diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/adi_gpio2.c | 440 | ||||
| -rw-r--r-- | drivers/net/bfin_mac.c | 2 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/serial_bfin.c | 411 | ||||
| -rw-r--r-- | drivers/spi/bfin_spi.c | 105 | ||||
| -rw-r--r-- | drivers/watchdog/Makefile | 1 | ||||
| -rw-r--r-- | drivers/watchdog/bfin_wdt.c | 26 |
8 files changed, 883 insertions, 104 deletions
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 830e8e691a..f77c1ec1ef 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -48,6 +48,7 @@ COBJS-$(CONFIG_DB8500_GPIO) += db8500_gpio.o COBJS-$(CONFIG_BCM2835_GPIO) += bcm2835_gpio.o COBJS-$(CONFIG_S3C2440_GPIO) += s3c2440_gpio.o COBJS-$(CONFIG_XILINX_GPIO) += xilinx_gpio.o +COBJS-$(CONFIG_ADI_GPIO2) += adi_gpio2.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/gpio/adi_gpio2.c b/drivers/gpio/adi_gpio2.c new file mode 100644 index 0000000000..7a034eba12 --- /dev/null +++ b/drivers/gpio/adi_gpio2.c @@ -0,0 +1,440 @@ +/* + * ADI GPIO2 Abstraction Layer + * Support BF54x, BF60x and future processors. + * + * Copyright 2008-2013 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/portmux.h> + +static struct gpio_port_t * const gpio_array[] = { + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, +#if defined(CONFIG_BF54x) + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +#endif +}; + +#define RESOURCE_LABEL_SIZE 16 + +static struct str_ident { + char name[RESOURCE_LABEL_SIZE]; +} str_ident[MAX_RESOURCES]; + +static void gpio_error(unsigned gpio) +{ + printf("adi_gpio2: GPIO %d wasn't requested!\n", gpio); +} + +static void set_label(unsigned short ident, const char *label) +{ + if (label) { + strncpy(str_ident[ident].name, label, + RESOURCE_LABEL_SIZE); + str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; + } +} + +static char *get_label(unsigned short ident) +{ + return *str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"; +} + +static int cmp_label(unsigned short ident, const char *label) +{ + if (label == NULL) + printf("adi_gpio2: please provide none-null label\n"); + + if (label) + return strcmp(str_ident[ident].name, label); + else + return -EINVAL; +} + +#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)] +#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i)) +#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i)) +#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i)) +#define DECLARE_RESERVED_MAP(m, c) unsigned short reserved_##m##_map[c] + +static DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM); +static DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES)); + +inline int check_gpio(unsigned gpio) +{ +#if defined(CONFIG_BF54x) + if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || + gpio == GPIO_PH14 || gpio == GPIO_PH15 || + gpio == GPIO_PJ14 || gpio == GPIO_PJ15) + return -EINVAL; +#endif + if (gpio >= MAX_GPIOS) + return -EINVAL; + return 0; +} + +static void port_setup(unsigned gpio, unsigned short usage) +{ +#if defined(CONFIG_BF54x) + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); +#else + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio); +#endif + SSYNC(); +} + +inline void portmux_setup(unsigned short per) +{ + u32 pmux; + u16 ident = P_IDENT(per); + u16 function = P_FUNCT2MUX(per); + + pmux = gpio_array[gpio_bank(ident)]->port_mux; + + pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); + + gpio_array[gpio_bank(ident)]->port_mux = pmux; +} + +inline u16 get_portmux(unsigned short per) +{ + u32 pmux; + u16 ident = P_IDENT(per); + + pmux = gpio_array[gpio_bank(ident)]->port_mux; + + return pmux >> (2 * gpio_sub_n(ident)) & 0x3; +} + +unsigned short get_gpio_dir(unsigned gpio) +{ + return 0x01 & + (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)); +} + +/*********************************************************** +* +* FUNCTIONS: Peripheral Resource Allocation +* and PortMux Setup +* +* INPUTS/OUTPUTS: +* per Peripheral Identifier +* label String +* +* DESCRIPTION: Peripheral Resource Allocation and Setup API +**************************************************************/ + +int peripheral_request(unsigned short per, const char *label) +{ + unsigned short ident = P_IDENT(per); + + /* + * Don't cares are pins with only one dedicated function + */ + + if (per & P_DONTCARE) + return 0; + + if (!(per & P_DEFINED)) + return -ENODEV; + + BUG_ON(ident >= MAX_RESOURCES); + + /* If a pin can be muxed as either GPIO or peripheral, make + * sure it is not already a GPIO pin when we request it. + */ + if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) { + printf("%s: Peripheral %d is already reserved as GPIO by %s!\n", + __func__, ident, get_label(ident)); + return -EBUSY; + } + + if (unlikely(is_reserved(peri, ident, 1))) { + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ + + if (!((per & P_MAYSHARE) && + get_portmux(per) == P_FUNCT2MUX(per))) { + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ + + if (cmp_label(ident, label) == 0) + goto anyway; + + printf("%s: Peripheral %d function %d is already " + "reserved by %s!\n", __func__, ident, + P_FUNCT2MUX(per), get_label(ident)); + return -EBUSY; + } + } + + anyway: + reserve(peri, ident); + + portmux_setup(per); + port_setup(ident, PERIPHERAL_USAGE); + + set_label(ident, label); + + return 0; +} + +int peripheral_request_list(const unsigned short per[], const char *label) +{ + u16 cnt; + int ret; + + for (cnt = 0; per[cnt] != 0; cnt++) { + ret = peripheral_request(per[cnt], label); + + if (ret < 0) { + for (; cnt > 0; cnt--) + peripheral_free(per[cnt - 1]); + + return ret; + } + } + + return 0; +} + +void peripheral_free(unsigned short per) +{ + unsigned short ident = P_IDENT(per); + + if (per & P_DONTCARE) + return; + + if (!(per & P_DEFINED)) + return; + + if (unlikely(!is_reserved(peri, ident, 0))) + return; + + if (!(per & P_MAYSHARE)) + port_setup(ident, GPIO_USAGE); + + unreserve(peri, ident); + + set_label(ident, "free"); +} + +void peripheral_free_list(const unsigned short per[]) +{ + u16 cnt; + for (cnt = 0; per[cnt] != 0; cnt++) + peripheral_free(per[cnt]); +} + +/*********************************************************** +* +* FUNCTIONS: GPIO Driver +* +* INPUTS/OUTPUTS: +* gpio PIO Number between 0 and MAX_GPIOS +* label String +* +* DESCRIPTION: GPIO Driver API +**************************************************************/ + +int gpio_request(unsigned gpio, const char *label) +{ + if (check_gpio(gpio) < 0) + return -EINVAL; + + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) + return 0; + + if (unlikely(is_reserved(gpio, gpio, 1))) { + printf("adi_gpio2: GPIO %d is already reserved by %s!\n", + gpio, get_label(gpio)); + return -EBUSY; + } + if (unlikely(is_reserved(peri, gpio, 1))) { + printf("adi_gpio2: GPIO %d is already reserved as Peripheral " + "by %s!\n", gpio, get_label(gpio)); + return -EBUSY; + } + + reserve(gpio, gpio); + set_label(gpio, label); + + port_setup(gpio, GPIO_USAGE); + + return 0; +} + +int gpio_free(unsigned gpio) +{ + if (check_gpio(gpio) < 0) + return -1; + + if (unlikely(!is_reserved(gpio, gpio, 0))) { + gpio_error(gpio); + return -1; + } + + unreserve(gpio, gpio); + + set_label(gpio, "free"); + + return 0; +} + +#ifdef ADI_SPECIAL_GPIO_BANKS +static DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES)); + +int special_gpio_request(unsigned gpio, const char *label) +{ + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) + return 0; + + if (unlikely(is_reserved(special_gpio, gpio, 1))) { + printf("adi_gpio2: GPIO %d is already reserved by %s!\n", + gpio, get_label(gpio)); + return -EBUSY; + } + if (unlikely(is_reserved(peri, gpio, 1))) { + printf("adi_gpio2: GPIO %d is already reserved as Peripheral " + "by %s!\n", gpio, get_label(gpio)); + + return -EBUSY; + } + + reserve(special_gpio, gpio); + reserve(peri, gpio); + + set_label(gpio, label); + port_setup(gpio, GPIO_USAGE); + + return 0; +} + +void special_gpio_free(unsigned gpio) +{ + if (unlikely(!is_reserved(special_gpio, gpio, 0))) { + gpio_error(gpio); + return; + } + + reserve(special_gpio, gpio); + reserve(peri, gpio); + set_label(gpio, "free"); +} +#endif + +static inline void __gpio_direction_input(unsigned gpio) +{ + gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); +#if defined(CONFIG_BF54x) + gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio); +#endif +} + +int gpio_direction_input(unsigned gpio) +{ + unsigned long flags; + + if (!is_reserved(gpio, gpio, 0)) { + gpio_error(gpio); + return -EINVAL; + } + + local_irq_save(flags); + __gpio_direction_input(gpio); + local_irq_restore(flags); + + return 0; +} + +int gpio_set_value(unsigned gpio, int arg) +{ + if (arg) + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + + return 0; +} + +int gpio_direction_output(unsigned gpio, int value) +{ + unsigned long flags; + + if (!is_reserved(gpio, gpio, 0)) { + gpio_error(gpio); + return -EINVAL; + } + + local_irq_save(flags); + +#if defined(CONFIG_BF54x) + gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio); +#endif + gpio_set_value(gpio, value); + gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); + + local_irq_restore(flags); + + return 0; +} + +int gpio_get_value(unsigned gpio) +{ + return 1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)); +} + +void gpio_labels(void) +{ + int c, gpio; + + for (c = 0; c < MAX_RESOURCES; c++) { + gpio = is_reserved(gpio, c, 1); + if (!check_gpio(c) && gpio) + printf("GPIO_%d:\t%s\tGPIO %s\n", c, get_label(c), + get_gpio_dir(c) ? "OUTPUT" : "INPUT"); + else if (is_reserved(peri, c, 1)) + printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c)); + else + continue; + } +} diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index c63398ebf8..0ffd59d497 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -122,8 +122,6 @@ static int bfin_EMAC_send(struct eth_device *dev, void *packet, int length) { int i; int result = 0; - unsigned int *buf; - buf = (unsigned int *)packet; if (length <= 0) { printf("Ethernet: bad packet size: %d\n", length); diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index fbc4e97e98..442b7ea0df 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -52,6 +52,7 @@ COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o COBJS-$(CONFIG_SANDBOX_SERIAL) += sandbox.o COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o +COBJS-$(CONFIG_BFIN_SERIAL) += serial_bfin.o ifndef CONFIG_SPL_BUILD COBJS-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/serial_bfin.c b/drivers/serial/serial_bfin.c new file mode 100644 index 0000000000..0443b8427a --- /dev/null +++ b/drivers/serial/serial_bfin.c @@ -0,0 +1,411 @@ +/* + * U-boot - serial.c Blackfin Serial Driver + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on: + * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. + * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> + * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> + * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328 version serial driver imlpementation which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +/* Anomaly notes: + * 05000086 - we don't support autobaud + * 05000099 - we only use DR bit, so losing others is not a problem + * 05000100 - we don't use the UART_IIR register + * 05000215 - we poll the uart (no dma/interrupts) + * 05000225 - no workaround possible, but this shouldnt cause errors ... + * 05000230 - we tweak the baud rate calculation slightly + * 05000231 - we always use 1 stop bit + * 05000309 - we always enable the uart before we modify it in anyway + * 05000350 - we always enable the uart regardless of boot mode + * 05000363 - we don't support break signals, so don't generate one + */ + +#include <common.h> +#include <post.h> +#include <watchdog.h> +#include <serial.h> +#include <linux/compiler.h> +#include <asm/blackfin.h> +#include <asm/serial.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_UART_CONSOLE + +#ifdef CONFIG_DEBUG_SERIAL +static uart_lsr_t cached_lsr[256]; +static uart_lsr_t cached_rbr[256]; +static size_t cache_count; + +/* The LSR is read-to-clear on some parts, so we have to make sure status + * bits aren't inadvertently lost when doing various tests. This also + * works around anomaly 05000099 at the same time by keeping a cumulative + * tally of all the status bits. + */ +static uart_lsr_t uart_lsr_save; +static uart_lsr_t uart_lsr_read(uint32_t uart_base) +{ + uart_lsr_t lsr = _lsr_read(pUART); + uart_lsr_save |= (lsr & (OE|PE|FE|BI)); + return lsr | uart_lsr_save; +} +/* Just do the clear for everyone since it can't hurt. */ +static void uart_lsr_clear(uint32_t uart_base) +{ + uart_lsr_save = 0; + _lsr_write(pUART, -1); +} +#else +/* When debugging is disabled, we only care about the DR bit, so if other + * bits get set/cleared, we don't really care since we don't read them + * anyways (and thus anomaly 05000099 is irrelevant). + */ +static inline uart_lsr_t uart_lsr_read(uint32_t uart_base) +{ + return _lsr_read(pUART); +} +static void uart_lsr_clear(uint32_t uart_base) +{ + _lsr_write(pUART, -1); +} +#endif + +static void uart_putc(uint32_t uart_base, const char c) +{ + /* send a \r for compatibility */ + if (c == '\n') + serial_putc('\r'); + + WATCHDOG_RESET(); + + /* wait for the hardware fifo to clear up */ + while (!(uart_lsr_read(uart_base) & THRE)) + continue; + + /* queue the character for transmission */ + bfin_write(&pUART->thr, c); + SSYNC(); + + WATCHDOG_RESET(); +} + +static int uart_tstc(uint32_t uart_base) +{ + WATCHDOG_RESET(); + return (uart_lsr_read(uart_base) & DR) ? 1 : 0; +} + +static int uart_getc(uint32_t uart_base) +{ + uint16_t uart_rbr_val; + + /* wait for data ! */ + while (!uart_tstc(uart_base)) + continue; + + /* grab the new byte */ + uart_rbr_val = bfin_read(&pUART->rbr); + +#ifdef CONFIG_DEBUG_SERIAL + /* grab & clear the LSR */ + uart_lsr_t uart_lsr_val = uart_lsr_read(uart_base); + + cached_lsr[cache_count] = uart_lsr_val; + cached_rbr[cache_count] = uart_rbr_val; + cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr); + + if (uart_lsr_val & (OE|PE|FE|BI)) { + printf("\n[SERIAL ERROR]\n"); + do { + --cache_count; + printf("\t%3zu: RBR=0x%02x LSR=0x%02x\n", cache_count, + cached_rbr[cache_count], cached_lsr[cache_count]); + } while (cache_count > 0); + return -1; + } +#endif + uart_lsr_clear(uart_base); + + return uart_rbr_val; +} + +#if CONFIG_POST & CONFIG_SYS_POST_UART +# define LOOP(x) x +#else +# define LOOP(x) +#endif + +#if BFIN_UART_HW_VER < 4 + +LOOP( +static void uart_loop(uint32_t uart_base, int state) +{ + u16 mcr; + + /* Drain the TX fifo first so bytes don't come back */ + while (!(uart_lsr_read(uart_base) & TEMT)) + continue; + + mcr = bfin_read(&pUART->mcr); + if (state) + mcr |= LOOP_ENA | MRTS; + else + mcr &= ~(LOOP_ENA | MRTS); + bfin_write(&pUART->mcr, mcr); +} +) + +#else + +LOOP( +static void uart_loop(uint32_t uart_base, int state) +{ + u32 control; + + /* Drain the TX fifo first so bytes don't come back */ + while (!(uart_lsr_read(uart_base) & TEMT)) + continue; + + control = bfin_read(&pUART->control); + if (state) + control |= LOOP_ENA | MRTS; + else + control &= ~(LOOP_ENA | MRTS); + bfin_write(&pUART->control, control); +} +) + +#endif + +static inline void __serial_set_baud(uint32_t uart_base, uint32_t baud) +{ +#ifdef CONFIG_DEBUG_EARLY_SERIAL + serial_early_set_baud(uart_base, baud); +#else + uint16_t divisor = (get_uart_clk() + (baud * 8)) / (baud * 16) + - ANOMALY_05000230; + + /* Program the divisor to get the baud rate we want */ + serial_set_divisor(uart_base, divisor); +#endif +} + +static void uart_puts(uint32_t uart_base, const char *s) +{ + while (*s) + uart_putc(uart_base, *s++); +} + +#define DECL_BFIN_UART(n) \ +static int uart##n##_init(void) \ +{ \ + const unsigned short pins[] = { _P_UART(n, RX), _P_UART(n, TX), 0, }; \ + peripheral_request_list(pins, "bfin-uart"); \ + uart_init(MMR_UART(n)); \ + __serial_set_baud(MMR_UART(n), gd->baudrate); \ + uart_lsr_clear(MMR_UART(n)); \ + return 0; \ +} \ +\ +static int uart##n##_uninit(void) \ +{ \ + return serial_early_uninit(MMR_UART(n)); \ +} \ +\ +static void uart##n##_setbrg(void) \ +{ \ + __serial_set_baud(MMR_UART(n), gd->baudrate); \ +} \ +\ +static int uart##n##_getc(void) \ +{ \ + return uart_getc(MMR_UART(n)); \ +} \ +\ +static int uart##n##_tstc(void) \ +{ \ + return uart_tstc(MMR_UART(n)); \ +} \ +\ +static void uart##n##_putc(const char c) \ +{ \ + uart_putc(MMR_UART(n), c); \ +} \ +\ +static void uart##n##_puts(const char *s) \ +{ \ + uart_puts(MMR_UART(n), s); \ +} \ +\ +LOOP( \ +static void uart##n##_loop(int state) \ +{ \ + uart_loop(MMR_UART(n), state); \ +} \ +) \ +\ +struct serial_device bfin_serial##n##_device = { \ + .name = "bfin_uart"#n, \ + .start = uart##n##_init, \ + .stop = uart##n##_uninit, \ + .setbrg = uart##n##_setbrg, \ + .getc = uart##n##_getc, \ + .tstc = uart##n##_tstc, \ + .putc = uart##n##_putc, \ + .puts = uart##n##_puts, \ + LOOP(.loop = uart##n##_loop) \ +}; + +#ifdef UART0_RBR +DECL_BFIN_UART(0) +#endif +#ifdef UART1_RBR +DECL_BFIN_UART(1) +#endif +#ifdef UART2_RBR +DECL_BFIN_UART(2) +#endif +#ifdef UART3_RBR +DECL_BFIN_UART(3) +#endif + +__weak struct serial_device *default_serial_console(void) +{ +#if CONFIG_UART_CONSOLE == 0 + return &bfin_serial0_device; +#elif CONFIG_UART_CONSOLE == 1 + return &bfin_serial1_device; +#elif CONFIG_UART_CONSOLE == 2 + return &bfin_serial2_device; +#elif CONFIG_UART_CONSOLE == 3 + return &bfin_serial3_device; +#endif +} + +void bfin_serial_initialize(void) +{ +#ifdef UART0_RBR + serial_register(&bfin_serial0_device); +#endif +#ifdef UART1_RBR + serial_register(&bfin_serial1_device); +#endif +#ifdef UART2_RBR + serial_register(&bfin_serial2_device); +#endif +#ifdef UART3_RBR + serial_register(&bfin_serial3_device); +#endif +} + +#ifdef CONFIG_DEBUG_EARLY_SERIAL +inline void uart_early_putc(uint32_t uart_base, const char c) +{ + /* send a \r for compatibility */ + if (c == '\n') + uart_early_putc(uart_base, '\r'); + + /* wait for the hardware fifo to clear up */ + while (!(_lsr_read(pUART) & THRE)) + continue; + + /* queue the character for transmission */ + bfin_write(&pUART->thr, c); + SSYNC(); +} + +void uart_early_puts(const char *s) +{ + while (*s) + uart_early_putc(UART_BASE, *s++); +} + +/* Symbol for our assembly to call. */ +void _serial_early_set_baud(uint32_t baud) +{ + serial_early_set_baud(UART_BASE, baud); +} + +/* Symbol for our assembly to call. */ +void _serial_early_init(void) +{ + serial_early_init(UART_BASE); +} +#endif + +#elif defined(CONFIG_UART_MEM) + +char serial_logbuf[CONFIG_UART_MEM]; +char *serial_logbuf_head = serial_logbuf; + +int serial_mem_init(void) +{ + serial_logbuf_head = serial_logbuf; + return 0; +} + +void serial_mem_setbrg(void) +{ +} + +int serial_mem_tstc(void) +{ + return 0; +} + +int serial_mem_getc(void) +{ + return 0; +} + +void serial_mem_putc(const char c) +{ + *serial_logbuf_head = c; + if (++serial_logbuf_head == serial_logbuf + CONFIG_UART_MEM) + serial_logbuf_head = serial_logbuf; +} + +void serial_mem_puts(const char *s) +{ + while (*s) + serial_putc(*s++); +} + +struct serial_device bfin_serial_mem_device = { + .name = "bfin_uart_mem", + .start = serial_mem_init, + .setbrg = serial_mem_setbrg, + .getc = serial_mem_getc, + .tstc = serial_mem_tstc, + .putc = serial_mem_putc, + .puts = serial_mem_puts, +}; + + +__weak struct serial_device *default_serial_console(void) +{ + return &bfin_serial_mem_device; +} + +void bfin_serial_initialize(void) +{ + serial_register(&bfin_serial_mem_device); +} +#endif /* CONFIG_UART_MEM */ diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c index ab2e8b998b..a9a4d92c3e 100644 --- a/drivers/spi/bfin_spi.c +++ b/drivers/spi/bfin_spi.c @@ -13,7 +13,6 @@ #include <spi.h> #include <asm/blackfin.h> -#include <asm/dma.h> #include <asm/gpio.h> #include <asm/portmux.h> #include <asm/mach-common/bits/spi.h> @@ -242,109 +241,15 @@ void spi_release_bus(struct spi_slave *slave) SSYNC(); } -#ifdef __ADSPBF54x__ -# define SPI_DMA_BASE DMA4_NEXT_DESC_PTR -#elif defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) || \ - defined(__ADSPBF538__) || defined(__ADSPBF539__) -# define SPI_DMA_BASE DMA5_NEXT_DESC_PTR -#elif defined(__ADSPBF561__) -# define SPI_DMA_BASE DMA2_4_NEXT_DESC_PTR -#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \ - defined(__ADSPBF52x__) || defined(__ADSPBF51x__) -# define SPI_DMA_BASE DMA7_NEXT_DESC_PTR -# elif defined(__ADSPBF50x__) -# define SPI_DMA_BASE DMA6_NEXT_DESC_PTR -#else -# error "Please provide SPI DMA channel defines" -#endif -static volatile struct dma_register *dma = (void *)SPI_DMA_BASE; - #ifndef CONFIG_BFIN_SPI_IDLE_VAL # define CONFIG_BFIN_SPI_IDLE_VAL 0xff #endif -#ifdef CONFIG_BFIN_SPI_NO_DMA -# define SPI_DMA 0 -#else -# define SPI_DMA 1 -#endif - -static int spi_dma_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx, - uint bytes) -{ - int ret = -1; - u16 ndsize, spi_config, dma_config; - struct dmasg dmasg[2]; - const u8 *buf; - - if (tx) { - debug("%s: doing half duplex TX\n", __func__); - buf = tx; - spi_config = TDBR_DMA; - dma_config = 0; - } else { - debug("%s: doing half duplex RX\n", __func__); - buf = rx; - spi_config = RDBR_DMA; - dma_config = WNR; - } - - dmasg[0].start_addr = (unsigned long)buf; - dmasg[0].x_modify = 1; - dma_config |= WDSIZE_8 | DMAEN; - if (bytes <= 65536) { - blackfin_dcache_flush_invalidate_range(buf, buf + bytes); - ndsize = NDSIZE_5; - dmasg[0].cfg = NDSIZE_0 | dma_config | FLOW_STOP | DI_EN; - dmasg[0].x_count = bytes; - } else { - blackfin_dcache_flush_invalidate_range(buf, buf + 65536 - 1); - ndsize = NDSIZE_7; - dmasg[0].cfg = NDSIZE_5 | dma_config | FLOW_ARRAY | DMA2D; - dmasg[0].x_count = 0; /* 2^16 */ - dmasg[0].y_count = bytes >> 16; /* count / 2^16 */ - dmasg[0].y_modify = 1; - dmasg[1].start_addr = (unsigned long)(buf + (bytes & ~0xFFFF)); - dmasg[1].cfg = NDSIZE_0 | dma_config | FLOW_STOP | DI_EN; - dmasg[1].x_count = bytes & 0xFFFF; /* count % 2^16 */ - dmasg[1].x_modify = 1; - } - - dma->cfg = 0; - dma->irq_status = DMA_DONE | DMA_ERR; - dma->curr_desc_ptr = dmasg; - write_SPI_CTL(bss, (bss->ctl & ~TDBR_CORE)); - write_SPI_STAT(bss, -1); - SSYNC(); - - write_SPI_TDBR(bss, CONFIG_BFIN_SPI_IDLE_VAL); - dma->cfg = ndsize | FLOW_ARRAY | DMAEN; - write_SPI_CTL(bss, (bss->ctl & ~TDBR_CORE) | spi_config); - SSYNC(); - - /* - * We already invalidated the first 64k, - * now while we just wait invalidate the remaining part. - * Its not likely that the DMA is going to overtake - */ - if (bytes > 65536) - blackfin_dcache_flush_invalidate_range(buf + 65536, buf + bytes); - - while (!(dma->irq_status & DMA_DONE)) - if (ctrlc()) - goto done; - - dma->cfg = 0; - - ret = 0; - done: - write_SPI_CTL(bss, bss->ctl); - return ret; -} - static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx, uint bytes) { + /* discard invalid data and clear RXS */ + read_SPI_RDBR(bss); /* todo: take advantage of hardware fifos */ while (bytes--) { u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL); @@ -393,11 +298,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, if (flags & SPI_XFER_BEGIN) spi_cs_activate(slave); - /* TX DMA doesn't work quite right */ - if (SPI_DMA && bytes > 6 && (!tx /*|| !rx*/)) - ret = spi_dma_xfer(bss, tx, rx, bytes); - else - ret = spi_pio_xfer(bss, tx, rx, bytes); + ret = spi_pio_xfer(bss, tx, rx, bytes); done: if (flags & SPI_XFER_END) diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 13e7c37686..d57578df6c 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -33,6 +33,7 @@ endif COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o COBJS-$(CONFIG_S5P) += s5p_wdt.o COBJS-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o +COBJS-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c new file mode 100644 index 0000000000..7a6756b2e5 --- /dev/null +++ b/drivers/watchdog/bfin_wdt.c @@ -0,0 +1,26 @@ +/* + * watchdog.c - driver for Blackfin on-chip watchdog + * + * Copyright (c) 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <watchdog.h> +#include <asm/blackfin.h> +#include <asm/mach-common/bits/watchdog.h> + +void hw_watchdog_reset(void) +{ + bfin_write_WDOG_STAT(0); +} + +void hw_watchdog_init(void) +{ + bfin_write_WDOG_CTL(WDDIS); + SSYNC(); + bfin_write_WDOG_CNT(CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000 * get_sclk()); + hw_watchdog_reset(); + bfin_write_WDOG_CTL(WDEN); +} |