
+ .type = IIO_VOLTAGE, \
+ .output = 1, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_bits), \
+ .storagebits = 16, \
+ .shift = 16 - (_bits), \
+ }, \
+}
+
+static const struct ad5761_chip_info ad5761_chip_infos[] = {
+ [ID_AD5721] = {
+ .int_vref = 0,
+ .channel = AD5761_CHAN(12),
+ },
+ [ID_AD5721R] = {
+ .int_vref = 2500,
+ .channel = AD5761_CHAN(12),
+ },
+ [ID_AD5761] = {
+ .int_vref = 0,
+ .channel = AD5761_CHAN(16),
+ },
+ [ID_AD5761R] = {
+ .int_vref = 2500,
+ .channel = AD5761_CHAN(16),
+ },
+};
+
+static int ad5761_get_vref(struct ad5761_state *st,
+ const struct ad5761_chip_info *chip_info)
+{
+ int ret;
+
+ st->vref_reg = devm_regulator_get_optional(&st->spi->dev, "vref");
+ if (PTR_ERR(st->vref_reg) == -ENODEV) {
+ /* Use Internal regulator */
+ if (!chip_info->int_vref) {
+ dev_err(&st->spi->dev,
+ "Voltage reference not found\n");
+ return -EIO;
+ }
+
+ st->use_intref = true;
+ st->vref = chip_info->int_vref;
+ return 0;
+ }
+
+ if (IS_ERR(st->vref_reg)) {
+ dev_err(&st->spi->dev,
+ "Error getting voltage reference regulator\n");
+ return PTR_ERR(st->vref_reg);
+ }
+
+ ret = regulator_enable(st->vref_reg);
+ if (ret) {
+ dev_err(&st->spi->dev,
+ "Failed to enable voltage reference\n");
+ return ret;
+ }
+
+ ret = regulator_get_voltage(st->vref_reg);
+ if (ret < 0) {
+ dev_err(&st->spi->dev,
+ "Failed to get voltage reference value\n");
+ goto disable_regulator_vref;
+ }
+
+ if (ret < 2000000 || ret > 3000000) {
+ dev_warn(&st->spi->dev,
+ "Invalid external voltage ref. value %d uV\n", ret);
+ ret = -EIO;
+ goto disable_regulator_vref;
+ }
+
+ st->vref = ret / 1000;
+ st->use_intref = false;
+
+ return 0;
+
+disable_regulator_vref:
+ regulator_disable(st->vref_reg);
+ st->vref_reg = NULL;
+ return ret;
+}
+
+static int ad5761_probe(struct spi_device *spi)
+{
+ struct iio_dev *iio_dev;
+ struct ad5761_state *st;
+ int ret;
+ const struct ad5761_chip_info *chip_info =
+ &ad5761_chip_infos[spi_get_device_id(spi)->driver_data];
+ enum ad5761_voltage_range voltage_range = AD5761_VOLTAGE_RANGE_0V_5V;
+ struct ad5761_platform_data *pdata = dev_get_platdata(&spi->dev);
+
+ iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!iio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(iio_dev);
+
+ st->spi = spi;
+ spi_set_drvdata(spi, iio_dev);
+
+ ret = ad5761_get_vref(st, chip_info);
+ if (ret)
+ return ret;
+
+ if (pdata)
+ voltage_range = pdata->voltage_range;
+
+ ret = ad5761_spi_set_range(st, voltage_range);
+ if (ret)
+ goto disable_regulator_err;
+
+ iio_dev->dev.parent = &spi->dev;
+ iio_dev->info = &ad5761_info;
+ iio_dev->modes = INDIO_DIRECT_MODE;
+ iio_dev->channels = &chip_info->channel;
+ iio_dev->num_channels = 1;
+ iio_dev->name = spi_get_device_id(st->spi)->name;
+ ret = iio_device_register(iio_dev);
+ if (ret)
+ goto disable_regulator_err;
+
+ return 0;
+
+disable_regulator_err:
+ if (!IS_ERR_OR_NULL(st->vref_reg))
+ regulator_disable(st->vref_reg);
+
+ return ret;
+}
+
+static int ad5761_remove(struct spi_device *spi)
+{
+ struct iio_dev *iio_dev = spi_get_drvdata(spi);
+ struct ad5761_state *st = iio_priv(iio_dev);
+
+ iio_device_unregister(iio_dev);
+
+ if (!IS_ERR_OR_NULL(st->vref_reg))
+ regulator_disable(st->vref_reg);
+
+ return 0;
+}
+
+static const struct spi_device_id ad5761_id[] = {
+ {"ad5721", ID_AD5721},
+ {"ad5721r", ID_AD5721R},
+ {"ad5761", ID_AD5761},
+ {"ad5761r", ID_AD5761R},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ad5761_id);
+
+static struct spi_driver ad5761_driver = {
+ .driver = {
+ .name = "ad5761",
+ },
+ .probe = ad5761_probe,
+ .remove = ad5761_remove,
+ .id_table = ad5761_id,
+};
+module_spi_driver(ad5761_driver);
+
+MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices AD5721, AD5721R, AD5761, AD5761R driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c
index 43d14588448d..fb4b3364d8e0 100644
--- a/drivers/iio/dac/mcp4725.c
+++ b/drivers/iio/dac/mcp4725.c
@@ -1,5 +1,5 @@
/*
- * mcp4725.c - Support for Microchip MCP4725
+ * mcp4725.c - Support for Microchip MCP4725/6
*
* Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net>
*
@@ -134,6 +134,12 @@ static const char * const mcp4725_powerdown_modes[] = {
"500kohm_to_gnd"
};
+static const char * const mcp4726_powerdown_modes[] = {
+ "1kohm_to_gnd",
+ "125kohm_to_gnd",
+ "640kohm_to_gnd"
+};
+
static int mcp4725_get_powerdown_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
@@ -182,11 +188,24 @@ static ssize_t mcp4725_write_powerdown(struct iio_dev *indio_dev,
return len;
}
-static const struct iio_enum mcp4725_powerdown_mode_enum = {
- .items = mcp4725_powerdown_modes,
- .num_items = ARRAY_SIZE(mcp4725_powerdown_modes),
- .get = mcp4725_get_powerdown_mode,
- .set = mcp4725_set_powerdown_mode,
+enum {
+ MCP4725,
+ MCP4726,
+};
+
+static const struct iio_enum mcp472x_powerdown_mode_enum[] = {
+ [MCP4725] = {
+ .items = mcp4725_powerdown_modes,
+ .num_items = ARRAY_SIZE(mcp4725_powerdown_modes),
+ .get = mcp4725_get_powerdown_mode,
+ .set = mcp4725_set_powerdown_mode,
+ },
+ [MCP4726] = {
+ .items = mcp4726_powerdown_modes,
+ .num_items = ARRAY_SIZE(mcp4726_powerdown_modes),
+ .get = mcp4725_get_powerdown_mode,
+ .set = mcp4725_set_powerdown_mode,
+ },
};
static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = {
@@ -196,19 +215,46 @@ static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = {
.write = mcp4725_write_powerdown,
.shared = IIO_SEPARATE,
},
- IIO_ENUM("powerdown_mode", IIO_SEPARATE, &mcp4725_powerdown_mode_enum),
- IIO_ENUM_AVAILABLE("powerdown_mode", &mcp4725_powerdown_mode_enum),
+ IIO_ENUM("powerdown_mode", IIO_SEPARATE,
+ &mcp472x_powerdown_mode_enum[MCP4725]),
+ IIO_ENUM_AVAILABLE("powerdown_mode",
+ &mcp472x_powerdown_mode_enum[MCP4725]),
+ { },
+};
+
+static const struct iio_chan_spec_ext_info mcp4726_ext_info[] = {
+ {
+ .name = "powerdown",
+ .read = mcp4725_read_powerdown,
+ .write = mcp4725_write_powerdown,
+ .shared = IIO_SEPARATE,
+ },
+ IIO_ENUM("powerdown_mode", IIO_SEPARATE,
+ &mcp472x_powerdown_mode_enum[MCP4726]),
+ IIO_ENUM_AVAILABLE("powerdown_mode",
+ &mcp472x_powerdown_mode_enum[MCP4726]),
{ },
};
-static const struct iio_chan_spec mcp4725_channel = {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .output = 1,
- .channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
- .ext_info = mcp4725_ext_info,
+static const struct iio_chan_spec mcp472x_channel[] = {
+ [MCP4725] = {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .output = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .ext_info = mcp4725_ext_info,
+ },
+ [MCP4726] = {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .output = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .ext_info = mcp4726_ext_info,
+ },
};
static int mcp4725_set_value(struct iio_dev *indio_dev, int val)
@@ -301,7 +347,7 @@ static int mcp4725_probe(struct i2c_client *client,
indio_dev->dev.parent = &client->dev;
indio_dev->info = &mcp4725_info;
- indio_dev->channels = &mcp4725_channel;
+ indio_dev->channels = &mcp472x_channel[id->driver_data];
indio_dev->num_channels = 1;
indio_dev->modes = INDIO_DIRECT_MODE;
@@ -315,7 +361,7 @@ static int mcp4725_probe(struct i2c_client *client,
}
pd = (inbuf[0] >> 1) & 0x3;
data->powerdown = pd > 0 ? true : false;
- data->powerdown_mode = pd ? pd-1 : 2; /* 500kohm_to_gnd */
+ data->powerdown_mode = pd ? pd - 1 : 2; /* largest register to gnd */
data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4);
return iio_device_register(indio_dev);
@@ -328,7 +374,8 @@ static int mcp4725_remove(struct i2c_client *client)
}
static const struct i2c_device_id mcp4725_id[] = {
- { "mcp4725", 0 },
+ { "mcp4725", MCP4725 },
+ { "mcp4726", MCP4726 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mcp4725_id);
@@ -345,5 +392,5 @@ static struct i2c_driver mcp4725_driver = {
module_i2c_driver(mcp4725_driver);
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
-MODULE_DESCRIPTION("MCP4725 12-bit DAC");
+MODULE_DESCRIPTION("MCP4725/6 12-bit DAC");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 02eddcebeea3..110f95b6e52f 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -185,6 +185,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.drdy_irq = {
.addr = ST_GYRO_1_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
+ /*
+ * The sensor has IHL (active low) and open
+ * drain settings, but only for INT1 and not
+ * for the DRDY line on INT2.
+ */
},
.multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
.bootime = 2,
@@ -248,6 +253,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.drdy_irq = {
.addr = ST_GYRO_2_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
+ /*
+ * The sensor has IHL (active low) and open
+ * drain settings, but only for INT1 and not
+ * for the DRDY line on INT2.
+ */
},
.multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
.bootime = 2,
@@ -307,6 +317,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.drdy_irq = {
.addr = ST_GYRO_3_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK,
+ /*
+ * The sensor has IHL (active low) and open
+ * drain settings, but only for INT1 and not
+ * for the DRDY line on INT2.
+ */
},
.multi_read_bit = ST_GYRO_3_MULTIREAD_BIT,
.bootime = 2,
diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c
index 9d1c81f91dd7..09db89359544 100644
--- a/drivers/iio/health/max30100.c
+++ b/drivers/iio/health/max30100.c
@@ -13,7 +13,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * TODO: allow LED current and pulse length controls via device tree properties
+ * TODO: enable pulse length controls via device tree properties
*/
#include <linux/module.h>
@@ -24,6 +24,7 @@
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
+#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
@@ -65,6 +66,7 @@
#define MAX30100_REG_SPO2_CONFIG_1600US 0x3
#define MAX30100_REG_LED_CONFIG 0x09
+#define MAX30100_REG_LED_CONFIG_LED_MASK 0x0f
#define MAX30100_REG_LED_CONFIG_RED_LED_SHIFT 4
#define MAX30100_REG_LED_CONFIG_24MA 0x07
@@ -111,6 +113,12 @@ static const struct regmap_config max30100_regmap_config = {
.volatile_reg = max30100_is_volatile_reg,
};
+static const unsigned int max30100_led_current_mapping[] = {
+ 4400, 7600, 11000, 14200, 17400,
+ 20800, 24000, 27100, 30600, 33800,
+ 37000, 40200, 43600, 46800, 50000
+};
+
static const unsigned long max30100_scan_masks[] = {0x3, 0};
static const struct iio_chan_spec max30100_channels[] = {
@@ -243,15 +251,76 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private)
return IRQ_HANDLED;
}
+static int max30100_get_current_idx(unsigned int val, int *reg)
+{
+ int idx;
+
+ /* LED turned off */
+ if (val == 0) {
+ *reg = 0;
+ return 0;
+ }
+
+ for (idx = 0; idx < ARRAY_SIZE(max30100_led_current_mapping); idx++) {
+ if (max30100_led_current_mapping[idx] == val) {
+ *reg = idx + 1;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int max30100_led_init(struct max30100_data *data)
+{
+ struct device *dev = &data->client->dev;
+ struct device_node *np = dev->of_node;
+ unsigned int val[2];
+ int reg, ret;
+
+ ret = of_property_read_u32_array(np, "maxim,led-current-microamp",
+ (unsigned int *) &val, 2);
+ if (ret) {
+ /* Default to 24 mA RED LED, 50 mA IR LED */
+ reg = (MAX30100_REG_LED_CONFIG_24MA <<
+ MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) |
+ MAX30100_REG_LED_CONFIG_50MA;
+ dev_warn(dev, "no led-current-microamp set");
+
+ return regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, reg);
+ }
+
+ /* RED LED current */
+ ret = max30100_get_current_idx(val[0], &reg);
+ if (ret) {
+ dev_err(dev, "invalid RED current setting %d", val[0]);
+ return ret;
+ }
+
+ ret = regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG,
+ MAX30100_REG_LED_CONFIG_LED_MASK <<
+ MAX30100_REG_LED_CONFIG_RED_LED_SHIFT,
+ reg << MAX30100_REG_LED_CONFIG_RED_LED_SHIFT);
+ if (ret)
+ return ret;
+
+ /* IR LED current */
+ ret = max30100_get_current_idx(val[1], &reg);
+ if (ret) {
+ dev_err(dev, "invalid IR current setting %d", val[1]);
+ return ret;
+ }
+
+ return regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG,
+ MAX30100_REG_LED_CONFIG_LED_MASK, reg);
+}
+
static int max30100_chip_init(struct max30100_data *data)
{
int ret;
- /* RED IR LED = 24mA, IR LED = 50mA */
- ret = regmap_write(data->regmap, MAX30100_REG_LED_CONFIG,
- (MAX30100_REG_LED_CONFIG_24MA <<
- MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) |
- MAX30100_REG_LED_CONFIG_50MA);
+ /* setup LED current settings */
+ ret = max30100_led_init(data);
if (ret)
return ret;
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 6a23698d347c..866dda133336 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -43,14 +43,16 @@ config SI7005
humidity and temperature sensor.
To compile this driver as a module, choose M here: the module
- will be called si7005.
+ will be called si7005. This driver also
+ supports Hoperf TH02 Humidity and Temperature Sensor.
config SI7020
tristate "Si7013/20/21 Relative Humidity and Temperature Sensors"
depends on I2C
help
Say yes here to build support for the Silicon Labs Si7013/20/21
- Relative Humidity and Temperature Sensors.
+ Relative Humidity and Temperature Sensors. This driver also
+ supports Hoperf TH06 Humidity and Temperature Sensor.
To compile this driver as a module, choose M here: the module
will be called si7020.
diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
index 1165b1c4f9d6..96185f8fad88 100644
--- a/drivers/iio/humidity/dht11.c
+++ b/drivers/iio/humidity/dht11.c
@@ -50,12 +50,32 @@
#define DHT11_EDGES_PER_READ (2 * DHT11_BITS_PER_READ + \
DHT11_EDGES_PREAMBLE + 1)
-/* Data transmission timing (nano seconds) */
+/*
+ * Data transmission timing:
+ * Data bits are encoded as pulse length (high time) on the data line.
+ * 0-bit: 22-30uS -- typically 26uS (AM2302)
+ * 1-bit: 68-75uS -- typically 70uS (AM2302)
+ * The acutal timings also depend on the properties of the cable, with
+ * longer cables typically making pulses shorter.
+ *
+ * Our decoding depends on the time resolution of the system:
+ * timeres > 34uS ... don't know what a 1-tick pulse is
+ * 34uS > timeres > 30uS ... no problem (30kHz and 32kHz clocks)
+ * 30uS > timeres > 23uS ... don't know what a 2-tick pulse is
+ * timeres < 23uS ... no problem
+ *
+ * Luckily clocks in the 33-44kHz range are quite uncommon, so we can
+ * support most systems if the threshold for decoding a pulse as 1-bit
+ * is chosen carefully. If somebody really wants to support clocks around
+ * 40kHz, where this driver is most unreliable, there are two options.
+ * a) select an implementation using busy loop polling on those systems
+ * b) use the checksum to do some probabilistic decoding
+ */
#define DHT11_START_TRANSMISSION 18 /* ms */
-#define DHT11_SENSOR_RESPONSE 80000
-#define DHT11_START_BIT 50000
-#define DHT11_DATA_BIT_LOW 27000
-#define DHT11_DATA_BIT_HIGH 70000
+#define DHT11_MIN_TIMERES 34000 /* ns */
+#define DHT11_THRESHOLD 49000 /* ns */
+#define DHT11_AMBIG_LOW 23000 /* ns */
+#define DHT11_AMBIG_HIGH 30000 /* ns */
struct dht11 {
struct device *dev;
@@ -76,43 +96,39 @@ struct dht11 {
struct {s64 ts; int value; } edges[DHT11_EDGES_PER_READ];
};
-static unsigned char dht11_decode_byte(int *timing, int threshold)
+static unsigned char dht11_decode_byte(char *bits)
{
unsigned char ret = 0;
int i;
for (i = 0; i < 8; ++i) {
ret <<= 1;
- if (timing[i] >= threshold)
+ if (bits[i])
++ret;
}
return ret;
}
-static int dht11_decode(struct dht11 *dht11, int offset, int timeres)
+static int dht11_decode(struct dht11 *dht11, int offset)
{
- int i, t, timing[DHT11_BITS_PER_READ], threshold;
+ int i, t;
+ char bits[DHT11_BITS_PER_READ];
unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum;
- threshold = DHT11_DATA_BIT_HIGH / timeres;
- if (DHT11_DATA_BIT_LOW / timeres + 1 >= threshold)
- pr_err("dht11: WARNING: decoding ambiguous\n");
-
- /* scale down with timeres and check validity */
for (i = 0; i < DHT11_BITS_PER_READ; ++i) {
t = dht11->edges[offset + 2 * i + 2].ts -
dht11->edges[offset + 2 * i + 1].ts;
if (!dht11->edges[offset + 2 * i + 1].value)
return -EIO; /* lost synchronisation */
- timing[i] = t / timeres;
+ bits[i] = t > DHT11_THRESHOLD;
}
- hum_int = dht11_decode_byte(timing, threshold);
- hum_dec = dht11_decode_byte(&timing[8], threshold);
- temp_int = dht11_decode_byte(&timing[16], threshold);
- temp_dec = dht11_decode_byte(&timing[24], threshold);
- checksum = dht11_decode_byte(&timing[32], threshold);
+ hum_int = dht11_decode_byte(bits);
+ hum_dec = dht11_decode_byte(&bits[8]);
+ temp_int = dht11_decode_byte(&bits[16]);
+ temp_dec = dht11_decode_byte(&bits[24]);
+ checksum = dht11_decode_byte(&bits[32]);
if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum)
return -EIO;
@@ -161,12 +177,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
int *val, int *val2, long m)
{
struct dht11 *dht11 = iio_priv(iio_dev);
- int ret, timeres;
+ int ret, timeres, offset;
mutex_lock(&dht11->lock);
if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_real_ns()) {
timeres = ktime_get_resolution_ns();
- if (DHT11_DATA_BIT_HIGH < 2 * timeres) {
+ if (timeres > DHT11_MIN_TIMERES) {
dev_err(dht11->dev, "timeresolution %dns too low\n",
timeres);
/* In theory a better clock could become available
@@ -176,6 +192,10 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
ret = -EAGAIN;
goto err;
}
+ if (timeres > DHT11_AMBIG_LOW && timeres < DHT11_AMBIG_HIGH)
+ dev_warn(dht11->dev,
+ "timeresolution: %dns - decoding ambiguous\n",
+ timeres);
reinit_completion(&dht11->completion);
@@ -208,11 +228,14 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
if (ret < 0)
goto err;
- ret = dht11_decode(dht11,
- dht11->num_edges == DHT11_EDGES_PER_READ ?
- DHT11_EDGES_PREAMBLE :
- DHT11_EDGES_PREAMBLE - 2,
- timeres);
+ offset = DHT11_EDGES_PREAMBLE +
+ dht11->num_edges - DHT11_EDGES_PER_READ;
+ for (; offset >= 0; --offset) {
+ ret = dht11_decode(dht11, offset);
+ if (!ret)
+ break;
+ }
+
if (ret)
goto err;
}
diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c
index 91972ccd8aaf..98a022fa26ad 100644
--- a/drivers/iio/humidity/si7005.c
+++ b/drivers/iio/humidity/si7005.c
@@ -170,6 +170,7 @@ static int si7005_probe(struct i2c_client *client,
static const struct i2c_device_id si7005_id[] = {
{ "si7005", 0 },
+ { "th02", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, si7005_id);
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index 71991b5c0658..5ab4e06fb544 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -149,6 +149,7 @@ static int si7020_probe(struct i2c_client *client,
static const struct i2c_device_id si7020_id[] = {
{ "si7020", 0 },
+ { "th06", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, si7020_id);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index f0e06093b5e8..0852b7fa777e 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -727,8 +727,7 @@ static const struct iio_info mpu_info = {
/**
* inv_check_and_setup_chip() - check and setup chip.
*/
-static int inv_check_and_setup_chip(struct inv_mpu6050_state *st,
- const struct i2c_device_id *id)
+static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)
{
int result;
@@ -795,7 +794,7 @@ static int inv_mpu_probe(struct i2c_client *client,
if (pdata)
st->plat_data = *pdata;
/* power is turned on inside check chip type*/
- result = inv_check_and_setup_chip(st, id);
+ result = inv_check_and_setup_chip(st);
if (result)
return result;
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index af7cc1e65656..70cb7eb0a75c 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -77,6 +77,7 @@ static const char * const iio_chan_type_name_spec[] = {
[IIO_VELOCITY] = "velocity",
[IIO_CONCENTRATION] = "concentration",
[IIO_RESISTANCE] = "resistance",
+ [IIO_PH] = "ph",
};
static const char * const iio_modifier_names[] = {
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 01e111e72d4b..b776c8ed4387 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -65,19 +65,25 @@
#define OPT3001_REG_EXPONENT(n) ((n) >> 12)
#define OPT3001_REG_MANTISSA(n) ((n) & 0xfff)
+#define OPT3001_INT_TIME_LONG 800000
+#define OPT3001_INT_TIME_SHORT 100000
+
/*
* Time to wait for conversion result to be ready. The device datasheet
- * worst-case max value is 880ms. Add some slack to be on the safe side.
+ * sect. 6.5 states results are ready after total integration time plus 3ms.
+ * This results in worst-case max values of 113ms or 883ms, respectively.
+ * Add some slack to be on the safe side.
*/
-#define OPT3001_RESULT_READY_TIMEOUT msecs_to_jiffies(1000)
+#define OPT3001_RESULT_READY_SHORT 150
+#define OPT3001_RESULT_READY_LONG 1000
struct opt3001 {
struct i2c_client *client;
struct device *dev;
struct mutex lock;
- u16 ok_to_ignore_lock:1;
- u16 result_ready:1;
+ bool ok_to_ignore_lock;
+ bool result_ready;
wait_queue_head_t result_ready_queue;
u16 result;
@@ -89,6 +95,8 @@ struct opt3001 {
u8 high_thresh_exp;
u8 low_thresh_exp;
+
+ bool use_irq;
};
struct opt3001_scale {
@@ -227,26 +235,30 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
u16 reg;
u8 exponent;
u16 value;
+ long timeout;
- /*
- * Enable the end-of-conversion interrupt mechanism. Note that doing
- * so will overwrite the low-level limit value however we will restore
- * this value later on.
- */
- ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT,
- OPT3001_LOW_LIMIT_EOC_ENABLE);
- if (ret < 0) {
- dev_err(opt->dev, "failed to write register %02x\n",
- OPT3001_LOW_LIMIT);
- return ret;
+ if (opt->use_irq) {
+ /*
+ * Enable the end-of-conversion interrupt mechanism. Note that
+ * doing so will overwrite the low-level limit value however we
+ * will restore this value later on.
+ */
+ ret = i2c_smbus_write_word_swapped(opt->client,
+ OPT3001_LOW_LIMIT,
+ OPT3001_LOW_LIMIT_EOC_ENABLE);
+ if (ret < 0) {
+ dev_err(opt->dev, "failed to write register %02x\n",
+ OPT3001_LOW_LIMIT);
+ return ret;
+ }
+
+ /* Allow IRQ to access the device despite lock being set */
+ opt->ok_to_ignore_lock = true;
}
- /* Reset data-ready indicator flag (will be set in the IRQ routine) */
+ /* Reset data-ready indicator flag */
opt->result_ready = false;
- /* Allow IRQ to access the device despite lock being set */
- opt->ok_to_ignore_lock = true;
-
/* Configure for single-conversion mode and start a new conversion */
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
if (ret < 0) {
@@ -266,32 +278,69 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
goto err;
}
- /* Wait for the IRQ to indicate the conversion is complete */
- ret = wait_event_timeout(opt->result_ready_queue, opt->result_ready,
- OPT3001_RESULT_READY_TIMEOUT);
+ if (opt->use_irq) {
+ /* Wait for the IRQ to indicate the conversion is complete */
+ ret = wait_event_timeout(opt->result_ready_queue,
+ opt->result_ready,
+ msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
+ } else {
+ /* Sleep for result ready time */
+ timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ?
+ OPT3001_RESULT_READY_SHORT : OPT3001_RESULT_READY_LONG;
+ msleep(timeout);
+
+ /* Check result ready flag */
+ ret = i2c_smbus_read_word_swapped(opt->client,
+ OPT3001_CONFIGURATION);
+ if (ret < 0) {
+ dev_err(opt->dev, "failed to read register %02x\n",
+ OPT3001_CONFIGURATION);
+ goto err;
+ }
+
+ if (!(ret & OPT3001_CONFIGURATION_CRF)) {
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ /* Obtain value */
+ ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT);
+ if (ret < 0) {
+ dev_err(opt->dev, "failed to read register %02x\n",
+ OPT3001_RESULT);
+ goto err;
+ }
+ opt->result = ret;
+ opt->result_ready = true;
+ }
err:
- /* Disallow IRQ to access the device while lock is active */
- opt->ok_to_ignore_lock = false;
+ if (opt->use_irq)
+ /* Disallow IRQ to access the device while lock is active */
+ opt->ok_to_ignore_lock = false;
if (ret == 0)
return -ETIMEDOUT;
else if (ret < 0)
return ret;
- /*
- * Disable the end-of-conversion interrupt mechanism by restoring the
- * low-level limit value (clearing OPT3001_LOW_LIMIT_EOC_ENABLE). Note
- * that selectively clearing those enable bits would affect the actual
- * limit value due to bit-overlap and therefore can't be done.
- */
- value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa;
- ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT,
- value);
- if (ret < 0) {
- dev_err(opt->dev, "failed to write register %02x\n",
- OPT3001_LOW_LIMIT);
- return ret;
+ if (opt->use_irq) {
+ /*
+ * Disable the end-of-conversion interrupt mechanism by
+ * restoring the low-level limit value (clearing
+ * OPT3001_LOW_LIMIT_EOC_ENABLE). Note that selectively clearing
+ * those enable bits would affect the actual limit value due to
+ * bit-overlap and therefore can't be done.
+ */
+ value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa;
+ ret = i2c_smbus_write_word_swapped(opt->client,
+ OPT3001_LOW_LIMIT,
+ value);
+ if (ret < 0) {
+ dev_err(opt->dev, "failed to write register %02x\n",
+ OPT3001_LOW_LIMIT);
+ return ret;
+ }
}
exponent = OPT3001_REG_EXPONENT(opt->result);
@@ -325,13 +374,13 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time)
reg = ret;
switch (time) {
- case 100000:
+ case OPT3001_INT_TIME_SHORT:
reg &= ~OPT3001_CONFIGURATION_CT;
- opt->int_time = 100000;
+ opt->int_time = OPT3001_INT_TIME_SHORT;
break;
- case 800000:
+ case OPT3001_INT_TIME_LONG:
reg |= OPT3001_CONFIGURATION_CT;
- opt->int_time = 800000;
+ opt->int_time = OPT3001_INT_TIME_LONG;
break;
default:
return -EINVAL;
@@ -597,9 +646,9 @@ static int opt3001_configure(struct opt3001 *opt)
/* Reflect status of the device's integration time setting */
if (reg & OPT3001_CONFIGURATION_CT)
- opt->int_time = 800000;
+ opt->int_time = OPT3001_INT_TIME_LONG;
else
- opt->int_time = 100000;
+ opt->int_time = OPT3001_INT_TIME_SHORT;
/* Ensure device is in shutdown initially */
opt3001_set_mode(opt, &reg, OPT3001_CONFIGURATION_M_SHUTDOWN);
@@ -733,12 +782,18 @@ static int opt3001_probe(struct i2c_client *client,
return ret;
}
- ret = request_threaded_irq(irq, NULL, opt3001_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- "opt3001", iio);
- if (ret) {
- dev_err(dev, "failed to request IRQ #%d\n", irq);
- return ret;
+ /* Make use of INT pin only if valid IRQ no. is given */
+ if (irq > 0) {
+ ret = request_threaded_irq(irq, NULL, opt3001_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "opt3001", iio);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ #%d\n", irq);
+ return ret;
+ }
+ opt->use_irq = true;
+ } else {
+ dev_dbg(opt->dev, "enabling interrupt-less operation\n");
}
return 0;
@@ -751,7 +806,8 @@ static int opt3001_remove(struct i2c_client *client)
int ret;
u16 reg;
- free_irq(client->irq, iio);
+ if (opt->use_irq)
+ free_irq(client->irq, iio);
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
if (ret < 0) {
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index b13936dacc78..9c5c9ef3f1da 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -252,7 +252,7 @@ struct ak_def {
u8 data_regs[3];
};
-static struct ak_def ak_def_array[AK_MAX_TYPE] = {
+static const struct ak_def ak_def_array[AK_MAX_TYPE] = {
{
.type = AK8975,
.raw_to_gauss = ak8975_raw_to_gauss,
@@ -360,7 +360,7 @@ static struct ak_def ak_def_array[AK_MAX_TYPE] = {
*/
struct ak8975_data {
struct i2c_client *client;
- struct ak_def *def;
+ const struct ak_def *def;
struct attribute_group attrs;
struct mutex lock;
u8 asa[3];
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index b27f0146647b..501f858df413 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -175,6 +175,8 @@
#define ST_MAGN_3_BDU_MASK 0x10
#define ST_MAGN_3_DRDY_IRQ_ADDR 0x62
#define ST_MAGN_3_DRDY_INT_MASK 0x01
+#define ST_MAGN_3_IHL_IRQ_ADDR 0x63
+#define ST_MAGN_3_IHL_IRQ_MASK 0x04
#define ST_MAGN_3_FS_AVL_15000_GAIN 1500
#define ST_MAGN_3_MULTIREAD_BIT false
#define ST_MAGN_3_OUT_X_L_ADDR 0x68
@@ -480,6 +482,8 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
.drdy_irq = {
.addr = ST_MAGN_3_DRDY_IRQ_ADDR,
.mask_int1 = ST_MAGN_3_DRDY_INT_MASK,
+ .addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR,
+ .mask_ihl = ST_MAGN_3_IHL_IRQ_MASK,
},
.multi_read_bit = ST_MAGN_3_MULTIREAD_BIT,
.bootime = 2,
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 6f2e7c9ac23e..cf03a43545a1 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -10,11 +10,11 @@ config BMP280
depends on I2C
select REGMAP_I2C
help
- Say yes here to build support for Bosch Sensortec BMP280
- pressure and temperature sensor.
+ Say yes here to build support for Bosch Sensortec BMP280
+ pressure and temperature sensor.
- To compile this driver as a module, choose M here: the module
- will be called bmp280.
+ To compile this driver as a module, choose M here: the module
+ will be called bmp280.
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
@@ -27,18 +27,33 @@ config HID_SENSOR_PRESS
Say yes here to build support for the HID SENSOR
Pressure driver
- To compile this driver as a module, choose M here: the module
- will be called hid-sensor-press.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-sensor-press.
config MPL115
+ tristate
+
+config MPL115_I2C
tristate "Freescale MPL115A2 pressure sensor driver"
depends on I2C
+ select MPL115
help
Say yes here to build support for the Freescale MPL115A2
pressure sensor connected via I2C.
- To compile this driver as a module, choose M here: the module
- will be called mpl115.
+ To compile this driver as a module, choose M here: the module
+ will be called mpl115_i2c.
+
+config MPL115_SPI
+ tristate "Freescale MPL115A1 pressure sensor driver"
+ depends on SPI_MASTER
+ select MPL115
+ help
+ Say yes here to build support for the Freescale MPL115A1
+ pressure sensor connected via SPI.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mpl115_spi.
config MPL3115
tristate "Freescale MPL3115A2 pressure sensor driver"
@@ -49,8 +64,8 @@ config MPL3115
Say yes here to build support for the Freescale MPL3115A2
pressure sensor / altimeter.
- To compile this driver as a module, choose M here: the module
- will be called mpl3115.
+ To compile this driver as a module, choose M here: the module
+ will be called mpl3115.
config MS5611
tristate "Measurement Specialties MS5611 pressure sensor driver"
@@ -82,7 +97,7 @@ config MS5611_SPI
config MS5637
tristate "Measurement Specialties MS5637 pressure & temperature sensor"
depends on I2C
- select IIO_MS_SENSORS_I2C
+ select IIO_MS_SENSORS_I2C
help
If you say yes here you get support for the Measurement Specialties
MS5637 pressure and temperature sensor.
@@ -128,7 +143,7 @@ config T5403
Say yes here to build support for the EPCOS T5403 pressure sensor
connected via I2C.
- To compile this driver as a module, choose M here: the module
- will be called t5403.
+ To compile this driver as a module, choose M here: the module
+ will be called t5403.
endmenu
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index 46571c96823f..d336af14f3fe 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -6,6 +6,8 @@
obj-$(CONFIG_BMP280) += bmp280.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
obj-$(CONFIG_MPL115) += mpl115.o
+obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o
+obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
obj-$(CONFIG_MPL3115) += mpl3115.o
obj-$(CONFIG_MS5611) += ms5611_core.o
obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o
diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c
index f5ecd6e19f5d..138344ca3ffd 100644
--- a/drivers/iio/pressure/mpl115.c
+++ b/drivers/iio/pressure/mpl115.c
@@ -1,5 +1,5 @@
/*
- * mpl115.c - Support for Freescale MPL115A2 pressure/temperature sensor
+ * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor
*
* Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
*
@@ -7,17 +7,16 @@
* the GNU General Public License. See the file COPYING in the main
* directory of this archive for more details.
*
- * (7-bit I2C slave address 0x60)
- *
* TODO: shutdown pin
*
*/
#include <linux/module.h>
-#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/delay.h>
+#include "mpl115.h"
+
#define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */
#define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */
#define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */
@@ -27,16 +26,18 @@
#define MPL115_CONVERT 0x12 /* convert temperature and pressure */
struct mpl115_data {
- struct i2c_client *client;
+ struct device *dev;
struct mutex lock;
s16 a0;
s16 b1, b2;
s16 c12;
+ const struct mpl115_ops *ops;
};
static int mpl115_request(struct mpl115_data *data)
{
- int ret = i2c_smbus_write_byte_data(data->client, MPL115_CONVERT, 0);
+ int ret = data->ops->write(data->dev, MPL115_CONVERT, 0);
+
if (ret < 0)
return ret;
@@ -57,12 +58,12 @@ static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2)
if (ret < 0)
goto done;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_PADC);
+ ret = data->ops->read(data->dev, MPL115_PADC);
if (ret < 0)
goto done;
padc = ret >> 6;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC);
+ ret = data->ops->read(data->dev, MPL115_TADC);
if (ret < 0)
goto done;
tadc = ret >> 6;
@@ -90,7 +91,7 @@ static int mpl115_read_temp(struct mpl115_data *data)
ret = mpl115_request(data);
if (ret < 0)
goto done;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC);
+ ret = data->ops->read(data->dev, MPL115_TADC);
done:
mutex_unlock(&data->lock);
return ret;
@@ -145,66 +146,53 @@ static const struct iio_info mpl115_info = {
.driver_module = THIS_MODULE,
};
-static int mpl115_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+int mpl115_probe(struct device *dev, const char *name,
+ const struct mpl115_ops *ops)
{
struct mpl115_data *data;
struct iio_dev *indio_dev;
int ret;
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return -ENODEV;
-
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
- data->client = client;
+ data->dev = dev;
+ data->ops = ops;
mutex_init(&data->lock);
- i2c_set_clientdata(client, indio_dev);
indio_dev->info = &mpl115_info;
- indio_dev->name = id->name;
- indio_dev->dev.parent = &client->dev;
+ indio_dev->name = name;
+ indio_dev->dev.parent = dev;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = mpl115_channels;
indio_dev->num_channels = ARRAY_SIZE(mpl115_channels);
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_A0);
+ ret = data->ops->init(data->dev);
+ if (ret)
+ return ret;
+
+ ret = data->ops->read(data->dev, MPL115_A0);
if (ret < 0)
return ret;
data->a0 = ret;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_B1);
+ ret = data->ops->read(data->dev, MPL115_B1);
if (ret < 0)
return ret;
data->b1 = ret;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_B2);
+ ret = data->ops->read(data->dev, MPL115_B2);
if (ret < 0)
return ret;
data->b2 = ret;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_C12);
+ ret = data->ops->read(data->dev, MPL115_C12);
if (ret < 0)
return ret;
data->c12 = ret;
- return devm_iio_device_register(&client->dev, indio_dev);
+ return devm_iio_device_register(dev, indio_dev);
}
-
-static const struct i2c_device_id mpl115_id[] = {
- { "mpl115", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, mpl115_id);
-
-static struct i2c_driver mpl115_driver = {
- .driver = {
- .name = "mpl115",
- },
- .probe = mpl115_probe,
- .id_table = mpl115_id,
-};
-module_i2c_driver(mpl115_driver);
+EXPORT_SYMBOL_GPL(mpl115_probe);
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver");
diff --git a/drivers/iio/pressure/mpl115.h b/drivers/iio/pressure/mpl115.h
new file mode 100644
index 000000000000..01b652774dc3
--- /dev/null
+++ b/drivers/iio/pressure/mpl115.h
@@ -0,0 +1,24 @@
+/*
+ * Freescale MPL115A pressure/temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ */
+
+#ifndef _MPL115_H_
+#define _MPL115_H_
+
+struct mpl115_ops {
+ int (*init)(struct device *);
+ int (*read)(struct device *, u8);
+ int (*write)(struct device *, u8, u8);
+};
+
+int mpl115_probe(struct device *dev, const char *name,
+ const struct mpl115_ops *ops);
+
+#endif
diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c
new file mode 100644
index 000000000000..9ea055c3f89e
--- /dev/null
+++ b/drivers/iio/pressure/mpl115_i2c.c
@@ -0,0 +1,67 @@
+/*
+ * Freescale MPL115A2 pressure/temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x60)
+ *
+ * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#include "mpl115.h"
+
+static int mpl115_i2c_init(struct device *dev)
+{
+ return 0;
+}
+
+static int mpl115_i2c_read(struct device *dev, u8 address)
+{
+ return i2c_smbus_read_word_swapped(to_i2c_client(dev), address);
+}
+
+static int mpl115_i2c_write(struct device *dev, u8 address, u8 value)
+{
+ return i2c_smbus_write_byte_data(to_i2c_client(dev), address, value);
+}
+
+static const struct mpl115_ops mpl115_i2c_ops = {
+ .init = mpl115_i2c_init,
+ .read = mpl115_i2c_read,
+ .write = mpl115_i2c_write,
+};
+
+static int mpl115_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops);
+}
+
+static const struct i2c_device_id mpl115_i2c_id[] = {
+ { "mpl115", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mpl115_i2c_id);
+
+static struct i2c_driver mpl115_i2c_driver = {
+ .driver = {
+ .name = "mpl115",
+ },
+ .probe = mpl115_i2c_probe,
+ .id_table = mpl115_i2c_id,
+};
+module_i2c_driver(mpl115_i2c_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Freescale MPL115A2 pressure/temperature driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/pressure/mpl115_spi.c b/drivers/iio/pressure/mpl115_spi.c
new file mode 100644
index 000000000000..9ebf55f5b3aa
--- /dev/null
+++ b/drivers/iio/pressure/mpl115_spi.c
@@ -0,0 +1,106 @@
+/*
+ * Freescale MPL115A1 pressure/temperature sensor
+ *
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A1.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "mpl115.h"
+
+#define MPL115_SPI_WRITE(address) ((address) << 1)
+#define MPL115_SPI_READ(address) (0x80 | (address) << 1)
+
+struct mpl115_spi_buf {
+ u8 tx[4];
+ u8 rx[4];
+};
+
+static int mpl115_spi_init(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct mpl115_spi_buf *buf;
+
+ buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, buf);
+
+ return 0;
+}
+
+static int mpl115_spi_read(struct device *dev, u8 address)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct mpl115_spi_buf *buf = spi_get_drvdata(spi);
+ struct spi_transfer xfer = {
+ .tx_buf = buf->tx,
+ .rx_buf = buf->rx,
+ .len = 4,
+ };
+ int ret;
+
+ buf->tx[0] = MPL115_SPI_READ(address);
+ buf->tx[2] = MPL115_SPI_READ(address + 1);
+
+ ret = spi_sync_transfer(spi, &xfer, 1);
+ if (ret)
+ return ret;
+
+ return (buf->rx[1] << 8) | buf->rx[3];
+}
+
+static int mpl115_spi_write(struct device *dev, u8 address, u8 value)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct mpl115_spi_buf *buf = spi_get_drvdata(spi);
+ struct spi_transfer xfer = {
+ .tx_buf = buf->tx,
+ .len = 2,
+ };
+
+ buf->tx[0] = MPL115_SPI_WRITE(address);
+ buf->tx[1] = value;
+
+ return spi_sync_transfer(spi, &xfer, 1);
+}
+
+static const struct mpl115_ops mpl115_spi_ops = {
+ .init = mpl115_spi_init,
+ .read = mpl115_spi_read,
+ .write = mpl115_spi_write,
+};
+
+static int mpl115_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+
+ return mpl115_probe(&spi->dev, id->name, &mpl115_spi_ops);
+}
+
+static const struct spi_device_id mpl115_spi_ids[] = {
+ { "mpl115", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, mpl115_spi_ids);
+
+static struct spi_driver mpl115_spi_driver = {
+ .driver = {
+ .name = "mpl115",
+ },
+ .probe = mpl115_spi_probe,
+ .id_table = mpl115_spi_ids,
+};
+module_spi_driver(mpl115_spi_driver);
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_DESCRIPTION("Freescale MPL115A1 pressure/temperature driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index b39a2fb0671c..172393ad34af 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -62,6 +62,8 @@
#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20
+#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22
+#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS331AP_MULTIREAD_BIT true
#define ST_PRESS_LPS331AP_TEMP_OFFSET 42500
@@ -100,6 +102,8 @@
#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23
#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01
#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10
+#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22
+#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS25H_MULTIREAD_BIT true
#define ST_PRESS_LPS25H_TEMP_OFFSET 42500
#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28
@@ -220,6 +224,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
+ .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
},
.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
.bootime = 2,
@@ -304,6 +310,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
+ .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
},
.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
.bootime = 2,
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
index 17e5c9c515d4..7c7cd8456060 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
@@ -1,31 +1,3 @@
-
-What: /sys/bus/iio/devices/device[n]/range
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware dependent ADC Full Scale Range used for some ambient
- light sensors in calculating lux.
-
-What: /sys/bus/iio/devices/device[n]/range_available
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware dependent supported vales for ADC Full Scale Range.
-
-What: /sys/bus/iio/devices/device[n]/adc_resolution
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware dependent ADC resolution of the ambient light sensor
- used in calculating the lux.
-
-What: /sys/bus/iio/devices/device[n]/adc_resolution_available
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware dependent list of possible values supported for the
- adc_resolution of the given sensor.
-
What: /sys/bus/iio/devices/device[n]/in_illuminance0[_input|_raw]
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 92211039ffa9..92f2b72cce30 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -236,7 +236,7 @@ static int ad7192_setup(struct ad7192_state *st,
st->mclk = pdata->ext_clk_hz;
else
st->mclk = AD7192_INT_FREQ_MHZ;
- break;
+ break;
default:
ret = -EINVAL;
goto out;
diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
index e8d0ff2d5c9b..f6b9a10326ea 100644
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -21,8 +21,8 @@
*/
#define AD7150_STATUS 0
-#define AD7150_STATUS_OUT1 (1 << 3)
-#define AD7150_STATUS_OUT2 (1 << 5)
+#define AD7150_STATUS_OUT1 BIT(3)
+#define AD7150_STATUS_OUT2 BIT(5)
#define AD7150_CH1_DATA_HIGH 1
#define AD7150_CH2_DATA_HIGH 3
#define AD7150_CH1_AVG_HIGH 5
@@ -36,7 +36,7 @@
#define AD7150_CH2_TIMEOUT 13
#define AD7150_CH2_SETUP 14
#define AD7150_CFG 15
-#define AD7150_CFG_FIX (1 << 7)
+#define AD7150_CFG_FIX BIT(7)
#define AD7150_PD_TIMER 16
#define AD7150_CH1_CAPDAC 17
#define AD7150_CH2_CAPDAC 18
@@ -160,8 +160,9 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
/* lock should be held */
static int ad7150_write_event_params(struct iio_dev *indio_dev,
- unsigned int chan, enum iio_event_type type,
- enum iio_event_direction dir)
+ unsigned int chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
{
int ret;
u16 value;
@@ -209,8 +210,9 @@ static int ad7150_write_event_params(struct iio_dev *indio_dev,
}
static int ad7150_write_event_config(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan, enum iio_event_type type,
- enum iio_event_direction dir, int state)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir, int state)
{
u8 thresh_type, cfg, adaptive;
int ret;
@@ -302,11 +304,11 @@ static int ad7150_read_event_value(struct iio_dev *indio_dev,
}
static int ad7150_write_event_value(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan,
- enum iio_event_type type,
- enum iio_event_direction dir,
- enum iio_event_info info,
- int val, int val2)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
{
int ret;
struct ad7150_chip_info *chip = iio_priv(indio_dev);
@@ -365,9 +367,9 @@ static ssize_t ad7150_show_timeout(struct device *dev,
}
static ssize_t ad7150_store_timeout(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad7150_chip_info *chip = iio_priv(indio_dev);
@@ -580,7 +582,7 @@ static const struct iio_info ad7150_info = {
*/
static int ad7150_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
int ret;
struct ad7150_chip_info *chip;
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 2fe939c73cd2..6670c3d25c58 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -119,6 +119,8 @@ struct st_sensor_bdu {
* @addr: address of the register.
* @mask_int1: mask to enable/disable IRQ on INT1 pin.
* @mask_int2: mask to enable/disable IRQ on INT2 pin.
+ * @addr_ihl: address to enable/disable active low on the INT lines.
+ * @mask_ihl: mask to enable/disable active low on the INT lines.
* struct ig1 - represents the Interrupt Generator 1 of sensors.
* @en_addr: address of the enable ig1 register.
* @en_mask: mask to write the on/off value for enable.
@@ -127,6 +129,8 @@ struct st_sensor_data_ready_irq {
u8 addr;
u8 mask_int1;
u8 mask_int2;
+ u8 addr_ihl;
+ u8 mask_ihl;
struct {
u8 en_addr;
u8 en_mask;
diff --git a/include/linux/platform_data/ad5761.h b/include/linux/platform_data/ad5761.h
new file mode 100644
index 000000000000..7bd8ed7d978e
--- /dev/null
+++ b/include/linux/platform_data/ad5761.h
@@ -0,0 +1,44 @@
+/*
+ * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter
+ *
+ * Copyright 2016 Qtechnology A/S
+ * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ *
+ * Licensed under the GPL-2.
+ */
+#ifndef __LINUX_PLATFORM_DATA_AD5761_H__
+#define __LINUX_PLATFORM_DATA_AD5761_H__
+
+/**
+ * enum ad5761_voltage_range - Voltage range the AD5761 is configured for.
+ * @AD5761_VOLTAGE_RANGE_M10V_10V: -10V to 10V
+ * @AD5761_VOLTAGE_RANGE_0V_10V: 0V to 10V
+ * @AD5761_VOLTAGE_RANGE_M5V_5V: -5V to 5V
+ * @AD5761_VOLTAGE_RANGE_0V_5V: 0V to 5V
+ * @AD5761_VOLTAGE_RANGE_M2V5_7V5: -2.5V to 7.5V
+ * @AD5761_VOLTAGE_RANGE_M3V_3V: -3V to 3V
+ * @AD5761_VOLTAGE_RANGE_0V_16V: 0V to 16V
+ * @AD5761_VOLTAGE_RANGE_0V_20V: 0V to 20V
+ */
+
+enum ad5761_voltage_range {
+ AD5761_VOLTAGE_RANGE_M10V_10V,
+ AD5761_VOLTAGE_RANGE_0V_10V,
+ AD5761_VOLTAGE_RANGE_M5V_5V,
+ AD5761_VOLTAGE_RANGE_0V_5V,
+ AD5761_VOLTAGE_RANGE_M2V5_7V5,
+ AD5761_VOLTAGE_RANGE_M3V_3V,
+ AD5761_VOLTAGE_RANGE_0V_16V,
+ AD5761_VOLTAGE_RANGE_0V_20V,
+};
+
+/**
+ * struct ad5761_platform_data - AD5761 DAC driver platform data
+ * @voltage_range: Voltage range the AD5761 is configured for
+ */
+
+struct ad5761_platform_data {
+ enum ad5761_voltage_range voltage_range;
+};
+
+#endif
diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h
index 7c63bd67c36e..c077617f3304 100644
--- a/include/uapi/linux/iio/types.h
+++ b/include/uapi/linux/iio/types.h
@@ -37,6 +37,7 @@ enum iio_chan_type {
IIO_VELOCITY,
IIO_CONCENTRATION,
IIO_RESISTANCE,
+ IIO_PH,
};
enum iio_modifier {