summaryrefslogtreecommitdiff
path: root/drivers/block/ata_piix.c
blob: fcae44850837b0e9a2c3a65f860a862ea0605bee (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
/*
 * Copyright (C) Procsys. All rights reserved.
 * Author: Mushtaq Khan <mushtaq_k@procsys.com>
 *			<mushtaqk_921@yahoo.co.in>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 * with the reference to ata_piix driver in kernel 2.4.32
 */

/*
 * This file contains SATA controller and SATA drive initialization functions
 */

#include <common.h>
#include <asm/io.h>
#include <pci.h>
#include <command.h>
#include <config.h>
#include <asm/byteorder.h>
#include <part.h>
#include <ide.h>
#include <ata.h>
#include <sata.h>

#define DEBUG_SATA 0		/* For debug prints set DEBUG_SATA to 1 */

#define SATA_DECL
#define DRV_DECL		/* For file specific declarations */
#include "ata_piix.h"

/* Macros realted to PCI */
#define PCI_SATA_BUS	0x00
#define PCI_SATA_DEV	0x1f
#define PCI_SATA_FUNC	0x02

#define PCI_SATA_BASE1 0x10
#define PCI_SATA_BASE2 0x14
#define PCI_SATA_BASE3 0x18
#define PCI_SATA_BASE4 0x1c
#define PCI_SATA_BASE5 0x20
#define PCI_PMR         0x90
#define PCI_PI          0x09
#define PCI_PCS         0x92
#define PCI_DMA_CTL     0x48

#define PORT_PRESENT (1<<0)
#define PORT_ENABLED (1<<4)

u32 bdf;
u32 iobase1;		/* Primary cmd block */
u32 iobase2;		/* Primary ctl block */
u32 iobase3;		/* Sec cmd block */
u32 iobase4;		/* sec ctl block */
u32 iobase5;		/* BMDMA*/

int pci_sata_init(void)
{
	u32 bus = PCI_SATA_BUS;
	u32 dev = PCI_SATA_DEV;
	u32 fun = PCI_SATA_FUNC;
	u16 cmd = 0;
	u8 lat = 0, pcibios_max_latency = 0xff;
	u8 pmr; /* Port mapping reg */
	u8 pi; /* Prgming Interface reg */

	bdf = PCI_BDF(bus, dev, fun);
	pci_read_config_dword(bdf, PCI_SATA_BASE1, &iobase1);
	pci_read_config_dword(bdf, PCI_SATA_BASE2, &iobase2);
	pci_read_config_dword(bdf, PCI_SATA_BASE3, &iobase3);
	pci_read_config_dword(bdf, PCI_SATA_BASE4, &iobase4);
	pci_read_config_dword(bdf, PCI_SATA_BASE5, &iobase5);

	if ((iobase1 == 0xFFFFFFFF) || (iobase2 == 0xFFFFFFFF) ||
	    (iobase3 == 0xFFFFFFFF) || (iobase4 == 0xFFFFFFFF) ||
	    (iobase5 == 0xFFFFFFFF)) {
		/* ERROR */
		printf("error no base addr for SATA controller\n");
		return 1;
	}

	iobase1 &= 0xFFFFFFFE;
	iobase2 &= 0xFFFFFFFE;
	iobase3 &= 0xFFFFFFFE;
	iobase4 &= 0xFFFFFFFE;
	iobase5 &= 0xFFFFFFFE;

	/* check for mode */
	pci_read_config_byte(bdf, PCI_PMR, &pmr);
	if (pmr > 1) {
		puts("combined mode not supported\n");
		return 1;
	}

	pci_read_config_byte(bdf, PCI_PI, &pi);
	if ((pi & 0x05) != 0x05) {
		puts("Sata is in Legacy mode\n");
		return 1;
	} else
		puts("sata is in Native mode\n");

	/* MASTER CFG AND IO CFG */
	pci_read_config_word(bdf, PCI_COMMAND, &cmd);
	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
	pci_write_config_word(bdf, PCI_COMMAND, cmd);
	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);

	if (lat < 16)
		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
	else if (lat > pcibios_max_latency)
		lat = pcibios_max_latency;
	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);

	return 0;
}

int sata_bus_probe(int port_no)
{
	int orig_mask, mask;
	u16 pcs;

	mask = (PORT_PRESENT << port_no);
	pci_read_config_word(bdf, PCI_PCS, &pcs);
	orig_mask = (int) pcs & 0xff;
	if ((orig_mask & mask) != mask)
		return 0;
	else
		return 1;
}

int init_sata(int dev)
{
	static int done;
	u8 i, rv = 0;

	if (!done)
		done = 1;
	else
		return 0;

	rv = pci_sata_init();
	if (rv == 1) {
		puts("pci initialization failed\n");
		return 1;
	}

	port[0].port_no = 0;
	port[0].ioaddr.cmd_addr = iobase1;
	port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr =
	    iobase2 | ATA_PCI_CTL_OFS;
	port[0].ioaddr.bmdma_addr = iobase5;

	port[1].port_no = 1;
	port[1].ioaddr.cmd_addr = iobase3;
	port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr =
	    iobase4 | ATA_PCI_CTL_OFS;
	port[1].ioaddr.bmdma_addr = iobase5 + 0x8;

	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++)
		sata_port(&port[i].ioaddr);

	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
		if (!(sata_bus_probe(i))) {
			port[i].port_state = 0;
			printf("SATA#%d port is not present\n", i);
		} else {
			printf("SATA#%d port is present\n", i);
			if (sata_bus_softreset(i))
				port[i].port_state = 0;
			else
				port[i].port_state = 1;
		}
	}

	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
		u8 j, devno;

		if (port[i].port_state == 0)
			continue;
		for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) {
			sata_identify(i, j);
			set_Feature_cmd(i, j);
			devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
			if ((sata_dev_desc[devno].lba > 0) &&
			    (sata_dev_desc[devno].blksz > 0)) {
				dev_print(&sata_dev_desc[devno]);
				/* initialize partition type */
				init_part(&sata_dev_desc[devno]);
			}
		}
	}
	return 0;
}

static inline u8 sata_inb(unsigned long ioaddr)
{
	return inb(ioaddr);
}

static inline void sata_outb(unsigned char val, unsigned long ioaddr)
{
	outb(val, ioaddr);
}

static void output_data(struct sata_ioports *ioaddr, ulong * sect_buf,
		int words)
{
	outsw(ioaddr->data_addr, sect_buf, words << 1);
}

static int input_data(struct sata_ioports *ioaddr, ulong * sect_buf, int words)
{
	insw(ioaddr->data_addr, sect_buf, words << 1);
	return 0;
}

static void sata_cpy(unsigned char *dst, unsigned char *src, unsigned int len)
{
	unsigned char *end, *last;

	last = dst;
	end = src + len - 1;

	/* reserve space for '\0' */
	if (len < 2)
		goto OUT;

	/* skip leading white space */
	while ((*src) && (src < end) && (*src == ' '))
		++src;

	/* copy string, omitting trailing white space */
	while ((*src) && (src < end)) {
		*dst++ = *src;
		if (*src++ != ' ')
			last = dst;
	}
OUT:
	*last = '\0';
}

int sata_bus_softreset(int num)
{
	u8 dev = 0, status = 0, i;

	port[num].dev_mask = 0;

	for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) {
		if (!(sata_devchk(&port[num].ioaddr, i))) {
			debug("dev_chk failed for dev#%d\n", i);
		} else {
			port[num].dev_mask |= (1 << i);
			debug("dev_chk passed for dev#%d\n", i);
		}
	}

	if (!(port[num].dev_mask)) {
		printf("no devices on port%d\n", num);
		return 1;
	}

	dev_select(&port[num].ioaddr, dev);

	port[num].ctl_reg = 0x08;	/* Default value of control reg */
	sata_outb(port[num].ctl_reg, port[num].ioaddr.ctl_addr);
	udelay(10);
	sata_outb(port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr);
	udelay(10);
	sata_outb(port[num].ctl_reg, port[num].ioaddr.ctl_addr);

	/*
	 * spec mandates ">= 2ms" before checking status.
	 * We wait 150ms, because that was the magic delay used for
	 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
	 * between when the ATA command register is written, and then
	 * status is checked.  Because waiting for "a while" before
	 * checking status is fine, post SRST, we perform this magic
	 * delay here as well.
	 */
	mdelay(150);
	status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 300);
	while ((status & ATA_BUSY)) {
		mdelay(100);
		status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 3);
	}

	if (status & ATA_BUSY)
		printf("ata%u is slow to respond,plz be patient\n", num);

	while ((status & ATA_BUSY)) {
		mdelay(100);
		status = sata_chk_status(&port[num].ioaddr);
	}

	if (status & ATA_BUSY) {
		printf("ata%u failed to respond : bus reset failed\n", num);
		return 1;
	}
	return 0;
}

void sata_identify(int num, int dev)
{
	u8 cmd = 0, status = 0;
	u8 devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev;
	u16 iobuf[ATA_SECT_SIZE];
	u64 n_sectors = 0;
	u8 mask = 0;

	memset(iobuf, 0, sizeof(iobuf));
	hd_driveid_t *iop = (hd_driveid_t *) iobuf;

	if (dev == 0)
		mask = 0x01;
	else
		mask = 0x02;

	if (!(port[num].dev_mask & mask)) {
		printf("dev%d is not present on port#%d\n", dev, num);
		return;
	}

	printf("port=%d dev=%d\n", num, dev);

	dev_select(&port[num].ioaddr, dev);

	status = 0;
	cmd = ATA_CMD_IDENT;	/* Device Identify Command */
	sata_outb(cmd, port[num].ioaddr.command_addr);
	sata_inb(port[num].ioaddr.altstatus_addr);
	udelay(10);

	status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 1000);
	if (status & ATA_ERR) {
		puts("\ndevice not responding\n");
		port[num].dev_mask &= ~mask;
		return;
	}

	input_data(&port[num].ioaddr, (ulong *) iobuf, ATA_SECTORWORDS);

	debug("\nata%u: dev %u cfg 49:%04x 82:%04x 83:%04x 84:%04x85:%04x"
		"86:%04x" "87:%04x 88:%04x\n", num, dev, iobuf[49],
		iobuf[82], iobuf[83], iobuf[84], iobuf[85], iobuf[86],
		iobuf[87], iobuf[88]);

	/* we require LBA and DMA support (bits 8 & 9 of word 49) */
	if (!ata_id_has_dma(iobuf) || !ata_id_has_lba(iobuf))
		debug("ata%u: no dma/lba\n", num);
	ata_dump_id(iobuf);

	if (ata_id_has_lba48(iobuf))
		n_sectors = ata_id_u64(iobuf, 100);
	else
		n_sectors = ata_id_u32(iobuf, 60);
	debug("no. of sectors %u\n", ata_id_u64(iobuf, 100));
	debug("no. of sectors %u\n", ata_id_u32(iobuf, 60));

	if (n_sectors == 0) {
		port[num].dev_mask &= ~mask;
		return;
	}

	sata_cpy((unsigned char *)sata_dev_desc[devno].revision, iop->fw_rev,
		  sizeof(sata_dev_desc[devno].revision));
	sata_cpy((unsigned char *)sata_dev_desc[devno].vendor, iop->model,
		  sizeof(sata_dev_desc[devno].vendor));
	sata_cpy((unsigned char *)sata_dev_desc[devno].product, iop->serial_no,
		  sizeof(sata_dev_desc[devno].product));
	strswab(sata_dev_desc[devno].revision);
	strswab(sata_dev_desc[devno].vendor);

	if ((iop->config & 0x0080) == 0x0080)
		sata_dev_desc[devno].removable = 1;
	else
		sata_dev_desc[devno].removable = 0;

	sata_dev_desc[devno].lba = iop->lba_capacity;
	debug("lba=0x%x", sata_dev_desc[devno].lba);

#ifdef CONFIG_LBA48
	if (iop->command_set_2 & 0x0400) {
		sata_dev_desc[devno].lba48 = 1;
		lba = (unsigned long long) iop->lba48_capacity[0] |
		    ((unsigned long long) iop->lba48_capacity[1] << 16) |
		    ((unsigned long long) iop->lba48_capacity[2] << 32) |
		    ((unsigned long long) iop->lba48_capacity[3] << 48);
	} else {
		sata_dev_desc[devno].lba48 = 0;
	}
#endif

	/* assuming HD */
	sata_dev_desc[devno].type = DEV_TYPE_HARDDISK;
	sata_dev_desc[devno].blksz = ATA_BLOCKSIZE;
	sata_dev_desc[devno].log2blksz = LOG2(sata_dev_desc[devno].blksz);
	sata_dev_desc[devno].lun = 0;	/* just to fill something in... */
}

void set_Feature_cmd(int num, int dev)
{
	u8 mask = 0x00, status = 0;

	if (dev == 0)
		mask = 0x01;
	else
		mask = 0x02;

	if (!(port[num].dev_mask & mask)) {
		debug("dev%d is not present on port#%d\n", dev, num);
		return;
	}

	dev_select(&port[num].ioaddr, dev);

	sata_outb(SETFEATURES_XFER, port[num].ioaddr.feature_addr);
	sata_outb(XFER_PIO_4, port[num].ioaddr.nsect_addr);
	sata_outb(0, port[num].ioaddr.lbal_addr);
	sata_outb(0, port[num].ioaddr.lbam_addr);
	sata_outb(0, port[num].ioaddr.lbah_addr);

	sata_outb(ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
	sata_outb(ATA_CMD_SETF, port[num].ioaddr.command_addr);

	udelay(50);
	mdelay(150);

	status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 5000);
	if ((status & (ATA_STAT_BUSY | ATA_STAT_ERR))) {
		printf("Error  : status 0x%02x\n", status);
		port[num].dev_mask &= ~mask;
	}
}

void sata_port(struct sata_ioports *ioport)
{
	ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA;
	ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR;
	ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE;
	ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT;
	ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL;
	ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM;
	ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH;
	ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE;
	ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS;
	ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD;
}

int sata_devchk(struct sata_ioports *ioaddr, int dev)
{
	u8 nsect, lbal;

	dev_select(ioaddr, dev);

	sata_outb(0x55, ioaddr->nsect_addr);
	sata_outb(0xaa, ioaddr->lbal_addr);

	sata_outb(0xaa, ioaddr->nsect_addr);
	sata_outb(0x55, ioaddr->lbal_addr);

	sata_outb(0x55, ioaddr->nsect_addr);
	sata_outb(0xaa, ioaddr->lbal_addr);

	nsect = sata_inb(ioaddr->nsect_addr);
	lbal = sata_inb(ioaddr->lbal_addr);

	if ((nsect == 0x55) && (lbal == 0xaa))
		return 1;	/* we found a device */
	else
		return 0;	/* nothing found */
}

void dev_select(struct sata_ioports *ioaddr, int dev)
{
	u8 tmp = 0;

	if (dev == 0)
		tmp = ATA_DEVICE_OBS;
	else
		tmp = ATA_DEVICE_OBS | ATA_DEV1;

	sata_outb(tmp, ioaddr->device_addr);
	sata_inb(ioaddr->altstatus_addr);
	udelay(5);
}

u8 sata_busy_wait(struct sata_ioports *ioaddr, int bits, unsigned int max)
{
	u8 status;

	do {
		udelay(1000);
		status = sata_chk_status(ioaddr);
		max--;
	} while ((status & bits) && (max > 0));

	return status;
}

u8 sata_chk_status(struct sata_ioports *ioaddr)
{
	return sata_inb(ioaddr->status_addr);
}


ulong sata_read(int device, ulong blknr, lbaint_t blkcnt, void *buff)
{
	ulong n = 0, *buffer = (ulong *)buff;
	u8 dev = 0, num = 0, mask = 0, status = 0;

#ifdef CONFIG_LBA48
	unsigned char lba48 = 0;

	if (blknr & 0x0000fffff0000000) {
		if (!sata_dev_desc[devno].lba48) {
			printf("Drive doesn't support 48-bit addressing\n");
			return 0;
		}
		/* more than 28 bits used, use 48bit mode */
		lba48 = 1;
	}
#endif
	/* Port Number */
	num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
	/* dev on the port */
	if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
		dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
	else
		dev = device;

	if (dev == 0)
		mask = 0x01;
	else
		mask = 0x02;

	if (!(port[num].dev_mask & mask)) {
		printf("dev%d is not present on port#%d\n", dev, num);
		return 0;
	}

	/* Select device */
	dev_select(&port[num].ioaddr, dev);

	status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500);
	if (status & ATA_BUSY) {
		printf("ata%u failed to respond\n", port[num].port_no);
		return n;
	}
	while (blkcnt-- > 0) {
		status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500);
		if (status & ATA_BUSY) {
			printf("ata%u failed to respond\n", 0);
			return n;
		}
#ifdef CONFIG_LBA48
		if (lba48) {
			/* write high bits */
			sata_outb(0, port[num].ioaddr.nsect_addr);
			sata_outb((blknr >> 24) & 0xFF,
				   port[num].ioaddr.lbal_addr);
			sata_outb((blknr >> 32) & 0xFF,
				   port[num].ioaddr.lbam_addr);
			sata_outb((blknr >> 40) & 0xFF,
				   port[num].ioaddr.lbah_addr);
		}
#endif
		sata_outb(1, port[num].ioaddr.nsect_addr);
		sata_outb(((blknr) >> 0) & 0xFF,
			   port[num].ioaddr.lbal_addr);
		sata_outb((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
		sata_outb((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);

#ifdef CONFIG_LBA48
		if (lba48) {
			sata_outb(ATA_LBA, port[num].ioaddr.device_addr);
			sata_outb(ATA_CMD_READ_EXT,
				   port[num].ioaddr.command_addr);
		} else
#endif
		{
			sata_outb(ATA_LBA | ((blknr >> 24) & 0xF),
				   port[num].ioaddr.device_addr);
			sata_outb(ATA_CMD_READ,
				   port[num].ioaddr.command_addr);
		}

		mdelay(50);
		/* may take up to 4 sec */
		status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 4000);

		if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR))
		    != ATA_STAT_DRQ) {
			u8 err = 0;

			printf("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
				device, (ulong) blknr, status);
			err = sata_inb(port[num].ioaddr.error_addr);
			printf("Error reg = 0x%x\n", err);
			return n;
		}
		input_data(&port[num].ioaddr, buffer, ATA_SECTORWORDS);
		sata_inb(port[num].ioaddr.altstatus_addr);
		udelay(50);

		++n;
		++blknr;
		buffer += ATA_SECTORWORDS;
	}
	return n;
}

ulong sata_write(int device, ulong blknr, lbaint_t blkcnt, const void *buff)
{
	ulong n = 0, *buffer = (ulong *)buff;
	unsigned char status = 0, num = 0, dev = 0, mask = 0;

#ifdef CONFIG_LBA48
	unsigned char lba48 = 0;

	if (blknr & 0x0000fffff0000000) {
		if (!sata_dev_desc[devno].lba48) {
			printf("Drive doesn't support 48-bit addressing\n");
			return 0;
		}
		/* more than 28 bits used, use 48bit mode */
		lba48 = 1;
	}
#endif
	/* Port Number */
	num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
	/* dev on the Port */
	if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
		dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
	else
		dev = device;

	if (dev == 0)
		mask = 0x01;
	else
		mask = 0x02;

	/* Select device */
	dev_select(&port[num].ioaddr, dev);

	status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500);
	if (status & ATA_BUSY) {
		printf("ata%u failed to respond\n", port[num].port_no);
		return n;
	}

	while (blkcnt-- > 0) {
		status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500);
		if (status & ATA_BUSY) {
			printf("ata%u failed to respond\n",
				port[num].port_no);
			return n;
		}
#ifdef CONFIG_LBA48
		if (lba48) {
			/* write high bits */
			sata_outb(0, port[num].ioaddr.nsect_addr);
			sata_outb((blknr >> 24) & 0xFF,
				   port[num].ioaddr.lbal_addr);
			sata_outb((blknr >> 32) & 0xFF,
				   port[num].ioaddr.lbam_addr);
			sata_outb((blknr >> 40) & 0xFF,
				   port[num].ioaddr.lbah_addr);
		}
#endif
		sata_outb(1, port[num].ioaddr.nsect_addr);
		sata_outb((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr);
		sata_outb((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
		sata_outb((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
#ifdef CONFIG_LBA48
		if (lba48) {
			sata_outb(ATA_LBA, port[num].ioaddr.device_addr);
			sata_outb(ATA_CMD_WRITE_EXT,
				   port[num].ioaddr.command_addr);
		} else
#endif
		{
			sata_outb(ATA_LBA | ((blknr >> 24) & 0xF),
				   port[num].ioaddr.device_addr);
			sata_outb(ATA_CMD_WRITE,
				   port[num].ioaddr.command_addr);
		}

		mdelay(50);
		/* may take up to 4 sec */
		status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 4000);
		if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR))
		    != ATA_STAT_DRQ) {
			printf("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
				device, (ulong) blknr, status);
			return n;
		}

		output_data(&port[num].ioaddr, buffer, ATA_SECTORWORDS);
		sata_inb(port[num].ioaddr.altstatus_addr);
		udelay(50);

		++n;
		++blknr;
		buffer += ATA_SECTORWORDS;
	}
	return n;
}

int scan_sata(int dev)
{
	return 0;
}