summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt19
-rw-r--r--Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt63
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/cpufreq/Kconfig.arm88
-rw-r--r--drivers/cpufreq/Makefile9
-rw-r--r--drivers/cpufreq/armada-37xx-cpufreq.c241
-rw-r--r--drivers/cpufreq/cpufreq-dt-platdev.c8
-rw-r--r--drivers/cpufreq/cpufreq.c55
-rw-r--r--drivers/cpufreq/longhaul.c2
-rw-r--r--drivers/cpufreq/mediatek-cpufreq.c1
-rw-r--r--drivers/cpufreq/mvebu-cpufreq.c16
-rw-r--r--drivers/cpufreq/ti-cpufreq.c51
-rw-r--r--drivers/opp/Makefile1
-rw-r--r--drivers/opp/ti-opp-supply.c425
14 files changed, 896 insertions, 84 deletions
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
index 51336e5fc761..35c3c3460d17 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
@@ -14,3 +14,22 @@ following property before the previous one:
Example:
compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
+
+
+Power management
+----------------
+
+For power management (particularly DVFS and AVS), the North Bridge
+Power Management component is needed:
+
+Required properties:
+- compatible : should contain "marvell,armada-3700-nb-pm", "syscon";
+- reg : the register start and length for the North Bridge
+ Power Management
+
+Example:
+
+nb_pm: syscon@14000 {
+ compatible = "marvell,armada-3700-nb-pm", "syscon";
+ reg = <0x14000 0x60>;
+}
diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
new file mode 100644
index 000000000000..832346e489a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
@@ -0,0 +1,63 @@
+Texas Instruments OMAP compatible OPP supply description
+
+OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which
+contain data that can be used to adjust voltages programmed for some of their
+supplies for more efficient operation. This binding provides the information
+needed to read these values and use them to program the main regulator during
+an OPP transitions.
+
+Also, some supplies may have an associated vbb-supply which is an Adaptive Body
+Bias regulator which much be transitioned in a specific sequence with regards
+to the vdd-supply and clk when making an OPP transition. By supplying two
+regulators to the device that will undergo OPP transitions we can make use
+of the multi regulator binding that is part of the OPP core described here [1]
+to describe both regulators needed by the platform.
+
+[1] Documentation/devicetree/bindings/opp/opp.txt
+
+Required Properties for Device Node:
+- vdd-supply: phandle to regulator controlling VDD supply
+- vbb-supply: phandle to regulator controlling Body Bias supply
+ (Usually Adaptive Body Bias regulator)
+
+Required Properties for opp-supply node:
+- compatible: Should be one of:
+ "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB
+ "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD
+ along with VBB
+ "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD
+ but no VBB.
+- reg: Address and length of the efuse register set for the device (mandatory
+ only for "ti,omap5-opp-supply")
+- ti,efuse-settings: An array of u32 tuple items providing information about
+ optimized efuse configuration. Each item consists of the following:
+ volt: voltage in uV - reference voltage (OPP voltage)
+ efuse_offseet: efuse offset from reg where the optimized voltage is stored.
+- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply.
+
+Example:
+
+/* Device Node (CPU) */
+cpus {
+ cpu0: cpu@0 {
+ device_type = "cpu";
+
+ ...
+
+ vdd-supply = <&vcc>;
+ vbb-supply = <&abb_mpu>;
+ };
+};
+
+/* OMAP OPP Supply with Class0 registers */
+opp_supply_mpu: opp_supply@4a003b20 {
+ compatible = "ti,omap5-opp-supply";
+ reg = <0x4a003b20 0x8>;
+ ti,efuse-settings = <
+ /* uV offset */
+ 1060000 0x0
+ 1160000 0x4
+ 1210000 0x8
+ >;
+ ti,absolute-max-voltage-uv = <1500000>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index a6e86e20761e..eee18d59278f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1583,6 +1583,7 @@ F: arch/arm/boot/dts/kirkwood*
F: arch/arm/configs/mvebu_*_defconfig
F: arch/arm/mach-mvebu/
F: arch/arm64/boot/dts/marvell/armada*
+F: drivers/cpufreq/armada-37xx-cpufreq.c
F: drivers/cpufreq/mvebu-cpufreq.c
F: drivers/irqchip/irq-armada-370-xp.c
F: drivers/irqchip/irq-mvebu-*
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index bdce4488ded1..3a88e33b0cfe 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,29 @@
# ARM CPU Frequency scaling drivers
#
+config ACPI_CPPC_CPUFREQ
+ tristate "CPUFreq driver based on the ACPI CPPC spec"
+ depends on ACPI_PROCESSOR
+ select ACPI_CPPC_LIB
+ help
+ This adds a CPUFreq driver which uses CPPC methods
+ as described in the ACPIv5.1 spec. CPPC stands for
+ Collaborative Processor Performance Controls. It
+ is based on an abstract continuous scale of CPU
+ performance values which allows the remote power
+ processor to flexibly optimize for power and
+ performance. CPPC relies on power management firmware
+ support for its operation.
+
+ If in doubt, say N.
+
+config ARM_ARMADA_37XX_CPUFREQ
+ tristate "Armada 37xx CPUFreq support"
+ depends on ARCH_MVEBU
+ help
+ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
+ The Armada 37xx PMU supports 4 frequency and VDD levels.
+
# big LITTLE core layer and glue drivers
config ARM_BIG_LITTLE_CPUFREQ
tristate "Generic ARM big LITTLE CPUfreq driver"
@@ -12,6 +35,30 @@ config ARM_BIG_LITTLE_CPUFREQ
help
This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
+config ARM_DT_BL_CPUFREQ
+ tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && OF
+ help
+ This enables probing via DT for Generic CPUfreq driver for ARM
+ big.LITTLE platform. This gets frequency tables from DT.
+
+config ARM_SCPI_CPUFREQ
+ tristate "SCPI based CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
+ help
+ This adds the CPUfreq driver support for ARM big.LITTLE platforms
+ using SCPI protocol for CPU power management.
+
+ This driver uses SCPI Message Protocol driver to interact with the
+ firmware providing the CPU DVFS functionality.
+
+config ARM_VEXPRESS_SPC_CPUFREQ
+ tristate "Versatile Express SPC based CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
+ help
+ This add the CPUfreq driver support for Versatile Express
+ big.LITTLE platforms using SPC for power management.
+
config ARM_BRCMSTB_AVS_CPUFREQ
tristate "Broadcom STB AVS CPUfreq driver"
depends on ARCH_BRCMSTB || COMPILE_TEST
@@ -33,20 +80,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
If in doubt, say N.
-config ARM_DT_BL_CPUFREQ
- tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
- depends on ARM_BIG_LITTLE_CPUFREQ && OF
- help
- This enables probing via DT for Generic CPUfreq driver for ARM
- big.LITTLE platform. This gets frequency tables from DT.
-
-config ARM_VEXPRESS_SPC_CPUFREQ
- tristate "Versatile Express SPC based CPUfreq driver"
- depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
- help
- This add the CPUfreq driver support for Versatile Express
- big.LITTLE platforms using SPC for power management.
-
config ARM_EXYNOS5440_CPUFREQ
tristate "SAMSUNG EXYNOS5440"
depends on SOC_EXYNOS5440
@@ -205,16 +238,6 @@ config ARM_SA1100_CPUFREQ
config ARM_SA1110_CPUFREQ
bool
-config ARM_SCPI_CPUFREQ
- tristate "SCPI based CPUfreq driver"
- depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
- help
- This adds the CPUfreq driver support for ARM big.LITTLE platforms
- using SCPI protocol for CPU power management.
-
- This driver uses SCPI Message Protocol driver to interact with the
- firmware providing the CPU DVFS functionality.
-
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
@@ -275,20 +298,3 @@ config ARM_PXA2xx_CPUFREQ
This add the CPUFreq driver support for Intel PXA2xx SOCs.
If in doubt, say N.
-
-config ACPI_CPPC_CPUFREQ
- tristate "CPUFreq driver based on the ACPI CPPC spec"
- depends on ACPI_PROCESSOR
- select ACPI_CPPC_LIB
- default n
- help
- This adds a CPUFreq driver which uses CPPC methods
- as described in the ACPIv5.1 spec. CPPC stands for
- Collaborative Processor Performance Controls. It
- is based on an abstract continuous scale of CPU
- performance values which allows the remote power
- processor to flexibly optimize for power and
- performance. CPPC relies on power management firmware
- support for its operation.
-
- If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 812f9e0d01a3..e07715ce8844 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -52,23 +52,26 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o
# LITTLE drivers, so that it is probed last.
obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
+obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o
obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
+obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
@@ -81,8 +84,6 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o
obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
-obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
-obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
##################################################################################
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
new file mode 100644
index 000000000000..c6ebc88a7d8d
--- /dev/null
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CPU frequency scaling support for Armada 37xx platform.
+ *
+ * Copyright (C) 2017 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* Power management in North Bridge register set */
+#define ARMADA_37XX_NB_L0L1 0x18
+#define ARMADA_37XX_NB_L2L3 0x1C
+#define ARMADA_37XX_NB_TBG_DIV_OFF 13
+#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
+#define ARMADA_37XX_NB_CLK_SEL_OFF 11
+#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
+#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1
+#define ARMADA_37XX_NB_TBG_SEL_OFF 9
+#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
+#define ARMADA_37XX_NB_VDD_SEL_OFF 6
+#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3
+#define ARMADA_37XX_NB_CONFIG_SHIFT 16
+#define ARMADA_37XX_NB_DYN_MOD 0x24
+#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26)
+#define ARMADA_37XX_NB_TBG_EN BIT(28)
+#define ARMADA_37XX_NB_DIV_EN BIT(29)
+#define ARMADA_37XX_NB_VDD_EN BIT(30)
+#define ARMADA_37XX_NB_DFS_EN BIT(31)
+#define ARMADA_37XX_NB_CPU_LOAD 0x30
+#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
+#define ARMADA_37XX_DVFS_LOAD_0 0
+#define ARMADA_37XX_DVFS_LOAD_1 1
+#define ARMADA_37XX_DVFS_LOAD_2 2
+#define ARMADA_37XX_DVFS_LOAD_3 3
+
+/*
+ * On Armada 37xx the Power management manages 4 level of CPU load,
+ * each level can be associated with a CPU clock source, a CPU
+ * divider, a VDD level, etc...
+ */
+#define LOAD_LEVEL_NR 4
+
+struct armada_37xx_dvfs {
+ u32 cpu_freq_max;
+ u8 divider[LOAD_LEVEL_NR];
+};
+
+static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
+ {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
+ {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
+ {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} },
+ {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} },
+};
+
+static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) {
+ if (freq == armada_37xx_dvfs[i].cpu_freq_max)
+ return &armada_37xx_dvfs[i];
+ }
+
+ pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);
+ return NULL;
+}
+
+/*
+ * Setup the four level managed by the hardware. Once the four level
+ * will be configured then the DVFS will be enabled.
+ */
+static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
+ struct clk *clk, u8 *divider)
+{
+ int load_lvl;
+ struct clk *parent;
+
+ for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
+ unsigned int reg, mask, val, offset = 0;
+
+ if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1)
+ reg = ARMADA_37XX_NB_L0L1;
+ else
+ reg = ARMADA_37XX_NB_L2L3;
+
+ if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 ||
+ load_lvl == ARMADA_37XX_DVFS_LOAD_2)
+ offset += ARMADA_37XX_NB_CONFIG_SHIFT;
+
+ /* Set cpu clock source, for all the level we use TBG */
+ val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF;
+ mask = (ARMADA_37XX_NB_CLK_SEL_MASK
+ << ARMADA_37XX_NB_CLK_SEL_OFF);
+
+ /*
+ * Set cpu divider based on the pre-computed array in
+ * order to have balanced step.
+ */
+ val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF;
+ mask |= (ARMADA_37XX_NB_TBG_DIV_MASK
+ << ARMADA_37XX_NB_TBG_DIV_OFF);
+
+ /* Set VDD divider which is actually the load level. */
+ val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF;
+ mask |= (ARMADA_37XX_NB_VDD_SEL_MASK
+ << ARMADA_37XX_NB_VDD_SEL_OFF);
+
+ val <<= offset;
+ mask <<= offset;
+
+ regmap_update_bits(base, reg, mask, val);
+ }
+
+ /*
+ * Set cpu clock source, for all the level we keep the same
+ * clock source that the one already configured. For this one
+ * we need to use the clock framework
+ */
+ parent = clk_get_parent(clk);
+ clk_set_parent(clk, parent);
+}
+
+static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
+{
+ unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
+ mask = ARMADA_37XX_NB_DFS_EN;
+
+ regmap_update_bits(base, reg, mask, 0);
+}
+
+static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
+{
+ unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD,
+ mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
+
+ /* Start with the highest load (0) */
+ val = ARMADA_37XX_DVFS_LOAD_0;
+ regmap_update_bits(base, reg, mask, val);
+
+ /* Now enable DVFS for the CPUs */
+ reg = ARMADA_37XX_NB_DYN_MOD;
+ mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN |
+ ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN |
+ ARMADA_37XX_NB_DFS_EN;
+
+ regmap_update_bits(base, reg, mask, mask);
+}
+
+static int __init armada37xx_cpufreq_driver_init(void)
+{
+ struct armada_37xx_dvfs *dvfs;
+ struct platform_device *pdev;
+ unsigned int cur_frequency;
+ struct regmap *nb_pm_base;
+ struct device *cpu_dev;
+ int load_lvl, ret;
+ struct clk *clk;
+
+ nb_pm_base =
+ syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
+
+ if (IS_ERR(nb_pm_base))
+ return -ENODEV;
+
+ /* Before doing any configuration on the DVFS first, disable it */
+ armada37xx_cpufreq_disable_dvfs(nb_pm_base);
+
+ /*
+ * On CPU 0 register the operating points supported (which are
+ * the nominal CPU frequency and full integer divisions of
+ * it).
+ */
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ dev_err(cpu_dev, "Cannot get CPU\n");
+ return -ENODEV;
+ }
+
+ clk = clk_get(cpu_dev, 0);
+ if (IS_ERR(clk)) {
+ dev_err(cpu_dev, "Cannot get clock for CPU0\n");
+ return PTR_ERR(clk);
+ }
+
+ /* Get nominal (current) CPU frequency */
+ cur_frequency = clk_get_rate(clk);
+ if (!cur_frequency) {
+ dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
+ return -EINVAL;
+ }
+
+ dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
+ if (!dvfs)
+ return -EINVAL;
+
+ armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
+
+ for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
+ load_lvl++) {
+ unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
+
+ ret = dev_pm_opp_add(cpu_dev, freq, 0);
+ if (ret) {
+ /* clean-up the already added opp before leaving */
+ while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
+ freq = cur_frequency / dvfs->divider[load_lvl];
+ dev_pm_opp_remove(cpu_dev, freq);
+ }
+ return ret;
+ }
+ }
+
+ /* Now that everything is setup, enable the DVFS at hardware level */
+ armada37xx_cpufreq_enable_dvfs(nb_pm_base);
+
+ pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+
+ return PTR_ERR_OR_ZERO(pdev);
+}
+/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
+late_initcall(armada37xx_cpufreq_driver_init);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index ecc56e26f8f6..3b585e4bfac5 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -108,6 +108,14 @@ static const struct of_device_id blacklist[] __initconst = {
{ .compatible = "marvell,armadaxp", },
+ { .compatible = "mediatek,mt2701", },
+ { .compatible = "mediatek,mt2712", },
+ { .compatible = "mediatek,mt7622", },
+ { .compatible = "mediatek,mt7623", },
+ { .compatible = "mediatek,mt817x", },
+ { .compatible = "mediatek,mt8173", },
+ { .compatible = "mediatek,mt8176", },
+
{ .compatible = "nvidia,tegra124", },
{ .compatible = "st,stih407", },
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 41d148af7748..421f318c0e66 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -601,19 +601,18 @@ static struct cpufreq_governor *find_governor(const char *str_governor)
/**
* cpufreq_parse_governor - parse a governor string
*/
-static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
- struct cpufreq_governor **governor)
+static int cpufreq_parse_governor(char *str_governor,
+ struct cpufreq_policy *policy)
{
- int err = -EINVAL;
-
if (cpufreq_driver->setpolicy) {
if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
- *policy = CPUFREQ_POLICY_PERFORMANCE;
- err = 0;
- } else if (!strncasecmp(str_governor, "powersave",
- CPUFREQ_NAME_LEN)) {
- *policy = CPUFREQ_POLICY_POWERSAVE;
- err = 0;
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+ return 0;
+ }
+
+ if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) {
+ policy->policy = CPUFREQ_POLICY_POWERSAVE;
+ return 0;
}
} else {
struct cpufreq_governor *t;
@@ -621,26 +620,31 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
mutex_lock(&cpufreq_governor_mutex);
t = find_governor(str_governor);
-
- if (t == NULL) {
+ if (!t) {
int ret;
mutex_unlock(&cpufreq_governor_mutex);
+
ret = request_module("cpufreq_%s", str_governor);
- mutex_lock(&cpufreq_governor_mutex);
+ if (ret)
+ return -EINVAL;
- if (ret == 0)
- t = find_governor(str_governor);
- }
+ mutex_lock(&cpufreq_governor_mutex);
- if (t != NULL) {
- *governor = t;
- err = 0;
+ t = find_governor(str_governor);
}
+ if (t && !try_module_get(t->owner))
+ t = NULL;
mutex_unlock(&cpufreq_governor_mutex);
+
+ if (t) {
+ policy->governor = t;
+ return 0;
+ }
}
- return err;
+
+ return -EINVAL;
}
/**
@@ -760,11 +764,14 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
if (ret != 1)
return -EINVAL;
- if (cpufreq_parse_governor(str_governor, &new_policy.policy,
- &new_policy.governor))
+ if (cpufreq_parse_governor(str_governor, &new_policy))
return -EINVAL;
ret = cpufreq_set_policy(policy, &new_policy);
+
+ if (new_policy.governor)
+ module_put(new_policy.governor->owner);
+
return ret ? ret : count;
}
@@ -1044,8 +1051,7 @@ static int cpufreq_init_policy(struct cpufreq_policy *policy)
if (policy->last_policy)
new_policy.policy = policy->last_policy;
else
- cpufreq_parse_governor(gov->name, &new_policy.policy,
- NULL);
+ cpufreq_parse_governor(gov->name, &new_policy);
}
/* set default policy */
return cpufreq_set_policy(policy, &new_policy);
@@ -2160,7 +2166,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor)
mutex_lock(&cpufreq_governor_mutex);
list_del(&governor->governor_list);
mutex_unlock(&cpufreq_governor_mutex);
- return;
}
EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index c46a12df40dd..5faa37c5b091 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -894,7 +894,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
longhaul_setup_voltagescaling();
- policy->cpuinfo.transition_latency = 200000; /* nsec */
+ policy->transition_delay_us = 200000; /* usec */
return cpufreq_table_validate_and_show(policy, longhaul_table);
}
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index e0d5090b303d..b783919f063d 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -574,6 +574,7 @@ static struct platform_driver mtk_cpufreq_platdrv = {
/* List of machines supported by this driver */
static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
{ .compatible = "mediatek,mt2701", },
+ { .compatible = "mediatek,mt2712", },
{ .compatible = "mediatek,mt7622", },
{ .compatible = "mediatek,mt7623", },
{ .compatible = "mediatek,mt817x", },
diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c
index ed915ee85dd9..31513bd42705 100644
--- a/drivers/cpufreq/mvebu-cpufreq.c
+++ b/drivers/cpufreq/mvebu-cpufreq.c
@@ -76,12 +76,6 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
return PTR_ERR(clk);
}
- /*
- * In case of a failure of dev_pm_opp_add(), we don't
- * bother with cleaning up the registered OPP (there's
- * no function to do so), and simply cancel the
- * registration of the cpufreq device.
- */
ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
if (ret) {
clk_put(clk);
@@ -91,7 +85,8 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
if (ret) {
clk_put(clk);
- return ret;
+ dev_err(cpu_dev, "Failed to register OPPs\n");
+ goto opp_register_failed;
}
ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
@@ -99,9 +94,16 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
if (ret)
dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
__func__, ret);
+ clk_put(clk);
}
platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
return 0;
+
+opp_register_failed:
+ /* As registering has failed remove all the opp for all cpus */
+ dev_pm_opp_cpumask_remove_table(cpu_possible_mask);
+
+ return ret;
}
device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 923317f03b4b..a099b7bf74cd 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -17,6 +17,7 @@
#include <linux/cpu.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -50,6 +51,7 @@ struct ti_cpufreq_soc_data {
unsigned long efuse_mask;
unsigned long efuse_shift;
unsigned long rev_offset;
+ bool multi_regulator;
};
struct ti_cpufreq_data {
@@ -57,6 +59,7 @@ struct ti_cpufreq_data {
struct device_node *opp_node;
struct regmap *syscon;
const struct ti_cpufreq_soc_data *soc_data;
+ struct opp_table *opp_table;
};
static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data,
@@ -95,6 +98,7 @@ static struct ti_cpufreq_soc_data am3x_soc_data = {
.efuse_offset = 0x07fc,
.efuse_mask = 0x1fff,
.rev_offset = 0x600,
+ .multi_regulator = false,
};
static struct ti_cpufreq_soc_data am4x_soc_data = {
@@ -103,6 +107,7 @@ static struct ti_cpufreq_soc_data am4x_soc_data = {
.efuse_offset = 0x0610,
.efuse_mask = 0x3f,
.rev_offset = 0x600,
+ .multi_regulator = false,
};
static struct ti_cpufreq_soc_data dra7_soc_data = {
@@ -111,6 +116,7 @@ static struct ti_cpufreq_soc_data dra7_soc_data = {
.efuse_mask = 0xf80000,
.efuse_shift = 19,
.rev_offset = 0x204,
+ .multi_regulator = true,
};
/**
@@ -195,12 +201,14 @@ static const struct of_device_id ti_cpufreq_of_match[] = {
{},
};
-static int ti_cpufreq_init(void)
+static int ti_cpufreq_probe(struct platform_device *pdev)
{
u32 version[VERSION_COUNT];
struct device_node *np;
const struct of_device_id *match;
+ struct opp_table *ti_opp_table;
struct ti_cpufreq_data *opp_data;
+ const char * const reg_names[] = {"vdd", "vbb"};
int ret;
np = of_find_node_by_path("/");
@@ -247,16 +255,29 @@ static int ti_cpufreq_init(void)
if (ret)
goto fail_put_node;
- ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
- version, VERSION_COUNT));
- if (ret) {
+ ti_opp_table = dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
+ version, VERSION_COUNT);
+ if (IS_ERR(ti_opp_table)) {
dev_err(opp_data->cpu_dev,
"Failed to set supported hardware\n");
+ ret = PTR_ERR(ti_opp_table);
goto fail_put_node;
}
- of_node_put(opp_data->opp_node);
+ opp_data->opp_table = ti_opp_table;
+
+ if (opp_data->soc_data->multi_regulator) {
+ ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
+ reg_names,
+ ARRAY_SIZE(reg_names));
+ if (IS_ERR(ti_opp_table)) {
+ dev_pm_opp_put_supported_hw(opp_data->opp_table);
+ ret = PTR_ERR(ti_opp_table);
+ goto fail_put_node;
+ }
+ }
+ of_node_put(opp_data->opp_node);
register_cpufreq_dt:
platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
@@ -269,4 +290,22 @@ free_opp_data:
return ret;
}
-device_initcall(ti_cpufreq_init);
+
+static int ti_cpufreq_init(void)
+{
+ platform_device_register_simple("ti-cpufreq", -1, NULL, 0);
+ return 0;
+}
+module_init(ti_cpufreq_init);
+
+static struct platform_driver ti_cpufreq_driver = {
+ .probe = ti_cpufreq_probe,
+ .driver = {
+ .name = "ti-cpufreq",
+ },
+};
+module_platform_driver(ti_cpufreq_driver);
+
+MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver");
+MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/opp/Makefile b/drivers/opp/Makefile
index e70ceb406fe9..6ce6aefacc81 100644
--- a/drivers/opp/Makefile
+++ b/drivers/opp/Makefile
@@ -2,3 +2,4 @@ ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
obj-y += core.o cpu.o
obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_DEBUG_FS) += debugfs.o
+obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-opp-supply.o
diff --git a/drivers/opp/ti-opp-supply.c b/drivers/opp/ti-opp-supply.c
new file mode 100644
index 000000000000..44dae3e51aac
--- /dev/null
+++ b/drivers/opp/ti-opp-supply.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon <nm@ti.com>
+ * Dave Gerlach <d-gerlach@ti.com>
+ *
+ * TI OPP supply driver that provides override into the regulator control
+ * for generic opp core to handle devices with ABB regulator and/or
+ * SmartReflex Class0.
+ */
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/**
+ * struct ti_opp_supply_optimum_voltage_table - optimized voltage table
+ * @reference_uv: reference voltage (usually Nominal voltage)
+ * @optimized_uv: Optimized voltage from efuse
+ */
+struct ti_opp_supply_optimum_voltage_table {
+ unsigned int reference_uv;
+ unsigned int optimized_uv;
+};
+
+/**
+ * struct ti_opp_supply_data - OMAP specific opp supply data
+ * @vdd_table: Optimized voltage mapping table
+ * @num_vdd_table: number of entries in vdd_table
+ * @vdd_absolute_max_voltage_uv: absolute maximum voltage in UV for the supply
+ */
+struct ti_opp_supply_data {
+ struct ti_opp_supply_optimum_voltage_table *vdd_table;
+ u32 num_vdd_table;
+ u32 vdd_absolute_max_voltage_uv;
+};
+
+static struct ti_opp_supply_data opp_data;
+
+/**
+ * struct ti_opp_supply_of_data - device tree match data
+ * @flags: specific type of opp supply
+ * @efuse_voltage_mask: mask required for efuse register representing voltage
+ * @efuse_voltage_uv: Are the efuse entries in micro-volts? if not, assume
+ * milli-volts.
+ */
+struct ti_opp_supply_of_data {
+#define OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE BIT(1)
+#define OPPDM_HAS_NO_ABB BIT(2)
+ const u8 flags;
+ const u32 efuse_voltage_mask;
+ const bool efuse_voltage_uv;
+};
+
+/**
+ * _store_optimized_voltages() - store optimized voltages
+ * @dev: ti opp supply device for which we need to store info
+ * @data: data specific to the device
+ *
+ * Picks up efuse based optimized voltages for VDD unique per device and
+ * stores it in internal data structure for use during transition requests.
+ *
+ * Return: If successful, 0, else appropriate error value.
+ */
+static int _store_optimized_voltages(struct device *dev,
+ struct ti_opp_supply_data *data)
+{
+ void __iomem *base;
+ struct property *prop;
+ struct resource *res;
+ const __be32 *val;
+ int proplen, i;
+ int ret = 0;
+ struct ti_opp_supply_optimum_voltage_table *table;
+ const struct ti_opp_supply_of_data *of_data = dev_get_drvdata(dev);
+
+ /* pick up Efuse based voltages */
+ res = platform_get_resource(to_platform_device(dev), IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Unable to get IO resource\n");
+ ret = -ENODEV;
+ goto out_map;
+ }
+
+ base = ioremap_nocache(res->start, resource_size(res));
+ if (!base) {
+ dev_err(dev, "Unable to map Efuse registers\n");
+ ret = -ENOMEM;
+ goto out_map;
+ }
+
+ /* Fetch efuse-settings. */
+ prop = of_find_property(dev->of_node, "ti,efuse-settings", NULL);
+ if (!prop) {
+ dev_err(dev, "No 'ti,efuse-settings' property found\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ proplen = prop->length / sizeof(int);
+ data->num_vdd_table = proplen / 2;
+ /* Verify for corrupted OPP entries in dt */
+ if (data->num_vdd_table * 2 * sizeof(int) != prop->length) {
+ dev_err(dev, "Invalid 'ti,efuse-settings'\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = of_property_read_u32(dev->of_node, "ti,absolute-max-voltage-uv",
+ &data->vdd_absolute_max_voltage_uv);
+ if (ret) {
+ dev_err(dev, "ti,absolute-max-voltage-uv is missing\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ table = kzalloc(sizeof(*data->vdd_table) *
+ data->num_vdd_table, GFP_KERNEL);
+ if (!table) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ data->vdd_table = table;
+
+ val = prop->value;
+ for (i = 0; i < data->num_vdd_table; i++, table++) {
+ u32 efuse_offset;
+ u32 tmp;
+
+ table->reference_uv = be32_to_cpup(val++);
+ efuse_offset = be32_to_cpup(val++);
+
+ tmp = readl(base + efuse_offset);
+ tmp &= of_data->efuse_voltage_mask;
+ tmp >>= __ffs(of_data->efuse_voltage_mask);
+
+ table->optimized_uv = of_data->efuse_voltage_uv ? tmp :
+ tmp * 1000;
+
+ dev_dbg(dev, "[%d] efuse=0x%08x volt_table=%d vset=%d\n",
+ i, efuse_offset, table->reference_uv,
+ table->optimized_uv);
+
+ /*
+ * Some older samples might not have optimized efuse
+ * Use reference voltage for those - just add debug message
+ * for them.
+ */
+ if (!table->optimized_uv) {
+ dev_dbg(dev, "[%d] efuse=0x%08x volt_table=%d:vset0\n",
+ i, efuse_offset, table->reference_uv);
+ table->optimized_uv = table->reference_uv;
+ }
+ }
+out:
+ iounmap(base);
+out_map:
+ return ret;
+}
+
+/**
+ * _free_optimized_voltages() - free resources for optvoltages
+ * @dev: device for which we need to free info
+ * @data: data specific to the device
+ */
+static void _free_optimized_voltages(struct device *dev,
+ struct ti_opp_supply_data *data)
+{
+ kfree(data->vdd_table);
+ data->vdd_table = NULL;
+ data->num_vdd_table = 0;
+}
+
+/**
+ * _get_optimal_vdd_voltage() - Finds optimal voltage for the supply
+ * @dev: device for which we need to find info
+ * @data: data specific to the device
+ * @reference_uv: reference voltage (OPP voltage) for which we need value
+ *
+ * Return: if a match is found, return optimized voltage, else return
+ * reference_uv, also return reference_uv if no optimization is needed.
+ */
+static int _get_optimal_vdd_voltage(struct device *dev,
+ struct ti_opp_supply_data *data,
+ int reference_uv)
+{
+ int i;
+ struct ti_opp_supply_optimum_voltage_table *table;
+
+ if (!data->num_vdd_table)
+ return reference_uv;
+
+ table = data->vdd_table;
+ if (!table)
+ return -EINVAL;
+
+ /* Find a exact match - this list is usually very small */
+ for (i = 0; i < data->num_vdd_table; i++, table++)
+ if (table->reference_uv == reference_uv)
+ return table->optimized_uv;
+
+ /* IF things are screwed up, we'd make a mess on console.. ratelimit */
+ dev_err_ratelimited(dev, "%s: Failed optimized voltage match for %d\n",
+ __func__, reference_uv);
+ return reference_uv;
+}
+
+static int _opp_set_voltage(struct device *dev,
+ struct dev_pm_opp_supply *supply,
+ int new_target_uv, struct regulator *reg,
+ char *reg_name)
+{
+ int ret;
+ unsigned long vdd_uv, uv_max;
+
+ if (new_target_uv)
+ vdd_uv = new_target_uv;
+ else
+ vdd_uv = supply->u_volt;
+
+ /*
+ * If we do have an absolute max voltage specified, then we should
+ * use that voltage instead to allow for cases where the voltage rails
+ * are ganged (example if we set the max for an opp as 1.12v, and
+ * the absolute max is 1.5v, for another rail to get 1.25v, it cannot
+ * be achieved if the regulator is constrainted to max of 1.12v, even
+ * if it can function at 1.25v
+ */
+ if (opp_data.vdd_absolute_max_voltage_uv)
+ uv_max = opp_data.vdd_absolute_max_voltage_uv;
+ else
+ uv_max = supply->u_volt_max;
+
+ if (vdd_uv > uv_max ||
+ vdd_uv < supply->u_volt_min ||
+ supply->u_volt_min > uv_max) {
+ dev_warn(dev,
+ "Invalid range voltages [Min:%lu target:%lu Max:%lu]\n",
+ supply->u_volt_min, vdd_uv, uv_max);
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "%s scaling to %luuV[min %luuV max %luuV]\n", reg_name,
+ vdd_uv, supply->u_volt_min,
+ uv_max);
+
+ ret = regulator_set_voltage_triplet(reg,
+ supply->u_volt_min,
+ vdd_uv,
+ uv_max);
+ if (ret) {
+ dev_err(dev, "%s failed for %luuV[min %luuV max %luuV]\n",
+ reg_name, vdd_uv, supply->u_volt_min,
+ uv_max);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ti_opp_supply_set_opp() - do the opp supply transition
+ * @data: information on regulators and new and old opps provided by
+ * opp core to use in transition
+ *
+ * Return: If successful, 0, else appropriate error value.
+ */
+int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data)
+{
+ struct dev_pm_opp_supply *old_supply_vdd = &data->old_opp.supplies[0];
+ struct dev_pm_opp_supply *old_supply_vbb = &data->old_opp.supplies[1];
+ struct dev_pm_opp_supply *new_supply_vdd = &data->new_opp.supplies[0];
+ struct dev_pm_opp_supply *new_supply_vbb = &data->new_opp.supplies[1];
+ struct device *dev = data->dev;
+ unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
+ struct clk *clk = data->clk;
+ struct regulator *vdd_reg = data->regulators[0];
+ struct regulator *vbb_reg = data->regulators[1];
+ int vdd_uv;
+ int ret;
+
+ vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data,
+ new_supply_vbb->u_volt);
+
+ /* Scaling up? Scale voltage before frequency */
+ if (freq > old_freq) {
+ ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg,
+ "vdd");
+ if (ret)
+ goto restore_voltage;
+
+ ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb");
+ if (ret)
+ goto restore_voltage;
+ }
+
+ /* Change frequency */
+ dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n",
+ __func__, old_freq, freq);
+
+ ret = clk_set_rate(clk, freq);
+ if (ret) {
+ dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
+ ret);
+ goto restore_voltage;
+ }
+
+ /* Scaling down? Scale voltage after frequency */
+ if (freq < old_freq) {
+ ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb");
+ if (ret)
+ goto restore_freq;
+
+ ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg,
+ "vdd");
+ if (ret)
+ goto restore_freq;
+ }
+
+ return 0;
+
+restore_freq:
+ ret = clk_set_rate(clk, old_freq);
+ if (ret)
+ dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
+ __func__, old_freq);
+restore_voltage:
+ /* This shouldn't harm even if the voltages weren't updated earlier */
+ if (old_supply_vdd->u_volt) {
+ ret = _opp_set_voltage(dev, old_supply_vbb, 0, vbb_reg, "vbb");
+ if (ret)
+ return ret;
+
+ ret = _opp_set_voltage(dev, old_supply_vdd, 0, vdd_reg,
+ "vdd");
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+static const struct ti_opp_supply_of_data omap_generic_of_data = {
+};
+
+static const struct ti_opp_supply_of_data omap_omap5_of_data = {
+ .flags = OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE,
+ .efuse_voltage_mask = 0xFFF,
+ .efuse_voltage_uv = false,
+};
+
+static const struct ti_opp_supply_of_data omap_omap5core_of_data = {
+ .flags = OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE | OPPDM_HAS_NO_ABB,
+ .efuse_voltage_mask = 0xFFF,
+ .efuse_voltage_uv = false,
+};
+
+static const struct of_device_id ti_opp_supply_of_match[] = {
+ {.compatible = "ti,omap-opp-supply", .data = &omap_generic_of_data},
+ {.compatible = "ti,omap5-opp-supply", .data = &omap_omap5_of_data},
+ {.compatible = "ti,omap5-core-opp-supply",
+ .data = &omap_omap5core_of_data},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ti_opp_supply_of_match);
+
+static int ti_opp_supply_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *cpu_dev = get_cpu_device(0);
+ const struct of_device_id *match;
+ const struct ti_opp_supply_of_data *of_data;
+ int ret = 0;
+
+ match = of_match_device(ti_opp_supply_of_match, dev);
+ if (!match) {
+ /* We do not expect this to happen */
+ dev_err(dev, "%s: Unable to match device\n", __func__);
+ return -ENODEV;
+ }
+ if (!match->data) {
+ /* Again, unlikely.. but mistakes do happen */
+ dev_err(dev, "%s: Bad data in match\n", __func__);
+ return -EINVAL;
+ }
+ of_data = match->data;
+
+ dev_set_drvdata(dev, (void *)of_data);
+
+ /* If we need optimized voltage */
+ if (of_data->flags & OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE) {
+ ret = _store_optimized_voltages(dev, &opp_data);
+ if (ret)
+ return ret;
+ }
+
+ ret = PTR_ERR_OR_ZERO(dev_pm_opp_register_set_opp_helper(cpu_dev,
+ ti_opp_supply_set_opp));
+ if (ret)
+ _free_optimized_voltages(dev, &opp_data);
+
+ return ret;
+}
+
+static struct platform_driver ti_opp_supply_driver = {
+ .probe = ti_opp_supply_probe,
+ .driver = {
+ .name = "ti_opp_supply",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ti_opp_supply_of_match),
+ },
+};
+module_platform_driver(ti_opp_supply_driver);
+
+MODULE_DESCRIPTION("Texas Instruments OMAP OPP Supply driver");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 15:24:28 +0000