1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
/*
* K2G EVM : Board initialization
*
* (C) Copyright 2015
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/ti-common/keystone_net.h>
#include <asm/arch/psc_defs.h>
#include <asm/arch/mmc_host_def.h>
#include "mux-k2g.h"
#define SYS_CLK 24000000
unsigned int external_clk[ext_clk_count] = {
[sys_clk] = SYS_CLK,
[pa_clk] = SYS_CLK,
[tetris_clk] = SYS_CLK,
[ddr3a_clk] = SYS_CLK,
[uart_clk] = SYS_CLK,
};
static struct pll_init_data main_pll_config = {MAIN_PLL, 100, 1, 4};
static struct pll_init_data tetris_pll_config = {TETRIS_PLL, 100, 1, 4};
static struct pll_init_data uart_pll_config = {UART_PLL, 64, 1, 4};
static struct pll_init_data nss_pll_config = {NSS_PLL, 250, 3, 2};
static struct pll_init_data ddr3_pll_config = {DDR3A_PLL, 250, 3, 10};
struct pll_init_data *get_pll_init_data(int pll)
{
struct pll_init_data *data = NULL;
switch (pll) {
case MAIN_PLL:
data = &main_pll_config;
break;
case TETRIS_PLL:
data = &tetris_pll_config;
break;
case NSS_PLL:
data = &nss_pll_config;
break;
case UART_PLL:
data = &uart_pll_config;
break;
case DDR3_PLL:
data = &ddr3_pll_config;
break;
default:
data = NULL;
}
return data;
}
s16 divn_val[16] = {
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
};
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
if (psc_enable_module(KS2_LPSC_MMC)) {
printf("%s module enabled failed\n", __func__);
return -1;
}
omap_mmc_init(0, 0, 0, -1, -1);
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
init_plls();
k2g_mux_config();
/* deassert FLASH_HOLD */
clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
BIT(9));
setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
BIT(9));
return 0;
}
#endif
#ifdef CONFIG_SPL_BUILD
void spl_init_keystone_plls(void)
{
init_plls();
}
#endif
#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
struct eth_priv_t eth_priv_cfg[] = {
{
.int_name = "K2G_EMAC",
.rx_flow = 0,
.phy_addr = 0,
.slave_port = 1,
.sgmii_link_type = SGMII_LINK_MAC_PHY,
.phy_if = PHY_INTERFACE_MODE_RGMII,
},
};
int get_num_eth_ports(void)
{
return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
}
#endif
|
