summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-sunxi
AgeCommit message (Expand)Author
2016-09-18sun9i: armadillo: set CLKB_OUT and reset USB hubsKlaus Goger
2016-09-18sun9i: improved clock setup for better boot reliabilityPhilipp Tomsich
2016-09-18sunxi: Support chip-id reading on sun9i (A80)Philipp Tomsich
2016-09-18sunxi: enable SPL for sun9iPhilipp Tomsich
2016-09-18sunxi: add initial clock setup for sun9i for SPLPhilipp Tomsich
2016-09-18sunxi: issue a MMC hardware reset on core_initPhilipp Tomsich
2016-09-18sunxi: Support GbE controller (GMAC) for sun9i (A80)Philipp Tomsich
2016-09-18sunxi: Support UART4 on A80 (sun9i) as system consolePhilipp Tomsich
2016-09-18sunxi: add gtbus-initialisation for sun9iPhilipp Tomsich
2016-09-18sunxi: DRAM initialisation for sun9iPhilipp Tomsich
2016-09-18sunxi: Fix gmac not working due to cpu_eth_init no longer being calledHans de Goede
2016-09-18sunxi: Support SID e-fuses on A83T and H3Chen-Yu Tsai
2016-02-23sunxi: H3: Add support for the host usb-physJelle van der Waa
2016-01-26sunxi: Add support for LPDDR3 for A83TVishnu Patekar
2016-01-26sunxi: Groundwork to support new dram type for A83TVishnu Patekar
2016-01-26sunxi: Support H3 CCU security switchesChen-Yu Tsai
2016-01-26sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3Chen-Yu Tsai
2016-01-21sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa
2015-12-10sunxi: Add support for Allwinner A83T DRAMvishnupatekar
2015-12-10sunxi: clk: add basic clocks for A83Tvishnupatekar
2015-12-10sunxi: Add support for UART0 in PB pin group on A83Tvishnupatekar
2015-12-10sunxi: Set AHB1 clock to PLL6/3 on all clock_sun6i.h using SoCsHans de Goede
2015-11-22sunxi: clock: Set AHB1 clock frequency to 200MHz on Allwinner H3Siarhei Siamashka
2015-11-22sunxi: Add H3 DRAM initialization supportJens Kuske
2015-11-22sunxi: Add basic H3 supportJens Kuske
2015-09-29sunxi: retrieve FEL-provided values to environment variablesBernhard Nortmann
2015-09-29sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variantBernhard Nortmann
2015-09-29sunxi: move SPL-related definitions to platform-specific includeBernhard Nortmann
2015-08-31sunxi: Enable non-secure access to RTC on sun6i (A31s)Chen-Yu Tsai
2015-08-14sun6i: clock: Add support for the mipi pllHans de Goede
2015-08-14sunxi: clock: Add clock_get_pll3() helper functionHans de Goede
2015-08-14sunxi: display: Fix composite video out on sun5iHans de Goede
2015-08-08sunxi: display: Add a few extra register and constant definesHans de Goede
2015-08-08sunxi: usb-phy: Never power off the usb portsHans de Goede
2015-08-08sunxi: nand: Add pinmux and clock settings for NAND supportKarol Gugala
2015-08-05usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSBPaul Kocialkowski
2015-07-25sunxi: musb: Move musb config and platdata to the sunxi-musb glueHans de Goede
2015-07-25sunxi: usb-phy: Add support for reading otg id pin valueHans de Goede
2015-07-24sunxi: Create helper function veryfing valid boot signature on MMCDaniel Kochmański
2015-07-05sunxi: Add support for UART0 in PB pin group on A33Chen-Yu Tsai
2015-06-28Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal N...Ian Campbell
2015-05-29sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memoryDaniel Kochmański
2015-05-29sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMARoy Spliet
2015-05-29sunxi: Add DMA definitionsRoy Spliet
2015-05-29sun9i: Basic sun9i (A80) supportHans de Goede
2015-05-19sunxi: video: Fix lvds panel support for sun6i+Hans de Goede
2015-05-19sunxi: Make DRAM_ODT_EN Kconfig setting a boolHans de Goede
2015-05-19sunxi: add support for UART2 on A23/A33Laurent Itti
2015-05-14sunxi: ohci: Add ohci usb host controller supportHans de Goede
2015-05-04sunxi: usb: Do not call phy_probe from hcd codeHans de Goede
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-09 18:50:35 +0000