summaryrefslogtreecommitdiff
path: root/doc/device-tree-bindings/video/tegra20-dc.txt
blob: 4731c3fbab4ad3c326fb71fa9110487aecd25d4a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
Display Controller
------------------

(there isn't yet a generic binding in Linux, so this describes what is in
U-Boot, and may change based on Linux activity)

The device node for a display device is as described in the document
"Open Firmware Recommended Practice : Universal Serial Bus" with the
following modifications and additions :

Required properties :
 - compatible : Should be "nvidia,tegra20-dc"

Required subnode 'rgb' is as follows:

Required properties (rgb) :
 - nvidia,panel : phandle of LCD panel information


The panel node describes the panel itself. This has the properties listed in
displaymode.txt as well as:

Required properties (panel) :
 - nvidia,bits-per-pixel: number of bits per pixel (depth)
 - nvidia,pwm : pwm to use to set display contrast (see tegra20-pwm.txt)
 - nvidia,panel-timings: 4 cells containing required timings in ms:
	* delay before asserting panel_vdd
	* delay between panel_vdd-rise and data-rise
	* delay between data-rise and backlight_vdd-rise
	* delay between backlight_vdd and pwm-rise
	* delay between pwm-rise and backlight_en-rise

Optional GPIO properies all have (phandle, GPIO number, flags):
 - nvidia,backlight-enable-gpios: backlight enable GPIO
 - nvidia,lvds-shutdown-gpios: LVDS power shutdown GPIO
 - nvidia,backlight-vdd-gpios: backlight power GPIO
 - nvidia,panel-vdd-gpios: panel power GPIO

Example:

host1x {
	compatible = "nvidia,tegra20-host1x", "simple-bus";
	reg = <0x50000000 0x00024000>;
	interrupts = <0 65 0x04   /* mpcore syncpt */
			0 67 0x04>; /* mpcore general */

	#address-cells = <1>;
	#size-cells = <1>;
	status = "okay";

	ranges = <0x54000000 0x54000000 0x04000000>;

	dc@54200000 {
		compatible = "nvidia,tegra20-dc";
		reg = <0x54200000 0x00040000>;
		interrupts = <0 73 0x04>;
		status = "okay";

		rgb {
			status = "okay";
			nvidia,panel = <&lcd_panel>;
		};
	};
};

lcd_panel: panel {
	/* Seaboard has 1366x768 */
	clock = <70600000>;
	xres = <1366>;
	yres = <768>;
	left-margin = <58>;
	right-margin = <58>;
	hsync-len = <58>;
	lower-margin = <4>;
	upper-margin = <4>;
	vsync-len = <4>;
	hsync-active-high;
	nvidia,bits-per-pixel = <16>;
	nvidia,pwm = <&pwm 2 0>;
	nvidia,backlight-enable-gpios = <&gpio 28 0>;	/* PD4 */
	nvidia,lvds-shutdown-gpios = <&gpio 10 0>;	/* PB2 */
	nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
	nvidia,panel-vdd-gpios = <&gpio 22 0>;		/* PC6 */
	nvidia,panel-timings = <400 4 203 17 15>;
};